-
Unveiling the Journey of a Highly Inclined CME: Insights from the March 13, 2012 Event with 110$^\circ$ Longitudinal Separation
Authors:
F. Carcaboso,
M. Dumbovic,
C. Kay,
D. Lario,
L. K. Jian,
L. B. Wilson III,
R. Gómez-Herrero,
M. Temmer,
S. G. Heinemann,
T. Nieves-Chinchilla,
A. M. Veronig
Abstract:
A fast and wide Coronal Mass Ejection (CME) erupted from the Sun on 2012-03-13. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft. We suggest that at 1 au the CME extended at least 110$^\circ$ in longitude, with Earth crossing its east flank and STEREO-A crossing its west flank. Despite their separation, measurements from both positions showed…
▽ More
A fast and wide Coronal Mass Ejection (CME) erupted from the Sun on 2012-03-13. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft. We suggest that at 1 au the CME extended at least 110$^\circ$ in longitude, with Earth crossing its east flank and STEREO-A crossing its west flank. Despite their separation, measurements from both positions showed very similar in situ CME signatures. The solar source region where the CME erupted was surrounded by three coronal holes (CHs). Their locations with respect to the CME launch site were east (negative polarity), southwest (positive polarity) and west (positive polarity). The solar magnetic field polarity of the area covered by each CH matches that observed at 1 au in situ. Suprathermal electrons at each location showed mixed signatures with only some intervals presenting clear counterstreaming flows as the CME transits both locations. The strahl population coming from the shortest magnetic connection of the structure to the Sun showed more intensity. The study presents important findings regarding the in situ measured CME on 2012-03-15, detected at a longitudinal separation of 110$^\circ$ in the ecliptic plane despite its initial inclination being around 45$^\circ$ when erupted. This suggests that the CME may have deformed and/or rotated, allowing it to be observed near its legs with spacecraft at a separation angle greater than 100$^\circ$. The CME structure interacted with high-speed streams generated by the surrounding CHs. The piled-up plasma in the sheath region exhibited an unexpected correlation in magnetic field strength despite the large separation in longitude. In situ observations reveal that at both locations there was a flank encounter, where the spacecraft crossed the first part of the CME, then encountered ambient solar wind, and finally passed near the legs of the structure.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Collection, Collation, and Comparison of 3D Coronal CME Reconstructions
Authors:
C. Kay,
E. Palmerio
Abstract:
Predicting the impacts of coronal mass ejections (CMEs) is a major focus of current space weather forecasting efforts. Typically, CME properties are reconstructed from stereoscopic coronal images and then used to forward model a CME's interplanetary evolution. Knowing the uncertainty in the coronal reconstructions is then a critical factor in determining the uncertainty of any predictions. A growi…
▽ More
Predicting the impacts of coronal mass ejections (CMEs) is a major focus of current space weather forecasting efforts. Typically, CME properties are reconstructed from stereoscopic coronal images and then used to forward model a CME's interplanetary evolution. Knowing the uncertainty in the coronal reconstructions is then a critical factor in determining the uncertainty of any predictions. A growing number of catalogs of coronal CME reconstructions exist, but no extensive comparison between these catalogs has yet been performed. Here we develop a Living List of Attributes Measured in Any Coronal Reconstruction (LLAMACoRe), an online collection of individual catalogs, which we intend to continually update. In this first version, we use results from 24 different catalogs with 3D reconstructions using STEREO observations between 2007--2014. We have collated the individual catalogs, determining which reconstructions correspond to the same events. LLAMACoRe contains 2954 reconstructions for 1862 CMEs. Of these, 511 CMEs contain multiple reconstructions from different catalogs. Using the best-constrained values for each CME, we find that the combined catalog reproduces the generally known solar cycle trends. We determine the typical difference we would expect between two independent reconstructions of the same event and find values of 4.0 deg in the latitude, 8.0 deg in the longitude, 24.0 deg in the tilt, 9.3 deg in the angular width, 0.1 in the shape parameter kappa, 115 km/s in the velocity, and 2.5e15 g in the mass. These remain the most probable values over the solar cycle, though we find more extreme outliers in the deviation toward solar maximum.
△ Less
Submitted 5 January, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
New Observations Needed to Advance Our Understanding of Coronal Mass Ejections
Authors:
Erika Palmerio,
Benjamin J. Lynch,
Christina O. Lee,
Lan K. Jian,
Teresa Nieves-Chinchilla,
Emma E. Davies,
Brian E. Wood,
Noé Lugaz,
Réka M. Winslow,
Tibor Török,
Nada Al-Haddad,
Florian Regnault,
Meng **,
Camilla Scolini,
Fernando Carcaboso,
Charles J. Farrugia,
Vincent E. Ledvina,
Cooper Downs,
Christina Kay,
Sanchita Pal,
Tarik M. Salman,
Robert C. Allen
Abstract:
Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and th…
▽ More
Coronal mass ejections (CMEs) are large eruptions from the Sun that propagate through the heliosphere after launch. Observational studies of these transient phenomena are usually based on 2D images of the Sun, corona, and heliosphere (remote-sensing data), as well as magnetic field, plasma, and particle samples along a 1D spacecraft trajectory (in-situ data). Given the large scales involved and the 3D nature of CMEs, such measurements are generally insufficient to build a comprehensive picture, especially in terms of local variations and overall geometry of the whole structure. This White Paper aims to address this issue by identifying the data sets and observational priorities that are needed to effectively advance our current understanding of the structure and evolution of CMEs, in both the remote-sensing and in-situ regimes. It also provides an outlook of possible missions and instruments that may yield significant improvements into the subject.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Trajectories of Coronal Mass Ejection from Solar-type Stars
Authors:
Fabian Menezes,
Adriana Valio,
Yuri Netto,
Alexandre Araújo,
Christina Kay,
Merav Opher
Abstract:
The Sun and other solar-type stars have magnetic fields that permeate their interior and surface, extends through the interplanetary medium, and is the main driver of stellar activity. Stellar magnetic activity affects physical processes and conditions of the interplanetary medium and orbiting planets. Coronal mass ejections (CMEs) are the most impacting of these phenomena in near-Earth space weat…
▽ More
The Sun and other solar-type stars have magnetic fields that permeate their interior and surface, extends through the interplanetary medium, and is the main driver of stellar activity. Stellar magnetic activity affects physical processes and conditions of the interplanetary medium and orbiting planets. Coronal mass ejections (CMEs) are the most impacting of these phenomena in near-Earth space weather, and consist of plasma clouds, with magnetic field, ejected from the solar corona. Precisely predicting the trajectory of CMEs is crucial in determining whether a CME will hit a planet and impact its magnetosphere and atmosphere. Despite the rapid developments in the search for stellar CMEs, their detection is still very incipient. In this work we aim to better understand the propagation of CMEs by analysing the influence of initial parameters on CME trajectories, such as position, velocities, and stellar magnetic field's configuration. We reconstruct magnetograms for Kepler-63 (KIC 11554435) and Kepler-411 (KIC 11551692) from spot transit map**, and use a CME deflection model, ForeCAT, to simulate trajectories of hypothetical CMEs launched into the interplanetary medium from Kepler-63 and Kepler-411. We apply the same methodology to the Sun, for comparison. Our results show that in general, deflections and rotations of CMEs decrease with their radial velocity, and increase with ejection latitude. Moreover, magnetic fields stronger than the Sun's, such as Kepler-63's, tend to cause greater CME deflections.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Modeling CME encounters at Parker Solar Probe with OSPREI: Dependence on photospheric and coronal conditions
Authors:
Vincent E. Ledvina,
Erika Palmerio,
Christina Kay,
Nada Al-Haddad,
