-
Optimizing the spin sensitivity of grain boundary junction nanoSQUIDs -- towards detection of small spin systems with single-spin resolution
Authors:
Roman Wölbing,
Tobias Schwarz,
Benedikt Müller,
Joachim Nagel,
Matthias Kemmler,
Reinhold Kleiner,
Dieter Koelle
Abstract:
We present an optimization study of the spin sensitivity of nanoSQUIDs based on resistively shunted grain boundary Josephson junctions. In addition the dc SQUIDs contain a narrow constriction onto which a small magnetic particle can be placed (with its magnetic moment in the plane of the SQUID loop and perpendicular to the grain boundary) for efficient coupling of its stray magnetic field to the S…
▽ More
We present an optimization study of the spin sensitivity of nanoSQUIDs based on resistively shunted grain boundary Josephson junctions. In addition the dc SQUIDs contain a narrow constriction onto which a small magnetic particle can be placed (with its magnetic moment in the plane of the SQUID loop and perpendicular to the grain boundary) for efficient coupling of its stray magnetic field to the SQUID loop. The separation of the location of optimum coupling from the junctions allows for an independent optimization of the coupling factor $φ_μ$ and junction properties. We present different methods for calculating $φ_μ$ (for a magnetic nanoparticle placed 10\,nm above the constriction) as a function of device geometry and show that those yield consistent results. Furthermore, by numerical simulations we obtain a general expression for the dependence of the SQUID inductance on geometrical parameters of our devices, which allows to estimate their impact on the spectral density of flux noise $S_Φ$ of the SQUIDs in the thermal white noise regime. Our analysis of the dependence of $S_Φ$ and $φ_μ$ on the geometric parameters of the SQUID layout yields a spin sensitivity $S_μ^{1/2}=S_Φ^{1/2}/φ_μ$ of a few $μ_{\rm{B}}/\rm{Hz^{1/2}}$ ($μ_B$ is the Bohr magneton) for optimized parameters, respecting technological constraints. However, by comparison with experimentally realized devices we find significantly larger values for the measured white flux noise, as compared to our theoretical predictions. Still, a spin sensitivity on the order of $10\,μ_{\rm B}/\rm{Hz^{1/2}}$ for optimized devices seems to be realistic.
△ Less
Submitted 10 June, 2014; v1 submitted 5 June, 2014;
originally announced June 2014.
-
Reversal mechanism of an individual Ni nanotube simultaneously studied by torque and SQUID magnetometry
Authors:
A. Buchter,
J. Nagel,
D. Rüffer,
F. Xue,
D. P. Weber,
O. F. Kieler,
T. Weimann,
J. Kohlmann,
A. B. Zorin,
E. Russo-Averchi,
R. Huber,
P. Berberich,
A. Fontcuberta i Morral,
M. Kemmler,
R. Kleiner,
D. Koelle,
D. Grundler,
M. Poggio
Abstract:
Using an optimally coupled nanometer-scale superconducting quantum interference device, we measure the magnetic flux originating from an individual ferromagnetic Ni nanotube attached to a Si cantilever. At the same time, we detect the nanotube's volume magnetization using torque magnetometry. We observe both the predicted reversible and irreversible reversal processes. A detailed comparison with m…
▽ More
Using an optimally coupled nanometer-scale superconducting quantum interference device, we measure the magnetic flux originating from an individual ferromagnetic Ni nanotube attached to a Si cantilever. At the same time, we detect the nanotube's volume magnetization using torque magnetometry. We observe both the predicted reversible and irreversible reversal processes. A detailed comparison with micromagnetic simulations suggests that vortex-like states are formed in different segments of the individual nanotube. Such stray-field free states are interesting for memory applications and non-invasive sensing.
△ Less
Submitted 18 July, 2013; v1 submitted 28 May, 2013;
originally announced May 2013.
-
Nanoscale multifunctional sensor formed by a Ni nanotube and a scanning Nb nanoSQUID
Authors:
J. Nagel,
A. Buchter,
F. Xue,
O. F. Kieler,
T. Weimann,
J. Kohlmann,
A. B. Zorin,
D. Rüffer,
E. Russo-Averchi,
R. Huber,
P. Berberich,
A. Fontcuberta i Morral,
D. Grundler,
R. Kleiner,
D. Koelle,
M. Poggio,
M. Kemmler
Abstract:
Nanoscale magnets might form the building blocks of next generation memories. To explore their functionality, magnetic sensing at the nanoscale is key. We present a multifunctional combination of a scanning nanometer-sized superconducting quantum interference device (nanoSQUID) and a Ni nanotube attached to an ultrasoft cantilever as a magnetic tip. We map out and analyze the magnetic coupling bet…
▽ More
Nanoscale magnets might form the building blocks of next generation memories. To explore their functionality, magnetic sensing at the nanoscale is key. We present a multifunctional combination of a scanning nanometer-sized superconducting quantum interference device (nanoSQUID) and a Ni nanotube attached to an ultrasoft cantilever as a magnetic tip. We map out and analyze the magnetic coupling between the Ni tube and the Nb nanoSQUID, demonstrate imaging of an Abrikosov vortex trapped in the SQUID structure - which is important in ruling out spurious magnetic signals - and reveal the high potential of the nanoSQUID as an ultrasensitive displacement detector. Our results open a new avenue for fundamental studies of nanoscale magnetism and superconductivity.
△ Less
Submitted 6 May, 2013;
originally announced May 2013.
