-
Ray-Optics Simulations of Outdoor-to-Indoor Multipath Channels at 4 and 14 GHz
Authors:
Pasi Koivumäki,
Aki Karttunen,
Katsuyuki Haneda
Abstract:
Radio wave propagation simulations based on the ray-optical approximation have been widely adopted in coverage analysis for a range of situations, including the outdoor-to-indoor scenario. This work presents O2I ray-tracing simulations utilizing a complete office building floor plan in the form of a laser-scanned point cloud. The simulated radio channels are compared to their measured counterparts…
▽ More
Radio wave propagation simulations based on the ray-optical approximation have been widely adopted in coverage analysis for a range of situations, including the outdoor-to-indoor scenario. This work presents O2I ray-tracing simulations utilizing a complete office building floor plan in the form of a laser-scanned point cloud. The simulated radio channels are compared to their measured counterparts at 4 and 14 GHz in terms of path loss and delay and angular spreads. Validation of channel simulations for the O2I case is rare, and so far non-existent for above-$6$~GHz bands. This work reveals the importance of a floor plan model in accurately simulating the channel; it is confirmed that path loss can be replicated with a simple interior path loss model in place of a detailed building interior model, but neglecting to model the interior results in high delay and angular spread errors. By modeling the interior, the ray-tracing simulations achieve relative mean error of under 10% for delay and angular spreads. Finally, effects of multi-layer insulating window on propagation simulations are reported. Noticeable variation of the penetration loss on a small change of the incident angle of a propagation path causes large changes in estimated coverage.
△ Less
Submitted 13 January, 2023; v1 submitted 6 October, 2022;
originally announced October 2022.
-
Hierarchy of beam models for lattice core sandwich structures
Authors:
Anssi T. Karttunen,
J. N. Reddy
Abstract:
A discrete-to-continuum transformation to model 2-D discrete lattices as energetically equivalent 1-D continuum beams is developed. The study is initiated in a classical setting but results in a non-classical two-scale micropolar beam model via a novel link within a unit cell between the second-order macrorotation-gradient and the micropolar antisymmetric shear deformation. The shear deformable mi…
▽ More
A discrete-to-continuum transformation to model 2-D discrete lattices as energetically equivalent 1-D continuum beams is developed. The study is initiated in a classical setting but results in a non-classical two-scale micropolar beam model via a novel link within a unit cell between the second-order macrorotation-gradient and the micropolar antisymmetric shear deformation. The shear deformable micropolar beam is reduced to a couple-stress and two classical lattice beam models by successive approximations. The stiffness parameters for all models are given by the micropolar constitutive matrix. The four models are compared by studying stretching- and bending-dominated lattice core sandwich beams under various loads and boundary conditions. A classical 4th-order Timoshenko beam is an apt first choice for stretching-dominated beams, whereas the 6th-order micropolar model works for bending-dominated beams as well. The 6th-order couple-stress beam is often too stiff near point loads and boundaries. It is shown that the 1-D micropolar model leads to the exact 2-D lattice response in the absence of boundary effects even when the length of the 1-D beam (macrostructure) equals that of the 2-D unit cell (microstructure), that is, when L=l.
△ Less
Submitted 18 October, 2020; v1 submitted 13 October, 2020;
originally announced October 2020.
-
Fe3Se4: A Possible Ferrimagnetic Half-Metal?
