-
Quantifying the magnetic interactions governing chiral spin textures using deep neural networks
Authors:
Jian Feng Kong,
Yuhua Ren,
M. S. Nicholas Tey,
Pin Ho,
Khoong Hong Khoo,
Xiaoye Chen,
Anjan Soumyanarayanan
Abstract:
The interplay of magnetic interactions in chiral multilayer films gives rise to nanoscale topological spin textures, which form attractive elements for next-generation computing. Quantifying these interactions requires several specialized, time-consuming, and resource-intensive experimental techniques. Imaging of ambient domain configurations presents a promising avenue for high-throughput extract…
▽ More
The interplay of magnetic interactions in chiral multilayer films gives rise to nanoscale topological spin textures, which form attractive elements for next-generation computing. Quantifying these interactions requires several specialized, time-consuming, and resource-intensive experimental techniques. Imaging of ambient domain configurations presents a promising avenue for high-throughput extraction of the parent magnetic interactions. Here we present a machine learning-based approach to determine the key interactions -- symmetric exchange, chiral exchange, and anisotropy -- governing chiral domain phenomenology in multilayers. Our convolutional neural network model, trained and validated on over 10,000 domain images, achieved $R^2 > 0.85$ in predicting the parameters and independently learned physical interdependencies between them. When applied to microscopy data acquired across samples, our model-predicted parameter trends are consistent with independent experimental measurements. These results establish ML-driven techniques as valuable, high-throughput complements to conventional determination of magnetic interactions, and serve to accelerate materials and device development for nanoscale electronics.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
Oxygen Octahedral Tilt Controlled Topological Hall Effect in Epitaxial and Freestanding SrRuO3/SrIrO3 Heterostructures
Authors:
Zhi Shiuh Lim,
Amy Khoong Hong Khoo,
Zhou Zhou,
Ganesh Ji Omar,
** Yang,
Robert Laskowski,
Ariando Ariando
Abstract:
The fabrication technique of freestanding oxide flakes by epitaxial lift-off has made significant contributions to the multifunctional oxide thin film research. Several highly impactful work have recently demonstrated the robustness of freestanding oxide flakes retaining their desirable properties after detachment from the substrate by dissolving away the water-soluble Sr3Al2O6 buffer layer. First…
▽ More
The fabrication technique of freestanding oxide flakes by epitaxial lift-off has made significant contributions to the multifunctional oxide thin film research. Several highly impactful work have recently demonstrated the robustness of freestanding oxide flakes retaining their desirable properties after detachment from the substrate by dissolving away the water-soluble Sr3Al2O6 buffer layer. Firstly, in epitaxial SrRuO3/SrIrO3 systems showing Hall-humps reminiescence of Topological Hall Effect, first-principle calculations revealed that octahedral tilts can modify the sign of Dzyaloshinskii-Moriya interaction and avoid cancellation in a symmetric trilayer structure. Secondly, freestanding flakes of the trilayer is also able to retain the Hall-humps across a wide temperature range. The behaviour of humps' peak field does not vary with field direction rotation away from surface normal, consistent to a micromagnetic simulation result of Néel-type magnetic Skyrmions. The layer-resolved octahedral tilts in the freestanding heterostructures also crucially controls the occurrence of Hall-humps, consistent to the insight from the epitaxial ones. This work offers a new perspective to understanding Hall-humps in perovskite oxides, as well as demonstrates the fabrication of oxide heterostructure membranes with high interfacial quality.
△ Less
Submitted 17 May, 2023; v1 submitted 13 April, 2022;
originally announced April 2022.
