-
Quantum Confinement of Electron-Phonon Coupling in Graphene Quantum Dots
Authors:
Marios Zacharias,
Pantelis C. Kelires
Abstract:
On the basis of first-principles calculations and the special displacement method, we demonstrate the quantum confinement scaling law of the phonon-induced gap renormalization of graphene quantum dots (GQDs). We employ zigzag-edged GQDs with hydrogen passivation and embedded in hexagonal boron nitride. Our calculations for GQDs in the sub-10 nm region reveal strong quantum confinement of the zero-…
▽ More
On the basis of first-principles calculations and the special displacement method, we demonstrate the quantum confinement scaling law of the phonon-induced gap renormalization of graphene quantum dots (GQDs). We employ zigzag-edged GQDs with hydrogen passivation and embedded in hexagonal boron nitride. Our calculations for GQDs in the sub-10 nm region reveal strong quantum confinement of the zero-point renormalization ranging from 20 to 250 meV. To obtain these values we introduce a correction to the Allen-Heine theory of temperature-dependent energy levels that arises from the phonon-induced splitting of 2-fold degenerate edge states. This correction amounts to more than 50% of the gap renormalization. We also present momentum-resolved spectral functions of GQDs, which are not reported in previous contributions. Our results lay the foundation to systematically engineer temperature-dependent electronic structures of GQDs for applications in solar cells, electronic transport, and quantum computing devices.
△ Less
Submitted 15 October, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Multi-phonon diffuse scattering in solids from first-principles: Application to layered crystals and 2D materials
Authors:
Marios Zacharias,
Hélène Seiler,
Fabio Caruso,
Daniela Zahn,
Feliciano Giustino,
Pantelis C. Kelires,
Ralph Ernstorfer
Abstract:
Time-resolved diffuse scattering experiments have gained increasing attention due to their potential to reveal non-equilibrium dynamics of crystal lattice vibrations with full momentum resolution. Although progress has been made in interpreting experimental data on the basis of one-phonon scattering, understanding the role of individual phonons can be sometimes hindered by multi-phonon excitations…
▽ More
Time-resolved diffuse scattering experiments have gained increasing attention due to their potential to reveal non-equilibrium dynamics of crystal lattice vibrations with full momentum resolution. Although progress has been made in interpreting experimental data on the basis of one-phonon scattering, understanding the role of individual phonons can be sometimes hindered by multi-phonon excitations. In Ref. [{\it arXiv:2103.10108}] we have introduced a rigorous approach for the calculation of the all-phonon inelastic scattering intensity of solids from first-principles. In the present work, we describe our implementation in detail and show that multi-phonon interactions are captured efficiently by exploiting translational and time-reversal symmetries of the crystal. We demonstrate its predictive power by calculating the scattering patterns of monolayer molybdenum disulfide (MoS$_2$), bulk MoS$_2$, and black phosphorus (bP), and we obtain excellent agreement with our measurements of thermal electron diffuse scattering. Remarkably, our results show that multi-phonon excitations dominate in bP across multiple Brillouin zones, while in MoS$_2$ they play a less pronounced role. We expand our analysis for each system and examine the effect of individual atomic and interatomic vibrational motion on the diffuse scattering signals. We further demonstrate the high-throughput capability of our approach by reporting all-phonon scattering maps of 2D MoSe2, WSe2, WS2, graphene, and CdI2, rationalizing in each case the effect of multi-phonon processes. As a side point, we show that the special displacement method reproduces the thermally distorted configuration that generates precisely the all-phonon diffuse pattern.
△ Less
Submitted 22 September, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Efficient first-principles methodology for the calculation of the all-phonon inelastic scattering in solids
Authors:
Marios Zacharias,
Hélène Seiler,
Fabio Caruso,
Daniela Zahn,
Feliciano Giustino,
Pantelis C. Kelires,
Ralph Ernstorfer
Abstract:
Inelastic scattering experiments are key methods for map** the full dispersion of fundamental excitations of solids in the ground as well as non-equilibrium states. A quantitative analysis of inelastic scattering in terms of phonon excitations requires identifying the role of multi-phonon processes. Here, we develop an efficient first-principles methodology for calculating the all-phonon quantum…
▽ More
Inelastic scattering experiments are key methods for map** the full dispersion of fundamental excitations of solids in the ground as well as non-equilibrium states. A quantitative analysis of inelastic scattering in terms of phonon excitations requires identifying the role of multi-phonon processes. Here, we develop an efficient first-principles methodology for calculating the all-phonon quantum mechanical structure factor of solids. We demonstrate our method by obtaining excellent agreement between measurements and calculations of the diffuse scattering patterns of black phosphorus, showing that multi-phonon processes play a substantial role. The present approach constitutes a step towards the interpretation of static and time-resolved electron, X-ray, and neutron inelastic scattering data.