Authors:
Girish C. Tewari,
Divya Srivastava,
Reijo Pohjonen,
Otto Mustonen,
Antti J. Karttunen,
Johan Lindén,
Maarit Karppinen
Abstract:
Half-metallic ferromagnets show 100% spin-polarization at the Fermi level and are ideal candidates for spintronic applications. Despite the extensive research in the field, very few materials have been discovered so far. Here we present results of electronic band structure calculations based on density functional theory and extensive physical-property measurements for Fe3Se4 revealing signatures o…
▽ More
Half-metallic ferromagnets show 100% spin-polarization at the Fermi level and are ideal candidates for spintronic applications. Despite the extensive research in the field, very few materials have been discovered so far. Here we present results of electronic band structure calculations based on density functional theory and extensive physical-property measurements for Fe3Se4 revealing signatures of half-metallicity. The spin-polarized electronic band structure calculations predict half-metallic ferrimagnetism for Fe3Se4. The electrical resistivity follows exponentially suppressed electron-magnon scattering mechanism in the low-temperature regime and show a magnetoresistance effect that changes the sign from negative to positive with decreasing temperature around 100 K. Other intriguing observations include the anomalous behavior of Hall resistance below 100 K and an anomalous Hall coefficient that roughly follows the \r{ho}2 behavior.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
Nonlinear finite element analysis of lattice core sandwich plates
Authors:
Praneeth Nampally,
Anssi T. Karttunen,
JN Reddy
Abstract:
A displacement-based, geometrically nonlinear finite element model is developed for lattice core sandwich panels modeled as 2-D equivalent single-layer (ESL), first-order shear deformation theory (FSDT) micropolar plates. The nonlinearity is due to the moderate macrorotations of the plate which are modeled by including the von Karman strains in the micropolar strain measures. Weak form Galerkin me…
▽ More
A displacement-based, geometrically nonlinear finite element model is developed for lattice core sandwich panels modeled as 2-D equivalent single-layer (ESL), first-order shear deformation theory (FSDT) micropolar plates. The nonlinearity is due to the moderate macrorotations of the plate which are modeled by including the von Karman strains in the micropolar strain measures. Weak form Galerkin method with linear Lagrange interpolations is used to develop the displacement-based finite element model. Selective reduced integration is used to eliminate shear locking and membrane locking. The novel finite element model is used to study the nonlinear bending and linear free vibrations of web-core and pyramid core sandwich panels. Clamped and free edge boundary conditions are considered for the first time for the 2-D micropolar ESL-FSDT plate theory. The present 2-D finite element results are in good agreement with the corresponding detailed 3-D FE results for the lattice core sandwich panels. The 2-D element provides computationally cost-effective solutions; in a nonlinear bending example, the number of elements required for the 2-D micropolar plate is of the order 10^3, whereas for the corresponding 3-D model the order is 10^5.
△ Less
Submitted 13 October, 2020; v1 submitted 6 April, 2020;
originally announced May 2020.
-
Electronic Band Structures of Pristine and Chemically Modified Cellulose Allomorphs
Authors:
Divya Srivastava,
Mikhail S. Kuklin,
Jouni Ahopelto,
Antti J. Karttunen
Abstract:
We have investigated the structural properties, vibrational spectra, and electronic band structures of crystalline cellulose allomorphs and chemically modified cellulose with quantum chemical methods. The electronic band gaps of cellulose allomorphs I$_α$, I$_β$, II, and III$_1$ lie in the range of 5.0 to 5.6 eV. We show that extra states can be created in the band gap of cellulose by chemical mod…
▽ More
We have investigated the structural properties, vibrational spectra, and electronic band structures of crystalline cellulose allomorphs and chemically modified cellulose with quantum chemical methods. The electronic band gaps of cellulose allomorphs I$_α$, I$_β$, II, and III$_1$ lie in the range of 5.0 to 5.6 eV. We show that extra states can be created in the band gap of cellulose by chemical modification. Experimentally feasible amidation of cellulose I$_β$ with aniline or 4,4'- diaminoazobenzene creates narrow bands in the cellulose band gap, reducing the difference between the occupied and empty states to 4.0 or 1.8 eV, respectively. The predicted states 4,4'-diaminoazobenzene-modified cellulose I$_β$ fall in the visible spectrum, suggesting uses in optical applications.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Two-scale micropolar plate model for web-core sandwich panels
Authors:
Anssi T. Karttunen,
JN Reddy,
Jani Romanoff
Abstract:
