-
Temperature-independent ferromagnetic resonance shift in Bi-doped YIG garnets through magnetic anisotropy tuning
Authors:
Diane Gouéré,
Hugo Merbouche,
Aya El Kanj,
Felix Kohl,
Cécile Carrétéro,
Isabella Boventer,
Romain Lebrun,
Paolo Bortolotti,
Vincent Cros,
Jamal Ben Youssef,
Abdelmadjid Anane
Abstract:
Thin garnet films are becoming central for magnon-spintronics and spin-orbitronics devices as they show versatile magnetic properties together with low magnetic losses. These fields would benefit from materials in which heat does not affect the magnetization dynamics, an effect known as the non-linear thermal frequency shift. In this study, low dam** Bi substituted Iron garnet (Bi:YIG) ultra-thi…
▽ More
Thin garnet films are becoming central for magnon-spintronics and spin-orbitronics devices as they show versatile magnetic properties together with low magnetic losses. These fields would benefit from materials in which heat does not affect the magnetization dynamics, an effect known as the non-linear thermal frequency shift. In this study, low dam** Bi substituted Iron garnet (Bi:YIG) ultra-thin films have been grown using Pulsed Laser Deposition. Through a fine tuning of the growth parameters, the precise control of the perpendicular magnetic anisotropy allows to achieve a full compensation of the dipolar magnetic anisotropy. Strikingly, once the growth conditions are optimized, varying the growth temperature from 405 °C to 475 °C as the only tuning parameter induces the easy-axis to go from out-of-plane to in-plane. For films that are close to the dipolar compensation, Ferromagnetic Resonance measurements yield an effective magnetization $μ_{0}M_{eff} (T)$ that has almost no temperature dependence over a large temperature range (260 K to 400 K) resulting in an anisotropy temperature exponent of 2. These findings put Bi:YIG system among the very few materials in which the temperature dependence of the magnetic anisotropy varies at the same rate than the saturation magnetization. This interesting behavior is ascribed phenomenologically to the sizable orbital moment of $Bi^{3+}$.
△ Less
Submitted 1 February, 2023;
originally announced February 2023.
-
Buckling-induced transmission switching in phononic waveguides in the presence of disorder
Authors:
Ali Kanj,
Alexander F. Vakakis,
Sameh Tawfick
Abstract:
On-chip phononic circuits tailor the transmission of elastic waves, which can couple to electronic and photonic systems, enabling new signal manipulation capabilities. Phononic circuits rely on waveguides that transmit elastic waves within desired frequency passbands, typically designed based on the Bloch modes of the waveguide constitutive cell, assuming linearity and periodicity. MEMS waveguides…
▽ More
On-chip phononic circuits tailor the transmission of elastic waves, which can couple to electronic and photonic systems, enabling new signal manipulation capabilities. Phononic circuits rely on waveguides that transmit elastic waves within desired frequency passbands, typically designed based on the Bloch modes of the waveguide constitutive cell, assuming linearity and periodicity. MEMS waveguides composed of coupled drumhead (membrane) resonators offer tunable MHz operation frequencies for applications in nonlinear optomechanics, topological insulators, phononic cavities, and acoustic switching. Here, we construct a reduced-order model (ROM) to demonstrate the switching of signal transmission in drumhead-resonator waveguides due to thermoelastic buckling. The ROM shows that buckling amplifies existing structural disorders, breaking the periodicity required for waveguide transmission through the first passband. This periodicity breaking manifests in the localization of the first-passband modes, like classical Anderson localization caused by disorders. The proposed ROM is essential to study the investigated phenomena since Bloch mode analysis fails for weakly-disordered (< 5%) finite waveguides due to the disorder amplification caused by the thermoelastic buckling. The illustrated transmission control should be useful for logical acoustic operations, like switching, and can be extended to 2D circuits in the future.
△ Less
Submitted 27 January, 2023;
originally announced January 2023.
