-
Thermal stability of interfacial mixed layers in c-Ni/a-Zr multilayer during annealing: structural and magnetic properties
Authors:
Debarati Bhattacharya,
Vijay Karki,
Surendra Singh,
T. V. Chandrasekhar Rao
Abstract:
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr multilayers deposited at room temperature were vacuum annealed isochronally at 200degC and 400degC to observe thermal stability of the interfaces constituting the crysta…
▽ More
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr multilayers deposited at room temperature were vacuum annealed isochronally at 200degC and 400degC to observe thermal stability of the interfaces constituting the crystalline/amorphous multilayers. Control over the interfacial behaviour can aid the formation of materials with novel properties. The resultant changes in structural and magnetic properties of the multilayers were investigated in detail through X-ray Reflectivity, Polarized Neutron Reflectivity, SIMS and SQUID-based magnetization measurement techniques. The compositional variations in the amorphous mixed layers formed at the Ni-on-Zr and Zr-on-Ni interfaces due to atomic transport, were carefully observed as a function of annealing. Interface widths proceeded to increase with annealing at the expense of the Ni and Zr layers. The Ni-on-Zr interface was seen to be unstable at both temperatures; but the overall response of the interfaces to atomic diffusion was more pronounced when the multilayers were annealed at 400degC. Under conditions of supersaturation of atoms within restricted spaces of the interfacial layers and the limited availability of components within the multilayer, unexpected demixing effects were observed at both the interfaces. A large increase in magnetic moment obtained after annealing at 400degC, was attributed to the high densification of the Ni layers as well as to the incorporation of Ni crystallites into the Zr-on-Ni interface layers.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Fabrication of p+ contact by thermally induced solid state regrowth of Al on p-type Ge crystal
Authors:
Manoranjan Ghosh,
Shreyas Pitale,
S. G. Singh,
Husain Manasawala,
Vijay Karki,
Manish Singh,
Kulwant Singh,
G. D. Patra,
Shashwati Sen
Abstract:
Formation of p+ contact on Germanium is important for applications in diode detector and other electronic devices. In this work, thermally deposited Al on Ge crystal is annealed at 350oC followed by slow cooling for solid-state regrowth of Al-Ge p+ contact on Ge. Depth profile analysis by secondary ion mass spectrometry (SIMS) is carried out to investigate the occurrence of Al and Ge along the dep…
▽ More
Formation of p+ contact on Germanium is important for applications in diode detector and other electronic devices. In this work, thermally deposited Al on Ge crystal is annealed at 350oC followed by slow cooling for solid-state regrowth of Al-Ge p+ contact on Ge. Depth profile analysis by secondary ion mass spectrometry (SIMS) is carried out to investigate the occurrence of Al and Ge along the depth of the regrown Al-Ge layer. Evidence of regrowth is observed due to inter-diffusion of both Ge and Al across the layers although Ge diffusion in Al layer is found to be more prevalent. Thickness of the evaporated Al layer is varied to understand the diffusion profile of Al, Ge and estimate the depth of Al incorporation in Ge crystal underneath. Hall measurement at different depth of Al-Ge regrown layer reveals that Al impurity induces p+ do** in p-type Ge and its concentration gradually reduces towards the Ge crystal. Top surface of the Al-Ge layer exhibits lowest sheet resistance that varies with the thickness of the as deposited Al layer.
△ Less
Submitted 29 August, 2019; v1 submitted 8 August, 2019;
originally announced August 2019.
-
Annealing driven positive and negative exchange bias in Fe-Cu-Pt heterostructures at room temperature
Authors:
M. A. Basha,
Harsh Bhatt,
Yogesh Kumar,
C. L. Prajapat,
M. Gupta,
V. Karki,
S. Basu,
Surendra Singh
Abstract:
We report annealing induced exchange bias in Fe-Cu-Pt based heterostructures with Cu as an intermediate layer (Fe/Cu/Pt heterostructure) and cap** layer (Fe/Pt/Cu heterostructure). Exchange bias observed at room temperature (300 K) is found to be dependent on the annealing temperature. We obtained positive exchange bias of 120 Oe on annealing both the heterostructures at 400 oC, while on anneali…
▽ More
We report annealing induced exchange bias in Fe-Cu-Pt based heterostructures with Cu as an intermediate layer (Fe/Cu/Pt heterostructure) and cap** layer (Fe/Pt/Cu heterostructure). Exchange bias observed at room temperature (300 K) is found to be dependent on the annealing temperature. We obtained positive exchange bias of 120 Oe on annealing both the heterostructures at 400 oC, while on annealing these heterostructures at 500 and 600 oC a negative exchange bias of ~ -100 Oe was found. X-ray reflectivity and polarized neutron reflectivity measurements provided evolution of depth dependent structure and magnetic properties of the heterostructures on annealing at different temperatures and revealed coexistence of soft and hard (alloy) magnetic phases across the thickness of the films. Rapid and long range interdiffusion at interfaces on annealing the systems at a temperature above 400 oC resulted into formation of a ternary alloy phase. These results can be understood within the context of a very unusual interface exchange interaction at the interface of hard/soft magnetic phases, which are dependent on the annealing temperature.
△ Less
Submitted 25 April, 2019;
originally announced April 2019.
-
Feature Selection based on PCA and PSO for Multimodal Medical Image Fusion using DTCWT
Authors:
Padmavathi K,
Mahima Bhat,
Maya V Karki
Abstract:
Multimodal medical image fusion helps to increase efficiency in medical diagnosis. This paper presents multimodal medical image fusion by selecting relevant features using Principle Component Analysis (PCA) and Particle Swarm Optimization techniques (PSO). DTCWT is used for decomposition of the images into low and high frequency coefficients. Fusion rules such as combination of minimum, maximum an…
▽ More
Multimodal medical image fusion helps to increase efficiency in medical diagnosis. This paper presents multimodal medical image fusion by selecting relevant features using Principle Component Analysis (PCA) and Particle Swarm Optimization techniques (PSO). DTCWT is used for decomposition of the images into low and high frequency coefficients. Fusion rules such as combination of minimum, maximum and simple averaging are applied to approximate and detailed coefficients. The fused image is reconstructed by inverse DTCWT. Performance metrics are evaluated and it shows that DTCWT-PCA performs better than DTCWT-PSO in terms of Structural Similarity Index Measure (SSIM) and Cross Correlation (CC). Computation time and feature vector size is reduced in DTCWT-PCA compared to DTCWT-PSO for feature selection which proves robustness and storage capacity.
△ Less
Submitted 31 January, 2017;
originally announced January 2017.