Showing 1–8 of 8 results for author: Kashyap, J

Engineering frictional characteristics of MoS2 structure by tuning thickness and morphology- An atomic, electronic structure, and exciton analysis

Authors: Jatin Kashyap, Joseph Torsiello, Yoshiki Kakehi, Dibakar Datta

Abstract: We performed atomic and electron dynamics analysis to study the impact of morphological and thickness changes of a MoS2 system on its tribological properties through a diamond tip. We had considered 4 cases: variable layers (1-4 layers) and number (2-8 indents), radius (12Å, 16Å, 20Å, 24Å), and pattern of indents (0°, 25°, 30°, 35°, 45°, 60°) resulting into 18 subcases. MD results showed changing… ▽ More We performed atomic and electron dynamics analysis to study the impact of morphological and thickness changes of a MoS2 system on its tribological properties through a diamond tip. We had considered 4 cases: variable layers (1-4 layers) and number (2-8 indents), radius (12Å, 16Å, 20Å, 24Å), and pattern of indents (0°, 25°, 30°, 35°, 45°, 60°) resulting into 18 subcases. MD results showed changing the radius and number of indents were the most, and number of layers and indents' pattern were the least effective way to tune the frictional characteristics. Ground state ab-initio study demonstrated an increase in the number and radius of indents, raising the number of stretched bonds. Consequently, the volume covered by the HOMO iso-surface increases, and that of LUMO decreases. That makes higher area/volume available to lose/share electrons, resulting in stronger interlocking between layers and tip. And TD-DFT calculation proves the existence of interfacial excitons, resulting in stronger interlocking between the layer's surface and tip despite a contraction in the LUMO iso-surfaces' area/volume. We believe these interlayer excitons result in higher average Z-axis(hence frictional force) reaction forces for the indents number subcases and lower for indents radius subcases as the number and radius of indents increase. △ Less

Submitted 18 June, 2022; originally announced June 2022.

Drug repurposing for SARS-COV-2: A high-throughput molecular docking, molecular dynamics, machine learning, & ab-initio study

Authors: Jatin Kashyap, Dibakar Datta

Abstract: A molecule of dimension 125nm has caused around 479 Million human infections (80M for the USA) & 6.1 Million human deaths (977,000 for the USA) worldwide and slashed the global economy by US$ 8.5 Trillion over two years. The only other events in recent history that caused comparative human life loss through direct usage (either by (wo)man or nature, respectively) of structure-property relations of… ▽ More A molecule of dimension 125nm has caused around 479 Million human infections (80M for the USA) & 6.1 Million human deaths (977,000 for the USA) worldwide and slashed the global economy by US$ 8.5 Trillion over two years. The only other events in recent history that caused comparative human life loss through direct usage (either by (wo)man or nature, respectively) of structure-property relations of 'nano-structures' (either (wo)man-made or nature, respectively) were nuclear bomb attacks of Japanese cities by the USA during World War II and 1918 Flu Pandemic. This molecule is SARS-CoV-2, which causes a disease known as COVID-19. The high liability cost of the pandemic had incentivized various private, government, and academic entities to work towards finding a cure for these & emerging diseases. As result, multiple vaccine candidates are discovered to avoid the infection in first place. But so far, there has been no success in finding fully effective therapeutics candidates. In this paper, we attempted to provide multiple therapy candidates based upon a sophisticated multi-scale in-silico framework. We have used the following robust framework to screen the ligands; Step-I: high throughput docking, Step-II: molecular dynamics, Step-III: density functional theory analysis. In total, we have analyzed 2.2 Million unique protein binding site/ligand combinations. The proteins were selected based on recent experimental studies. Step-I had filtered that number down to 10 ligands/protein based on molecular docking binding energy, further screening down to 2 ligands/protein based on drug-likeness analysis. Additionally, these two ligands/proteins were investigated in Step-II with a molecular dynamic based RMSD analysis. It finally suggested three ligands (ZINC1176619532, ZINC517580540, ZINC952855827) attacking different binding sites of the protein(7BV2), which were further analyzed in Step III. △ Less

Submitted 6 April, 2022; v1 submitted 1 January, 2022; originally announced January 2022.

