Showing 1–50 of 165 results for author: Keppens, R

Prominence and coronal rain formation by steady versus stochastic heating and how we can relate it to observations

Authors: V. Jerčić, J. M. Jenkins, R. Keppens

Abstract: Prominences and coronal rain are two forms of coronal condensations for which we still lack satisfactory details on the formation pathways and conditions under which the two come to exist. We compared prominences that formed via a steady versus stochastic type of heating. We performed 2.5D simulations using the open-source MPI-AMRVAC code. To further extend the work and allow for future direct com… ▽ More Prominences and coronal rain are two forms of coronal condensations for which we still lack satisfactory details on the formation pathways and conditions under which the two come to exist. We compared prominences that formed via a steady versus stochastic type of heating. We performed 2.5D simulations using the open-source MPI-AMRVAC code. To further extend the work and allow for future direct comparison with observations, we used Lightweaver to form spectra of the filament view of our steady case prominence. With that, we analysed a reconnection event that shares certain characteristics with nanojets. We show how different forms of localised heating that induce thermal instability result in prominences with different properties. The steady form of heating results in prominence with a clear vertical structure stretching across the magnetic field lines. On the other hand, stochastic heating produces many threads that predominantly have a horizontal motion along the field lines. In the steady heating case, the prominence is relatively static; however, there is evidence of reconnection happening almost the entire time the prominence is present. In the case of stochastic heating, the threads are highly dynamic, with them also exhibiting a form of transverse oscillation (strongly resembling the decayless type). The fact that the threads in the stochastic heating case are constantly moving along the field lines suppresses any conditions for reconnection. It, therefore, appears that, to first order, the choice of heating prescription defines whether the prominence-internal dynamics are oriented vertically or horizontally. We closely inspected a sample reconnection event and computed the synthetic optically thick radiation using the open-source Lightweaver radiative transfer framework. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 16 pages, 14 figures, accepted for publication

Mass Cycle and Dynamics of a Virtual Quiescent Prominence

Authors: Dion Donné, Rony Keppens

Abstract: The mass cycle of solar prominences or filaments is still not completely understood. Researchers agree that these dense structures form by coronal in-situ condensations and plasma siphoning from the underlying chromosphere. In the evaporation-condensation model siphoning arises due to evaporation of chromospheric plasma from localised footpoint heating but this is challenging to justify observatio… ▽ More The mass cycle of solar prominences or filaments is still not completely understood. Researchers agree that these dense structures form by coronal in-situ condensations and plasma siphoning from the underlying chromosphere. In the evaporation-condensation model siphoning arises due to evaporation of chromospheric plasma from localised footpoint heating but this is challenging to justify observationally. Here, we simulate the reconnection-condensation model at extreme-resolutions down to 20.8 km within a three-dimensional magnetohydrodynamic coronal volume. We form a draining, quiescent prominence and associated coronal rain simultaneously. We show that thermal instability --acting as a trigger for local condensation formation-- by itself drives siphoning flows from the low-corona without the need of any localised heating. In addition, for the first time we demonstrate through a statistical analysis along more than 1000 magnetic field lines that cold condensations give rise to siphoning flows within magnetic threads. This siphoning arises from the strong pressure gradient along field lines induced by thermal instability. No correlation is found between siphoning flows and the prominence mass, making thermal instability the main in-situ mass collection mechanism. Our simulated prominence drains by gliding along strongly sheared, asymmetric, dipped magnetic arcades, and develops natural vertical fine-structure in an otherwise horizontal magnetic field due to the magnetic Rayleigh-Taylor instability. By synthesising our data, our model shows remarkable agreement with observations of quiescent prominences such as its dark coronal cavity in extreme-ultraviolet emission channels, fine-scale vertical structure and reconnection outflows which, for the first time, have been self-consistently obtained as the prominence evolves. △ Less

Submitted 30 May, 2024; originally announced May 2024.

Collisional dam** of wave modes in ion-electron plasmas

Authors: Joeri De Vadder, Jordi De Jonghe, Rony Keppens

Abstract: To expand on recent work, we introduce collisional terms in the analysis of the warm ion-electron, two-fluid equations for a homogeneous plasma at rest. Consequently, the plasma is now described by six variables: the magnetisation, the ratio of masses over charges, the electron and ion sound speeds, the angle between the wave vector and the magnetic field, and a new parameter describing the electr… ▽ More To expand on recent work, we introduce collisional terms in the analysis of the warm ion-electron, two-fluid equations for a homogeneous plasma at rest. Consequently, the plasma is now described by six variables: the magnetisation, the ratio of masses over charges, the electron and ion sound speeds, the angle between the wave vector and the magnetic field, and a new parameter describing the electron-ion collision frequency. This additional parameter does not introduce new wave modes compared to the collisionless case, but does result in complex mode frequencies. Both for the backward and forward propagating modes the imaginary components are negative and thus quantify collisional dam**. We provide convenient (polynomial) expressions to quantify frequencies and dam** rates in all short and long wavelength limits, including the cut-off and resonance limits, whilst the one-fluid magnetohydrodynamic limit is retained with the familiar undamped slow, Alfvén and fast (SAF) waves. As collisions only introduce a dam**, the previously introduced labelling of the wave modes S, A, F, M, O and X can be kept and assigned based on their long and short wavelength behaviour. The obtained dam** at cut-off and resonance limits is parametrised with the collision frequency, and can be tailored to match known kinetic dam** expressions. It is demonstrated that varying the angle can introduce crossings between the wave modes, as was already present in the ideal ion-electron case, but also a collision frequency exceeding a critical collision frequency can lead to crossings at angles where previously only avoided crossings were found. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Comments: 18 pages, 8 figures, 1 table. The following article has been accepted by Journal of Plasma Physics

From eruption to post-flare rain: a 2.5D MHD model

Authors: Samrat Sen, Avijeet Prasad, Valeriia Liakh, Rony Keppens

Abstract: The formation of the MFRs in the pre-flare stage, and how this leads to coronal rain in a post-eruption magnetic loop is not fully understood. We explore the formation, and eruption of MFRs, followed by the appearance of coronal rain in the post-flare loops, to understand the magnetic and thermodynamic properties of eruptive events and their multi-thermal aspects in the solar atmosphere. We perfor… ▽ More The formation of the MFRs in the pre-flare stage, and how this leads to coronal rain in a post-eruption magnetic loop is not fully understood. We explore the formation, and eruption of MFRs, followed by the appearance of coronal rain in the post-flare loops, to understand the magnetic and thermodynamic properties of eruptive events and their multi-thermal aspects in the solar atmosphere. We perform a resistive-magnetohydrodynamic (MHD) simulation with the open-source code \texttt{MPI-AMRVAC} to explore the evolution of sheared magnetic arcades that can lead to flux rope eruptions. The system is in mechanical imbalance at the initial state, and evolves self-consistently in a non-adiabatic atmosphere under the influence of radiative losses, thermal conduction, and background heating. We use an additional level of adaptive mesh refinement to achieve the smallest cell size of $\approx 32.7$ km in each direction to reveal the fine structures in the system. The system achieves a semi-equilibrium state after a short transient evolution from its initial mechanically imbalanced condition. A series of erupting MFRs is formed due to spontaneous magnetic reconnection, across current sheets created underneath the erupting flux ropes. Gradual development of thermal imbalance is noticed at a loop top in the post-eruption phase, which leads to catastrophic cooling and formation of condensations. We obtain plasma blobs which fall down along the magnetic loop in the form of coronal rain. The dynamical and thermodynamic properties of these cool-condensations are in good agreement with observations of post-flare coronal rain. The presented simulation supports the development and eruption of multiple MFRs, and the formation of coronal rain in post-flare loops, which is one of the key aspects to reveal the coronal heating mystery in the solar atmosphere. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Comments: Accepted for publication in Astronomy and Astrophysics journal. The animation associated with Figure 3 is available on request from the corresponding author. Comments are welcome

BxC Toolkit: Generating Tailored Turbulent 3D Magnetic Fields

Authors: Daniela Maci, Rony Keppens, Fabio Bacchini

Abstract: Turbulent states are ubiquitous in plasmas and the understanding of turbulence is fundamental in modern astrophysics. Numerical simulations, which are the state-of-the-art approach to the study of turbulence, require substantial computing resources. Recently, attention shifted to methods for generating synthetic turbulent magnetic fields, affordably creating fields with parameter-controlled charac… ▽ More Turbulent states are ubiquitous in plasmas and the understanding of turbulence is fundamental in modern astrophysics. Numerical simulations, which are the state-of-the-art approach to the study of turbulence, require substantial computing resources. Recently, attention shifted to methods for generating synthetic turbulent magnetic fields, affordably creating fields with parameter-controlled characteristic features of turbulence. In this context, the BxC toolkit was developed and validated against direct numerical simulations (DNS) of isotropic turbulent magnetic fields. Here, we demonstrate novel extensions of BxC to generate realistic turbulent magnetic fields in a fast, controlled, geometric approach. First, we perform a parameter study to determine quantitative relations between the BxC input parameters and desired characteristic features of the turbulent power spectrum, such as the extent of the inertial range, its spectral slope, and the injection and dissipation scale. Second, we introduce in the model a set of structured background magnetic fields B0, as a natural and more realistic extension to the purely isotropic turbulent fields. Third, we extend the model to include anisotropic turbulence properties in the generated fields. With all these extensions combined, our tool can quickly generate any desired structured magnetic field with controlled, anisotropic turbulent fluctuations, faster by orders of magnitude with respect to DNSs. These can be used, e.g., to provide initial conditions for DNS simulations or easily generate synthetic data for many astrophysical settings, all at otherwise unaffordable resolutions. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Frozen-field Modeling of Coronal Condensations with MPI-AMRVAC I: Demonstration in two-dimensional models

Authors: Yuhao Zhou, Xiaohong Li, Rony Keppens

Abstract: Large-scale coronal plasma evolutions can be adequately described by magnetohydrodynamics (MHD) equations. However, full multi-dimensional MHD simulations require substantial computational resources. Given the low plasma $β$ in the solar corona, in many coronal studies, it suffices to approximate the magnetic field to remain topologically fixed and effectively conduct one-dimensional (1D) hydrodyn… ▽ More Large-scale coronal plasma evolutions can be adequately described by magnetohydrodynamics (MHD) equations. However, full multi-dimensional MHD simulations require substantial computational resources. Given the low plasma $β$ in the solar corona, in many coronal studies, it suffices to approximate the magnetic field to remain topologically fixed and effectively conduct one-dimensional (1D) hydrodynamic (HD) simulations instead. This approach is often employed in studies of coronal loops and their liability to form condensations related to thermal instability. While 1D HD simulations along given and fixed field line shapes are convenient and fast, they are difficult to directly compare with multi-dimensional phenomena. Therefore, it is more convenient to solve volume-filling, multi-dimensional versions of the MHD equations where we freeze the magnetic field, transforming it into frozen-field HD (ffHD) equations for simulation. We have incorporated this ffHD module into our open-source MPI-AMRVAC code and tested it using a two-dimensional (2D) evaporation--condensation model to study prominence formation due to radiative losses. The 2D ffHD results are compared with those from actual 2D MHD and pseudo-2D HD simulations, analyzing the differences and their causes. Pseudo-2D studies account for the known {flux tube} expansion effects. Overall, the performance of 2D ffHD is close to that of 2D MHD and pseudo-2D HD. The 2D tests conducted in this paper will be extended in follow-up studies to 3D simulations based on analytical or observational approaches. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: Accepted for publication in ApJ. 25 pages, 8 figures