Pete Riley
Abstract:
Context: Coronal mass ejections (CMEs) are eruptions of plasma from the Sun that travel through interplanetary space and may encounter Earth. CMEs often enclose a magnetic flux rope (MFR), the orientation of which largely determines the CME's geoeffectiveness. Current operational CME models do not model MFRs, but a number of research ones do, including the Open Solar Physics Rapid Ensemble Informa…
▽ More
Context: Coronal mass ejections (CMEs) are eruptions of plasma from the Sun that travel through interplanetary space and may encounter Earth. CMEs often enclose a magnetic flux rope (MFR), the orientation of which largely determines the CME's geoeffectiveness. Current operational CME models do not model MFRs, but a number of research ones do, including the Open Solar Physics Rapid Ensemble Information (OSPREI) model. Aims: We report the sensitivity of OSPREI to a range of user-selected photospheric and coronal conditions. Methods: We model four separate CMEs observed in situ by Parker Solar Probe (PSP). We vary the input photospheric conditions using four input magnetograms (HMI Synchronic, HMI Synoptic, GONG Synoptic Zero-Point Corrected, and GONG ADAPT). To vary the coronal field reconstruction, we employ the Potential-Field Source-Surface (PFSS) model and we vary its source-surface height in the range 1.5--3.0 R$_{\odot}$ with 0.1 R$_{\odot}$ increments. Results: We find that both the input magnetogram and PFSS source surface often affect the evolution of the CME as it propagates through the Sun's corona into interplanetary space, and therefore the accuracy of the MFR prediction compared to in-situ data at PSP. There is no obvious best combination of input magnetogram and PFSS source surface height. Conclusions: The OSPREI model is moderately sensitive to the input photospheric and coronal conditions. Based on where the source region of the CME is located on the Sun, there may be best practices when selecting an input magnetogram to use.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
The Multiview Observatory for Solar Terrestrial Science (MOST)
Authors:
N. Gopalswamy,
S. Christe,
S. F. Fung,
Q. Gong,
J. R. Gruesbeck,
L. K. Jian,
S. G. Kanekal,
C. Kay,
T. A. Kucera,
J. E. Leake,
L. Li,
P. Makela,
P. Nikulla,
N. L. Reginald,
A. Shih,
S. K. Tadikonda,
N. Viall,
L. B. Wilson III,
S. Yashiro,
L. Golub,
E. DeLuca,
K. Reeves,
A. C. Sterling,
A. R. Winebarger,
C. DeForest
, et al. (32 additional authors not shown)
Abstract:
We report on a study of the Multiview Observatory for Solar Terrestrial Science (MOST) mission that will provide comprehensive imagery and time series data needed to understand the magnetic connection between the solar interior and the solar atmosphere/inner heliosphere. MOST will build upon the successes of SOHO and STEREO missions with new views of the Sun and enhanced instrument capabilities. T…
▽ More
We report on a study of the Multiview Observatory for Solar Terrestrial Science (MOST) mission that will provide comprehensive imagery and time series data needed to understand the magnetic connection between the solar interior and the solar atmosphere/inner heliosphere. MOST will build upon the successes of SOHO and STEREO missions with new views of the Sun and enhanced instrument capabilities. This article is based on a study conducted at NASA Goddard Space Flight Center that determined the required instrument refinement, spacecraft accommodation, launch configuration, and flight dynamics for mission success. MOST is envisioned as the next generation great observatory positioned to obtain three-dimensional information of large-scale heliospheric structures such as coronal mass ejections, stream interaction regions, and the solar wind itself. The MOST mission consists of 2 pairs of spacecraft located in the vicinity of Sun-Earth Lagrange points L4 (MOST1, MOST3) and L5 (MOST2 and MOST4). The spacecraft stationed at L4 (MOST1) and L5 (MOST2) will each carry seven remote-sensing and three in-situ instrument suites, including a novel radio package known as the Faraday Effect Tracker of Coronal and Heliospheric structures (FETCH). MOST3 and MOST4 will carry only the FETCH instruments and are positioned at variable locations along the Earth orbit up to 20° ahead of L4 and 20° behind L5, respectively. FETCH will have polarized radio transmitters and receivers on all four spacecraft to measure the magnetic content of solar wind structures propagating from the Sun to Earth using the Faraday rotation technique. The MOST mission will be able to sample the magnetized plasma throughout the Sun-Earth connected space during the mission lifetime over a solar cycle.
△ Less
Submitted 10 December, 2023; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Maser Threshold Characterization by Resonator Q-Factor Tuning
Authors:
Christoph W. Zollitsch,
Stefan Ruloff,
Yan Fett,
Haakon T. A. Wiedemann,
Rudolf Richter,
Jonathan D. Breeze,
Christopher W. M. Kay
Abstract:
Whereas the laser is nowadays an ubiquitous technology, applications for its microwave analogue, the maser, remain highly specialized, despite the excellent low-noise microwave amplification properties. The widespread application of masers is typically limited by the need of cryogenic temperatures. The recent realization of a continuous-wave room-temperature maser, using NV$^-$ centers in diamond,…
▽ More
Whereas the laser is nowadays an ubiquitous technology, applications for its microwave analogue, the maser, remain highly specialized, despite the excellent low-noise microwave amplification properties. The widespread application of masers is typically limited by the need of cryogenic temperatures. The recent realization of a continuous-wave room-temperature maser, using NV$^-$ centers in diamond, is a first step towards establishing the maser as a potential platform for microwave research and development, yet its design is far from optimal. Here, we design and construct an optimized setup able to characterize the operating space of a maser using NV$^-$ centers. We focus on the interplay of two key parameters for emission of microwave photons: the quality factor of the microwave resonator and the degree of spin level-inversion. We characterize the performance of the maser as a function of these two parameters, identifying the parameter space of operation and highlighting the requirements for maximal continuous microwave emission.
△ Less
Submitted 7 December, 2023; v1 submitted 21 February, 2023;
originally announced February 2023.
-
Quantifying errors in 3D CME parameters derived from synthetic data using white-light reconstruction techniques
Authors:
Christine Verbeke,
M. Leila Mays,
Christina Kay,
Pete Riley,
Erika Palmerio,
Mateja Dumbović,
Marilena Mierla,
Camilla Scolini,
Manuela Temmer,
Evangelos Paouris,
Laura A. Balmaceda,
Hebe Cremades,
Jürgen Hinterreiter
Abstract:
(Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields a…
▽ More
(Shortened version) Current efforts in space weather forecasting of CMEs have been focused on predicting their arrival time and magnetic structure. To make predictions, methods have been developed to derive the true CME speed, size and position, among others. Difficulties in determining input parameters for CME forecasting arise from the lack of direct measurements of the coronal magnetic fields and uncertainties in estimating the CME 3D geometric and kinematic parameters. White-light coronagraph images are usually employed by a variety of CME reconstruction techniques. We explore how subjectivity affects the 3D CME parameters that are obtained from the GCS reconstruction technique. We have designed two different synthetic scenarios where the ``true'' geometric parameters are known in order to quantify such uncertainties for the first time. We explore this as follows: 1) Using the ray-tracing option from the GCS model software, and 2) Using 3D MHD simulation data from the MAS code. Our experiment includes different viewing configurations using single and multiple viewpoints. CME reconstructions using a single viewpoint had the largest errors and error ranges for both synthetic GCS and simulated MHD white-light data. Increasing the number of viewpoints to two, the errors decreased by about 4$^\circ$ in latitude, 22$^\circ$ in longitude, 14$^\circ$ in tilt, and 10$^\circ$ in half-angle, pointing towards a need for at least two viewpoints. We found the following CME parameter error bars as a starting point for quantifying the minimum error in CME parameters from white-light reconstructions: $Δθ$ (latitude)=${6^\circ}$, $Δφ$ (longitude)=${11^\circ}$, $Δγ$ (tilt)=${25^\circ}$, $Δα$ (half-angle)=${10^\circ}$, $Δh$ (height)=$0.6 R_{\odot}$, and $Δκ$ (ratio)=$0.1$.
