-
Ostwald ripening in an oxide-on-metal system
Authors:
Natalia Michalak,
Tomasz Ossowski,
Zygmunt Miłosz,
Mauricio J. Prieto,
Ying Wang,
Mirosław Werwiński,
Visnja Babacic,
Francesca Genuzio,
Luca Vattuone,
Adam Kiejna,
Thomas Schmidt,
Mikołaj Lewandowski
Abstract:
Ostwald ripening is a well-known physicochemical phenomenon in which smaller particles, characterized by high surface energy, dissolve and feed the bigger ones that are thermodynamically more stable. The effect is commonly observed in solid and liquid solutions, as well as in systems consisting of supported metal clusters or liquid droplets. Here, we provide the first evidence for the occurrence o…
▽ More
Ostwald ripening is a well-known physicochemical phenomenon in which smaller particles, characterized by high surface energy, dissolve and feed the bigger ones that are thermodynamically more stable. The effect is commonly observed in solid and liquid solutions, as well as in systems consisting of supported metal clusters or liquid droplets. Here, we provide the first evidence for the occurrence of Ostwald ripening in an oxide-on-metal system which, in our case, consists of ultrathin iron monoxide (FeO) islands grown on Ru(0001) single-crystal support. The results reveal that the thermally-driven sintering of islands allows altering their fine structural characteristics, including size, perimeter length, defect density and stoichiometry, which are crucial, e.g., from the point of view of heterogeneous catalysis.
△ Less
Submitted 19 January, 2022; v1 submitted 3 May, 2021;
originally announced May 2021.
-
Moiré-free ultrathin iron oxide film: FeO(111) on Ag(111)
Authors:
M. Lewandowski,
T. Pabisiak,
N. Michalak,
Z. Miłosz,
V. Babačić,
Y. Wang,
M. Hermanowicz,
K. Palotás,
S. Jurga,
A. Kiejna,
R. Wiesendanger
Abstract:
Ultrathin iron oxide films epitaxially grown on the (111)- and (0001)-oriented metal single crystal supports exhibit unique electronic, catalytic and magnetic properties not observed for the corresponding bulk oxides. These properties originate mainly from the presence of Moiré superstructures which, in turn, disqualify ultrathin films as model systems imitating bulk materials. We present a route…
▽ More
Ultrathin iron oxide films epitaxially grown on the (111)- and (0001)-oriented metal single crystal supports exhibit unique electronic, catalytic and magnetic properties not observed for the corresponding bulk oxides. These properties originate mainly from the presence of Moiré superstructures which, in turn, disqualify ultrathin films as model systems imitating bulk materials. We present a route for the preparation of a close-packed Moiré-free ultrathin iron oxide film, namely FeO(111) on Ag(111). Experimental scanning tunneling microscopy (STM), low energy electron diffraction (LEED) and x-ray photoelectron spectroscopy (XPS) results confirm perfect structural order in the film. Density functional theory (DFT)-based calculations suggest full relaxation of the oxide layer that adopts the atomic lattice of the crystalline support and exhibits properties similar to those of a free-standing FeO. The results open new pathways for model-type studies of electronic, catalytic and magnetic properties of fully-relaxed iron oxide films and related systems.
△ Less
Submitted 17 January, 2018; v1 submitted 3 August, 2016;
originally announced August 2016.
-
First principles study of the adsorption of MgO molecules on a clean Fe(001) surface
Authors:
D. Wiśnios,
A. Kiejna,
J. Korecki
Abstract:
The adsorption of MgO molecules on a Fe(001) surface was studied using density functional theory (DFT) and projector augmented wave methods. The energetically most favored configurations for different adsorption sites considered were identified. The most preferable adsorption geometry is when the MgO molecules are parallel to the surface, with Mg in the interstitial site and O in on-top of the Fe…
▽ More
The adsorption of MgO molecules on a Fe(001) surface was studied using density functional theory (DFT) and projector augmented wave methods. The energetically most favored configurations for different adsorption sites considered were identified. The most preferable adsorption geometry is when the MgO molecules are parallel to the surface, with Mg in the interstitial site and O in on-top of the Fe atom. During the adsorption of subsequent MgO molecules in this geometry, a sharp, non-oxidized interface is formed between the MgO adlayer and Fe(001) surface. The adsorption of MgO perpendicular to the surface, with oxygen incorporated in the topmost Fe layer is less probable, but may lead to the formation of the FeO layer when stabilized with an excess of oxygen atoms. Structural, electronic and magnetic properties of both interface types were examined for the MgO coverage from 1/9 to 1 monolayer (ML). Electronic and magnetic properties are sensitive to the MgO coverage. For lower coverage of MgO, clear hybridization between the Fe 3d and O 2p states is shown. The average magnetic moment of the surface Fe atoms is reduced with coverage, achieving 2.78 $μ_{\rm B}$ for 1 ML of MgO.
