-
A Spherical Shells Model of Atmospheric Absorption for Instrument Calibration
Authors:
Nicolas Donders,
Genevieve Vigil,
Adam Kobelski,
Amy Winebarger,
Larry Paxton,
Charles Kankelborg,
Gary Zank
Abstract:
We present a model for atmospheric absorption of solar ultraviolet (UV) radiation. The initial motivation for this work is to predict this effect and correct it in Sounding Rocket (SR) experiments. In particular, the Full-sun Ultraviolet Rocket Spectrograph (FURST) is anticipated to launch in mid-2023. FURST has the potential to observe UV absorption while imaging solar spectra between 120-181 nm,…
▽ More
We present a model for atmospheric absorption of solar ultraviolet (UV) radiation. The initial motivation for this work is to predict this effect and correct it in Sounding Rocket (SR) experiments. In particular, the Full-sun Ultraviolet Rocket Spectrograph (FURST) is anticipated to launch in mid-2023. FURST has the potential to observe UV absorption while imaging solar spectra between 120-181 nm, at a resolution of R > 2x10$^4$ ($Δ$ V < $\pm$ 15 km/s), and at altitudes of between 110-255 km. This model uses estimates for density and temperature, as well as laboratory measurements of the absorption cross-section, to predict the UV absorption of solar radiation at high altitudes. Refraction correction is discussed and partially implemented but is negligible for the results presented. Absorption by molecular Oxygen is the primary driver within the UV spectral range of our interest. The model is built with a wide range of applications in mind. The primary result is a method for inversion of the absorption cross-section from images obtained during an instrument flight, even if atmospheric observations were not initially intended. The potential to obtain measurements of atmospheric properties is an exciting prospect, especially since sounding rockets are the only method currently available for probing this altitude in situ. Simulation of noisy spectral images along the FURST flight profile is performed using data from the High-Resolution Telescope and Spectrograph (HRTS) SR and the FISM2 model for comparison. Analysis of these simulated signals allows us to capture the Signal-to-Noise Ratio (SNR) of FURST and the capability to measure atmospheric absorption properties as a function of altitude. Based on the prevalence of distinct spectral features, our calculations demonstrate that atmospheric absorption may be used to perform wavelength calibration from in-flight data.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
A new view of the solar interface region from the Interface Region Imaging Spectrograph (IRIS)
Authors:
B. De Pontieu,
V. Polito,
V. Hansteen,
P. Testa,
K. K. Reeves,
P. Antolin,
D. Nobrega-Siverio,
A. Kowalski,
J. Martinez-Sykora,
M. Carlsson,
S. W. McIntosh,
W. Liu,
A. Daw,
C. C. Kankelborg
Abstract:
The Interface Region Imaging Spectrograph (IRIS) has been obtaining near- and far-ultraviolet images and spectra of the solar atmosphere since July 2013. The unique combination of near and far-ultraviolet spectra and images at subarcsecond resolution and high cadence allows the tracing of mass and energy through the critical interface between the solar surface and the corona or solar wind. IRIS ha…
▽ More
The Interface Region Imaging Spectrograph (IRIS) has been obtaining near- and far-ultraviolet images and spectra of the solar atmosphere since July 2013. The unique combination of near and far-ultraviolet spectra and images at subarcsecond resolution and high cadence allows the tracing of mass and energy through the critical interface between the solar surface and the corona or solar wind. IRIS has enabled research into the fundamental physical processes thought to play a role in the low solar atmosphere such as ion-neutral interactions, magnetic reconnection, the generation, propagation, and dissipation of various types of waves, the acceleration of non-thermal particles, and various small-scale instabilities. These new findings have helped provide novel insights into a wide range of phenomena including the discovery of non-thermal particles in coronal nanoflares, the formation and impact of spicules and other jets, resonant absorption and dissipation of Alfvenic waves, energy release associated with braiding of magnetic field lines, the thermal instability in the chromosphere-corona mass and energy cycle, the contribution of waves, turbulence, and non-thermal particles in the energy deposition during flares and smaller-scale events such as UV bursts, and the role of flux ropes and other mechanisms in triggering CMEs. IRIS observations have also advanced studies of the connections between solar and stellar physics. Advances in numerical modeling, inversion codes, and machine learning techniques have played a key role in driving these new insights. With the advent of exciting new instrumentation both on the ground (e.g., DKIST, ALMA) and space-based (e.g., Parker Solar Probe, Solar Orbiter), we aim to review new insights based on IRIS observations or related modeling, and highlight some of the outstanding challenges that have been brought to the fore.
