Showing 1–17 of 17 results for author: Kariminezhad, A

Robust Transceiver Design for IRS-Assisted Cascaded MIMO Systems

Authors: Hosesin Esmaeili, Ali Kariminezhad, Aydin Sezgin

Abstract: {Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. We consider a MIMO multi-hop system, where the source, the relay, and the destination are equipped with multiple antennas. Further, an intelligent reconfigurable surface (IRS) is established to cancel the RSI as much as possible. The considered decode-and-forward (DF) hybrid re… ▽ More {Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. We consider a MIMO multi-hop system, where the source, the relay, and the destination are equipped with multiple antennas. Further, an intelligent reconfigurable surface (IRS) is established to cancel the RSI as much as possible. The considered decode-and-forward (DF) hybrid relay can operate in either half-duplex or full-duplex mode, and the mode changes adaptively depending on the RSI strength. We investigate a robust transceiver design problem, which maximizes the throughput rate corresponding to the worst-case RSI under a self-interference channel uncertainty bound constraint. To the best of our knowledge, this is the first work that uses the IRS for RSI cancellation in MIMO full-duplex DF relay systems. The yielded problem turns out to be a non-convex optimization problem, where the non-convex objective is optimized over the cone of semidefinite matrices. We propose a closed-from lower bound for the IRS worst case RSI cancellation. Eventually, we show an important result that, for the worst case scenario, IRS can be helpful only if the number of IRS elements are at least as large as the size of the interference channel. Moreover, a novel method based on majorization theory is proposed to find the best response of the transmitters and relay against worst case RSI. Furthermore, we propose a multi-level water-filling algorithm to obtain a locally optimal solution iteratively. Finally, we obtain insights on the optimal antenna allocation at the relay input-frontend and output-frontend, for relay reception and transmission, respectively. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:1912.12831

Robust Environment Perception for Automated Driving: A Unified Learning Pipeline for Visual-Infrared Object Detection

Authors: Mohsen Vadidar, Ali Kariminezhad, Christian Mayr, Laurent Kloeker, Lutz Eckstein

Abstract: The RGB complementary metal-oxidesemiconductor (CMOS) sensor works within the visible light spectrum. Therefore it is very sensitive to environmental light conditions. On the contrary, a long-wave infrared (LWIR) sensor operating in 8-14 micro meter spectral band, functions independent of visible light. In this paper, we exploit both visual and thermal perception units for robust object detectio… ▽ More The RGB complementary metal-oxidesemiconductor (CMOS) sensor works within the visible light spectrum. Therefore it is very sensitive to environmental light conditions. On the contrary, a long-wave infrared (LWIR) sensor operating in 8-14 micro meter spectral band, functions independent of visible light. In this paper, we exploit both visual and thermal perception units for robust object detection purposes. After delicate synchronization and (cross-) labeling of the FLIR [1] dataset, this multi-modal perception data passes through a convolutional neural network (CNN) to detect three critical objects on the road, namely pedestrians, bicycles, and cars. After evaluation of RGB and infrared (thermal and infrared are often used interchangeably) sensors separately, various network structures are compared to fuse the data at the feature level effectively. Our RGB-thermal (RGBT) fusion network, which takes advantage of a novel entropy-block attention module (EBAM), outperforms the state-of-the-art network [2] by 10% with 82.9% mAP. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Raw Radar data based Object Detection and Heading estimation using Cross Attention

Authors: Ravi Kothari, Ali Kariminezhad, Christian Mayr, Haoming Zhang

Abstract: Radar is an inevitable part of the perception sensor set for autonomous driving functions. It plays a gap-filling role to complement the shortcomings of other sensors in diverse scenarios and weather conditions. In this paper, we propose a Deep Neural Network (DNN) based end-to-end object detection and heading estimation framework using raw radar data. To this end, we approach the problem in both… ▽ More Radar is an inevitable part of the perception sensor set for autonomous driving functions. It plays a gap-filling role to complement the shortcomings of other sensors in diverse scenarios and weather conditions. In this paper, we propose a Deep Neural Network (DNN) based end-to-end object detection and heading estimation framework using raw radar data. To this end, we approach the problem in both a Data-centric and model-centric manner. We refine the publicly available CARRADA dataset and introduce Bivariate norm annotations. Besides, the baseline model is improved by a transformer inspired cross-attention fusion and further center-offset maps are added to reduce localisation error. Our proposed model improves the detection mean Average Precision (mAP) by 5%, while reducing the model complexity by almost 23%. For comprehensive scene understanding purposes, we extend our model for heading estimation. The improved ground truth and proposed model is available at Github △ Less

Submitted 17 February, 2023; v1 submitted 17 May, 2022; originally announced May 2022.

