Showing 1–50 of 91 results for author: Karlin, I

Probing double distribution function models in the lattice Boltzmann method for highly compressible flows

Authors: S. A. Hosseini, A. Bhadauria, I. V. Karlin

Abstract: The double distribution function approach is an efficient route towards extension of kinetic solvers to compressible flows. With a number of realizations available, an overview and comparative study in the context of high speed compressible flows is presented. We discuss the different variants of the energy partition, analyses of hydrodynamic limits and a numerical study of accuracy and performanc… ▽ More The double distribution function approach is an efficient route towards extension of kinetic solvers to compressible flows. With a number of realizations available, an overview and comparative study in the context of high speed compressible flows is presented. We discuss the different variants of the energy partition, analyses of hydrodynamic limits and a numerical study of accuracy and performance with the particles on demand realization. Out of three considered energy partition strategies, it is shown that the non-translational energy split requires a higher-order quadrature for proper recovery of the Navier--Stokes--Fourier equations. The internal energy split on the other hand, while recovering the correct hydrodynamic limit with fourth-order quadrature, comes with a non-local --both in space and time-- source term which contributes to higher computational cost and memory overhead. Based on our analysis, the total energy split demonstrates the optimal overall performance. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Rigorous Hydrodynamics for Linear Boltzmann Equations and Viscosity-Capillarity

Authors: Florian Kogelbauer, Ilya Karlin

Abstract: We propose a general mechanism to rigorously derive an exact, closed system for the hydrodynamic variables from linear kinetic models. Our approach, based on spectral theory, structural properties of eigenvectors and the theory of slow manifolds, allows us to define a unique, optimal reduction in phase space close to the global equilibrium distribution. The hydrodynamically constrained system indu… ▽ More We propose a general mechanism to rigorously derive an exact, closed system for the hydrodynamic variables from linear kinetic models. Our approach, based on spectral theory, structural properties of eigenvectors and the theory of slow manifolds, allows us to define a unique, optimal reduction in phase space close to the global equilibrium distribution. The hydrodynamically constrained system induces a modification of entropy that ensures pure viscous dissipation on the hydrodynamic manifold, which is interpreted as a non-local variant of Korteweg's theory of viscosity-capillarity balance. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Lattice Boltzmann methods for combustion applications

Authors: S. A. Hosseini, P. Boivin, D. Thevenin, I. Karlin

Abstract: The lattice Boltzmann method, after close to thirty years of presence in computational fluid dynamics has turned into a versatile, efficient and quite popular numerical tool for fluid flow simulations. The lattice Boltzmann method owes its popularity in the past decade to its efficiency, low numerical dissipation and simplicity of its algorithm. Progress in recent years has opened the door for yet… ▽ More The lattice Boltzmann method, after close to thirty years of presence in computational fluid dynamics has turned into a versatile, efficient and quite popular numerical tool for fluid flow simulations. The lattice Boltzmann method owes its popularity in the past decade to its efficiency, low numerical dissipation and simplicity of its algorithm. Progress in recent years has opened the door for yet another very challenging area of application: Combustion simulations. Combustion is known to be a challenge for numerical tools due to, among many others, the large number of variables and scales both in time and space, leading to a stiff multi-scale problem. In the present work we present a comprehensive overview of models and strategies developed in the past years to model combustion with the lattice Boltzmann method and discuss some of the most recent applications, remaining challenges and prospects. △ Less

Submitted 15 September, 2023; v1 submitted 14 September, 2023; originally announced September 2023.

Asymptotic freedom in the lattice Boltzmann theory

Authors: Seyed Ali Hosseini, Ilya Karlin

Abstract: Asymptotic freedom is a feature of quantum chromodynamics that guarantees its well-posedeness. We derive an analog of asymptotic freedom enabling unconditional stability of lattice Boltzmann simulation of hydrodynamics. For the lattice Boltzmann models of nearly-incompressible flow, we show that the equilibrium based on entropy maximization is uniquely renormalizable. This results in a practical a… ▽ More Asymptotic freedom is a feature of quantum chromodynamics that guarantees its well-posedeness. We derive an analog of asymptotic freedom enabling unconditional stability of lattice Boltzmann simulation of hydrodynamics. For the lattice Boltzmann models of nearly-incompressible flow, we show that the equilibrium based on entropy maximization is uniquely renormalizable. This results in a practical algorithm of constructing unconditionally stable lattice Boltzmann models. △ Less

Submitted 6 August, 2023; originally announced August 2023.

Spectral Closure for the Linear Boltzmann-BGK Equation

Authors: Florian Kogelbauer, Ilya Karlin

Abstract: We give an explicit description of the spectral closure for the three-dimensional linear Boltzmann-BGK equation in terms of the macroscopic fields, density, flow velocity and temperature. This results in a new linear fluid dynamics model which is valid for any relaxation time. The non-local exact fluid dynamics equations are compared to the Euler, Navier--Stokes and Burnett equations. Our results… ▽ More We give an explicit description of the spectral closure for the three-dimensional linear Boltzmann-BGK equation in terms of the macroscopic fields, density, flow velocity and temperature. This results in a new linear fluid dynamics model which is valid for any relaxation time. The non-local exact fluid dynamics equations are compared to the Euler, Navier--Stokes and Burnett equations. Our results are based on a detailed spectral analysis of the linearized Boltzmann-BGK operator together with a suitable choice of spectral projection. △ Less

Submitted 12 June, 2023; originally announced June 2023.

High speed flows with Particles on Demand: Boundary Conditions

Authors: Abhimanyu Bhadauria, Ilya Karlin

Abstract: The particles on demand (PonD) method is a new kinetic theory model that allows for simulation of high speed compressible flows. While standard Lattice-Boltzmann is limited by a fixed reference frame, significantly reducing the range of applicable of Mach numbers, PonD takes advantage of adaptive reference frames to get rid of the restrictions of standard LB and is able to simulate flows at high s… ▽ More The particles on demand (PonD) method is a new kinetic theory model that allows for simulation of high speed compressible flows. While standard Lattice-Boltzmann is limited by a fixed reference frame, significantly reducing the range of applicable of Mach numbers, PonD takes advantage of adaptive reference frames to get rid of the restrictions of standard LB and is able to simulate flows at high speeds and with large temperature gradients. Previously, PonD has been shown to be a viable alternative for simulation of flows with strong discontinuities and for detonation modelling. However, treatment of flows with complex boundaries has been lacking. Here, we present PonD augmented with a non-equilibrium extrapolation based boundary condition. We present several compressible test cases such as shock-vortex interaction in the Schardin's Problem and supersonic flow over a two-dimensional cylinder at Mach numbers up to 5. We observe that the results agree well with literature, paving the way for a kinetic theory based approach for simulating compressible flows in realistic scenarios. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Spectral Analysis and Hydrodynamic Manifolds for the Linearized Shakhov Model

Authors: Florian Kogelbauer, Ilya Karlin

Abstract: We perform a complete spectral analysis of the linearized Shakhov model involving two relaxation times $τ_{\rm fast}$ and $τ_{\rm slow}$. Our results are based on spectral functions derived from the theory of finite-rank perturbations, which allows us to infer the existence of a critical wave number $k_{\rm crit}$ limiting the number of discrete eigenvalues above the essential spectrum together wi… ▽ More We perform a complete spectral analysis of the linearized Shakhov model involving two relaxation times $τ_{\rm fast}$ and $τ_{\rm slow}$. Our results are based on spectral functions derived from the theory of finite-rank perturbations, which allows us to infer the existence of a critical wave number $k_{\rm crit}$ limiting the number of discrete eigenvalues above the essential spectrum together with the existence of a finite-dimensional slow manifold defining non-local hydrodynamics. We discuss the merging of hydrodynamic modes as well as the existence of second sound and the appearance of ghost modes beneath the essential spectrum in dependence of the Prandtl number. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: arXiv admin note: text overlap with arXiv:2301.03069

Entropic equilibrium for the lattice Boltzmann method: Hydrodynamics and numerical properties

