-
METU Students' college life satisfaction
Authors:
Furkan Berk Danisman,
Ilyurek Kilic,
Gizem Sarul,
Sena Aktaş,
Niyousha Amini,
Osman Orcun Ada
Abstract:
The research was conducted to identify the factors that influence college students' satisfaction with their college experience. Firstly, the study was focused on the literature review to determine relevant factors that have been previously studied in the literature. Then, the survey analysis examined three main independent factors that have been found to be related to college students' satisfactio…
▽ More
The research was conducted to identify the factors that influence college students' satisfaction with their college experience. Firstly, the study was focused on the literature review to determine relevant factors that have been previously studied in the literature. Then, the survey analysis examined three main independent factors that have been found to be related to college students' satisfaction: Major Satisfaction, Social Self-Efficacy, and Academic Performance. The findings of the study suggested that the most important factor affecting students' satisfaction with their college experience is their satisfaction with their chosen major. This means that students who are satisfied with the major they have chosen are more likely to be overall satisfied with their college experience. It's worth noting that, while the study found that major satisfaction is the most crucial factor, it doesn't mean that other factors such as Social Self-Efficacy, Academic Performance, and Campus Life Satisfaction are not important. Based on these findings, it is recommend that students prioritize their major satisfaction when making college choices in order to maximize their overall satisfaction with their college experience.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Proton inelastic scattering reveals deformation in $^8$He
Authors:
M. Holl,
R. Kanungo,
Z. H. Sun,
G. Hagen,
J. A. Lay,
A. M. Moro,
P. Navrátil,
T. Papenbrock,
M. Alcorta,
D. Connolly,
B. Davids,
A. Diaz Varela,
M. Gennari,
G. Hackman,
J. Henderson,
S. Ishimoto,
A. I. Kilic,
R. Krücken,
A. Lennarz,
J. Liang,
J. Measures,
W. Mittig,
O. Paetkau,
A. Psaltis,
S. Quaglioni
, et al. (5 additional authors not shown)
Abstract:
A measurement of proton inelastic scattering of $^8$He at $8.25A$~MeV at TRIUMF shows a resonance at 3.54(6)~MeV with a width of 0.89(11)~MeV. The energy of the state is in good agreement with coupled cluster and no-core shell model with continuum calculations, with the latter successfully describing the measured resonance width as well. Its differential cross section analyzed with phenomenologica…
▽ More
A measurement of proton inelastic scattering of $^8$He at $8.25A$~MeV at TRIUMF shows a resonance at 3.54(6)~MeV with a width of 0.89(11)~MeV. The energy of the state is in good agreement with coupled cluster and no-core shell model with continuum calculations, with the latter successfully describing the measured resonance width as well. Its differential cross section analyzed with phenomenological collective excitation form factor and microscopic coupled reaction channels framework consistently reveals a large deformation parameter $β_2$ = 0.40(3), consistent with no-core shell model predictions of a large neutron deformation. This deformed double-closed shell at the neutron drip-line opens a new paradigm.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
The GRIFFIN Facility for Decay-Spectroscopy Studies at TRIUMF-ISAC
Authors:
A. B. Garnsworthy,
C. E. Svensson,
M. Bowry,
R. Dunlop,
A. D. MacLean,
B. Olaizola,
J. K. Smith,
F. A. Ali,
C. Andreoiu,
J. E. Ash,
W. H. Ashfield,
G. C. Ball,
T. Ballast,
C. Bartlett,
Z. Beadle,
P. C. Bender,
N. Bernier,
S. S. Bhattacharjee,
H. Bidaman,
V. Bildstein,
D. Bishop,
P. Boubel,
R. Braid,
D. Brennan,
T. Bruhn
, et al. (79 additional authors not shown)
Abstract:
Gamma-Ray Infrastructure For Fundamental Investigations of Nuclei, GRIFFIN, is a new high-efficiency $γ$-ray spectrometer designed for use in decay spectroscopy experiments with low-energy radioactive ion beams provided by TRIUMF's Isotope Separator and Accelerator (ISAC-I) facility. GRIFFIN is composed of sixteen Compton-suppressed large-volume clover-type high-purity germanium (HPGe) $γ$-ray det…
▽ More
Gamma-Ray Infrastructure For Fundamental Investigations of Nuclei, GRIFFIN, is a new high-efficiency $γ$-ray spectrometer designed for use in decay spectroscopy experiments with low-energy radioactive ion beams provided by TRIUMF's Isotope Separator and Accelerator (ISAC-I) facility. GRIFFIN is composed of sixteen Compton-suppressed large-volume clover-type high-purity germanium (HPGe) $γ$-ray detectors combined with a suite of ancillary detection systems and coupled to a custom digital data acquisition system. The infrastructure and detectors of the spectrometer as well as the performance characteristics and the analysis techniques applied to the experimental data are described.
△ Less
Submitted 6 December, 2018; v1 submitted 17 September, 2018;
originally announced September 2018.
