-
The Realization of a Gas Puff Imaging System on the Wendelstein 7-X Stellarator
Authors:
J. L. Terry,
A. von Stechow,
S. G. Baek,
S. B. Ballinger,
O. Grulke,
C. von Sehren,
R. Laube,
C. Killer,
F. Scharmer,
K. J. Brunner,
J. Knauer,
S. Bois,
the W7-X Team
Abstract:
A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distanc…
▽ More
A system for studying the spatio-temporal dynamics of fluctuations in the boundary of the W7-X plasma using the Gas-Puff Imaging (GPI) technique has been designed, constructed, installed, and operated. This GPI system addresses a number of challenges specific to long-pulse superconducting devices like W7-X, including the long distance between the plasma and the vacuum vessel wall, the long distance between the plasma and diagnostic ports, the range of last closed flux surface locations for different magnetic configurations in W7-X, and management of heat loads on the system's plasma-facing components. The system features a pair of "converging-diverging" nozzles for partially collimating the gas puffed locally $\approx$135 mm radially outboard of the plasma boundary, a pop-up turning mirror for viewing the gas puff emission from the side (also acting as a shutter for the re-entrant vacuum window), and a high-throughput optical system that collects visible emission resulting from the interaction between the puffed gas and the plasma and directs it along a water-cooled re-entrant tube directly onto the 8 x 16 pixel detector array of the fast camera. The DEGAS 2 neutrals code was used to simulate the H$_α$ (656 nm) and the HeI (587 nm) line emission expected from well-characterized gas-puffs of H$_2$ and He and excited within typical edge plasma profiles in W7-X, thereby predicting line brightnesses used to reduce the risks associated with system sensitivity and placement of the field of view. Operation of GPI on W7-X shows excellent signal to noise ratios (>100) over the field of view for minimally perturbing gas puffs. The GPI system provides detailed measurements of the 2-dimensional (radial and poloidal) dynamics of plasma fluctuations in the W7-X edge, scrape-off layer, and in and around the magnetic islands that make up the island divertor configuration employed on W7-X.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
SoK: Decentralized Finance (DeFi) -- Fundamentals, Taxonomy and Risks
Authors:
Krzysztof Gogol,
Christian Killer,
Malte Schlosser,
Thomas Bocek,
Burkhard Stiller,
Claudio Tessone
Abstract:
Decentralized Finance (DeFi) refers to financial services that are not necessarily related to crypto-currencies. By employing blockchain for security and integrity, DeFi creates new possibilities that attract retail and institution users, including central banks. Given its novel applications and sophisticated designs, the distinction between DeFi services and understanding the risk involved is oft…
▽ More
Decentralized Finance (DeFi) refers to financial services that are not necessarily related to crypto-currencies. By employing blockchain for security and integrity, DeFi creates new possibilities that attract retail and institution users, including central banks. Given its novel applications and sophisticated designs, the distinction between DeFi services and understanding the risk involved is often complex. This work systematically presents the major categories of DeFi protocols that cover over 90\% of total value locked (TVL) in DeFi. It establishes a structured methodology to differentiate between DeFi protocols based on their design and architecture. Every DeFi protocol is classified into one of three groups: liquidity pools, pegged and synthetic tokens, and aggregator protocols, followed by risk analysis. In particular, we classify stablecoins, liquid staking tokens, and bridged (wrapped) assets as pegged tokens resembling similar risks. The full risk exposure of DeFi users is derived not only from the DeFi protocol design but also from how it is used and with which tokens.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Performance Analysis of Decentralized Physical Infrastructure Networks and Centralized Clouds
Authors:
Jan von der Assen,
Christian Killer,
Alessandro De Carli,
Burkhard Stiller
Abstract:
The advent of Decentralized Physical Infrastructure Networks (DePIN) represents a shift in the digital infrastructure of today's Internet. While Centralized Service Providers (CSP) monopolize cloud computing, DePINs aim to enhance data sovereignty and confidentiality and increase resilience against a single point of failure. Due to the novelty of the emerging field of DePIN, this work focuses on t…
▽ More
