Showing 1–12 of 12 results for author: Kapsalidis, F

Quantum Cascade Surface Emitting Lasers

Authors: David Stark, Filippos Kapsalidis, Sergej Markmann, Mathieu Bertrand, Bahareh Marzban, Emilio Gini, Mattias Beck, Jérôme Faist

Abstract: A low-cost single frequency laser emitting in the mid-infrared spectral region and dissipating minimal electrical power is a key ingredient for the next generation of portable gas sensors for high-volume applications involving chemical sensing of important greenhouse and pollutant gases. We propose here a Quantum Cascade Surface Emitting Laser (QCSEL), which we implement as a short linear cavity w… ▽ More A low-cost single frequency laser emitting in the mid-infrared spectral region and dissipating minimal electrical power is a key ingredient for the next generation of portable gas sensors for high-volume applications involving chemical sensing of important greenhouse and pollutant gases. We propose here a Quantum Cascade Surface Emitting Laser (QCSEL), which we implement as a short linear cavity with high reflectivity coated end-mirrors to suppress any edge emission and use a buried semiconductor diffraction grating to extract the light from the surface. By wafer-level testing we investigate the cavity length scaling, extract mirror reflectivities larger than 0.9, and achieve a pulsed threshold power dissipation of 237 mW for an emission wavelength near 7.5 $μ$m. Finally, we demonstrate single mode emission with a side-mode suppression ratio larger than 33 dB of a 248 $μ$m short cavity mounted with the epitaxial layer up and operated in continuous wave at 20 $^\circ$C. △ Less

Submitted 10 August, 2023; originally announced August 2023.

Exceptional Point Singularities in Multi-Section DFB Lasers

Authors: Mehran Shahmohammadi, Martin J. Süess, Romain Peretti, Filippos Kapsalidis, Andres Forrer, Mattias Beck, Jérôme Faist

Abstract: A laser exhibits both controllable gain and loss and, under proper design conditions, is an ideal non-Hermitian system allowing the direct observation and engineering of spectral singularities such as exceptional points (EPs). A dual section distributed feedback (DFB) quantum cascade laser (QCL) is a prototype of such a system, allowing the controlled coupling of a ladder of cavity Fabry-Perot (FP… ▽ More A laser exhibits both controllable gain and loss and, under proper design conditions, is an ideal non-Hermitian system allowing the direct observation and engineering of spectral singularities such as exceptional points (EPs). A dual section distributed feedback (DFB) quantum cascade laser (QCL) is a prototype of such a system, allowing the controlled coupling of a ladder of cavity Fabry-Perot (FP) modes to a quarter wave shifted DFB mode. Tuning the coupling strength and the gain difference between these two set of modes enables probing the regimes from weak coupling to strong coupling and the robust observation of exceptional point singularities. At these exceptional points, the laser exhibits a sequence of lasing and coherent prefect absorption dynamics1,2 when pumped above transparency. Additionally, the pum** scheme allows the deliberate lifting of the exceptional point degeneracy. These results show that dual section QCL is a perfect platform to study exceptional points because the coupling parameter and system loss can be tuned in a single device. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Synchronization of frequency combs by optical injection

Authors: Johannes Hillbrand, Mathieu Bertrand, Valentin Wittwer, Nikola Opacak, Filippos Kapsalidis, Michele Gianella, Lukas Emmenegger, Benedikt Schwarz, Thomas Südmeyer, Mattias Beck, Jérôme Faist

Abstract: Optical frequency combs based on semiconductor lasers are a promising technology for monolithic integration of dual-comb spectrometers. However, the stabilization of the offset frequency fceo remains a challenging feat due the lack of octave-spanning spectra. In a dual-comb configuration, the uncorrelated jitter of the offset frequencies leads to a non-periodic signal resulting in broadened beatno… ▽ More Optical frequency combs based on semiconductor lasers are a promising technology for monolithic integration of dual-comb spectrometers. However, the stabilization of the offset frequency fceo remains a challenging feat due the lack of octave-spanning spectra. In a dual-comb configuration, the uncorrelated jitter of the offset frequencies leads to a non-periodic signal resulting in broadened beatnotes with a limited signal-to-noise ratio (SNR). Hence, expensive data acquisition schemes and complex signal processing are currently required. Here, we show that the offset frequencies of two frequency combs can be synchronized by optical injection locking, which allows full phase-stabilization when combined with electrical injection. A single comb line isolated via an optical Vernier filter serves as Master oscillator for injection locking. The resulting dual-comb signal is periodic and stable over thousands of periods. This enables coherent averaging using analog electronics, which increases the SNR and reduces the data size by one and three orders of magnitude, respectively. The presented method will enable fully phase-stabilized dual-comb spectrometers by leveraging on integrated optical filters and provides access for measuring and stabilizing fceo. △ Less

Submitted 19 February, 2022; originally announced February 2022.