△ Less
Submitted 2 February, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
OSPREI: A Coupled Approach to Modeling CME-Driven Space Weather with Automatically-Generated, User-Friendly Outputs
Authors:
C. Kay,
M. L. Mays,
Y. M. Collado-Vega
Abstract:
Coronal Mass Ejections (CMEs) drive space weather activity at Earth and throughout the solar system. Current CME-related space weather predictions rely on information reconstructed from coronagraphs, sometimes from only a single viewpoint, to drive a simple interplanetary propagation model, which only gives the arrival time or limited additional information. We present the coupling of three establ…
▽ More
Coronal Mass Ejections (CMEs) drive space weather activity at Earth and throughout the solar system. Current CME-related space weather predictions rely on information reconstructed from coronagraphs, sometimes from only a single viewpoint, to drive a simple interplanetary propagation model, which only gives the arrival time or limited additional information. We present the coupling of three established models into OSPREI (Open Solar Physics Rapid Ensemble Information), a new tool that describes Sun-to-Earth CME behavior, including the location, orientation, size, shape, speed, arrival time, and internal thermal and magnetic properties, on the timescale needed for forecasts. First, ForeCAT describes the trajectory that a CME takes through the solar corona. Second, ANTEATR simulates the propagation, including expansion and deformation, of a CME in interplanetary space and determines the evolution of internal properties via conservation laws. Finally, FIDO produces in situ profiles for a CME's interaction with a synthetic spacecraft. OSPREI includes ensemble modeling by varying each input parameter to probe any uncertainty in their values, yielding probabilities for all outputs. Standardized visualizations are automatically generated, providing easily-accessible, essential information for space weather forecasting. We show OSPREI results for CMEs observed in the corona on 2021 April 22 and 2021 May 09. We approach these CME as a forecasting proof-of-concept, using information analogous to what would be available in real time rather than fine-tuning input parameters to achieve a best fit for a detailed scientific study. The OSPREI prediction shows good agreement with the arrival time and in situ properties.
△ Less
Submitted 30 November, 2021; v1 submitted 14 September, 2021;
originally announced September 2021.
-
Predicting the Magnetic Fields of a Stealth CME Detected by Parker Solar Probe at 0.5 AU
Authors:
Erika Palmerio,
Christina Kay,
Nada Al-Haddad,
Benjamin J. Lynch,
Wenyuan Yu,
Michael L. Stevens,
Sanchita Pal,
Christina O. Lee
Abstract:
Stealth coronal mass ejection (CMEs) are eruptions from the Sun that are not associated with appreciable low-coronal signatures. Because they often cannot be linked to a well-defined source region on the Sun, analysis of their initial magnetic configuration and eruption dynamics is particularly problematic. In this manuscript, we address this issue by undertaking the first attempt at predicting th…
▽ More
Stealth coronal mass ejection (CMEs) are eruptions from the Sun that are not associated with appreciable low-coronal signatures. Because they often cannot be linked to a well-defined source region on the Sun, analysis of their initial magnetic configuration and eruption dynamics is particularly problematic. In this manuscript, we address this issue by undertaking the first attempt at predicting the magnetic fields of a stealth CME that erupted in 2020 June from the Earth-facing Sun. We estimate its source region with the aid of off-limb observations from a secondary viewpoint and photospheric magnetic field extrapolations. We then employ the Open Solar Physics Rapid Ensemble Information (OSPREI) modelling suite to evaluate its early evolution and forward-model its magnetic fields up to Parker Solar Probe, which detected the CME in situ at a heliocentric distance of 0.5 AU. We compare our hindcast prediction with in-situ measurements and a set of flux rope reconstructions, obtaining encouraging agreement on arrival time, spacecraft crossing location, and magnetic field profiles. This work represents a first step towards reliable understanding and forecasting of the magnetic configuration of stealth CMEs and slow, streamer-blowout events.
△ Less
Submitted 10 September, 2021;
originally announced September 2021.
-
SunCET: A compact EUV instrument to fill a critical observational gap
Authors:
James Paul Mason,
Phillip C. Chamberlin,
Daniel Seaton,
Joan Burkepile,
Robin Colaninno,
Karin Dissauer,
Francis G. Eparvier,
Yuhong Fan,
Sarah Gibson,
Andrew R. Jones,
Christina Kay,
Michael Kirk,
Richard Kohnert,
W. Dean Pesnell,
Barbara J. Thompson,
Astrid M. Veronig,
Matthew J. West,
David Windt,
Thomas N. Woods
Abstract:
The Sun Coronal Ejection Tracker (SunCET) is an extreme ultraviolet imager and spectrograph instrument concept for tracking coronal mass ejections through the region where they experience the majority of their acceleration: the difficult-to-observe middle corona. It contains a wide field of view (0-4~\Rs) imager and a 1~Å spectral-resolution-irradiance spectrograph spanning 170-340~Å. It leverages…
▽ More
The Sun Coronal Ejection Tracker (SunCET) is an extreme ultraviolet imager and spectrograph instrument concept for tracking coronal mass ejections through the region where they experience the majority of their acceleration: the difficult-to-observe middle corona. It contains a wide field of view (0-4~\Rs) imager and a 1~Å spectral-resolution-irradiance spectrograph spanning 170-340~Å. It leverages new detector technology to read out different areas of the detector with different integration times, resulting in what we call "simultaneous high dynamic range", as opposed to the traditional high dynamic range camera technique of subsequent full-frame images that are then combined in post-processing. This allows us to image the bright solar disk with short integration time, the middle corona with a long integration time, and the spectra with their own, independent integration time. Thus, SunCET does not require the use of an opaque or filtered occulter. SunCET is also compact -- $\sim$15 $\times$ 15 $\times$ 10~cm in volume -- making it an ideal instrument for a CubeSat or a small, complementary addition to a larger mission. Indeed, SunCET is presently in a NASA-funded, competitive Phase A as a CubeSat and has also been proposed to NASA as an instrument onboard a 184 kg Mission of Opportunity.
△ Less
Submitted 22 January, 2021;
originally announced January 2021.
-
Modeling Interplanetary Expansion and Deformation of CMEs with ANTEATR-PARADE I: Relative Contribution of Different Forces
Authors:
C. Kay,
T. Nieves-Chinchilla
Abstract:
Coronal Mass Ejections (CMEs) are key drivers of space weather activity but most predictions have been limited to the expected arrival time of a CME, rather than the internal properties that affect the severity of an impact. Many properties, such as the magnetic field density and mass density, follow conservation laws and vary systematically with changes in the size of a CME. We present ANTEATR-PA…
▽ More
Coronal Mass Ejections (CMEs) are key drivers of space weather activity but most predictions have been limited to the expected arrival time of a CME, rather than the internal properties that affect the severity of an impact. Many properties, such as the magnetic field density and mass density, follow conservation laws and vary systematically with changes in the size of a CME. We present ANTEATR-PARADE, the newest version of the ANTEATR arrival time model, which now includes physics-driven changes in the size and shape of both the CME's central axis and its cross section. Internal magnetic and thermal and external drag forces affect the acceleration of the CME in different directions, inducing asymmetries between the radial and perpendicular directions. These improvements should lead to more realistic CME velocities, both bulk and expansion, sizes and shapes, and internal properties. We present the model details, an initial illustration of the general behavior, and a study of the relative importance of the different forces. The model shows a pancaking of both the cross section and central axis of the CME so that their radial extent becomes smaller than their extent in the perpendicular direction. We find that the initial velocities, drag, any form of cross section expansion, and the precise form of thermal expansion have strong effects. The results are less sensitive to axial forces and the specific form of the cross section expansion.