△ Less
Submitted 9 December, 2015; v1 submitted 21 July, 2015;
originally announced July 2015.
-
Surface properties of the clean and Au/Pd covered Fe$_3$O$_4$(111): a DFT and DFT+$U$ study
Authors:
Adam Kiejna,
Tomasz Ossowski,
Tomasz Pabisiak
Abstract:
The spin-density functional theory (DFT) and DFT+$U$ with Hubbard $U$ term accounting for on-site Coulomb interactions were applied to investigate structure, stability, and electronic properties of different terminations of the Fe$_3$O$_4$(111) surface. All terminations of the ferrimagnetic Fe$_3$O$_4$(111) surface exhibit very large (up to 90%) relaxations of the first four interlayer distances,…
▽ More
The spin-density functional theory (DFT) and DFT+$U$ with Hubbard $U$ term accounting for on-site Coulomb interactions were applied to investigate structure, stability, and electronic properties of different terminations of the Fe$_3$O$_4$(111) surface. All terminations of the ferrimagnetic Fe$_3$O$_4$(111) surface exhibit very large (up to 90%) relaxations of the first four interlayer distances, decreasing with the oxide layer depth. Our calculations predict the iron terminated surface to be most stable in a wide range of the accessible values of the oxygen chemical potential. The adsorption of Au and Pd on two stable Fe- and O-terminated surfaces is studied. Our results show that Pd binds stronger than Au both to the Fe- and O-terminated surface. DFT+$U$ gives stronger bonding than DFT. The bonding of both adsorbates to the O-terminated magnetite surface is by 1.5-2.5 eV stronger than to the Fe-terminated surface.
△ Less
Submitted 26 December, 2011;
originally announced December 2011.
-
Cohesive and magnetic properties of grain boundaries in bcc Fe with Cr additions
Authors:
E. Wachowicz,
T. Ossowski,
A. Kiejna
Abstract:
Structural, cohesive, and magnetic properties of two symmetric $\Sigma3(111)$ and $\Sigma5(210)$ tilt grain boundaries (GBs) in pure bcc Fe and in dilute FeCr alloys are studied from first principles. Different concentration and position of Cr solute atoms are considered. We found that Cr atoms placed in the GB interstice enhance the cohesion by 0.5-1.2 J/m$^2$. Substitutional Cr in the layers a…
▽ More
Structural, cohesive, and magnetic properties of two symmetric $\Sigma3(111)$ and $\Sigma5(210)$ tilt grain boundaries (GBs) in pure bcc Fe and in dilute FeCr alloys are studied from first principles. Different concentration and position of Cr solute atoms are considered. We found that Cr atoms placed in the GB interstice enhance the cohesion by 0.5-1.2 J/m$^2$. Substitutional Cr in the layers adjacent to the boundary shows anisotropic effect on the GB cohesion: it is neutral when placed in the (111) oriented Fe grains, and enhances cohesion (by 0.5 J/m$^2$) when substituted in the boundary layer of the (210) grains. The strengthening effect of the Cr solute is dominated by the chemical component of the adhesive binding energy. Our calculations show that unlike the free iron surfaces, Cr impurities segregate to the boundaries of the Fe grains. The magnetic moments on GB atoms are substantially changed and their variation correlates with the corresponding relaxation pattern of the GB planes. The moments on Cr additions are 2-4 times enhanced in comparison with that in a Cr crystal and are antiparallel to the moments on the Fe atoms.
△ Less
Submitted 19 September, 2009; v1 submitted 9 March, 2009;
originally announced March 2009.
