-
Characterisation of Gamma-irradiated MCz-Silicon Detectors with a High-$K$ Negative Oxide as Field Insulator
Authors:
S. Bharthuar,
M. Bezak,
E. Brücken,
A Gädda,
M. Golovleva,
A. Karadzhinova-Ferrer,
A. Karjalainen,
N. Kramarenko,
S. Kirschenmann,
P. Luukka,
J. Ott,
E. Tuominen,
M. Väänänen
Abstract:
The high-luminosity operation of the Tracker in the Compact Muon Solenid (CMS) detector at the Large Hadron Collider (LHC) experiment calls for the development of silicon-based sensors. This involves implementation of AC-coupling to micro-scale pixel sensor areas to provide enhanced isolation of radiation-induced leakage currents. The motivation of this study is the development of AC-pixel sensors…
▽ More
The high-luminosity operation of the Tracker in the Compact Muon Solenid (CMS) detector at the Large Hadron Collider (LHC) experiment calls for the development of silicon-based sensors. This involves implementation of AC-coupling to micro-scale pixel sensor areas to provide enhanced isolation of radiation-induced leakage currents. The motivation of this study is the development of AC-pixel sensors with negative oxides (such as aluminium oxide - Al$_2$O$_3$ and hafnium oxide - HfO$_2$) as field insulators that possess good dielectric strength and provide radiation hardness. Thin films of Al$_2$O$_3$ and HfO$_2$ grown by atomic layer deposition (ALD) method were used as dielectrics for capacitive coupling. A comparison study based on dielectric material used in MOS capacitors indicate HfO$_2$ as a better candidate since it provides higher sensitivity (where, the term sensitivity is defined as the ratio of the change in flat-band voltage to dose) to negative charge accumulation with gamma irradiation.
Further, space charge sign inversion was observed for sensors processed on high resistivity p-type Magnetic Czochralski silicon (MCz-Si) substrates that were irradiated with gamma rays up to a dose of 1 MGy. The inter-pixel resistance values of heavily gamma irradiated AC-coupled pixel sensors suggest that high-$K$ negative oxides as field insulators provide a good electrical isolation between the pixels.
△ Less
Submitted 19 November, 2022; v1 submitted 16 November, 2022;
originally announced November 2022.
-
Split Ga vacancies and the unusually strong anisotropy of positron annihilation spectra in $\boldsymbolβ$-Ga$_2$O$_3$
Authors:
Antti Karjalainen,
Vera Prozheeva,
Kristoffer Simula,
Ilja Makkonen,
Vincent Callewaert,
Joel B. Varley,
Filip Tuomisto
Abstract:
We report a systematic first principles study on positron annihilation parameters in the $β$-Ga$_2$O$_3$ lattice and Ga mono-vacancy defects complemented with orientation-dependent experiments of the Doppler broadening of the positron-electron annihilation. We find that both the $β$-Ga$_2$O$_3$ lattice and the considered defects exhibit unusually strong anisotropy in their Doppler broadening signa…
▽ More
We report a systematic first principles study on positron annihilation parameters in the $β$-Ga$_2$O$_3$ lattice and Ga mono-vacancy defects complemented with orientation-dependent experiments of the Doppler broadening of the positron-electron annihilation. We find that both the $β$-Ga$_2$O$_3$ lattice and the considered defects exhibit unusually strong anisotropy in their Doppler broadening signals. This anisotropy is associated with low symmetry of the $β$-Ga$_2$O$_3$ crystal structure that leads to unusual kind of one-dimensional confinement of positrons even in the delocalized state in the lattice. In particular, the split Ga vacancies recently observed by scanning transmission electron microscopy produce unusually anisotropic positron annihilation signals. We show that in experiments, the positron annihilation signals in $β$-Ga$_2$O$_3$ samples seem to be often dominated by split Ga vacancies.
△ Less
Submitted 4 November, 2020; v1 submitted 13 May, 2020;
originally announced May 2020.