Resolved magnetohydrodynamic wave lensing in the solar corona

Authors: ** Zhou, Yuandeng Shen, Ding Yuan, Rony Keppens, Xiaozhou Zhao, Libo Fu, Zehao Tang, Jiaoyang Wang, Chengrui Zhou

Abstract: Electromagnetic wave lensing, a common physical phenomenon recognized in visible light for centuries, finds extensive applications in manipulating light in optical systems such as telescopes and cameras. Magnetohydrodynamic wave is a common perturbation phenomenon in the corona. By using high spatio-temporal resolution observations from the Solar Dynamics Observatory, here, we report the observati… ▽ More Electromagnetic wave lensing, a common physical phenomenon recognized in visible light for centuries, finds extensive applications in manipulating light in optical systems such as telescopes and cameras. Magnetohydrodynamic wave is a common perturbation phenomenon in the corona. By using high spatio-temporal resolution observations from the Solar Dynamics Observatory, here, we report the observation of a magnetohydrodynamic wave lensing in the highly ionized and magnetized coronal plasma, where quasi-periodic wavefronts emanated from a flare converged at a specific point after traversing a coronal hole. The entire process resembles an electromagnetic wave lensing from the source to the focus. Meanwhile, the magnetohydrodynamic wave lensing is well reproduced through a magnetohydrodynamic numerical simulation with full spatio-temporal resolution. We further investigate potential applications for coronal seismology, as the lensing process encodes information on the Alfvén speed, in conjunction with favorable geometric and density variations. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 24 pages, 9 figures, 1 table, published in Nature Communications

Journal ref: Nat Commun 15, 3281 (2024)

From MRI to SARI: Parametric survey of accretion disk instabilities

Authors: Nicolas Brughmans, Rony Keppens, Hans Goedbloed

Abstract: Accretion disks are highly unstable to magnetic instabilities driven by shear flow, where classically, the axisymmetric, weak-field Magneto-Rotational Instability (MRI) has received much attention through local WKB approximations. In contrast, discrete non-axisymmetric counterparts require a more involved analysis through a full global approach to deal with the influence of the nearby magnetohydro… ▽ More Accretion disks are highly unstable to magnetic instabilities driven by shear flow, where classically, the axisymmetric, weak-field Magneto-Rotational Instability (MRI) has received much attention through local WKB approximations. In contrast, discrete non-axisymmetric counterparts require a more involved analysis through a full global approach to deal with the influence of the nearby magnetohydrodynamic (MHD) continua. Recently, rigorous MHD spectroscopy identified a new type of an ultra-localised, non-axisymmetric instability in global disks with super-Alfvénic flow. These Super-Alfvénic Rotational Instabilities (SARIs) fill vast unstable regions in the complex eigenfrequency plane with (near-eigen)modes that corotate at the local Doppler velocity and are radially localised between Alfvénic resonances. Unlike discrete modes, they are utterly insensitive to the radial disk boundaries. In this work, we independently confirm the existence of these unprecedented modes using our novel spectral MHD code Legolas reproducing and extending our earlier study with detailed eigenspectra and eigenfunctions. We calculate growth rates of SARIs and MRI in a variety of disk equilibria, highlighting the impact of field strength and orientation, and find correspondence with analytical predictions for thin, weakly magnetised disks. We show that non-axisymmetric modes can significantly extend instability regimes at high mode numbers, with maximal growth rates comparable to the MRI. Furthermore, we explicitly show a region filled with quasi-modes whose eigenfunctions are extremely localised in all directions. These modes must be ubiquitous in accretion disks, and play a role in local shearing box simulations. Finally, we revisit recent dispersion relations in the Appendix, highlighting their relation to our global framework. △ Less

Submitted 10 April, 2024; originally announced April 2024.

The Lorentz force at work: multi-phase magnetohydrodynamics throughout a flare lifespan

Authors: Wenzhi Ruan, Rony Keppens, Limei Yan, Patrick Antolin

Abstract: The hour-long, gradual phase of solar flares is well-observed across the electromagnetic spectrum, demonstrating many multi-phase aspects, where cold condensations form within the heated post-flare system, but a complete three-dimensional (3D) model is lacking. Using a state-of-the-art 3D magnetohydrodynamic simulation, we identify the key role played by the Lorentz force through the entire flare… ▽ More The hour-long, gradual phase of solar flares is well-observed across the electromagnetic spectrum, demonstrating many multi-phase aspects, where cold condensations form within the heated post-flare system, but a complete three-dimensional (3D) model is lacking. Using a state-of-the-art 3D magnetohydrodynamic simulation, we identify the key role played by the Lorentz force through the entire flare lifespan, and show that slow variations in the post-flare magnetic field achieve the bulk of the energy release. Synthetic images in multiple passbands closely match flare observations, and we quantify the role of conductive, radiative and Lorentz force work contributions from flare onset to decay. This highlights how the non-force-free nature of the magnetic topology is crucial to trigger Rayleigh-Taylor dynamics, observed as waving coronal rays in extreme ultraviolet observations. Our C-class solar flare reproduces multi-phase aspects such as post-flare coronal rain. In agreement with observations, we find strands of cooler plasma forming spontaneously by catastrophic cooling, leading to cool plasma draining down the post-flare loops. As there is force balance between magnetic pressure and tension and the plasma pressure in gradual-phase flare loops, this has potential for coronal seismology to decipher the magnetic field strength variation from observations. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: 22 pages, 10 figures

MSC Class: 85-10

Radiative loss and ion-neutral collisional effects in astrophysical plasmas

Authors: Beatrice Popescu Braileanu, Rony Keppens

Abstract: In this paper we study the role of radiative cooling in a two-fluid model consisting of coupled neutrals and charged particles. We first analyze the linearized two-fluid equations where we include radiative losses in the energy equation for the charged particles. In a 1D geometry for parallel propagation and in the limiting cases of weak and strong coupling, it can be shown analytically that the i… ▽ More In this paper we study the role of radiative cooling in a two-fluid model consisting of coupled neutrals and charged particles. We first analyze the linearized two-fluid equations where we include radiative losses in the energy equation for the charged particles. In a 1D geometry for parallel propagation and in the limiting cases of weak and strong coupling, it can be shown analytically that the instability conditions for the thermal mode and the sound waves, the isobaric and isentropic criteria, respectively, remain unchanged with respect to one-fluid radiative plasmas. For the parameters considered in this paper, representative for the solar corona, the radiative cooling produces growth of the thermal mode and dam** of the sound waves. When neutrals are included and are sufficiently coupled to the charges, the thermal mode growth rate and the wave dam** both reduce by the same factor, which depends on the ionization fraction only. For a heating function which is constant in time, we find that the growth of the thermal mode and the dam** of the sound waves are slightly larger. The numerical calculation of the eigenvalues of the general system of equations in a 3D geometry confirm the analytic results. We then run 2D fully nonlinear simulations which give consistent results: a higher ionization fraction or lower coupling will increase the growth rate. The magnetic field contribution is negligible in the linear phase. Ionization-recombination effects might play an important role because the radiative cooling produces a large range of temperatures in the system. In the numerical simulation, after the first condensation phase, when the minimum temperature is reached, the fraction of neutrals increases four orders of magnitude because of the recombination. △ Less

Submitted 18 March, 2024; originally announced March 2024.

The Bright Rim Prominences according to 2.5D Radiative Transfer

Authors: Jack M. Jenkins, Christopher M. J. Osborne, Ye Qiu, Rony Keppens, Chuan Li

Abstract: Solar prominences observed close to the limb commonly include a bright feature that, from the perspective of the observer, runs along the interface between itself and the underlying chromosphere. Despite several idealised models being proposed to explain the underlying physics, a more general approach remains outstanding. In this manuscript we demonstrate as a proof-of-concept the first steps in a… ▽ More Solar prominences observed close to the limb commonly include a bright feature that, from the perspective of the observer, runs along the interface between itself and the underlying chromosphere. Despite several idealised models being proposed to explain the underlying physics, a more general approach remains outstanding. In this manuscript we demonstrate as a proof-of-concept the first steps in applying the Lightweaver radiative transfer framework's 2.5D extension to a `toy' model prominence + VAL3C chromosphere, inspired by recent 1.5D experiments that demonstrated a significant radiative chromosphere--prominence interaction. We find the radiative connection to be significant enough to enhance both the electron number density within the chromosphere, as well as its emergent intensity across a range of spectral lines in the vicinity of the filament absorption signature. Inclining the viewing angle from the vertical, we find these enhancements to become increasingly asymmetric and merge with a larger secondary enhancement sourced directly from the prominence underside. In wavelength, the enhancements are then found to be the largest in both magnitude and horizontal extent for the spectral line cores, decreasing into the line wings. Similar behaviour is found within new Chinese H$α$ Solar Explorer (CHASE)/H$α$ Imaging Spectrograph (HIS) observations, opening the door for subsequent statistical confirmations of the theoretical basis we develop here. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Comments: 9 pages, 5 figures, accepted for publication in The Astrophysical Journal Letters (ApJL)

Particle Trap** and Acceleration in Turbulent Post-flare Coronal Loops

Authors: Fabio Bacchini, Wenzhi Ruan, Rony Keppens

Abstract: We present a study of energetic-electron trap** and acceleration in the Kelvin-Helmholtz-induced magnetohydrodynamic (MHD) turbulence of post-flare loops in the solar corona. Using the particle-tracing capabilities of MPI-AMRVAC 3.0, we evolve ensembles of test electrons (i.e. without feedback to the underlying MHD) inside the turbulent looptop, using the guiding-center approximation. With the M… ▽ More We present a study of energetic-electron trap** and acceleration in the Kelvin-Helmholtz-induced magnetohydrodynamic (MHD) turbulence of post-flare loops in the solar corona. Using the particle-tracing capabilities of MPI-AMRVAC 3.0, we evolve ensembles of test electrons (i.e. without feedback to the underlying MHD) inside the turbulent looptop, using the guiding-center approximation. With the MHD looptop model of Ruan et al. 2018, we investigate the relation between turbulence and particle trap** inside the looptop structure, showing that better-developed turbulent cascades result in more efficient trap** primarily due to mirror effects. We then quantify the electron acceleration in the time-evolving MHD turbulence, and find that ideal-MHD processes inside the looptop can produce nonthermal particle spectra from an initial Maxwellian distribution. Electrons in this turbulence are preferentially accelerated by mirror effects in the direction perpendicular to the local magnetic field while remaining confined within small regions of space between magnetic islands. Assuming dominance of Bremsstrahlung radiation mechanisms, we employ the resulting information from accelerated electrons (combined with the MHD background) to construct HXR spectra of the post-flare loop that include nonthermal-particle contributions. Our results pave the way to constructing more realistic simulations of radiative coronal structure for comparison with current and future observations. △ Less

Submitted 11 March, 2024; originally announced March 2024.

