-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Laser ablation in liquid: bridge from a plasma stage to bubble formation
Authors:
N. A. Inogamov,
V. A. Khokhlov,
Yu. V. Petrov,
V. V. Zhakhovsky
Abstract:
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a t…
▽ More
Laser ablation through liquid is an important process that have to be studied for applications which use laser ablation in liquid (LAL) and laser shock peening (LSP). LAL is employed for production of suspensions of nanoparticles, while LSP is applied to increase hardness and fatique/corrosion resistance properties of a surface layer. A bubble appears in liquid around the laser spot focused at a target surface after strong enough laser pulse. In the paper we connect the early quasi-plane heated layer created by a pulse in liquid and the bubble forming at much later stages. In the previous works these early stage from one side and the late stage from another side existed mainly as independent entities. At least, quantitative links between them were unknown. We consider how the quasi-plane heated layer of liquid forms thank to thermal conduction, how gradually conduction becomes weaker, and how the heated layer of liquid nearly adiabatically expands to few orders of magnitude in volume during the drop of pressure. Our molecular dynamics simulations show that the heated layer is filled by the diffusive atomic metal-liquid mixture. Metal atoms began to condense into nanoparticles (NP) when they meet cold liquid outside the edge of a mixing zone. This process limits diffusive expansion of metal atoms, because diffusive ability of NP is less than this ability for individual atoms. Thus the mixture expands together with hot liquid, and the NPs approximately homogeneously fill an interior of a bubble.
△ Less
Submitted 20 October, 2019;
originally announced October 2019.
-
Liquid tin droplet fragmentation by ultra-short laser pulse
Authors:
S. Yu. Grigoryev,
S. A. Dyachkov,
V. A. Khokhlov,
V. V. Zhakhovsky,
A. N. Parshikov,
N. A. Inogamov
Abstract:
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse ind…
▽ More
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse induced by an instantaneous temperature growth in the skin layer propagates from the one side of the surface of a spherical droplet and focuses in its center; at the release a big cavity is formed at the center of a droplet; the pressure wave release at the backside surface may cause the spallation.
△ Less
Submitted 15 February, 2019; v1 submitted 15 December, 2018;
originally announced January 2019.
-
Condensation of laser produced gold plasma during expansion and cooling in water environment
Authors:
Yu. V. Petrov,
N. A. Inogamov,
V. V. Zhakhovsky,
V. A. Khokhlov
Abstract:
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated h…
▽ More
The ecologically best way to produce nanoparticles (NP) is based on laser ablation in liquid (LAL). In the considered here case the LAL means that a gold target is irradiated through transparent water. During and after irradiation the heated material from surface of a target forms a plume which expands into liquid.
In this paper we study a reach set of physical processes mixed with complicated hydrodynamic phenomena which all accompany LAL. These theoretical and simulation investigations are very important for practical applications. Laser pulses with different durations $τ_L$ covering 5-th orders of magnitudes range from 0.1 ps to 0.5 ns and large absorbed fluences $F_{abs}$ near optical breakdown of liquid are compared. It is shown that the trajectory of the contact boundary with liquid at the middle and late stages after passing of the instant of maximum intensity of the longest pulse are rather similar for very different pulse durations (of course at comparable energies $F_{abs});$ we consider the pulses with a Gaussian temporal shape $I\propto \exp(-t^2/τ_L^2).$ We follow how hot (few eV range) dense gold plasma expands, cools down, intersects a saturation curve, and condenses into NPs.
These NPs appear first inside the water-gold diffusively mixed intermediate layer where gold vapor has the lowest temperature. Later in time pressure around the gold-water contact drops down below critical pressure for water. Thus NPs find themselves in gaseous water bubble where density of water gradually decreases to $10^{-4}-10^{-5}$ g/cm$\!^3$ at the instant of maximum expansion of a bubble.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Laser-induced ablation of metal in liquid
Authors:
Yu. V. Petrov,
V. A. Khokhlov,
V. V. Zhakhovsky,
N. A. Inogamov
Abstract:
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while…
▽ More
Laser ablation in liquid (LAL) is important perspective way to compose nanoparticles (NP) necessary for modern technologies. LAL is not fully understood. Deep understanding is necessary to optimize processes and decrease high price of the LAL NPs.