The advent of Decentralized Physical Infrastructure Networks (DePIN) represents a shift in the digital infrastructure of today's Internet. While Centralized Service Providers (CSP) monopolize cloud computing, DePINs aim to enhance data sovereignty and confidentiality and increase resilience against a single point of failure. Due to the novelty of the emerging field of DePIN, this work focuses on the potential of DePINs to disrupt traditional centralized architectures by taking advantage of the Internet of Things (IoT) devices and crypto-economic design in combination with blockchains. This combination yields Acurast, a more distributed, resilient, and user-centric physical infrastructure deployment. Through comparative analysis with centralized systems, particularly in serverless computing contexts, this work seeks to lay the first steps in scientifically evaluating DePINs and quantitatively comparing them in terms of efficiency and effectiveness in real-world applications. The findings suggest DePINs' potential to (i) reduce trust assumptions and physically decentralized infrastructure, (ii) increase efficiency and performance simultaneously while improving the computation's (iii) confidentiality and verifiability.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Asset-centric Threat Modeling for AI-based Systems
Authors:
Jan von der Assen,
Jamo Sharif,
Chao Feng,
Christian Killer,
Gérôme Bovet,
Burkhard Stiller
Abstract:
Threat modeling is a popular method to securely develop systems by achieving awareness of potential areas of future damage caused by adversaries. However, threat modeling for systems relying on Artificial Intelligence is still not well explored. While conventional threat modeling methods and tools did not address AI-related threats, research on this amalgamation still lacks solutions capable of gu…
▽ More
Threat modeling is a popular method to securely develop systems by achieving awareness of potential areas of future damage caused by adversaries. However, threat modeling for systems relying on Artificial Intelligence is still not well explored. While conventional threat modeling methods and tools did not address AI-related threats, research on this amalgamation still lacks solutions capable of guiding and automating the process, as well as providing evidence that the methods hold up in practice. Consequently, this paper presents ThreatFinderAI, an approach and tool providing guidance and automation to model AI-related assets, threats, countermeasures, and quantify residual risks. To evaluate the practicality of the approach, participants were tasked to recreate a threat model developed by cybersecurity experts of an AI-based healthcare platform. Secondly, the approach was used to identify and discuss strategic risks in an LLM-based application through a case study. Overall, the solution's usability was well-perceived and effectively supports threat identification and risk discussion.
△ Less
Submitted 3 June, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
On the interaction between the island divertor heat fluxes, the scrape-off layer radial electric field and the edge turbulence in Wendelstein 7-X plasmas
Authors:
E. Maragkoudakis,
D. Carralero,
T. Estrada,
T. Windisch,
Y. Gao,
C. Killer,
M. Jakubowski,
A. Puig Sitjes,
F. Pisano,
H. Sándor,
M. Vecsei,
S. Zoletnik,
A. Cappa,
the Wendelstein 7-X team
Abstract:
The formation of the radial electric field, $E_{\rm r}$ in the SOL has been experimentally studied for attached divertor conditions in stellarator W7-X. The main objective of this study is to test the validity in a complex 3D island divertor of simple models, typically developed in tokamaks, relating $E_{\rm r}$ to the sheath potential drop gradient at the target. Additionally, we investigate the…
▽ More
The formation of the radial electric field, $E_{\rm r}$ in the SOL has been experimentally studied for attached divertor conditions in stellarator W7-X. The main objective of this study is to test the validity in a complex 3D island divertor of simple models, typically developed in tokamaks, relating $E_{\rm r}$ to the sheath potential drop gradient at the target. Additionally, we investigate the effect of the edge $E_{\rm r}$ shear on the reduction of density fluctuation amplitude, a well-established phenomenon according to the existing bibliography. The main diagnostic for measurements in the SOL is a V-band Doppler reflectometer that can provide the measurement of the $E_{\rm r}$ and density fluctuations with good spatial resolution. Three-dimensional measurements of divertor parameters has been carried out using infrared cameras, with $λ_{\rm q}$ resulting a suitable proxy for the model-relevant $λ_{\rm T}$. In the investigated attached regimes, it is shown for the first time that the formation of the $E_{\rm r}$ in the SOL depends on parameters at the divertor, following a $E_{\rm r} \propto T_{\rm e} /λ_q$ qualitatively similar to that found in a tokamak. Then, from the analyzed plasmas, the observed $E_{\rm r}$ shear at the edge is linked to a moderate local reduction of the amplitude of density fluctuations.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Parametrisation of target heat flux distribution and study of transport parameters for boundary modelling in W7-X