Comments: Accepted in MNRAS

A spectroscopic investigation of thermal instability for cylindrical equilibria with background flow

Authors: Joris Hermans, Rony Keppens

Abstract: Flows are omnipresent and govern the dynamics of plasma. Solar tornadoes are a class of apparently rotating prominences, that might be formed by thermal instability. In spectroscopic studies on thermal instability background flow is commonly neglected. We here determine the effect of background flow on thermal instability in cylindrical magnetic field configurations as the influence of various par… ▽ More Flows are omnipresent and govern the dynamics of plasma. Solar tornadoes are a class of apparently rotating prominences, that might be formed by thermal instability. In spectroscopic studies on thermal instability background flow is commonly neglected. We here determine the effect of background flow on thermal instability in cylindrical magnetic field configurations as the influence of various parameters on the MHD spectrum. We investigate discrete thermal modes. In an analytical study, we extend upon the literature by including a generic background flow in a cylindrical coordinate system. The non-adiabatic MHD equations are linearised, Fourier-analysed, and are examined to understand how a background flow changes the continua. An approximate expression for discrete thermal modes is derived using a WKB analysis. The analytical results are then verified for a benchmark equilibrium using the eigenvalue code Legolas. The eigenfunctions of discrete thermal modes are visualised in 2D and 3D. The thermal continuum is Doppler-shifted due to the background flow, just like the slow and Alfvén continua. Discrete modes are altered because the governing equations contain flow-related terms. An approximate expression to predict the appearance of discrete thermal modes based on the equilibrium parameters is derived. All analytical expressions match the numerical results. The distribution of the density perturbations of the discrete thermal modes is not a singular condensation. 3D visualisation of the total velocity field shows that the helical field is heavily influenced by the radial velocity perturbation. We derived analytic expressions for non-adiabatic MHD modes of a cylindrical equilibrium with background flow and verified them using a coronal equilibrium. However, the equations are valid for and can be applied in other astrophysical environments. △ Less

Submitted 29 February, 2024; originally announced March 2024.

Comments: 19 pages, 22 figures, accepted for publication by A&A

Journal ref: A&A 686, A180 (2024)

Modification of the resistive tearing instability with Joule heating by shear flow

Authors: Jordi De Jonghe, Rony Keppens

Abstract: We investigate the influence of background shear flow on linear resistive tearing instabilities with Joule heating for two compressible plasma slab configurations: a Harris current sheet and a force-free, shearing magnetic field that varies its direction periodically throughout the slab, possibly resulting in multiple magnetic nullplanes. To do so, we exploit the latest version of the open-source,… ▽ More We investigate the influence of background shear flow on linear resistive tearing instabilities with Joule heating for two compressible plasma slab configurations: a Harris current sheet and a force-free, shearing magnetic field that varies its direction periodically throughout the slab, possibly resulting in multiple magnetic nullplanes. To do so, we exploit the latest version of the open-source, magnetohydrodynamic spectroscopy tool Legolas. Shear flow is shown to dramatically alter tearing behaviour in the presence of multiple magnetic nullplanes, where the modes become propagating due to the flow. Finally, the tearing growth rate is studied as a function of resistivity, showing where it deviates from analytic scaling laws, as well as the Alfvén speed, the plasma-beta, and the velocity parameters, revealing surprising nuance in whether the velocity acts stabilising or destabilising. We show how both slab setups can produce growth rate regimes which deviate from analytic scaling laws, such that systematic numerical spectroscopic studies are truly necessary, for a complete understanding of linear tearing behaviour in flowing plasmas. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Comments: 20 pages, 14 figures, 1 table. Accepted for publication in Physics of Plasmas

Rotation and Confined Eruption of a Double Flux-Rope System

Authors: Xiaomeng Zhang, **han Guo, Yang Guo, Mingde Ding, Rony Keppens

Abstract: We perform a data-constrained simulation with the zero-$β$ assumption to study the mechanisms of strong rotation and failed eruption of a filament in active region 11474 on 2012 May 5 observed by Solar Dynamics Observatory and Solar Terrestrial Relations Observatory. The initial magnetic field is provided by nonlinear force-free field extrapolation, which is reconstructed by the regularized Biot-S… ▽ More We perform a data-constrained simulation with the zero-$β$ assumption to study the mechanisms of strong rotation and failed eruption of a filament in active region 11474 on 2012 May 5 observed by Solar Dynamics Observatory and Solar Terrestrial Relations Observatory. The initial magnetic field is provided by nonlinear force-free field extrapolation, which is reconstructed by the regularized Biot-Savart laws and magnetofrictional method. Our simulation reproduces most observational features very well, e.g., the filament large-angle rotation of about $130 ^{\circ}$, the confined eruption and the flare ribbons, allowing us to analyze the underlying physical processes behind observations. We discover two flux ropes in the sigmoid system, an upper flux rope (MFR1) and a lower flux rope (MFR2), which correspond to the filament and hot channel in observations, respectively. Both flux ropes undergo confined eruptions. MFR2 grows by tether-cutting reconnection during the eruption. The rotation of MFR1 is related to the shear-field component along the axis. The toroidal field tension force and the non-axisymmetry forces confine the eruption of MFR1. We also suggest that the mutual interaction between MFR1 and MFR2 contributes to the large-angle rotation and the eruption failure. In addition, we calculate the temporal evolution of the twist and writhe of MFR1, which is a hint of probable reversal rotation. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Comments: 18 pages, 7 figures, Accepted for publication in ApJ

Wave transformations near a coronal magnetic null-point

Authors: Nitin Yadav, Rony Keppens

Abstract: We investigate the viability of MHD waves, in particular acoustic p-modes, in causing strong current accumulation at the null points. We begin with a three-dimensional numerical setup incorporating a gravitationally stratifed solar atmosphere and an axially symmetric magnetic feld including a coronal magnetic null point. To excite waves, we employ wave drivers mimicking global p-modes. We found th… ▽ More We investigate the viability of MHD waves, in particular acoustic p-modes, in causing strong current accumulation at the null points. We begin with a three-dimensional numerical setup incorporating a gravitationally stratifed solar atmosphere and an axially symmetric magnetic feld including a coronal magnetic null point. To excite waves, we employ wave drivers mimicking global p-modes. We found that most of the vertical velocity transmits through the Alfvén acoustic equipartition layer maintaining acoustic nature while a small fraction generates fast waves via the mode conversion process. The fast waves undergo almost total refection at the transition region due to sharp gradients in density and Alfvén speed. There are only weak signatures of Alfvén wave generation near the transition region due to fast-to-Alfvén mode conversion. Since the slow waves propagate with the local sound speed, they are not much afected by the density gradients at the transition region and undergo secondary mode conversion and transmission at the Alfvén-acoustic equipartition layer surrounding the null point, leading to fast wave focusing at the null point. These fast waves have associated perturbations in current density, showing oscillatory signatures compatible with the second harmonic of the driving frequency which could result in resistive heating and enhanced intensity in the presence of fnite resistivity. We conclude that MHD waves could be a potential source for oscillatory current dissipation around the magnetic null point. We conjecture that besides oscillatory magnetic reconnection, global p-modes could lead to the formation of various quasiperiodic energetic events. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Comments: accepted for publication in Astronomy and Astrophysics journal

Toroidal Miller-Turner and Soloviev CME models in EUHFORIA: I. Implementation

Authors: L. Linan, A. Maharana, S. Poedts, B. Schmieder, R. Keppens

Abstract: The aim of this paper is to present the implementation of two new CME models in the space weather forecasting tool, EUHFORIA. We introduce the two toroidal CME models analytically, along with their numerical implementation in EUHFORIA. One model is based on the modified Miller-Turner (mMT) solution, while the other is derived from the Soloviev equilibrium, a specific solution of the Grad-Shafranov… ▽ More The aim of this paper is to present the implementation of two new CME models in the space weather forecasting tool, EUHFORIA. We introduce the two toroidal CME models analytically, along with their numerical implementation in EUHFORIA. One model is based on the modified Miller-Turner (mMT) solution, while the other is derived from the Soloviev equilibrium, a specific solution of the Grad-Shafranov equation. The magnetic field distribution in both models is provided in analytic formulae, enabling a swift numerical computation. After detailing the differences between the two models, we present a collection of thermodynamic and magnetic profiles obtained at Earth using these CME solutions in EUHFORIA with a realistic solar wind background. Subsequently, we explore the influence of their initial parameters on the time profiles at L1. In particular, we examine the impact of the initial density, magnetic field strength, velocity, and minor radius. In EUHFORIA, we obtained different thermodynamic and magnetic profiles depending on the CME model used. We found that changing the initial parameters affects both the amplitude and the trend of the time profiles. For example, using a high initial speed results in a fast evolving and compressed magnetic structure. The speed of the CME is also linked to the strength of the initial magnetic field due to the contribution of the Lorentz force on the CME expansion. However, increasing the initial magnetic field also increases the computation time. Finally, the expansion and integrity of the magnetic structure can be controlled via the initial density of the CME. Both toroidal CME models are successfully implemented in EUHFORIA and can be utilized to predict the geo-effectiveness of the impact of real CME events. Moreover, the current implementation could be easily modified to model other toroidal magnetic configurations. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Chromospheric evaporation by particle beams in multi-dimensional flare models

Authors: Malcolm Keith Druett, Wenzhi Ruan, Rony Keppens

Abstract: Evaporation of chromospheric plasma by particle beams has been a standard feature of models of solar flares for many decades, supported both by observations of strong hard X-ray bremsstrahlung signals, and detailed 1D hydrodynamic radiative transfer models with near-relativistic electron beams included. However in multi-dimensional models, evaporation, if included, has only been driven by heat con… ▽ More Evaporation of chromospheric plasma by particle beams has been a standard feature of models of solar flares for many decades, supported both by observations of strong hard X-ray bremsstrahlung signals, and detailed 1D hydrodynamic radiative transfer models with near-relativistic electron beams included. However in multi-dimensional models, evaporation, if included, has only been driven by heat conduction and by the impact and reflection of fast plasma outflows on the lower atmosphere. Here we present the first multi-dimensional flare simulation featuring evaporation driven by energetic electrons. We use a recent magnetohydrodynamic model that includes beam physics, but decrease the initial anomalous resistivity to create a gentler precursor phase, and improve on the dynamic resistivity treatment that determines where beams are injected. Beam-driven evaporation is achieved. The relevant factors are thermal conduction and electron beams, with the beam electrons more than doubling the kinetic energy flux, and adding 50% to the upward mass from the chromosphere. These findings finally pave the way for integrating detailed 1D flare modelling within a self-consistent 2D and 3D context. The beam fluxes from these self-consistent models can be used to directly compare multi-dimensional results with those from the externally injected beam fluxes of 1D models, as well as understand further evaporation-driven phenomena relating to beams of particles. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: Accept in Solar Physics

Exploring self-consistent 2.5 D flare simulations with MPI-AMRVAC

Authors: Malcolm Druett, Wenzhi Ruan, Rony Keppens

Abstract: Context. Multi-dimensional solar flare simulations have not yet included detailed analysis of the lower atmospheric responses such as down-flowing chromospheric compressions and chromospheric evaporation processes. Aims. We present an analysis of multi-dimensional flare simulations, including analysis of chromospheric up-flows and down-flows that provide important groundwork for comparing 1D and… ▽ More Context. Multi-dimensional solar flare simulations have not yet included detailed analysis of the lower atmospheric responses such as down-flowing chromospheric compressions and chromospheric evaporation processes. Aims. We present an analysis of multi-dimensional flare simulations, including analysis of chromospheric up-flows and down-flows that provide important groundwork for comparing 1D and multi-dimensional models. Methods. We follow the evolution of an MHD standard solar flare model including electron beams, where localized anomalous resistivity initiates magnetic reconnection. We vary the background magnetic field strength, to produce simulations that cover a large span of observationally reported solar flare strengths. Chromospheric energy fluxes, and energy density maps are used to analyse the transport of energy from the corona to the lower atmosphere, and the resultant evolution of the flare. Quantities traced along 1D field-lines allow for detailed comparison with 1D evaporation models. △ Less

Submitted 1 February, 2024; v1 submitted 15 October, 2023; originally announced October 2023.

