-
Archimedean cuboctahedron: The Medieval Journey from the Middle East to Northern Russia
Authors:
Andrey Yu. Chernov,
Eugene A. Katz
Abstract:
Bronze cuboctahedral weights dated to the VIII-X centuries were found in northwest Russia near Ladoga, one of the most important trading centers in Eastern Europe in the VIII-X centuries. The history of the mathematical study of cuboctahedron and more generally of the entire family of Archimedean solids in the Middle East and Europe supports the archeological hypothesis about the origin of these a…
▽ More
Bronze cuboctahedral weights dated to the VIII-X centuries were found in northwest Russia near Ladoga, one of the most important trading centers in Eastern Europe in the VIII-X centuries. The history of the mathematical study of cuboctahedron and more generally of the entire family of Archimedean solids in the Middle East and Europe supports the archeological hypothesis about the origin of these artifacts and trading contacts between Europe and the Islamic Caliphate at that time when European mathematicians were not aware of such polyhedra, but Arab-Persian scientists and craftsmen were.
△ Less
Submitted 26 December, 2023;
originally announced December 2023.
-
Credit to Pioneering Work on Carbon Nanotubes
Authors:
Eugene A. Katz
Abstract:
This letter gives a credit to a pioneering paper that is almost unknown to scientific community. On the basis of Transmission Electron Microscopy images and X-ray Ray Diffraction patterns of carbon multi-layer tubular crystals the authors suggested a model of nanotube structure formation and hypothesis on various chirality of carbon nanotubes.
This letter gives a credit to a pioneering paper that is almost unknown to scientific community. On the basis of Transmission Electron Microscopy images and X-ray Ray Diffraction patterns of carbon multi-layer tubular crystals the authors suggested a model of nanotube structure formation and hypothesis on various chirality of carbon nanotubes.
△ Less
Submitted 8 May, 2021;
originally announced May 2021.
-
Temperature and intensity dependence of the open-circuit voltage of InGaN/GaN multi-quantum well solar cells
Authors:
M. Auf der Maur,
G. Moses,
J. M. Gordon,
X. Huang,
Y. Zhao,
E. A. Katz
Abstract:
We have analyzed the temperature and intensity dependence of the open-circuit voltage of InGaN/GaN multi-quantum well solar cells up to 725 K and more than 1000 suns. We show that the simple ABC model routinely used to analyze the measured quantum efficiency data of InGaN/GaN LEDs can accurately reproduce the temperature and intensity dependence of the measured open-circuit voltage if a temperatur…
▽ More
We have analyzed the temperature and intensity dependence of the open-circuit voltage of InGaN/GaN multi-quantum well solar cells up to 725 K and more than 1000 suns. We show that the simple ABC model routinely used to analyze the measured quantum efficiency data of InGaN/GaN LEDs can accurately reproduce the temperature and intensity dependence of the measured open-circuit voltage if a temperature-dependent Shockley-Read-Hall lifetime is used and device heating is taken into account.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
Perovskite/silicon tandem solar cells: Effect of luminescent coupling and bifaciality
Authors:
Klaus Jäger,
Peter Tillmann,
Eugene A. Katz,
Christiane Becker
Abstract:
The power conversion efficiency of the market-dominating silicon photovoltaics approaches its theoretical limit. Bifacial solar operation with harvesting additional light im**ing on the module back and the perovskite/silicon tandem device architecture are among the most promising approaches for further increasing the energy yield from a limited area. Here, we calculate the energy output of perov…
▽ More
The power conversion efficiency of the market-dominating silicon photovoltaics approaches its theoretical limit. Bifacial solar operation with harvesting additional light im**ing on the module back and the perovskite/silicon tandem device architecture are among the most promising approaches for further increasing the energy yield from a limited area. Here, we calculate the energy output of perovskite/silicon tandem solar cells in monofacial and bifacial operation considering, for the first time, luminescent coupling between two sub-cells. For energy yield calculations we study idealized solar cells at both, standard testing as well as realistic weather conditions in combination with a detailed illumination model for periodic solar panel arrays. Considering typical, experimental photoluminescent quantum yield values we find that more than 50% of excess electron-hole pairs in the perovskite top cell can be utilized by the silicon bottom cell by means of luminescent coupling. As a result, luminescent coupling strongly relaxes the constraints on the top-cell bandgap in monolithic tandem devices. In combination with bifacial operation, the optimum perovskite bandgap shifts from 1.71 eV to the range 1.60-1.65 eV where already high-quality perovskite materials exist. The results can hence change a paradigm in develo** the optimum perovskite material for tandem solar cells.