-
Nb nano superconducting quantum interference devices with high spin sensitivity for operation in magnetic fields up to 0.5\,T
Authors:
Roman Wölbing,
Joachim Nagel,
Tobias Schwarz,
Oliver Kieler,
Thomas Weimann,
Johannes Kohlmann,
Alexander Zorin,
Matthias Kemmler,
Reinhold Kleiner,
Dieter Koelle
Abstract:
We investigate electric transport and noise properties of microstrip-type submicron direct current superconducting quantum interference devices (dc SQUIDs) based on Nb thin films and overdamped Josephson junctions with a HfTi barrier. The SQUIDs were designed for optimal spin sensitivity $S_μ^{1/2}$ upon operation in intermediate magnetic fields $B$ (tens of mT), applied perpendicular to the subst…
▽ More
We investigate electric transport and noise properties of microstrip-type submicron direct current superconducting quantum interference devices (dc SQUIDs) based on Nb thin films and overdamped Josephson junctions with a HfTi barrier. The SQUIDs were designed for optimal spin sensitivity $S_μ^{1/2}$ upon operation in intermediate magnetic fields $B$ (tens of mT), applied perpendicular to the substrate plane. Our so far best SQUID can be continuously operated in fields up to $B\approx\pm50\,\rm{mT}$ with rms flux noise $S_{Φ,\rm w}^{1/2}\leq250\,\rm{nΦ_0/Hz^{1/2}}$ in the white noise regime and spin sensitivity $S_μ^{1/2}\leq29\,\rm{μ_B/Hz^{1/2}}$. Furthermore, we demonstrate operation in $B=0.5\,\rm{T}$ with high sensitivity in flux $S_{Φ,\rm w}^{1/2}\approx680\,\rm{nΦ_0/Hz^{1/2}}$ and in electron spin $S_μ^{1/2}\approx79\,\rm{μ_B/Hz^{1/2}}$. We discuss strategies to further improve the nanoSQUID performance.
△ Less
Submitted 29 April, 2013;
originally announced April 2013.
-
Manipulation and coherence of ultra-cold atoms on a superconducting atom chip
Authors:
S. Bernon,
H. Hattermann,
D. Bothner,
M. Knufinke,
P. Weiss,
F. Jessen,
D. Cano,
M. Kemmler,
R. Kleiner,
D. Koelle,
J. Fortágh
Abstract:
The coherence of quantum systems is crucial to quantum information processing. While it has been demonstrated that superconducting qubits can process quantum information at microelectronics rates, it remains a challenge to preserve the coherence and therefore the quantum character of the information in these systems. An alternative is to share the tasks between different quantum platforms, e.g. co…
▽ More
The coherence of quantum systems is crucial to quantum information processing. While it has been demonstrated that superconducting qubits can process quantum information at microelectronics rates, it remains a challenge to preserve the coherence and therefore the quantum character of the information in these systems. An alternative is to share the tasks between different quantum platforms, e.g. cold atoms storing the quantum information processed by superconducting circuits. In our experiment, we characterize the coherence of superposition states of 87Rb atoms magnetically trapped on a superconducting atom-chip. We load atoms into a persistent-current trap engineered in the vicinity of an off-resonance coplanar resonator, and observe that the coherence of hyperfine ground states is preserved for several seconds. We show that large ensembles of a million of thermal atoms below 350 nK temperature and pure Bose-Einstein condensates with 3.5 x 10^5 atoms can be prepared and manipulated at the superconducting interface. This opens the path towards the rich dynamics of strong collective coupling regimes.
△ Less
Submitted 26 February, 2013;
originally announced February 2013.
-
Optimizing the spin sensitivity of grain boundary junction nanoSQUIDs -- towards detection of small spin systems with single-spin resolution
Authors:
Roman Wölbing,
Tobias Schwarz,
Benedikt Müller,
Joachim Nagel,
Matthias Kemmler,
Reinhold Kleiner,
Dieter Koelle
Abstract:
We present an optimization study of the spin sensitivity of nanoSQUIDs based on resistively shunted grain boundary Josephson junctions. In addition the dc SQUIDs contain a narrow constriction onto which a small magnetic particle can be placed (with its magnetic moment in the plane of the SQUID loop and perpendicular to the grain boundary) for efficient coupling of its stray magnetic field to the S…
▽ More
We present an optimization study of the spin sensitivity of nanoSQUIDs based on resistively shunted grain boundary Josephson junctions. In addition the dc SQUIDs contain a narrow constriction onto which a small magnetic particle can be placed (with its magnetic moment in the plane of the SQUID loop and perpendicular to the grain boundary) for efficient coupling of its stray magnetic field to the SQUID loop. The separation of the location of optimum coupling from the junctions allows for an independent optimization of the coupling factor $φ_μ$ and junction properties. We present different methods for calculating $φ_μ$ (for a magnetic nanoparticle placed 10\,nm above the constriction) as a function of device geometry and show that those yield consistent results. Furthermore, by numerical simulations we obtain a general expression for the dependence of the SQUID inductance on geometrical parameters of our devices, which allows to estimate their impact on the spectral density of flux noise $S_Φ$ of the SQUIDs in the thermal white noise regime. Our analysis of the dependence of $S_Φ$ and $φ_μ$ on the geometric parameters of the SQUID layout yields a spin sensitivity $S_μ^{1/2}=S_Φ^{1/2}/φ_μ$ of a few $μ_{\rm{B}}/\rm{Hz^{1/2}}$ ($μ_B$ is the Bohr magneton) for optimized parameters, respecting technological constraints. However, by comparison with experimentally realized devices we find significantly larger values for the measured white flux noise, as compared to our theoretical predictions. Still, a spin sensitivity on the order of $10\,μ_{\rm B}/\rm{Hz^{1/2}}$ for optimized devices seems to be realistic.
△ Less
Submitted 10 June, 2014; v1 submitted 7 January, 2013;
originally announced January 2013.
