-
R&D towards the CMS RPC Phase-2 upgrade
Authors:
A. Fagot,
A. Cimmino,
S. Crucy,
M. Gul,
A. A. O. Rios,
M. Tytgat,
N. Zaganidis,
S. Aly,
Y. Assran,
A. Radi,
A. Sayed,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
V. Bhatnagar
, et al. (71 additional authors not shown)
Abstract:
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle…
▽ More
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle named RE3/1 and RE4/1. These stations will use RPCs with finer granularity and good timing resolution to mitigate background effects and to increase the redundancy of the system.
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
High rate, fast timing Glass RPC for the high η CMS muon detectors
Authors:
F. Lagarde,
M. Gouzevitch,
I. Laktineh,
V. Buridon,
X. Chen,
C. Combaret,
A. Eynard,
L. Germani,
G. Grenier,
H. Mathez,
L. Mirabito,
A. Petrukhin,
A. Steen,
W. Tromeuraa,
Y. Wang,
A. Gongab,
N. Moreau,
C. de la Taille,
F. Dulucqac,
A. Cimmino,
S. Crucy,
A. Fagot,
M. Gul,
A. A. O. Rios,
M. Tytgat
, et al. (86 additional authors not shown)
Abstract:
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expec…
▽ More
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided.
△ Less
Submitted 22 July, 2016; v1 submitted 4 June, 2016;
originally announced June 2016.
-
Metallic Indium Monolayers on Si(111)
Authors:
Jae Whan Park,
Myung Ho Kang
Abstract:
Density-functional calculations are used to identify one-atom-thick metallic In overlayers on the Si(111) surface, which have long been sought in quest of the ultimate two-dimensional (2D) limit of free-electron-like metallic properties. We predict two metastable single-layer In phases, one $\sqrt{7}\times\sqrt{3}$ phase with a coverage of 1.4 monolayer (ML; here 1 ML refers to one In atom per top…
▽ More
Density-functional calculations are used to identify one-atom-thick metallic In overlayers on the Si(111) surface, which have long been sought in quest of the ultimate two-dimensional (2D) limit of free-electron-like metallic properties. We predict two metastable single-layer In phases, one $\sqrt{7}\times\sqrt{3}$ phase with a coverage of 1.4 monolayer (ML; here 1 ML refers to one In atom per top Si atom) and the other $\sqrt{7}\times\sqrt{7}$ phase with 1.43 ML, which indeed match well with experimental evidences. Both phases reveal quasi-1D arrangements of protruded In atoms, leading to 2D-metallic but anisotropic band structures and Fermi surfaces. This directional feature contrasts with the free-electron-like In-overlayer properties that are known to persist up to the double-layer thickness, implying that we may have achieved the 2D limit of free-electron-like In overlayers in previous studies of double-layer In phases.
△ Less
Submitted 27 May, 2016;
originally announced May 2016.
-
Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment
Authors:
M. Shopova,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
G. Sultanov,
M. Rodozov,
S. Stoykova,
Y. Assran,
A. Sayed,
A. Radi,
S. Aly,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
A. Cimmino
, et al. (71 additional authors not shown)
Abstract:
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the L…
▽ More
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been upgraded with 144 newly installed RPCs on the forth forward stations. The new chambers ensure and enhance the muon trigger efficiency in the high luminosity conditions of the LHC Run2. The chambers have been successfully installed and commissioned. The system has been run successfully and experimental data has been collected and analyzed. The performance results of the newly installed RPCs will be presented.
△ Less
Submitted 22 May, 2016;
originally announced May 2016.
-
Charge Distribution Dependency on Gap Thickness of CMS Endcap RPC
Authors:
Sung K. Park,
Min Ho Kang,
Kyongsei Lee
Abstract:
We report a systematic study of charge distribution dependency of CMS Resistive Plate Chamber (RPC) on gap thickness. Prototypes of double-gap RPCs with six different gap thickness ranging from from 1.0 to 2.0 mm in 0.2-mm steps have been built with 2-mm-thick phenolic high-pressure-laminated plates. The efficiencies of the six gaps are measured as a function of the effective high voltages. We rep…
▽ More
We report a systematic study of charge distribution dependency of CMS Resistive Plate Chamber (RPC) on gap thickness. Prototypes of double-gap RPCs with six different gap thickness ranging from from 1.0 to 2.0 mm in 0.2-mm steps have been built with 2-mm-thick phenolic high-pressure-laminated plates. The efficiencies of the six gaps are measured as a function of the effective high voltages. We report that the strength of the electric fields of the gap is decreased as the gap thickness is increased. The distributions of charges in six gaps are measured. The space charge effect is seen in the charge distribution at the higher voltages. The logistic function is used to fit the charge distribution data. Smaller charges can be produced within smaller gas gap. But the digitization threshold should be also lowered to utilize these smaller charges.
△ Less
Submitted 7 May, 2016;
originally announced May 2016.
-
Atomic and electronic structure of the $\sqrt{3}$$\times$$\sqrt{3}$ silicene phase on Ag(111): density-functional calculations
Authors:
Se Gab Kwon,
Myung Ho Kang
Abstract:
Density-functional theory calculations are used to verify the atomic structure of the $\sqrt{3}$$\times$$\sqrt{3}$ silicene phase grown on the Ag(111) surface. Recent experimental studies strongly suggested that the previous double-layer silicene model should be replaced with a Ag-mixed double-layer model resembling the top layers of the Ag/Si(111)-($\sqrt{3}$$\times$$\sqrt{3}$) surface. In our ca…
▽ More
Density-functional theory calculations are used to verify the atomic structure of the $\sqrt{3}$$\times$$\sqrt{3}$ silicene phase grown on the Ag(111) surface. Recent experimental studies strongly suggested that the previous double-layer silicene model should be replaced with a Ag-mixed double-layer model resembling the top layers of the Ag/Si(111)-($\sqrt{3}$$\times$$\sqrt{3}$) surface. In our calculations, the Ag-mixed double-layer model is indeed energetically favored over the double-layer silicene model and well reproduces the reported scanning-tunneling microscopy and spectroscopy data. Especially, the structural origin of the experimental band structure is clarified as the top Ag-Si mixed layer, unlike the experimental interpretations as either a silicene layer or the Ag(111) substrate.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.
