-
Light-yield response of liquid scintillators using 2--6 MeV tagged neutrons
Authors:
N. Mauritzson,
K. G. Fissum,
J. R. M. Annand,
H. Perrey,
R. Al Jebali,
A. Backis,
R. Hall-Wilton,
K. Kanaki,
V. Maulerova-Subert,
F. Messi,
R. J. W. Frost,
E. Rofors,
J. Scherzinger
Abstract:
Knowledge of the neutron light-yield response is crucial to the understanding of scintillator-based neutron detectors. In this work, neutrons from 2--6 MeV have been used to study the scintillation light-yield response of the liquid scintillators NE 213A, EJ 305, EJ 331 and EJ 321P using event-by-event waveform digitization. Energy calibration was performed using a GEANT model to locate the edge p…
▽ More
Knowledge of the neutron light-yield response is crucial to the understanding of scintillator-based neutron detectors. In this work, neutrons from 2--6 MeV have been used to study the scintillation light-yield response of the liquid scintillators NE 213A, EJ 305, EJ 331 and EJ 321P using event-by-event waveform digitization. Energy calibration was performed using a GEANT model to locate the edge positions of the Compton distributions produced by gamma-ray sources. The simulated light yield for neutrons from a PuBe source was compared to measured recoil proton distributions, where neutron energy was selected by time-of-flight. This resulted in an energy-dependent Birks parametrization to characterize the non-linear response to the lower energy neutrons. The NE 213A and EJ 305 results agree very well with existing data and are reproduced nicely by the simulation. New results for EJ 331 and EJ 321P, where the simulation also reproduces the data well, are presented.
△ Less
Submitted 24 November, 2023; v1 submitted 31 October, 2023;
originally announced November 2023.
-
Evaluation of a method for time-of-flight, wavelength and distance calibration for neutron scattering instruments by means of a mini-chopper and standard neutron monitors
Authors:
L. Vergara,
M. Arai,
R. Woracek,
M. Olsson,
A. Quintanilla,
S. Alcock,
J. Nilsson,
K. Kanaki,
P. M. Kadletz,
O. Kirstein,
R. Hall-Wilton,
N. Tsapatsaris
Abstract:
Accurate conversion of neutron time-of-flight (TOF) to wavelength, and its uncertainty, is of fundamental importance to neutron scattering measurements. Especially in cases where instruments are highly configurable, the determination of the absolute wavelength after any change must always be performed. Inspired by the manner with which neutron spectrometers determine the absolute wavelength, we ev…
▽ More
Accurate conversion of neutron time-of-flight (TOF) to wavelength, and its uncertainty, is of fundamental importance to neutron scattering measurements. Especially in cases where instruments are highly configurable, the determination of the absolute wavelength after any change must always be performed. Inspired by the manner with which neutron spectrometers determine the absolute wavelength, we evaluate for the first time, in the author's knowledge, a commonly used method for converting TOF to neutron wavelength, the distance of a monitor from the source of neutrons and we analytically calculate the uncertainty contributions that limit the precision of the conversion. The method was evaluated at the V20 test beamline at the Helmholtz Zentrum Berlin (HZB), emulating the ESS source with a pulse of 2.86 ms length and 14 Hz repetition rate, by using a mini-chopper operated at 140 Hz, beam monitors (BMs) and data acquisition infrastructure. The mini-chopper created well-defined neutron pulses and the BM was placed at two positions, enabling the average wavelength of each of the pulses created to be determined. The used experimental setup resulted in absolute wavelength determination at the monitor positions with a $δλ_{mean} / λ_{mean}$ of $\sim$1.8% for $λ>4$ Å. With a modest increase of the distance between the reference monitor positions a $δλ_{mean} / λ_{mean}$ of below 0.5% can be achieved. Further improvements are possible by using a thinner monitor, smaller chopper disc openings and a higher rotational speed chopper. The method requires only two neutron measurements and doesn't necessitate the use of crystals or complex fitting, and could constitute a suitable addition to imaging, diffraction, reflectometers and small angle neutron scattering instruments, at spallation sources, that do not normally utilise fast choppers.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
Technique for the measurement of intrinsic pulse-shape discrimination for organic scintillators using tagged neutrons
Authors:
N. Mauritzson,
K. G. Fissum,
J. R. M. Annand,
H. Perrey,
R. J. W. Frost,
R. Al Jebali,
A. Backis,
R. Hall-Wilton,