Comments: Accepted to A&A

Data-constrained Magnetohydrodynamic Simulation of an Intermediate Solar Filament Eruption

Authors: Yang Guo, **han Guo, Yiwei Ni, M. D. Ding, P. F. Chen, Chun Xia, Rony Keppens, Kai E. Yang

Abstract: Solar eruptive activities could occur in weak magnetic field environments and over large spatial scales, especially relevant to eruptions involving intermediate or quiescent solar filaments. To handle the large scales, we implement and apply a flux rope embedding method using regularized Biot-Savart laws in the spherical coordinate system. Combined with a potential field source surface model and a… ▽ More Solar eruptive activities could occur in weak magnetic field environments and over large spatial scales, especially relevant to eruptions involving intermediate or quiescent solar filaments. To handle the large scales, we implement and apply a flux rope embedding method using regularized Biot-Savart laws in the spherical coordinate system. Combined with a potential field source surface model and a magneto-frictional method, a nonlinear force-free field comprising a flux rope embedded in a potential field is constructed. Using the combined nonlinear force-free field as the initial condition, we then perform a zero-$β$ data-constrained magnetohydrodynamic (MHD) simulation for an M8.7 flare at 03:38 UT on 2012 January 23. The MHD model reproduces the eruption process, flare ribbon evolution (represented by the quasi-separatrix layer evolution) and kinematics of the flux rope. This approach could potentially model global-scale eruptions from weak field regions. △ Less

Submitted 3 September, 2023; originally announced September 2023.

Comments: 23 pages, 7 figures, accepted for publicaiton in ApJ

3D coupled tearing-thermal evolution in solar current sheets

Authors: Samrat Sen, Jack Jenkins, Rony Keppens

Abstract: Combined tearing-thermal evolution plays an important role in the disruption of current sheets, and formation of cool condensations within the solar atmosphere. However, this has received limited attention to date. We numerically explore a combined tearing and thermal instability that causes the break up of an idealized current sheet in the solar atmosphere. The thermal component leads to the form… ▽ More Combined tearing-thermal evolution plays an important role in the disruption of current sheets, and formation of cool condensations within the solar atmosphere. However, this has received limited attention to date. We numerically explore a combined tearing and thermal instability that causes the break up of an idealized current sheet in the solar atmosphere. The thermal component leads to the formation of localized, cool condensations within an otherwise 3D reconnecting magnetic topology. We construct a 3D resistive magnetohydrodynamic simulation of a force-free current sheet under solar atmospheric conditions that incorporate the non-adiabatic influence of background heating, optically thin radiative energy loss, and magnetic field aligned thermal conduction with the open source code MPI-AMRVAC. Multiple levels of adaptive mesh refinement reveal the self-consistent development of finer-scale condensation structures within the evolving system. The instability in the current sheet is triggered by magnetic field perturbations concentrated around the current sheet plane, and subsequent tearing modes develop. This in turn drives thermal runaway associated with the thermal instability of the system. We find subsequent, localized cool plasma condensations that form under the prevailing low plasma-$β$ conditions, and demonstrate that the density and temperature of these condensed structures are similar to more quiescent coronal condensations. Synthetic counterparts at Extreme-UltraViolet (EUV) and optical wavelengths show the formation of plasmoids (in EUV), and coronal condensations similar to prominences and coronal rain blobs in the vicinity of the reconnecting sheet. Our simulations imply that 3D reconnection in solar current sheets may well present an almost unavoidable multi-thermal aspect, that forms during their coupled tearing-thermal evolution. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Comments: Accepted for publication in Astronomy and Astrophysics journal

Journal ref: A&A 678, A132 (2023)

Rotational flows in solar coronal flux rope cavities

Authors: Valeriia Liakh, Rony Keppens

Abstract: We present a 2.5-dimensional magnetohydrodynamic simulation of a systematically rotating prominence inside its coronal cavity using the open-source \texttt{MPI-AMRVAC} code. Our simulation starts from a non-adiabatic, gravitationally stratified corona, permeated with a sheared arcade magnetic structure. The flux rope (FR) is formed through converging and shearing footpoints driving, simultaneously… ▽ More We present a 2.5-dimensional magnetohydrodynamic simulation of a systematically rotating prominence inside its coronal cavity using the open-source \texttt{MPI-AMRVAC} code. Our simulation starts from a non-adiabatic, gravitationally stratified corona, permeated with a sheared arcade magnetic structure. The flux rope (FR) is formed through converging and shearing footpoints driving, simultaneously applying randomized heating at the bottom. The latter induces a left-right asymmetry of temperature and density distributions with respect to the polarity-inversion line. This asymmetry drives flows along the loops before the FR formation, which gets converted to net rotational motions upon reconnection of the field lines. As the thermal instability within the FR develops, angular momentum conservation about its axis leads to a systematic rotation of both hot coronal and cold condensed plasma. The initial rotational velocity exceeds $60\ \mathrm{km\ s^{-1}}$. The synthesized images confirm the simultaneous rotations of the coronal plasma seen in 211 and 193 Å and condensations seen in 304 Å. Furthermore, the formation of the dark cavity is evident in 211 and 193 Å images. Our numerical experiment is inspired by observations of so-called giant solar prominence tornadoes, and reveals that asymmetric FR formation can be crucial in triggering rotational motions. We reproduce observed spinning motions inside the coronal cavity, augmenting our understanding of the complex dynamics of rotating prominences. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: 11 pages,5 figures, accepted for publication in The Astrophysical Journal Letters

Legolas 2.0: Improvements and extensions to an MHD spectroscopic framework

Authors: Niels Claes, Rony Keppens

Abstract: We report on recent extensions and improvements to the Legolas code, which is an open-source, finite element-based numerical framework to solve the linearised (magneto)hydrodynamic equations for a three-dimensional force- and thermally balanced state with a nontrivial one-dimensional variation. The standard Fourier modes imposed give rise to a complex, generalised non-Hermitian eigenvalue problem… ▽ More We report on recent extensions and improvements to the Legolas code, which is an open-source, finite element-based numerical framework to solve the linearised (magneto)hydrodynamic equations for a three-dimensional force- and thermally balanced state with a nontrivial one-dimensional variation. The standard Fourier modes imposed give rise to a complex, generalised non-Hermitian eigenvalue problem which is solved to quantify all linear wave modes of the given system in either Cartesian or cylindrical geometries. The framework now supports subsystems of the eight linearised MHD equations, allowing for pure hydrodynamic setups, only one-dimensional density/temperature/velocity variations, or the option to treat specific closure relations. We discuss optimisations to the internal datastructure and eigenvalue solvers, showing a considerable performance increase in both execution time and memory usage. Additionally the code now has the capability to fully visualise eigenfunctions associated with given wave modes in multiple dimensions, which we apply to standard Kelvin-Helmholtz and Rayleigh-Taylor instabilities in hydrodynamics, thereby providing convincing links between linear stability analysis and the onset of non-linear phenomena. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Comments: Accepted for CPC

Two-fluid reconnection jets in a gravitationally stratified atmosphere

Authors: B. Popescu Braileanu, R. Keppens

Abstract: The density decreases exponentially with height in the solar gravitationally stratified atmosphere, therefore the collisional coupling between the ionized plasma and the neutrals also decreases. Here, we investigate the role of collisions between ions and neutrals on the reconnection process occurring at various heights in the atmosphere. We perform simulations of magnetic reconnection induced by… ▽ More The density decreases exponentially with height in the solar gravitationally stratified atmosphere, therefore the collisional coupling between the ionized plasma and the neutrals also decreases. Here, we investigate the role of collisions between ions and neutrals on the reconnection process occurring at various heights in the atmosphere. We perform simulations of magnetic reconnection induced by a localized resistivity in a gravitationally stratified atmosphere, where we vary the height of the initial reconnection X-point. We compare a magnetohydrodynamic (MHD) model and two two-fluid configurations: one where the collisional coupling is calculated from local plasma parameters and another where the coupling is decreased, so that collisional effects are enhanced. Simulations in a stratified atmosphere show similar structures in MHD and two-fluid simulations with strong coupling. However, when collisional effects are increased to attain representative parameter regimes, we find a nonlinear runaway instability, which separates the plasma-neutral densities across the current sheet (CS). With increased collisional effects, the initial decoupling in velocity heats the neutrals and this sets up a nonlinear feedback where neutrals migrate outside the CS, replacing charged particles which accumulate towards the center of the CS. The reconnection rate has a maximum value around 0.1, similar for both reconnection heights, and is consistent with the use of a localized enhanced resistivity used in all three models. The initial stages of plasmoid formation, observed near the end of our simulations, is influenced by the outflow from the primary reconnection point, rather than by collisions. We synthesize optically thin emission for both MHD and two-fluid models, which can show a very different evolution when the charged particle density is used instead of the total density. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Journal ref: A&A 678, A66 (2023)

Exploring the effects of numerical methods and slope limiters in heliospheric modeling

Authors: Tinatin Baratashvili, Christine Verbeke, Rony Keppens, Stefaan Poedts

Abstract: Coronal mass ejections (CMEs) are large eruptions close to the solar surface, where plasma is ejected outwards into space at large speeds. When directed towards Earth, they interfere with Earth's magnetic fields and cause strong geo-effective storms. In order to mitigate the potential damage, forecasting tools are implemented. Recently, a novel heliospheric modelling tool, Icarus, has been impleme… ▽ More Coronal mass ejections (CMEs) are large eruptions close to the solar surface, where plasma is ejected outwards into space at large speeds. When directed towards Earth, they interfere with Earth's magnetic fields and cause strong geo-effective storms. In order to mitigate the potential damage, forecasting tools are implemented. Recently, a novel heliospheric modelling tool, Icarus, has been implemented, which exploits the open-source framework MPI-AMRVAC as its core MHD solver. This new model efficiently performs 3D MHD simulations of the solar wind and the evolution of interplanetary CMEs with the help of advanced techniques, such as adaptive mesh refinement and gradual radial grid stretching. The numerical methods applied in the simulations can have significant effects on the simulation results and on the efficiency of the model. In this study, the effect of different combinations of numerical schemes and slope limiters, for reconstructing edge-based variabes used in fluxes, is considered. We explore frequently exploited combinations from the available numerical schemes in MPI-AMRVAC: TVDLF, HLL and HLLC along with the slope limiters 'woodward', 'minmod', 'vanleer', and 'koren'. For analysis purposes, we selected one particular solar wind configuration and studied the influence on variables at 1 AU in the equatorial plane. The goal is to find the optimal combination to produce accurate results fast and in a robust way so that the model can be reliable for day-to-day use by space weather scientists. As a conclusion, the best result assessed with these two criteria is the combination of the TVDLF scheme with the 'woodward' limiter. △ Less

Submitted 24 May, 2023; originally announced May 2023.

Comments: 17 pages, 9 figures, 4 tables, to appear in Sun and Geosphere

Winking filaments due to cyclic evaporation-condensation

Authors: Yuhao Zhou, Xiaohong Li, Jie Hong, Rony Keppens

Abstract: Observations have shown that some filaments appear and disappear in the H$α$ line wing images periodically. There have been no attempts to model these "winking filaments" thus far. The evaporation--condensation mechanism is widely used to explain the formation of solar filaments. Here, we demonstrate, for the first time, how multi-dimensional evaporation--condensation in an arcade setup invariably… ▽ More Observations have shown that some filaments appear and disappear in the H$α$ line wing images periodically. There have been no attempts to model these "winking filaments" thus far. The evaporation--condensation mechanism is widely used to explain the formation of solar filaments. Here, we demonstrate, for the first time, how multi-dimensional evaporation--condensation in an arcade setup invariably causes a stretching of the magnetic topology. We aim to check whether this magnetic stretching during cyclic evaporation--condensation could reproduce a winking filament. We used our open-source code MPI-AMRVAC to carry out 2D magnetohydrodynamic simulations based on a quadrupolar configuration. A periodic localized heating, which modulates the evaporation--condensation process, was imposed before, during, and after the formation of the filament. Synthetic H$α$ and 304 Å, images were produced to compare the results with observations. For the first time, we noticed the winking filament phenomenon in a simulation of the formation of on-disk solar filaments, which was in good agreement with observations. Typically, the period of the winking is different from the period of the impulsive heating. A forced oscillator model explains this difference and fits the results well. A parameter survey is also done to look into details of the magnetic stretching phenomenon. We found that the stronger the heating or the higher the layer where the heating occurs, the more significant the winking effect appears. △ Less

Submitted 22 May, 2023; originally announced May 2023.