Contact-less Material Probing with Distributed Sensors: Joint Sensing and Communication Optimization

Authors: Ali Kariminezhad, Soheil Gherekhloo, Aydin Sezgin

Abstract: The utilization of RF signals to probe material properties of objects is of huge interest both in academia as well as industry. To this end, a setup is investigated, in which a transmitter equipped with a two-dimensional multi-antenna array dispatches a signal, which hits objects in the environment and the reflections from the objects are captured by distributed sensors. The received signal at tho… ▽ More The utilization of RF signals to probe material properties of objects is of huge interest both in academia as well as industry. To this end, a setup is investigated, in which a transmitter equipped with a two-dimensional multi-antenna array dispatches a signal, which hits objects in the environment and the reflections from the objects are captured by distributed sensors. The received signal at those sensors are then amplified and forwarded to a multiple antenna fusion center, which performs space-time post-processing in order to optimize the information extraction. In this process, optimal design of power allocation per object alongside sensors amplifications is of crucial importance. Here, the power allocation and sensors amplifications is jointly optimized, given maximum-ratio combining (MRC) at the fusion center. We formulate this challenge as a sum-power minimization under per-object SINR constraints, a sum-power constraint at the transmitter and individual power constraints at the sensors. Moreover, the advantage of deploying zero-forcing (ZF) and minimum mean-squared error (MMSE) at the fusion center is discussed. Asymptotic analysis is also provided for the case that large number of sensors are deployed in the sensing environment. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Comments: arXiv admin note: text overlap with arXiv:1902.11117

Defect Detection by MIMO Wireless Sensing based on Weighted Low-Rank plus Sparse Recovery

Authors: Udaya S. K. P. Miriya Thanthrige, Ali Kariminezhad, Peter Jung, Aydin Sezgin

Abstract: We present a compressive sensing based defect detection by multiple input multiple output (MIMO) wireless radar. Here, defects are inside a layered material structure, therefore, due to reflections from the surface of the layered material structure the defect detection is challenging. By utilizing a low-rank nature of the reflections of the layered material structure and sparse nature of the defec… ▽ More We present a compressive sensing based defect detection by multiple input multiple output (MIMO) wireless radar. Here, defects are inside a layered material structure, therefore, due to reflections from the surface of the layered material structure the defect detection is challenging. By utilizing a low-rank nature of the reflections of the layered material structure and sparse nature of the defects, we propose a method based on rank minimization and sparse recovery. To improve the accuracy in the recovery of low-rank and sparse components, we propose a non-convex approach based on the iteratively reweighted nuclear norm and iteratively reweighted $\ell_1-$norm algorithm. Our numerical results show that the proposed method is able to demix and recover the signalling responses of the defects and layered structure successfully from substantially reduced number of observations. Further, the proposed approach outperforms the state-of-the-art clutter reduction approaches △ Less

Submitted 19 February, 2022; v1 submitted 31 October, 2020; originally announced November 2020.

Comments: Submitted to IEEE EUSIPCO 2022

Robust Transceiver Design for Full-Duplex Decode-and-Forward Relay-Assisted MIMO Systems

Authors: Hossein Esmaeili, Ali Kariminezhad, Aydin Sezgin

Abstract: Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since some residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and t… ▽ More Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since some residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and the destination are equipped with multiple antennas. The considered decode-and-forward (DF) hybrid relay can operate in either half-duplex or full-duplex mode, and the mode changes adaptively depending on the RSI strength. We investigate a robust transceiver design problem, which maximizes the throughput rate of the worstcase RSI under the self-interference channel uncertainty bound constraint. The yielded problem turns out to be a non-convex optimization problem, where the non-convex objective is optimized over the cone of semidefinite matrices. Without loss of generality, we simplify the problem to the optimization over multiple scalar parameters using majorization theory. Furthermore, we propose an efficient algorithm to obtain a local optimal solution iteratively. Eventually, we obtain insights on the optimal antenna allocation at the relay input-frontend and output-frontend, for relay reception and transmission, respectively. Interestingly, given a number of antennas at the relay, the robustness improves if more antennas are allocated to reception than to transmission. △ Less