-
Antiferromagnetic magnon spintronic based on non-reciprocal and non-degenerated ultra-fast spin-waves in the canted antiferromagnet α-Fe2O3
Authors:
A. El Kanj,
O. Gomonay,
I. Boventer,
P. Bortolotti,
V. Cros,
A. Anane,
R. Lebrun
Abstract:
Spin-waves in antiferromagnets hold the prospects for the development of faster, less power-hungry electronics, as well as promising physics based on spin-superfluids and coherent magnon-condensates. For both these perspectives, addressing electrically coherent antiferromagnetic spin-waves is of importance, a prerequisite that has so far been elusive, because unlike ferromagnets,antiferromagnets c…
▽ More
Spin-waves in antiferromagnets hold the prospects for the development of faster, less power-hungry electronics, as well as promising physics based on spin-superfluids and coherent magnon-condensates. For both these perspectives, addressing electrically coherent antiferromagnetic spin-waves is of importance, a prerequisite that has so far been elusive, because unlike ferromagnets,antiferromagnets couple weakly to radiofrequency fields. Here, we demonstrate the detection of ultra-fast non-reciprocal spin-waves in the dipolar-exchange regime of a canted antiferromagnet using both inductive and spintronic transducers. Using time-of-flight spin-wave spectroscopy on hematite (α-Fe2O3), we find that the magnon wave packets can propagate as fast as 20 km/s for reciprocal bulk spin-wave modes and up to 6 km/s for surface-spin waves propagating parallel to the antiferromagnetic Neel vector. We finally achieve efficient electrical detection of non-reciprocal spin-wave transport using non-local inverse spin-Hall effects. The electrical detection of coherent non-reciprocal antiferromagnetic spin waves paves the way for the development of antiferromagnetic and altermagnet-based magnonic devices.
△ Less
Submitted 18 August, 2023; v1 submitted 16 January, 2023;
originally announced January 2023.
-
Ultra-tuning of nonlinear drumhead MEMS resonators by electro-thermoelastic buckling
Authors:
Ali Kanj,
Paolo F. Ferrari,
Arend M. van der Zande,
Alexander F. Vakakis,
Sameh Tawfick
Abstract:
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators…
▽ More
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators undergo electrostatically-mediated thermoelastic buckling which tunes their natural frequency from 4.7 to 11.3 MHz, a factor of 2.4x tunability. Moreover, the imposed buckling switches the nonlinearity of the resonators between purely stiffening, purely softening, and even softening-to-stiffening. Accessing these exotic dynamics requires precise control of the temperature and the DC electrostatic forces near the resonator's critical-buckling point. To explain the observed tunability, we develop a one-dimensional physics-based ROM that predicts the linear and nonlinear response of the fundamental bending mode of these drumhead resonators. The ROM captures the dynamic effects of the internal stresses resulting from three sources: The residual stresses from the fabrication process, the mismatch in thermal expansion between the constituent layers, and lastly, the applied electrostatic forces. The ROM replicates the observed tunability of linear (within 5.5% error) and nonlinear responses even near the states of critical buckling. These remarkable nonlinear and large tunability of the natural frequency are valuable features for on-chip acoustic devices in broad applications such as signal manipulation, filtering, and MEMS waveguides.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Design, Dynamics, and Dissipation of a Torsional-Magnetic Spring Mechanism
Authors:
Ali Kanj,
Rhinithaa P. Thanalakshme,
Chengzhang Li,
John Kulikowski,
Gaurav Bahl,
Sameh Tawfick
Abstract:
We present an analytical and experimental study of torsional magnetic mechanism where the restoring torque is due to magnetic field interactions between rotating and fixed permanent magnets. The oscillator consists of a ball bearing-supported permanent magnet, called the rotor, placed between two fixed permanent magnets called the stators. Perturbing the rotor from its equilibrium angle induces a…
▽ More
We present an analytical and experimental study of torsional magnetic mechanism where the restoring torque is due to magnetic field interactions between rotating and fixed permanent magnets. The oscillator consists of a ball bearing-supported permanent magnet, called the rotor, placed between two fixed permanent magnets called the stators. Perturbing the rotor from its equilibrium angle induces a restoring magnetic torque whose effect is modeled as a torsional spring. This restoring effect is accompanied by dissipation mechanisms arising from structural viscoelasticity, air and electromagnetic dam**, as well as friction in the ball bearings. To investigate the system dynamics, we constructed an experimental setup capable of mechanical, electrical and magnetic measurements. For various rotor-stator gaps in this setup, we validated an analytical model that assumes viscous and dry (Coulomb) dam** during the rotor free response. Moreover, we forced the rotor by a neighboring electromagnetic coil into high amplitude oscillations. We observed unusual resonator nonlinearity: at large rotor-stator gaps, the oscillations are softening; at reduced gaps, the oscillations stiffen-then-soften. The developed reduced-order models capture the nonlinear effects of the rotor-to-stator and the rotor-to-coil distances. These magnetic oscillators are promising in low-frequency electromagnetic signal transmission and in designing magneto-elastic metamaterials with tailorable nonlinearity.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
Magneto-Mechanical Transmitters for Ultra-Low Frequency Near-field Communication
Authors:
Rhinithaa P. Thanalakshme,
Ali Kanj,
JunHwan Kim,
Elias Wilken-Resman,
Jiheng **g,
Inbar H. Grinberg,
Jennifer T. Bernhard,
Sameh Tawfick,
Gaurav Bahl
Abstract:
Electromagnetic signals in the ultra-low frequency (ULF) range below 3 kHz are well suited for underwater and underground wireless communication thanks to low signal attenuation and high penetration depth. However, it is challenging to design ULF transmitters that are simultaneously compact and energy efficient using traditional approaches, e.g., using coils or dipole antennas. Recent works have c…
▽ More
Electromagnetic signals in the ultra-low frequency (ULF) range below 3 kHz are well suited for underwater and underground wireless communication thanks to low signal attenuation and high penetration depth. However, it is challenging to design ULF transmitters that are simultaneously compact and energy efficient using traditional approaches, e.g., using coils or dipole antennas. Recent works have considered magneto-mechanical alternatives, in which ULF magnetic fields are generated using the motion of permanent magnets, since they enable extremely compact ULF transmitters that can operate with low energy consumption and are suitable for human-portable applications. Here we explore the design and operating principles of resonant magneto-mechanical transmitters (MMT) that operate over frequencies spanning a few 10's of Hz up to 1 kHz. We experimentally demonstrate two types of MMT designs using both single-rotor and multi-rotor architectures. We study the nonlinear electro-mechanical dynamics of MMTs using point dipole approximation and magneto-static simulations. We further experimentally explore techniques to control the operation frequency and demonstrate amplitude modulation up to 10 bits-per-second.