Authors: S. A. Hosseini, I. V. Karlin

Abstract: The entropic lattice Boltzmann framework proposed the construction of the discrete equilibrium by taking into consideration minimization of a discrete entropy functional. The effect of this form of the discrete equilibrium on properties of the resulting solver has been the topic of discussions in the literature. Here we present a rigorous analysis of the hydrodynamics and numerics of the entropic.… ▽ More The entropic lattice Boltzmann framework proposed the construction of the discrete equilibrium by taking into consideration minimization of a discrete entropy functional. The effect of this form of the discrete equilibrium on properties of the resulting solver has been the topic of discussions in the literature. Here we present a rigorous analysis of the hydrodynamics and numerics of the entropic. In doing so we demonstrate that the entropic equilibrium features unconditional linear stability, in contrast to the conventional polynomial equilibrium. We reveal the mechanisms through which unconditional linear stability is guaranteed, most notable of which the adaptive normal modes propagation velocity and the positive-definite nature of the dissipation rates of all eigen-modes. We further present a simple local correction to considerably reduce the deviations in the effective bulk viscosity. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Particles on Demand method: theoretical analysis, simplification techniques and model extensions

Authors: N. G. Kallikounis, I. V. Karlin

Abstract: The Particles on Demand method [B. Dorschner, F. Bösch and I. V. Karlin, {\it Phys. Rev. Lett.} {\bf 121}, 130602 (2018)] was recently formulated with a conservative finite volume discretization and validated against challenging benchmarks. In this work, we rigorously analyze the properties of the reference frame transformation and its implications on the accuracy of the model. Based on these cons… ▽ More The Particles on Demand method [B. Dorschner, F. Bösch and I. V. Karlin, {\it Phys. Rev. Lett.} {\bf 121}, 130602 (2018)] was recently formulated with a conservative finite volume discretization and validated against challenging benchmarks. In this work, we rigorously analyze the properties of the reference frame transformation and its implications on the accuracy of the model. Based on these considerations, we propose strategies to boost the efficiency of the scheme and to reduce the computational cost. Additionally, we generalize the model such that it includes a tunable Prandlt number via quasi-equilibrium relaxation. Finally, we adapt concepts from the multi-scale semi-Lagrangian lattice Boltzmann formulation to the proposed framework, further improving the potential and the operating range of the kinetic model. Numerical simulations of high Mach compressible flows demonstrate excellent accuracy and stability of the model over a wide range of conditions. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Exact Hydrodynamic Manifolds for the Linearized Three-Dimensional Boltzmann BGK Equation

Authors: Florian Kogelbauer, Ilya Karlin

Abstract: We perform a complete spectral analysis of the linear three-dimensional Boltzmann BGK operator resulting in an explicit transcendental equation for the eigenvalues. Using the theory of finite-rank perturbations, we prove that there exists a critical wave number $k_{crit}$ which limits the number of hydrodynamic modes in the frequency space. This implies that there are only finitely many isolated e… ▽ More We perform a complete spectral analysis of the linear three-dimensional Boltzmann BGK operator resulting in an explicit transcendental equation for the eigenvalues. Using the theory of finite-rank perturbations, we prove that there exists a critical wave number $k_{crit}$ which limits the number of hydrodynamic modes in the frequency space. This implies that there are only finitely many isolated eigenvalues above the essential spectrum, thus showing the existence of a finite-dimensional, well-separated linear hydrodynamic manifold as a combination of invariant eigenspaces. The obtained results can serve as a benchmark for validating approximate theories of hydrodynamic closures and moment methods. △ Less

Submitted 8 January, 2023; originally announced January 2023.

Lattice Boltzmann for non-ideal fluids: Fundamentals and Practice

Authors: S. A. Hosseini, I. V. Karlin

Abstract: This contribution presents a comprehensive overview of of lattice Boltzmann models for non-ideal fluids, covering both theoretical concepts at both kinetic and macroscopic levels and more practical discussion of numerical nature. In that context, elements of kinetic theory of ideal gases are presented and discussed at length. Then a detailed discussion of the lattice Boltzmann method for ideal gas… ▽ More This contribution presents a comprehensive overview of of lattice Boltzmann models for non-ideal fluids, covering both theoretical concepts at both kinetic and macroscopic levels and more practical discussion of numerical nature. In that context, elements of kinetic theory of ideal gases are presented and discussed at length. Then a detailed discussion of the lattice Boltzmann method for ideal gases from discretization to Galilean invariance issues and different collision models along with their effect on stability and consistency at the hydrodynamic level is presented. Extension to non-ideal fluids is then introduced in the context of the kinetic theory of gases along with the corresponding thermodynamics at the macroscopic level, i.e. the van der Waals fluid, followed by an overview of different lattice Boltzmann based models for non-ideal fluids. After an in-depth discussion of different well-known issues and artifacts and corresponding solutions, the article finishes with a brief discussion on most recent applications of such models and extensions proposed in the literature towards non-isothermal and multi-component flows. △ Less

Submitted 5 January, 2023; originally announced January 2023.

Exploring shock-capturing schemes for Particles on Demand simulation of compressible flows

Authors: Ehsan Reyhanian, Benedikt Dorschner, Ilya Karlin

Abstract: In this exploratory study, we apply shock-capturing schemes within the framework of the Particles on Demand kinetic model to simulate compressible flows with mild and strong shock waves and discontinuities. The model is based on the semi-Lagrangian method where the information propagates along the characteristics while a set of shock-capturing concepts such as the total variation diminishing and w… ▽ More In this exploratory study, we apply shock-capturing schemes within the framework of the Particles on Demand kinetic model to simulate compressible flows with mild and strong shock waves and discontinuities. The model is based on the semi-Lagrangian method where the information propagates along the characteristics while a set of shock-capturing concepts such as the total variation diminishing and weighted essentially non-oscillatory schemes are employed to capture the discontinuities and the shock-waves. The results show that the reconstruction schemes are able to remove the oscillations at the location of the shock waves and together with the Galilean invariance nature of the Particles on Demand model, stable simulations of mild to extreme compressible benchmarks can be carried out. Moreover, the essential numerical properties of the reconstruction schemes such as their spectral analysis and order of accuracy are discussed. △ Less

Submitted 19 July, 2022; originally announced July 2022.

Detonation modeling with the Particles on Demand method

Authors: N. Sawant, B. Dorschner, I. V. Karlin

Abstract: A kinetic model based on the Particles on Demand method is introduced for gas phase detonation hydrodynamics in conjunction with the Lee--Tarver reaction model. The proposed model is realized on two- and three-dimensional lattices and is validated with a set of benchmarks. Quantitative validation is performed with the Chapman--Jouguet theory up to a detonation wave speed of Mach 20 in one dimensio… ▽ More A kinetic model based on the Particles on Demand method is introduced for gas phase detonation hydrodynamics in conjunction with the Lee--Tarver reaction model. The proposed model is realized on two- and three-dimensional lattices and is validated with a set of benchmarks. Quantitative validation is performed with the Chapman--Jouguet theory up to a detonation wave speed of Mach 20 in one dimension. Two-dimensional outward expanding circular detonation is tested for isotropy of the model as well as for the asymptotic detonation wave speed. Mach reflection angles are verified in setups consisting of interacting strong bow shocks emanating from detonation. Spherical detonation is computed to show viability of the proposed model for three dimensional simulations. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: Submitted to Physics of Fluids. 11 pages, 10 figures

Particles on Demand for flows with strong discontinuities

Authors: N. G. Kallikounis, B. Dorschner, I. V. Karlin

Abstract: Particles on Demand formulation of kinetic theory [B. Dorschner, F. Bösch and I. V. Karlin, {\it Phys. Rev. Lett.} {\bf 121}, 130602 (2018)] is used to simulate a variety of compressible flows with strong discontinuities in density, pressure and velocity. Two modifications are applied to the original formulation of the Particles on Demand method. First, a regularization by Grad's projection of par… ▽ More Particles on Demand formulation of kinetic theory [B. Dorschner, F. Bösch and I. V. Karlin, {\it Phys. Rev. Lett.} {\bf 121}, 130602 (2018)] is used to simulate a variety of compressible flows with strong discontinuities in density, pressure and velocity. Two modifications are applied to the original formulation of the Particles on Demand method. First, a regularization by Grad's projection of particles populations is combined with the reference frame transformations in order to enhance stability and accuracy. Second, a finite-volume scheme is implemented which allows tight control of mass, momentum and energy conservation. The proposed model is validated with an array of challenging one- and two-dimensional benchmarks of compressible flows, including hypersonic and near-vacuum situations, Richtmyer-Meshkov instability, double Mach reflection and astrophysical jet. Excellent performance of the modified Particles on Demand method is demonstrated beyond the limitations of other lattice Boltzmann-like approaches to compressible flows. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Entropic multi-relaxation-time lattice Boltzmann model for large density ratio two-phase flows

