-
Training performance of Nb3Sn Rutherford cables in a channel with a wide range of impregnation materials
Authors:
S. Otten,
A. Kario,
W. A. J. Wessel. J. Leferink,
H. H. J. ten Kate,
M. Daly,
C. Hug,
S. Sidorov,
A. Brem,
B. Auchmann,
P. Studer,
T. Tervoort
Abstract:
Training of accelerator magnets is a costly and time consuming process. The number of training quenches must therefore be reduced to a minimum. We investigate training of impregnated Nb3Sn Rutherford cable in a small-scale experiment. The test involves a Rutherford cable impregnated in a meandering channel simulating the environment of a canted-cosine-theta (CCT) coil. The sample is powered using…
▽ More
Training of accelerator magnets is a costly and time consuming process. The number of training quenches must therefore be reduced to a minimum. We investigate training of impregnated Nb3Sn Rutherford cable in a small-scale experiment. The test involves a Rutherford cable impregnated in a meandering channel simulating the environment of a canted-cosine-theta (CCT) coil. The sample is powered using a transformer and the Lorentz force is generated by an externally applied magnetic field. The low material and helium consumption enable the test of a larger number of samples. In this article, we present training of samples impregnated with alumina-filled epoxy resins, a modified resin with paraffin-like mechanical properties, and a new tough resin in development at ETH Zürich. These new data are compared with previous results published earlier. Compared to samples with unfilled epoxy resin, those with alumina-filled epoxy show favorable training properties with higher initial quench currents and fewer training quenches before reaching 80% of the critical current.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider
Authors:
L. Bottura,
D. Aguglia,
B. Auchmann,
T. Arndt,
J. Beard,
A. Bersani,
F. Boattini,
M. Breschi,
B. Caiffi,
X. Chaud,
M. Dam,
F. Debray,
H. De Gersem,
E. De Matteis,
A. Dudarev,
S. Farinon,
A. Kario,
R. Losito,
S. Mariotto,
M. Mentink,
R. Musenich,
T. Ogitsu,
M. Prioli,
L. Quettier,
L. Rossi
, et al. (8 additional authors not shown)
Abstract:
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish…
▽ More
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions.
△ Less
Submitted 29 March, 2022; v1 submitted 26 March, 2022;
originally announced March 2022.
-
Improved training in paraffin-wax impregnated Nb3Sn Rutherford cables demonstrated in BOX samples
Authors:
Michael Daly,
Bernard Auchmann,
André Brem,
Christoph Hug,
Serguei Sidorov,
Simon Otten,
Marc Dhallé,
Zichuan Guo,
Anna Kario,
Herman ten Kate
Abstract:
Resin-impregnated high-field Nb3Sn type of accelerator magnets are known to require extensive training campaigns and even may exhibit performance-limiting defects after thermal or electromagnetic cycling. In order to efficiently explore technological solutions for this behaviour and assess a wide variety of impregnation material combinations and surface treatments, the BOnding eXperiment (BOX) sam…
▽ More
Resin-impregnated high-field Nb3Sn type of accelerator magnets are known to require extensive training campaigns and even may exhibit performance-limiting defects after thermal or electromagnetic cycling. In order to efficiently explore technological solutions for this behaviour and assess a wide variety of impregnation material combinations and surface treatments, the BOnding eXperiment (BOX) sample was developed. BOX provides a short-sample test platform featuring magnet-relevant Lorentz forces and exhibits associated training. Here we report on the comparative behaviour of BOX samples comprising the same Nb3Sn Rutherford cable but impregnated either with common resins used in high-field magnets, or with less conventional paraffin wax. Remarkably, the two paraffin wax-impregnated BOX samples reached their critical current without training and are also resilient to thermal and mechanical cycling. These rather encouraging results strongly contrast to those obtained with resin impregnated samples, which show the characteristic extensive training and at best barely reach their critical current value.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Interfilament Resistance at 77 K in Striated HTS Coated Conductors
Authors:
R. Gyuráki,
A. Godfrin,
A. Jung,
A. Kario,
R. Nast,
E. Demenčik,
W. Goldacker,
F. Grilli
Abstract:
Striating HTS coated conductor (CC) tapes into narrow filaments offers the possibility of reducing the tapes' magnetization losses without unreasonably decreasing their current-carrying capability. However, realizing well-separated striations presents technological challenges, especially if the number of filaments is large and/or if a thick layer of metallic stabilizer is present. In these situati…
▽ More
Striating HTS coated conductor (CC) tapes into narrow filaments offers the possibility of reducing the tapes' magnetization losses without unreasonably decreasing their current-carrying capability. However, realizing well-separated striations presents technological challenges, especially if the number of filaments is large and/or if a thick layer of metallic stabilizer is present. In these situations, the filaments can be easily coupled and their effectiveness to reduce magnetization losses is strongly diminished or eliminated. While the onset of coupling is well visible from magnetization loss measurements, the actual path of the coupling current is unknown. In this contribution we present a systematic study of the transverse resistance in HTS CC samples in order to get a deeper understanding of those paths. The measured samples differ in terms of manufacturer (SuperPower and SuperOx), and presence and thickness of stabilizer material. In addition, oxidation is used as a means to increase the resistance between the filaments in non-stabilized samples. The results are interpreted with a chain network model. This work provides useful insights on the factors determining the transverse resistance in striated HTS CCs, thus indicating ways to improve the effectiveness of the striation process for AC loss reduction.
△ Less
Submitted 16 January, 2017; v1 submitted 2 May, 2016;
originally announced May 2016.
-
Estimation of Self-Field Critical Current and Transport-Magnetization AC Losses of Roebel Cables
Authors:
Francesco Grilli,
Michal Vojenciak,
Anna Kario,
Victor Zermeno
Abstract:
Roebel cables made of HTS coated conductors are regarded as promising cables for winding applications in virtue of their large engineering current density and low losses. The composing meander-shaped strands are assembled very tightly into the cable, which results in a strong electromagnetic interaction between them. This interaction profoundly influences the effective self-field critical current…
▽ More
Roebel cables made of HTS coated conductors are regarded as promising cables for winding applications in virtue of their large engineering current density and low losses. The composing meander-shaped strands are assembled very tightly into the cable, which results in a strong electromagnetic interaction between them. This interaction profoundly influences the effective self-field critical current ($I_c$) of the cable, which is much lower than the sum of the $I_c$s of the composing strands. Also the AC losses are influenced by the material's properties and by the geometrical configuration of the cable. Being able to predict the effective critical current and AC losses of such cables is very important for a proper design of applications: due to the complexity of the cable's geometry and of the material's properties, this prediction can only be performed with advanced numerical tools.
In this contribution we use finite-element-based models to compute the effective $I_c$ and the AC losses of Roebel cables composed of 31 strands using tapes from two manufacturers. The AC losses are analyzed in the simultaneous presence of transport current and background perpendicular field proportional to the current, which mirrors the situation occurring in a winding. Our models include the angular dependence of $J_c(B,θ)$ at~77 K, which is very different for the two materials.
By means of a successful comparison of the simulation results to experimental data obtained with a calorimetric method measuring the evaporation of liquid nitrogen, this work confirms the applicability and efficiency of our numerical techniques for simulating the electromagnetic behavior of Roebel cables and devices thereof.
△ Less
Submitted 21 October, 2015;
originally announced October 2015.