△ Less
Submitted 22 September, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Temperature dependence of the optical properties of silicon nanocrystals
Authors:
Marios Zacharias,
Pantelis C. Kelires
Abstract:
Silicon nanocrystals (SiNCs) have been under active investigation in the last decades and have been considered as a promising candidate for many optoelectronic applications including highly-efficient solar cells. Some of the fundamental properties of interest in these nanostructures is the temperature dependence of their optical absorption onset, and how this is controlled by different passivation…
▽ More
Silicon nanocrystals (SiNCs) have been under active investigation in the last decades and have been considered as a promising candidate for many optoelectronic applications including highly-efficient solar cells. Some of the fundamental properties of interest in these nanostructures is the temperature dependence of their optical absorption onset, and how this is controlled by different passivation regimes. In the present work we employ first-principles calculations in conjunction with the special displacement method to study the temperature dependence of the band gap renormalization of free-standing hydrogen-terminated, and oxidized SiNCs, as well as matrix-embedded SiNCs in amorphous silica, and we obtain good agreement with experimental photoluminescence data. We also provide strong evidence that the electron-phonon interplay at the surface of the nanocrystal is suppressed by oxidation and the surrounding amorphous matrix. For the matrix-embedded SiNCs, we show a high correlation between the temperature dependence of the band gap and the Si-Si strained bonds. This result emphasizes the immanent relationship of electron-phonon coupling and thermal structural distortions. We also demonstrate that, apart from quantum confinement, Si- Si strained bonds are the major cause of zero-phonon quasidirect transitions in matrix-embedded SiNCs. As a final point, we clarify that, unlike optical absorption in bulk Si, phonon-assisted electronic transitions play a secondary role in SiNCs.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Carbon-based nanostructured composite films: elastic, mechanical and optoelectronic properties derived from computer simulations
Authors:
Maria Fyta,
Christos Mathioudakis,
Ioannis N. Remediakis,
Pantelis C. Kelires
Abstract:
In this review, we present our recent computational work on carbon-based nanostructured composites. These materials consist of carbon crystallites embedded in an amorphous carbon matrix and are modeled here through classical and semi-empirical quantum-mechanical simulations. We investigate the energetics, mechano-elastic, and optoelectronic properties of these materials. Once the stability of the…
▽ More
In this review, we present our recent computational work on carbon-based nanostructured composites. These materials consist of carbon crystallites embedded in an amorphous carbon matrix and are modeled here through classical and semi-empirical quantum-mechanical simulations. We investigate the energetics, mechano-elastic, and optoelectronic properties of these materials. Once the stability of the composites is discussed, we move on to the calculation of their elastic moduli and constants, their anisotropy and elastic recovery. At a next step, we focus on diamond composites, which were found to be the most stable among the composites studied, and went beyond the elastic regime to investigate their ideal fracture. Finally, for these materials, the electronic density of states, dielectric function, and optical response were calculated and linked to the disorder in the structures. Our findings unveil the high potential of these materials in nanotechnological applications, especially as ultlra-hard coatings.
△ Less
Submitted 28 February, 2011;
originally announced February 2011.
-
Reverse Hall-Petch effect in ultra nanocrystalline diamond
Authors:
Ioannis N. Remediakis,
Georgios Kopidakis,
Pantelis C. Kelires
Abstract:
We present atomistic simulations for the mechanical response of ultra nanocrystalline diamond, a polycrystalline form of diamond with grain diameters of the order of a few nm. We consider fully three-dimensional model structures, having several grains of random sizes and orientations, and employ state-of-the-art Monte Carlo simulations. We calculate structural properties, elastic constants and t…
▽ More
We present atomistic simulations for the mechanical response of ultra nanocrystalline diamond, a polycrystalline form of diamond with grain diameters of the order of a few nm. We consider fully three-dimensional model structures, having several grains of random sizes and orientations, and employ state-of-the-art Monte Carlo simulations. We calculate structural properties, elastic constants and the hardness of the material; our results compare well with experimental observations for this material. Moreover, we verify that this material becomes softer at small grain sizes, in analogy to the observed reversal of the Hall-Petch effect in various nanocrystalline metals. The effect is attributed to the large concentration of grain boundary atoms at smaller grain sizes. Our analysis yields scaling relations for the elastic constants as a function of the average grain size.