Submitted 30 December, 2019; originally announced December 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1901.08782

Spatio-Temporal Waveform Design in Active Sensing Systems with Multilayer Targets

Authors: Ali Kariminezhad, Aydin Sezgin

Abstract: In this paper, we study the optimal spatio-temporal waveform design for active sensing applications. For this purpose a multi-antenna radar is exploited. The targets in the radar vision are naturally composed of multiple layers of different materials. Therefore, the interaction of these layers with the incident wave effects targets detection and classification. In order to enhance the quality of d… ▽ More In this paper, we study the optimal spatio-temporal waveform design for active sensing applications. For this purpose a multi-antenna radar is exploited. The targets in the radar vision are naturally composed of multiple layers of different materials. Therefore, the interaction of these layers with the incident wave effects targets detection and classification. In order to enhance the quality of detection, we propose to exploit space-time waveforms which adapt with the targets multilayer response. We consider the backscattered signal power as the utility function to be maximized. The backscattered signal power maximization under transmit signal power constraint is formulated as a semidefinite program (SDP). First, we assume a single-target scenario, where the resulting SDP yields an analytical solution. Second, we study the optimal waveform which considers the angle uncertainties of a target in the presence of a clutter. Third, having multiple targets and multiple clutters, the weighted sum of the backscattered signals power from the targets is maximized to deliver the backscattered power region outermost boundary. We observe that, when the targets material is given, the backscattered signal power can be significantly increased by optimal spatio-temporal waveform design. Moreover, we observe that by utilizing multiple temporal dimensions in the waveform design process, the number of exploited antennas can be significantly decreased. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Optimal Resource Allocation for Joint Sensing and Communication: Multiple Targets and Clutters

Authors: Ali Kariminezhad, Soheil Gherekhloo, Aydin Sezgin

Abstract: We study a contactless target probing based on stimulation by a radio frequency (RF) signal. The transmit signal is dispatched from a transmitter equipped with a two-dimensional antenna array. Then, the reflected signal from the targets are received at multiple distributed sensors. The observation at the sensors are amplified and forwarded to the fusion center. Afterwards, the fusion center perfor… ▽ More We study a contactless target probing based on stimulation by a radio frequency (RF) signal. The transmit signal is dispatched from a transmitter equipped with a two-dimensional antenna array. Then, the reflected signal from the targets are received at multiple distributed sensors. The observation at the sensors are amplified and forwarded to the fusion center. Afterwards, the fusion center performs space-time post processing to extract the maximum common information between the received signal and the targets impulse responses. Optimal power allocation at the transmitter and amplification at the sensors is investigated. The sum-power minimization problem turns out to be a non-convex problem. We propose an efficient algorithm to solve this problem iteratively. By exploiting maximum-ratio transmission (MRT), maximum-ratio combining (MRC) of space-time received signal vector is the optimal receiver at sufficiently low signal-to-interference-plus-noise-ratio (SINR). However, zero-forcing (ZF) at the fusion center outperforms MRC at higher SINR demands. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Hybrid Beamforming: Where Should the Analog Power Amplifiers be Placed?

Authors: Yasemin Karacora, Ali Kariminezhad, Aydin Sezgin

Abstract: In this paper we study the spectral efficiency (SE) of a point-to-point massive multiple-input multiple-output system (P2P-massive MIMO) with limited radio frequency (RF) chains, i.e., analog-to-digital/ digital-to-analog (D2A/A2D) modules, at the transceivers. The resulting architecture is known as hybrid beamforming, where the joint analog and digital beamforming optimization maximizes the SE. W… ▽ More In this paper we study the spectral efficiency (SE) of a point-to-point massive multiple-input multiple-output system (P2P-massive MIMO) with limited radio frequency (RF) chains, i.e., analog-to-digital/ digital-to-analog (D2A/A2D) modules, at the transceivers. The resulting architecture is known as hybrid beamforming, where the joint analog and digital beamforming optimization maximizes the SE. We analyze the SE of the system by kee** the number of RF-chains low, but placing analog amplifiers at different paths. Conventional hybrid beamforming architecture uses the amplifiers right after the D2A modules. However, placing them at the phase shifters or at the antennas can effect the SE of hybrid beamforming. We study the optimal placement of the analog amplifiers and pinpoint the amount of loss in case of misplaced amplifiers. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: 5 pages, 2 figures, accepted for presentation at ICASSP 2019

