-
A new view of the solar interface region from the Interface Region Imaging Spectrograph (IRIS)
Authors:
B. De Pontieu,
V. Polito,
V. Hansteen,
P. Testa,
K. K. Reeves,
P. Antolin,
D. Nobrega-Siverio,
A. Kowalski,
J. Martinez-Sykora,
M. Carlsson,
S. W. McIntosh,
W. Liu,
A. Daw,
C. C. Kankelborg
Abstract:
The Interface Region Imaging Spectrograph (IRIS) has been obtaining near- and far-ultraviolet images and spectra of the solar atmosphere since July 2013. The unique combination of near and far-ultraviolet spectra and images at subarcsecond resolution and high cadence allows the tracing of mass and energy through the critical interface between the solar surface and the corona or solar wind. IRIS ha…
▽ More
The Interface Region Imaging Spectrograph (IRIS) has been obtaining near- and far-ultraviolet images and spectra of the solar atmosphere since July 2013. The unique combination of near and far-ultraviolet spectra and images at subarcsecond resolution and high cadence allows the tracing of mass and energy through the critical interface between the solar surface and the corona or solar wind. IRIS has enabled research into the fundamental physical processes thought to play a role in the low solar atmosphere such as ion-neutral interactions, magnetic reconnection, the generation, propagation, and dissipation of various types of waves, the acceleration of non-thermal particles, and various small-scale instabilities. These new findings have helped provide novel insights into a wide range of phenomena including the discovery of non-thermal particles in coronal nanoflares, the formation and impact of spicules and other jets, resonant absorption and dissipation of Alfvenic waves, energy release associated with braiding of magnetic field lines, the thermal instability in the chromosphere-corona mass and energy cycle, the contribution of waves, turbulence, and non-thermal particles in the energy deposition during flares and smaller-scale events such as UV bursts, and the role of flux ropes and other mechanisms in triggering CMEs. IRIS observations have also advanced studies of the connections between solar and stellar physics. Advances in numerical modeling, inversion codes, and machine learning techniques have played a key role in driving these new insights. With the advent of exciting new instrumentation both on the ground (e.g., DKIST, ALMA) and space-based (e.g., Parker Solar Probe, Solar Orbiter), we aim to review new insights based on IRIS observations or related modeling, and highlight some of the outstanding challenges that have been brought to the fore.
△ Less
Submitted 31 March, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
The Interface Region Imaging Spectrograph (IRIS)
Authors:
B. De Pontieu,
A. M. Title,
J. Lemen,
G. D. Kushner,
D. J. Akin,
B. Allard,
T. Berger,
P. Boerner,
M. Cheung,
C. Chou,
J. F. Drake,
D. W. Duncan,
S. Freeland,
G. F. Heyman,
C. Hoffman,
N. E. Hurlburt,
R. W. Lindgren,
D. Mathur,
R. Rehse,
D. Sabolish,
R. Seguin,
C. J. Schrijver,
T. D. Tarbell,
J. -P. Wuelser,
C. J. Wolfson
, et al. (63 additional authors not shown)
Abstract:
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using…
▽ More
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332-1358, 1389-1407 and 2783-2834 Angstrom including bright spectral lines formed in the chromosphere (Mg II h 2803 Angstrom and Mg II k 2796 Angstrom) and transition region (C II 1334/1335 Angstrom and Si IV 1394/1403 Angstrom). Slit-jaw images in four different passbands (C II 1330, Si IV 1400, Mg II k 2796 and Mg II wing 2830 Angstrom) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec x 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Coronal Loop Expansion Properties Explained Using Separators
Authors:
Joseph E. Plowman,
Charles C. Kankelborg,
Dana W. Longcope
Abstract:
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at t…
▽ More
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at their footpoints. Coronal loops correspond to areas of the solar corona which have been preferentially heated by some process, so this observed property might be connected to the mechanisms that heat the corona. One means of energy deposition is magnetic reconnection, which occurs along field lines called separators. These field lines begin and end on magnetic null points, and loops forming near them can therefore be relatively wide at their bases. Thus, coronal energization by magnetic reconnection may replicate the puzzling expansion properties observed in coronal loops. We present results of a Monte Carlo survey of separator field line expansion properties, comparing them to the observed properties of coronal loops.
△ Less
Submitted 19 March, 2009;
originally announced March 2009.