A 2-D micropolar equivalent single-layer (ESL), first-order shear deformation (FSDT) plate model for 3-D web-core sandwich panels is developed. First, a 3-D web-core unit cell is modeled by classical shell finite elements. A discrete-to-continuum transformation is applied to the microscale unit cell and its strain and kinetic energy densities are expressed in terms of the macroscale 2-D plate kine…
▽ More
A 2-D micropolar equivalent single-layer (ESL), first-order shear deformation (FSDT) plate model for 3-D web-core sandwich panels is developed. First, a 3-D web-core unit cell is modeled by classical shell finite elements. A discrete-to-continuum transformation is applied to the microscale unit cell and its strain and kinetic energy densities are expressed in terms of the macroscale 2-D plate kinematics. The hyperelastic constitutive relations and the equations of motion (via Hamilton's principle) for the plate are derived by assuming energy equivalence between the 3-D unit cell and the 2-D plate. The Navier solution is developed for the 2-D micropolar ESL-FSDT plate model to study the bending, buckling, and free vibration of simply-supported web-core sandwich panels. In a line load bending problem, a 2-D classical ESL-FSDT plate model yields displacement errors of 34-175% for face sheet thicknesses of 2-10 mm compared to a 3-D FE solution, whereas the 2-D micropolar model gives only small errors of 2.7-3.4% as it can emulate the 3-D deformations better through non-classical antisymmetric shear behavior and local bending and twisting.
△ Less
Submitted 5 November, 2019; v1 submitted 10 October, 2019;
originally announced October 2019.
-
A nonlinear couple stress-based sandwich beam theory
Authors:
Bruno Reinaldo Goncalves,
Anssi T. Karttunen,
Jani Romanoff
Abstract:
A geometrically nonlinear sandwich beam model founded on the modified couple stress Timoshenko beam theory with Kármán kinematics is derived and employed in the analysis of periodic sandwich structures. The constitutive model is based on the mechanical behavior of sandwich beams, with the bending response split into membrane-induced and local bending modes. A micromechanical approach based on the…
▽ More
A geometrically nonlinear sandwich beam model founded on the modified couple stress Timoshenko beam theory with Kármán kinematics is derived and employed in the analysis of periodic sandwich structures. The constitutive model is based on the mechanical behavior of sandwich beams, with the bending response split into membrane-induced and local bending modes. A micromechanical approach based on the structural analysis of a unit cell is derived and utilized to obtain the stiffness properties of selected prismatic cores. The model is shown to be equivalent to the classical thick-face sandwich theory for the same basic assumptions. A two-node finite element interpolated with linear and cubic shape functions is proposed and its stiffness and geometric stiffness matrices are derived. Three examples illustrate the model capabilities in predicting deflections, stresses and critical buckling loads of elastic sandwich beams including elastic size effects. Good agreement is obtained throughout in comparisons with more involved finite element models.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Path Loss Characterization for Intra-Vehicle Wearable Deployments at 60 GHz
Authors:
Vasilii Semkin,
Aleksei Ponomarenko-Timofeev,
Aki Karttunen,
Olga Galinina,
Sergey Andreev,
Yevgeni Koucheryavy
Abstract:
In this work, we present the results of a wideband measurement campaign at 60 GHz conducted inside a Linkker electric city bus. Targeting prospective millimeter-wave (mmWave) public transportation wearable scenarios, we mimic a typical deployment of mobile high-end consumer devices in a dense environment. Specifically, our intra-vehicle deployment includes one receiver and multiple transmitters co…
▽ More
In this work, we present the results of a wideband measurement campaign at 60 GHz conducted inside a Linkker electric city bus. Targeting prospective millimeter-wave (mmWave) public transportation wearable scenarios, we mimic a typical deployment of mobile high-end consumer devices in a dense environment. Specifically, our intra-vehicle deployment includes one receiver and multiple transmitters corresponding to a mmWave access point and passengers' wearable and hand-held devices. While the receiver is located in the front part of the bus, the transmitters repeat realistic locations of personal devices (i) at the seat level (e.g., a hand-held device) and (ii) at a height 70 cm above the seat (e.g., a wearable device: augmented reality glasses or a head-mounted display). Based on the measured received power, we construct a logarithmic model for the distance-dependent path loss. The parametrized models developed in the course of this study have the potential to become an attractive ground for the link budget estimation and interference footprint studies in crowded public transportation scenarios.