Authors: S. A. Hosseini, B. Dorschner, I. V. Karlin

Abstract: We propose a multiple relaxation time entropic realization of a two-phase flow lattice Boltzmann model we introduced in earlier works arXiv:2112.01975 S.A. Hosseini, B. Dorschner, and I. V. Karlin, arXiv preprint, arXiv:2112.01975 (2021). While the original model with a single relaxation time allows us to reach large density ratios, it is limited in terms of stability with respect to non-dimension… ▽ More We propose a multiple relaxation time entropic realization of a two-phase flow lattice Boltzmann model we introduced in earlier works arXiv:2112.01975 S.A. Hosseini, B. Dorschner, and I. V. Karlin, arXiv preprint, arXiv:2112.01975 (2021). While the original model with a single relaxation time allows us to reach large density ratios, it is limited in terms of stability with respect to non-dimensional viscosity and Courant--Friedrichs--Lewy number. Here we show that the entropic multiple relaxation time model extends the stability limits of the model significantly, which allows us to reach larger Reynolds numbers for a given grid resolution. The thermodynamic properties of the solver, using the Peng--Robinson equation of state, are studied first using simple configurations. Co-existence densities and temperature scaling of both the interface thickness and the surface tension are shown to agree well with theory. The model is then used to simulate the impact of a drop onto a thin liquid film with density and viscosity ratios matching those of water and air both in 2-D and 3-D. The results are in very good agreement with theoretically predicted scaling laws and experimental data. △ Less

Submitted 4 May, 2022; v1 submitted 28 January, 2022; originally announced January 2022.

Understanding Power and Energy Utilization in Large Scale Production Physics Simulation Codes

Authors: Brian S. Ryu**, Arturo Vargas, Ian Karlin, Shawn A. Dawson, Kenneth Weiss, Adam Bertsch, M. Scott McKinley, Michael R. Collette, Si D. Hammond, Kevin Pedretti, Robert N. Rieben

Abstract: Power is an often-cited reason for moving to advanced architectures on the path to Exascale computing. This is due to the practical concern of delivering enough power to successfully site and operate these machines, as well as concerns over energy usage while running large simulations. Since accurate power measurements can be difficult to obtain, processor thermal design power (TDP) is a possible… ▽ More Power is an often-cited reason for moving to advanced architectures on the path to Exascale computing. This is due to the practical concern of delivering enough power to successfully site and operate these machines, as well as concerns over energy usage while running large simulations. Since accurate power measurements can be difficult to obtain, processor thermal design power (TDP) is a possible surrogate due to its simplicity and availability. However, TDP is not indicative of typical power usage while running simulations. Using commodity and advance technology systems at Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratory, we performed a series of experiments to measure power and energy usage in running simulation codes. These experiments indicate that large scale LLNL simulation codes are significantly more efficient than a simple processor TDP model might suggest. △ Less

Submitted 4 January, 2022; originally announced January 2022.

Comments: 13 pages

Is Disaggregation possible for HPC Cognitive Simulation?

Authors: Michael R Wyatt II, Valen Yamamoto, Zoe Tosi, Ian Karlin, Brian Van Essen

Abstract: Cognitive simulation (CogSim) is an important and emerging workflow for HPC scientific exploration and scientific machine learning (SciML). One challenging workload for CogSim is the replacement of one component in a complex physical simulation with a fast, learned, surrogate model that is "inside" of the computational loop. The execution of this in-the-loop inference is particularly challenging b… ▽ More Cognitive simulation (CogSim) is an important and emerging workflow for HPC scientific exploration and scientific machine learning (SciML). One challenging workload for CogSim is the replacement of one component in a complex physical simulation with a fast, learned, surrogate model that is "inside" of the computational loop. The execution of this in-the-loop inference is particularly challenging because it requires frequent inference across multiple possible target models, can be on the simulation's critical path (latency bound), is subject to requests from multiple MPI ranks, and typically contains a small number of samples per request. In this paper we explore the use of large, dedicated Deep Learning / AI accelerators that are disaggregated from compute nodes for this CogSim workload. We compare the trade-offs of using these accelerators versus the node-local GPU accelerators on leadership-class HPC systems. △ Less

Submitted 9 December, 2021; originally announced December 2021.

Towards a consistent lattice Boltzmann model for two-phase fluid

Authors: S. A. Hosseini, B. Dorschner, I. V. Karlin

Abstract: We propose a kinetic framework for single-component non-ideal isothermal flows. Starting from a kinetic model for a non-ideal fluid, we show that under conventional scaling the Navier-Stokes equations with a non-ideal equation of state are recovered in the hydrodynamic limit. A scaling based on the smallness of velocity increments is then introduced, which recovers the full Navier-Stokes-Korteweg… ▽ More We propose a kinetic framework for single-component non-ideal isothermal flows. Starting from a kinetic model for a non-ideal fluid, we show that under conventional scaling the Navier-Stokes equations with a non-ideal equation of state are recovered in the hydrodynamic limit. A scaling based on the smallness of velocity increments is then introduced, which recovers the full Navier-Stokes-Korteweg equations. The proposed model is realized on a standard lattice and validated on a variety of benchmarks. Through a detailed study of thermodynamic properties including co-existence densities, surface tension, Tolman length and sound speed, we show thermodynamic consistency, well-posedness and convergence of the proposed model. Furthermore, hydrodynamic consistency is demonstrated by verification of Galilean invariance of the dissipation rate of shear and normal modes and the study of visco-capillary coupling effects. Finally, the model is validated on dynamic test cases in three dimensions with complex geometries and large density ratios such as drop impact on textured surfaces and mercury drops coalescence. △ Less

Submitted 3 December, 2021; originally announced December 2021.

Efficient Exascale Discretizations: High-Order Finite Element Methods

Authors: Tzanio Kolev, Paul Fischer, Misun Min, Jack Dongarra, Jed Brown, Veselin Dobrev, Tim Warburton, Stanimire Tomov, Mark S. Shephard, Ahmad Abdelfattah, Valeria Barra, Natalie Beams, Jean-Sylvain Camier, Noel Chalmers, Yohann Dudouit, Ali Karakus, Ian Karlin, Stefan Kerkemeier, Yu-Hsiang Lan, David Medina, Elia Merzari, Aleksandr Obabko, Will Pazner, Thilina Rathnayake, Cameron W. Smith , et al. (5 additional authors not shown)

Abstract: Efficient exploitation of exascale architectures requires rethinking of the numerical algorithms used in many large-scale applications. These architectures favor algorithms that expose ultra fine-grain parallelism and maximize the ratio of floating point operations to energy intensive data movement. One of the few viable approaches to achieve high efficiency in the area of PDE discretizations on u… ▽ More Efficient exploitation of exascale architectures requires rethinking of the numerical algorithms used in many large-scale applications. These architectures favor algorithms that expose ultra fine-grain parallelism and maximize the ratio of floating point operations to energy intensive data movement. One of the few viable approaches to achieve high efficiency in the area of PDE discretizations on unstructured grids is to use matrix-free/partially-assembled high-order finite element methods, since these methods can increase the accuracy and/or lower the computational time due to reduced data motion. In this paper we provide an overview of the research and development activities in the Center for Efficient Exascale Discretizations (CEED), a co-design center in the Exascale Computing Project that is focused on the development of next-generation discretization software and algorithms to enable a wide range of finite element applications to run efficiently on future hardware. CEED is a research partnership involving more than 30 computational scientists from two US national labs and five universities, including members of the Nek5000, MFEM, MAGMA and PETSc projects. We discuss the CEED co-design activities based on targeted benchmarks, miniapps and discretization libraries and our work on performance optimizations for large-scale GPU architectures. We also provide a broad overview of research and development activities in areas such as unstructured adaptive mesh refinement algorithms, matrix-free linear solvers, high-order data visualization, and list examples of collaborations with several ECP and external applications. △ Less

Submitted 10 September, 2021; originally announced September 2021.