△ Less
Submitted 31 March, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Internetwork chromospheric bright grains observed with IRIS
Authors:
Juan Martínez-Sykora,
Luc Rouppe van der Voort,
Mats Carlsson,
Bart De Pontieu,
Tiago M. D. Pereira,
Paul Boerner,
Neal Hurlburt,
Lucia Kleint,
James Lemen,
Ted D. Tarbell,
Alan Title,
Jean-Pierre Wuelser,
Viggo H. Hansteen,
Leon Golub,
Sean McKillop,
Kathy K. Reeves,
Steven Saar,
Paola Testa,
Hui Tian,
Sarah Jaeggli,
Charles Kankelborg
Abstract:
The Interface Region Imaging Spectrograph (IRIS) reveals small-scale rapid brightenings in the form of bright grains all over coronal holes and the quiet sun. These bright grains are seen with the IRIS 1330 Å, 1400 Å and 2796 Å slit-jaw filters. We combine coordinated observations with IRIS and from the ground with the Swedish 1-m Solar Telescope (SST) which allows us to have chromospheric (Ca II…
▽ More
The Interface Region Imaging Spectrograph (IRIS) reveals small-scale rapid brightenings in the form of bright grains all over coronal holes and the quiet sun. These bright grains are seen with the IRIS 1330 Å, 1400 Å and 2796 Å slit-jaw filters. We combine coordinated observations with IRIS and from the ground with the Swedish 1-m Solar Telescope (SST) which allows us to have chromospheric (Ca II 8542 Å, Ca II H 3968 Å, Hα, and Mg II k 2796 Å), and transition region (C II 1334 Å, Si IV 1402) spectral imaging, and single-wavelength Stokes maps in Fe I 6302 Åat high spatial (0.33"), temporal and spectral resolution. We conclude that the IRIS slit-jaw grains are the counterpart of so-called acoustic grains, i.e., resulting from chromospheric acoustic waves in a non-magnetic environment. We compare slit-jaw images with spectra from the IRIS spectrograph. We conclude that the grain intensity in the 2796 Å slit-jaw filter comes from both the Mg II k core and wings. The signal in the C II and Si IV lines is too weak to explain the presence of grains in the 1300 and 1400 Å slit-jaw images and we conclude that the grain signal in these passbands comes mostly from the continuum. Even though weak, the characteristic shock signatures of acoustic grains can often be detected in IRIS C II spectra. For some grains, spectral signature can be found in IRIS Si IV. This suggests that upward propagating acoustic waves sometimes reach all the way up to the transition region.
△ Less
Submitted 11 February, 2015;
originally announced February 2015.
-
Homologous Helical Jets: Observations by IRIS, SDO and Hinode and Magnetic Modeling with Data-Driven Simulations
Authors:
Mark C. M. Cheung,
B. De Pontieu,
T. D. Tarbell,
Y. Fu,
H. Tian,
P. Testa,
K. K. Reeves,
J. Martinez-Sykora,
P. Boerner,
J. P. Wuelser,
J. Lemen,
A. M. Title,
N. Hurlburt,
L. Kleint,
C. Kankelborg,
S. Jaeggli,
L. Golub,
S. McKillop,
S. Saar,
M. Carlsson,
V. Hansteen
Abstract:
We report on observations of recurrent jets by instruments onboard the Interface Region Imaging Spectrograph (IRIS), Solar Dynamics Observatory (SDO) and Hinode spacecrafts. Over a 4-hour period on July 21st 2013, recurrent coronal jets were observed to emanate from NOAA Active Region 11793. FUV spectra probing plasma at transition region temperatures show evidence of oppositely directed flows wit…
▽ More
We report on observations of recurrent jets by instruments onboard the Interface Region Imaging Spectrograph (IRIS), Solar Dynamics Observatory (SDO) and Hinode spacecrafts. Over a 4-hour period on July 21st 2013, recurrent coronal jets were observed to emanate from NOAA Active Region 11793. FUV spectra probing plasma at transition region temperatures show evidence of oppositely directed flows with components reaching Doppler velocities of +/- 100 km/s. Raster Doppler maps using a Si IV transition region line show all four jets to have helical motion of the same sense. Simultaneous observations of the region by SDO and Hinode show that the jets emanate from a source region comprising a pore embedded in the interior of a supergranule. The parasitic pore has opposite polarity flux compared to the surrounding network field. This leads to a spine-fan magnetic topology in the coronal field that is amenable to jet formation. Time-dependent data-driven simulations are used to investigate the underlying drivers for the jets. These numerical experiments show that the emergence of current-carrying magnetic field in the vicinity of the pore supplies the magnetic twist needed for recurrent helical jet formation.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
The Unresolved Fine Structure Resolved - IRIS observations of the Solar Transition Region
Authors:
V. Hansteen,
B. De Pontieu,
M. Carlsson,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
T. M. D. Pereira,
E. E. De Luca,