Comments: 14 pages, 6 figures. Accepted by A&A

Multi-thermal jet formation triggered by flux emergence

Authors: Xiaohong Li, Rony Keppens, Yuhao Zhou

Abstract: Flux emergence is responsible for various solar eruptions. Combining observation and simulations, we investigate the influence of flux emergence at one footpoint of an arcade on coronal rain as well as induced eruptions. The emergence changes the pressure in the loops, and the internal coronal rain all moves to the other side. The emerging flux reconnects with the overlying magnetic field, forming… ▽ More Flux emergence is responsible for various solar eruptions. Combining observation and simulations, we investigate the influence of flux emergence at one footpoint of an arcade on coronal rain as well as induced eruptions. The emergence changes the pressure in the loops, and the internal coronal rain all moves to the other side. The emerging flux reconnects with the overlying magnetic field, forming a current sheet and magnetic islands. The plasma is ejected outwards and heated, forming a cool jet ~ 6000 K and a hot X-ray jet ~ 4 MK simultaneously. The jet dynamical properties agree very well between observation and simulation. In the simulation, the jet also displays transverse oscillations with a period of 8 minutes, a so-called whip-like motion. The movement of the jet and dense plasmoids changes the configuration of the local magnetic field, facilitating the occurrence of Kelvin--Helmholtz instability, and vortex-like structures form at the boundary of the jet. Our simulation clearly demonstrates the effect of emergence on coronal rain, the dynamical details of reconnecting plasmoid chains, the formation of multi-thermal jets, and the cycling of cool mass between the chromosphere and the corona. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 11 pages, 5 figures, accepted for publication in The Astrophysical Journal Letters

MPI-AMRVAC 3.0: updates to an open-source simulation framework

Authors: Rony Keppens, Beatrice Popescu Braileanu, Yuhao Zhou, Wenzhi Ruan, Chun Xia, Yang Guo, Niels Claes, Fabio Bacchini

Abstract: Computational astrophysics routinely combines grid-adaptive capabilities with modern shock-capturing, high resolution spatio-temporal schemes on multi-dimensional hydro- and magnetohydrodynamics. We provide an update on developments within the open-source MPI-AMRVAC code. With online documentation, the MPI-AMRVAC 3.0 release includes several added equation sets, and many options to explore and qua… ▽ More Computational astrophysics routinely combines grid-adaptive capabilities with modern shock-capturing, high resolution spatio-temporal schemes on multi-dimensional hydro- and magnetohydrodynamics. We provide an update on developments within the open-source MPI-AMRVAC code. With online documentation, the MPI-AMRVAC 3.0 release includes several added equation sets, and many options to explore and quantify the influence of implementation details. Showcasing this on a variety of hydro and MHD tests, we document new modules of interest for state-of-the-art solar applications. Test cases address how higher order reconstructions impact long term simulations of shear layers, with and without gas-dust coupling, how runaway radiative losses transit to intricate multi-temperature, multi-phase dynamics, and how different flavors of spatio-temporal schemes and magnetic monopole control produce consistent MHD results in combination with adaptive meshes. We demonstrate Super-Time-Step** strategies for specific parabolic terms and give details on all implemented Implicit-Explicit integrators. A new magnetofrictional module can be used for computing force-free magnetic fields or for data-driven time-dependent evolutions, while the Regularized-Biot-Savart-Law approach can insert fluxropes in 3D domains. Synthetic observations of 3D MHD simulations can be rendered on-the-fly, or in post-processing, in many spectral wavebands. A particle module and a generic fieldline tracing, compatible with the hierarchical meshes, can be used to sample information at prescribed locations, to follow dynamics of charged particles, or realize two-way coupled simulations between MHD setups and field-aligned non-thermal processes. Highlighting the latest additions and various technical aspects, our open-source strategy welcomes any further code usage, contribution, or spin-off development. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Comments: Accepted for A&A

Journal ref: A&A 673, A66 (2023)

Simulating Rayleigh-Taylor induced magnetohydrodynamic turbulence in prominences

Authors: Madhurjya Changmai, Jack M. Jenkins, J. -B. Durrive, Rony Keppens

Abstract: Solar prominences represent large-scale condensations suspended against gravity within the solar atmosphere. The Rayleigh-Taylor (RT) instability is proposed to be one of the important fundamental processes leading to the generation of dynamics at many spatial and temporal scales within these long-lived, cool, and dense structures amongst the solar corona. We run 2.5D ideal magnetohydrodynamic (MH… ▽ More Solar prominences represent large-scale condensations suspended against gravity within the solar atmosphere. The Rayleigh-Taylor (RT) instability is proposed to be one of the important fundamental processes leading to the generation of dynamics at many spatial and temporal scales within these long-lived, cool, and dense structures amongst the solar corona. We run 2.5D ideal magnetohydrodynamic (MHD) simulations with the open-source MPI-AMRVAC code far into the nonlinear evolution of an RT instability perturbed at the prominence-corona interface. Our simulation achieves a resolution down to $\sim 23$ km on a 2D $(x,y)$ domain of size 30 Mm $\times$ 30 Mm. We follow the instability transitioning from a multi-mode linear perturbation to its nonlinear, fully turbulent state. Over the succeeding $\sim 25$ minute period, we perform a statistical analysis of the prominence at a cadence of $\sim 0.858$ s. We find the dominant guiding $B_z$ component induces coherent structure formation predominantly in the vertical velocity $V_y$ component, consistent with observations, demonstrating an anisotropic turbulence state within our prominence. We find power-law scalings in the inertial range for the velocity, magnetic, and temperature fields. The presence of intermittency is evident from the probability density functions of the field fluctuations, which depart from Gaussianity as we consider smaller and smaller scales. In exact agreement, the higher-order structure functions quantify the multifractality, in addition to different scale characteristics and behavior between the longitudinal and transverse directions. Thus, the statistics remain consistent with the conclusions from previous observational studies, enabling us to directly relate the RT instability to the turbulent characteristics found within quiescent prominence. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: 21 pages, 17 figures, Accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 672, A152 (2023)

Estimating uncertainties in the back-map** of the fast solar wind

Authors: Alexandros Koukras, Laurent Dolla, Rony Keppens

Abstract: Solar wind back-map** is a combination of ballistic map** and magnetic map**. By examining the different model ingredients that can affect the derived back-mapped position, we aim to provide a more precise estimate of the source location and a measure of confidence in the map** procedure. This can be used to improve the connection of remote sensing with in situ measurements. For the ballis… ▽ More Solar wind back-map** is a combination of ballistic map** and magnetic map**. By examining the different model ingredients that can affect the derived back-mapped position, we aim to provide a more precise estimate of the source location and a measure of confidence in the map** procedure. This can be used to improve the connection of remote sensing with in situ measurements. For the ballistic map** we created custom velocity profiles. These profiles are constrained by observations of the fast solar wind close to the Sun and are used to examine the map** uncertainty. The coronal magnetic field topology from the solar surface up to the source surface is modeled with a PFSS extrapolation. The sensitivity of the extrapolated field is examined by adding noise to the input magnetogram and performing a Monte Carlo simulation, where for multiple noise realizations we calculate the source position of the solar wind. Next, the effect of free parameters, like the height of the source surface, is examined and statistical estimates are derived. We used Gaussian Mixture clustering to group the back-mapped points, due to different sources of uncertainty, and provide a confidence area for the source location of the solar wind. Furthermore, we computed a number of metrics to evaluate the back-map** results and assessed their statistical significance by examining 3 high speed stream events. Lastly, we explored the effect of corotation, close to the Sun, on the source region of the solar wind. Our results show that the height of the source surface produces the largest uncertainty in the source region of the fast solar wind, followed by the choice of the velocity profile and the noise in the input magnetogram. Additionally, we display the ability to derive a confidence area on the solar surface that represents the potential source region of the in-situ measured fast solar wind. △ Less

Submitted 22 December, 2022; originally announced December 2022.

Dynamic formation of multi-threaded prominences in arcade configurations

Authors: V. Jerčić, R. Keppens

Abstract: With this study, we aim to understand the nature of prominences, governed by their formation process. We use a state-of-the-art threaded prominence model within a dipped magnetic arcade. The non-ideal magnetohydrodynamic (MHD) equations are solved using the open-source MPI-AMRVAC MHD toolkit. Unlike many previous 1D models, we study the full 2D dynamics in a fixed-shaped arcade. This allows for si… ▽ More With this study, we aim to understand the nature of prominences, governed by their formation process. We use a state-of-the-art threaded prominence model within a dipped magnetic arcade. The non-ideal magnetohydrodynamic (MHD) equations are solved using the open-source MPI-AMRVAC MHD toolkit. Unlike many previous 1D models, we study the full 2D dynamics in a fixed-shaped arcade. This allows for sideways field deformations and cross-field thermodynamic coupling. To achieve a realistic setup we consider field-aligned thermal conduction, radiative cooling and heating, wherein the latter combines a steady background and a localized stochastic component. The stochastic component simulates energy pulses localized in time and space at the footpoints of the magnetic arcade. We vary the height and amplitude of the localized heating and observe how it influences the prominence, its threads, and its overall dynamics. We show the importance of random localized heating in the evolution of prominences and their threaded structure. Random heating strongly influences the morphology of the prominence threaded structure, the area, the mass the threads reach, their minimum temperature and their average density. More importantly, the strength of the localized heating plays a role in maintaining the balance between condensation and draining, affecting the general prominence stability. Stronger sources form condensations faster and result in larger and more massive prominences. We show how the condensation rates scale with the amplitude of the heating inputs and quantify how these rates match with values from observations. We detail how stochastic sources determine counterstreaming flows and oscillations of prominence threads. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Comments: 13 pages, 12 figures, accepted for publication

Journal ref: A&A 670, A64 (2023)

1.5D NLTE spectral synthesis of a 3D filament/prominence simulation

Authors: J. M. Jenkins, C. M. J. Osborne, R. Keppens

Abstract: Aims. We here demonstrate how the recently developed Lightweaver framework makes non-LTE (NLTE) spectral synthesis feasible on a new 3D ab-initio magnetohydrodynamic (MHD) filament/prominence simulation, in a post-processing step. Methods. We clarify the need to introduce filament/prominent-specific Lightweaver boundary conditions that accurately model incident chromospheric radiation, and include… ▽ More Aims. We here demonstrate how the recently developed Lightweaver framework makes non-LTE (NLTE) spectral synthesis feasible on a new 3D ab-initio magnetohydrodynamic (MHD) filament/prominence simulation, in a post-processing step. Methods. We clarify the need to introduce filament/prominent-specific Lightweaver boundary conditions that accurately model incident chromospheric radiation, and include a self-consistent and smoothly varying limb darkening function. Results. Progressing from isothermal/isobaric models to the self-consistently generated stratifications within a fully 3D MHD filament/prominence simulation, we find excellent agreement between our 1.5D non local thermodynamic equilibrium Lightweaver synthesis and a popular Hydrogen Hα proxy. We compute additional lines including Ca~\textsc{ii} 8542 alongside the more optically-thick Ca~\textsc{ii} H&K & Mg~\textsc{ii} h&k lines, for which no comparable proxy exists, and explore their formation properties within filament/prominence atmospheres. Conclusions. The versatility of the Lightweaver framework is demonstrated with this extension to 1.5D filament/prominence models, where each vertical column of the instantaneous 3D MHD state is spectrally analysed separately, without accounting for (important) multi-dimensional radiative effects. The general agreement found in the line core contrast of both observations and the Lightweaver-synthesised simulation further validates the current generation of solar filaments/prominences models constructed numerically with MPI-AMRVAC. △ Less

Submitted 27 November, 2022; originally announced November 2022.