-
Direct current superconducting quantum interferometers with asymmetric shunt resistors
Authors:
M. Rudolph,
J. Nagel,
J. M. Meckbach,
M. Kemmler,
M. Siegel,
K. Ilin,
D. Koelle,
R. Kleiner
Abstract:
We have investigated asymmetrically shunted Nb/Al-AlO$_x$/Nb direct current (dc) superconducting quantum interference devices (SQUIDs). While kee** the total resistance $R$ identical to a comparable symmetric SQUID with $R^{-1} = R_1^{-1} + R_2^{-1}$, we shunted only one of the two Josephson junctions with $R = R_{1,2}/2$. Simulations predict that the optimum energy resolution $ε$ and thus also…
▽ More
We have investigated asymmetrically shunted Nb/Al-AlO$_x$/Nb direct current (dc) superconducting quantum interference devices (SQUIDs). While kee** the total resistance $R$ identical to a comparable symmetric SQUID with $R^{-1} = R_1^{-1} + R_2^{-1}$, we shunted only one of the two Josephson junctions with $R = R_{1,2}/2$. Simulations predict that the optimum energy resolution $ε$ and thus also the noise performance of such an asymmetric SQUID can be 3--4 times better than that of its symmetric counterpart. Experiments at a temperature of 4.2\,K yielded $ε\approx 32\,\hbar$ for an asymmetric SQUID with an inductance of $22\,\rm{pH}$. For a comparable symmetric device $ε= 110\,\hbar$ was achieved, confirming our simulation results.
△ Less
Submitted 30 June, 2012;
originally announced July 2012.
-
Excess flux stability fingerprints in the I_c(B)-T_c(B) phase boundary of superconducting thin films with quasiperiodic microtopology
Authors:
D. Bothner,
R. Seidl,
V. R. Misko,
R. Kleiner,
D. Koelle,
M. Kemmler
Abstract:
We experimentally investigate the magnetic field $B$ dependence of the critical current I_c and the transition temperature T_c, i.e. the I_c(B)-T_c(B) phase boundary, of superconducting niobium thin films patterned with periodic and quasiperiodic antidot arrays on the submicron scale. For this purpose we monitor current-voltage characteristics at different values of B and T. We investigate samples…
▽ More
We experimentally investigate the magnetic field $B$ dependence of the critical current I_c and the transition temperature T_c, i.e. the I_c(B)-T_c(B) phase boundary, of superconducting niobium thin films patterned with periodic and quasiperiodic antidot arrays on the submicron scale. For this purpose we monitor current-voltage characteristics at different values of B and T. We investigate samples with antidots positioned at the vertices of two different tilings with quasiperiodic symmetry, namely the Shield Tiling and the Tuebingen Triangle Tiling. For reference we investigate a sample with a triangular antidot lattice. We find modulations of the phase boundary for both quasiperiodic tilings, which were predicted by numerical simulations but not observed in experiments yet. The particularity of these commensurability effects is that they correspond to excess flux densities, which are slightly higher than the matching flux. The observed matching effects can be explained by quasiperiodic caging of interstitial vortices and/or the formation of symmetry induced giant vortices.
△ Less
Submitted 25 June, 2012;
originally announced June 2012.
-
Localization of superconductivity in superconductor-electromagnet hybrids
Authors:
G. W. Ataklti,
A. Yu. Aladyshkin,
W. Gillijns,
I. M. Nefedov,
J. Van de Vondel,
A. V. Silhanek,
M. Kemmler,
R. Kleiner,
D. Koelle,
V. V. Moshchalkov
Abstract:
We investigate the nucleation of superconductivity in a superconducting Al strip under the influence of the magnetic field generated by a current-carrying Nb wire, perpendicularly oriented and located underneath the strip. The inhomogeneous magnetic field, induced by the Nb wire, produces a spatial modulation of the critical temperature T_c, leading to a controllable localization of the supercondu…
▽ More
We investigate the nucleation of superconductivity in a superconducting Al strip under the influence of the magnetic field generated by a current-carrying Nb wire, perpendicularly oriented and located underneath the strip. The inhomogeneous magnetic field, induced by the Nb wire, produces a spatial modulation of the critical temperature T_c, leading to a controllable localization of the superconducting order parameter (OP) wave function. We demonstrate that close to the phase boundary T_c(B_ext) the localized OP solution can be displaced reversibly by either applying an external perpendicular magnetic field B_ext or by changing the amplitude of the inhomogeneous field.
△ Less
Submitted 20 April, 2012;
originally announced April 2012.
-
Phase-sensitive evidence for dx2-y2-pairing symmetry in the parent-structure high-Tc cuprate superconductor Sr1-xLaxCuO2
Authors:
J. Tomaschko,
S. Scharinger,
V. Leca,
J. Nagel,
M. Kemmler,
T. Selistrovski,
D. Koelle,
R. Kleiner
Abstract:
Even after 25 years of research the pairing mechanism and - at least for electron doped compounds - also the order parameter symmetry of the high transition temperature (high-Tc) cuprate superconductors is still under debate. One of the reasons is the complex crystal structure of most of these materials. An exception are the infinite layer (IL) compounds consisting essentially of CuO2 planes. Unfo…
▽ More
Even after 25 years of research the pairing mechanism and - at least for electron doped compounds - also the order parameter symmetry of the high transition temperature (high-Tc) cuprate superconductors is still under debate. One of the reasons is the complex crystal structure of most of these materials. An exception are the infinite layer (IL) compounds consisting essentially of CuO2 planes. Unfortunately, these materials are difficult to grow and, thus, there are only few experimental investigations. Recently, we succeeded in depositing high quality films of the electron doped IL compound Sr1-xLaxCuO2 (SLCO), with x approximately 0.15, and on the fabrication of well-defined grain boundary Josephson junctions (GBJs) based on such SLCO films. Here we report on a phase sensitive study of the superconducting order parameter based on GBJ SQUIDs from a SLCO film grown on a tetracrystal substrate. Our results show that also the parent structure of the high-Tc cuprates has dx2-y2-wave symmetry, which thus seems to be inherent to cuprate superconductivity.
△ Less
Submitted 23 March, 2012;
originally announced March 2012.