L. Golub,
S. McKillop,
K. Reeves,
S. Saar,
P. Testa,
H. Tian,
C. Kankelborg,
S. Jaeggli,
L. Kleint,
J. Martinez-Sykora
Abstract:
The heating of the outer solar atmospheric layers, i.e., the transition region and corona, to high temperatures is a long standing problem in solar (and stellar) physics. Solutions have been hampered by an incomplete understanding of the magnetically controlled structure of these regions. The high spatial and temporal resolution observations with the Interface Region Imaging Spectrograph (IRIS) at…
▽ More
The heating of the outer solar atmospheric layers, i.e., the transition region and corona, to high temperatures is a long standing problem in solar (and stellar) physics. Solutions have been hampered by an incomplete understanding of the magnetically controlled structure of these regions. The high spatial and temporal resolution observations with the Interface Region Imaging Spectrograph (IRIS) at the solar limb reveal a plethora of short, low lying loops or loop segments at transition-region temperatures that vary rapidly, on the timescales of minutes. We argue that the existence of these loops solves a long standing observational mystery. At the same time, based on comparison with numerical models, this detection sheds light on a critical piece of the coronal heating puzzle.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
-
On the prevalence of small-scale twist in the solar chromosphere and transition region
Authors:
B. De Pontieu,
L. Rouppe van der Voort,
S. W. McIntosh,
T. M. D. Pereira,
M. Carlsson,
V. Hansteen,
H. Skogsrud,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
E. E. De Luca,
L. Golub,
S. McKillop,
K. Reeves,
S. Saar,
P. Testa,
H. Tian,
C. Kankelborg,
S. Jaeggli,
L. Kleint,
J. Martinez-Sykora
Abstract:
The solar chromosphere and transition region (TR) form an interface between the Sun's surface and its hot outer atmosphere. Here most of the non-thermal energy that powers the solar atmosphere is transformed into heat, although the detailed mechanism remains elusive. High-resolution (0.33-arcsec) observations with NASA's Interface Region Imaging Spectrograph (IRIS) reveal a chromosphere and TR tha…
▽ More
The solar chromosphere and transition region (TR) form an interface between the Sun's surface and its hot outer atmosphere. Here most of the non-thermal energy that powers the solar atmosphere is transformed into heat, although the detailed mechanism remains elusive. High-resolution (0.33-arcsec) observations with NASA's Interface Region Imaging Spectrograph (IRIS) reveal a chromosphere and TR that are replete with twist or torsional motions on sub-arcsecond scales, occurring in active regions, quiet Sun regions, and coronal holes alike. We coordinated observations with the Swedish 1-m Solar Telescope (SST) to quantify these twisting motions and their association with rapid heating to at least TR temperatures. This view of the interface region provides insight into what heats the low solar atmosphere.
△ Less
Submitted 24 October, 2014;
originally announced October 2014.
-
Prevalence of Small-scale Jets from the Networks of the Solar Transition Region and Chromosphere
Authors:
H. Tian,
E. E. DeLuca,
S. R. Cranmer,
B. De Pontieu,
H. Peter,
J. Martínez-Sykora,
L. Golub,
S. McKillop,
K. K. Reeves,
M. P. Miralles,
P. McCauley,
S. Saar,
P. Testa,
M. Weber,
N. Murphy,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
L. Kleint,
C. Kankelborg,
S. Jaeggli,
M. Carlsson
, et al. (2 additional authors not shown)
Abstract:
As the interface between the Sun's photosphere and corona, the chromosphere and transition region play a key role in the formation and acceleration of the solar wind. Observations from the Interface Region Imaging Spectrograph reveal the prevalence of intermittent small-scale jets with speeds of 80-250 km/s from the narrow bright network lanes of this interface region. These jets have lifetimes of…
▽ More
As the interface between the Sun's photosphere and corona, the chromosphere and transition region play a key role in the formation and acceleration of the solar wind. Observations from the Interface Region Imaging Spectrograph reveal the prevalence of intermittent small-scale jets with speeds of 80-250 km/s from the narrow bright network lanes of this interface region. These jets have lifetimes of 20-80 seconds and widths of 300 km or less. They originate from small-scale bright regions, often preceded by footpoint brightenings and accompanied by transverse waves with ~20 km/s amplitudes. Many jets reach temperatures of at least ~100000 K and constitute an important element of the transition region structures. They are likely an intermittent but persistent source of mass and energy for the solar wind.