Comments: 22 pages, 18 figures

Consistent lattice Boltzmann model for reactive mixtures

Authors: N. Sawant, B. Dorschner, I. V. Karlin

Abstract: A new lattice Boltzmann model (LBM) for chemically reactive mixtures is presented. The approach capitalizes on the recently introduced thermodynamically consistent LBM for multicomponent mixtures of ideal gases. Similar to the non-reactive case, the present LBM features Stefan--Maxwell diffusion of chemical species and a fully on-lattice mean-field realization of the momentum and energy of the flo… ▽ More A new lattice Boltzmann model (LBM) for chemically reactive mixtures is presented. The approach capitalizes on the recently introduced thermodynamically consistent LBM for multicomponent mixtures of ideal gases. Similar to the non-reactive case, the present LBM features Stefan--Maxwell diffusion of chemical species and a fully on-lattice mean-field realization of the momentum and energy of the flow. Besides introducing the reaction mechanism into the kinetic equations for the species, the proposed LBM also features a new realization of the compressible flow by using a concept of extended equilibrium on a standard lattice in three dimensions. The full thermodynamic consistency of the original non-reactive multicomponent LBM enables to extend the temperature dynamics to the reactive mixtures by merely including the enthalpy of formation in addition to the previously considered sensible energy. Furthermore, we describe in detail the boundary conditions to be used for reactive flows of practical interest. The model is validated against a direct numerical simulation of various burning regimes of a hydrogen/air mixture in a microchannel, in two and three dimensions. Excellent comparison in these demanding benchmarks indicates that the proposed LBM can be a valuable and universal model for complex reactive flows. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Lattice Boltzmann method for fluid-structure interaction in compressible flow

Authors: Abhimanyu Bhadauria, Benedikt Dorschner, Ilya Karlin

Abstract: We present a two-way coupled fluid-structure interaction scheme for rigid bodies using a two-population lattice Boltzmann formulation for compressible flows. Arbitrary Lagrangian-Eulerian formulation of the discrete Boltzmann equation on body-fitted meshes is used in a combination with polynomial blending functions. The blending function approach localizes mesh deformation and allows treating mult… ▽ More We present a two-way coupled fluid-structure interaction scheme for rigid bodies using a two-population lattice Boltzmann formulation for compressible flows. Arbitrary Lagrangian-Eulerian formulation of the discrete Boltzmann equation on body-fitted meshes is used in a combination with polynomial blending functions. The blending function approach localizes mesh deformation and allows treating multiple moving bodies with a minimal computational overhead. We validate the model with several test cases of vortex induced vibrations of single and tandem cylinders and show that it can accurately describe dynamic behavior of these systems. Finally, in the fully compressible regime, we demonstrate that the proposed model accurately captures complex phenomena such as transonic flutter over an airfoil. △ Less

Submitted 3 July, 2021; originally announced July 2021.

Multi-scale semi-Lagrangian lattice Boltzmann method

Authors: N. G. Kallikounis, B. Dorschner, I. V. Karlin

Abstract: We present a multi-scale lattice Boltzmann scheme, which adaptively refines particles' velocity space. Different velocity sets, i.e., higher- and lower-order lattices, are consistently and efficiently coupled, allowing us to use the higher-order lattice only when and where needed. This includes regions of either high Mach number or high Knudsen number. The coupling procedure of different lattices… ▽ More We present a multi-scale lattice Boltzmann scheme, which adaptively refines particles' velocity space. Different velocity sets, i.e., higher- and lower-order lattices, are consistently and efficiently coupled, allowing us to use the higher-order lattice only when and where needed. This includes regions of either high Mach number or high Knudsen number. The coupling procedure of different lattices consists of either projection of the moments of the higher-order lattice onto the lower-order lattice or lifting of the lower-order lattice to the higher-order velocity space. Both lifting and projection are local operations, which enable a flexible adaptive velocity set. The proposed scheme can be formulated both in a static and an optimal, co-moving reference frame, in the spirit of the recently introduced Particles on Demand method. The multi-scale scheme is first validated through a convected athermal vortex and also studied in a jet flow setup. The performance of the proposed scheme is further investigated through the shock structure problem and a high Knudsen Couette flow, typical examples of highly non-equilibrium flows in which the order of the velocity set plays a decisive role. The results demonstrate that the proposed multi-scale scheme can operate accurately, with flexibility in terms of the underlying models and with reduced computational requirements. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. E 103, 063305 (2021)

Extended Lattice Boltzmann Model for Gas Dynamics

Authors: M. H. Saadat, S. A. Hosseini, B. Dorschner, I. V. Karlin

Abstract: We propose a two-population lattice Boltzmann model on standard lattices for the simulation of compressible flows. The model is fully on-lattice and uses the single relaxation time Bhatnagar-Gross-Krook kinetic equations along with appropriate correction terms to recover the Navier-Stokes-Fourier equations. The accuracy and performance of the model are analyzed through simulations of compressible… ▽ More We propose a two-population lattice Boltzmann model on standard lattices for the simulation of compressible flows. The model is fully on-lattice and uses the single relaxation time Bhatnagar-Gross-Krook kinetic equations along with appropriate correction terms to recover the Navier-Stokes-Fourier equations. The accuracy and performance of the model are analyzed through simulations of compressible benchmark cases including Sod shock tube, sound generation in shock-vortex interaction and compressible decaying turbulence in a box with eddy shocklets. It is demonstrated that the present model provides an accurate representation of compressible flows, even in the presence of turbulence and shock waves. △ Less

Submitted 18 February, 2021; originally announced February 2021.

Extended Lattice Boltzmann Model

Authors: M. H. Saadat, B. Dorschner, I. V. Karlin

Abstract: Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for vanishing flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and isotropy of the stress tensor by introducing an extended equilibrium. This modification extends l… ▽ More Conventional lattice Boltzmann models for the simulation of fluid dynamics are restricted by an error in the stress tensor that is negligible only for vanishing flow velocity and at a singular value of the temperature. To that end, we propose a unified formulation that restores Galilean invariance and isotropy of the stress tensor by introducing an extended equilibrium. This modification extends lattice Boltzmann models to simulations with higher values of the flow velocity and can be used at temperatures that are higher than the lattice reference temperature, which enhances computational efficiency by decreasing the number of required time steps. Furthermore, the extended model remains valid also for stretched lattices, which are useful when flow gradients are predominant in one direction. The model is validated by simulations of two- and three-dimensional benchmark problems, including the double shear layer flow, the decay of homogeneous isotropic turbulence, the laminar boundary layer over a flat plate and the turbulent channel flow. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Reactive mixtures with the lattice Boltzmann model

Authors: N. Sawant, B. Dorschner, I. V. Karlin

Abstract: A new lattice Boltzmann model for reactive ideal gas mixtures is presented. The model is an extension to reactive flows of the recently proposed multi-component lattice Boltzmann model for compressible ideal gas mixtures with Stefan-Maxwell diffusion for species interaction. First, the kinetic model for the Stefan--Maxwell diffusion is enhanced to accommodate a source term accounting the change of… ▽ More A new lattice Boltzmann model for reactive ideal gas mixtures is presented. The model is an extension to reactive flows of the recently proposed multi-component lattice Boltzmann model for compressible ideal gas mixtures with Stefan-Maxwell diffusion for species interaction. First, the kinetic model for the Stefan--Maxwell diffusion is enhanced to accommodate a source term accounting the change of the mixture composition due to chemical reaction. Second, by including the heat of formation in the energy equation, the thermodynamic consistency of the underlying compressible lattice Boltzmann model for momentum and energy allows a realization of the energy and temperature change due to chemical reactions. This obviates the need for ad-hoc modelling with source terms for temperature or heat. Both parts remain consistently coupled through mixture composition, momentum, pressure, energy and enthalpy. The proposed model uses the standard three-dimensional lattices and is validated with a set of benchmarks including laminar burning speed in the hydrogen-air mixture and circular expanding premixed flame. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Comments: Submitted to the proceedings of DSFD 2020. Philosophical Transactions of the Royal Society A, Special Issue: Progress in mesoscale methods for fluid dynamics simulation

Kinetic Simulations of Compressible Non-Ideal Fluids: From Supercritical Flows to Phase-Change and Exotic Behavior