△ Less
Submitted 16 July, 2008;
originally announced July 2008.
-
Softening of ultra-nanocrystalline diamond at low grain sizes
Authors:
Ioannis N. Remediakis,
Georgios Kopidakis,
Pantelis C. Kelires
Abstract:
Ultra-nanocrystalline diamond is a polycrystalline material, having crystalline diamond grains of sizes in the nanometer regime. We study the structure and mechanical properties of this material as a function of the average grain size, employing atomistic simulations. From the calculated elastic constants and the estimated hardness, we observe softening of the material as the size of its grains…
▽ More
Ultra-nanocrystalline diamond is a polycrystalline material, having crystalline diamond grains of sizes in the nanometer regime. We study the structure and mechanical properties of this material as a function of the average grain size, employing atomistic simulations. From the calculated elastic constants and the estimated hardness, we observe softening of the material as the size of its grains decreases. We attribute the observed softening to the enhanced fraction of interfacial atoms as the average grain size becomes smaller. We provide a fitting formula for the scaling of the cohesive energy and bulk modulus with respect to the average grain size. We find that they both scale as quadratic polynomials of the inverse grain size. Our formulae yield correct values for bulk diamond in the limit of large grain sizes.
△ Less
Submitted 15 July, 2008;
originally announced July 2008.
-
Simulations on the elastic response of amorphous and nanocomposite carbon
Authors:
Maria Fyta,
P. C. Kelires
Abstract:
Theoretical calculations of the elastic response of carbon composites and amorphous carbon are reported. The studied composites consist of crystalline nanoinclusions, either spherical diamonds or carbon nanotubes, embedded in amorphous carbon matrices. The elastic constants of the composites were calculated and found to systematically increase as the density increases. The elastic recovery under…
▽ More
Theoretical calculations of the elastic response of carbon composites and amorphous carbon are reported. The studied composites consist of crystalline nanoinclusions, either spherical diamonds or carbon nanotubes, embedded in amorphous carbon matrices. The elastic constants of the composites were calculated and found to systematically increase as the density increases. The elastic recovery under hydrostatic pressure for all structures was also investigated and was found to be significantly high for both nanocomposite and amorphous carbon, but decreases as the material becomes more dilute.
△ Less
Submitted 2 March, 2007;
originally announced March 2007.
-
Probing the sp^2 dependence of elastic moduli in ultrahard diamond films
Authors:
Maria Fyta,
G. C. Hadjisavvas,
P. C. Kelires
Abstract:
The structural and elastic properties of diamond nanocomposites and ultrananocrystalline diamond films (UNCD) are investigated using both empirical potentials and tight binding schemes. We find that both materials are extremely hard, but their superb diamondlike properties are limited by their sp^2 component. In diamond composites, the sp^2 atoms are found in the matrix and far from the interfac…
▽ More
The structural and elastic properties of diamond nanocomposites and ultrananocrystalline diamond films (UNCD) are investigated using both empirical potentials and tight binding schemes. We find that both materials are extremely hard, but their superb diamondlike properties are limited by their sp^2 component. In diamond composites, the sp^2 atoms are found in the matrix and far from the interface with the inclusion, and they are responsible for the softening of the material. In UNCD, the sp^2 atoms are located in the grain boundaries. They offer relaxation mechanisms which relieve the strain but, on the other hand, impose deformations that lead to softening. The higher the sp^2 component the less rigid these materials are.
△ Less
Submitted 20 February, 2007;
originally announced February 2007.
-
Structure, elastic properties and strength of amorphous and nanocomposite carbon
Authors:
Ioannis N. Remediakis,
Maria G. Fyta,
Christos Mathioudakis,
Georgios Kopidakis,
Pantelis C. Kelires
Abstract:
We study theoretically the equilibrium structure, as well as the response under external load, of characteristic carbon-based materials. The materials considered include diamond, amorphous carbon (a-C), ``amorphous diamond'' and nanocomposite amorphous carbon (na-C). A universal bulk-modulus versus density curve is obeyed by all structures we consider. We calculate the dependence of elastic cons…
▽ More
We study theoretically the equilibrium structure, as well as the response under external load, of characteristic carbon-based materials. The materials considered include diamond, amorphous carbon (a-C), ``amorphous diamond'' and nanocomposite amorphous carbon (na-C). A universal bulk-modulus versus density curve is obeyed by all structures we consider. We calculate the dependence of elastic constants on the density. The strength of a-C was found to increase in roughly a linear manner, with increasing concentration of four-fold atoms, with the maximum stress of the strongest a-C sample being about half that of diamond. The response of na-C to external load is essentially identical to the response of the embedding a-C matrix.