-
The phase boundary of superconducting niobium thin films with antidot arrays fabricated with microsphere photolithography
Authors:
Daniel Bothner,
Conrad Clauss,
Elisabeth Koroknay,
Matthias Kemmler,
Tobias Gaber,
Michael Jetter,
Marc Scheffler,
Peter Michler,
Martin Dressel,
Dieter Koelle,
Reinhold Kleiner
Abstract:
The experimental investigation of the $I_c(B)$--$T_c(B)$ phase boundary of superconducting niobium films with large area quasihexagonal hole arrays is reported. The hole arrays were patterned with microsphere photolithography. We investigate the perforated niobium films by means of electrical directed current transport measurements close to the transition temperature $T_c$ in perpendicularly appli…
▽ More
The experimental investigation of the $I_c(B)$--$T_c(B)$ phase boundary of superconducting niobium films with large area quasihexagonal hole arrays is reported. The hole arrays were patterned with microsphere photolithography. We investigate the perforated niobium films by means of electrical directed current transport measurements close to the transition temperature $T_c$ in perpendicularly applied magnetic fields. We find pronounced modulations of the critcal current with applied magnetic field, which we interpret as a consequence of commensurable states between the Abrikosov vortex lattice and the quasihexagonal pinning array. Furthermore, we observe Little-Parks oscillations in the critical temperature vs magnetic field.
△ Less
Submitted 12 March, 2012; v1 submitted 28 February, 2012;
originally announced February 2012.
-
Magnetic hysteresis effects in superconducting coplanar microwave resonators
Authors:
Daniel Bothner,
Tobias Gaber,
Matthias Kemmler,
Dieter Koelle,
Reinhold Kleiner,
Stefan Wünsch,
Michael Siegel
Abstract:
We performed transmission spectroscopy experiments on coplanar half wavelength niobium resonators at a temperature T=4.2 K. We observe not only a strong dependence of the quality factor Q and the resonance frequency f_res on an externally applied magnetic field but also on the magnetic history of our resonators, i.e. on the spatial distribution of trapped Abrikosov vortices in the device. We find…
▽ More
We performed transmission spectroscopy experiments on coplanar half wavelength niobium resonators at a temperature T=4.2 K. We observe not only a strong dependence of the quality factor Q and the resonance frequency f_res on an externally applied magnetic field but also on the magnetic history of our resonators, i.e. on the spatial distribution of trapped Abrikosov vortices in the device. We find these results to be valid for a broad range of frequencies and angles between the resonator plane and the magnetic field direction as well as for resonators with and without antidots near the edges of the center conductor and the ground planes. In a detailed analysis we show, that characteristic features of the experimental data can only be reproduced in calculations, if a highly inhomogeneous rf-current density and a flux density gradient with maxima at the edges of the superconductor is assumed. We furthermore demonstrate, that the hysteretic behaviour of the resonator properties can be used to considerably reduce the vortex induced losses and to fine-tune the resonance frequency by the proper way of cycling to a desired magnetic field.
△ Less
Submitted 27 February, 2012;
originally announced February 2012.
-
Edge superconductivity in Nb thin film microbridges revealed by integral and spatially resolved electric transport
Authors:
R. Werner,
A. Yu. Aladyshkin,
I. M. Nefedov,
A. V. Putilov,
M. Kemmler,
D. Bothner,
A. Loerincz,
K. Ilin,
M. Siegel,
R. Kleiner,
D. Koelle
Abstract:
The resistance $R$ vs perpendicular external magnetic field $H$ was measured for superconducting Nb thin--film microbridges with and without microholes [antidots (ADs)]. Well below the transition temperature, integral $R(H)$ measurements of the resistive transition to the normal state on the plain bridge show two distinct regions, which can be identified as bulk and edge superconductivity, respect…
▽ More
The resistance $R$ vs perpendicular external magnetic field $H$ was measured for superconducting Nb thin--film microbridges with and without microholes [antidots (ADs)]. Well below the transition temperature, integral $R(H)$ measurements of the resistive transition to the normal state on the plain bridge show two distinct regions, which can be identified as bulk and edge superconductivity, respectively. The latter case appears when bulk superconductivity becomes suppressed at the upper critical field $H_{c2}$ and below the critical field of edge superconductivity $H_{c3}\approx 1.7\, H_{c2}$. The presence of additional edges in the AD bridge leads to a different shape of the $R(H)$ curves. We used low-temperature scanning laser microscopy (LTSLM) to visualize the current distribution in the plain and AD bridge upon swee** $H$. While the plain bridge shows a dominant LTSLM signal at its edges for $H > H_{c2}$ the AD bridge also gives a signal from the inner parts of the bridge due to the additional edge states around the ADs. LTSLM reveals an asymmetry in the current distribution between left and right edges, which confirms theoretical predictions. Furthermore, the experimental results are in good agreement with our numerical simulations (based on the time-dependent Ginzburg--Landau model) yielding the spatial distribution of the order parameter and current density for different bias currents and $H$ values.
△ Less
Submitted 10 December, 2011;
originally announced December 2011.
-
Reducing vortex losses in superconducting microwave resonators with microsphere patterned antidot arrays
Authors:
D. Bothner,
C. Clauss,
E. Koroknay,
M. Kemmler,
T. Gaber,
M. Jetter,
M. Scheffler,
P. Michler,
M. Dressel,
D. Koelle,
R. Kleiner
Abstract:
We experimentally investigate the vortex induced energy losses in niobium coplanar waveguide resonators with and without quasihexagonal arrays of nanoholes (antidots), where large-area antidot patterns have been fabricated using self-assembling microsphere lithography. We perform transmission spectroscopy experiments around 6.25 and 12.5 GHz in magnetic field cooling and zero field cooling procedu…
▽ More
We experimentally investigate the vortex induced energy losses in niobium coplanar waveguide resonators with and without quasihexagonal arrays of nanoholes (antidots), where large-area antidot patterns have been fabricated using self-assembling microsphere lithography. We perform transmission spectroscopy experiments around 6.25 and 12.5 GHz in magnetic field cooling and zero field cooling procedures with perpendicular magnetic fields up to B=27 mT at a temperature T=4.2 K. We find that the introduction of antidot arrays into resonators reduces vortex induced losses by more than one order of magnitude.