△ Less
Submitted 22 December, 2014; v1 submitted 22 October, 2014;
originally announced October 2014.
-
Evidence of Non-Thermal Particles in Coronal Loops Heated Impulsively by Nanoflares
Authors:
Paola Testa,
Bart De Pontieu,
Joel Allred,
Mats Carlsson,
Fabio Reale,
Adrian Daw,
Viggo Hansteen,
Juan Martinez-Sykora,
Wei Liu,
Ed DeLuca,
Leon Golub,
Sean McKillop,
Kathy Reeves,
Steve Saar,
Hui Tian,
Jim Lemen,
Alan Title,
Paul Boerner,
Neal Hurlburt,
Ted Tarbell,
J. P. Wuelser,
Lucia Kleint,
Charles Kankelborg,
Sarah Jaeggli
Abstract:
The physical processes causing energy exchange between the Sun's hot corona and its cool lower atmosphere remain poorly understood. The chromosphere and transition region (TR) form an interface region between the surface and the corona that is highly sensitive to the coronal heating mechanism. High resolution observations with the Interface Region Imaging Spectrograph (IRIS) reveal rapid variabili…
▽ More
The physical processes causing energy exchange between the Sun's hot corona and its cool lower atmosphere remain poorly understood. The chromosphere and transition region (TR) form an interface region between the surface and the corona that is highly sensitive to the coronal heating mechanism. High resolution observations with the Interface Region Imaging Spectrograph (IRIS) reveal rapid variability (about 20 to 60 seconds) of intensity and velocity on small spatial scales at the footpoints of hot dynamic coronal loops. The observations are consistent with numerical simulations of heating by beams of non-thermal electrons, which are generated in small impulsive heating events called "coronal nanoflares". The accelerated electrons deposit a sizable fraction of their energy in the chromosphere and TR. Our analysis provides tight constraints on the properties of such electron beams and new diagnostics for their presence in the nonflaring corona.
△ Less
Submitted 22 October, 2014;
originally announced October 2014.
-
Hot Explosions in the Cool Atmosphere of the Sun
Authors:
H. Peter,
H. Tian,
W. Curdt,
D. Schmit,
D. Innes,
B. De Pontieu,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
J. Martínez-Sykora,
L. Kleint,
L. Golub,
S. McKillop,
K. K. Reeves,
S. Saar,
P. Testa,
C. Kankelborg,
S. Jaeggli,
M. Carlsson,
V. Hansteen
Abstract:
The solar atmosphere was traditionally represented with a simple one-dimensional model. Over the past few decades, this paradigm shifted for the chromosphere and corona that constitute the outer atmosphere, which is now considered a dynamic structured envelope. Recent observations by IRIS (Interface Region Imaging Spectrograph) reveal that it is difficult to determine what is up and down even in t…
▽ More
The solar atmosphere was traditionally represented with a simple one-dimensional model. Over the past few decades, this paradigm shifted for the chromosphere and corona that constitute the outer atmosphere, which is now considered a dynamic structured envelope. Recent observations by IRIS (Interface Region Imaging Spectrograph) reveal that it is difficult to determine what is up and down even in the cool 6000-K photosphere just above the solar surface: this region hosts pockets of hot plasma transiently heated to almost 100,000 K. The energy to heat and accelerate the plasma requires a considerable fraction of the energy from flares, the largest solar disruptions. These IRIS observations not only confirm that the photosphere is more complex than conventionally thought, but also provide insight into the energy conversion in the process of magnetic reconnection.
△ Less
Submitted 21 October, 2014;
originally announced October 2014.