-
A self-consistent model for estimating the critical current of superconducting devices
Authors:
Victor M. R. Zermeño,
Frederic Sirois,
Makoto Takayasu,
Michal Vojenčiak,
Anna Kario,
Francesco Grilli
Abstract:
Nowadays, there is growing interest in using superconducting wires or tapes for the design and manufacture of devices such as cables, coils, rotating machinery, transformers and fault current limiters among others. Their high current capacity has made them the candidates of choice for manufacturing compact and light cables and coils that can be used in the large scale power applications described…
▽ More
Nowadays, there is growing interest in using superconducting wires or tapes for the design and manufacture of devices such as cables, coils, rotating machinery, transformers and fault current limiters among others. Their high current capacity has made them the candidates of choice for manufacturing compact and light cables and coils that can be used in the large scale power applications described above. However, the performance of these cables and coils is limited by their critical current, which is determined by several factors, including the conductor's material properties and the geometric layout of the device itself. In this work we present a self-consistent model for estimating the critical current of superconducting devices. This is of large importance when the operating conditions are such that the self-field produced by the current is comparable to the overall background field. The model is based on the asymptotic limit when time approaches infinity of Faraday's equation written in terms of the magnetic vector potential. It uses a continuous E-J relationship and takes the angular dependence of the critical current density on the magnetic flux density into account. The proposed model is used to estimate the critical current of superconducting devices such as cables, coils, and coils made of transposed cables with very high accuracy. The high computing speed of this model makes it an ideal candidate for design optimization.
△ Less
Submitted 22 December, 2014;
originally announced December 2014.
-
DC and AC Characterization of Pancake Coils Made from Roebel-Assembled Coated Conductor Cable
Authors:
Anna Kario,
Michal Vojenčiak,
Francesco Grilli,
Andrea Kling,
Alexandra Jung,
Jörg Brand,
Andrej Kudymow,
Johann Willms,
Uwe Walschburger,
Victor Zermeno,
Wilfried Goldacker
Abstract:
Roebel cables made of HTS coated conductors can carry high currents with a compact design and reduced AC losses. They are therefore good candidates for manufacturing coils for HTS applications such as motors and generators. In this paper we present the experimental DC and AC characterization of several coils assembled from a 5 meter long Roebel cable built at KIT, which differ in the number of tur…
▽ More
Roebel cables made of HTS coated conductors can carry high currents with a compact design and reduced AC losses. They are therefore good candidates for manufacturing coils for HTS applications such as motors and generators. In this paper we present the experimental DC and AC characterization of several coils assembled from a 5 meter long Roebel cable built at KIT, which differ in the number of turns and turn-to-turn spacing. Our experiments, supported by finite-element method (FEM) calculations, show that a more tightly wound Roebel coil, despite having a lower critical (and therefore operating) current, can produce a higher magnetic field than a loosely wound one. For a given magnetic field produced at the coil's center, all the coils have similar AC losses, with the exception of the most loosely wound one, which has much higher losses due to the relatively large current needed to produce the desired field. The experiments presented in this paper are carried out on the geometry of pancake coils made of Roebel cables, but they are exemplary of a more general strategy that, coupling experiments and numerical simulations, can be used to optimize the coil design with respect to different parameters, such as tape quantity, size, or AC loss, the relative importance of which is dictated by the specific application.
△ Less
Submitted 29 May, 2017; v1 submitted 4 August, 2014;
originally announced August 2014.
-
AC loss and coupling currents in YBCO coated conductors with varying number of filaments
Authors:
Eduard Demencik,
Michal Vojenciak,
Anna Kario,
Rainer Nast,
Alexandra Jung,
Wilfried Goldacker,
Francesco Grilli
Abstract:
Striation of HTS coated conductors (CCs) as a way to reduce their magnetization AC losses has been the subject of intense research in the past years by several groups. While the principle of this approach is well understood, its practical application on commercial material to be used in power application is still far to be implemented due to manufacturing and technological constraints. Recent adva…
▽ More
Striation of HTS coated conductors (CCs) as a way to reduce their magnetization AC losses has been the subject of intense research in the past years by several groups. While the principle of this approach is well understood, its practical application on commercial material to be used in power application is still far to be implemented due to manufacturing and technological constraints. Recent advances in tape quality and striation technology are now enabling systematic investigations of the influence of the number of filaments on AC loss reduction with a consistency that was not available in the past. In this work we demonstrate the technological feasibility of reducing the magnetization losses of commercially available CC by striating them into a high number of filaments (up to 120). The loss reduction exceeds one order of magnitude and does not come at the expense of current-carrying capability: samples with 10 and 20 filaments are unaffected by the striation process, while samples with 80 and 120 filaments still retain 80 and 70% of the current-carrying potential, respectively. We also investigate the transverse resistivity in order to understand the paths followed by the coupling currents: we found that the coupling current prevalently flows in the metallic substrate, rather than in and out of the filaments. Finally, we use oxidation as a method to reduce the coupling currents and losses. The contribution of this work is three-fold: 1) It describes the know-how to produce a large number of high quality striations in commercially available CCs, greatly reducing their losses without extensively degrading their transport properties; 2) It provides a comprehensive characterization of said samples (e.g. measurements in a wide frequency range, transverse resistance profiles, influence of oxidation on DC and AC behavior); 3) It provides new insight on the patterns of the coupling currents.