Authors:
David Bold,
Felix Reimold,
Holger Niemann,
Yu Gao,
Marcin Jakubowski,
Carsten Killer,
Victoria R. Winters,
the W7-X team
Abstract:
Modelling the scrape-off layer of a stellarator is challenging due to the complex magnetic 3D geometry. The here presented study analyses simulations of the scrape-off layer (SOL) of the stellarator Wendelstein 7-X (W7-X) using the EMC3-EIRENE code for the magnetic standard configuration. Comparing with experimental observations, the transport model is validated. Based on the experimentally observ…
▽ More
Modelling the scrape-off layer of a stellarator is challenging due to the complex magnetic 3D geometry. The here presented study analyses simulations of the scrape-off layer (SOL) of the stellarator Wendelstein 7-X (W7-X) using the EMC3-EIRENE code for the magnetic standard configuration. Comparing with experimental observations, the transport model is validated. Based on the experimentally observed strike line width, the anomalous transport coefficients, used as input to the code are determined to around $0.2\,$m$^2/$s. This is however in disagreement with upstream measurements, where such small cross-field transport leads to temperatures higher than measured experimentally.
△ Less
Submitted 22 April, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Reciprocating probe measurements in the test divertor operation phase of Wendelstein 7-X
Authors:
Carsten Killer,
Philipp Drews,
Olaf Grulke,
Alexander Knieps,
Dirk Nicolai,
Guruparan Satheeswaren,
W7-X Team
Abstract:
Reciprocating probes are a classic and widespread tool for the investigation of the edge and Scrape-Off Layer of magnetic fusion plasmas. In the Wendelstein 7-X (W7-X) stellarator, the Multi-Purpose Manipulator serves as a multi-user platform for probe measurements of various kinds. This paper presents a review on reciprocating probe operation during the first operation phase of W7-X with a test d…
▽ More
Reciprocating probes are a classic and widespread tool for the investigation of the edge and Scrape-Off Layer of magnetic fusion plasmas. In the Wendelstein 7-X (W7-X) stellarator, the Multi-Purpose Manipulator serves as a multi-user platform for probe measurements of various kinds. This paper presents a review on reciprocating probe operation during the first operation phase of W7-X with a test divertor (2017-2018). It gives an overview of the diverse zoo of probe heads and presents lessons learned about probe operation in complex magnetic geometries, operation safety, and probe head design. A few examples of probe measurements with a focus on unexpected observations are presented.
△ Less
Submitted 11 January, 2022; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Proverum: A Hybrid Public Verifiability and Decentralized Identity Management
Authors:
Christian Killer,
Lucas Thorbecke,
Bruno Rodrigues,
Eder Scheid,
Muriel Franco,
Burkhard Stiller
Abstract:
Trust in electoral processes is fundamental for democracies. Further, the identity management of citizen data is crucial, because final tallies cannot be guaranteed without the assurance that every final vote was cast by an eligible voter. In order to establish a basis for a hybrid public verifiability of voting, this work (1) introduces Proverum, an approach combining a private environment based…
▽ More
Trust in electoral processes is fundamental for democracies. Further, the identity management of citizen data is crucial, because final tallies cannot be guaranteed without the assurance that every final vote was cast by an eligible voter. In order to establish a basis for a hybrid public verifiability of voting, this work (1) introduces Proverum, an approach combining a private environment based on private permissioned Distributed Ledgers with a public environment based on public Blockchains, (2) describes the application of the Proverum architecture to the Swiss Remote Postal Voting system, mitigating threats present in the current system, and (3) addresses successfully the decentralized identity management in a federalistic state.