-
Hexagonal Indium Double Layer on Si(111)-($\sqrt{7}\times\sqrt{3})$
Authors:
Jae Whan Park,
Myung Ho Kang
Abstract:
Density-functional calculations are used to verify the atomic structure of the hexagonal In/Si(111)-($\sqrt{7}\times\sqrt{3}$) surface, which has been considered to represent an ultimate two-dimensional (2D) limit of metallic In overlayers. Contrary to the prevailing assumption, this surface consists of not a single layer but a double layer of In atoms, which corresponds to a hexagonal deformation…
▽ More
Density-functional calculations are used to verify the atomic structure of the hexagonal In/Si(111)-($\sqrt{7}\times\sqrt{3}$) surface, which has been considered to represent an ultimate two-dimensional (2D) limit of metallic In overlayers. Contrary to the prevailing assumption, this surface consists of not a single layer but a double layer of In atoms, which corresponds to a hexagonal deformation of the well-established $rectangular$ In double layer formed on Si(111)-($\sqrt{7}\times\sqrt{3}$) [Park $et$ $al$., Phys. Rev. Lett. 109, 166102 (2012)]. The same double-layer thickness accounts well for the typical coexistence of the hexagonal and rectangular phases and their similar 2D electronic structures. It is thus conclusive that, regardless of rectangular or hexagonal, the In/Si(111)-($\sqrt{7}\times\sqrt{3}$) surface does not represent an one-atom-thick In overlayer.
△ Less
Submitted 23 March, 2015;
originally announced March 2015.
-
RPC Gap Production and Performance for CMS RE4 Upgrade
Authors:
Sung Keun Park,
Min Ho Kang,
Kyong Sei Lee
Abstract:
CMS experiment constructed the fourth Resistive Plate Chamber (RPC) trigger station composed of 144 RPCs to enhance the high momentum muon trigger efficiency at both endcap regions. All new CMS endcap RPC gaps are produced in accordance with QA and QC at the Korea Detector Laboratory (KODEL) in Korea. All qualified gaps have been delivered to three assembly sites: CERN in Switzerland, BARC in Indi…
▽ More
CMS experiment constructed the fourth Resistive Plate Chamber (RPC) trigger station composed of 144 RPCs to enhance the high momentum muon trigger efficiency at both endcap regions. All new CMS endcap RPC gaps are produced in accordance with QA and QC at the Korea Detector Laboratory (KODEL) in Korea. All qualified gaps have been delivered to three assembly sites: CERN in Switzerland, BARC in India, and Ghent University in Belgium for the RPC detector assembly. In this paper, we present the detailed procedures used in the production of RPC gaps adopted for the CMS upgrade.
△ Less
Submitted 16 August, 2014;
originally announced August 2014.
-
Identification of the Au coverage and structure of the Au/Si(111)-5x2 surface
Authors:
Se Gab Kwon,
Myung Ho Kang
Abstract:
We identify the atomic structure of the Au/Si(111)-5x2 surface by using density functional theory calculations. With seven Au atoms per unit cell, our model forms a bona fide 5x2 atomic structure, which is energetically favored over the leading model of Erwin, Barke, and Himpsel [Phys. Rev. B 80, 155409 (2009)] and well reproduces the Y- and V-shaped 5x2 STM images. This surface is metallic with a…
▽ More
We identify the atomic structure of the Au/Si(111)-5x2 surface by using density functional theory calculations. With seven Au atoms per unit cell, our model forms a bona fide 5x2 atomic structure, which is energetically favored over the leading model of Erwin, Barke, and Himpsel [Phys. Rev. B 80, 155409 (2009)] and well reproduces the Y- and V-shaped 5x2 STM images. This surface is metallic with a prominent half-filled band of surface states, mostly localized around the Au-chain area. The correct identification of the atomic and band structure of the clean surface further clarifies the adsorption structure of Si adatoms and the physical origin of the intriguing metal-to-insulator transition driven by Si adatoms.
△ Less
Submitted 19 May, 2014;
originally announced May 2014.
-
Nearly Massless Electrons in the Silicon Interface with a Metal Film
Authors:
Keun Su Kim,
Sung Chul Jung,
Myung Ho Kang,
Han Woong Yeom
Abstract:
We demonstrate the realization of nearly massless electrons in the most widely used device material, silicon, at the interface with a metal film. Using angle-resolved photoemission, we found that the surface band of a monolayer lead film drives a hole band of the Si inversion layer formed at the interface with the film to have nearly linear dispersion with an effective mass about 20 times lighter…
▽ More
We demonstrate the realization of nearly massless electrons in the most widely used device material, silicon, at the interface with a metal film. Using angle-resolved photoemission, we found that the surface band of a monolayer lead film drives a hole band of the Si inversion layer formed at the interface with the film to have nearly linear dispersion with an effective mass about 20 times lighter than bulk Si and comparable to graphene. The reduction of mass can be accounted for by repulsive interaction between neighboring bands of the metal film and Si substrate. Our result suggests a promising way to take advantage of massless carriers in silicon-based thin-film devices, which can also be applied for various other semiconductor devices.
△ Less
Submitted 24 May, 2010;
originally announced May 2010.