Comments: 7 pages, 4 figures

Controlling Quantum Cascade Laser Optical Frequency Combs through Microwave Injection

Authors: Barbara Schneider, Filippos Kapsalidis, Mathieu Bertrand, Matthew Singleton, Johannes Hillbrand, Mattias Beck, Jérôme Faist

Abstract: In this work, control over the precise state emitted by quantum cascade laser frequency combs through strong radio-frequency current modulation close to their repetition frequency is demonstrated. In particular, broadening of the spectrum from about 20 cm$^{-1}$ to 60cm$^{-1}$ can be achieved throughout most of the current dynamical range while preserving the coherence, as measured by shifted wave… ▽ More In this work, control over the precise state emitted by quantum cascade laser frequency combs through strong radio-frequency current modulation close to their repetition frequency is demonstrated. In particular, broadening of the spectrum from about 20 cm$^{-1}$ to 60cm$^{-1}$ can be achieved throughout most of the current dynamical range while preserving the coherence, as measured by shifted wave interference Fourier transform spectroscopy (SWIFTS). The required modulation frequency to achieve this broadening is red-shifted compared to the free-running beatnote frequency at increasing modulation powers starting from 25 dBm, whereas the range where it occurs narrows. Outside of this maximum-bandwidth range, the spectral bandwidth of the laser output is gradually reduced and the new center frequency is red- or blue-shifted, directly dependent on the detuning of the modulation frequency. By switching between two modulation frequencies detuned symmetrically with respect to the free-running beatnote, we can generate two multiplexed spectral regions with negligible overlap from the same device at rates of at least 20 kHz. In the time-domain we show with both SWIFTS and interferometric autocorrelation (IAC) measurements a transition from quasi-continuous output to pulsed ($τ_p \approx 55$ ps) output by ram** up the injection power to 35 dBm. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Femtosecond pulses from a mid-infrared quantum cascade laser

Authors: Philipp Täschler, Mathieu Bertrand, Barbara Schneider, Matthew Singleton, Pierre Jouy, Filippos Kapsalidis, Mattias Beck, Jérôme Faist

Abstract: The quantum cascade laser (QCL) has evolved to be a compact, powerful source of coherent mid-infrared (mid-IR) light. However, its fast gain dynamics strongly restricts the formation of ultrashort pulses. As such, the shortest pulses reported so far were limited to a few picoseconds with some hundreds of milliwatts of peak power, strongly narrowing their applicability for time-resolved and nonline… ▽ More The quantum cascade laser (QCL) has evolved to be a compact, powerful source of coherent mid-infrared (mid-IR) light. However, its fast gain dynamics strongly restricts the formation of ultrashort pulses. As such, the shortest pulses reported so far were limited to a few picoseconds with some hundreds of milliwatts of peak power, strongly narrowing their applicability for time-resolved and nonlinear experiments. Here, we demonstrate an alternative approach capable of producing near-transform-limited sub-picosecond pulses with several watts of peak power. Starting from a frequency modulated phase-locked state, which most efficiently exploits the gain of the active region, ultrashort high peak power pulses are generated via external pulse compression. We assess their temporal nature by means of a novel optical sampling method, coherent beat note interferometry and interferometric autocorrelation. These results open new pathways for nonlinear physics in the mid-infrared. △ Less

Submitted 10 September, 2021; v1 submitted 11 May, 2021; originally announced May 2021.