△ Less
Submitted 31 January, 2019;
originally announced February 2019.
-
Nonlinear finite element analysis of lattice core sandwich beams
Authors:
Praneeth Nampally,
Anssi T. Karttunen,
JN Reddy
Abstract:
A geometrically nonlinear finite element model is developed for the bending analysis of micropolar Timoshenko beams using the principle of virtual displacements and linear Lagrange interpolation functions. The nonlinearity enters the model via a nonlinear von Kármán strain term that allows the micropolar beam to undergo moderate rotations. The nonlinear micropolar Timoshenko beam is used as an equ…
▽ More
A geometrically nonlinear finite element model is developed for the bending analysis of micropolar Timoshenko beams using the principle of virtual displacements and linear Lagrange interpolation functions. The nonlinearity enters the model via a nonlinear von Kármán strain term that allows the micropolar beam to undergo moderate rotations. The nonlinear micropolar Timoshenko beam is used as an equivalent single layer model to study four different lattice core sandwich beams. A two-scale energy method is used to derive the micropolar constitutive equations for web, hexagonal, Y-frame and corrugated core topologies. Various bending cases are studied numerically using the developed 1-D finite element model. Reduced integration techniques are used to overcome the shear and membrane locking. The present 1-D results are in good agreement with the corresponding 2-D finite element beam frame results for global bending.
△ Less
Submitted 27 February, 2019; v1 submitted 2 January, 2019;
originally announced January 2019.
-
Two-scale constitutive modeling of a lattice core sandwich beam
Authors:
Anssi T. Karttunen,
JN Reddy,
Jani Romanoff
Abstract:
Constitutive equations are derived for a 1-D micropolar Timoshenko beam made of a web-core lattice material. First, a web-core unit cell is modeled by discrete classical constituents, i.e., the Euler-Bernoulli beam finite elements (FE). A discrete-to-continuum transformation is applied to the microscale unit cell and its strain energy density is expressed in terms of the macroscale 1-D beam kinema…
▽ More
Constitutive equations are derived for a 1-D micropolar Timoshenko beam made of a web-core lattice material. First, a web-core unit cell is modeled by discrete classical constituents, i.e., the Euler-Bernoulli beam finite elements (FE). A discrete-to-continuum transformation is applied to the microscale unit cell and its strain energy density is expressed in terms of the macroscale 1-D beam kinematics. Then the constitutive equations for the micropolar web-core beam are derived assuming strain energy equivalence between the microscale unit cell and the macroscale beam. A micropolar beam FE model for static and dynamic problems is developed using a general solution of the beam equilibrium equations. A localization method for the calculation of periodic classical beam responses from micropolar results is given. The 1-D beam model is used in linear bending and vibration problems of 2-D web-core sandwich panels that have flexible joints. Localized 1-D results are shown to be in good agreement with experimental and 2-D FE beam frame results.
△ Less
Submitted 18 October, 2018; v1 submitted 15 October, 2018;
originally announced October 2018.