PyCARL: A PyNN Interface for Hardware-Software Co-Simulation of Spiking Neural Network

Authors: Adarsha Balaji, Prathyusha Adiraju, Hirak J. Kashyap, Anup Das, Jeffrey L. Krichmar, Nikil D. Dutt, Francky Catthoor

Abstract: We present PyCARL, a PyNN-based common Python programming interface for hardware-software co-simulation of spiking neural network (SNN). Through PyCARL, we make the following two key contributions. First, we provide an interface of PyNN to CARLsim, a computationally-efficient, GPU-accelerated and biophysically-detailed SNN simulator. PyCARL facilitates joint development of machine learning models… ▽ More We present PyCARL, a PyNN-based common Python programming interface for hardware-software co-simulation of spiking neural network (SNN). Through PyCARL, we make the following two key contributions. First, we provide an interface of PyNN to CARLsim, a computationally-efficient, GPU-accelerated and biophysically-detailed SNN simulator. PyCARL facilitates joint development of machine learning models and code sharing between CARLsim and PyNN users, promoting an integrated and larger neuromorphic community. Second, we integrate cycle-accurate models of state-of-the-art neuromorphic hardware such as TrueNorth, Loihi, and DynapSE in PyCARL, to accurately model hardware latencies that delay spikes between communicating neurons and degrade performance. PyCARL allows users to analyze and optimize the performance difference between software-only simulation and hardware-software co-simulation of their machine learning models. We show that system designers can also use PyCARL to perform design-space exploration early in the product development stage, facilitating faster time-to-deployment of neuromorphic products. We evaluate the memory usage and simulation time of PyCARL using functionality tests, synthetic SNNs, and realistic applications. Our results demonstrate that for large SNNs, PyCARL does not lead to any significant overhead compared to CARLsim. We also use PyCARL to analyze these SNNs for a state-of-the-art neuromorphic hardware and demonstrate a significant performance deviation from software-only simulations. PyCARL allows to evaluate and minimize such differences early during model development. △ Less

Submitted 12 May, 2020; v1 submitted 21 March, 2020; originally announced March 2020.

Comments: 10 pages, 25 figures. Accepted for publication at International Joint Conference on Neural Networks (IJCNN) 2020

Comprehensive understanding of water-driven graphene wrinkle life-cycle towards applications in flexible electronics: A computational study

Authors: Jatin Kashyap, Eui-Hyeok Yang, Dibakar Datta

Abstract: The presence of wrinkles in Graphene Nanoribbons (GNR) and other two-dimensional (2D) materials significantly alter their mechanical, electronic, optical properties, which can be either beneficial or detrimental. Experimentally, it has been observed that during the commonly used growth process of GNR, water molecules, sourced from ambient humidity, can be diffused in between GNR and the substrate.… ▽ More The presence of wrinkles in Graphene Nanoribbons (GNR) and other two-dimensional (2D) materials significantly alter their mechanical, electronic, optical properties, which can be either beneficial or detrimental. Experimentally, it has been observed that during the commonly used growth process of GNR, water molecules, sourced from ambient humidity, can be diffused in between GNR and the substrate. The water diffusion causes wrinkle formation in GNR, which influences its properties. Furthermore, the diffused water eventually dries, creating the alteration not only in the geometry of Wrinkled Graphene Nanoribbons (WGNR) but also its features. Computational analysis of these phenomena can provide an atomistic-level understanding of the phenomena. Therefore, in this work, Molecular Dynamics (MD) simulations are performed to model the water diffusion and evaporation in between GNR and its substrate, and their effect on wrinkle formation and dynamics. Additionally, Density Functional Theory (DFT)-based analysis is used to characterize the difference in the electronic structure of WGNR caused by the change in wrinkle geometry. Our study reveals that the initially distributed wrinkles tend to coalesce to form a localized wrinkle whose configuration depends on the initial wrinkle geometry and the amount of diffused water. The wrinkle configuration changes upon drying, while it remains static until the complete drying. The movement of the localized wrinkle is the combination of three fundamental modes - bending, buckling, and sliding. The stress analysis reveals that the maximum stress is at the base of the wrinkle, and its magnitude is always below the plasticity limit. The DFT results provide insight into the potential of using the wrinkles to control the direction of electron flow for the applications in flexible electronics. △ Less

Submitted 2 January, 2020; originally announced January 2020.

Comments: Main Paper 23 pages, 13 figures

Sparse Representations for Object and Ego-motion Estimation in Dynamic Scenes

Authors: Hirak J Kashyap, Charless Fowlkes, Jeffrey L Krichmar

Abstract: Dynamic scenes that contain both object motion and egomotion are a challenge for monocular visual odometry (VO). Another issue with monocular VO is the scale ambiguity, i.e. these methods cannot estimate scene depth and camera motion in real scale. Here, we propose a learning based approach to predict camera motion parameters directly from optic flow, by marginalizing depthmap variations and outli… ▽ More Dynamic scenes that contain both object motion and egomotion are a challenge for monocular visual odometry (VO). Another issue with monocular VO is the scale ambiguity, i.e. these methods cannot estimate scene depth and camera motion in real scale. Here, we propose a learning based approach to predict camera motion parameters directly from optic flow, by marginalizing depthmap variations and outliers. This is achieved by learning a sparse overcomplete basis set of egomotion in an autoencoder network, which is able to eliminate irrelevant components of optic flow for the task of camera parameter or motionfield estimation. The model is trained using a sparsity regularizer and a supervised egomotion loss, and achieves the state-of-the-art performances on trajectory prediction and camera rotation prediction tasks on KITTI and Virtual KITTI datasets, respectively. The sparse latent space egomotion representation learned by the model is robust and requires only 5% of the hidden layer neurons to maintain the best trajectory prediction accuracy on KITTI dataset. Additionally, in presence of depth information, the proposed method demonstrates faithful object velocity prediction for wide range of object sizes and speeds by global compensation of predicted egomotion and a divisive normalization procedure. △ Less

Submitted 8 March, 2019; originally announced March 2019.