△ Less
Submitted 28 October, 2011;
originally announced October 2011.
-
Superconducting quantum interference devices with submicron Nb/HfTi/Nb junctions for investigation of small magnetic particles
Authors:
J. Nagel,
O. F. Kieler,
T. Weimann,
R. Wölbing,
J. Kohlmann,
A. B. Zorin,
R. Kleiner,
D. Koelle,
M. Kemmler
Abstract:
We investigated, at temperature $4.2\,\mathrm{K}$, electric transport, flux noise and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a f…
▽ More
We investigated, at temperature $4.2\,\mathrm{K}$, electric transport, flux noise and resulting spin sensitivity of miniaturized Nb direct current superconducting quantum interference devices (SQUIDs) based on submicron Josephson junctions with HfTi barriers. The SQUIDs are either of the magnetometer-type or gradiometric in layout. In the white noise regime, for the best magnetometer we obtain a flux noise $S_Φ^{1/2}=250\,\mathrm{n}Φ_0/\mathrm{Hz}^{1/2}$, corresponding to a spin sensitivity $S^{1/2}_μ\,\ge\,29\,μ_B/\mathrm{Hz}^{1/2}$. For the gradiometer we find $S_Φ^{1/2}=300\,\mathrm{n}Φ_0/\mathrm{Hz}^{1/2}$ and $S^{1/2}_μ\,\ge\,44\,μ_B/\mathrm{Hz}^{1/2}$. The devices can still be optimized with respect to flux noise and coupling between a magnetic particle and the SQUID, leaving room for further improvement towards single spin resolution.
△ Less
Submitted 10 June, 2011;
originally announced June 2011.
-
Mesoscopic cross-film cryotrons: Vortex trap** and dc-Josephson-like oscillations of the critical current
Authors:
A. Yu. Aladyshkin,
G. W. Ataklti,
W. Gillijns,
I. M. Nefedov,
I. A. Shereshevsky,
A. V. Silhanek,
J. Van de Vondel,
M. Kemmler,
R. Kleiner,
D. Koelle,
V. V. Moshchalkov
Abstract:
We investigate theoretically and experimentally the transport properties of a plain Al superconducting strip in the presence of a single straight current-carrying wire, oriented perpendicular to the superconducting strip. It is well known that the critical current of the superconducting strip, Ic, in such cryotron--like system can be tuned by changing the current in the control wire, Iw. We demons…
▽ More
We investigate theoretically and experimentally the transport properties of a plain Al superconducting strip in the presence of a single straight current-carrying wire, oriented perpendicular to the superconducting strip. It is well known that the critical current of the superconducting strip, Ic, in such cryotron--like system can be tuned by changing the current in the control wire, Iw. We demonstrated that the discrete change in the number of the pinned vortices/antivortices inside the narrow and long strip nearby the current-carrying wire results in a peculiar oscillatory dependence of Ic on Iw.
△ Less
Submitted 22 February, 2011;
originally announced February 2011.
-
Improving the performance of superconducting microwave resonators in magnetic fields
Authors:
Daniel Bothner,
Tobias Gaber,
Matthias Kemmler,
Dieter Koelle,
Reinhold Kleiner
Abstract:
The operation of superconducting coplanar waveguide cavities, as used for circuit quantum electrodynamics and kinetic inductance detectors, in perpendicular magnetic fields normally leads to a reduction of the device performance due to energy dissipating Abrikosov vortices. We experimentally investigate the vortex induced energy losses in such Nb resonators with different spatial distributions of…
▽ More
The operation of superconducting coplanar waveguide cavities, as used for circuit quantum electrodynamics and kinetic inductance detectors, in perpendicular magnetic fields normally leads to a reduction of the device performance due to energy dissipating Abrikosov vortices. We experimentally investigate the vortex induced energy losses in such Nb resonators with different spatial distributions of micropatterned pinning sites (antidots) by transmission spectroscopy measurements at 4.2 K. In comparison to resonators without antidots we find a significant reduction of vortex induced losses and thus increased quality factors over a broad range of frequencies and applied powers in moderate fields.
△ Less
Submitted 17 January, 2011;
originally announced January 2011.
-
Enhancing the critical current in quasiperiodic pinning arrays below and above the matching magnetic flux
Authors:
V. R. Misko,
D. Bothner,
M. Kemmler,
R. Kleiner,
D. Koelle,
F. M. Peeters,
Franco Nori
Abstract:
Quasiperiodic pinning arrays, as recently demonstrated theoretically and experimentally using a five-fold Penrose tiling, can lead to a significant enhancement of the critical current Ic as compared to "traditional" regular pinning arrays. However, while regular arrays showed only a sharp peak in Ic(Phi) at the matching flux Phi1 and quasiperiodic arrays provided a much broader maximum at Phi<Phi1…
▽ More
Quasiperiodic pinning arrays, as recently demonstrated theoretically and experimentally using a five-fold Penrose tiling, can lead to a significant enhancement of the critical current Ic as compared to "traditional" regular pinning arrays. However, while regular arrays showed only a sharp peak in Ic(Phi) at the matching flux Phi1 and quasiperiodic arrays provided a much broader maximum at Phi<Phi1, both types of pinning arrays turned out to be inefficient for fluxes larger than Phi1. We demonstrate theoretically and experimentally the enhancement of Ic(Phi) for Phi>Phi1 by using non-Penrose quasiperiodic pinning arrays. This result is based on a qualitatively different mechanism of flux pinning by quasiperiodic pinning arrays and could be potentially useful for applications in superconducting micro-electronic devices operating in a broad range of magnetic fields.
△ Less
Submitted 24 October, 2010;
originally announced October 2010.