-
Widely Tunable Berry curvature in the Magnetic Semimetal Cr1+dTe2
Authors:
Y. Fujisawa,
M. Pardo-Almanza,
C. H. Hsu,
A. Mohamed,
K. Yamagami,
A. Krishnadas,
F. C. Chuang,
K. H. Khoo,
J. Zang,
A. Soumyanarayanan,
Y. Okada
Abstract:
Magnetic semimetals have increasingly emerged as lucrative platforms hosting spin-based topological phenomena in real and momentum spaces. Of particular interest is the emergence of Berry curvature, whose geometric origin, accessibility from Hall transport experiments, and material tunability, bodes well for new physics and practical devices. Cr1+dTe2, a self-intercalated magnetic transition metal…
▽ More
Magnetic semimetals have increasingly emerged as lucrative platforms hosting spin-based topological phenomena in real and momentum spaces. Of particular interest is the emergence of Berry curvature, whose geometric origin, accessibility from Hall transport experiments, and material tunability, bodes well for new physics and practical devices. Cr1+dTe2, a self-intercalated magnetic transition metal dichalcogenide, TMD, exhibits attractive natural attributes relevant to such applications, including topological magnetism, tunable electron filling, magnetic frustration etc. While recent studies have explored real-space Berry curvature effects in this material, similar considerations of momentum-space Berry curvature are lacking. Here, we systematically investigate the electronic structure and transport properties of epitaxial Cr1+dTe2 thin films over a wide range of do**, d between 0.33 and 0.71. Spectroscopic experiments reveal the presence of a characteristic semi-metallic band region near the Brillouin Zone edge, which shows a rigid band like energy shift as a function of d. Transport experiments show that the intrinsic component of the anomalous Hall effect, AHE, is sizable, and undergoes a sign flip across d. Finally, density functional theory calculations establish a causal link between the observed do** evolution of the band structure and AHE: the AHE sign flip is shown to emerge from the sign change of the Berry curvature, as the semi-metallic band region crosses the Fermi energy. Our findings underscore the increasing relevance of momentum-space Berry curvature in magnetic TMDs and provide a unique platform for intertwining topological physics in real and momentum spaces.
△ Less
Submitted 4 July, 2022; v1 submitted 5 April, 2022;
originally announced April 2022.
-
Unveiling the emergent traits of chiral spin textures in magnetic multilayers
Authors:
Xiaoye Chen,
Ming Lin,
Jian Feng Kong,
Hui Ru Tan,
Anthony K. C. Tan,
Soong-Geun Je,
Hang Khume Tan,
Khoong Hong Khoo,
Mi-Young Im,
Anjan Soumyanarayanan
Abstract:
Magnetic skyrmions are topologically wound nanoscale textures of spins whose ambient stability and electrical manipulation in multilayer films have led to an explosion of research activities. While past efforts focused predominantly on isolated skyrmions, recently ensembles of chiral spin textures, consisting of skyrmions and magnetic stripes, were shown to possess rich interactions with potential…
▽ More
Magnetic skyrmions are topologically wound nanoscale textures of spins whose ambient stability and electrical manipulation in multilayer films have led to an explosion of research activities. While past efforts focused predominantly on isolated skyrmions, recently ensembles of chiral spin textures, consisting of skyrmions and magnetic stripes, were shown to possess rich interactions with potential for device applications. However, several fundamental aspects of chiral spin texture phenomenology remain to be elucidated, including their domain wall structure, thermodynamic stability, and morphological transitions. Here we unveil the evolution of these textural characteristics on a tunable multilayer platform - wherein chiral interactions governing spin texture energetics can be widely varied - using a combination of full-field electron and soft X-ray microscopies with numerical simulations. With increasing chiral interactions, we demonstrate the emergence of Néel helicity, followed by a marked reduction in domain compressibility, and finally a transformation in the skyrmion formation mechanism. Together with an analytical model, these experiments establish a comprehensive microscopic framework for investigating and tailoring chiral spin texture character in multilayer films.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Quantifying symmetric exchange in ultrathin ferromagnetic films with chirality