K. Kanaki,
V. Maulerova-Subert,
C. Maurer,
F. Messi,
E. Rofors
Abstract:
Fast-neutron/gamma-ray pulse-shape discrimination has been performed for the organic liquid scintillators NE 213A and EJ 305 using a time-of-flight based neutron-tagging technique and waveform digitization on an event-by-event basis. Gamma-ray sources and a Geant4-based simulation were used to calibrate the scintillation-light yield. The difference in pulse shape for the neutron and gamma-ray even…
▽ More
Fast-neutron/gamma-ray pulse-shape discrimination has been performed for the organic liquid scintillators NE 213A and EJ 305 using a time-of-flight based neutron-tagging technique and waveform digitization on an event-by-event basis. Gamma-ray sources and a Geant4-based simulation were used to calibrate the scintillation-light yield. The difference in pulse shape for the neutron and gamma-ray events was analysed by integrating selected portions of the digitized waveform to produce a figure-of-merit for neutron/gamma-ray separation. This figure-of-merit has been mapped as a function of detector threshold and also of neutron energy determined from time-of-flight. It shows clearly that the well-established pulse-shape discrimination capabilities of NE 213A are superior to those of EJ 305. The extra information provided by the neutron-tagging technique has resulted in a far more detailed assessment of the pulse-shape discrimination capabilities of these organic scintillators.
△ Less
Submitted 2 June, 2022;
originally announced June 2022.
-
Multitube monitors: a new-generation of neutron beam monitors
Authors:
F. Lafont,
D. Barkats,
J-C. Buffet,
S. Cuccaro,
B. Guerard,
C-C Lai,
J. Marchal,
J. Pentenero,
N. Sartor,
R. Hall-Wilton,
K. Kanaki,
L. Robinson,
P O. Svensson
Abstract:
With the renewal of many neutron science instruments and the commissioning of new neutron facilities, there is a rising demand for improved neutron beam monitoring systems with reduced beam perturbations and higher counting rate capability. Fission chambers are the most popular beam monitors; however, their use on some instruments may be prevented by the background generated by fast neutrons emitt…
▽ More
With the renewal of many neutron science instruments and the commissioning of new neutron facilities, there is a rising demand for improved neutron beam monitoring systems with reduced beam perturbations and higher counting rate capability. Fission chambers are the most popular beam monitors; however, their use on some instruments may be prevented by the background generated by fast neutrons emitted during neutron captures in 235U and by neutrons scattered in the material of the fission chamber. Multitube detectors, on the other hand, offer a good alternative with minimum beam perturbations. The purpose of this paper is to report and analyse the results of the measurements performed with several Multitubes used for beam monitoring. We show that the transparency of Multitube beam monitors is 97.6 +/-0.4 %, and that their detection efficiency is uniform, with a deviation from the mean value < 0.7%. A counting rate reduction of 10% due to pile-up effects is measured at a rate of 550 kHz. In addition to neutron beam intensity monitoring, the Multitube can be configured for 1-dimensional or 2-dimensional localisation. We present the preliminary results of these additional functionalities.
△ Less
Submitted 19 May, 2022; v1 submitted 3 February, 2022;
originally announced February 2022.
-
Uniformity of response of Uranium fission chambers used as neutron beam monitors
Authors:
F. Lafont,
B. Guerard,
R. Hall-Wilton,
K. Kanaki
Abstract:
Uranium fission chambers are commonly used for neutron beam monitoring in neutron research facilities. The challenges brought with the renewing or commissioning of new neutron facilities encourage to minimize the interaction between the monitor and the neutron beam. In order to characterize both their detection efficiency and transmission factor, several fission chambers, have been scanned on the…
▽ More
Uranium fission chambers are commonly used for neutron beam monitoring in neutron research facilities. The challenges brought with the renewing or commissioning of new neutron facilities encourage to minimize the interaction between the monitor and the neutron beam. In order to characterize both their detection efficiency and transmission factor, several fission chambers, have been scanned on the CT1 monochromatic beam line of the ILL. Results show that the monitor transparency, measured at the center of the monitor, varies from 90% to 96%, and that the detection efficiency varies by as much as 50% over the active area.