-
Trapped electron coupled to superconducting devices
Authors:
P. Bushev,
D. Bothner,
J. Nagel,
M. Kemmler,
K. B. Konovalenko,
A. Loerincz,
K. Ilin,
M. Siegel,
D. Koelle,
R. Kleiner,
F. Schmidt-Kaler
Abstract:
We propose to couple a trapped single electron to superconducting structures located at a variable distance from the electron. The electron is captured in a cryogenic Penning trap using electric fields and a static magnetic field in the Tesla range. Measurements on the electron will allow investigating the properties of the superconductor such as vortex structure, dam** and decoherence. We propo…
▽ More
We propose to couple a trapped single electron to superconducting structures located at a variable distance from the electron. The electron is captured in a cryogenic Penning trap using electric fields and a static magnetic field in the Tesla range. Measurements on the electron will allow investigating the properties of the superconductor such as vortex structure, dam** and decoherence. We propose to couple a superconducting microwave resonator to the electron in order to realize a circuit QED-like experiment, as well as to couple superconducting Josephson junctions or superconducting quantum interferometers (SQUIDs) to the electron. The electron may also be coupled to a vortex which is situated in a double well potential, realized by nearby pinning centers in the superconductor, acting as a quantum mechanical two level system that can be controlled by a transport current tilting the double well potential. When the vortex is trapped in the interferometer arms of a SQUID, this would allow its detection both by the SQUID and by the electron.
△ Less
Submitted 17 September, 2010;
originally announced September 2010.
-
YBa2Cu3O7 grain boundary junctions and low-noise superconducting quantum interference devices patterned by a focused ion beam down to 80 nm linewidth
Authors:
J. Nagel,
K. B. Konovalenko,
M. Kemmler,
M. Turad,
R. Werner,
E. Kleisz,
S. Menzel,
R. Klingeler,
B. Büchner,
R. Kleiner,
D. Koelle
Abstract:
YBa$_2$Cu$_3$O$_7$ 24$^\circ$ (30$^\circ$) bicrystal grain boundary junctions (GBJs), shunted with 60\,nm (20\,nm) thick Au, were fabricated by focused ion beam milling with widths $80\,{\rm nm} \le w \le 7.8\,μ$m. At 4.2\,K we find critical current densities $j_c$ in the $10^5\,{\rm A/cm^2}$ range %\dkc{\#1} (without a clear dependence on $w$) and an increase in resistance times junction area…
▽ More
YBa$_2$Cu$_3$O$_7$ 24$^\circ$ (30$^\circ$) bicrystal grain boundary junctions (GBJs), shunted with 60\,nm (20\,nm) thick Au, were fabricated by focused ion beam milling with widths $80\,{\rm nm} \le w \le 7.8\,μ$m. At 4.2\,K we find critical current densities $j_c$ in the $10^5\,{\rm A/cm^2}$ range %\dkc{\#1} (without a clear dependence on $w$) and an increase in resistance times junction area $ρ$ with an approximate scaling $ρ\propto w^{1/2}$. For the narrowest GBJs $j_cρ\approx 100\,μ$V, which is promising for the realization of sensitive nanoSQUIDs for the detection of small spin systems. We demonstrate that our fabrication process allows the realization of sensitive nanoscale dc SQUIDs; for a SQUID with $w\approx 100$\,nm wide GBJs we find an rms magnetic flux noise spectral density of $S_Φ^{1/2}\approx 4\,μΦ_0/{\rm Hz}^{1/2}$ in the white noise limit. We also derive an expression for the spin sensitivity $S_μ^{1/2}$, which depends on $S_Φ^{1/2}$, on the location and orientation of the magnetic moment of a magnetic particle to be detected by the SQUID, and on the SQUID geometry. For the not optimized SQUIDs presented here, we estimate $S_μ^{1/2}=390\,μ_B/\sqrt{\rm{Hz}}$, which could be further improved by at least an order of magnitude.
△ Less
Submitted 14 September, 2010;
originally announced September 2010.
-
Critical current diffraction pattern of SIFS Josephson junctions with step-like F-layer
Authors:
M. Weides,
U. Peralagu,
H. Kohlstedt,
J. Pfeiffer,
M. Kemmler,
C. Gürlich,
E. Goldobin,
D. Koelle,
R. Kleiner
Abstract:
We present the latest generation of superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions with a step-like thickness of the ferromagnetic (F) layer. The F-layer thicknesses $d_1$ and $d_2$ in both halves were varied to obtain different combinations of positive and negative critical current densities $j_{c,1}$ and $j_{c,2}$. The measured dependences of the critical current…
▽ More
We present the latest generation of superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions with a step-like thickness of the ferromagnetic (F) layer. The F-layer thicknesses $d_1$ and $d_2$ in both halves were varied to obtain different combinations of positive and negative critical current densities $j_{c,1}$ and $j_{c,2}$. The measured dependences of the critical current on applied magnetic field can be well described by a model which takes into account different critical current densities (obtained from reference junctions) and different net magnetization of the multidomain ferromagnetic layer in both halves.
△ Less
Submitted 15 July, 2010; v1 submitted 26 June, 2010;
originally announced June 2010.