△ Less
Submitted 14 December, 2020; v1 submitted 31 August, 2020;
originally announced August 2020.
-
Effect of Halide Composition on the Photochemical Stability of Perovskite Photovoltaic Materials
Authors:
Ravi K. Misra,
Laura Ciammaruchi,
Sigalit Aharon,
Dmitry Mogilyansky,
Lioz Etgar,
Iris Visoly-Fisher,
Eugene A. Katz
Abstract:
Photochemical stability of encapsulated films of mixed halide perovskites with a range of MAPb(I1-xBrx)3 compositions (solid solutions) was investigated under accelerated stressing using concentrated sunlight. Evolution of light absorption and the corresponding structural modifications in the films were recorded by UV-vis spectroscopy and X-ray diffraction (XRD), respectively. MAPbBr3 film exhibit…
▽ More
Photochemical stability of encapsulated films of mixed halide perovskites with a range of MAPb(I1-xBrx)3 compositions (solid solutions) was investigated under accelerated stressing using concentrated sunlight. Evolution of light absorption and the corresponding structural modifications in the films were recorded by UV-vis spectroscopy and X-ray diffraction (XRD), respectively. MAPbBr3 film exhibited no degradation. In MAPbI3 and mixed halide MAPb(I1-xBrx)3 films, decomposition of the perovskite material with crystallization of inorganic PbI2, and the corresponding degradation of light absorption, were recorded. Introduction of bromine into the solid solution was found to stress its structure and accelerate the degradation. The relevance of accelerated testing to standard operational conditions of solar cells was confirmed by comparison to degradation experiments under outdoor sunlight exposure. Reasons for the reduced stability of the mixed halide compositions are discussed.
△ Less
Submitted 29 March, 2016;
originally announced March 2016.
-
Bucky-Corn: Van der Waals Composite of Carbon Nanotube Coated by Fullerenes
Authors:
Leonid A. Chernozatonskii,
Anastasiya A. Artyukh,
Victor A. Demin,
Eugene A. Katz
Abstract:
Can C60 layer cover a surface of single-wall carbon nanotube (SWCNT) forming an exohedral pure-carbon hybrid with only VdW interactions? The paper addresses this question and demonstrates that the fullerene shell layer in such a bucky-corn structure can be stable. Theoretical study of structure, stability and electronic properties of the following bucky-corn hybrids is reported: C60 and C70 molecu…
▽ More
Can C60 layer cover a surface of single-wall carbon nanotube (SWCNT) forming an exohedral pure-carbon hybrid with only VdW interactions? The paper addresses this question and demonstrates that the fullerene shell layer in such a bucky-corn structure can be stable. Theoretical study of structure, stability and electronic properties of the following bucky-corn hybrids is reported: C60 and C70 molecules on an individual SWCNT, C60 dimers on an individual SWCNT as well C60 molecules on SWNT bundles. The geometry and total energies of the bucky-corns were calculated by the molecular dynamics method while the density functional theory method was used to simulate the electronic band structures.
△ Less
Submitted 2 April, 2015;
originally announced April 2015.