△ Less
Submitted 25 March, 2021; v1 submitted 11 November, 2020;
originally announced November 2020.
-
Frequency of Coronal Mass Ejection Impacts with Early Terrestrial Planets and Exoplanets Around Active Solar-like Stars
Authors:
Christina Kay,
Vladimir S. Airapetian,
Theresa Lüftinger,
Oleg Kochukhov
Abstract:
Energetic flares and associated coronal mass ejections (CMEs) from young magnetically active solar-like stars can play a critical role in setting conditions for atmospheric escape as well aspenetration of accelerated particles into their atmospheres that promotes formation of biologically relevant molecules. We have used the observationally reconstructed magnetic field of the 0.7 Gyr-young Suns tw…
▽ More
Energetic flares and associated coronal mass ejections (CMEs) from young magnetically active solar-like stars can play a critical role in setting conditions for atmospheric escape as well aspenetration of accelerated particles into their atmospheres that promotes formation of biologically relevant molecules. We have used the observationally reconstructed magnetic field of the 0.7 Gyr-young Suns twin, k1 Ceti, to study the effects of CME deflections in the magnetic corona of the young Sun and their effects on the impact frequency on the early Venus, Earth and Mars. We find that the coronal magnetic field deflects the CMEs toward the astrospheric current sheet (ACS). This effect suggests that CMEs tend to propagate within a small cone about the ecliptic plane increasing the impact frequency of CMEs with planetary magnetospheres near this plane to ~ 30 percent or by a factor of 6 as compared to previous estimate by Airapetian et al. 2016. Our model has important implications for the rise of prebiotic chemistry on early terrestrial planets as well as terrestrial type exoplanets around young G-K dwarfs.
△ Less
Submitted 19 November, 2019; v1 submitted 6 November, 2019;
originally announced November 2019.
-
CME -- HSS interaction and characteristics tracked from Sun to Earth
Authors:
Stephan G. Heinemann,
Manuela Temmer,
Charles J. Farrugia,
Karin Dissauer,
Christina Kay,
Thomas Wiegelmann,
Mateja Dumbović,
Astrid M. Veronig,
Tatiana Podladchikova,
Stefan J. Hofmeister,
Noé Lugaz,
Fernando Carcaboso
Abstract:
In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interac…
▽ More
In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interaction with a HSS, which emanates from a coronal hole (CH) close to the launch site of the CME. The results indicate that the major interaction between the CME and the HSS starts at a height of 1.3 Rsun up to 3 Rsun. Over that distance range, the CME undergoes a strong north-eastward deflection of at least 30 degrees due to the open magnetic field configuration of the CH. We perform a comprehensive analysis for the CME-HSS event using multi-viewpoint data (from the Solar TErrestrial RElations Observatories, the Solar and Heliospheric Observatory and the Solar Dynamics Observatory), and combined modeling efforts (nonlinear force-free field modeling, Graduated Cylindrical Shell CME modeling, and the Forecasting a CMEs Altered Trajectory ForeCAT model). We aim at better understanding its early evolution and interaction process as well as its interplanetary propagation and related in situ signatures, and finally the resulting impact on the Earth's magnetosphere.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Impact of Space Weather on Climate and Habitability of Terrestrial Type Exoplanets
Authors:
V. S. Airapetian,
R. Barnes,
O. Cohen,
G. A. Collinson,
W. C. Danchi,
C. F. Dong,
A. D. Del Genio,
K. France,
K. Garcia-Sage,
A. Glocer,
N. Gopalswamy,
J. L. Grenfell,
G. Gronoff,
M. G"udel,
K. Herbst,
W. G. Henning,
C. H. Jackman,
M. **,
C. P. Johnstone,
L. Kaltenegger,
C. D. Kay,
K. Kobayashi,
W. Kuang,
G. Li,
B. J. Lynch
, et al. (21 additional authors not shown)
Abstract:
The current progress in the detection of terrestrial type exoplanets has opened a new avenue in the characterization of exoplanetary atmospheres and in the search for biosignatures of life with the upcoming ground-based and space missions. To specify the conditions favorable for the origin, development and sustainment of life as we know it in other worlds, we need to understand the nature of astro…
▽ More
The current progress in the detection of terrestrial type exoplanets has opened a new avenue in the characterization of exoplanetary atmospheres and in the search for biosignatures of life with the upcoming ground-based and space missions. To specify the conditions favorable for the origin, development and sustainment of life as we know it in other worlds, we need to understand the nature of astrospheric, atmospheric and surface environments of exoplanets in habitable zones around G-K-M dwarfs including our young Sun. Global environment is formed by propagated disturbances from the planet-hosting stars in the form of stellar flares, coronal mass ejections, energetic particles, and winds collectively known as astrospheric space weather. Its characterization will help in understanding how an exoplanetary ecosystem interacts with its host star, as well as in the specification of the physical, chemical and biochemical conditions that can create favorable and/or detrimental conditions for planetary climate and habitability along with evolution of planetary internal dynamics over geological timescales. A key linkage of (astro) physical, chemical, and geological processes can only be understood in the framework of interdisciplinary studies with the incorporation of progress in heliophysics, astrophysics, planetary and Earth sciences. The assessment of the impacts of host stars on the climate and habitability of terrestrial (exo)planets will significantly expand the current definition of the habitable zone to the biogenic zone and provide new observational strategies for searching for signatures of life. The major goal of this paper is to describe and discuss the current status and recent progress in this interdisciplinary field and to provide a new roadmap for the future development of the emerging field of exoplanetary science and astrobiology.
△ Less
Submitted 19 May, 2019; v1 submitted 9 May, 2019;
originally announced May 2019.