Today there are two groups of studies: in one of them scientists go from analyzing of bubble dynamics (thus they proceed from the late stages), while in another one scientists investigate early stages of ablation. In the present paper we consider the process as whole: from ablation and up to formation of a bubble and its inflation. Thus we cover extremely wide range of spatiotemporal scales. We consider role of absorbed energy and duration of pulse (femtosecond, multi-picosecond, nanosecond). Importance of supercritical states is emphasized. Diffusive atomic and hydrodynamic mixing due to Rayleigh-Taylor instability and their mutual interdependence are described. Liquid near contact with metal is heated by dissipation in strong shock and due to small but finite heat conduction in liquid; metal absorbing laser energy is hot and thus it serves as a heater for liquid. Spatial expansion and cooling of atomically mixed liquid and metal causes condensation of metal into NPs when pressure drops below critical pressure for metal. Development of bubble takes place during the next stages of decrease of pressure below critical parameters for liquid and below ambient pressure in liquid. Thin hot layer of liquid near contact expands in volume to many orders of magnitude filling the inflating bubble.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
Formation of solitary microstructure and ablation into transparent dielectric by a subnanosecond laser pulse
Authors:
V. A. Khokhlov,
N. A. Inogamov,
V. V. Zhakhovsky,
Yu. V. Petrov
Abstract:
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical mode…
▽ More
Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical models and computer simulations by thermodynamic, hydrodynamic, and molecular dynamics codes in this direction. Absorbing light metal expanding into transparent solid or liquid dielectrics is considered. We analyze an interplay between diffusion, hydrodynamic instability, and decrease of surface tension down to zero value caused by strong heating and compression transferring matter into state of overcritical fluids. The primary NPs appear during expansion and cooling of diffusion zone when pressure in this zone drops below critical pressure for a metal. Long evolution from the overcritical states to states below a critical point for a metal and down to critical point of liquid and deeply down to surrounding pressure of 1 bar is followed. Conductive heating of liquid from hot metal is significant.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Ultrashort pulse action onto thin film on substrate: Qualitative model of shock propagation in substrate explaining phenomenon of fast growth of a hole with increase of absorbed energy
Authors:
V. V. Shepelev,
N. A. Inogamov,
V. A. Khokhlov,
P. A. Danilov,
S. I. Kudryashov,
A. A. Kuchmizhak,
O. B. Vitrik
Abstract:
Thin films on substrate are important class of targets for surface nanomodification for plasmonic or sensoric applications. There are many papers devoted to this problem. But all of them are concentrated on dynamics of a film, paying small attention to substrate. In these papers the substrate is just an object absorbing the first shock. Here we present another point of view directed onto dynamics…
▽ More
Thin films on substrate are important class of targets for surface nanomodification for plasmonic or sensoric applications. There are many papers devoted to this problem. But all of them are concentrated on dynamics of a film, paying small attention to substrate. In these papers the substrate is just an object absorbing the first shock. Here we present another point of view directed onto dynamics of a substrate. We consider (i) generation of a shock wave (SW) in a support by impact of a contact; (ii) transition from one-dimensional to two-dimensional (2D) propagation of SW; (iii) we analyze lateral propagation of the SW along a film-support contact; and (iv) we calculate pressure in the compressed layer behind the decaying SW. This positive pressure acting from substrate to the film accelerates the film in direction to vacuum. Above some threshold, velocity of accelerated film is enough to separate the film from support. In these cases the circle of separation is significantly wider than the circle of the focal laser spot on film surface. Absorbed laser heat exponentially decays around an irradiated spot $F=F_{\rm c} \exp(-r^2/R_{\rm L}^2)$, where $R_{\rm L}$ is radius of a Gaussian beam, $F$ and $F_{\rm c}$ are local and central fluences, $r$ is a radius from the axis. While the law of decay for the 2D SW in substrate is the power law. Therefore in our case of powerful laser action the edge of a separation circle is defined by propagation of the SW in the support.
△ Less
Submitted 27 November, 2018;
originally announced November 2018.