△ Less
Submitted 22 August, 2020;
originally announced August 2020.
-
WeTrace -- A Privacy-preserving Mobile COVID-19 Tracing Approach and Application
Authors:
A. De Carli,
M. Franco,
A. Gassmann,
C. Killer,
B. Rodrigues,
E. Scheid,
D. Schoenbaechler,
B. Stiller
Abstract:
For the protection of people and society against harm and health threats -- especially for the COVID-19 pandemic -- a variety of different disciplines needs to be involved. The data collection of very basic and health-related data of individuals in today's highly mobile society does help to plan, protect, and identify next steps health authorities and governments can, shall, or need to plan for or…
▽ More
For the protection of people and society against harm and health threats -- especially for the COVID-19 pandemic -- a variety of different disciplines needs to be involved. The data collection of very basic and health-related data of individuals in today's highly mobile society does help to plan, protect, and identify next steps health authorities and governments can, shall, or need to plan for or even implement. Thus, every individual, every human, and every inhabitant of the world is the key player -- very different to many past crises'. And since the individual is involved -- all individuals -- his/her (a) health and (b) privacy shall be considered in a very carefully crafted balance, not overruling one aspect with another one or even prioritizing certain aspects. Privacy remains the key. Thus, the solution of the current pandemic's data collection can be based on a fully privacy-preserving application, which can be used by individuals on their mobile devices, such as smartphones, while maintaining at the same time their privacy. Additionally, respective data collected in such a fully distributed setting does help to confine the pandemic and can be achieved in a democratic and very open, but still and especially privacy-protecting world. Therefore, the WeTrace approach and application as described in this paper utilizes the Bluetooth Low Energy (BTE) communication channel, many modern mobile devices offer, where asymmetric cryptography is being applied to allows for the decyphering of a message for that destination it had been intended for. Since literally every other potential participant only listens to random data, even a brute force attack will not succeed. WeTrace and its Open Source implementation is the only known approach so far, which ensures that any receiver of a message knows that this is for him/her, but does not know who the original sender was.
△ Less
Submitted 19 April, 2020;
originally announced April 2020.
-
Validating the ASCOT modelling of NBI fast ions in Wendelstein 7-X stellarator
Authors:
S. Äkäslompolo,
P. Drewelow,
Y. Gao,
A. Ali,
C. Biedermann,
S. Bozhenkov,
C. P. Dhard,
M. Endler,
J. Fellinger,
O. P. Ford,
B. Geiger,
J. Geiger,
N. den Harderd,
D. Hartmann,
D. Hathiramani,
M. Isobe,
M. Jakubowski,
Y. Kazakov,
C. Killer,
S. Lazerson,
M. Mayerd,
P. McNeely,
D. Naujoks,
T. W. C. Neelis,
J. Kontula
, et al. (15 additional authors not shown)
Abstract:
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of pla…
▽ More
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of plasma facing components. The fast ion distribution function in the plasma and at the wall is being modelled with the ASCOT suite of codes. They calculate the ionisation of the injected neutrals and the consecutive slowing down process of the fast ions. The primary output of the code is the multidimensional fast ion distribution function within the plasma and the distribution of particle hit locations and velocities on the wall. Synthetic measurements based on ASCOT output are compared to experimental results to assess the validity of the modelling. This contribution presents an overview of the various fast ion measurements in 2018 and the current modelling status. The validation and data-analysis is on-going, but the wall load IR modelling already yield results that match with the experiments.
△ Less
Submitted 10 September, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.