Comments: 16+2 pages with appendix, 12+1 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 670, A179 (2023)

Modelling the magnetic structure of a large-scale horse-shoe-like filament in a decaying and diffuse active region

Authors: Kaifeng Kang, Yang Guo, Ilia I. Roussev, Rony Keppens, Jun Lin

Abstract: A large-scale, horse-shoe-like filament was investigated and the magnetic field around it was reconstructed. This is an intermediate filament (IF) that appeared on the solar disk for the first time at 02:00 UT on 2015 November 7, and took 8 days to move to the central median on the solar disk. The active region AR 12452 around which the filament occurred was diffuse so that the magnetic field near… ▽ More A large-scale, horse-shoe-like filament was investigated and the magnetic field around it was reconstructed. This is an intermediate filament (IF) that appeared on the solar disk for the first time at 02:00 UT on 2015 November 7, and took 8 days to move to the central median on the solar disk. The active region AR 12452 around which the filament occurred was diffuse so that the magnetic field nearby was weak, the average field strength is 106 G. Therefore, the existing approaches to extrapolating the coronal magnetic field and to constructing the filament configuration in the region with strong background field do not work well here. On the basis of the regularized Biot-Savart laws method, we successfully constructed a data-constrained, non-linear force-free field configuration for this IF observed on 2015 November 14. The overall IF configuration obtained in this way matches well the morphology suggested by a 304~Å\ image taken by the Atmospheric Imaging Assembly on board Solar Dynamics Observatory. Magnetic dips in the configuration were coincident in space with the H$α$ features of the filament, which is lower in altitude than the features seen in 304~Å. This suggests that the cold plasma fills the lower part of the filament, and hot plasma is situated in the higher region. A quasi-separatrix layer wraps the filament, and both the magnetic field and the electric current are stronger near the inner edge of the filament. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Comments: 17 pages,14 figures,1 table

Effective resistivity in relativistic collisionless plasmoid-mediated reconnection

Authors: Sebastiaan Selvi, Oliver Porth, Bart Ripperda, Fabio Bacchini, Lorenzo Sironi, Rony Keppens

Abstract: Magnetic reconnection can power spectacular high-energy astrophysical phenomena by producing non-thermal energy distributions in highly magnetized regions around compact objects. By means of two-dimensional fully kinetic particle-in-cell (PIC) simulations we investigate relativistic collisionless plasmoid-mediated reconnection in magnetically dominated pair plasmas with and without guide field. In… ▽ More Magnetic reconnection can power spectacular high-energy astrophysical phenomena by producing non-thermal energy distributions in highly magnetized regions around compact objects. By means of two-dimensional fully kinetic particle-in-cell (PIC) simulations we investigate relativistic collisionless plasmoid-mediated reconnection in magnetically dominated pair plasmas with and without guide field. In X-points, where diverging flows result in a non-diagonal thermal pressure tensor, a finite residence time for particles gives rise to a localized collisionless effective resistivity. Here, for the first time for relativistic reconnection in a fully developed plasmoid chain we identify the mechanisms driving the non-ideal electric field using a full Ohm's law by means of a statistical analysis based on our PIC simulations. We show that the non-ideal electric field is predominantly driven by gradients of nongyrotropic thermal pressures. We propose a kinetic physics motivated non-uniform effective resistivity model, which is negligible on global scales and becomes significant only locally in X-points, that captures the properties of collisionless reconnection with the aim of mimicking its essentials in non-ideal magnetohydrodynamic descriptions. This effective resistivity model provides a viable opportunity to design physically grounded global models for reconnection-powered high-energy emission. △ Less

Submitted 8 November, 2022; originally announced November 2022.

Comments: 12 pages, 4 figures

The influence of flux rope heating models on solar prominence formation

Authors: N. Brughmans, J. M. Jenkins, R. Keppens

Abstract: Aims. We begin by exploring the influence of two classes of commonly adopted heating models on the formation behaviour of solar prominences. These models consider either an exponential variation dependent on height alone, or local density and magnetic field conditions. We highlight and address some of the limitations inherent to these early approximations by proposing a new, dynamic 2D flux rope h… ▽ More Aims. We begin by exploring the influence of two classes of commonly adopted heating models on the formation behaviour of solar prominences. These models consider either an exponential variation dependent on height alone, or local density and magnetic field conditions. We highlight and address some of the limitations inherent to these early approximations by proposing a new, dynamic 2D flux rope heating model that qualitatively accounts for the 3D topology of the twisted flux rope field. Methods. We performed 2.5D grid-adaptive numerical simulations of prominence formation via the levitation-condensation mechanism. A linear force-free arcade is subjected to shearing and converging motions, leading to the formation of a flux rope containing material that may succumb to thermal instability. The eventual formation and subsequent evolution of prominence condensations was then quantified as a function of the specific background heating prescription adopted. For the simulations that consider the topology of the flux rope, reduced heating was considered within a dynamically evolving ellipse that traces the flux rope cross-section. This ellipse is centred on the flux rope axis and tracked during runtime using an approach based on the instantaneous magnetic field curvature. Results. We find that the nature of the heating model is clearly imprinted on the evolution and morphology of any resulting prominences: one large, low-altitude condensation is obtained for the heating model based on local parameters, while the exponential model leads to the additional formation of smaller blobs throughout the flux rope which then relocate as they tend towards achieving hydrostatic equilibrium. Finally, a study of the condensation process in phase space reveals a non-isobaric evolution with an eventual recovery of uniform pressure balance along flux surfaces. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 19 pages, 12 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 668, A47 (2022)

MHD turbulence formation in solar flares: 3D simulation and synthetic observations

Authors: Wenzhi Ruan, Limei Yan, Rony Keppens

Abstract: Turbulent plasma motion is common in the universe, and invoked in solar flares to drive effective acceleration leading to high energy electrons. Unresolved mass motions are frequently detected in flares from extreme ultraviolet (EUV) observations, which are often regarded as turbulence. However, how this plasma turbulence forms during the flare is still largely a mystery. Here we successfully repr… ▽ More Turbulent plasma motion is common in the universe, and invoked in solar flares to drive effective acceleration leading to high energy electrons. Unresolved mass motions are frequently detected in flares from extreme ultraviolet (EUV) observations, which are often regarded as turbulence. However, how this plasma turbulence forms during the flare is still largely a mystery. Here we successfully reproduce observed turbulence in our 3D magnetohydrodynamic simulation where the magnetic reconnection process is included. The turbulence forms as a result of an intricate non-linear interaction between the reconnection outflows and the magnetic arcades below the reconnection site, in which the shear-flow driven Kelvin-Helmholtz Instability (KHI) plays a key role for generating turbulent vortices. The turbulence is produced above high density flare loops, and then propagates to chromospheric footpoints along the magnetic field as Alfvenic perturbations. High turbulent velocities above 200 km s^-1 can be found around the termination shock, while the low atmosphere reaches turbulent velocities of 10 km s^-1 at a layer where the number density is about 10^11 cm^-3. The turbulent region with maximum non-thermal velocity coincides with the region where the observed high-energy electrons are concentrated, demonstrating the potential role of turbulence in acceleration. Synthetic views in EUV and fitted Hinode-EIS spectra show excellent agreement with observational results. An energy analysis demonstrates that more than 10% of the reconnection downflow kinetic energy can be converted to turbulent energy via KHI. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Thermally enhanced tearing in solar current sheets: explosive reconnection with plasmoid-trapped condensations

Authors: Samrat Sen, Rony Keppens

Abstract: In flare-relevant current sheets, tearing instability may trigger explosive reconnection and plasmoid formation. We explore how the thermal and tearing modes reinforce each other in the fragmentation of a current sheet in the solar corona through an explosive reconnection process, characterized by the formation of plasmoids which interact and trap condensing plasma. We use a resistive magnetohydro… ▽ More In flare-relevant current sheets, tearing instability may trigger explosive reconnection and plasmoid formation. We explore how the thermal and tearing modes reinforce each other in the fragmentation of a current sheet in the solar corona through an explosive reconnection process, characterized by the formation of plasmoids which interact and trap condensing plasma. We use a resistive magnetohydrodynamic (MHD) simulation of a 2D current layer, incorporating the non-adiabatic effects of optically thin radiative energy loss and background heating using \texttt{MPI-AMRVAC}. Our parametric survey explores different resistivities and plasma-$β$ to quantify the instability growth rate in the linear and nonlinear regimes. We notice that for dimensionless resistivity values within $10^{-4} - 5 \times 10^{-3}$, we get explosive behavior where thermal instability and tearing behavior reinforce each other. This is clearly below the usual critical Lundquist number range of pure resistive explosive plasmoid formation. The non-linear growth rates follow weak power-law dependency with resistivity. The fragmentation of the current sheet and the formation of the plasmoids in the nonlinear phase of the evolution due to the thermal and tearing instabilities are obtained. The formation of plasmoids is noticed for the Lundquist number ($S_L$) range $4.6 \times 10^3 - 2.34 \times 10^5$. We quantify the temporal variation of the plasmoid numbers and the density filling factor of the plasmoids for different physical conditions. We also find that the maximum plasmoid numbers scale as $S_L^{0.223}$. Within the nonlinearly coalescing plasmoid chains, localized cool condensations gather, realizing density and temperature contrasts similar to coronal rain or prominences. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Comments: Accepted for publication in the Astronomy and Astrophysics journal

Journal ref: A&A 666, A28 (2022)

BxC: a swift generator for 3D magnetohydrodynamic turbulence

Authors: J. -B. Durrive, M. Changmai, R. Keppens, P. Lesaffre, D. Maci, G. Momferatos

Abstract: Magnetohydrodynamic turbulence is central to laboratory and astrophysical plasmas, and is invoked for interpreting many observed scalings. Verifying predicted scaling law behaviour requires extreme-resolution direct numerical simulations (DNS), with needed computing resources excluding systematic parameter surveys. We here present an analytic generator of realistically looking turbulent magnetic f… ▽ More Magnetohydrodynamic turbulence is central to laboratory and astrophysical plasmas, and is invoked for interpreting many observed scalings. Verifying predicted scaling law behaviour requires extreme-resolution direct numerical simulations (DNS), with needed computing resources excluding systematic parameter surveys. We here present an analytic generator of realistically looking turbulent magnetic fields, that computes 3D ${\cal{O}}(1000^3)$ solenoidal vector fields in minutes to hours on desktops. Our model is inspired by recent developments in 3D incompressible fluid turbulence theory, where a Gaussian white noise vector subjected to a non-linear transformation results in an intermittent, multifractal random field. Our $B\times C$ model has only few parameters that have clear geometric interpretations. We directly compare a (costly) DNS with a swiftly $B\times C$-generated realization, in terms of its (i) characteristic sheet-like structures of current density, (ii) volume-filling aspects across current intensity, (iii) power-spectral behaviour, (iv) probability distribution functions of increments for magnetic field and current density, structure functions, spectra of exponents, and (v) partial variance of increments. The model even allows to mimic time-evolving magnetic and current density distributions and can be used for synthetic observations on 3D turbulent data cubes. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Comments: 18 pages, 14 figures, Accepted for publication in Physical Review E