-
Magnetic interference patterns in 0-Pi SIFS Josephson junctions: effects of asymmetry between 0 and Pi regions
Authors:
M. Kemmler,
M. Weides,
M. Weiler,
M. Opel,
S. T. B. Goennenwein,
A. S. Vasenko,
A. A. Golubov,
H. Kohlstedt,
D. Koelle,
R. Kleiner,
E. Goldobin
Abstract:
We present a detailed analysis of the dependence of the critical current I_c on the magnetic field B of 0, Pi, and 0-Pi superconductor-insulator-ferromagnet-superconductor Josephson junctions. I_c(B) of the 0 and Pi junction closely follows a Fraunhofer pattern, indicating a homogeneous critical current density j_c(x). The maximum of I_c(B) is slightly shifted along the field axis, pointing to a…
▽ More
We present a detailed analysis of the dependence of the critical current I_c on the magnetic field B of 0, Pi, and 0-Pi superconductor-insulator-ferromagnet-superconductor Josephson junctions. I_c(B) of the 0 and Pi junction closely follows a Fraunhofer pattern, indicating a homogeneous critical current density j_c(x). The maximum of I_c(B) is slightly shifted along the field axis, pointing to a small remanent in-plane magnetization of the F-layer along the field axis. I_c(B) of the 0-Pi junction exhibits the characteristic central minimum. I_c however has a finite value here, due to an asymmetry of j_c in the 0 and Pi part. In addition, this I_c(B) exhibits asymmetric maxima and bumped minima. To explain these features in detail, flux penetration being different in the 0 part and the Pi part needs to be taken into account. We discuss this asymmetry in relation to the magnetic properties of the F-layer and the fabrication technique used to produce the 0-Pi junctions.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
-
Suppression of dissipation in Nb thin films with triangular antidot arrays by random removal of pinning sites
Authors:
M. Kemmler,
D. Bothner,
K. Ilin,
M. Siegel,
R. Kleiner,
D. Koelle
Abstract:
The depinning current Ic versus applied magnetic field B close to the transition temperature Tc of Nb thin films with randomly diluted triangular arrays of antidots is investigated. % Our experiments confirm essential features in Ic(B) as predicted by Reichhardt and Olson Reichhardt [Phys.Rev. B 76, 094512 (2007)]. % We show that, by introducing disorder into periodic pinning arrays, Ic can be e…
▽ More
The depinning current Ic versus applied magnetic field B close to the transition temperature Tc of Nb thin films with randomly diluted triangular arrays of antidots is investigated. % Our experiments confirm essential features in Ic(B) as predicted by Reichhardt and Olson Reichhardt [Phys.Rev. B 76, 094512 (2007)]. % We show that, by introducing disorder into periodic pinning arrays, Ic can be enhanced. % In particular, for arrays with fixed density n_p of antidots, an increase in dilution Pd induces an increase in Ic and decrease of the flux-flow voltage for B>Bp=n_p Phi_0.
△ Less
Submitted 10 September, 2008;
originally announced September 2008.
-
Static and dynamic properties of 0, pi, and 0-pi ferromagnetic tunnel Josephson Junctions
Authors:
J. Pfeiffer,
M. Kemmler,
D. Koelle,
R. Kleiner,
E. Goldobin,
M. Weides,
A. K. Feofanov,
J. Lisenfeld,
A. V. Ustinov
Abstract:
We present experimental studies of static and dynamic properties of 0, pi and 0-pi superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson junctions of small and intermediate length. In the underdamped limit these junctions exhibit a rich dynamical behavior such as resonant steps on the current-voltage characteristics. Varying the experimental conditions, zero field steps, Fiske ste…
▽ More
We present experimental studies of static and dynamic properties of 0, pi and 0-pi superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson junctions of small and intermediate length. In the underdamped limit these junctions exhibit a rich dynamical behavior such as resonant steps on the current-voltage characteristics. Varying the experimental conditions, zero field steps, Fiske steps and Shapiro steps are observed with a high resolution. A strong signature of the 0-pi Josephson junction is demonstrated by measuring the critical current as a function of two components (B_x, B_y) of an in-plane magnetic field. The experimental observation of a half-integer zero field step in 0-pi SIFS junctions is presented.
△ Less
Submitted 21 January, 2008;
originally announced January 2008.
-
Ferromagnetic 0-pi Josephson junctions
Authors:
M. Weides,
H. Kohlstedt,
R. Waser,
M. Kemmler,
J. Pfeiffer,
D. Koelle,
R. Kleiner,
E. Goldobin
Abstract:
We present a study on low-$T_c$ superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson junctions. SIFS junctions have gained considerable interest in recent years because they show a number of interesting properties for future classical and quantum computing devices. We optimized the fabrication process of these junctions to achieve a homogeneous current transport, ending up with h…
▽ More
We present a study on low-$T_c$ superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson junctions. SIFS junctions have gained considerable interest in recent years because they show a number of interesting properties for future classical and quantum computing devices. We optimized the fabrication process of these junctions to achieve a homogeneous current transport, ending up with high-quality samples. Depending on the thickness of the ferromagnetic layer and on temperature, the SIFS junctions are in the ground state with a phase drop either 0 or $π$. By using a ferromagnetic layer with variable step-like thickness along the junction, we obtained a so-called 0-$π$ Josephson junction, in which 0 and $π$ ground states compete with each other. At a certain temperature the 0 and $π$ parts of the junction are perfectly symmetric, i.e. the absolute critical current densities are equal. In this case the degenerate ground state corresponds to a vortex of supercurrent circulating clock- or counterclockwise and creating a magnetic flux which carries a fraction of the magnetic flux quantum $Φ_0$.
△ Less
Submitted 27 April, 2007; v1 submitted 29 January, 2007;
originally announced January 2007.
-
0-pi Josephson tunnel junctions with ferromagnetic barrier
Authors:
M. Weides,
M. Kemmler,
E. Goldobin,
H. Kohlstedt,
R. Waser,
D. Koelle,
R. Kleiner
Abstract:
We fabricated high quality Nb/Al_2O_3/Ni_{0.6}Cu_{0.4}/Nb superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions. Using a ferromagnetic layer with a step-like thickness, we obtain a 0-pi junction, with equal lengths and critical currents of 0 and pi parts. The ground state of our 330 microns (1.3 lambda_J) long junction corresponds to a spontaneous vortex of supercurrent…
▽ More
We fabricated high quality Nb/Al_2O_3/Ni_{0.6}Cu_{0.4}/Nb superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions. Using a ferromagnetic layer with a step-like thickness, we obtain a 0-pi junction, with equal lengths and critical currents of 0 and pi parts. The ground state of our 330 microns (1.3 lambda_J) long junction corresponds to a spontaneous vortex of supercurrent pinned at the 0-pi step and carrying ~6.7% of the magnetic flux quantum Phi_0. The dependence of the critical current on the applied magnetic field shows a clear minimum in the vicinity of zero field.