-
Concentrated sunlight for accelerated stability testing of organic photovoltaic materials: Towards decoupling light intensity and temperature
Authors:
I. Visoly-Fisher,
A. Mescheloff,
M. Gabay,
C. Bounioux,
L. Zeiri,
M. Sansotera,
A. E. Goryachev,
A. Braun,
Y. Galagan,
E. A. Katz
Abstract:
We have demonstrated OPV accelerated degradation studies using concentrated sunlight, where the atmosphere, temperature and illumination intensity were independently controlled. Testing various schemes for controlling the sample temperature under concentrated sunlight showed that heating of P3HT:PCBM was caused by photons at the absorbed wavelength range and dissipation of excess photon energy, an…
▽ More
We have demonstrated OPV accelerated degradation studies using concentrated sunlight, where the atmosphere, temperature and illumination intensity were independently controlled. Testing various schemes for controlling the sample temperature under concentrated sunlight showed that heating of P3HT:PCBM was caused by photons at the absorbed wavelength range and dissipation of excess photon energy, and not necessarily by IR photon absorption. Sunlight chop** was found to be an effective method for independent temperature control under illumination by concentrated sunlight. The first accelerated degradation tests using sunlight concentration applied to P3HT:PCBM blends were reported. P3HT:PCBM blends exposed to concentrated sunlight in the presence of traces of oxygen/ humidity showed degradation induced by photo-oxidation of the P3HT backbone within the P3HT:PCBM blend, which is significantly thermally accelerated, in agreement with previous observations. However, this could be demonstrated in a time scale of minutes and hours, i.e., significantly accelerated. Exposure of well encapsulated P3HT:PCBM films to concentrated sunlight demonstrated stability up to 3,600 sun*hours, corresponding to about 1.6 years of operating time. This result was obtained at 300 suns exposure after merely 12 hours, demonstrating the advantage of using concentrated sunlight for accelerated stability tests. These tests can therefore combine extremely high acceleration factors with profound understanding of the effect of various, independently controlled factors on the degradation mechanisms.
△ Less
Submitted 21 September, 2014;
originally announced September 2014.
-
Closed pi-electron Network in Large Polyhedral Multi-shell Carbon Nanoparticles
Authors:
A. I. Shames,
E. A. Katz,
A. M. Panich,
D. Mogilyansky,
E. Mogilko,
J. Grinblat,
V. P. Belousov,
I. M. Belousova,
A. N. Ponomarev
Abstract:
High Resolution Transmission Electron Microscopy (HRTEM), X-ray Diffraction (XRD) and Raman spectroscopy reveal a polyhedral multi-shell fullerene-like structure of astralen carbon nanoparticles. The polyhedra consist of large flat graphitic faces connected by defective edge regions with presumably pentagon-like structure. The faces comprise a stacking of 20-50 planar graphene sheets with inter-…
▽ More
High Resolution Transmission Electron Microscopy (HRTEM), X-ray Diffraction (XRD) and Raman spectroscopy reveal a polyhedral multi-shell fullerene-like structure of astralen carbon nanoparticles. The polyhedra consist of large flat graphitic faces connected by defective edge regions with presumably pentagon-like structure. The faces comprise a stacking of 20-50 planar graphene sheets with inter-sheet distance of ~ 0.340 nm. Average sizes of the particles and their flat faces are ~ 40 nm and ~ 15 nm, respectively. The astralen particles are suggested to have defect-free sp^2 flat faces and all defects condense at their polyhedral edges. Electron Paramagnetic Resonance (EPR) spectra of polycrystalline astralen samples reveal two components: a very broad signal with DHpp > 1 T and an asymmetric narrow one centered close to g = 2.00. The latter consists of two overlap** Lorentzian lines. All spectral components are independent of ambient pressure. The intensities of all EPR signals show no changes on decreasing temperature from T = 300 K down to 4 K demonstrating the Pauli paramagnetism. Electron spin-lattice relaxation times T1e remain very short within the same temperature range. Temperature dependent 13C Nuclear Magneti? Resonance (NMR) measurements yield nuclear spin-lattice relaxation times T1n ~ T^-0.612. The exponent in the T1n(T)-dependence for astralen falls between the metallic behavior, T1n ~ T^-1 (Korringa relation), and the semiconductor behavior, T1n ~T^-0.5. All unusual magnetic resonance features of astralen are attributed to delocalized charge carriers which amount considerably exceeds that of spins localized in defects on multi-shell polyhedra edges.
△ Less
Submitted 17 April, 2009;
originally announced April 2009.