Authors:
Tobias Böttcher,
T. S. Suraj,
Xiaoye Chen,
Banibrato Sinha,
Hui Ru Tan,
Hang Khume Tan,
Burkard Hillebrands,
Mikhail Kostylev,
Robert Laskowski,
Khoong Hong Khoo,
Anjan Soumyanarayanan,
Philipp Pirro
Abstract:
The symmetric (Heisenberg) exchange interaction is fundamental to magnetism and assumes critical importance in designing magnetic materials for novel emergent phenomena and device applications. However, quantifying exchange is extremely challenging for ultrathin ($\sim$ 1 nm) magnetic films, as techniques and approximations reliably used for bulk materials are largely inapplicable in the two-dimen…
▽ More
The symmetric (Heisenberg) exchange interaction is fundamental to magnetism and assumes critical importance in designing magnetic materials for novel emergent phenomena and device applications. However, quantifying exchange is extremely challenging for ultrathin ($\sim$ 1 nm) magnetic films, as techniques and approximations reliably used for bulk materials are largely inapplicable in the two-dimensional (2D) limit. Here we present and contrast the measurement of exchange stiffness, $A$, by several methods on a series of five Co/Pt-based ultrathin ($1-2$ nm) films. We compare results from (a) spin-wave spectroscopy by Brillouin light scattering (BLS), (b) three analytical models describing the temperature dependence of magnetization obtained by magnetometry, (c) microscopic domain periodicity measurements and simulations, and (d) ab initio density functional theory (DFT) calculations. While different methods present some qualitatively consistent trends across samples, we note, for any given sample, considerable differences (up to $5\times$) in the absolute values of $A$ across the techniques, consistent with discrepancies of $A$ reported in literature for nominally similar samples. We analyze possible sources of the discrepancies across various methods, notably including their relationship to the spin-wave dispersion, and the wave-vector ranges probed. We compare the strengths and limitations of the techniques, and outline directions for their future use in characterizing exchange interactions in ultrathin films.
△ Less
Submitted 26 January, 2023; v1 submitted 8 September, 2021;
originally announced September 2021.
-
Angular dependence of hump-shape Hall Effects for distinguishing between Karplus-Luttinger and Geometrical Origins
Authors:
Z. S. Lim,
L. E. Chow,
K. H. Khoo,
G. J. Omar,
Z. Zhang,
Z. Luo,
H. Yan,
P. Yang,
R. Laskowski,
A. Ariando
Abstract:
Among various magnetic thin film heterostructures in solid state Physics, two contrasting mechanisms of the hump-shaped Hall Effects remain ambiguous and debated, namely the overlap of two opposite-signed Karplus-Luttinger Hall-loops associated with inhomogeneous collinear magnetic bubbles with perpendicular anisotropy, or the Geometrical/Topological Hall Effect associated with magnetic skyrmions.…
▽ More
Among various magnetic thin film heterostructures in solid state Physics, two contrasting mechanisms of the hump-shaped Hall Effects remain ambiguous and debated, namely the overlap of two opposite-signed Karplus-Luttinger Hall-loops associated with inhomogeneous collinear magnetic bubbles with perpendicular anisotropy, or the Geometrical/Topological Hall Effect associated with magnetic skyrmions. Their similarity in topology imposes difficulty in discrimination via magnetic imaging. Here, this ambiguity is overcome by the divergence exponent of angle-dependent hump peak fields via magnetic field rotation characterization on several heterostructures. Their difference in sensitivity to in-plane fields reveals that the former mechanism involves higher uniaxial anisotropy than the latter, departing from the pure skyrmion regime described by Ginzburg-Landau framework of triple-q spin-wave superposition. Various materials can be collapsed into a single curve of divergence exponent versus domain wall energy, bridging the crossover of the two aforementioned mechanisms.
△ Less
Submitted 7 February, 2024; v1 submitted 6 August, 2021;
originally announced August 2021.