-
An Interface Region Imaging Spectrograph first view on Solar Spicules
Authors:
T. M. D. Pereira,
B. De Pontieu,
M. Carlsson,
V. Hansteen,
T. D. Tarbell,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
J. P. Wülser,
J. Martínez-Sykora,
L. Kleint,
L. Golub,
S. McKillop,
K. K. Reeves,
S. Saar,
P. Testa,
H. Tian,
S. Jaeggli,
C. Kankelborg
Abstract:
Solar spicules have eluded modelers and observers for decades. Since the discovery of the more energetic type II, spicules have become a heated topic but their contribution to the energy balance of the low solar atmosphere remains unknown. Here we give a first glimpse of what quiet Sun spicules look like when observed with NASA's recently launched Interface Region Imaging Spectrograph (IRIS). Usin…
▽ More
Solar spicules have eluded modelers and observers for decades. Since the discovery of the more energetic type II, spicules have become a heated topic but their contribution to the energy balance of the low solar atmosphere remains unknown. Here we give a first glimpse of what quiet Sun spicules look like when observed with NASA's recently launched Interface Region Imaging Spectrograph (IRIS). Using IRIS spectra and filtergrams that sample the chromosphere and transition region we compare the properties and evolution of spicules as observed in a coordinated campaign with Hinode and the Atmospheric Imaging Assembly. Our IRIS observations allow us to follow the thermal evolution of type II spicules and finally confirm that the fading of Ca II H spicules appears to be caused by rapid heating to higher temperatures. The IRIS spicules do not fade but continue evolving, reaching higher and falling back down after 500-800 s. Ca II H type II spicules are thus the initial stages of violent and hotter events that mostly remain invisible in Ca II H filtergrams. These events have very different properties from type I spicules, which show lower velocities and no fading from chromospheric passbands. The IRIS spectra of spicules show the same signature as their proposed disk counterparts, reinforcing earlier work. Spectroheliograms from spectral rasters also confirm that quiet Sun spicules originate in bushes from the magnetic network. Our results suggest that type II spicules are indeed the site of vigorous heating (to at least transition region temperatures) along extensive parts of the upward moving spicular plasma.
△ Less
Submitted 23 July, 2014;
originally announced July 2014.
-
Detection of supersonic downflows and associated heating events in the transition region above sunspots
Authors:
L. Kleint,
P. Antolin,
H. Tian,
P. Judge,
P. Testa,
B. De Pontieu,
J. Martínez-Sykora,
K. K. Reeves,
J. P. Wuelser,
S. McKillop,
S. Saar,
M. Carlsson,
P. Boerner,
N. Hurlburt,
J. Lemen,
T. D. Tarbell,
A. Title,
L. Golub,
V. Hansteen,
S. Jaeggli,
C. Kankelborg
Abstract:
IRIS data allow us to study the solar transition region (TR) with an unprecedented spatial resolution of 0.33 arcsec. On 2013 August 30, we observed bursts of high Doppler shifts suggesting strong supersonic downflows of up to 200 km/s and weaker, slightly slower upflows in the spectral lines Mg II h and k, C II 1336 Å, Si IV 1394 Å, and 1403 Å, that are correlated with brightenings in the slitjaw…
▽ More
IRIS data allow us to study the solar transition region (TR) with an unprecedented spatial resolution of 0.33 arcsec. On 2013 August 30, we observed bursts of high Doppler shifts suggesting strong supersonic downflows of up to 200 km/s and weaker, slightly slower upflows in the spectral lines Mg II h and k, C II 1336 Å, Si IV 1394 Å, and 1403 Å, that are correlated with brightenings in the slitjaw images (SJIs). The bursty behavior lasts throughout the 2 hr observation, with average burst durations of about 20 s. The locations of these short-lived events appear to be the umbral and penumbral footpoints of EUV loops. Fast apparent downflows are observed along these loops in the SJIs and in AIA, suggesting that the loops are thermally unstable. We interpret the observations as cool material falling from coronal heights, and especially coronal rain produced along the thermally unstable loops, which leads to an increase of intensity at the loop footpoints, probably indicating an increase of density and temperature in the TR. The rain speeds are on the higher end of previously reported speeds for this phenomenon, and possibly higher than the free-fall velocity along the loops. On other observing days, similar bright dots are sometimes aligned into ribbons, resembling small flare ribbons. These observations provide a first insight into small-scale heating events in sunspots in the TR.
△ Less
Submitted 26 June, 2014;
originally announced June 2014.