-
Modeling the Multipath Cross-Polarization Ratio for Above-6 GHz Radio Links
Authors:
Aki Karttunen,
Jan Järveläinen,
Sinh Le Hong Nguyen,
Katsuyuki Haneda
Abstract:
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover…
▽ More
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover overestimates the depolarization effect. Our measurements revealed a clear trend that the MPC XPR is inversely proportional to an excess loss in reference to the free-space path loss. The model is physically sound as a higher excess loss is attributed to more lossy interactions or to a greater number of interactions with objects, leading to a greater chance of depolarization. The measurements furthermore showed that the MPC XPR is not strongly frequency or environment dependent. In our MPC XPR model, an MPC with zero-dB excess loss has a mean XPR of 28 dB. The mean XPR decreases half-a-dB as the excess loss increases by every dB and the standard deviation around the mean is 6 dB. The model is applicable to existing channel models to reproduce realistic MPC XPRs for the above 6-GHz radio links.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Massive Multiple Input Massive Multiple Output for 5G Wireless Backhauling
Authors:
Dinh-Thuy Phan-Huy,
Philippe Ratajczak,
Raffaele D'Errico,
Jan Jarvelainen,
Di Kong,
Katsuyuki Haneda,
Berna Bulut,
Aki Karttunen,
Mark Beach,
Evangelos Mellios,
Mario Castaneda,
Mythri Hunukumbure,
Tommy Svensson
Abstract:
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other.…
▽ More
In this paper, we propose a new technique for the future fifth generation cellular network wireless backhauling. We show that hundreds of bits per second per Hertz (bits per second per Hz) of spectral efficiency can be attained at a high carrier frequency (such as 26 GHz) between large antenna arrays deployed along structures (such as lamp posts) that are close and roughly parallel to each other. Hundreds of data streams are spatially multiplexed through a short range and line of sight massive multiple input massive multiple output propagation channel thanks to a new low complexity spatial multiplexing scheme, called block discrete Fourier transform based spatial multiplexing with maximum ratio transmission. Its performance in real and existing environments is assessed using accurate ray-tracing tools and antenna models. In the best simulated scenario, 1.6 kbits per second per Hz of spectral efficiency is attained, corresponding to 80% of Singular Value Decomposition performance, with a transmitter and a receiver that are 200 and 10,000 times less complex, respectively.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
Micropolar modeling approach for periodic sandwich beams
Authors:
Anssi T. Karttunen,
JN Reddy,
Jani Romanoff
Abstract:
We develop a micropolar Timoshenko beam theory and use it to model web-core sandwich beams. The beam theory is derived by a vector approach and the general displacement solution to the governing sixth-order equations is given. A nodally-exact micropolar Timoshenko beam element is formulated using the solution. Bending and shear stiffnesses for a micropolar web-core sandwich beam are determined thr…
▽ More
We develop a micropolar Timoshenko beam theory and use it to model web-core sandwich beams. The beam theory is derived by a vector approach and the general displacement solution to the governing sixth-order equations is given. A nodally-exact micropolar Timoshenko beam element is formulated using the solution. Bending and shear stiffnesses for a micropolar web-core sandwich beam are determined through unit cell analysis where the split of the shear forces into symmetric and antisymmetric parts plays a pivotal role. Static bending of web-core beams is studied using the micropolar model as well as modified couple-stress and classical Timoshenko beams. The 1-D micropolar results are in best agreement with 2-D web-core beam frame results. This is because the micropolar beam allows antisymmetric shear deformation to emerge at locations where the 2-D web-core deformations cannot be reduced to 1-D by considering only symmetric shear behavior.
△ Less
Submitted 23 February, 2018; v1 submitted 22 February, 2018;
originally announced February 2018.