△ Less
Submitted 2 January, 2021; v1 submitted 28 December, 2020;
originally announced December 2020.
-
Self Sustained Thermally Induced Gas-Damped Oscillations of Bimetal Cantilevers with Application to the Design of a New Pyroelectric Micro Energy Harvester
Authors:
Tarek Gebrael,
Ali Kanj,
Daniel Farhat,
Mutasem Shehadeh,
Issam Lakkis
Abstract:
Low efficiency is the main drawback of many MEMS thermal energy harvesters. Recently, energy harvesting micro-devices that operate using the pyroelectric effect gained attention due to their potential superior performance. Operation of these devices is based on the cyclic motion of a pyroelectric capacitor that operates between a high temperature and a low temperature reservoirs. In this paper, we…
▽ More
Low efficiency is the main drawback of many MEMS thermal energy harvesters. Recently, energy harvesting micro-devices that operate using the pyroelectric effect gained attention due to their potential superior performance. Operation of these devices is based on the cyclic motion of a pyroelectric capacitor that operates between a high temperature and a low temperature reservoirs. In this paper, we investigate the dynamics of oscillations of a pyroelectric capacitor self sustained by thermally actuated bimetal micro-cantilevers, a topic which is so far under investigated. In addition to highlighting key thermodynamic aspects of the operation, we explore conditions for self-sustained oscillations and discuss the viability of operation at the mechanical resonance frequency. The analysis is presented for a new design inspired by the device proposed in Refs.\cite{2011,2012}, where in contrast, our proposed design boasts the following features: The pyroelectric capacitor remains parallel to the heat reservoirs, by virtue of its symmetric support by two bimetallic cantilever beams; In addition, the cyclic operation of the device does not require physical contact, thus lowering the risk of mechanical failure; To adjust the dam** force imparted by the surrounding gas, the thermal reservoirs are equipped with trenches. To study the dynamic operation of the device, we developed a physically based reduced order, yet accurate, model that accounts for the heat transfer between and within the different components, and for the various forces including the gas dam** force. The model is embedded within an optimization algorithm to produce optimal designs over the range 26-38 C of temperature difference between the two reservoirs. The corresponding range of harvested power density is 0.4-0.65 mW/cm2.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
The role of twins in computing planar supports of hypergraphs
Authors:
René van Bevern,
Iyad A. Kanj,
Christian Komusiewicz,
Rolf Niedermeier,
Manuel Sorge
Abstract:
A support or realization of a hypergraph $H$ is a graph $G$ on the same vertex as $H$ such that for each hyperedge of $H$ it holds that its vertices induce a connected subgraph of $G$. The NP-hard problem of finding a planar support has applications in hypergraph drawing and network design. Previous algorithms for the problem assume that twins -- pairs of vertices that are in precisely the same hy…
▽ More
A support or realization of a hypergraph $H$ is a graph $G$ on the same vertex as $H$ such that for each hyperedge of $H$ it holds that its vertices induce a connected subgraph of $G$. The NP-hard problem of finding a planar support has applications in hypergraph drawing and network design. Previous algorithms for the problem assume that twins -- pairs of vertices that are in precisely the same hyperedges -- can safely be removed from the input hypergraph. We prove that this assumption is generally wrong, yet that the number of twins necessary for a hypergraph to have a planar support only depends on its number of hyperedges. We give an explicit upper bound on the number of twins necessary for a hypergraph with $m$ hyperedges to have an $r$-outerplanar support, which depends only on $r$ and $m$. Since all additional twins can be safely removed, we obtain a linear-time algorithm for computing $r$-outerplanar supports for hypergraphs with $m$ hyperedges if $m$ and $r$ are constant; in other words, the problem is fixed-parameter linear-time solvable with respect to the parameters $m$ and $r$.