-
Reconstructing Extreme Space Weather from Planet Hosting Stars
Authors:
V. S. Airapetian,
V. Adibekyan,
M. Ansdell,
D. Alexander,
T. Bastian,
S. Boro Saikia,
A. S. Brun,
O. Cohen,
M. Cuntz,
W. Danchi,
J. Davenport,
J. DeNolfo,
R. DeVore,
C. F. Dong,
J. J. Drake,
K. France,
F. Fraschetti,
K. Herbst,
K. Garcia-Sage,
M. Gillon,
A. Glocer,
J. L. Grenfell,
G. Gronoff,
N. Gopalswamy,
M. Guedel
, et al. (58 additional authors not shown)
Abstract:
The field of exoplanetary science is making rapid progress both in statistical studies of exoplanet properties as well as in individual characterization. As space missions provide an emerging picture of formation and evolution of exoplanetary systems, the search for habitable worlds becomes one of the fundamental issues to address. To tackle such a complex challenge, we need to specify the conditi…
▽ More
The field of exoplanetary science is making rapid progress both in statistical studies of exoplanet properties as well as in individual characterization. As space missions provide an emerging picture of formation and evolution of exoplanetary systems, the search for habitable worlds becomes one of the fundamental issues to address. To tackle such a complex challenge, we need to specify the conditions favorable for the origin, development and sustainment of life as we know it. This requires the understanding of global (astrospheric) and local (atmospheric, surface and internal) environments of exoplanets in the framework of the physical processes of the interaction between evolving planet-hosting stars along with exoplanetary evolution over geological timescales, and the resulting impact on climate and habitability of exoplanets. Feedbacks between astrophysical, physico-chemical atmospheric and geological processes can only be understood through interdisciplinary studies with the incorporation of progress in heliophysics, astrophysics, planetary, Earth sciences, astrobiology, and the origin of life communities. The assessment of the impacts of host stars on the climate and habitability of terrestrial (exo)planets and potential exomoons around them may significantly modify the extent and the location of the habitable zone and provide new directions for searching for signatures of life. Thus, characterization of stellar ionizing outputs becomes an important task for further understanding the extent of habitability in the universe. The goal of this white paper is to identify and describe promising key research goals to aid the theoretical characterization and observational detection of ionizing radiation from quiescent and flaring upper atmospheres of planet hosts as well as properties of stellar coronal mass ejections and stellar energetic particle events.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
Magnetic Field Magnitude Modification for a Force-free Magnetic Cloud Model
Authors:
R. P. Lep**,
C. -C. Wu,
D. B. Berdichevsky,
C. Kay
Abstract:
A scheme was developed by Lep**, Berdichevsky, and Wu (Solar Phys., doi.10. 1007/ s11207-016-1040-9, 2017) [called the LBW article here] to approximate the average magnetic field magnitude (B-) profile of a "typical" magnetic cloud (MC) at/near 1AU. It was based on actual Wind MC data, taken over 21 years, that was used to modify a time shifted Bessel function (force-free) magnetic field, where…
▽ More
A scheme was developed by Lep**, Berdichevsky, and Wu (Solar Phys., doi.10. 1007/ s11207-016-1040-9, 2017) [called the LBW article here] to approximate the average magnetic field magnitude (B-) profile of a "typical" magnetic cloud (MC) at/near 1AU. It was based on actual Wind MC data, taken over 21 years, that was used to modify a time shifted Bessel function (force-free) magnetic field, where shifted refers to a field that was adjusted for typical MC self-similar expansion. This was developed in the context of the Lep**, Jones, and Burlaga (J. Geophys. Res. vol. 95, p.11957, 1990) [called LJB here] MC parameter fitting model and should provide more realistic future representations of the MC's B-profile in most cases. In the LBW article, through testing, it was shown that on average it can be expected that in about 80% of the MC cases (but it varies according to the spacecrafts' actual closest approach distances) the modified model's B-profile of the MC should be significantly improved by use of this scheme. We describe how this scheme can be employed practically in modifying the LJB MC fitting model, and we test a new and slightly better (and less unwieldy) version of the scheme, the non-shifted (of Bessel functions) version, which is the one actually used in the LJB model modification. The new scheme is based on modification formulae that are slightly more accurate than the old scheme, and it is expected to improve the B-profile in approximately 83% of the cases on average. The schemes are applicable for use with data originating only at/near 1 AU, since the magnetic field and plasma data used in the development of the associated formulae were from only the Wind spacecraft, which was and is at 1 AU.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Life Beyond the Solar System: Space Weather and Its Impact on Habitable Worlds
Authors:
V. S. Airapetian,
W. C. Danchi,
C. F. Dong,
S. Rugheimer,
M. Mlynczak,
K. B. Stevenson,
W. G. Henning,
J. L. Grenfell,
M. **,
A. Glocer,
G. Gronoff,
B. Lynch,
C. Johnstone,
T. Lueftinger,
M. Guedel,
K. Kobayashi,
A. Fahrenbach,
G. Hallinan,
V. Stamenkovic,
O. Cohen,
W. Kuang,
B. van der Holst,
C. Manchester,
G. Zank,
O. Verkhoglyadova
, et al. (11 additional authors not shown)
Abstract:
The search of life in the Universe is a fundamental problem of astrobiology and a major priority for NASA. A key area of major progress since the NASA Astrobiology Strategy 2015 (NAS15) has been a shift from the exoplanet discovery phase to a phase of characterization and modeling of the physics and chemistry of exoplanetary atmospheres, and the development of observational strategies for the sear…
▽ More
The search of life in the Universe is a fundamental problem of astrobiology and a major priority for NASA. A key area of major progress since the NASA Astrobiology Strategy 2015 (NAS15) has been a shift from the exoplanet discovery phase to a phase of characterization and modeling of the physics and chemistry of exoplanetary atmospheres, and the development of observational strategies for the search for life in the Universe by combining expertise from four NASA science disciplines including heliophysics, astrophysics, planetary science and Earth science. The NASA Nexus for Exoplanetary System Science (NExSS) has provided an efficient environment for such interdisciplinary studies. Solar flares, coronal mass ejections and solar energetic particles produce disturbances in interplanetary space collectively referred to as space weather, which interacts with the Earth upper atmosphere and causes dramatic impact on space and ground-based technological systems. Exoplanets within close in habitable zones around M dwarfs and other active stars are exposed to extreme ionizing radiation fluxes, thus making exoplanetary space weather (ESW) effects a crucial factor of habitability. In this paper, we describe the recent developments and provide recommendations in this interdisciplinary effort with the focus on the impacts of ESW on habitability, and the prospects for future progress in searching for signs of life in the Universe as the outcome of the NExSS workshop held in Nov 29 - Dec 2, 2016, New Orleans, LA. This is one of five Life Beyond the Solar System white papers submitted by NExSS to the National Academy of Sciences in support of the Astrobiology Science Strategy for the Search for Life in the Universe.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Multiple Quintets via Singlet Fission in Ordered Films at Room Temperature
Authors:
Daphné Lubert-Perquel,
Enrico Salvadori,
Matthew Dyson,
Paul N. Stavrinou,
Riccardo Montis,
Hiroki Nagashima,
Yasuhiro Kobori,
Sandrine Heutz,
Christopher W. M. Kay
Abstract:
The growing interest in harnessing singlet fission for photovoltaic applications stems from the possibility of generating two excitons from a single photon. Quantum efficiencies above unity have been reported, yet the correlation between singlet fission and intermolecular geometry is poorly understood. To address this, we investigated ordered solid solutions of pentacene in p-terphenyl grown by or…
▽ More
The growing interest in harnessing singlet fission for photovoltaic applications stems from the possibility of generating two excitons from a single photon. Quantum efficiencies above unity have been reported, yet the correlation between singlet fission and intermolecular geometry is poorly understood. To address this, we investigated ordered solid solutions of pentacene in p-terphenyl grown by organic molecular beam deposition. Two classes of dimers are expected from the crystal structure - parallel and herringbone - with intrinsically distinctive electronic coupling. Using electron paramagnetic resonance spectroscopy, we provide compelling evidence for the formation of distinct quintet excitons at room temperature. These are assigned to specific pentacene pairs according to their angular dependence. This work highlights the importance of controlling the intermolecular geometry and the need to develop adequate theoretical models to account for the relationship between structure and electronic interactions in strongly-coupled, high-spin molecular systems.
△ Less
Submitted 3 January, 2018; v1 submitted 2 January, 2018;
originally announced January 2018.
-
Continuous-wave room-temperature diamond maser
Authors:
Jonathan D. Breeze,
Juna Sathian,
Enrico Salvadori,
Neil McN. Alford,
Christopher W. M. Kay
Abstract:
The maser, older sibling of the laser, has been confined to relative obscurity due to its reliance on cryogenic refrigeration and high-vacuum systems. Despite this it has found application in deep-space communications and radio astronomy due to its unparalleled performance as a low-noise amplifier and oscillator. The recent demonstration of a room-temperature solid- state maser exploiting photo-ex…
▽ More
The maser, older sibling of the laser, has been confined to relative obscurity due to its reliance on cryogenic refrigeration and high-vacuum systems. Despite this it has found application in deep-space communications and radio astronomy due to its unparalleled performance as a low-noise amplifier and oscillator. The recent demonstration of a room-temperature solid- state maser exploiting photo-excited triplet states in organic pentacene molecules paves the way for a new class of maser that could find applications in medicine, security and sensing, taking advantage of its sensitivity and low noise. However, to date, only pulsed operation has been observed in this system. Furthermore, organic maser molecules have poor thermal and mechanical properties, and their triplet sub-level decay rates make continuous emission challenging: alternative materials are therefore required. Therefore, inorganic materials containing spin-defects such as diamond and silicon carbide have been proposed. Here we report a continuous-wave (CW) room-temperature maser oscillator using optically pumped charged nitrogen-vacancy (NV) defect centres in diamond. This demonstration unlocks the potential of room-temperature solid-state masers for use in a new generation of microwave devices.