△ Less
Submitted 29 May, 2017; v1 submitted 19 June, 2014;
originally announced June 2014.
-
Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future
Authors:
Wilfried Goldacker,
Francesco Grilli,
Enric Pardo,
Anna Kario,
Sonja I. Schlachter,
Michal Vojenciak
Abstract:
Energy applications employing high-temperature superconductors (HTS), such as motors/generators, transformers, transmission lines and fault current limiters, are usually operated in the alternate current (AC) regime. In order to be efficient, the HTS devices need to have a sufficiently low value of AC loss, in addition to the necessary current-carrying capacity. Most applications are operated with…
▽ More
Energy applications employing high-temperature superconductors (HTS), such as motors/generators, transformers, transmission lines and fault current limiters, are usually operated in the alternate current (AC) regime. In order to be efficient, the HTS devices need to have a sufficiently low value of AC loss, in addition to the necessary current-carrying capacity. Most applications are operated with currents beyond the current capacity of single conductors and consequently require cabled conductor solutions with much higher current carrying capacity, from a few kA to up to 20-30 kA for large hydro-generators. A century ago, in 1914, Ludwig Roebel invented a low-loss cable design for copper cables, which was successively named after him. The main idea behind Roebel cables is to separate the current in different strands and to provide a full transposition of the strands along the cable direction. Nowadays, these cables are commonly used in the stator of large generators. Based on the same design concept of their conventional material counterparts, HTS Roebel cables from REBCO coated conductors were first manufactured at the Karlsruhe Institute of Technology (KIT) and have been successively developed in a number of varieties that provide all the required technical features such as fully transposed strands, high transport currents and low AC losses, yet retaining enough flexibility for a specific cable design. In the past few years a large number of scientific papers have been published on the concept, manufacturing and characterization of such cables. Times are therefore mature for a review of those results. The goal is to provide an overview and a succinct and easy-to-consult guide for users, developers, and manufacturers of this kind of HTS cables.
△ Less
Submitted 29 May, 2017; v1 submitted 17 June, 2014;
originally announced June 2014.
-
Self-field Effects and AC Losses in Pancake Coils Assembled from Coated Conductor Roebel Cables
Authors:
Francesco Grilli,
Victor M. R. Zermeno,
Enric Pardo,
Michal Vojenciak,
Joerg Brand,
Anna Kario,
Wilfried Goldacker
Abstract:
In this contribution we develop a refined numerical model of pancake coils assembled from a coated conductor Roebel cable, which includes the angular dependence of the critical current density $J_c$ on the magnetic field and the actual (three-dimensional) shape of the current lead used to inject the current. Previous works of ours indicate that this latter has an important influence on the measure…
▽ More
In this contribution we develop a refined numerical model of pancake coils assembled from a coated conductor Roebel cable, which includes the angular dependence of the critical current density $J_c$ on the magnetic field and the actual (three-dimensional) shape of the current lead used to inject the current. Previous works of ours indicate that this latter has an important influence on the measured value of the AC losses. For the simulation of the superconductor, we used two alternative models based on different descriptions of the superconductor's properties and implemented in different mathematical schemes. For the simulation of the current lead we use a full three-dimensional finite-element model. The results of the simulation are compared with measurements and the main issues related to the modeling and the measurement of Roebel coils are discussed in detail.
△ Less
Submitted 4 November, 2014; v1 submitted 13 September, 2013;
originally announced September 2013.