-
Testing microscopically derived descriptions of nuclear collectivity: Coulomb excitation of 22Mg
Authors:
J. Henderson,
G. Hackman,
P. Ruotsalainen,
S. R. Stroberg,
K. D. Launey,
F. A. Ali,
N. Bernier,
M. A. Bentley,
M. Bowry,
R. Cabellero-Folch,
L. J. Evitts,
R. Frederick,
A. B. Garnsworthy,
P. E. Garrett,
J. D. Holt,
B. Jigmeddorj,
A. I. Kilic,
J. Measures,
D. Muecher,
B. Olaizola,
E. O'Sullivan,
O. Paetkau,
J. Park,
J. Smallcombe,
C. E. Svensson
, et al. (2 additional authors not shown)
Abstract:
Many-body nuclear theory utilizing microscopic or chiral potentials has developed to the point that collectivity might be dealt with in an {\it ab initio} framework without the use of effective charges; for example with the proper evolution of operators, or alternatively, through the use of an appropriate and manageable subset of particle-hole excitations. We present a precise determination of…
▽ More
Many-body nuclear theory utilizing microscopic or chiral potentials has developed to the point that collectivity might be dealt with in an {\it ab initio} framework without the use of effective charges; for example with the proper evolution of operators, or alternatively, through the use of an appropriate and manageable subset of particle-hole excitations. We present a precise determination of $E2$ strength in $^{22}$Mg and its mirror $^{22}$Ne by Coulomb excitation, allowing for rigorous comparisons with theory. No-core symplectic shell-model calculations were performed and agree with the new $B(E2)$ values while in-medium similarity-renormalization-group calculations consistently underpredict the absolute strength, with the missing strength found to have both isoscalar and isovector components.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Pulsed Beam Tests at the SANAEM RFQ Beamline
Authors:
G. Turemen,
Y. Akgun,
A. Alacakir,
I. Kilic,
B. Yasatekin,
E. Ergenlik,
S. Ogur,
E. Sunar,
V. Yildiz,
F. Ahiska,
E. Cicek,
G. Unel
Abstract:
A proton beamline consisting of an inductively coupled plasma (ICP) source, two solenoid magnets, two steerer magnets and a radio frequency quadrupole (RFQ) is developed at the Turkish Atomic Energy Authority's (TAEA) Saraykoy Nuclear Research and Training Center (SNRTC-SANAEM) in Ankara. In Q4 of 2016, the RFQ was installed in the beamline. The high power tests of the RF power supply and the RF t…
▽ More
A proton beamline consisting of an inductively coupled plasma (ICP) source, two solenoid magnets, two steerer magnets and a radio frequency quadrupole (RFQ) is developed at the Turkish Atomic Energy Authority's (TAEA) Saraykoy Nuclear Research and Training Center (SNRTC-SANAEM) in Ankara. In Q4 of 2016, the RFQ was installed in the beamline. The high power tests of the RF power supply and the RF transmission line were done successfully. The high power RF conditioning of the RFQ was performed recently. The 13.56 MHz ICP source was tested in two different conditions, CW and pulsed. The characterization of the proton beam was done with ACCTs, Faraday cups and a pepper-pot emittance meter. Beam transverse emittance was measured in between the two solenoids of the LEBT. The measured beam is then reconstructed at the entrance of the RFQ by using computer simulations to determine the optimum solenoid currents for acceptance matching of the beam. This paper will introduce the pulsed beam test results at the SANAEM RFQ beamline. In addition, the high power RF conditioning of the RFQ will be discussed.
△ Less
Submitted 21 June, 2017; v1 submitted 18 May, 2017;
originally announced May 2017.
-
Manufacturing and the LLRF Tests of the SANAEM RFQ
Authors:
G. Turemen,
A. Alacakir,
Y. Akgun,
S. Bolukdemir,
I. Kilic,
B. Yasatekin,
H. Yildiz,
G. Unel
Abstract:
The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the…
▽ More
The Turkish Atomic Energy Authority has been working on building an experimental proton beamline using local resources at the Saraykoy Nuclear Research and Training Center (SANAEM). The radio frequency quadrupole (RFQ) was manufactured after the completion of beam dynamics and 3D electromagnetic simulation studies. The vanes were machined using a three axis CNC machine. A CMM was used for both the acceptance tests of the vanes and their assembly. Production and assembly errors were found acceptable for this cavity, the very first one developed in Turkey. The aluminum vanes were copper coated by electroplating. The coated vanes were bolted and bonded with eight screws, eight pins and two different adhesives. A silver paste was used for RF sealing and a low vapor pressure epoxy was used for vacuum isolation. First LLRF tests of the RFQ were performed using the phase shift method with a bead-pull setup, a VNA, an N-type RF coupler and a pick-up loop. Cavity quality factor was measured with 3dB method for different RF sealing stages. This study summarizes the machining, assembling and the first LLRF tests of the SANAEM RFQ.
△ Less
Submitted 23 June, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Design and Manufacture of the RF Power Supply and RF Transmission Line for SANAEM Project Prometheus
Authors:
G. Turemen,
S. Ogur,
F. Ahiska,
B. Yasatekin,
E. Cicek,
A. Ozbey,
I. Kilic,
G. Unel,
A. Alacakir
Abstract:
A 1-5 MeV proton beamline is being built by the Turkish Atomic Energy Authority in collaboration with a number of graduate students from different universities. The primary goal of the project, is to acquire the design ability and manufacturing capability of all the components locally. SPP will be an accelerator and beam diagnostics test facility and it will also serve the detector development com…
▽ More
A 1-5 MeV proton beamline is being built by the Turkish Atomic Energy Authority in collaboration with a number of graduate students from different universities. The primary goal of the project, is to acquire the design ability and manufacturing capability of all the components locally. SPP will be an accelerator and beam diagnostics test facility and it will also serve the detector development community with its low beam current. This paper discusses the design and construction of the RF power supply and the RF transmission line components such as its waveguide converters and its circulator. Additionally low and high power RF test results are presented to compare the performances of the locally produced components to the commercially available ones.
△ Less
Submitted 13 July, 2017; v1 submitted 7 April, 2015;
originally announced April 2015.