-
High-resolution Observations of the Shock Wave Behavior for Sunspot Oscillations with the Interface Region Imaging Spectrograph
Authors:
H. Tian,
E. DeLuca,
K. K. Reeves,
S. McKillop,
B. De Pontieu,
J. Martínez-Sykora,
M. Carlsson,
V. Hansteen,
L. Kleint,
M. Cheung,
L. Golub,
S. Saar,
P. Testa,
M. Weber,
J. Lemen,
A. Title,
P. Boerner,
N. Hurlburt,
T. D. Tarbell,
J. P. Wuelser,
C. Kankelborg,
S. Jaeggli,
S. W. McIntosh
Abstract:
We present the first results of sunspot oscillations from observations by the Interface Region Imaging Spectrograph. The strongly nonlinear oscillation is identified in both the slit-jaw images and the spectra of several emission lines formed in the transition region and chromosphere. We first apply a single Gaussian fit to the profiles of the Mgii 2796.35 Å, Cii 1335.71 Å, and Si iv 1393.76 Å lin…
▽ More
We present the first results of sunspot oscillations from observations by the Interface Region Imaging Spectrograph. The strongly nonlinear oscillation is identified in both the slit-jaw images and the spectra of several emission lines formed in the transition region and chromosphere. We first apply a single Gaussian fit to the profiles of the Mgii 2796.35 Å, Cii 1335.71 Å, and Si iv 1393.76 Å lines in the sunspot. The intensity change is about 30%. The Doppler shift oscillation reveals a sawtooth pattern with an amplitude of about 10 km/s in Si iv. In the umbra the Si iv oscillation lags those of Cii and Mgii by about 3 and 12 s, respectively. The line width suddenly increases as the Doppler shift changes from redshift to blueshift. However, we demonstrate that this increase is caused by the superposition of two emission components. We then perform detailed analysis of the line profiles at a few selected locations on the slit. The temporal evolution of the line core is dominated by the following behavior: a rapid excursion to the blue side, accompanied by an intensity increase, followed by a linear decrease of the velocity to the red side. The maximum intensity slightly lags the maximum blueshift in Si iv, whereas the intensity enhancement slightly precedes the maximum blueshift in Mgii. We find a positive correlation between the maximum velocity and deceleration, a result that is consistent with numerical simulations of upward propagating magnetoacoustic shock waves.
△ Less
Submitted 17 June, 2014; v1 submitted 24 April, 2014;
originally announced April 2014.
-
The Interface Region Imaging Spectrograph (IRIS)
Authors:
B. De Pontieu,
A. M. Title,
J. Lemen,
G. D. Kushner,
D. J. Akin,
B. Allard,
T. Berger,
P. Boerner,
M. Cheung,
C. Chou,
J. F. Drake,
D. W. Duncan,
S. Freeland,
G. F. Heyman,
C. Hoffman,
N. E. Hurlburt,
R. W. Lindgren,
D. Mathur,
R. Rehse,
D. Sabolish,
R. Seguin,
C. J. Schrijver,
T. D. Tarbell,
J. -P. Wuelser,
C. J. Wolfson
, et al. (63 additional authors not shown)
Abstract:
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using…
▽ More
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332-1358, 1389-1407 and 2783-2834 Angstrom including bright spectral lines formed in the chromosphere (Mg II h 2803 Angstrom and Mg II k 2796 Angstrom) and transition region (C II 1334/1335 Angstrom and Si IV 1394/1403 Angstrom). Slit-jaw images in four different passbands (C II 1330, Si IV 1400, Mg II k 2796 and Mg II wing 2830 Angstrom) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec x 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Fast Differential Emission Measure Inversion of Solar Coronal Data
Authors:
Joseph Plowman,
Charles Kankelborg,
Petrus Martens
Abstract:
We present a fast method for reconstructing Differential Emission Measures (DEMs) using solar coronal data. On average, the method computes over 1000 DEMs per second for a sample active region observed by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO), and achieves reduced chi-squared of order unity with no negative emission in all but a few test cases. The high per…
▽ More
We present a fast method for reconstructing Differential Emission Measures (DEMs) using solar coronal data. On average, the method computes over 1000 DEMs per second for a sample active region observed by the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO), and achieves reduced chi-squared of order unity with no negative emission in all but a few test cases. The high performance of this method is especially relevant in the context of AIA, which images of order one million solar pixels per second. This paper describes the method, analyzes its fidelity, compares its performance and results with other DEM methods, and applies it to an active region and loop observed by AIA and by the Extreme-ultraviolet Imaging Spectrometer (EIS) on Hinode.