-
Tuning Dzyaloshinskii-Moriya Interaction in Ferrimagnetic GdCo: A First Principles Approach
Authors:
Md Golam Morshed,
Khoong Hong Khoo,
Yassine Quessab,
Jun-Wen Xu,
Robert Laskowski,
Prasanna V. Balachandran,
Andrew D. Kent,
Avik W. Ghosh
Abstract:
We present a systematic analysis of our ability to tune chiral Dzyaloshinskii-Moriya Interactions (DMI) in compensated ferrimagnetic Pt/GdCo/Pt1-xWx trilayers by cap layer composition. Using first principles calculations, we show that the DMI increases rapidly for only ~ 10% W and saturates thereafter, in agreement with experiments. The calculated DMI shows a spread in values around the experiment…
▽ More
We present a systematic analysis of our ability to tune chiral Dzyaloshinskii-Moriya Interactions (DMI) in compensated ferrimagnetic Pt/GdCo/Pt1-xWx trilayers by cap layer composition. Using first principles calculations, we show that the DMI increases rapidly for only ~ 10% W and saturates thereafter, in agreement with experiments. The calculated DMI shows a spread in values around the experimental mean, depending on the atomic configuration of the cap layer interface. The saturation is attributed to the vanishing of spin orbit coupling energy at the cap layer and the simultaneous constancy at the bottom interface. Additionally, we predict the DMI in Pt/GdCo/X (X=Ta, W, Ir) and find that W in the cap layer favors a higher DMI than Ta and Ir that can be attributed to the difference in d-band alignment around the Fermi level. Our results open up exciting combinatorial possibilities for controlling the DMI in ferrimagnets towards nucleating and manipulating ultrasmall high-speed skyrmions.
△ Less
Submitted 9 January, 2021;
originally announced January 2021.
-
Tailoring Magnetism in Self-intercalated Cr1+δTe2 Epitaxial Films
Authors:
Y. Fujisawa,
M. Pardo-Almanza,
J. Garland,
K. Yamagami,
X. Zhu,
X. Chen,
K. Araki,
T. Takeda,
M. Kobayashi,
Y. Takeda,
C. H. Hsu,
F. C. Chuang,
R. Laskowski,
K. H. Khoo,
A. Soumyanarayanan,
Y. Okada
Abstract:
Magnetic transition metal dichalcogenide (TMD) films have recently emerged as promising candidates to host novel magnetic phases relevant to next-generation spintronic devices. However, systematic control of the magnetization orientation, or anisotropy, and its thermal stability, characterized by Curie temperature (Tc) remains to be achieved in such films. Here we present self-intercalated epitaxi…
▽ More
Magnetic transition metal dichalcogenide (TMD) films have recently emerged as promising candidates to host novel magnetic phases relevant to next-generation spintronic devices. However, systematic control of the magnetization orientation, or anisotropy, and its thermal stability, characterized by Curie temperature (Tc) remains to be achieved in such films. Here we present self-intercalated epitaxial Cr1+δTe2 films as a platform for achieving systematic/smooth magnetic tailoring in TMD films. Using a molecular beam epitaxy (MBE) based technique, we have realized epitaxial Cr1+δTe2 films with smoothly tunable over a wide range (0.33-0.82), while maintaining NiAs-type crystal structure. With increasing δ, we found monotonic enhancement of Tc from 160 to 350 K, and the rotation of magnetic anisotropy from out-of-plane to in-plane easy axis configuration for fixed film thickness. Contributions from conventional dipolar and orbital moment terms are insufficient to explain the observed evolution of magnetic behavior with δ. Instead, ab initio calculations suggest that the emergence of antiferromagnetic interactions with δ, and its interplay with conventional ferromagnetism, may play a key role in the observed trends. To our knowledge, this constitutes the first demonstration of tunable Tc and magnetic anisotropy across room temperature in TMD films, and paves the way for engineering novel magnetic phases for spintronic applications.
△ Less
Submitted 1 August, 2020;
originally announced August 2020.