△ Less
Submitted 14 November, 2006;
originally announced November 2006.
-
Probing the Structure and Energetics of Dislocation Cores in SiGe Alloys through Monte Carlo Simulations
Authors:
Ioannis N. Remediakis,
David E. Jesson,
Pantelis C. Kelires
Abstract:
We present a methodology for the investigation of dislocation energetics in segregated alloys based on Monte Carlo simulations which equilibrate the topology and composition of the dislocation core and its surroundings. An environment-dependent partitioning of the system total energy into atomic contributions allows us to link the atomistic picture to continuum elasticity theory. The method is a…
▽ More
We present a methodology for the investigation of dislocation energetics in segregated alloys based on Monte Carlo simulations which equilibrate the topology and composition of the dislocation core and its surroundings. An environment-dependent partitioning of the system total energy into atomic contributions allows us to link the atomistic picture to continuum elasticity theory. The method is applied to extract core energies and radii of 60 degrees glide dislocations in segregated SiGe alloys which are inaccessible by other methods.
△ Less
Submitted 14 November, 2006;
originally announced November 2006.
-
Insights into the fracture mechanisms and strength of amorphous and nanocomposite carbon
Authors:
Maria G. Fyta,
Ioannis N. Remediakis,
Pantelis C. Kelires,
Dimitrios A. Papaconstantopoulos
Abstract:
Tight-binding molecular dynamics simulations shed light into the fracture mechanisms and the ideal strength of tetrahedral amorphous carbon and of nanocomposite carbon containing diamond crystallites, two of the hardest materials. It is found that fracture in the nanocomposites, under tensile or shear load, occurs inter-grain and so their ideal strength is similar to the pure amorphous phase. Th…
▽ More
Tight-binding molecular dynamics simulations shed light into the fracture mechanisms and the ideal strength of tetrahedral amorphous carbon and of nanocomposite carbon containing diamond crystallites, two of the hardest materials. It is found that fracture in the nanocomposites, under tensile or shear load, occurs inter-grain and so their ideal strength is similar to the pure amorphous phase. The onset of fracture takes place at weakly bonded sp^3 sites in the amorphous matrix. On the other hand, the nanodiamond inclusions significantly enhance the elastic moduli, which approach those of diamond.
△ Less
Submitted 15 May, 2006;
originally announced May 2006.
-
Structure, stability and stress properties of amorphous and nanostructured carbon films
Authors:
Maria G. Fyta,
Christos Mathioudakis,
Georgios Kopidakis,
Pantelis C. Kelires
Abstract:
Structural and mechanical properties of amorphous and nanocomposite carbon are investigated using tight-binding molecular dynamics and Monte Carlo simulations. In the case of amorphous carbon, we show that the variation of sp^3 fraction as a function of density is linear over the whole range of possible densities, and that the bulk moduli follow closely the power-law variation suggested by Thorp…
▽ More
Structural and mechanical properties of amorphous and nanocomposite carbon are investigated using tight-binding molecular dynamics and Monte Carlo simulations. In the case of amorphous carbon, we show that the variation of sp^3 fraction as a function of density is linear over the whole range of possible densities, and that the bulk moduli follow closely the power-law variation suggested by Thorpe. We also review earlier work pertained to the intrinsic stress state of tetrahedral amorphous carbon. In the case of nanocomposites, we show that the diamond inclusions are stable only in dense amorphous tetrahedral matrices. Their hardness is considerably higher than that of pure amorphous carbon films. Fully relaxed diamond nanocomposites possess zero average intrinsic stress.
△ Less
Submitted 15 May, 2006;
originally announced May 2006.
-
Computer Simulations of Carbon Nanostructures under Pressure
Authors:
Maria G. Fyta,
Pantelis C. Kelires
Abstract:
Several interesting phenomena are observed when materials are put under pressure. The goal is to achieve modification and control over their mechanical and electronic (conduction) properties. Within this spirit, we have recently focused our attention into how carbon nanostructures respond to hydrostatic pressure. We performed Monte Carlo simulations with the Tersoff potential of various free-sta…
▽ More
Several interesting phenomena are observed when materials are put under pressure. The goal is to achieve modification and control over their mechanical and electronic (conduction) properties. Within this spirit, we have recently focused our attention into how carbon nanostructures respond to hydrostatic pressure. We performed Monte Carlo simulations with the Tersoff potential of various free-standing carbon nanostructures. These range from fullerenes, onions and carbon spheres to nanotubes and nanodiamonds. Our simulations show that the nanostructures undergo some notable structural modifications.