-
Comparing Radio Propagation Channels Between 28 and 140 GHz Bands in a Shop** Mall
Authors:
Sinh Le Hong Nguyen,
Jan Jarvelainen,
Aki Karttunen,
Katsuyuki Haneda,
Jyri Putkonen
Abstract:
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal t…
▽ More
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal that there is high spatial-temporal correlation between 28 and 140 GHz channels, similar numbers of strong multipath components, and only small variations in the large-scale parameters between the two bands. Furthermore, when including the weak paths there are higher total numbers of clusters and paths in 28 GHz as compared to those in 140 GHz bands. With these similarities, it would be very interesting to investigate the potentials of using 140 GHz band in the future mobile radio communications.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
On the Frequency Dependency of Radio Channel's Delay Spread: Analyses and Findings From mmMAGIC Multi-frequency Channel Sounding
Authors:
Sinh L. H. Nguyen,
Jonas Medbo,
Michael Peter,
Aki Karttunen,
Katsuyuki Haneda,
Aliou Bamba,
Raffaele D'Errico,
Naveed Iqbal,
Cheikh Diakhate,
Jean-Marc Conrat
Abstract:
This paper analyzes the frequency dependency of the radio propagation channel's root mean square (rms) delay spread (DS), based on the multi-frequency measurement campaigns in the mmMAGIC project. The campaigns cover indoor, outdoor, and outdoor-to-indoor (O2I) scenarios and a wide frequency range from 2 to 86 GHz. Several requirements have been identified that define the parameters which need to…
▽ More
This paper analyzes the frequency dependency of the radio propagation channel's root mean square (rms) delay spread (DS), based on the multi-frequency measurement campaigns in the mmMAGIC project. The campaigns cover indoor, outdoor, and outdoor-to-indoor (O2I) scenarios and a wide frequency range from 2 to 86 GHz. Several requirements have been identified that define the parameters which need to be aligned in order to make a reasonable comparison among the different channel sounders employed for this study. A new modelling approach enabling the evaluation of the statistical significance of the model parameters from different measurements and the establishment of a unified model is proposed. After careful analysis, the conclusion is that any frequency trend of the DS is small considering its confidence intervals. There is statistically significant difference from the 3GPP New Radio (NR) model TR 38.901, except for the O2I scenario.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
-
Ab initio study on lattice thermal conductivity of Cu$_2$O using GGA and hybrid density functional methods
Authors:
J. Linnera,
A. J. Karttunen
Abstract:
Lattice thermal conductivity of Cu$_2$O was studied using ab initio density functional methods. The performance of generalized gradient approximation, GGA-PBE, and PBE0 exchange-correlation functionals was compared for various electronic and phonon-related properties. 3d transition metal oxides such as Cu$_2$O are known to be a challenging case for pure GGA functionals and in comparison to GGA-PBE…
▽ More
Lattice thermal conductivity of Cu$_2$O was studied using ab initio density functional methods. The performance of generalized gradient approximation, GGA-PBE, and PBE0 exchange-correlation functionals was compared for various electronic and phonon-related properties. 3d transition metal oxides such as Cu$_2$O are known to be a challenging case for pure GGA functionals and in comparison to GGA-PBE the PBE0 hybrid functional clearly improves the description of both electronic and phonon-related properties. The most striking difference is found in the lattice thermal conductivity, where GGA underestimates it as much as 40% in comparison to experiment, while the difference between the experiment and the PBE0 hybrid functional is only a few percent.
△ Less
Submitted 3 July, 2017;
originally announced July 2017.
-
Ab initio computational study on the lattice thermal conductivity of Zintl clathrates [Si$_{19}$P$_{4}$]Cl$_{4}$ and Na$_{4}$[Al$_{4}$Si$_{19}$]
Authors:
Ville J. Härkönen,
Antti J. Karttunen
Abstract:
The lattice thermal conductivity of silicon clathrate framework Si$_{23}$ and two Zintl clathrates, [Si$_{19}$P$_{4}$]Cl$_{4}$ and Na$_{4}$[Al$_{4}$Si$_{19}$], is investigated by using an iterative solution of the linearized Boltzmann transport equation (BTE) in conjuntion with ab initio lattice dynamical techniques. At 300 K, the lattice thermal conductivities for Si$_{23}$, [Si$_{19}$P$_{4}$]Cl…
▽ More
The lattice thermal conductivity of silicon clathrate framework Si$_{23}$ and two Zintl clathrates, [Si$_{19}$P$_{4}$]Cl$_{4}$ and Na$_{4}$[Al$_{4}$Si$_{19}$], is investigated by using an iterative solution of the linearized Boltzmann transport equation (BTE) in conjuntion with ab initio lattice dynamical techniques. At 300 K, the lattice thermal conductivities for Si$_{23}$, [Si$_{19}$P$_{4}$]Cl$_{4}$, and Na$_{4}$[Al$_{4}$Si$_{19}$] were found to be 43 W/(m K), 25 W/(m K), and 2 W/(m K), respectively. In the case of Na$_{4}$[Al$_{4}$Si$_{19}$], the order-of-magnitude reduction in the lattice thermal conductivity was found to be mostly due to relaxation times and group velocities differing from Si$_{23}$ and [Si$_{19}$P$_{4}$]Cl$_{4}$. The difference in the relaxation times and group velocities arises primarily due to the phonon spectrum at low frequencies, resulting eventually from the differences in the second-order interatomic force constants (IFCs). The obtained third-order IFCs were rather similar for all materials considered here.