Robust Transceiver Design for MIMO Decode-and-Forward Full-Duplex Relay

Authors: Ali Kariminezhad, Aydin Sezgin

Abstract: Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since the residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and th… ▽ More Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since the residual self-interference (RSI) remains uncanceled due to imperfect channel knowledge. We consider a MIMO multi-hop system, where the source, the relay and the destination are equipped with multiple antennas. We allow multi-stream beamforming granted by MIMO technique, without restricting the transmissions to single streaming. The relay can operate in either half-duplex or full-duplex mode, and it changes the mode depending on the RSI strength. Furthermore, the relay is assumed to perform a decode-and-forward (DF) strategy. We investigate a robust transceiver design problem, which maximizes the throughput rate of the worst-case RSI under RSI channel uncertainty bound constraint. The problem turns out to be a non-convex optimization problem. We propose an efficient algorithm to obtain a local optimal solution iteratively. Eventually, we obtain insights on the optimal antenna allocation at the relay input-frontend and output-frontend, for relay reception and transmission, respectively. Interestingly, with less number of antennas at the source than that at the destination, more number of antennas should be used at the relay input-frontend than the relay output-frontend. △ Less

Submitted 25 January, 2019; originally announced January 2019.

Base-Stations Up in the Air: Multi-UAV Trajectory Control for Min-Rate Maximization in Uplink C-RAN

Authors: Stefan Roth, Ali Kariminezhad, Aydin Sezgin

Abstract: In this paper we study the impact of unmanned aerial vehicles (UAVs) trajectories on terrestrial users' spectral efficiency (SE). Assuming a strong line of sight path to the users, the distance from all users to all UAVs influence the outcome of an online trajectory optimization. The trajectory should be designed in a way that the fairness rate is maximized over time. That means, the UAVs travel i… ▽ More In this paper we study the impact of unmanned aerial vehicles (UAVs) trajectories on terrestrial users' spectral efficiency (SE). Assuming a strong line of sight path to the users, the distance from all users to all UAVs influence the outcome of an online trajectory optimization. The trajectory should be designed in a way that the fairness rate is maximized over time. That means, the UAVs travel in the directions that maximize the minimum of the users' SE. From the free-space path-loss channel model, a data-rate gradient is calculated and used to direct the UAVs in a long-term perspective towards the local optimal solution on the two-dimensional spatial grid. Therefore, a control system implementation is designed. Thereby, the UAVs follow the data-rate gradient direction while having a more smooth trajectory compared with a gradient method. The system can react to changes of the user locations online; this system design captures the interaction between multiple UAV trajectories by joint processing at the central unit, e.g., a ground base station. Because of the wide spread of user locations, the UAVs end up in optimal locations widely apart from each other. Besides, the SE expectancy is enhancing continuously while moving along this trajectory. △ Less

Submitted 26 November, 2018; originally announced November 2018.

On The Efficiency of Widely Linear Precoding and Symbol Extension in Cellular Uplink

Authors: Ali Kariminezhad, Stefan Roth, Aydin Sezgin, Anas Chaaban

Abstract: We investigate Gaussian widely linear precoding known as improper Gaussian signaling for the cellular uplink with inter-cell interference, known as interference multiple access channel (IMAC). This transmission scheme provides extra degrees of freedom by treating the real and imaginary components of the complex Gaussian signal differently. Since current standards mainly utilize linear beamforming… ▽ More We investigate Gaussian widely linear precoding known as improper Gaussian signaling for the cellular uplink with inter-cell interference, known as interference multiple access channel (IMAC). This transmission scheme provides extra degrees of freedom by treating the real and imaginary components of the complex Gaussian signal differently. Since current standards mainly utilize linear beamforming for waveform generation, we highlight the benefits of widely linear beamforming over multiple temporal dimensions (symbol extension in time) in the IMAC. This scheme achieves significantly higher information rates compared to conventional proper Gaussian signaling at the expense of extra complexity at the transmission phase. We study the sum-power minimization problem under rate constraints. This problem is a difference of concave functions (DC) program, hence, a non-convex problem. By numerical simulations, we observe the benefits of improper Gaussian signaling alongside symbol extension in power consumption for both single-antenna and multi-antenna base stations. Interestingly, we observe that at strong interference scenarios, the efficiency of improper Gaussian signaling outperforms conventional proper Gaussian signaling at low rate demands. Moreover, in such scenarios the sum-power required for achieving particular rate demands is significantly reduced. △ Less

Submitted 30 May, 2018; v1 submitted 12 April, 2018; originally announced April 2018.