△ Less
Submitted 20 October, 2017;
originally announced October 2017.
-
Using the Coronal Evolution to Successfully Forward Model CMEs' In Situ Magnetic Profiles
Authors:
C. Kay,
N. Gopalswamy
Abstract:
Predicting the effects of a coronal mass ejection (CME) impact requires knowing if impact will occur, which part of the CME impacts, and its magnetic properties. We explore the relation between CME deflections and rotations, which change the position and orientation of a CME, and the resulting magnetic profiles at 1 AU. For 45 STEREO-era, Earth-impacting CMEs, we determine the solar source of each…
▽ More
Predicting the effects of a coronal mass ejection (CME) impact requires knowing if impact will occur, which part of the CME impacts, and its magnetic properties. We explore the relation between CME deflections and rotations, which change the position and orientation of a CME, and the resulting magnetic profiles at 1 AU. For 45 STEREO-era, Earth-impacting CMEs, we determine the solar source of each CME, reconstruct its coronal position and orientation, and perform a ForeCAT (Kay et al. 2015a) simulation of the coronal deflection and rotation. From the reconstructed and modeled CME deflections and rotations we determine the solar cycle variation and correlations with CME properties. We assume no evolution between the outer corona and 1 AU and use the ForeCAT results to drive the FIDO in situ magnetic field model (Kay et al. 2017a), allowing for comparisons with ACE and Wind observations. We do not attempt to reproduce the arrival time. On average FIDO reproduces the in situ magnetic field for each vector component with an error equivalent to 35% of the average total magnetic field strength when the total modeled magnetic field is scaled to match the average observed value. Random walk best fits distinguish between ForeCAT's ability to determine FIDO's input parameters and the limitations of the simple flux rope model. These best fits reduce the average error to 30%. The FIDO results are sensitive to changes of order a degree in the CME latitude, longitude, and tilt, suggesting that accurate space weather predictions require accurate measurements of a CME's position and orientation.
△ Less
Submitted 10 October, 2017;
originally announced October 2017.
-
Deflection and Rotation of CMEs from Active Region 11158
Authors:
C. Kay,
N. Gopalswamy,
H. Xie,
S. Yashiro
Abstract:
Between the 13 and 16 of February 2011 a series of coronal mass ejections (CMEs) erupted from multiple polarity inversion lines within active region 11158. For seven of these CMEs we use the Graduated Cylindrical Shell (GCS) flux rope model to determine the CME trajectory using both Solar Terrestrial Relations Observatory (STEREO) extreme ultraviolet (EUV) and coronagraph images. We then use the F…
▽ More
Between the 13 and 16 of February 2011 a series of coronal mass ejections (CMEs) erupted from multiple polarity inversion lines within active region 11158. For seven of these CMEs we use the Graduated Cylindrical Shell (GCS) flux rope model to determine the CME trajectory using both Solar Terrestrial Relations Observatory (STEREO) extreme ultraviolet (EUV) and coronagraph images. We then use the Forecasting a CME's Altered Trajectory (ForeCAT) model for nonradial CME dynamics driven by magnetic forces, to simulate the deflection and rotation of the seven CMEs. We find good agreement between the ForeCAT results and the reconstructed CME positions and orientations. The CME deflections range in magnitude between 10 degrees and 30 degrees. All CMEs deflect to the north but we find variations in the direction of the longitudinal deflection. The rotations range between 5\mydeg and 50\mydeg with both clockwise and counterclockwise rotations occurring. Three of the CMEs begin with initial positions within 2 degrees of one another. These three CMEs all deflect primarily northward, with some minor eastward deflection, and rotate counterclockwise. Their final positions and orientations, however, respectively differ by 20 degrees and 30 degrees. This variation in deflection and rotation results from differences in the CME expansion and radial propagation close to the Sun, as well as the CME mass. Ultimately, only one of these seven CMEs yielded discernible in situ signatures near Earth, despite the active region facing near Earth throughout the eruptions. We suggest that the differences in the deflection and rotation of the CMEs can explain whether each CME impacted or missed the Earth.
△ Less
Submitted 25 April, 2017;
originally announced April 2017.
-
Using ForeCAT Deflections and Rotations to Constrain the Early Evolution of CMEs
Authors:
C. Kay,
M. Opher,
R. C. Colaninno,
A. Vourlidas
Abstract:
To accurately predict the space weather effects of coronal mass ejection (CME) impacts at Earth one must know if and when a CME will impact Earth, and the CME parameters upon impact. Kay et al. (2015b) presents Forecasting a CME's Altered Trajectory (ForeCAT), a model for CME deflections based on the magnetic forces from the background solar magnetic field. Knowing the deflection and rotation of a…
▽ More
To accurately predict the space weather effects of coronal mass ejection (CME) impacts at Earth one must know if and when a CME will impact Earth, and the CME parameters upon impact. Kay et al. (2015b) presents Forecasting a CME's Altered Trajectory (ForeCAT), a model for CME deflections based on the magnetic forces from the background solar magnetic field. Knowing the deflection and rotation of a CME enables prediction of Earth impacts, and the CME orientation upon impact. We first reconstruct the positions of the 2008 April 10 and the 2012 July 12 CMEs from the observations. The first of these CMEs exhibits significant deflection and rotation (34 degrees deflection and 58 degrees rotation), while the second shows almost no deflection or rotation (<3 degrees each). Using ForeCAT, we explore a range of initial parameters, such as the CME location and size, and find parameters that can successfully reproduce the behavior for each CME. Additionally, since the deflection depends strongly on the behavior of a CME in the low corona (Kay et al. (2015a, 2015b)), we are able to constrain the expansion and propagation of these CMEs in the low corona.
△ Less
Submitted 10 June, 2016;
originally announced June 2016.
-
Probability of CME Impact on Exoplanets Orbiting M Dwarfs and Solar-Like Stars
Authors:
C. Kay,
M. Opher,
M. Kornbleuth
Abstract:
Solar coronal mass ejections (CMEs) produce adverse space weather effects at Earth. Planets in the close habitable zone of magnetically active M dwarfs may experience more extreme space weather than at Earth, including frequent CME impacts leading to atmospheric erosion and leaving the surface exposed to extreme flare activity. Similar erosion may occur for hot Jupiters with close orbits around so…
▽ More
Solar coronal mass ejections (CMEs) produce adverse space weather effects at Earth. Planets in the close habitable zone of magnetically active M dwarfs may experience more extreme space weather than at Earth, including frequent CME impacts leading to atmospheric erosion and leaving the surface exposed to extreme flare activity. Similar erosion may occur for hot Jupiters with close orbits around solar-like stars. We have developed a model, Forecasting a CME's Altered Trajectory (ForeCAT), which predicts a CME's deflection. We adapt ForeCAT to simulate CME deflections for the mid-type M dwarf V374 Peg and hot Jupiters with solar-type hosts. V374 Peg's strong magnetic fields can trap CMEs at the M dwarfs's Astrospheric Current Sheet, the location of the minimum in the background magnetic field. Solar-type CMEs behave similarly, but have much smaller deflections and do not get trapped at the Astrospheric Current Sheet. The probability of planetary impact decreases with increasing inclination of the planetary orbit with respect to the Astrospheric Current Sheet - 0.5 to 5 CME impacts per day for M dwarf exoplanets, 0.05 to 0.5 CME impacts per day for solar-type hot Jupiters. We determine the minimum planetary magnetic field necessary to shield a planet's atmosphere from the CME impacts. M dwarf exoplanets require values between tens and hundreds of Gauss. Hot Jupiters around a solar-type star, however, require a more reasonable <30 G. These values exceed the magnitude required to shield a planet from the stellar wind, suggesting CMEs may be the key driver of atmospheric losses.