-
van der Waals Bonded Co/h-BN Contacts to Ultrathin Black Phosphorus Devices
Authors:
Ahmet Avsar,
Jun Y. Tan,
Luo Xin,
Khoong Hong Khoo,
Yuting Yeo,
Kenji Watanabe,
Takashi Taniguchi,
Su Ying Quek,
Barbaros Ozyilmaz
Abstract:
Due to the chemical inertness of 2D hexagonal-Boron Nitride (h-BN), few atomic-layer h-BN is often used to encapsulate air-sensitive 2D crystals such as Black Phosphorus (BP). However, the effects of h-BN on Schottky barrier height, do** and contact resistance are not well known. Here, we investigate these effects by fabricating h-BN encapsulated BP transistors with cobalt (Co) contacts. In shar…
▽ More
Due to the chemical inertness of 2D hexagonal-Boron Nitride (h-BN), few atomic-layer h-BN is often used to encapsulate air-sensitive 2D crystals such as Black Phosphorus (BP). However, the effects of h-BN on Schottky barrier height, do** and contact resistance are not well known. Here, we investigate these effects by fabricating h-BN encapsulated BP transistors with cobalt (Co) contacts. In sharp contrast to directly Co contacted p-type BP devices, we observe strong n-type conduction upon insertion of the h-BN at the Co/BP interface. First principles calculations show that this difference arises from the much larger interface dipole at the Co/h-BN interface compared to the Co/BP interface, which reduces the work function of the Co/h-BN contact. The Co/h-BN contacts exhibit low contact resistances (~ 4.5 k-ohm), and are Schottky barrier free. This allows us to probe high electron mobilities (4,200 cm2/Vs) and observe insulator-metal transitions even under two-terminal measurement geometry.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Origin of Contact Resistance at Ferromagnetic Metal-Graphene Interfaces
Authors:
Khoong Hong Khoo,
Wei Sun Leong,
John T. L. Thong,
Su Ying Quek
Abstract:
Edge contact geometries are thought to yield ultralow contact resistances in most non-ferromagnetic metal-graphene interfaces owing to their large metal-graphene coupling strengths. Here, we examine the contact resistance of edge- versus surface-contacted ferromagnetic metal-graphene interfaces (i.e. nickel- and cobalt-graphene interfaces) using both single-layer and few-layer graphene. Good quali…
▽ More
Edge contact geometries are thought to yield ultralow contact resistances in most non-ferromagnetic metal-graphene interfaces owing to their large metal-graphene coupling strengths. Here, we examine the contact resistance of edge- versus surface-contacted ferromagnetic metal-graphene interfaces (i.e. nickel- and cobalt-graphene interfaces) using both single-layer and few-layer graphene. Good qualitative agreement is obtained between theory and experiment. In particular, in both theory and experiment, we observe that the contact resistance of edge-contacted ferromagnetic metal-graphene interfaces is much lower than that of surface-contacted ones, for all devices studied and especially for the single-layer graphene systems. We show that this difference in resistance is not due to differences in the metal-graphene coupling strength, which we quantify using Hamiltonian matrix elements. Instead, the larger contact resistance in surface contacts results from spin filtering at the interface, in contrast to the edge-contacted case where both spins are transmitted. Temperature-dependent resistance measurements beyond the Curie temperature TC show that the spin degree of freedom is indeed important for the experimentally measured contact resistance. These results show that it is possible to induce a large change in contact resistance by changing the temperature in the vicinity of TC, thus paving the way for temperature-controlled switches based on spin.
△ Less
Submitted 29 June, 2017;
originally announced June 2017.
-
Tunable Room Temperature Magnetic Skyrmions in Ir/Fe/Co/Pt Multilayers
Authors:
Anjan Soumyanarayanan,
M. Raju,
A. L. Gonzalez Oyarce,
Anthony K. C. Tan,
Mi-Young Im,
A. P. Petrovic,
Pin Ho,
K. H. Khoo,
M. Tran,
C. K. Gan,
F. Ernult,
C. Panagopoulos
Abstract:
Magnetic skyrmions are nanoscale topological spin structures offering great promise for next-generation information storage technologies. The recent discovery of sub-100 nm room temperature (RT) skyrmions in several multilayer films has triggered vigorous efforts to modulate their physical properties for their use in devices. Here we present a tunable RT skyrmion platform based on multilayer stack…
▽ More
Magnetic skyrmions are nanoscale topological spin structures offering great promise for next-generation information storage technologies. The recent discovery of sub-100 nm room temperature (RT) skyrmions in several multilayer films has triggered vigorous efforts to modulate their physical properties for their use in devices. Here we present a tunable RT skyrmion platform based on multilayer stacks of Ir/Fe/Co/Pt, which we study using X-ray microscopy, magnetic force microscopy and Hall transport techniques. By varying the ferromagnetic layer composition, we can tailor the magnetic interactions governing skyrmion properties, thereby tuning their thermodynamic stability parameter by an order of magnitude. The skyrmions exhibit a smooth crossover between isolated (metastable) and disordered lattice configurations across samples, while their size and density can be tuned by factors of 2 and 10 respectively. We thus establish a platform for investigating functional sub-50 nm RT skyrmions, pointing towards the development of skyrmion-based memory devices.