Towards Optimal Energy Harvesting Receiver Design in MIMO Systems

Authors: Ali Kariminezhad, Aydin Sezgin

Abstract: In this paper, we investigate a multiple-input multiple-output (MIMO) system with simultaneous information detection (ID) and energy harvesting (EH) receiver. This point-to-point system operates in the vicinity of active interfering nodes. The receiver performs power splitting where a portion of received signal undergoes analog energy harvesting circuitry. Further, the information content of the o… ▽ More In this paper, we investigate a multiple-input multiple-output (MIMO) system with simultaneous information detection (ID) and energy harvesting (EH) receiver. This point-to-point system operates in the vicinity of active interfering nodes. The receiver performs power splitting where a portion of received signal undergoes analog energy harvesting circuitry. Further, the information content of the other portion is extracted after performing digital beamforming. In this MIMO system, information carrier eigen-modes are not necessarily the eigen-modes with the strongest energy level. Hence, it is beneficial to perform independent beamforming at the receiver of MIMO-P2P channel. Here, we utilize a hybrid analog/digital beamforming for the purpose of simultaneous ID and EH in such scenarios. This design, provides extra design degrees-of-freedom in eigen-mode selection for ID and EH purposes independently. Worst-case performance of this receiver structure is discussed. Finally, its benefits is compared to the classical receiver structure and the gains are highlighted. △ Less

Submitted 28 February, 2019; v1 submitted 6 November, 2017; originally announced November 2017.

Secrecy Rate Region of SWIPT Wiretap Interference Channels

Authors: Ali Kariminezhad, Zohaib Hassan Awan, Hendrik Vogt, Aydin Sezgin

Abstract: The secrecy rate region of wiretap interference channels with a multi-antenna passive eavesdropper is studied under receiver energy harvesting constraints. To stay operational in the network, the legitimate receivers demand energy alongside information, which is fulfilled by power transmission and exploiting a power splitting (PS) receiver. By simultaneous wireless information and power transfer (… ▽ More The secrecy rate region of wiretap interference channels with a multi-antenna passive eavesdropper is studied under receiver energy harvesting constraints. To stay operational in the network, the legitimate receivers demand energy alongside information, which is fulfilled by power transmission and exploiting a power splitting (PS) receiver. By simultaneous wireless information and power transfer (SWIPT), the amount of leakage to the eavesdropper increases, which in turn reduces the secrecy rates. For this setup, lower-bounds for secure communication rate are derived without imposing any limitation at the eavesdropper processing. These lower-bounds are then compared with the rates achieved by assuming the worst-case linear eavesdropper processing. We show that in certain special cases the worst-case eavesdropper does not enlarge the achievable secure rate region in comparison to the unconstrained eavesdropper case. It turns out that in order to achieve the Pareto boundary of the secrecy rate region, smart tuning of the transmit power and receiver PS coefficient is required. Hence, we propose an efficient algorithm to optimize these parameters jointly in polynomial-time. The secrecy rate region characterization is formulated as a weighted max-min optimization problem. This problem turns out to be a non-convex problem due to the non-convex constrained set. This set is replaced by a convex subset that in consequence leads to an achievable suboptimal solution which is improved iteratively. By solving the problem efficiently, we obtain the amount of rate loss for providing secrecy, meanwhile satisfying the energy demands. △ Less

Submitted 28 February, 2019; v1 submitted 4 September, 2017; originally announced September 2017.

Optimal Power Splitting for Simultaneous Information Detection and Energy Harvesting

Authors: Ali Kariminezhad, Soheil Gherekhloo, Aydin Sezgin

Abstract: This letter deals with the joint information and energy processing at a receiver of a point-to-point communication channel. In particular, the trade-off between the achievable information rate and harvested energy for a multiple-antenna power splitting (PS) receiver is investigated. Here, the rate- energy region characterization is of particular interest, which is intrinsically a non-convex proble… ▽ More This letter deals with the joint information and energy processing at a receiver of a point-to-point communication channel. In particular, the trade-off between the achievable information rate and harvested energy for a multiple-antenna power splitting (PS) receiver is investigated. Here, the rate- energy region characterization is of particular interest, which is intrinsically a non-convex problem. In this letter, an efficient algorithm is proposed for obtaining an approximate solution to the problem in polynomial time. This algorithm is mainly based on the Taylor approximation in conjunction with semidefinite relaxation (SDR) which is solved by interior-point methods. Moreover, we utilize the Gaussian randomization procedure to obtain a feasible solution for the original problem. It is shown that by proper receiver design the rate-energy region can be significantly enlarged compared to the state of the art, while at the same time the receiver hardware costs is reduced by utilizing less number of energy harvesting circuitry. △ Less

Submitted 14 April, 2017; originally announced April 2017.