Authors: Ehsan Reyhanian, Benedikt Dorschner, Ilya Karlin

Abstract: We investigate a kinetic model for compressible non-ideal fluids [DOI:10.1103/PhysRevE.102.020103]. The model imposes the local thermodynamic pressure through a rescaling of the particles velocities, which accounts for both long- and short-range effects and hence full thermodynamic consistency. The model is fully Galilean invariant and treats mass, momentum and energy as local conservation laws. T… ▽ More We investigate a kinetic model for compressible non-ideal fluids [DOI:10.1103/PhysRevE.102.020103]. The model imposes the local thermodynamic pressure through a rescaling of the particles velocities, which accounts for both long- and short-range effects and hence full thermodynamic consistency. The model is fully Galilean invariant and treats mass, momentum and energy as local conservation laws. The analysis and derivation of the hydrodynamic limit is followed by the assessment of accuracy and robustness through benchmark simulations ranging from Joule-Thompson effect to a phase-change and high-speed flows. In particular, we show the direct simulation of the inversion line of a van der Waals gas followed by simulations of phase-change such as the one-dimensional evaporation of a saturated liquid, nucleate and film boiling and eventually,we investigate the stability of a perturbed strong shock front in two different fluid mediums. In all of the cases, we find excellent agreement with the corresponding theoretical analysis and experimental correlations. We show that our model can operate in the entire phase diagram, including super- as well as sub-critical regimes and inherently captures phase-change phenomena. △ Less

Submitted 1 February, 2021; v1 submitted 2 December, 2020; originally announced December 2020.

Consistent lattice Boltzmann model for multicomponent mixtures

Authors: N. Sawant, B. Dorschner, I. V. Karlin

Abstract: A new lattice Boltzmann model for multicomponent ideal gas mixtures is presented. The model development consists of two parts. First, a new kinetic model for Stefan- Maxwell diffusion amongst the species is proposed and realized as a lattice Boltzmann equation on the standard discrete velocity set. Second, a compressible lattice Boltzmann model for the momentum and energy of the mixture is establi… ▽ More A new lattice Boltzmann model for multicomponent ideal gas mixtures is presented. The model development consists of two parts. First, a new kinetic model for Stefan- Maxwell diffusion amongst the species is proposed and realized as a lattice Boltzmann equation on the standard discrete velocity set. Second, a compressible lattice Boltzmann model for the momentum and energy of the mixture is established. Both parts are consistently coupled through mixture composition, momentum, pressure, energy and enthalpy whereby a passive scalar advection-diffusion coupling is obviated, unlike in previous approaches. The proposed model is realized on the standard three-dimensional lattices and is validated with a set of benchmarks highlighting various physical aspects of compressible mixtures. Stefan-Maxwell diffusion is tested against experiment and theory of uphill diffusion of argon and methane in a ternary mixture with hydrogen. The speed of sound is measured in various binary and ternary compositions. We further validate the Stefan-Maxwell diffusion coupling with hydrodynamics by simulating diffusion in opposed jets and the three-dimensional Kelvin-Helmholtz instability of shear layers in a two-component mixture. Apart from the multicomponent compressible mixture, the proposed lattice Boltzmann model also provides an extension of the lattice Boltzmann equation to the compressible flow regime on the standard three-dimensional lattice. △ Less

Submitted 23 April, 2020; originally announced April 2020.

Journal ref: J. Fluid Mech. 909 (2021) A1

Thermokinetic model of compressible multiphase flows

Authors: Ehsan Reyhanian, Benedikt Dorschner, Ilya Karlin

Abstract: We present a novel approach to kinetic theory modeling enabling the simulation of a generic, real gas presented by its corresponding equation of state. The model is based on mass, momentum and energy conservation, and unlike the lattice Boltzmann models enables simulations of fluids exhibiting a liquid-vapor phase transition in both super- and subcritical states. In this new kinetic theory,an arbi… ▽ More We present a novel approach to kinetic theory modeling enabling the simulation of a generic, real gas presented by its corresponding equation of state. The model is based on mass, momentum and energy conservation, and unlike the lattice Boltzmann models enables simulations of fluids exhibiting a liquid-vapor phase transition in both super- and subcritical states. In this new kinetic theory,an arbitrary equation of state can be introduced through rescaling the discrete particle velocities.Different benchmarks associated with real-gas thermodynamics illustrate that the proposed scheme can handle a wide range of compressible multiphase flows. △ Less

Submitted 24 February, 2020; v1 submitted 21 February, 2020; originally announced February 2020.

Arbitrary Lagrangian-Eulerian formulation of lattice Boltzmann model for compressible flows on unstructured moving meshes

Authors: Mohammad Hossein Saadat, Ilya V. Karlin

Abstract: We propose the application of the arbitrary Lagrangian-Eulerian (ALE) technique to a compressible lattice Boltzmann model for the simulation of moving boundary problems on unstructured meshes. To that end, the kinetic equations are mapped from a moving physical domain into a fixed computational domain. The resulting equations in the computational domain are then numerically solved using the second… ▽ More We propose the application of the arbitrary Lagrangian-Eulerian (ALE) technique to a compressible lattice Boltzmann model for the simulation of moving boundary problems on unstructured meshes. To that end, the kinetic equations are mapped from a moving physical domain into a fixed computational domain. The resulting equations in the computational domain are then numerically solved using the second-order accurate finite element reconstruction on an unstructured mesh. It is shown that the problem regarding the geometric conservation law (GCL), which needs a special treatment in the ALE Navier-Stokes solvers, does not appear here and the model satisfies the GCL exactly. The model is validated with sets of simulations including uniform flow preservation and compressible flow past airfoil with plunging and pitching motions at different Mach numbers. It is demonstrated that the results are in good agreement with the experimental and other available numerical results in the literature. Finally, in order to show the capability of the proposed solver in simulating high-speed flows, transonic flow over pitching airfoil is investigated. It is shown that the proposed model is able to capture the complex characteristics of this flow which involves multiple weak shock waves interacting with the boundary and shear layers. △ Less

Submitted 11 February, 2020; originally announced February 2020.

Wetting boundaries for ternary high density ratio Lattice Boltzmann Method

Authors: Neeru Bala, Marianna Pepona, Ilya Karlin, Halim Kusumaatmaja, Ciro Semprebon

Abstract: We extend a recently proposed ternary free energy lattice Boltzmann model with high density contrast, by incorporating wetting boundaries at solid walls. The approaches are based on forcing and geometric schemes, with implementations optimised for ternary (and more generally higher order multicomponent) models. Advantages and disadvantages of each method are addressed by performing both static and… ▽ More We extend a recently proposed ternary free energy lattice Boltzmann model with high density contrast, by incorporating wetting boundaries at solid walls. The approaches are based on forcing and geometric schemes, with implementations optimised for ternary (and more generally higher order multicomponent) models. Advantages and disadvantages of each method are addressed by performing both static and dynamic tests, including the capillary filling dynamics of a liquid displacing the gas phase, and the self-propelled motion of a train of drops. Furthermore, we measure dynamic angles and show that the slip length critically depends on the equilibrium value of the contact angles, and whether it belongs to liquid-liquid or liquid-gas interfaces. These results validate the model capabilities of simulating complex ternary fluid dynamic problems near solid boundaries, for example drop impact solid substrates covered by a lubricant layer. △ Less

Submitted 15 April, 2019; originally announced April 2019.