Ultra-low threshold lasing through phase front engineering via a metallic circular aperture

Authors: Zhixin Wang, Filippos Kapsalidis, Ruijun Wang, Mattias Beck, Jérôme Faist

Abstract: Semiconductor lasers with ultra-low thresholds and minimal footprints are a topic of active research. Such devices require a combination of high quality factor laser cavities with small active region volumes, which drives the quest for novel cavity geometries exploiting nano-optic concepts. For high-reflectivity coated ridge lasers, where light is tightly confined in the waveguide, a low threshold… ▽ More Semiconductor lasers with ultra-low thresholds and minimal footprints are a topic of active research. Such devices require a combination of high quality factor laser cavities with small active region volumes, which drives the quest for novel cavity geometries exploiting nano-optic concepts. For high-reflectivity coated ridge lasers, where light is tightly confined in the waveguide, a low threshold can only be achieved by strongly reducing the diffraction losses arising at the laser facet. We show here that, somewhat counter-intuitively, opening a carefully designed aperture in a metallic facet coating can simultaneously enhance both its transmission and modal reflectivity by correcting the phase front at the subwavelength scale. Numerical simulations and experimental results demonstrate a reduction of optical mirror loss by up to 40% while the transmission is increased by four orders of magnitude. Applying this approach to both facets of a short cavity quantum cascade laser, we achieve laser operation at room temperature with an electrical dissipation of only 143 mW. Such light sources are especially suitable for portable and battery-operated chemical agent sensing applications operating in the mid-infrared wavelength range, where multiple greenhouse and pollutant gases have their fundamental absorption lines. Our work suggests possibilities for further applications including frequency comb dispersion engineering, and can be implemented in a broad range of optoelectronic systems. △ Less

Submitted 6 April, 2021; v1 submitted 3 April, 2021; originally announced April 2021.

Comments: 8 pages, 3 figures

Mid-infrared quantum cascade laser frequency combs with a microstrip-like line waveguide geometry

Authors: Filippos Kapsalidis, Barbara Schneider, Matthew Singleton, Mathieu Bertrand, Emilio Gini, Mattias Beck, Jérôme Faist

Abstract: In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequenc… ▽ More In this work, a design for a mid-infrared quantum cascade laser (QCL) frequency comb source that enhances the high frequency response and the comb characteristics of the device is presented . A state-of-the-art active region (AR), grown on a heavily n-doped InP:Si substrate, was processed into a buried heterostructure with a microstrip-like line waveguide. As a result, the repetition rate frequency $f_{rep}$, around 11.09 GHz, can be locked to an injected narrow-linewidth radio frequency (RF) signal, over a range of more than 200 kHz with -10 dBm of injected power, which outperforms normal buried heterostructure schemes by an order of magnitude. Moreover, under RF injection at powers higher than 20 dBm, the lasing spectrum is flattened and significantly broadened, from 24 $cm^{-1}$ to 65 $cm^{-1}$ in bandwidth, while at the same time the coherence of the comb is maintained and verified. △ Less

Submitted 18 December, 2020; originally announced December 2020.

Mid-infrared quantum cascade laser frequency combs based on multi-section waveguides

Authors: Ruijun Wang, Philipp Taschler, Filippos Kapsalidis, Mehran Shahmohammadi, Mattias Beck, Jerome Faist

Abstract: We present quantum cascade laser (QCL) frequency comb devices with engineered waveguides for managing the dispersion. The QCL waveguide consists of multiple sections with different waveguide widths. The narrow and wide sections of the waveguide are designed in a way to compensate the group velocity dispersion (GVD) of each other and thereby produce a flat and slightly negative GVD for the QCL. The… ▽ More We present quantum cascade laser (QCL) frequency comb devices with engineered waveguides for managing the dispersion. The QCL waveguide consists of multiple sections with different waveguide widths. The narrow and wide sections of the waveguide are designed in a way to compensate the group velocity dispersion (GVD) of each other and thereby produce a flat and slightly negative GVD for the QCL. The QCL exhibits continuous comb operation over a large part of the dynamic range of the laser. Strong and narrow-linewidth intermode beatnotes are achieved in more than 300 mA wide operation current range. The comb device features also considerably high output power (>380 mW) and wide optical bandwidth (>55 cm-1) △ Less

Submitted 27 October, 2020; originally announced October 2020.

Journal ref: Optics Letters 45, 6462 (2020)

High-resolution and gapless dual comb spectroscopy with current-tuned quantum cascade lasers

Authors: Michele Gianella, Akshay Nataraj, Béla Tuzson, Pierre Jouy, Filippos Kapsalidis, Mattias Beck, Markus Mangold, Andreas Hugi, Jérôme Faist, Lukas Emmenegger