Improper signaling and symbol extensions: How far can we go with Gaussian P2P codebooks in the interfering MAC with TIN?

Authors: Ali Kariminezhad, Anas Chaaban, Aydin Sezgin

Abstract: Meeting the challenges of 5G demands better exploitation of the available spectrum by allowing multiple parties to share resources. For instance, a secondary unlicensed system can share resources with the cellular uplink of a primary licensed system for an improved spectral efficiency. This induces interference which has to be taken into account when designing such a system. A simple yet robust st… ▽ More Meeting the challenges of 5G demands better exploitation of the available spectrum by allowing multiple parties to share resources. For instance, a secondary unlicensed system can share resources with the cellular uplink of a primary licensed system for an improved spectral efficiency. This induces interference which has to be taken into account when designing such a system. A simple yet robust strategy is treating interference as noise (TIN), which is widely adapted in practice. It is thus important to study the capabilities and limitations of TIN in such scenarios. In this paper, we study this scenario modelled as Multiple Access Channel (MAC) interfered by a Point-to-Point (P2P) channel. Here, we focus on rate maximization and power minimization problems separately. We use improper Gaussian signaling (instead of proper) at the transmitters to increase the design flexibility, which offers the freedom of optimizing the transmit signal pseudo-variance in addition to its variance. Furthermore, we allow correlation among the transmitted signals over orthogonal resource basis (i.e., time or frequency) for the purpose of optimal signaling design over the extended channel. We formulate the rate maximization problem as a semidefinite program, and use semidefinite relaxation (SDR) to obtain a near-optimal solution. Numerical optimizations show that, by improper Gaussian signaling the achievable rates can be improved upto three times depending on the strength of the interfering links. Furthermore, we observe significant benefits in power consumption by improper Gaussian signaling with symbol extensions compared to the traditional proper Gaussian signaling. Interestingly, by minimizing sum power given the solution of the rate maximization problem improves the energy efficiency significantly. △ Less

Submitted 7 July, 2016; originally announced July 2016.

Heterogeneous Multi-Tier Networks: Improper Signaling For Joint Rate-Energy Optimization

Authors: Ali Kariminezhad, Aydin Sezgin

Abstract: Wireless nodes in future communication systems need to overcome three barriers when compared to their transitional counterparts, namely to support significantly higher data rates, have long-lasting energy supplies and remain fully operational in interference-limited heterogeneous networks. This could be partially achieved by providing three promising features, which are radio frequency (RF) energy… ▽ More Wireless nodes in future communication systems need to overcome three barriers when compared to their transitional counterparts, namely to support significantly higher data rates, have long-lasting energy supplies and remain fully operational in interference-limited heterogeneous networks. This could be partially achieved by providing three promising features, which are radio frequency (RF) energy harvesting, improper Gaussian signaling and operating in full-duplex communication mode, i.e., transmit and receive at the same time within the same frequency band. In this paper, we consider these aspects jointly in a multi-antenna heterogeneous two-tier network. In this network, the users in the femto- cell are sharing the scarce resources with the cellular users in the macro-cell and have to cope with the interference from the macro-cell base station as well as the transmitter noise and residual self- interference (RSI) due to imperfect full-duplex operation. Interestingly enough, while these impairments are detrimental from the achievable rate perspective, they are beneficial from the energy harvesting aspect as they carry RF energy. In this paper, we consider this natural trade-off jointly and propose appropriate optimization problems for beamforming and optimal resource allocation. Moreover, various receiver structures are employed for both information detection (ID) and energy harvesting (EH) capabilities. The paper aims at characterizing the trade-off between the achievable rates and harvested energies. Rate and energy maximization problems are thoroughly investigated. Finally, the numerical illustrations demonstrate the impact of energy harvesting on the achievable rate performance. △ Less

Submitted 6 November, 2017; v1 submitted 1 March, 2016; originally announced March 2016.