△ Less
Submitted 22 October, 2012; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Science Objectives for an X-Ray Microcalorimeter Observing the Sun
Authors:
J. Martin Laming,
J. Adams,
D. Alexander,
M Aschwanden,
C. Bailey,
S. Bandler,
J. Bookbinder,
S. Bradshaw,
N. Brickhouse,
J. Chervenak,
S. Christe,
J. Cirtain,
S. Cranmer,
S. Deiker,
E. DeLuca,
G. Del Zanna,
B. Dennis,
G. Doschek,
M. Eckart,
A. Fludra,
F. Finkbeiner,
P. Grigis,
R. Harrison,
L. Ji,
C. Kankelborg
, et al. (35 additional authors not shown)
Abstract:
We present the science case for a broadband X-ray imager with high-resolution spectroscopy, including simulations of X-ray spectral diagnostics of both active regions and solar flares. This is part of a trilogy of white papers discussing science, instrument (Bandler et al. 2010), and missions (Bookbinder et al. 2010) to exploit major advances recently made in transition-edge sensor (TES) detector…
▽ More
We present the science case for a broadband X-ray imager with high-resolution spectroscopy, including simulations of X-ray spectral diagnostics of both active regions and solar flares. This is part of a trilogy of white papers discussing science, instrument (Bandler et al. 2010), and missions (Bookbinder et al. 2010) to exploit major advances recently made in transition-edge sensor (TES) detector technology that enable resolution better than 2 eV in an array that can handle high count rates. Combined with a modest X-ray mirror, this instrument would combine arcsecondscale imaging with high-resolution spectra over a field of view sufficiently large for the study of active regions and flares, enabling a wide range of studies such as the detection of microheating in active regions, ion-resolved velocity flows, and the presence of non-thermal electrons in hot plasmas. It would also enable more direct comparisons between solar and stellar soft X-ray spectra, a waveband in which (unusually) we currently have much better stellar data than we do of the Sun.
△ Less
Submitted 17 November, 2010;
originally announced November 2010.
-
Coronal Loop Expansion Properties Explained Using Separators
Authors:
Joseph E. Plowman,
Charles C. Kankelborg,
Dana W. Longcope
Abstract:
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at t…
▽ More
One puzzling observed property of coronal loops is that they are of roughly constant thickness along their length. Various studies have found no consistent pattern of width variation along the length of loops observed by TRACE and SOHO. This is at odds with expectations of magnetic flux tube expansion properties, which suggests that loops are widest at their tops, and significantly narrower at their footpoints. Coronal loops correspond to areas of the solar corona which have been preferentially heated by some process, so this observed property might be connected to the mechanisms that heat the corona. One means of energy deposition is magnetic reconnection, which occurs along field lines called separators. These field lines begin and end on magnetic null points, and loops forming near them can therefore be relatively wide at their bases. Thus, coronal energization by magnetic reconnection may replicate the puzzling expansion properties observed in coronal loops. We present results of a Monte Carlo survey of separator field line expansion properties, comparing them to the observed properties of coronal loops.
△ Less
Submitted 19 March, 2009;
originally announced March 2009.
-
Reconnectionless CME eruption: putting the Aly-Sturrock conjecture to rest
Authors:
L. A. Rachmeler,
C. E. DeForest,
C. C. Kankelborg
Abstract:
We demonstrate that magnetic reconnection is not necessary to initiate fast CMEs. The Aly-Sturrock conjecture states that the magnetic energy of a given force free boundary field is maximized when the field is open. This is problematic for CME initiation because it leaves little or no magnetic energy to drive the eruption, unless reconnection is present to allow some of the field to escape witho…
▽ More
We demonstrate that magnetic reconnection is not necessary to initiate fast CMEs. The Aly-Sturrock conjecture states that the magnetic energy of a given force free boundary field is maximized when the field is open. This is problematic for CME initiation because it leaves little or no magnetic energy to drive the eruption, unless reconnection is present to allow some of the field to escape without opening. Thus, it has been thought that reconnection must be present to initiate CMEs. This theory has not been subject to rigorous numerical testing because conventional MHD numerical models contain numerical diffusion, which introduces uncontrolled numerical reconnection. We use a quasi-Lagrangian simulation technique to run the first controlled experiments of CME initiation in the complete lack of reconnection. We find that a flux rope confined by an arcade, when twisted beyond a critical amount, can escape to an open state, allowing some of the surrounding arcade to shrink and releasing magnetic energy from the global field. This mechanism includes a true ideal MHD instability. We conclude that reconnection is not a necessary trigger for fast CME eruptions.