Comments: 15 pages, 13 figures

Journal ref: Phys. Rev. E 100, 013308 (2019)

Particles-on-Demand for Kinetic Theory

Authors: B. Dorschner, F. Bösch, I. V. Karlin

Abstract: A novel formulation of fluid dynamics as a kinetic theory with tailored, on-demand constructed particles removes any restrictions on Mach number and temperature as compared to its predecessors, the lattice Boltzmann methods and their modifications. In the new kinetic theory, discrete particles are determined by a rigorous limit process which avoids ad hoc assumptions about their velocities. Classi… ▽ More A novel formulation of fluid dynamics as a kinetic theory with tailored, on-demand constructed particles removes any restrictions on Mach number and temperature as compared to its predecessors, the lattice Boltzmann methods and their modifications. In the new kinetic theory, discrete particles are determined by a rigorous limit process which avoids ad hoc assumptions about their velocities. Classical benchmarks for incompressible and compressible flows demonstrate that the proposed discrete-particles kinetic theory opens up an unprecedented wide domain of applications for computational fluid dynamics. △ Less

Submitted 13 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Lett. 121, 130602 (2018)

Ternary free-energy entropic lattice Boltzmann model with high density ratio

Authors: Moritz Wöhrwag, Ciro Semprebon, Ali Mazloomi Moqaddam, Ilya Karlin, Halim Kusumaatmaja

Abstract: A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of… ▽ More A rigorous free energy model for ternary fluid flows with density ratio up to of order $O(10^3)$ is presented and implemented using the entropic lattice Boltzmann scheme. The model is thermodynamically consistent and allows a broad range of surface tension ratios, covering both partial wetting states where Neumann triangles are formed, and full wetting states where complete encapsulation of one of fluid components is observed. We further demonstrate that we can capture the bouncing, adhesive and insertive regimes for the binary collisions between immiscible droplets suspended in air. Our approach opens up a vast range of multiphase flow applications involving one gas and several liquid components. △ Less

Submitted 11 May, 2018; v1 submitted 20 October, 2017; originally announced October 2017.

Comments: 5 pages, 5 figures, accepted for publication in Physical Review Letters

Journal ref: Phys. Rev. Lett. 120, 234501 (2018)

Fluid-Structure Interaction with the Entropic Lattice Boltzmann Method

Authors: Benedikt Dorschner, Shyam S. Chikatamarla, Ilya V. Karlin

Abstract: We propose a novel fluid-structure interaction (FSI) scheme using the entropic multi-relaxation time lattice Boltzmann (KBC) model for the fluid domain in combination with a nonlinear finite element solver for the structural part. We show validity of the proposed scheme for various challenging set-ups by comparison to literature data. Beyond validation, we extend the KBC model to multiphase flows… ▽ More We propose a novel fluid-structure interaction (FSI) scheme using the entropic multi-relaxation time lattice Boltzmann (KBC) model for the fluid domain in combination with a nonlinear finite element solver for the structural part. We show validity of the proposed scheme for various challenging set-ups by comparison to literature data. Beyond validation, we extend the KBC model to multiphase flows and couple it with FEM solver. Robustness and viability of the entropic multi-relaxation time model for complex FSI applications is shown by simulations of droplet impact on elastic superhydrophobic surfaces. △ Less

Submitted 6 October, 2017; originally announced October 2017.

Journal ref: Phys. Rev. E 97, 023305 (2018)

Beyond Navier--Stokes equations: Capillarity of ideal gas

Authors: A. N. Gorban, I. V. Karlin

Abstract: The system of Navier--Stokes--Fourier equations is one of the most celebrated systems of equations in modern science. It describes dynamics of fluids in the limit when gradients of density, velocity and temperature are sufficiently small, and loses its applicability when the flux becomes so non-equilibrium that the changes of velocity, density or temperature on the length compatible with the mean… ▽ More The system of Navier--Stokes--Fourier equations is one of the most celebrated systems of equations in modern science. It describes dynamics of fluids in the limit when gradients of density, velocity and temperature are sufficiently small, and loses its applicability when the flux becomes so non-equilibrium that the changes of velocity, density or temperature on the length compatible with the mean free path are non-negligible. The question is: how to model such fluxes? This problem is still open. (Despite the fact that the first `final equations of motion' modified for analysis of thermal creep in rarefied gas were proposed by Maxwell in 1879.) There are, at least, three possible answers: (i) use molecular dynamics with individual particles, (ii) use kinetic equations, like Boltzmann's equation, or (iii) find a new system of equations for description of fluid dynamics with better accounting of non-equilibrium effects. These three approaches work at different scales. We explore the third possibility using the recent findings of capillarity of internal layers in ideal gases and of saturation effect in dissipation (there is a limiting attenuation rate for very short waves in ideal gas and it cannot increase infinitely). One candidate equation is discussed in more detail, the Korteweg system proposed in 1901. The main ideas and approaches are illustrated by a kinetic system for which the problem of reduction of kinetics to fluid dynamics is analytically solvable. △ Less

Submitted 2 November, 2017; v1 submitted 2 February, 2017; originally announced February 2017.

Comments: Corrected misprints in Eqs (7) and (22), thanks to E. Azadi

Journal ref: Contemporary Physics, 58(1) (2017), 70-90

Grid refinement for entropic lattice Boltzmann models

Authors: B. Dorschner, N. Frapolli, S. S. Chikatamarla, I. V. Karlin

Abstract: We propose a novel multi-domain grid refinement technique with extensions to entropic incompressible, thermal and compressible lattice Boltzmann models. Its validity and accuracy are accessed by comparison to available direct numerical simulation and experiment for the simulation of isothermal, thermal and viscous supersonic flow. In particular, we investigate the advantages of grid refinement for… ▽ More We propose a novel multi-domain grid refinement technique with extensions to entropic incompressible, thermal and compressible lattice Boltzmann models. Its validity and accuracy are accessed by comparison to available direct numerical simulation and experiment for the simulation of isothermal, thermal and viscous supersonic flow. In particular, we investigate the advantages of grid refinement for the set-ups of turbulent channel flow, flow past a sphere, Rayleigh-Benard convection as well as the supersonic flow around an airfoil. Special attention is payed to analyzing the adaptive features of entropic lattice Boltzmann models for multi-grid simulations. △ Less

Submitted 24 August, 2016; originally announced August 2016.

Comments: submitted to Physical Review E

Entropic Lattice Boltzmann Method for Moving and Deforming Geometries in Three Dimensions

Authors: B. Dorschner, S. S. Chikatamarla, I. V. Karlin

Abstract: Entropic lattice Boltzmann methods have been developed to alleviate intrinsic stability issues of lattice Boltzmann models for under-resolved simulations. Its reliability in combination with moving objects was established for various laminar benchmark flows in two dimensions in our previous work Dorschner et al. [11] as well as for three dimensional one-way coupled simulations of engine-type geome… ▽ More Entropic lattice Boltzmann methods have been developed to alleviate intrinsic stability issues of lattice Boltzmann models for under-resolved simulations. Its reliability in combination with moving objects was established for various laminar benchmark flows in two dimensions in our previous work Dorschner et al. [11] as well as for three dimensional one-way coupled simulations of engine-type geometries in Dorschner et al. [12] for flat moving walls. The present contribution aims to fully exploit the advantages of entropic lattice Boltzmann models in terms of stability and accuracy and extends the methodology to three-dimensional cases including two-way coupling between fluid and structure, turbulence and deformable meshes. To cover this wide range of applications, the classical benchmark of a sedimenting sphere is chosen first to validate the general two-way coupling algorithm. Increasing the complexity, we subsequently consider the simulation of a plunging SD7003 airfoil at a Reynolds number of Re = 40000 and finally, to access the model's performance for deforming meshes, we conduct a two-way coupled simulation of a self-propelled anguilliform swimmer. These simulations confirm the viability of the new fluid-structure interaction lattice Boltzmann algorithm to simulate flows of engineering relevance. △ Less

Submitted 16 August, 2016; originally announced August 2016.

Comments: submitted to Journal of Computational Physics

Journal ref: Phys. Rev. E 95, 063306 (2017)

Drops bouncing off macro-textured superhydrophobic surfaces

Authors: Ali Mazloomi Moqaddam, Shyam S. Chikatamarla, Ilya Karlin

Abstract: Recent experiments with droplets impacting a macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. We present here a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantify the role played by various external and internal forces that effect the dynamics of a drop impacting a complex s… ▽ More Recent experiments with droplets impacting a macro-textured superhydrophobic surfaces revealed new regimes of bouncing with a remarkable reduction of the contact time. We present here a comprehensive numerical study that reveals the physics behind these new bouncing regimes and quantify the role played by various external and internal forces that effect the dynamics of a drop impacting a complex surface. For the first time, three-dimensional simulations involving macro-textured surfaces are performed. Aside from demonstrating that simulations reproduce experiments in a quantitative manner, the study is focused on analyzing the flow situations beyond current experiments. We show that the experimentally observed reduction of contact time extends to higher Weber numbers, and analyze the role played by the texture density. Moreover, we report a non-linear behavior of the contact time with the increase of the Weber number for application relevant imperfectly coated textures, and also study the impact on tilted surfaces in a wide range of Weber numbers. Finally, we present novel energy analysis techniques that elaborate and quantify the interplay between the kinetic and surface energy, and the role played by the dissipation for various Weber numbers. △ Less

Submitted 10 August, 2016; originally announced August 2016.