-
Comparison of the full-potential and frozen-core approximation approaches to density-functional calculations of surfaces
Authors:
Adam Kiejna,
Georg Kresse,
Jutta Rogal,
Abir De Sarkar,
Karsten Reuter,
Matthias Scheffler
Abstract:
We scrutinize the accuracy of the pseudopotential approximation in density-functional theory (DFT) calculations of surfaces by systematically comparing to results obtained within a full-potential setup. As model system we choose the CO oxidation at a RuO2(110) surface and focus in particular on the adsorbate binding energies and reaction barriers as target quantities for the comparison. Rather s…
▽ More
We scrutinize the accuracy of the pseudopotential approximation in density-functional theory (DFT) calculations of surfaces by systematically comparing to results obtained within a full-potential setup. As model system we choose the CO oxidation at a RuO2(110) surface and focus in particular on the adsorbate binding energies and reaction barriers as target quantities for the comparison. Rather surprisingly, the major reason for discrepancy does not result from the neglected semi-core state relaxation in the frozen-core approximation, but from an inadequate description of the local part of the Ru pseudopotential, responsible for the scattering of f like waves. Tiny, seemingly irrelevant, imprecisions appearing in these properties can have a noticeable influence on the surface energetics. At least for the present example, we obtain excellent agreement between both approaches, if the pseudopotential describes these scattering properties accurately.
△ Less
Submitted 1 September, 2005;
originally announced September 2005.
-
Density-functional study of oxygen adsorption on Mo(112)
Authors:
Adam Kiejna,
R. M. Nieminen
Abstract:
Atomic oxygen adsorption on the Mo(112) surface has been investigated by means of first-principles total energy calculations. Among the variety of possible adsorption sites it was found that the bridge sites between two Mo atoms of the topmost row are favored for O adsorption at low and medium coverages. At about one monolayer coverage oxygen atoms prefer to adsorb in a quasi-threefold hollow si…
▽ More
Atomic oxygen adsorption on the Mo(112) surface has been investigated by means of first-principles total energy calculations. Among the variety of possible adsorption sites it was found that the bridge sites between two Mo atoms of the topmost row are favored for O adsorption at low and medium coverages. At about one monolayer coverage oxygen atoms prefer to adsorb in a quasi-threefold hollow sites coordinated by two first-layer Mo atoms and one second layer atom. The stability of a structural model for an oxygen-induced $p(2\times 3)$ reconstruction of the missing-row type is examined.
△ Less
Submitted 15 November, 2004;
originally announced November 2004.
-
Simple Model for Energy and Force Characteristics of Metallic Nanocontacts
Authors:
V. V. Pogosov,
V. P. Kurbatsky,
D. P. Kotlyarov,
A. Kiejna
Abstract:
The quantum size oscillations of the energetic properties and the elongation force of the gold slabs and wires, isolated and in a contact with electrodes, are calculated in a free-electron model. A simple relation between the Fermi energy and the square-potential-well depth is used and tested for low-dimensional systems. It is shown that considering the electron subsystem of a slab (or wire) in…
▽ More
The quantum size oscillations of the energetic properties and the elongation force of the gold slabs and wires, isolated and in a contact with electrodes, are calculated in a free-electron model. A simple relation between the Fermi energy and the square-potential-well depth is used and tested for low-dimensional systems. It is shown that considering the electron subsystem of a slab (or wire) in a contact as open one, the contact acts like a sort of electron pump which sucks or pumps out electrons from the sample. The effect of the contact potential difference on the elastic force oscillations is considered. The calculated amplitudes of force oscillations are in a qualitative agreement with those observed experimentally.
△ Less
Submitted 8 October, 2003;
originally announced October 2003.
-
O adsorption and incipient oxidation of the Mg(0001) surface
Authors:
Elsebeth Schroder,
Roman Fasel,
Adam Kiejna
Abstract:
First principles density functional calculations are used to study the early oxidation stages of the Mg(0001) surface for oxygen coverages 1/16 <= Theta <= 3 monolayers. It is found that at very low coverages O is incorporated below the topmost Mg layer in tetrahedral sites. At higher oxygen-load the binding in on-surface sites is increased but at one monolayer coverage the on-surface binding is…
▽ More
First principles density functional calculations are used to study the early oxidation stages of the Mg(0001) surface for oxygen coverages 1/16 <= Theta <= 3 monolayers. It is found that at very low coverages O is incorporated below the topmost Mg layer in tetrahedral sites. At higher oxygen-load the binding in on-surface sites is increased but at one monolayer coverage the on-surface binding is still about 60 meV weaker than for subsurface sites. The subsurface octahedral sites are found to be unfavorable compared to subsurface tetrahedral sites and to on-surface sites. At higher coverages oxygen adsorbs both under the surface and up. Our calculations predict island formation and clustering of incorporated and adsorbed oxygen in agreement with previous calculations. The calculated configurations are compared with the angle-scanned x-ray photoelectron diffraction experiment to determine the geometrical structure of the oxidized Mg(0001) surface.
△ Less
Submitted 2 July, 2003;
originally announced July 2003.