△ Less
Submitted 9 May, 2016;
originally announced May 2016.
-
The Heliocentric Distance Where the Deflections and Rotations of Solar Coronal Mass Ejections Occur
Authors:
C. Kay,
M. Opher
Abstract:
Understanding the trajectory of a coronal mass ejection (CME), including any deflection from a radial path, and the orientation of its magnetic field is essential for space weather predictions. Kay et al. (2015b) developed a model, Forecasting a CME's Altered Trajectory (ForeCAT), of CME deflections and rotation due to magnetic forces, not including the effects of reconnection. ForeCAT is able to…
▽ More
Understanding the trajectory of a coronal mass ejection (CME), including any deflection from a radial path, and the orientation of its magnetic field is essential for space weather predictions. Kay et al. (2015b) developed a model, Forecasting a CME's Altered Trajectory (ForeCAT), of CME deflections and rotation due to magnetic forces, not including the effects of reconnection. ForeCAT is able to reproduce the deflection of observed CMEs (Kay et al. 2015a). The deflecting CMEs tend to show a rapid increase of their angular momentum close to the Sun, followed by little to no increase at farther distances. Here we quantify the distance at which the CME deflection is "determined," which we define as the distance after which the background solar wind has negligible influence on the total deflection. We consider a wide range in CME masses and radial speeds and determine that the deflection and rotation of these CMEs can be well-described by assuming they propagate with constant angular momentum beyond 10 Rs. The assumption of constant angular momentum beyond 10 Rs yields underestimates of the total deflection at 1 AU of only 1% to 5% and underestimates of the rotation of 10%. Since the deflection from magnetic forces is determined by 10 Rs, non-magnetic forces must be responsible for any observed interplanetary deflections or rotations where the CME has increasing angular momentum.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Evaluation of Elekta SymmetryTM 4D IGRT system by using moving lung phantom
Authors:
Hun-Joo Shin,
Shin-Wook Kim,
Chul Seung Kay,
Jae-Hyuk Seo,
Gi-Woong Lee,
Ki-Mun Kang,
Hong Seok Jang,
Young-nam Kang
Abstract:
Purpose: 4D CBCT is a beneficial tool for the treatment of movable tumors, because it can help us to understand where the tumors are actually located and have a precise treatment plan. However, there is a limitation that general CBCT images cannot perfectly help the sophisticated registration. On the other hand, SymmetryTM 4D IGRT system of Elekta can offer the 4D CBCT registration option. In this…
▽ More
Purpose: 4D CBCT is a beneficial tool for the treatment of movable tumors, because it can help us to understand where the tumors are actually located and have a precise treatment plan. However, there is a limitation that general CBCT images cannot perfectly help the sophisticated registration. On the other hand, SymmetryTM 4D IGRT system of Elekta can offer the 4D CBCT registration option. In this study, we intend to evaluate the usefulness of SymmetryTM. Method and Materials: Planning CT images of the CIRS moving lung phantom were acquired from 4D MDCT. And they are sorted as 10 phases from 0% phase to 90% phase. The thickness of CT images was 1 mm. Acquired MDCT images were transferred to the contouring software and a virtual target was generated. An one arc VMAT plan was performed by using the treatment planning system on the virtual target. Finally, the movement of the phantom was verified through XVI SymmetryTM system. Results: The physical movement of CIRS moving lung phantom was +/- 10.0 mm in superior-inferior direction, +/- 1.0 mm in lateral direction, and +/- 2.5 mm in anterior-posterior direction. The movement of the phantom was measured from 4D MDCT registration as +/- 10.2 mm in superior-inferior direction, +/- 0.9 mm in lateral direction, and +/- 2.45 mm in anterior-posterior direction. The movement of the phantom was measured from SymmetryTM registration as +/- 10.1 mm in superior-inferior direction, +/- 0.9 mm in lateral direction, and +/- 2.4 mm in anterior/posterior direction. Conclusion: It is confirmed that 4D CBCT is a beneficial tool for the treatment of movable tumors. Therefore, 4D registration of SymmetryTM can increase the precision of the registration when a movable tumor is a target of radiation treatment.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Constraining the Mass and the Non-Radial Drag Coefficient of a Solar Coronal Mass Ejection
Authors:
C. Kay,
L. F. G. dos Santos,
M. Opher
Abstract:
Decades of observations show that CMEs can deflect from a purely radial trajectory yet no consensus exists as to the cause of these deflections. Many of theories attribute the CME deflection to magnetic forces. We developed ForeCAT (Kay et al. 2013, Kay et al. 2015), a model for CME deflections based solely on magnetic forces, neglecting any reconnection effects. Here we compare ForeCAT prediction…
▽ More
Decades of observations show that CMEs can deflect from a purely radial trajectory yet no consensus exists as to the cause of these deflections. Many of theories attribute the CME deflection to magnetic forces. We developed ForeCAT (Kay et al. 2013, Kay et al. 2015), a model for CME deflections based solely on magnetic forces, neglecting any reconnection effects. Here we compare ForeCAT predictions to the observed deflection of the 2008 December 12 CME and find that ForeCAT can accurately reproduce the observations. Multiple observations show that this CME deflected nearly 30° in latitude (Byrne et al. 2010, Gui et al. 2011) and 4.4° in longitude (Gui et al. 2011). From the observations, we are able to constrain all of the ForeCAT input parameters (initial position, radial propagation speed, and expansion) except the CME mass and the drag coefficient that affects the CME motion. By minimizing the reduced chi-squared, $χ^2_ν$, between the ForeCAT results and the observations we determine an acceptable mass range between 4.5x10$^{14}$ and 1x10$^{15}$ g and the drag coefficient less than 1.4 with a best fit at 7.5x10$^{14}$ g and 0 for the mass and drag coefficient. ForeCAT is sensitive to the magnetic background and we are also able to constrain the rate at which the quiet sun magnetic field falls to be similar or to or fall slightly slower than the Potential Field Source Surface model.
△ Less
Submitted 2 March, 2015;
originally announced March 2015.
-
Global Trends of CME Deflections Based on CME and Solar Parameters
Authors:
C. Kay,
M. Opher,
R. M. Evans
Abstract:
Accurate space weather forecasting requires knowledge of the trajectory of coronal mass ejections (CMEs), including any deflections close to the Sun or through interplanetary space. Kay et al. 2013 introduced ForeCAT, a model of CME deflection resulting from the background solar magnetic field. For a magnetic field solution corresponding to Carrington Rotation (CR) 2029 (declining phase, April-May…
▽ More
Accurate space weather forecasting requires knowledge of the trajectory of coronal mass ejections (CMEs), including any deflections close to the Sun or through interplanetary space. Kay et al. 2013 introduced ForeCAT, a model of CME deflection resulting from the background solar magnetic field. For a magnetic field solution corresponding to Carrington Rotation (CR) 2029 (declining phase, April-May 2005), the majority of the CMEs deflected to the Heliospheric Current Sheet (HCS), the minimum in magnetic pressure on global scales. Most of the deflection occurred below 4 Rs. Here we extend ForeCAT to include a three dimensional description of the deflecting CME. We attempt to answer the following questions: a) Do all CMEs deflect to the magnetic minimum? and b) Does most deflection occur within the first few solar radii (~4 Rs)? Results for solar minimum and declining phase CMEs show that not every CME deflects to the magnetic minimum and that the deflection is typically determined below 2 Rs. Slow, wide, low mass CMEs in declining phase solar backgrounds with strong magnetic field and magnetic gradients exhibit the largest deflections. Local gradients related to active regions tend to cause the largest deviations from the deflection predicted by global magnetic gradients, but variations can also be seen for CMEs in the quiet sun regions of the declining phase CR. We show the torques due to differential forces along the CME can cause rotation about the CME's toroidal axis.