△ Less
Submitted 1 August, 2022; v1 submitted 15 November, 2015;
originally announced November 2015.
-
Frequency and time transfer for metrology and beyond using telecommunication network fibres
Authors:
Olivier Lopez,
Fabien Kéfélian,
Haifeng Jiang,
Adil Haboucha,
Anthony Bercy,
Fabio Stefani,
Bruno Chanteau,
Amale Kanj,
Daniele Rovera,
Joseph Achkar,
Christian Chardonnet,
Paul-Eric Pottie,
Anne Amy-Klein,
Giorgio Santarelli
Abstract:
The distribution and the comparison of an ultra-stable optical frequency and accurate time using optical fibres have been greatly improved in the last ten years. The frequency stability and accuracy of optical links surpass well-established methods using the global navigation satellite system and geostationary satellites. In this paper, we present a review of the methods and the results obtained.…
▽ More
The distribution and the comparison of an ultra-stable optical frequency and accurate time using optical fibres have been greatly improved in the last ten years. The frequency stability and accuracy of optical links surpass well-established methods using the global navigation satellite system and geostationary satellites. In this paper, we present a review of the methods and the results obtained. We show that public telecommunication network carrying Internet data can be used to compare and distribute ultra-stable metrological signals over long distances. This novel technique paves the way for the deployment of a national and continental ultra-stable metrological optical network.
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
Simultaneous remote transfer of accurate timing and optical frequency over a public fiber network
Authors:
Olivier Lopez,
Amale Kanj,
Paul-Eric Pottie,
Giovanni D. Rovera,
Joseph Achkar,
Christian Chardonnet,
Anne Amy-Klein,
Giorgio Santarelli
Abstract:
In this work we demonstrate for the first time that it is possible to transfer simultaneously an ultra-stable optical frequency and a precise and accurate timing over 540 km using a public telecommunication optical fiber networks with Internet data. The optical phase is used to carry both the frequency information and the timestamps by modulating a very narrow optical carrier at 1.55 $μ$m with spr…
▽ More
In this work we demonstrate for the first time that it is possible to transfer simultaneously an ultra-stable optical frequency and a precise and accurate timing over 540 km using a public telecommunication optical fiber networks with Internet data. The optical phase is used to carry both the frequency information and the timestamps by modulating a very narrow optical carrier at 1.55 $μ$m with spread spectrum signals using two-way satellite time transfer modems. The results in term of absolute time accuracy (250 ps) and long-term timing stability (20 ps) well outperform the conventional Global Navigation Satellite System or geostationary transfer methods.
△ Less
Submitted 4 October, 2012; v1 submitted 21 September, 2012;
originally announced September 2012.
-
On Geometric Spanners of Euclidean and Unit Disk Graphs
Authors:
Iyad A. Kanj,
Ljubomir Perkovic
Abstract:
We consider the problem of constructing bounded-degree planar geometric spanners of Euclidean and unit-disk graphs. It is well known that the Delaunay subgraph is a planar geometric spanner with stretch factor $C_{del\approx 2.42$; however, its degree may not be bounded. Our first result is a very simple linear time algorithm for constructing a subgraph of the Delaunay graph with stretch factor…
▽ More
We consider the problem of constructing bounded-degree planar geometric spanners of Euclidean and unit-disk graphs. It is well known that the Delaunay subgraph is a planar geometric spanner with stretch factor $C_{del\approx 2.42$; however, its degree may not be bounded. Our first result is a very simple linear time algorithm for constructing a subgraph of the Delaunay graph with stretch factor $ρ=1+2π(k\cos{\frac{π{k)^{-1$ and degree bounded by $k$, for any integer parameter $k\geq 14$. This result immediately implies an algorithm for constructing a planar geometric spanner of a Euclidean graph with stretch factor $ρ\cdot C_{del$ and degree bounded by $k$, for any integer parameter $k\geq 14$. Moreover, the resulting spanner contains a Euclidean Minimum Spanning Tree (EMST) as a subgraph. Our second contribution lies in develo** the structural results necessary to transfer our analysis and algorithm from Euclidean graphs to unit disk graphs, the usual model for wireless ad-hoc networks. We obtain a very simple distributed, {\em strictly-localized algorithm that, given a unit disk graph embedded in the plane, constructs a geometric spanner with the above stretch factor and degree bound, and also containing an EMST as a subgraph. The obtained results dramatically improve the previous results in all aspects, as shown in the paper.
△ Less
Submitted 20 February, 2008;
originally announced February 2008.