-
Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling
Authors:
Jonathan Crass,
Andrew Bechter,
Brian Sands,
David L. King,
Ryan Ketterer,
Matthew Engstrom,
Randall Hamper,
Derek Kopon,
James Smous,
Justin R. Crepp,
Manny Montoya,
Oli Durney,
David Cavalieri,
Robert Reynolds,
Michael Vansickle,
Eleanya Onuma,
Joseph Thomes,
Scott Mullin,
Chris Shelton,
Kent Wallace,
Eric Bechter,
Amali Vaz,
Jennifer Power,
Gustavo Rahmer,
Steve Ertel
Abstract:
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, an…
▽ More
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31μm) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope
Authors:
Justin R. Crepp,
Jonathan Crass,
David King,
Andrew Bechter,
Eric Bechter,
Ryan Ketterer,
Robert Reynolds,
Philip Hinz,
Derek Kopon,
David Cavalieri,
Louis Fantano,
Corina Koca,
Eleanya Onuma,
Karl Stapelfeldt,
Joseph Thomes,
Sheila Wall,
Steven Macenka,
James McGuire,
Ronald Korniski,
Leonard Zugby,
Joshua Eisner,
B. Scott Gaudi,
Fred Hearty,
Kaitlin Kratter,
Marc Kuchner
, et al. (9 additional authors not shown)
Abstract:
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000)…
▽ More
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
On-sky single-mode fiber coupling measurements at the Large Binocular Telescope
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
Robert O. Reynolds,
Eric Bechter,
Philip Hinz,
Fernando Pedichini,
Michael Foley,
Elliott Runburg,
Eleanya Onuma,
Scott Gaudi,
Giuseppina Micela,
Isabella Pagano,
Charles E. Woodward
Abstract:
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installe…
▽ More
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $μ$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
Design of the iLocater Acquisition Camera Demonstration System
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
David King,
Bo Zhao,
Robert Reynolds,
Philip Hinz,
Jack Brooks,
Eric Bechter
Abstract:
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater…
▽ More
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