Abstract: We present gapless, high-resolution absorption and dispersion spectra obtained with quantum cascade laser frequency combs covering 55 cm$^{-1}$. Using phase-sensitive dual comb design, the comb lines are gradually swept over 10 GHz, corresponding to the free spectral range of the laser devices, by applying a current modulation. We show that with interleaving the spectral point spacing is reduced b… ▽ More We present gapless, high-resolution absorption and dispersion spectra obtained with quantum cascade laser frequency combs covering 55 cm$^{-1}$. Using phase-sensitive dual comb design, the comb lines are gradually swept over 10 GHz, corresponding to the free spectral range of the laser devices, by applying a current modulation. We show that with interleaving the spectral point spacing is reduced by more than four orders of magnitude over the full spectral span of the frequency comb. The potential of this technique for high-precision gas sensing is illustrated by measuring the low pressure (107 hPa) absorption and dispersion spectra of methane spanning the range of 1170 cm$^{-1}$ - 1225 cm$^{-1}$ with a resolution of 0.001 cm$^{-1}$. △ Less

Submitted 23 December, 2019; v1 submitted 14 October, 2019; originally announced October 2019.

Mixing properties of room temperature patch-antenna receivers in a mid-infrared (9um) heterodyne system

Authors: A. Bigioli, D. Gacemi, D. Palaferri, Y. Todorov, A. Vasanelli, S. Suffit, L. Li, A. G. Davies, E. H. Linfield, F. Kapsalidis, M. Beck, J. Faist, C. Sirtori

Abstract: A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear respon… ▽ More A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear response up to very high optical power, an essential feature for heterodyne detection. By an accurate passive stabilization of the local oscillator and minimizing the optical feed-back the system reaches, at room temperature, a record value of noise equivalent power of 30 pW at 9um. Finally, it is demonstrated that the injection of microwave signal into our receivers shifts the heterodyne beating over the bandwidth of the devices. This mixing property is a unique valuable function of these devices for signal treatment. △ Less

Submitted 11 July, 2019; originally announced July 2019.

Coupled-waveguides for dispersion compensation in semiconductor lasers

Authors: Yves Bidaux, Filippos Kapsalidis, Pierre Jouy, Mattias Beck, Jérôme Faist

Abstract: The generation of optical frequency combs via direct electrical pum** of semiconductor lasers is an attractive alternative to the well-established mode-locked laser sources in terms of compactness, robustness and integrability. However, the high chromatic dispersion of bulk semiconductor materials can prevent the generation of frequency combs or lead to undesired pulse lengthening. In this lette… ▽ More The generation of optical frequency combs via direct electrical pum** of semiconductor lasers is an attractive alternative to the well-established mode-locked laser sources in terms of compactness, robustness and integrability. However, the high chromatic dispersion of bulk semiconductor materials can prevent the generation of frequency combs or lead to undesired pulse lengthening. In this letter, we present a novel dual waveguide for intracavity dispersion compensation in semiconductor lasers. We apply the concept to a short mid-infrared wavelength quantum cascade laser operating in the first atmospheric window (λ$ \approx$ 4.6 μm). As a result, stable comb operation on the full dynamical range is achieved in this device. Unlike previously proposed schemes, the dual waveguide approach can be applied to various types of semiconductor lasers and material systems. In particular, it could enable efficient group velocity dispersion compensation at near-infrared wavelengths where semiconductor materials exhibit a large value of that parameter. △ Less

Submitted 24 November, 2017; originally announced November 2017.

Room temperature 9 $μ$m photodetectors and GHz heterodyne receivers

Authors: Daniele Palaferri, Yanko Todorov, Azzurra Bigioli, Alireza Mottaghizadeh, Djamal Gacemi, Allegra Calabrese, Angela Vasanelli, Lianhe Li, A. Giles Davies, Edmund H. Linfield, Filippos Kapsalidis, Mattias Beck, Jérôme Faist, Carlo Sirtori

Abstract: Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature… ▽ More Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-based free-space communication$^{3-5}$ have therefore had to be realised at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high temperature operation$^{6, 7}$. Here, we show that a 9 $μ$m quantum well infrared photodetector$^8$, implemented in a metamaterial made of subwavelength metallic resonators$^{9-12}$, has strongly enhanced performances up to room temperature. This occurs because the photonic collection area is increased with respect to the electrical area for each resonator, thus significantly reducing the dark current of the device$^{13}$. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature$^{14, 15}$, which constrains conventional geometries at cryogenic operation$^6$. Finally, the reduced physical area of the device and its increased responsivity allows us, for the first time, to take advantage of the intrinsic high frequency response of the quantum detector$^7$ at room temperature. By beating two quantum cascade lasers$^{16}$ we have measured the heterodyne signal at high frequencies up to 4 GHz. △ Less

Submitted 6 September, 2017; originally announced September 2017.