Entropic multi-relaxation lattice Boltzmann scheme for turbulent flows

Authors: Fabian Bösch, Shyam S. Chikatamarla, Ilya Karlin

Abstract: We present three dimensional realizations of the model introduced recently by (Karlin, Bösch, Chikatamarla, Phys. Rev. E 2014) and review the role of the entropic stabilizer. The presented models achieve outstanding numerical stability in presence of turbulent high Reynolds number flows. We report accurate results for low order moments for homogeneous isotropic decaying turbulence and second order… ▽ More We present three dimensional realizations of the model introduced recently by (Karlin, Bösch, Chikatamarla, Phys. Rev. E 2014) and review the role of the entropic stabilizer. The presented models achieve outstanding numerical stability in presence of turbulent high Reynolds number flows. We report accurate results for low order moments for homogeneous isotropic decaying turbulence and second order grid convergence for most assessed statistical quantities. The explicit and efficient nature of the scheme renders it a very promising candidate for both engineering and scientific purposes in the vicinity of highly turbulent flows. △ Less

Submitted 9 July, 2015; originally announced July 2015.

Entropic Multi-Relaxation Models for Simulation of Fluid Turbulence

Authors: Fabian Bösch, Shyam S. Chikatamarla, Ilya Karlin

Abstract: A recently introduced family of lattice Boltzmann (LB) models (Karlin, Bösch, Chikatamarla, Phys. Rev. E, 2014) is studied in detail for incompressible two-dimensional flows. A framework for develo** LB models based on entropy considerations is laid out extensively. Second order rate of convergence is numerically confirmed and it is demonstrated that these entropy based models recover the Navier… ▽ More A recently introduced family of lattice Boltzmann (LB) models (Karlin, Bösch, Chikatamarla, Phys. Rev. E, 2014) is studied in detail for incompressible two-dimensional flows. A framework for develo** LB models based on entropy considerations is laid out extensively. Second order rate of convergence is numerically confirmed and it is demonstrated that these entropy based models recover the Navier-Stokes solution in the hydrodynamic limit. Comparison with the standard Bhatnagar-Gross-Krook (LBGK) and the entropic lattice Boltzmann method (ELBM) demonstrates the superior stability and accuracy for several benchmark flows and a range of grid resolutions and Reynolds numbers. High Reynolds number regimes are investigated through the simulation of two-dimensional turbulence, particularly for under-resolved cases. Compared to resolved LBGK simulations, the presented class of LB models demonstrate excellent performance and capture the turbulence statistics with good accuracy. △ Less

Submitted 9 July, 2015; originally announced July 2015.

Comments: To be published in Proceedings of Discrete Simulation of Fluid Dynamics DSFD 2014

Rayleigh-Bénard Instability in Graphene

Authors: Oliver Furtmaier, Miller Mendoza, Ilya Karlin, Sauro Succi, Hans Jürgen Herrmann

Abstract: Motivated by the observation that electrons in graphene, in the hydrodynamic regime of transport, can be treated as a two-dimensional ultra-relativistic gas with very low shear viscosity, we examine the existence of the Rayleigh-Bénard instability in a massless electron-hole plasma. Firstly, we perform a linear stability analysis, derive the leading contributions to the relativistic Rayleigh numbe… ▽ More Motivated by the observation that electrons in graphene, in the hydrodynamic regime of transport, can be treated as a two-dimensional ultra-relativistic gas with very low shear viscosity, we examine the existence of the Rayleigh-Bénard instability in a massless electron-hole plasma. Firstly, we perform a linear stability analysis, derive the leading contributions to the relativistic Rayleigh number, and calculate the critical value above which the instability develops. By replacing typical values for graphene, such as thermal conductivity, shear viscosity, temperature, and sample sizes, we find that the instability might be experimentally observed in the near future. Additionally, we have performed simulations for vanishing reduced chemical potential and compare the measured critical Rayleigh number with the theoretical prediction, finding good agreement. △ Less

Submitted 15 January, 2015; v1 submitted 29 October, 2014; originally announced October 2014.

Comments: 10 pages, 9 figures

Non-Perturbative Hydrodynamic Limits

Authors: I. V. Karlin, S. S. Chikatamarla, M. Kooshkbaghi

Abstract: We introduce non-perturbative analytical techniques for the derivation of the hydrodynamic manifolds from kinetic equations. The new approach is analogous to the Schwinger-Dyson equation of quantum field theories, and its derivation is demonstrated with the construction of the exact diffusion manifold for a model kinetic equation. The novel approach is superior to the classical Chapman-Enskog meth… ▽ More We introduce non-perturbative analytical techniques for the derivation of the hydrodynamic manifolds from kinetic equations. The new approach is analogous to the Schwinger-Dyson equation of quantum field theories, and its derivation is demonstrated with the construction of the exact diffusion manifold for a model kinetic equation. The novel approach is superior to the classical Chapman-Enskog method. △ Less

Submitted 26 October, 2013; originally announced October 2013.

Knotted Vortices: Entropic Lattice Boltzmann Method for Vortex Dynamics

Authors: S. S. Chikatamarla, J. Favre, F. Boesch, I. V. Karlin

Abstract: This fluid dynamics video shows "knotted" vortices in real fluids. This fluid dynamics video shows "knotted" vortices in real fluids. △ Less

Submitted 15 October, 2013; v1 submitted 12 October, 2013; originally announced October 2013.

Comments: 2 pages, 1 Video

Hilbert's 6th Problem: Exact and Approximate Hydrodynamic Manifolds for Kinetic Equations

Authors: A. N. Gorban, I. Karlin

Abstract: The problem of the derivation of hydrodynamics from the Boltzmann equation and related dissipative systems is formulated as the problem of slow invariant manifold in the space of distributions. We review a few instances where such hydrodynamic manifolds were found analytically both as the result of summation of the Chapman--Enskog asymptotic expansion and by the direct solution of the invariance e… ▽ More The problem of the derivation of hydrodynamics from the Boltzmann equation and related dissipative systems is formulated as the problem of slow invariant manifold in the space of distributions. We review a few instances where such hydrodynamic manifolds were found analytically both as the result of summation of the Chapman--Enskog asymptotic expansion and by the direct solution of the invariance equation. These model cases, comprising Grad's moment systems, both linear and nonlinear, are studied in depth in order to gain understanding of what can be expected for the Boltzmann equation. Particularly, the dispersive dominance and saturation of dissipation rate of the exact hydrodynamics in the short-wave limit and the viscosity modification at high divergence of the flow velocity are indicated as severe obstacles to the resolution of Hilbert's 6th Problem. Furthermore, we review the derivation of the approximate hydrodynamic manifold for the Boltzmann equation using Newton's iteration and avoiding smallness parameters, and compare this to the exact solutions. Additionally, we discuss the problem of projection of the Boltzmann equation onto the approximate hydrodynamic invariant manifold using entropy concepts. Finally, a set of hypotheses is put forward where we describe open questions and set a horizon for what can be derived exactly or proven about the hydrodynamic manifolds for the Boltzmann equation in the future. △ Less

Submitted 3 October, 2013; v1 submitted 1 October, 2013; originally announced October 2013.