△ Less
Submitted 17 December, 2008;
originally announced December 2008.
-
Coronal Tomography
Authors:
Charles C. Kankelborg
Abstract:
A simple, yet powerful, algorithm for computed tomography of the solar corona is presented and demonstrated using synthetic EUV data. A minimum of three perspectives are required. These may be obtained from STEREO/EUVI plus an instrument near Earth, e.g. TRACE or SOHO/EIT.
A simple, yet powerful, algorithm for computed tomography of the solar corona is presented and demonstrated using synthetic EUV data. A minimum of three perspectives are required. These may be obtained from STEREO/EUVI plus an instrument near Earth, e.g. TRACE or SOHO/EIT.
△ Less
Submitted 15 July, 2008; v1 submitted 30 June, 2008;
originally announced June 2008.
-
The Sensitivity of Hybrid Differential Stereoscopy for Spectral Imaging
Authors:
Craig E. DeForest,
Charles C. Kankelborg
Abstract:
Stereoscopic spectral imaging is an observing technique that affords rapid acquisition of limited spectral information over an entire image plane simultaneously. Light from a telescope is dispersed into multiple spectral orders, which are imaged separately, and two or more of the dispersed images are combined using an analogy between the (x,y,λ) spectral data space and conventional (x,y,z) three…
▽ More
Stereoscopic spectral imaging is an observing technique that affords rapid acquisition of limited spectral information over an entire image plane simultaneously. Light from a telescope is dispersed into multiple spectral orders, which are imaged separately, and two or more of the dispersed images are combined using an analogy between the (x,y,λ) spectral data space and conventional (x,y,z) three-space. Because no photons are deliberately destroyed during image acquisition, the technique is much more photon-efficient in some observing regimes than existing techniques such as scanned-filtergraph or scanned-slit spectral imaging. Hybrid differential stereoscopy, which uses a combination of conventional cross-correlation stereoscopy and linear approximation theory to extract the central wavelength of a spectral line, has been used to produce solar Stokes-V (line-of-sight) magnetograms in the 617.34 nm Fe I line, and more sophisticated inversion techniques are currently being used to derive Doppler and line separation data from EUV images of the solar corona collected in the neighboring lines of He-II and Si-XI at 30.4 nm. In this paper we develop an analytic a priori treatment of noise in the line shift signal derived from hybrid differential stereoscopy. We use the analysis to estimate the noise level and measurement precision in a high resolution solar magnetograph based on stereoscopic spectral imaging, compare those estimates to a test observation made in 2003, and discuss implications for future instruments.
△ Less
Submitted 16 April, 2007;
originally announced April 2007.
-
Fluxon Modeling of Low-Beta Plasmas
Authors:
Craig E. DeForest,
Charles C. Kankelborg
Abstract:
We have developed a new, quasi-Lagrangian approach for numerical modeling of magnetohydrodynamics in low to moderate $β$ plasmas such as the solar corona. We introduce the concept of a ``fluxon'', a discretized field line. Fluxon models represent the magnetic field as a skeleton of such discrete field lines, and interpolate field values from the geometry of the skeleton where needed, reversing t…
▽ More
We have developed a new, quasi-Lagrangian approach for numerical modeling of magnetohydrodynamics in low to moderate $β$ plasmas such as the solar corona. We introduce the concept of a ``fluxon'', a discretized field line. Fluxon models represent the magnetic field as a skeleton of such discrete field lines, and interpolate field values from the geometry of the skeleton where needed, reversing the usual direction of the field line transform. The fluxon skeleton forms the grid for a collection of 1-D Eulerian models of plasma along individual flux tubes. Fluxon models have no numerical resistivity, because they preserve topology explicitly. Our prototype code, \emph{FLUX}, is currently able to find 3-D nonlinear force-free field solutions with a specified field topology, and work is ongoing to validate and extend the code to full magnetohydrodynamics. FLUX has significant scaling advantages over conventional models: for ``magnetic carpet'' models, with photospheric line-tied boundary conditions, FLUX simulations scale in complexity like a conventional 2-D grid although the full 3-D field is represented. The code is free software and is available online. In this current paper we introduce fluxons and our prototype code, and describe the course of future work with the code.
△ Less
Submitted 18 September, 2006;
originally announced September 2006.