△ Less
Submitted 8 April, 2015; v1 submitted 16 October, 2014;
originally announced October 2014.
-
Forecasting a Coronal Mass Ejection's Altered Trajectory: ForeCAT
Authors:
Christina Kay,
Merav Opher,
Rebekah M. Evans
Abstract:
To predict whether a coronal mass ejection (CME) will impact Earth, the effects of the background on the CME's trajectory must be taken into account. We develop a model, ForeCAT (Forecasting a CME's Altered Trajectory), of CME deflection due to magnetic forces. ForeCAT includes CME expansion, a three-part propagation model, and the effects of drag on the CME's deflection. Given the background sola…
▽ More
To predict whether a coronal mass ejection (CME) will impact Earth, the effects of the background on the CME's trajectory must be taken into account. We develop a model, ForeCAT (Forecasting a CME's Altered Trajectory), of CME deflection due to magnetic forces. ForeCAT includes CME expansion, a three-part propagation model, and the effects of drag on the CME's deflection. Given the background solar wind conditions, the launch site of the CME, and the properties of the CME (mass, final propagation speed, initial radius, and initial magnetic strength), ForeCAT predicts the deflection of the CME. Two different magnetic backgrounds are considered: a scaled background based on type II radio burst profiles and a Potential Field Source Surface (PFSS) background. For a scaled background where the CME is launched from an active region located between a CH and streamer region the strong magnetic gradients cause a deflection of 8.1 degrees in latitude and 26.4 degrees in longitude for a 1e15 g CME propagating out to 1 AU. Using the PFSS background, which captures the variation of the streamer belt position with height, leads to a deflection of 1.6 degrees in latitude and 4.1 degrees in longitude for the control case. Varying the CME's input parameters within observed ranges leads to the majority of CMEs reaching the streamer belt within the first few solar radii. For these specific backgrounds, the streamer belt acts like a potential well that forces the CME into an equilibrium angular position.
△ Less
Submitted 30 July, 2013; v1 submitted 29 July, 2013;
originally announced July 2013.
-
Measuring central-spin interaction with a spin bath by pulsed ENDOR: Towards suppression of spin diffusion decoherence
Authors:
S. J. Balian,
M. B. A. Kunze,
M. H. Mohammady,
G. W. Morley,
W. M. Witzel,
C. W. M. Kay,
T. S. Monteiro
Abstract:
We present pulsed electron-nuclear double resonance (ENDOR) experiments which enable us to characterize the coupling between bismuth donor spin qubits in Si and the surrounding spin bath of 29Si impurities which provides the dominant decoherence mechanism (nuclear spin diffusion) at low temperatures (< 16 K). Decoupling from the spin bath is predicted and cluster correlation expansion simulations…
▽ More
We present pulsed electron-nuclear double resonance (ENDOR) experiments which enable us to characterize the coupling between bismuth donor spin qubits in Si and the surrounding spin bath of 29Si impurities which provides the dominant decoherence mechanism (nuclear spin diffusion) at low temperatures (< 16 K). Decoupling from the spin bath is predicted and cluster correlation expansion simulations show near-complete suppression of spin diffusion, at optimal working points. The suppression takes the form of sharply peaked divergences of the spin diffusion coherence time, in contrast with previously identified broader regions of insensitivity to classical fluctuations. ENDOR data suggest that anisotropic contributions are comparatively weak, so the form of the divergences is largely independent of crystal orientation.
△ Less
Submitted 8 October, 2012; v1 submitted 26 March, 2012;
originally announced March 2012.
-
Quantum control of hybrid nuclear-electronic qubits
Authors:
Gavin W. Morley,
Petra Lueders,
M. Hamed Mohammady,
Setrak J. Balian,
Gabriel Aeppli,
Christopher W. M. Kay,
Wayne M. Witzel,
Gunnar Jeschke,
Tania S. Monteiro
Abstract:
Pulsed magnetic resonance is a wide-reaching technology allowing the quantum state of electronic and nuclear spins to be controlled on the timescale of nanoseconds and microseconds respectively. The time required to flip either dilute electronic or nuclear spins is orders of magnitude shorter than their decoherence times, leading to several schemes for quantum information processing with spin qubi…
▽ More
Pulsed magnetic resonance is a wide-reaching technology allowing the quantum state of electronic and nuclear spins to be controlled on the timescale of nanoseconds and microseconds respectively. The time required to flip either dilute electronic or nuclear spins is orders of magnitude shorter than their decoherence times, leading to several schemes for quantum information processing with spin qubits. We investigate instead the novel regime where the eigenstates approximate 50:50 superpositions of the electronic and nuclear spin states forming "hybrid nuclear-electronic" qubits. Here we demonstrate quantum control of these states for the first time, using bismuth-doped silicon, in just 32 ns: this is orders of magnitude faster than previous experiments where pure nuclear states were used. The coherence times of our states are five orders of magnitude longer, reaching 4 ms, and are limited by the naturally-occurring 29Si nuclear spin impurities. There is quantitative agreement between our experiments and no-free-parameter analytical theory for the resonance positions, as well as their relative intensities and relative Rabi oscillation frequencies. In experiments where the slow manipulation of some of the qubits is the rate limiting step, quantum computations would benefit from faster operation in the hybrid regime.
△ Less
Submitted 16 December, 2011; v1 submitted 20 September, 2011;
originally announced September 2011.
-
Initializing, manipulating and storing quantum information with bismuth dopants in silicon
Authors:
Gavin W. Morley,
Marc Warner,
A. Marshall Stoneham,
P. Thornton Greenland,
Johan van Tol,
Christopher W. M. Kay,
Gabriel Aeppli
Abstract:
A prerequisite for exploiting spins for quantum data storage and processing is long spin coherence times. Phosphorus dopants in silicon (Si:P) have been favoured as hosts for such spins because of measured electron spin coherence times (T2) longer than any other electron spin in the solid state: 14 ms at 7 K. Heavier impurities such as bismuth in silicon (Si:Bi) could be used in conjunction with S…
▽ More
A prerequisite for exploiting spins for quantum data storage and processing is long spin coherence times. Phosphorus dopants in silicon (Si:P) have been favoured as hosts for such spins because of measured electron spin coherence times (T2) longer than any other electron spin in the solid state: 14 ms at 7 K. Heavier impurities such as bismuth in silicon (Si:Bi) could be used in conjunction with Si:P for quantum information proposals that require two separately addressable spin species. However, the question of whether the incorporation of the much less soluble Bi into Si leads to defect species that destroy coherence has not been addressed. Here we show that schemes involving Si:Bi are indeed feasible as the electron spin coherence time T2 exceeds 1 ms at 10 K. We polarized the Si:Bi electrons and hyperpolarized the I=9/2 nuclear spin of 209Bi, manipulating both with pulsed magnetic resonance. The larger nuclear spin means that a Si:Bi dopant provides a 20-dimensional Hilbert space rather than the four dimensional Hilbert space of an I=1/2 Si:P dopant.
△ Less
Submitted 20 April, 2010;
originally announced April 2010.