Legolas: magnetohydrodynamic spectroscopy with viscosity and Hall current

Authors: Jordi De Jonghe, Niels Claes, Rony Keppens

Abstract: Many linear stability aspects in plasmas are heavily influenced by non-ideal effects beyond the basic ideal magnetohydrodynamics (MHD) description. Here, the extension of the modern open-source MHD spectroscopy code Legolas with viscosity and the Hall current is highlighted and benchmarked on a stringent set of historic and recent findings. The viscosity extension is demonstrated in a cylindrical… ▽ More Many linear stability aspects in plasmas are heavily influenced by non-ideal effects beyond the basic ideal magnetohydrodynamics (MHD) description. Here, the extension of the modern open-source MHD spectroscopy code Legolas with viscosity and the Hall current is highlighted and benchmarked on a stringent set of historic and recent findings. The viscosity extension is demonstrated in a cylindrical setup featuring Taylor-Couette flow and in a viscoresistive plasma slab with a tearing mode. For the Hall extension, we show how the full eigenmode spectrum relates to the analytic dispersion relation in an infinite homogeneous medium. We quantify the Hall term influence on the resistive tearing mode in a Harris current sheet, including the effect of compressibility, which is absent in earlier studies. Furthermore, we illustrate how Legolas mimics the incompressible limit easily to compare to literature results. Going beyond published findings, we emphasise the importance of computing the full eigenmode spectrum, and how elements of the spectrum are modified by compressibility. These extensions allow for future stability studies with Legolas that are relevant to ongoing dynamo experiments, protoplanetary disks, or magnetic reconnection. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Comments: 24 pages, 9 figures

Two-fluid implementation in MPI-AMRVAC, with applications in the solar chromosphere

Authors: B. Popescu Braileanu, R. Keppens

Abstract: The chromosphere is a partially ionized layer of the solar atmosphere, the transition between the photosphere where the gas is almost neutral and the fully ionized corona. As the collisional coupling between neutral and charged particles decreases in the upper part of the chromosphere, the hydrodynamical timescales may become comparable to the collisional timescale, and a two-fluid model is needed… ▽ More The chromosphere is a partially ionized layer of the solar atmosphere, the transition between the photosphere where the gas is almost neutral and the fully ionized corona. As the collisional coupling between neutral and charged particles decreases in the upper part of the chromosphere, the hydrodynamical timescales may become comparable to the collisional timescale, and a two-fluid model is needed. In this paper we describe the implementation and validation of a two-fluid model which simultaneously evolves charges and neutrals, coupled by collisions. The two-fluid equations are implemented in the fully open-source MPI-AMRVAC code. In the photosphere and the lower part of the solar atmosphere, where collisions between charged and neutral particles are very frequent, an explicit time-marching would be too restrictive, since for stability the timestep needs to be proportional to the inverse of the collision frequency. This is overcome by evaluating the collisional terms implicitly using an explicit-implicit (IMEX) scheme. The cases presented cover very different collisional regimes and our results are fully consistent with related literature findings. If collisional time and length scales are smaller than the hydrodynamical scales usually considered in the solar chromosphere, density structures seen in the neutral and charged fluids are similar, with the effect of elastic collisions between charges and neutrals being similar to diffusivity. Otherwise, density structures are different and the decoupling in velocity between the two species increases. The use of IMEX schemes efficiently avoids the small timestep constraints of fully explicit implementations in strongly collisional regimes. Adaptive Mesh Refinement (AMR) greatly decreases the computational cost, compared to uniform grid runs at the same effective resolution. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: accepted for publication in A&A

Journal ref: A&A 664, A55 (2022)

Plasmoid-fed prominence formation (PF$^2$) during flux rope eruption

Authors: Xiaozhou Zhao, Rony Keppens

Abstract: We report a new, plasmoid-fed scenario for the formation of an eruptive prominence (PF$^2$), involving reconnection and condensation. We use grid-adaptive resistive two-and-a-half-dimensional magnetohydrodynamic (MHD) simulations in a chromosphere-to-corona setup to resolve this plasmoid-fed scenario. We study a pre-existing flux rope (FR) in the low corona that suddenly erupts due to catastrophe,… ▽ More We report a new, plasmoid-fed scenario for the formation of an eruptive prominence (PF$^2$), involving reconnection and condensation. We use grid-adaptive resistive two-and-a-half-dimensional magnetohydrodynamic (MHD) simulations in a chromosphere-to-corona setup to resolve this plasmoid-fed scenario. We study a pre-existing flux rope (FR) in the low corona that suddenly erupts due to catastrophe, which also drives a fast shock above the erupting FR. A current sheet (CS) forms underneath the erupting FR, with chromospheric matter squeezed into it. The plasmoid instability occurs and multiple magnetic islands appear in the CS once the Lundquist number reaches $\sim 3.5\times 10^{4}$. The remnant chromospheric matter in the CS is then transferred to the FR by these newly formed magnetic islands. The dense and cool mass transported by the islands accumulates in the bottom of the FR, thereby forming a prominence during the eruption phase. More coronal plasma continuously condenses into the prominence due to the thermal instability as the FR rises. Due to the fine structure brought in by the PF$^2$ process, the model naturally forms filament threads, aligned above the polarity inversion line. Synthetic views at our resolution of $15 \mathrm{km}$ show many details that may be verified in future high-resolution observations. △ Less

Submitted 16 February, 2022; originally announced February 2022.

Comments: 15 pages,9 figures, to be published in ApJ

The Super-Alfvénic Rotational Instability in accretion disks about black holes

Authors: Hans Goedbloed, Rony Keppens

Abstract: The theory of instability of accretion disks about black holes, neutron stars or proto-planets, is revisited by means of the recent method of the Spectral Web. The cylindrical accretion disk differential equation is shown to be governed by the forward and backward Doppler-shifted continuous Alfvén spectra $Ω_{\rm A}^\pm \equiv m Ω\pm ω_{\rm A}$, where $ω_{\rm A}$ is the static Alfvén frequency. It… ▽ More The theory of instability of accretion disks about black holes, neutron stars or proto-planets, is revisited by means of the recent method of the Spectral Web. The cylindrical accretion disk differential equation is shown to be governed by the forward and backward Doppler-shifted continuous Alfvén spectra $Ω_{\rm A}^\pm \equiv m Ω\pm ω_{\rm A}$, where $ω_{\rm A}$ is the static Alfvén frequency. It is crucial to take non-axisymmetry ($m \ne 0$) and super-Alfvénic rotation of the Doppler frames ($|mΩ| \gg |ω_{\rm A}|$) into account. The continua $Ω_{\rm A}^+$ and $Ω_{\rm A}^-$ then overlap, ejecting a plethora of Super-Alfvénic Rotational Instabilities (SARIs). In-depth analysis for small inhomogeneity shows that the two Alfvén singularities reduce the extent of the modes to sizes much smaller than the width of the accretion disk. Generalization for large inhomogeneity leads to the completely unprecedented result that, for mode numbers $|k| \gg |m|$, any complex $ω$ in a wide neighborhood of the real axis is an approximate `eigenvalue'. The difference with genuine eigenmodes is that the amount of complementary energy to excite the modes is tiny, $|W_{\rm com}| \le c$, with $c$ the machine accuracy of the computation. This yields a multitude of two-dimensional continua of quasi-discrete modes: quasi-continuum SARIs. We conjecture that the onset of 3D turbulence in magnetized accretion disks is governed, not by the excitation of discrete axisymmetric Magneto-Rotational Instabilities, but by the excitation of modes from these two-dimensional continua of quasi-discrete non-axisymmetric Super-Alfvénic Rotational Instabilities. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Comments: accepted for publication in ApJ Supplement Series

Three-dimensional MHD wave propagation near a coronal null point: a new wave mode decomposition approach

Authors: N. Yadav, Rony Keppens, B. Popescu Braileanu

Abstract: We present a new MHD wave decomposition method that overcomes the limitations of existing wave identification methods. Our method allows to investigate the energy fluxes in different MHD modes at different locations of the solar atmosphere as waves generated by vortex flows travel through the solar atmosphere and pass near the magnetic null. We simulate wave dynamics through a coronal null configu… ▽ More We present a new MHD wave decomposition method that overcomes the limitations of existing wave identification methods. Our method allows to investigate the energy fluxes in different MHD modes at different locations of the solar atmosphere as waves generated by vortex flows travel through the solar atmosphere and pass near the magnetic null. We simulate wave dynamics through a coronal null configuration and apply a rotational wave driver at our bottom photospheric boundary. To identify the wave energy fluxes associated with different MHD wave modes, we employ a wave-decomposition method that is able to uniquely distinguish different MHD modes. Our proposed method utilizes the geometry of an individual magnetic field-line in 3D space to separate out velocity perturbations associated with the three fundamental MHD waves. Our method for wave identification is consistent with previous flux-surface-based methods and gives expected results in terms of wave energy fluxes at various locations of the null configuration. We show that ubiquitous vortex flows excite MHD waves that contribute significantly to the Poynting flux in the solar corona. Alfvén wave energy flux accumulates on the fan surface and fast wave energy flux accumulates near the null point. There is a strong current density buildup at the spine and fan surface.The proposed method has advantages over previously utilized wave decomposition methods, since it may be employed in realistic simulations or magnetic extrapolations, as well as in real solar observations, whenever the 3D fieldline shape is known. The enhancement in energy flux associated with magneto-acoustic waves near nulls may have important implications in the formation of jets and impulsive plasma flows. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: Accepted for publication in A&A

Journal ref: A&A 660, A21 (2022)

Coronal rain in randomly heated arcades

Authors: Xiaohong Li, Rony Keppens, Yuhao Zhou

Abstract: Adopting the MPI-AMRVAC code, we present a 2.5-dimensional magnetohydrodynamic (MHD) simulation, which includes thermal conduction and radiative cooling, to investigate the formation and evolution of the coronal rain phenomenon. We perform the simulation in initially linear force-free magnetic fields which host chromospheric, transition region, and coronal plasma, with turbulent heating localized… ▽ More Adopting the MPI-AMRVAC code, we present a 2.5-dimensional magnetohydrodynamic (MHD) simulation, which includes thermal conduction and radiative cooling, to investigate the formation and evolution of the coronal rain phenomenon. We perform the simulation in initially linear force-free magnetic fields which host chromospheric, transition region, and coronal plasma, with turbulent heating localized on their footpoints. Due to thermal instability, condensations start to occur at the loop top, and rebound shocks are generated by the siphon inflows. Condensations fragment into smaller blobs moving downwards and as they hit the lower atmosphere, concurrent upflows are triggered. Larger clumps show us clear "coronal rain showers" as dark structures in synthetic EUV hot channels and bright blobs with cool cores in the 304 Å channel, well resembling real observations. Following coronal rain dynamics for more than 10 hours, we carry out a statistical study of all coronal rain blobs to quantify their widths, lengths, areas, velocity distributions, and other properties. The coronal rain shows us continuous heating-condensation cycles, as well as cycles in EUV emissions. Compared to previous studies adopting steady heating, the rain happens faster and in more erratic cycles. Although most blobs are falling downward, upward-moving blobs exist at basically every moment. We also track the movement of individual blobs to study their dynamics and the forces driving their movements. The blobs have a prominence-corona transition-region-like structure surrounding them, and their movements are dominated by the pressure evolution in the very dynamic loop system. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Comments: 23 pages, 15 figures, accepted by ApJ