Comments: 58 pages, 8 Figures (v2: Technical improvement of eps files for better compatibility)

Journal ref: Bull. Amer. Math. Soc., 51(2), 2014, 186-246, Posted online: November 20, 2013

Relativistic Lattice Boltzmann Model with Improved Dissipation

Authors: M. Mendoza, I. Karlin, S. Succi, H. J. Herrmann

Abstract: We develop a relativistic lattice Boltzmann (LB) model, providing a more accurate description of dissipative phenomena in relativistic hydrodynamics than previously available with existing LB schemes. The procedure applies to the ultra-relativistic regime, in which the kinetic energy (temperature) far exceeds the rest mass energy, although the extension to massive particles and/or low temperatures… ▽ More We develop a relativistic lattice Boltzmann (LB) model, providing a more accurate description of dissipative phenomena in relativistic hydrodynamics than previously available with existing LB schemes. The procedure applies to the ultra-relativistic regime, in which the kinetic energy (temperature) far exceeds the rest mass energy, although the extension to massive particles and/or low temperatures is conceptually straightforward. In order to improve the description of dissipative effects, the Maxwell-Juettner distribution is expanded in a basis of orthonormal polynomials, so as to correctly recover the third order moment of the distribution function. In addition, a time dilatation is also applied, in order to preserve the compatibility of the scheme with a cartesian cubic lattice. To the purpose of comparing the present LB model with previous ones, the time transformation is also applied to a lattice model which recovers terms up to second order, namely up to energy-momentum tensor. The approach is validated through quantitative comparison between the second and third order schemes with BAMPS (the solution of the full relativistic Boltzmann equation), for moderately high viscosity and velocities, and also with previous LB models in the literature. Excellent agreement with BAMPS and more accurate results than previous relativistic lattice Boltzmann models are reported. △ Less

Submitted 15 January, 2013; originally announced January 2013.

Comments: 12 pages, 5 figures

Ultrarelativistic Transport Coefficients in Two Dimensions

Authors: M. Mendoza, I. Karlin, S. Succi, H. J. Herrmann

Abstract: We compute the shear and bulk viscosities, as well as the thermal conductivity of an ultrarelativistic fluid obeying the relativistic Boltzmann equation in 2+1 space-time dimensions. The relativistic Boltzmann equation is taken in the single relaxation time approximation, based on two approaches, the first, due to Marle and using the Eckart decomposition, and the second, proposed by Anderson and W… ▽ More We compute the shear and bulk viscosities, as well as the thermal conductivity of an ultrarelativistic fluid obeying the relativistic Boltzmann equation in 2+1 space-time dimensions. The relativistic Boltzmann equation is taken in the single relaxation time approximation, based on two approaches, the first, due to Marle and using the Eckart decomposition, and the second, proposed by Anderson and Witting and using the Landau-Lifshitz decomposition. In both cases, the local equilibrium is given by a Maxwell-Juettner distribution. It is shown that, apart from slightly different numerical prefactors, the two models lead to a different dependence of the transport coefficients on the fluid temperature, quadratic and linear, for the case of Marle and Anderson-Witting, respectively. However, by modifying the Marle model according to the prescriptions given in Ref.[1], it is found that the temperature dependence becomes the same as for the Anderson-Witting model. △ Less

Submitted 15 January, 2013; originally announced January 2013.

Comments: 14 pages, 2 figures

Enhanced lattice Bhatnagar-Gross-Krook method for fluid dynamics simulation

Authors: I. V. Karlin, D. Lycett-Brown, K. H. Luo

Abstract: A generalization of the lattice Bhatnagar-Gross-Krook (LBGK) model for the simulation of hydrodynamics is presented, which takes into account the difference and the frame-independence of the relaxation of non-hydrodynamic modes. The present model retains the computationally efficient standard LBGK form with the generalized equilibrium explicitly derived. The two-dimensional realization on the stan… ▽ More A generalization of the lattice Bhatnagar-Gross-Krook (LBGK) model for the simulation of hydrodynamics is presented, which takes into account the difference and the frame-independence of the relaxation of non-hydrodynamic modes. The present model retains the computationally efficient standard LBGK form with the generalized equilibrium explicitly derived. The two-dimensional realization on the standard lattice is discussed in detail. Performance of the model is assessed through a shear layer simulation and enhanced stability and accuracy with respect to the standard LBGK are reported. The results demonstrate that the present model is a useful upgrade of the standard LBGK without compromising its computational efficiency and accuracy. △ Less

Submitted 17 July, 2011; originally announced July 2011.

Comments: Submitted to Phys. Rev. E, 11-MAR-2011; revised

Comment on the paper Li-Shi Luo, Wei Liao, Xingwang Chen, Yan Peng and Wei Zhang, Numerics of the lattice Boltzmann method: Effects of collision models on the lattice Boltzmann simulations, Physical Review E 83, 056710 (2011)

Authors: I. V. Karlin, S. Succi

Abstract: Critical comments on the entropic lattice Boltzmann equation (ELBE), by Li-Shi Luo, Wei Liao, Xingwang Chen, Yan Peng and Wei Zhang, Physical Review E 83, 056710 (2011), are based on simulations which make use of a model that, despite being called ELBE by the authors, is in fact fully equivalent to the standard lattice Bhatnagar-Gross-Krook equation. As a result, the conclusion of Luo et al on ELB… ▽ More Critical comments on the entropic lattice Boltzmann equation (ELBE), by Li-Shi Luo, Wei Liao, Xingwang Chen, Yan Peng and Wei Zhang, Physical Review E 83, 056710 (2011), are based on simulations which make use of a model that, despite being called ELBE by the authors, is in fact fully equivalent to the standard lattice Bhatnagar-Gross-Krook equation. As a result, the conclusion of Luo et al on ELBE is circular, hence devoid of scientific bearing. △ Less

Submitted 15 July, 2011; originally announced July 2011.

Comments: Comment submitted to Phys. Rev. E

Comment on the paper J. G. Zhou, Rectangular lattice Boltzmann method, Phys. Rev. E 81, 026705 (2010)

Authors: Shyam Chikatamarla, Ilya Karlin

Abstract: It is shown both analytically and numerically that the suggested lattice Boltzmann model on rectangular grids leads to anisotropic dissipation of fluid momentum and thus it does not recover Navier-Stokes equations. Hence, it cannot be used for the simulation of hydrodynamics. It is shown both analytically and numerically that the suggested lattice Boltzmann model on rectangular grids leads to anisotropic dissipation of fluid momentum and thus it does not recover Navier-Stokes equations. Hence, it cannot be used for the simulation of hydrodynamics. △ Less

Submitted 12 December, 2010; originally announced December 2010.

Comments: Accepted for publication in Phys. Rev. E

Adaptive simplification of complex multiscale systems

Authors: Eliodoro Chiavazzo, Ilya Karlin

Abstract: A fully adaptive methodology is developed for reducing the complexity of large dissipative systems. This represents a significant step towards extracting essential physical knowledge from complex systems, by addressing the challenging problem of a minimal number of variables needed to exactly capture the system dynamics. Accurate reduced description is achieved, by construction of a hierarchy of s… ▽ More A fully adaptive methodology is developed for reducing the complexity of large dissipative systems. This represents a significant step towards extracting essential physical knowledge from complex systems, by addressing the challenging problem of a minimal number of variables needed to exactly capture the system dynamics. Accurate reduced description is achieved, by construction of a hierarchy of slow invariant manifolds, with an embarrassingly simple implementation in any dimension. The method is validated with the auto-ignition of the hydrogen-air mixture where a reduction to a cascade of slow invariant manifolds is observed. △ Less

Submitted 24 January, 2011; v1 submitted 7 November, 2010; originally announced November 2010.

Comments: 26 pages, 6 figures, 1 table. Phys Rev E to appear (2011)

Factorization symmetry in lattice Boltzmann simulations

Authors: Ilya Karlin, Shyam Chikatamarla, Pietro Asinari

Abstract: A non-perturbative algebraic theory of lattice Boltzmann method is developed based on a symmetry of a product. It involves three steps: (i) Derivation of admissible lattices in one spatial dimension through a matching condition which imposes restricted extension of higher-order Gaussian moments, (ii) Special quasi-equilibrium distribution function found analytically in closed form on the product… ▽ More A non-perturbative algebraic theory of lattice Boltzmann method is developed based on a symmetry of a product. It involves three steps: (i) Derivation of admissible lattices in one spatial dimension through a matching condition which imposes restricted extension of higher-order Gaussian moments, (ii) Special quasi-equilibrium distribution function found analytically in closed form on the product-lattice in two and three spatial dimensions, and which proves factorization of quasi-equilibrium moments, and (iii) Algebraic method of pruning based on a one-into-one relation between groups of discrete velocities and moments. Two routes of constructing lattice Boltzmann equilibria are distinguished. Present theory includes previously known limiting and special cases of lattices, and enables automated derivation of lattice Boltzmann models from two-dimensional tables, by finding roots of one polynomial and solving a few linear systems. △ Less

Submitted 29 November, 2009; originally announced November 2009.

Comments: Under consideration in Phys Rev E