-
Unlimited Resolution Image Generation with R2D2-GANs
Authors:
Marija Jegorova,
Antti Ilari Karjalainen,
Jose Vazquez,
Timothy M. Hospedales
Abstract:
In this paper we present a novel simulation technique for generating high quality images of any predefined resolution. This method can be used to synthesize sonar scans of size equivalent to those collected during a full-length mission, with across track resolutions of any chosen magnitude. In essence, our model extends Generative Adversarial Networks (GANs) based architecture into a conditional r…
▽ More
In this paper we present a novel simulation technique for generating high quality images of any predefined resolution. This method can be used to synthesize sonar scans of size equivalent to those collected during a full-length mission, with across track resolutions of any chosen magnitude. In essence, our model extends Generative Adversarial Networks (GANs) based architecture into a conditional recursive setting, that facilitates the continuity of the generated images. The data produced is continuous, realistically-looking, and can also be generated at least two times faster than the real speed of acquisition for the sonars with higher resolutions, such as EdgeTech. The seabed topography can be fully controlled by the user. The visual assessment tests demonstrate that humans cannot distinguish the simulated images from real. Moreover, experimental results suggest that in the absence of real data the autonomous recognition systems can benefit greatly from training with the synthetic data, produced by the R2D2-GANs.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Full-Scale Continuous Synthetic Sonar Data Generation with Markov Conditional Generative Adversarial Networks
Authors:
Marija Jegorova,
Antti Ilari Karjalainen,
Jose Vazquez,
Timothy Hospedales
Abstract:
Deployment and operation of autonomous underwater vehicles is expensive and time-consuming. High-quality realistic sonar data simulation could be of benefit to multiple applications, including training of human operators for post-mission analysis, as well as tuning and validation of autonomous target recognition (ATR) systems for underwater vehicles. Producing realistic synthetic sonar imagery is…
▽ More
Deployment and operation of autonomous underwater vehicles is expensive and time-consuming. High-quality realistic sonar data simulation could be of benefit to multiple applications, including training of human operators for post-mission analysis, as well as tuning and validation of autonomous target recognition (ATR) systems for underwater vehicles. Producing realistic synthetic sonar imagery is a challenging problem as the model has to account for specific artefacts of real acoustic sensors, vehicle altitude, and a variety of environmental factors. We propose a novel method for generating realistic-looking sonar side-scans of full-length missions, called Markov Conditional pix2pix (MC-pix2pix). Quantitative assessment results confirm that the quality of the produced data is almost indistinguishable from real. Furthermore, we show that bootstrap** ATR systems with MC-pix2pix data can improve the performance. Synthetic data is generated 18 times faster than real acquisition speed, with full user control over the topography of the generated data.
△ Less
Submitted 18 February, 2020; v1 submitted 15 October, 2019;
originally announced October 2019.
-
Continuous and Resource Managed Regression Testing: An Industrial Use Case
Authors:
Tri Quach,
Tommi Oinonen,
Antti Karjalainen
Abstract:
Regression testing is an important part of quality control in both software and embedded products, where hardware is involved. It is also one of the most expensive and time consuming part of the product cycle. To improve the cost effectiveness of the development cycle and the regression testing, we use test case prioritisation and selection techniques to run more important test cases earlier in th…
▽ More
Regression testing is an important part of quality control in both software and embedded products, where hardware is involved. It is also one of the most expensive and time consuming part of the product cycle. To improve the cost effectiveness of the development cycle and the regression testing, we use test case prioritisation and selection techniques to run more important test cases earlier in the testing process.
In this paper, we consider a functional test case prioritisation with an access only to the version control of the codebase and regression history. Prioritisation is used to aid our test case selection, where we have chosen 5-25 (0.4%-2.0% of 1254) test cases to validate our method. The selection technique together with other prioritisation methods allows us to shape the current static, retest-all regression testing into a more resource managed regression testing framework. This framework will serve the agile way of working better and will allow us to allocate testing resources more wisely. This is a joint work with a large international Finnish company in an embedded industrial domain.
△ Less
Submitted 23 October, 2019; v1 submitted 6 May, 2019;
originally announced May 2019.