-
Reconnectionless CME eruption: putting the Aly-Sturrock conjecture to rest
Authors:
L. A. Rachmeler,
C. E. DeForest,
C. C. Kankelborg
Abstract:
We demonstrate that magnetic reconnection is not necessary to initiate fast CMEs. The Aly-Sturrock conjecture states that the magnetic energy of a given force free boundary field is maximized when the field is open. This is problematic for CME initiation because it leaves little or no magnetic energy to drive the eruption, unless reconnection is present to allow some of the field to escape witho…
▽ More
We demonstrate that magnetic reconnection is not necessary to initiate fast CMEs. The Aly-Sturrock conjecture states that the magnetic energy of a given force free boundary field is maximized when the field is open. This is problematic for CME initiation because it leaves little or no magnetic energy to drive the eruption, unless reconnection is present to allow some of the field to escape without opening. Thus, it has been thought that reconnection must be present to initiate CMEs. This theory has not been subject to rigorous numerical testing because conventional MHD numerical models contain numerical diffusion, which introduces uncontrolled numerical reconnection. We use a quasi-Lagrangian simulation technique to run the first controlled experiments of CME initiation in the complete lack of reconnection. We find that a flux rope confined by an arcade, when twisted beyond a critical amount, can escape to an open state, allowing some of the surrounding arcade to shrink and releasing magnetic energy from the global field. This mechanism includes a true ideal MHD instability. We conclude that reconnection is not a necessary trigger for fast CME eruptions.
△ Less
Submitted 17 December, 2008;
originally announced December 2008.
-
Coronal Tomography
Authors:
Charles C. Kankelborg
Abstract:
A simple, yet powerful, algorithm for computed tomography of the solar corona is presented and demonstrated using synthetic EUV data. A minimum of three perspectives are required. These may be obtained from STEREO/EUVI plus an instrument near Earth, e.g. TRACE or SOHO/EIT.
A simple, yet powerful, algorithm for computed tomography of the solar corona is presented and demonstrated using synthetic EUV data. A minimum of three perspectives are required. These may be obtained from STEREO/EUVI plus an instrument near Earth, e.g. TRACE or SOHO/EIT.
△ Less
Submitted 15 July, 2008; v1 submitted 30 June, 2008;
originally announced June 2008.
-
The Sensitivity of Hybrid Differential Stereoscopy for Spectral Imaging
Authors:
Craig E. DeForest,
Charles C. Kankelborg
Abstract:
Stereoscopic spectral imaging is an observing technique that affords rapid acquisition of limited spectral information over an entire image plane simultaneously. Light from a telescope is dispersed into multiple spectral orders, which are imaged separately, and two or more of the dispersed images are combined using an analogy between the (x,y,λ) spectral data space and conventional (x,y,z) three…
▽ More
Stereoscopic spectral imaging is an observing technique that affords rapid acquisition of limited spectral information over an entire image plane simultaneously. Light from a telescope is dispersed into multiple spectral orders, which are imaged separately, and two or more of the dispersed images are combined using an analogy between the (x,y,λ) spectral data space and conventional (x,y,z) three-space. Because no photons are deliberately destroyed during image acquisition, the technique is much more photon-efficient in some observing regimes than existing techniques such as scanned-filtergraph or scanned-slit spectral imaging. Hybrid differential stereoscopy, which uses a combination of conventional cross-correlation stereoscopy and linear approximation theory to extract the central wavelength of a spectral line, has been used to produce solar Stokes-V (line-of-sight) magnetograms in the 617.34 nm Fe I line, and more sophisticated inversion techniques are currently being used to derive Doppler and line separation data from EUV images of the solar corona collected in the neighboring lines of He-II and Si-XI at 30.4 nm. In this paper we develop an analytic a priori treatment of noise in the line shift signal derived from hybrid differential stereoscopy. We use the analysis to estimate the noise level and measurement precision in a high resolution solar magnetograph based on stereoscopic spectral imaging, compare those estimates to a test observation made in 2003, and discuss implications for future instruments.
△ Less
Submitted 16 April, 2007;
originally announced April 2007.
-
Fluxon Modeling of Low-Beta Plasmas
Authors:
Craig E. DeForest,
Charles C. Kankelborg
Abstract:
We have developed a new, quasi-Lagrangian approach for numerical modeling of magnetohydrodynamics in low to moderate $β$ plasmas such as the solar corona. We introduce the concept of a ``fluxon'', a discretized field line. Fluxon models represent the magnetic field as a skeleton of such discrete field lines, and interpolate field values from the geometry of the skeleton where needed, reversing t…
▽ More
We have developed a new, quasi-Lagrangian approach for numerical modeling of magnetohydrodynamics in low to moderate $β$ plasmas such as the solar corona. We introduce the concept of a ``fluxon'', a discretized field line. Fluxon models represent the magnetic field as a skeleton of such discrete field lines, and interpolate field values from the geometry of the skeleton where needed, reversing the usual direction of the field line transform. The fluxon skeleton forms the grid for a collection of 1-D Eulerian models of plasma along individual flux tubes. Fluxon models have no numerical resistivity, because they preserve topology explicitly. Our prototype code, \emph{FLUX}, is currently able to find 3-D nonlinear force-free field solutions with a specified field topology, and work is ongoing to validate and extend the code to full magnetohydrodynamics. FLUX has significant scaling advantages over conventional models: for ``magnetic carpet'' models, with photospheric line-tied boundary conditions, FLUX simulations scale in complexity like a conventional 2-D grid although the full 3-D field is represented. The code is free software and is available online. In this current paper we introduce fluxons and our prototype code, and describe the course of future work with the code.
△ Less
Submitted 18 September, 2006;
originally announced September 2006.