△ Less
Submitted 17 July, 2017; v1 submitted 20 June, 2016;
originally announced June 2016.
-
Low Resistance Metal Contacts to MoS2 Devices with Nickel-Etched-Graphene Electrodes
Authors:
Wei Sun Leong,
Xin Luo,
Yida Li,
Khoong Hong Khoo,
Su Ying Quek,
John T. L. Thong
Abstract:
We report an approach to achieve low-resistance contacts to MoS2 transistors with the intrinsic performance of the MoS2 channel preserved. Through a dry transfer technique and a metal-catalyzed graphene treatment process, nickel-etched-graphene electrodes were fabricated on MoS2 that yield contact resistance as low as 200 ohm-um. The substantial contact enhancement (~2 orders of magnitude) as comp…
▽ More
We report an approach to achieve low-resistance contacts to MoS2 transistors with the intrinsic performance of the MoS2 channel preserved. Through a dry transfer technique and a metal-catalyzed graphene treatment process, nickel-etched-graphene electrodes were fabricated on MoS2 that yield contact resistance as low as 200 ohm-um. The substantial contact enhancement (~2 orders of magnitude) as compared to pure nickel electrodes, is attributed to the much smaller work function of nickel-graphene electrodes, together with the fact that presence of zigzag edges in the treated graphene surface enhances tunneling between nickel and graphene. To this end, the successful fabrication of a clean graphene-MoS2 interface and a low resistance nickel-graphene interface is critical for the experimentally measured low contact resistance. The potential of using graphene as an electrode interlayer demonstrated in this work paves the way towards achieving high performance next-generation transistors.
△ Less
Submitted 29 December, 2014; v1 submitted 6 October, 2014;
originally announced October 2014.
-
Novel Orientational Ordering and Reentrant Metallicity in KxC60 Monolayers for 3 <= x <= 5
Authors:
Yayu Wang,
R. Yamachika,
A. Wachowiak,
M. Grobis,
K. H. Khoo,
D. H. Lee,
Steven G. Louie,
M. F. Crommie
Abstract:
We have performed local STM studies on potassium-doped C60 (KxC60) monolayers over a wide regime of the phase diagram. As K content increases from x = 3 to 5, KxC60 monolayers undergo metal-insulator-metal reentrant phase transitions and exhibit a variety of novel orientational orderings. The most striking new structure has a pinwheel-like 7-molecule unit cell in insulating K4+dC60. We propose t…
▽ More
We have performed local STM studies on potassium-doped C60 (KxC60) monolayers over a wide regime of the phase diagram. As K content increases from x = 3 to 5, KxC60 monolayers undergo metal-insulator-metal reentrant phase transitions and exhibit a variety of novel orientational orderings. The most striking new structure has a pinwheel-like 7-molecule unit cell in insulating K4+dC60. We propose that the driving mechanism for the orientational ordering in KxC60 is the lowering of electron kinetic energy through maximization of the overlap of neighboring molecular orbitals over the entire do** range x = 3 to 5. In the insulating and metallic phases this gives rise to orbital versions of the superexchange and double-exchange interactions respectively.
△ Less
Submitted 3 December, 2007;
originally announced December 2007.