-
Quantitative evaluation method for magnetoelastic coupling between surface acoustic waves and spin waves using electrical and optical measurements
Authors:
Haruka Komiyama,
Ryusuke Hisatomi,
Kotaro Taga,
Hiroki Matsumoto,
Takahiro Moriyama,
Hideki Narita,
Shutaro Karube,
Yoichi Shiota,
Teruo Ono
Abstract:
Coupling and hybridization of different elementary excitations leads to new functionalities. In phononics and spintronics, magnetoelastic coupling between Rayleigh-type surface acoustic wave (SAW) and spin wave (SW) has recently attracted much attention. Quantitatively evaluating and comparing the coupled system are essential to develop the study of the magnetoelastic SAW-SW coupling. So far, prev…
▽ More
Coupling and hybridization of different elementary excitations leads to new functionalities. In phononics and spintronics, magnetoelastic coupling between Rayleigh-type surface acoustic wave (SAW) and spin wave (SW) has recently attracted much attention. Quantitatively evaluating and comparing the coupled system are essential to develop the study of the magnetoelastic SAW-SW coupling. So far, previous studies of SAW-SW coupling have employed a quantity called coupling strength. However, it is still challenging to compare the coupling strength values among studies fairly because the quantity depends on the device geometry and the applied magnetic field angle, which are not unified among the previous studies. Here, we focus on a practical constant composed of a magnetoelastic constant and a strain amplitude that depends only on the material properties. We demonstrate a versatile evaluation technique to evaluate the practical constant by combining electrical measurements and optical imaging. An essential part of the technique is an analysis that can be used under off-resonance conditions where SAW and SW resonance frequencies do not match. Existing analysis can only handle the case under on-resonance conditions. Our analysis makes it possible to observe the magnetoelastic couplings between SAW with resonance frequencies that can be imaged optically and SW with resonance frequencies in the gigahertz range. Our demonstrated technique, which uses electrical and optical measurements under off-resonance conditions, can significantly advance research on SAW-SW coupled systems.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
Handedness manipulation of propagating antiferromagnetic magnons
Authors:
Yoichi Shiota,
Tomohiro Taniguchi,
Daiju Hayashi,
Hideki Narita,
Shutaro Karube,
Ryusuke Hisatomi,
Takahiro Moriyama,
Teruo Ono
Abstract:
Antiferromagnetic magnons possess a distinctive feature absent in their ferromagnetic counterparts: the presence of two distinct handedness modes, the right-handed (RH) and left-handed (LH) precession modes. The magnon handedness determines the sign of spin polarization carried by the propagating magnon, which is indispensable for harnessing the diverse functionalities. However, the control of coh…
▽ More
Antiferromagnetic magnons possess a distinctive feature absent in their ferromagnetic counterparts: the presence of two distinct handedness modes, the right-handed (RH) and left-handed (LH) precession modes. The magnon handedness determines the sign of spin polarization carried by the propagating magnon, which is indispensable for harnessing the diverse functionalities. However, the control of coherently propagating magnon handedness in antiferromagnets has remained elusive so far. Here we demonstrate the manipulation and electrical readout of propagating magnon handedness in perpendicularly magnetized synthetic antiferromagnets (SAF). We find that the antiferromagnetic magnon handedness can be directly identified by measuring the inverse spin Hall effect (ISHE) voltage, which arises from the spin pum** effect caused by the propagating antiferromagnetic magnons in the SAF structure. The RH and LH modes of the magnon can be distinguishable particularly when the SAF structure is sandwiched by heavy metals with the same sign of spin Hall angle. Moreover, we succeed in controlling the handedness of propagating antiferromagnetic magnons by tuning the excitation microwave frequency. This work unveils promising avenues for harnessing magnon unique properties in antiferromagnet-based magnonic applications.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Observation of spin-splitter torque in collinear antiferromagnetic RuO$_2$
Authors:
Shutaro Karube,
Takahiro Tanaka,
Daichi Sugawara,
Naohiro Kadoguchi,
Makoto Kohda,
Junsaku Nitta
Abstract:
The spin-splitter effect is theoretically predicted to generate an unconventional spin current with $\mathit{x}$- and $\mathit{z}$- spin polarization via the spin-split band in antiferromagnets. The generated torque, namely spin-splitter torque, is effective for the manipulation of magnetization in an adjacent magnetic layer without an external magnetic field for spintronic devices such as MRAM. H…
▽ More
The spin-splitter effect is theoretically predicted to generate an unconventional spin current with $\mathit{x}$- and $\mathit{z}$- spin polarization via the spin-split band in antiferromagnets. The generated torque, namely spin-splitter torque, is effective for the manipulation of magnetization in an adjacent magnetic layer without an external magnetic field for spintronic devices such as MRAM. Here, we study the generation of torque in collinear antiferromagnetic RuO$_2$ with (100), (101), and (001) crystal planes. Next we find all $\mathit{x}$-, $\mathit{y}$-, and $\mathit{z}$-polarized spin currents depending on the Néel vector direction in RuO$_2$(101). For RuO$_2$(100) and (001), only $\mathit{y}$-polarized spin current was present, which is independent of the Néel vector. Using the $\mathit{z}$-polarized spin currents, we demonstrate field-free switching of the perpendicular magnetized ferromagnet at room temperature. The spin-splitter torque generated from RuO$_2$ is verified to be useful for the switching phenomenon and paves the way for a further understanding of the detailed mechanism of the spin-splitter effect and for develo** antiferromagnetic spin-orbitronics.