△ Less
Submitted 12 May, 2006;
originally announced May 2006.
-
Stress variations near surfaces in diamond-like amorphous carbon
Authors:
Maria Fyta,
Pantelis C. Kelires
Abstract:
Using Monte Carlo simulations within the empirical potential approach, we examine the effect produced by the surface environment on the atomic level stresses in tetrahedral amorphous carbon. Both the distribution of stresses and the distributions of sp^2 and sp^3 atoms as a function of depth from the surface are highly inhomogeneous. They show the same close relationship between local stress and…
▽ More
Using Monte Carlo simulations within the empirical potential approach, we examine the effect produced by the surface environment on the atomic level stresses in tetrahedral amorphous carbon. Both the distribution of stresses and the distributions of sp^2 and sp^3 atoms as a function of depth from the surface are highly inhomogeneous. They show the same close relationship between local stress and bonding hybridization found previously in the bulk of the material. Compressive local stress favors the formation of sp^3 sites, while tensile stress favors the formation of sp^2 sites.
△ Less
Submitted 11 May, 2006;
originally announced May 2006.
-
Energetics and stability of nanostructured amorphous carbon
Authors:
Maria G. Fyta,
Pantelis C. Kelires
Abstract:
Monte Carlo simulations, supplemented by ab initio calculations, shed light into the energetics and thermodynamic stability of nanostructured amorphous carbon. The interaction of the embedded nanocrystals with the host amorphous matrix is shown to determine in a large degree the stability and the relative energy differences among carbon phases. Diamonds are stable structures in matrices with sp^…
▽ More
Monte Carlo simulations, supplemented by ab initio calculations, shed light into the energetics and thermodynamic stability of nanostructured amorphous carbon. The interaction of the embedded nanocrystals with the host amorphous matrix is shown to determine in a large degree the stability and the relative energy differences among carbon phases. Diamonds are stable structures in matrices with sp^3 fraction over 60%. Schwarzites are stable in low-coordinated networks. Other sp^2-bonded structures are metastable.
△ Less
Submitted 11 May, 2006;
originally announced May 2006.
-
Simulations of composite carbon films with nanotube inclusions
Authors:
M. G. Fyta,
P. C. Kelires
Abstract:
We study the interfacial structure, stability, and elastic properties of composite carbon films containing nanotubes. Our Monte Carlo simulations show that Van der Waals forces play a vital role in sha** up the interfacial geometry, producing a curved graphitic wall surrounding the tubes. The most stable structures are predicted to have intermediate densities, high anisotropies, and increased…
▽ More
We study the interfacial structure, stability, and elastic properties of composite carbon films containing nanotubes. Our Monte Carlo simulations show that Van der Waals forces play a vital role in sha** up the interfacial geometry, producing a curved graphitic wall surrounding the tubes. The most stable structures are predicted to have intermediate densities, high anisotropies, and increased elastic moduli compared to pure amorphous carbon films.
△ Less
Submitted 18 April, 2005;
originally announced April 2005.
-
Thermodynamics of C incorporation on Si(100) from ab initio calculations
Authors:
I. N. Remediakis,
Efthimios Kaxiras,
P. C. Kelires
Abstract:
We study the thermodynamics of C incorporation on Si(100), a system where strain and chemical effects are both important. Our analysis is based on first-principles atomistic calculations to obtain the important lowest energy structures, and a classical effective Hamiltonian which is employed to represent the long-range strain effects and incorporate the thermodynamic aspects. We determine the eq…
▽ More
We study the thermodynamics of C incorporation on Si(100), a system where strain and chemical effects are both important. Our analysis is based on first-principles atomistic calculations to obtain the important lowest energy structures, and a classical effective Hamiltonian which is employed to represent the long-range strain effects and incorporate the thermodynamic aspects. We determine the equilibrium phase diagram in temperature and C chemical potential, which allows us to predict the mesoscopic structure of the system that should be observed under experimentally relevant conditions.
△ Less
Submitted 7 August, 2000;
originally announced August 2000.