Comments: With supplementary material

The Inherent Behavior of Graphene Flakes in Water: A Molecular Dynamics Study

Authors: Priyanka Solanky, Vidushi Sharma, Kamalika Ghatak, Jatin Kashyap, Dibakar Datta

Abstract: Graphene-water interaction has been under scrutiny ever since graphene discovery and realization of its exceptional properties. Several computational and experimental reports exist that have tried to look into the interactions involved, however, none of them addresses the issue in its entirety. We have tested the inherent hydrophobic behavior of a small graphene in water droplet by the means of MD… ▽ More Graphene-water interaction has been under scrutiny ever since graphene discovery and realization of its exceptional properties. Several computational and experimental reports exist that have tried to look into the interactions involved, however, none of them addresses the issue in its entirety. We have tested the inherent hydrophobic behavior of a small graphene in water droplet by the means of MD simulations. The analysis has been extended to multiple graphene flakes in water and their respective size dependent responses to water droplet. Graphene retreats from water droplet to encapsulate it from the surface. This response was highly dependent upon graphene size with respect to water content. Additionally, we also report self-assembly of multilayered graphene in water by means of MD simulations, an observation which can be utilized to synthesize such structures in a cost-effective way by experimentalists. To fully comprehend graphene behavior in water, graphene deformation was analyzed in the presence of water molecules. It was noticed that graphene wrinkled to wrap around water molecules and resisted complete failure, one that is seen in case of a sole graphene sheet. Our work will not only address the question about whether graphene is hydrophobic or hydrophilic but also provide insight into the behavior of graphene surface and mobility when exposed to water which can be exploited in numerous applications. △ Less

Submitted 18 October, 2018; originally announced November 2018.

Quantitative indexing and Tardigrade analysis of exoplanets

Authors: J. M. Kashyap

Abstract: Search of life elsewhere in the galaxy is very fascinating area for planetary scientists and astrobiologists. Earth Similarity Index (ESI) is defined as geometrical mean of four physical parameters (Such as radius, density, escape velocity and surface temperature), which is ranging from 1 (identical to Earth) to 0 (dissimilar to Earth). In this work, ESI is re-defined as six parameters by introduc… ▽ More Search of life elsewhere in the galaxy is very fascinating area for planetary scientists and astrobiologists. Earth Similarity Index (ESI) is defined as geometrical mean of four physical parameters (Such as radius, density, escape velocity and surface temperature), which is ranging from 1 (identical to Earth) to 0 (dissimilar to Earth). In this work, ESI is re-defined as six parameters by introducing the two new physical parameters like revolution and surface gravity and is called as New Earth Similarity Index (NESI). The main focus of this paper is to search Tardigrade water-life on exoplanets by varying the temperature parameter in NESI, which is called as Tardigrade Similarity Index (TSI), which is ranging from 1 (Tardigrade can survive) to 0 (Tardigrade Cannot survive). Here the NESI and TSI is cataloged and analyzed for almost 3370 confirmed exoplanets. △ Less

Submitted 13 February, 2017; originally announced February 2017.

Comments: 5 pages

Propagation of Acoustic Waves in Troposphere and Stratosphere

Authors: J. M. Kashyap, S. Routh, M. G. Maithri

Abstract: Acoustic waves are those waves which travel with the speed of sound through a medium. H. Lamb has derived a cutoff frequency for stratified and isothermal medium for the propagation of acoustic waves. In order to find the cutoff frequency many methods were introduced after Lamb's work. In this paper, we have chosen the method to determine cutoff frequencies for acoustic waves propagating in non-is… ▽ More Acoustic waves are those waves which travel with the speed of sound through a medium. H. Lamb has derived a cutoff frequency for stratified and isothermal medium for the propagation of acoustic waves. In order to find the cutoff frequency many methods were introduced after Lamb's work. In this paper, we have chosen the method to determine cutoff frequencies for acoustic waves propagating in non-isothermal media. This turning point frequency method can be applied to various atmospheres like solar atmosphere, stellar atmosphere, earth's atmosphere etc. Here, we have analytically derived the cutoff frequency and have graphically analyzed and compared with the Lamb's cut-off frequencyfor earth's troposphere, lower and upper stratosphere. △ Less

Submitted 27 January, 2017; v1 submitted 13 September, 2016; originally announced September 2016.

Comments: This paper will be replaced as this work as there is a debate from the author Dr. Swati Routh