Multi-threaded prominence oscillations triggered by a coronal shock wave

Authors: V. Jerčić, R. Keppens, Y. Zhou

Abstract: In this work, we study the causal relations between a localised energy release and a remote prominence oscillation, where the prominence has a realistic thread-like structure. We used an open source magnetohydrodynamic (MHD) code known as MPI-AMRVAC to create a multithreaded prominence body. We introduced an additional energy source from which a shock wave originates, thereby inducing prominence o… ▽ More In this work, we study the causal relations between a localised energy release and a remote prominence oscillation, where the prominence has a realistic thread-like structure. We used an open source magnetohydrodynamic (MHD) code known as MPI-AMRVAC to create a multithreaded prominence body. We introduced an additional energy source from which a shock wave originates, thereby inducing prominence oscillation. We studied two cases with different source amplitudes to analyze its effect on the oscillations. Our results show that the frequently used pendulum model does not suffice to fully estimate the period of the prominence oscillation, in addition to showing that the influence of the source and the thread-like prominence structure needs to be taken into account. Repeated reflections and transmissions of the initial shock wave occur at the specific locations of multiple high-temperature and high-density gradients in the domain. This includes the left and right transition region (TR) located at the footpoints of the magnetic arcade, as well as the various transition regions between the prominence and the corona (PCTR). This results in numerous interferences of compressional waves. They contribute to the restoring forces of the oscillation, causing the period to deviate from the expected pendulum model, in addition to leading to differences in attributed dam** or even growth in amplitude between the various threads. Along with the global longitudinal motion that result from the shock impact, small-scale transverse oscillations are also evident. Multiple high-frequency oscillations represent the propagation of magnetoacoustic waves. The dam** we see is linked to the conversion of energy and its exchange with the surrounding corona. Our simulations demonstrate the exchange of energy between different threads and their different modes of oscillation. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Comments: 13 pages, 11 figures, accepted for publication

Journal ref: A&A 658, A58 (2022)

When hot meets cold: post-flare coronal rain

Authors: Wenzhi Ruan, Yuhao Zhou, Rony Keppens

Abstract: Most solar flares demonstrate a prolonged, hourlong post-flare (or gradual) phase, characterized by arcade-like, post-flare loops (PFLs) visible in many extreme ultraviolet (EUV) passbands. These coronal loops are filled with hot -- $\sim 30 \,\mathrm{MK}$ -- and dense plasma, evaporated from the chromosphere during the impulsive phase of the flare, and they very gradually recover to normal corona… ▽ More Most solar flares demonstrate a prolonged, hourlong post-flare (or gradual) phase, characterized by arcade-like, post-flare loops (PFLs) visible in many extreme ultraviolet (EUV) passbands. These coronal loops are filled with hot -- $\sim 30 \,\mathrm{MK}$ -- and dense plasma, evaporated from the chromosphere during the impulsive phase of the flare, and they very gradually recover to normal coronal density and temperature conditions. During this gradual cooling down to $\sim 1 \,\mathrm{MK}$ regimes, much cooler -- $\sim 0.01 \,\mathrm{MK}$ -- and denser coronal rain is frequently observed inside PFLs. Understanding PFL dynamics in this long-duration, gradual phase is crucial to the entire corona-chromosphere mass and energy cycle. Here we report a simulation in which a solar flare evolves from pre-flare, over impulsive phase all the way into its gradual phase, which successfully reproduces post-flare coronal rain. This rain results from catastrophic cooling caused by thermal instability, and we analyse the entire mass and energy budget evolution driving this sudden condensation phenomenon. We find that the runaway cooling and rain formation also induces the appearance of dark post-flare loop systems, as observed in EUV channels. We confirm and augment earlier observational findings, suggesting that thermal conduction and radiative losses alternately dominate the cooling of PFLs. △ Less

Submitted 24 September, 2021; originally announced September 2021.

Comments: accepted by ApJL

Magnetic Island Merging: Two-dimensional MHD Simulation and Test-Particle Modeling

Authors: Xiaozhou Zhao, Fabio Bacchini, Rony Keppens

Abstract: In an idealized system where four current channels interact in a two-dimensional periodic setting, we follow the detailed evolution of current sheets (CSs) forming in between the channels, as a result of a large-scale merging. A central X-point collapses and a gradually extending CS marks the site of continuous magnetic reconnection. Using grid-adaptive, non-relativistic, resistive magnetohydrodyn… ▽ More In an idealized system where four current channels interact in a two-dimensional periodic setting, we follow the detailed evolution of current sheets (CSs) forming in between the channels, as a result of a large-scale merging. A central X-point collapses and a gradually extending CS marks the site of continuous magnetic reconnection. Using grid-adaptive, non-relativistic, resistive magnetohydrodynamic (MHD) simulations, we establish that slow, near-steady Sweet-Parker reconnection transits to a chaotic, multi-plasmoid fragmented state, when the Lundquist number exceeds about ten to the fourth power, well in the range of previous studies on plasmoid instability. The extreme resolution employed in the MHD study shows significant magnetic island substructures. With relativistic test-particle simulations, we explore how charged particles can be accelerated in the vicinity of an O-point, either at embedded tiny-islands within larger "monster"-islands or near the centers of monster-islands. While the planar MHD setting artificially causes strong acceleration in the ignored third direction, it also allows for the full analytic study of all aspects leading to the acceleration and the in-plane-projected trap** of particles in the vicinities of O-points. Our analytic approach uses a decomposition of the particle velocity in slow- and fast-changing components, akin to the Reynolds decomposition in turbulence studies. Our analytic description is validated with several representative test-particle simulations. We find that after an initial non-relativistic motion throughout a monster island, particles can experience acceleration in the vicinity of an O-point beyond 0.7c, at which speed the acceleration is at its highest efficiency △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 27 pages, 13 figures, to be published in Physics of Plasmas

Magnetohydrodynamic spectroscopy of a non-adiabatic solar atmosphere

Authors: Niels Claes, Rony Keppens

Abstract: The quantification of all possible waves and instabilities in a given system is of paramount importance, and knowledge of the full magnetohydrodynamic (MHD) spectrum allows one to predict the (in)stability of a given equilibrium state. This is highly relevant in many (astro)physical disciplines, and when applied to the solar atmosphere it may yield various new insights in processes like prominence… ▽ More The quantification of all possible waves and instabilities in a given system is of paramount importance, and knowledge of the full magnetohydrodynamic (MHD) spectrum allows one to predict the (in)stability of a given equilibrium state. This is highly relevant in many (astro)physical disciplines, and when applied to the solar atmosphere it may yield various new insights in processes like prominence formation and coronal loop oscillations. In this work we present a detailed, high-resolution spectroscopic study of the solar atmosphere, where we use our newly developed Legolas code to calculate the full spectrum with corresponding eigenfunctions of equilibrium configurations that are based on fully realistic solar atmospheric models, including gravity, optically thin radiative losses and thermal conduction. Special attention is given to thermal instabilities, known to be responsible for the formation of prominences, together with a new outlook on the thermal and slow continua and how they behave in different chromospheric and coronal regions. We show that thermal instabilities are unavoidable in our solar atmospheric models and that there exist certain regions where both the thermal, slow and fast modes all have unstable wave mode solutions. We also encounter regions where the slow and thermal continua become purely imaginary and merge on the imaginary axis. The spectra discussed in this work illustrate clearly that thermal instabilities (both discrete and continuum modes) and magneto-thermal overstable propagating modes are ubiquitous throughout the solar atmosphere, and may well be responsible for much of the observed fine-structuring and multi-thermal dynamics. △ Less

Submitted 21 August, 2021; originally announced August 2021.

Comments: Accepted in Solar Physics

Effect of optically thin cooling curves on condensation formation: Case study using thermal instability

Authors: Joris Hermans, Rony Keppens

Abstract: Non-gravitationally induced condensations are observed in many astrophysical environments. Such structures are formed due to energy loss by optically thin radiative emission. Instead of solving the full radiative transfer equations, precomputed cooling curves are typically used in numerical simulations. In the literature, there exists a wide variety of cooling curves and they are quite often used… ▽ More Non-gravitationally induced condensations are observed in many astrophysical environments. Such structures are formed due to energy loss by optically thin radiative emission. Instead of solving the full radiative transfer equations, precomputed cooling curves are typically used in numerical simulations. In the literature, there exists a wide variety of cooling curves and they are quite often used as unquestionable ingredients. We determine the effect of the optically thin cooling curves on the formation and evolution of condensations. We perform a case study using thermal instability as a mechanism to form in situ condensations. We compare 2D numerical simulations with different cooling curves using interacting slow magnetohydrodynamic (MHD) waves as trigger for the thermal instability. Furthermore, we discuss a bootstrap measure to investigate the far non-linear regime of thermal instability. In the appendix, we include the details of all cooling curves implemented in MPI-AMRVAC and briefly discuss a hydrodynamic variant of the slow MHD waves setup for thermal instability. For all tested cooling curves, condensations are formed. However, the growth rates of the thermal instability are different. Also, the morphology of the formed condensation widely varies. We find fragmentation that is affected by the low-temperature treatment of the cooling curves. Condensations formed using cooling curves that vanish for temperatures lower than 20 000 K seem to be more stable against dynamical instabilities. The non-linear regime and fragmentation in the hydrodynamic case differ greatly from the MHD case. We advocate the use of modern cooling curves, based on accurate computations and up-to-date atomic parameters and solar abundances. Our bootstrap procedure can be used in future multi-dimensional simulations, to study fine-structure dynamics in solar prominences. △ Less

Submitted 2 August, 2021; v1 submitted 15 July, 2021; originally announced July 2021.

Comments: 20 pages, 21 figures, accepted for publication, corrections by language editor and improved quality of figures

Journal ref: A&A 655, A36 (2021)

Data-constrained Magnetohydrodynamic Simulation of a Long Duration Eruptive Flare

Authors: Yang Guo, Ze Zhong, M. D. Ding, P. F. Chen, Chun Xia, Rony Keppens

Abstract: We perform a zero-$β$ magnetohydrodynamic simulation for the C7.7 class flare initiated at 01:18 UT on 2011 June 21 using the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC). The initial condition for the simulation involves a flux rope which we realize through the regularized Biot-Savart laws, whose parameters are constrained by observations from the Atmos… ▽ More We perform a zero-$β$ magnetohydrodynamic simulation for the C7.7 class flare initiated at 01:18 UT on 2011 June 21 using the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC). The initial condition for the simulation involves a flux rope which we realize through the regularized Biot-Savart laws, whose parameters are constrained by observations from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) and the Extreme Ultraviolet Imager (EUVI) on the twin Solar Terrestrial Relations Observatory (STEREO). This data-constrained initial state is then relaxed to a force-free state by the magneto-frictional module in MPI-AMRVAC. The further time-evolving simulation results reproduce the eruption characteristics obtained by SDO/AIA 94 A, 304 A, and STEREO/EUVI 304 A observations fairly well. The simulated flux rope possesses similar eruption direction, height range, and velocities to the observations. Especially, the two phases of slow evolution and fast eruption are reproduced by varying the density distribution in light of the filament material draining process. Our data-constrained simulations also show other advantages, such as a large field of view (about 0.76 solar radii). We study the twist of the magnetic flux rope and the decay index of the overlying field, and find that in this event, both the magnetic strap** force and the magnetic tension force are sufficiently weaker than the magnetic hoop force, thus allowing the successful eruption of the flux rope. We also find that the anomalous resistivity is necessary in kee** the correct morphology of the erupting flux rope. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 25 pages, 7 figures, 1 table, accepted by ApJ