△ Less
Submitted 5 October, 2006; v1 submitted 26 May, 2006;
originally announced May 2006.
-
Commensurability effects in superconducting Nb films with quasiperiodic pinning arrays
Authors:
M. Kemmler,
C. Guerlich,
A. Sterck,
H. Poehler,
M. Neuhaus,
M. Siegel,
R. Kleiner,
D. Koelle
Abstract:
We study experimentally the critical depinning current Ic versus applied magnetic field B in Nb thin films which contain 2D arrays of circular antidots placed on the nodes of quasiperiodic (QP) fivefold Penrose lattices. Close to the transition temperature Tc we observe matching of the vortex lattice with the QP pinning array, confirming essential features in the Ic(B) patterns as predicted by M…
▽ More
We study experimentally the critical depinning current Ic versus applied magnetic field B in Nb thin films which contain 2D arrays of circular antidots placed on the nodes of quasiperiodic (QP) fivefold Penrose lattices. Close to the transition temperature Tc we observe matching of the vortex lattice with the QP pinning array, confirming essential features in the Ic(B) patterns as predicted by Misko et al. [Phys. Rev. Lett, vol.95, 177007 (2005)]. We find a significant enhancement in Ic(B) for QP pinning arrays in comparison to Ic in samples with randomly distributed antidots or no antidots.
△ Less
Submitted 19 October, 2006; v1 submitted 23 May, 2006;
originally announced May 2006.
-
High quality ferromagnetic 0 and pi Josephson tunnel junctions
Authors:
M. Weides,
M. Kemmler,
H. Kohlstedt,
A. Buzdin,
E. Goldobin,
D. Koelle,
R. Kleiner
Abstract:
We fabricated high quality $\Nb/\Al_2Ø_3/\Ni_{0.6}\Cu_{0.4}/\Nb$ superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions. Depending on the thickness of the ferromagnetic $\Ni_{0.6}\Cu_{0.4}$ layer and on the ambient temperature, the junctions were in the 0 or $π$ ground state. All junctions have homogeneous interfaces showing almost perfect Fraunhofer patterns. The…
▽ More
We fabricated high quality $\Nb/\Al_2Ø_3/\Ni_{0.6}\Cu_{0.4}/\Nb$ superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions. Depending on the thickness of the ferromagnetic $\Ni_{0.6}\Cu_{0.4}$ layer and on the ambient temperature, the junctions were in the 0 or $π$ ground state. All junctions have homogeneous interfaces showing almost perfect Fraunhofer patterns. The $\Al_2Ø_3$ tunnel barrier allows to achieve rather low dam**, which is desired for many experiments especially in the quantum domain. The McCumber parameter $β_c$ increases exponentially with decreasing temperature and reaches $β_c\approx700$ at $T=2.1 {\rm K}$. The critical current density in the $π$ state was up to $5\:\rm{A/cm^2}$ at $T=2.1 {\rm K}$, resulting in a Josephson penetration depth $λ_J$ as low as $160\:\rm{μm}$. Experimentally determined junction parameters are well described by theory taking into account spin-flip scattering in the $\Ni_{0.6}\Cu_{0.4}$ layer and different transparencies of the interfaces.
△ Less
Submitted 24 August, 2006; v1 submitted 4 April, 2006;
originally announced April 2006.
-
Diffraction of a Bose-Einstein condensate from a Magnetic Lattice on a Micro Chip
Authors:
A. Guenther,
S. Kraft,
M. Kemmler,
D. Koelle,
R. Kleiner,
C. Zimmermann,
J. Fortagh
Abstract:
We experimentally study the diffraction of a Bose-Einstein condensate from a magnetic lattice, realized by a set of 372 parallel gold conductors which are micro fabricated on a silicon substrate. The conductors generate a periodic potential for the atoms with a lattice constant of 4 microns. After exposing the condensate to the lattice for several milliseconds we observe diffraction up to 5th or…
▽ More
We experimentally study the diffraction of a Bose-Einstein condensate from a magnetic lattice, realized by a set of 372 parallel gold conductors which are micro fabricated on a silicon substrate. The conductors generate a periodic potential for the atoms with a lattice constant of 4 microns. After exposing the condensate to the lattice for several milliseconds we observe diffraction up to 5th order by standard time of flight imaging techniques. The experimental data can be quantitatively interpreted with a simple phase imprinting model. The demonstrated diffraction grating offers promising perspectives for the construction of an integrated atom interferometer.
△ Less
Submitted 29 July, 2005; v1 submitted 8 April, 2005;
originally announced April 2005.
-
Combined chips for atom-optics
Authors:
A. Guenther,
M. Kemmler,
S. Kraft,
C. J. Vale,
C. Zimmermann,
J. Fortagh
Abstract:
We present experiments with Bose-Einstein condensates on a combined atom chip. The combined structure consists of a large-scale "carrier chip" and smaller "atom-optics chips", containing micron-sized elements. This allows us to work with condensates very close to chip surfaces without suffering from fragmentation or losses due to thermally driven spin flips. Precise three-dimensional positioning…
▽ More
We present experiments with Bose-Einstein condensates on a combined atom chip. The combined structure consists of a large-scale "carrier chip" and smaller "atom-optics chips", containing micron-sized elements. This allows us to work with condensates very close to chip surfaces without suffering from fragmentation or losses due to thermally driven spin flips. Precise three-dimensional positioning and transport with constant trap frequencies are described. Bose-Einstein condensates were manipulated with submicron accuracy above atom-optics chips. As an application of atom chips, a direction sensitive magnetic field microscope is demonstrated.
△ Less
Submitted 1 August, 2005; v1 submitted 8 April, 2005;
originally announced April 2005.