△ Less
Submitted 14 November, 2021;
originally announced November 2021.
-
Observation of unconventional spin polarization induced spin orbit torque in L1$_2$-ordered antiferromagnetic Mn$_3$Pt thin films
Authors:
Longjie Yu,
Shutaro Karube,
Min Liu,
Masakiyo Tsunoda,
Mikihiko Oogane,
Yasuo Ando
Abstract:
Non-collinear antiferromagnets exhibits richer magneto-transport properties due to the topologically nontrivial spin structure they possess compared to conventional nonmagnetic materials, which allows us to manipulate the charge-spin conversion more freely by taking advantage of the chirality. In this work, we explore the unconventional spin orbit torque of L1$_2$-ordered Mn$_3$Pt with a triangula…
▽ More
Non-collinear antiferromagnets exhibits richer magneto-transport properties due to the topologically nontrivial spin structure they possess compared to conventional nonmagnetic materials, which allows us to manipulate the charge-spin conversion more freely by taking advantage of the chirality. In this work, we explore the unconventional spin orbit torque of L1$_2$-ordered Mn$_3$Pt with a triangular spin structure. We observed an unconventional spin orbit torque along the $\mathbf{x}$-direction for the (001)-oriented L1$_2$ Mn$_3$Pt, and found that it has a unique sign reversal behavior relative to the crystalline orientation. This generation of unconventional spin orbit torque for L1$_2$-ordered Mn$_3$Pt can be interpreted as stemming from the magnetic spin Hall effect. This report help clarify the correlation between the topologically nontrivial spin structure and charge-spin conversion in non-collinear antiferromagnets.
△ Less
Submitted 21 September, 2021; v1 submitted 15 September, 2021;
originally announced September 2021.
-
Anomalous spin-orbit field via Rashba-Edelstein effect at W/Pt interface
Authors:
Shutaro Karube,
Nobuki Tezuka,
Makoto Kohda,
Junsaku Nitta
Abstract:
We have studied spin-orbit (SO) field in Ni$_{80}$Fe$_{20}$(Py)/W/Pt trilayer by means of spin-torque ferromagnetic resonance, and demonstrated that the W/Pt interface generates an extra SO field acting on the Py layer. This unprecedented field originates from the following three processes, 1) spin accumulation at W/Pt interface via the Rashba-Edelstein effect, 2) diffusive spin transport in the W…
▽ More
We have studied spin-orbit (SO) field in Ni$_{80}$Fe$_{20}$(Py)/W/Pt trilayer by means of spin-torque ferromagnetic resonance, and demonstrated that the W/Pt interface generates an extra SO field acting on the Py layer. This unprecedented field originates from the following three processes, 1) spin accumulation at W/Pt interface via the Rashba-Edelstein effect, 2) diffusive spin transport in the W layer, and 3) spin absorption into the Py layer through accumulation at the Py/W interface. Our result means that we can create extra SO field away from the ferromagnet/ metal interface and control its strength by a combination of two different metals.
△ Less
Submitted 30 October, 2019; v1 submitted 17 June, 2019;
originally announced June 2019.
-
Clear variation of spin splitting by changing electron distribution at non-magnetic metal/Bi2O3 interfaces
Authors:
Hanshen Tsai,
Shutaro Karube,
Kouta Kondou,
Naoya Yamaguchi,
Fumiyuki Ishii,
Yoshichika Otani
Abstract:
Large spin splitting at Rashba interface, giving rise to strong spin-momentum locking, is essential for efficient spin-to-charge conversion. Recently, a Cu/Bismuth oxide (Bi2O3) interface has been found to exhibit an efficient spin-to-charge conversion similar to a Ag/Bi interface with large Rashba spin splitting. However, the guiding principle of designing the metal/oxide interface for the effici…
▽ More
Large spin splitting at Rashba interface, giving rise to strong spin-momentum locking, is essential for efficient spin-to-charge conversion. Recently, a Cu/Bismuth oxide (Bi2O3) interface has been found to exhibit an efficient spin-to-charge conversion similar to a Ag/Bi interface with large Rashba spin splitting. However, the guiding principle of designing the metal/oxide interface for the efficient conversion has not been clarified yet. Here we report strong non-magnetic (NM) material dependence of spin splitting at NM/Bi2O3 interfaces. We employed spin pum** technique to inject spin current into the interface and evaluated the magnitude of interfacial spin-to-charge conversion. We observed large modulation and sign change in conversion coefficient which corresponds to the variation of spin splitting. Our experimental results together with first-principles calculations indicate that such large variation is caused by material dependent electron distribution near the interface. The results suggest that control of interfacial electron distribution by tuning the difference in work function across the interface may be an effective way to tune the magnitude and sign of spin-to-charge conversion and Rashba parameter at interface.