-
Dynamics of supported ultrathin molybdenum films driven by strong short laser impact
Authors:
V A Khokhlov,
Yu V Petrov,
N A Inogamov,
K P Migdal,
J Winter,
C Aichele,
S Rapp,
H P Huber
Abstract:
We consider expansion, break off, and flight of 10 nm molybdenum film deposited onto glass support. These events are initiated by action of subpicosecond laser pulse onto film. Approximations for two-temperature equation of state and electron--ion coupling parameter are developed. Heat conduction is unimportant because film is ultrathin and because radius of a laser beam is rather large $\sim 10$…
▽ More
We consider expansion, break off, and flight of 10 nm molybdenum film deposited onto glass support. These events are initiated by action of subpicosecond laser pulse onto film. Approximations for two-temperature equation of state and electron--ion coupling parameter are developed. Heat conduction is unimportant because film is ultrathin and because radius of a laser beam is rather large $\sim 10$ $μ$m (thus lateral thermal spreading is insignificant at the considered time scale). We use two-temperature one-dimensional hydrodynamic code to follow evolution of laser induced flow. Additional code for treating transmission and reflection of a monochromatic electromagnetic wave is developed. It is applied to describe interference between transmitted and reflected waves in the layered structure appearing thanks to laser induced expansion and separation of a film.
△ Less
Submitted 26 November, 2018;
originally announced November 2018.
-
Spallative ablation of dielectrics by X-ray laser
Authors:
N. A. Inogamov,
V. V. Zhakhovsky,
A. Ya. Faenov,
V. A. Khokhlov,
V. V. Shepelev,
I. Yu. Skobelev,
Y. Kato,
M. Tanaka,
T. A. Pikuz,
M. Kishimoto,
M. Ishino,
M. Nishikino,
Y. Fukuda,
S. V. Bulanov,
T. Kawachi,
Yu. V. Petrov,
S. I. Anisimov,
V. E. Fortov
Abstract:
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics…
▽ More
Short laser pulse in wide range of wavelengths, from infrared to X-ray, disturbs electron-ion equilibrium and rises pressure in a heated layer. The case where pulse duration $τ_L$ is shorter than acoustic relaxation time $t_s$ is considered in the paper. It is shown that this short pulse may cause thermomechanical phenomena such as spallative ablation regardless to wavelength. While the physics of electron-ion relaxation on wavelength and various electron spectra of substances: there are spectra with an energy gap in semiconductors and dielectrics opposed to gapless continuous spectra in metals. The paper describes entire sequence of thermomechanical processes from expansion, nucleation, foaming, and nanostructuring to spallation with particular attention to spallation by X-ray pulse.
△ Less
Submitted 21 December, 2009; v1 submitted 16 December, 2009;
originally announced December 2009.
-
Two-temperature relaxation and melting after absorption of femtosecond laser pulse
Authors:
N. A. Inogamov,
V. V. Zhakhovskii,
S. I. Ashitkov,
V. A. Khokhlov,
Yu. V. Petrov,
P. S. Komarov,
M. B. Agranat,
S. I. Anisimov,
K. Nishihara
Abstract:
The theory and experiments concerned with the electron-ion thermal relaxation and melting of overheated crystal lattice constitute the subject of this paper. The physical model includes two-temperature equation of state, many-body interatomic potential, the electron-ion energy exchange, electron thermal conductivity, and optical properties of solid, liquid, and two phase solid-liquid mixture. Tw…
▽ More
The theory and experiments concerned with the electron-ion thermal relaxation and melting of overheated crystal lattice constitute the subject of this paper. The physical model includes two-temperature equation of state, many-body interatomic potential, the electron-ion energy exchange, electron thermal conductivity, and optical properties of solid, liquid, and two phase solid-liquid mixture. Two-temperature hydrodynamics and molecular dynamics codes are used. An experimental setup with pump-probe technique is used to follow evolution of an irradiated target with a short time step 100 fs between the probe femtosecond laser pulses. Accuracy of measurements of reflection coefficient and phase of reflected probe light are ~1% and $\sim 1\un{nm}$, respectively. It is found that,
{\it firstly}, the electron-electron collisions make a minor contribution to a light absorbtion in solid Al at moderate intensities;
{\it secondly}, the phase shift of a reflected probe results from heating of ion subsystem and kinetics of melting of Al crystal during $0<t<4\un{ps},$ where $t$ is time delay between the pump and probe pulses measured from the maximum of the pump;
{\it thirdly} the optical response of Au to a pump shows a marked contrast to that of Al on account of excitation of \textit{d}-electrons
△ Less
Submitted 15 December, 2008;
originally announced December 2008.