△ Less
Submitted 24 April, 2016;
originally announced April 2016.
-
Ab initio studies on the lattice thermal conductivity of silicon clathrate frameworks II and VIII
Authors:
Ville J. Härkönen,
Antti J. Karttunen
Abstract:
The lattice thermal conductivities of silicon clathrate frameworks II and VIII are investigated by using ab initio lattice dynamics and iterative solution of the linearized Boltzmann transport equation(BTE) for phonons. Within the temperature range 100-350 K, the clathrate structures II and VIII were found to have lower lattice thermal conductivity values than silicon diamond structure (d-Si) by f…
▽ More
The lattice thermal conductivities of silicon clathrate frameworks II and VIII are investigated by using ab initio lattice dynamics and iterative solution of the linearized Boltzmann transport equation(BTE) for phonons. Within the temperature range 100-350 K, the clathrate structures II and VIII were found to have lower lattice thermal conductivity values than silicon diamond structure (d-Si) by factors of 1/2 and 1/5, respectively. The main reason for the lower lattice thermal conductivity of the clathrate structure II in comparison to d-Si was found to be the harmonic phonon spectra, while in the case of the clathrate structure VIII, the difference is mainly due to the harmonic phonon spectra and partly due to shorter relaxation times of phonons. In the studied clathrate frameworks, the anharmonic effects have larger impact on the lattice thermal conductivity than the size of the unit cell. For the structure II, the predicted lattice thermal conductivity differs approximately by factor of 20 from the previous experimental results obtained for a polycrystalline sample at room temperature.
△ Less
Submitted 14 January, 2016; v1 submitted 7 October, 2015;
originally announced October 2015.
-
Ab initio lattice dynamical studies of silicon clathrate frameworks and their negative thermal expansion
Authors:
Ville J. Härkönen,
Antti J. Karttunen
Abstract:
The thermal and lattice dynamical properties of seven silicon clathrate framework structures are investigated with ab initio density functional methods (frameworks I, II, IV, V, VII, VIII, and H). The negative thermal expansion (NTE) phenomenon is investigated by means of quasiharmonic approximation and applying it to equal time displacement correlation functions. The thermal properties of the stu…
▽ More
The thermal and lattice dynamical properties of seven silicon clathrate framework structures are investigated with ab initio density functional methods (frameworks I, II, IV, V, VII, VIII, and H). The negative thermal expansion (NTE) phenomenon is investigated by means of quasiharmonic approximation and applying it to equal time displacement correlation functions. The thermal properties of the studied clathrate frameworks, excluding the VII framework, resemble those of the crystalline silicon diamond structure. The clathrate framework VII was found to have anomalous NTE temperature range up to 300 K and it is suitable for further studies of the mechanisms of NTE. Investigation of the displacement correlation functions revealed that in NTE, the volume derivatives of the mean square displacements and mean square relative displacements of atoms behave similarly to the vibrational entropy volume derivatives and consequently to the coefficients of thermal expansion as a function of temperature. All studied clathrate frameworks, excluding the VII framework, possess a phonon band gap or even two in the case of the framework V.
△ Less
Submitted 6 January, 2014;
originally announced January 2014.