△ Less
Submitted 18 March, 2018;
originally announced March 2018.
-
Evaluation of bulk-interface contributions to Edelstein magnetoresistance at metal/oxide interfaces
Authors:
Junyeon Kim,
Yan-Ting Chen,
Shutaro Karube,
Saburo Takahashi,
Kouta Kondou,
Gen Tatara,
YoshiChika Otani
Abstract:
We report a systematic study on Edelstein magnetoresistance (Edelstein MR) in Co25Fe75/Cu/Bi2O3 heterostructures with a strong spin-orbit interaction at the Cu/Bi2O3 interface. We succeed in observing a significant dependence of the Edelstein MR on both Cu layer thickness and temperature, and also develop a general analytical model considering distinct bulk and interface contributions on spin rela…
▽ More
We report a systematic study on Edelstein magnetoresistance (Edelstein MR) in Co25Fe75/Cu/Bi2O3 heterostructures with a strong spin-orbit interaction at the Cu/Bi2O3 interface. We succeed in observing a significant dependence of the Edelstein MR on both Cu layer thickness and temperature, and also develop a general analytical model considering distinct bulk and interface contributions on spin relaxation. Our analysis, based on the above model, quantitatively illustrates a unique property of the spin transport near the Rashba interface, revealing a prominent role of the spin relaxation process by determining the ratios of the spin relaxation inside and outside the interface. We further find the characteristic spin transport is unaffected by temperature. Our results provide an essential tool for exploring the transport in a system with spin-momentum-locked two-dimensional states.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
Experimental observation of spin to charge current conversion at non-magnetic metal/Bi2O3 interfaces
Authors:
Shutaro Karube,
Kouta Kondou,
YoshiChika Otani
Abstract:
We here demonstrate the interfacial spin to charge current conversion by means of spin pum** from a ferromagnetic Permalloy (Py: Ni80Fe20) to a Cu/Bi2O3 interface. A clear signature of the spin to charge current conversion was observed in voltage spectrum of a Py/Cu/Bi2O3 trilayer film whereas no signature in a Py/Cu and Py/Bi2O3 bilayer films. We also found that the conversion coefficient stron…
▽ More
We here demonstrate the interfacial spin to charge current conversion by means of spin pum** from a ferromagnetic Permalloy (Py: Ni80Fe20) to a Cu/Bi2O3 interface. A clear signature of the spin to charge current conversion was observed in voltage spectrum of a Py/Cu/Bi2O3 trilayer film whereas no signature in a Py/Cu and Py/Bi2O3 bilayer films. We also found that the conversion coefficient strongly depended on Cu thickness, reflecting the thickness dependent momentum relaxation time in Cu layer.
△ Less
Submitted 17 January, 2016;
originally announced January 2016.
-
Spin relaxation characteristics in Ag nanowire covered with various oxides
Authors:
Shutaro Karube,
Hiroshi Idzuchi,
Kouta Kondou,
Yasuhiro Fukuma,
YoshiChika Otani
Abstract:
We have studied spin relaxation characteristics in a Ag nanowire covered with various oxide layers of Bi2O3, Al2O3, HfO2, MgO or AgOx by using non-local spin valve structures. The spin-flip probability, a ratio of momentum relaxation time to spin relaxation time at 10 K, exhibits a gradual increase with an atomic number of the oxide constituent elements, Mg, Al, Ag and Hf. Surprisingly the Bi2O3 c…
▽ More
We have studied spin relaxation characteristics in a Ag nanowire covered with various oxide layers of Bi2O3, Al2O3, HfO2, MgO or AgOx by using non-local spin valve structures. The spin-flip probability, a ratio of momentum relaxation time to spin relaxation time at 10 K, exhibits a gradual increase with an atomic number of the oxide constituent elements, Mg, Al, Ag and Hf. Surprisingly the Bi2O3 cap** was found to increase the probability by an order of magnitude compared with other oxide layers. This finding suggests the presence of an additional spin relaxation mechanism such as Rashba effect at the Ag/Bi2O3 interface, which cannot be explained by the simple Elliott-Yafet mechanism via phonon, impurity and surface scatterings. The Ag/Bi2O3 interface may provide functionality as a spin to charge interconversion layer.
△ Less
Submitted 6 September, 2015; v1 submitted 24 July, 2015;
originally announced July 2015.