△ Less
Submitted 3 February, 2022; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Geant4-based calibration of an organic liquid scintillator
Authors:
N. Mauritzson,
K. G. Fissum,
H. Perrey,
J. R. M. Annand,
R. J. W. Frost,
R. Hall-Wilton,
R. Al Jebali,
K. Kanaki,
V. Maulerova,
F. Messi,
E. Rofors
Abstract:
A light-yield calibration of an NE 213A organic liquid scintillator detector has been performed using both monoenergetic and polyenergetic gamma-ray sources. Scintillation light was detected in a photomultiplier tube, and the corresponding pulses were subjected to waveform digitization on an event-by-event basis. The resulting Compton edges have been analyzed using a Geant4 simulation of the detec…
▽ More
A light-yield calibration of an NE 213A organic liquid scintillator detector has been performed using both monoenergetic and polyenergetic gamma-ray sources. Scintillation light was detected in a photomultiplier tube, and the corresponding pulses were subjected to waveform digitization on an event-by-event basis. The resulting Compton edges have been analyzed using a Geant4 simulation of the detector which models both the interactions of the ionizing radiation as well as the transport of scintillation photons. The simulation is calibrated and also compared to well-established prescriptions used to determine the Compton edges, resulting ultimately in light-yield calibration functions. In the process, the simulation-based method produced information on the gain and intrinsic pulse-height resolution of the detector. It also facilitated a previously inaccessible understanding of the systematic uncertainties associated with the calibration of the scintillation-light yield. The simulation-based method was also compared to well-established numerical prescriptions for locating the Compton edges. Ultimately, the simulation predicted as much as 17% lower light-yield calibrations than the prescriptions. These calibrations indicate that approximately 35% of the scintillation light associated with a given gamma-ray reaches the photocathode. It is remarkable how well two 50 year old prescriptions for calibrating scintillation-light yield in organic scintillators have stood the test of time.
△ Less
Submitted 22 October, 2021; v1 submitted 24 September, 2021;
originally announced September 2021.
-
Self-Shielding Copper Substrate Neutron Supermirror Guides
Authors:
P. M. Bentley,
R. Hall-Wilton,
C. P. Cooper-Jensen,
N. Cherkashyna,
K. Kanaki,
C. Schanzer,
M. Schneider,
P. Boeni
Abstract:
The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whil…
▽ More
The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whilst the activation of copper is initially higher than for other material options, for the full energy spectrum, many of the isotopes are short-lived, so that for realistic maintenance access times the radiation dose to workers is expected to be lower than steel and in the lowest zoning category for radiation safety outside the spallation target monolith. There is no impact on neutron reflectivity performance relative to established alternatives, and the manufacturing cost is similar to other polished metal substrates.
△ Less
Submitted 16 April, 2021; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Simulation of the Response of the Solid State Neutron Detector for the European Spallation Source
Authors:
L. Boyd,
E. Rofors,
J. R. M. Annand,
K. G. Fissum,
R. Hall-Wilton,
R. Al Jebali,
K. Kanaki,
K. Livingston,
V. Maulerova,
N. Mauritzson,
R. Montgomery,
H. Perrey,
B. Seitz
Abstract:
The characteristics of the Solid-state Neutron Detector, under development for neutron-scattering measurements at the European Spallation Source, have been simulated with a Geant4-based computer code. The code models the interations of thermal neutrons and ionising radiation in the 6Li-doped scintillating glass of the detector, the production of scintillation light and the transport of optical, sc…
▽ More
The characteristics of the Solid-state Neutron Detector, under development for neutron-scattering measurements at the European Spallation Source, have been simulated with a Geant4-based computer code. The code models the interations of thermal neutrons and ionising radiation in the 6Li-doped scintillating glass of the detector, the production of scintillation light and the transport of optical, scintillation photons through the the scintillator, en route to the photo-cathode of the attached multi-anode photomultiplier. Factors which affect the optical-photon transport, such as surface finish, pixelation of the glass sheet, provision of a front reflector and optical coupling media are compared. Predictions of the detector response are compared with measurements made with neutron and gamma-ray sources, a collimated alpha source and finely collimated beams of 2.5 MeV protons and deuterons.
△ Less
Submitted 11 March, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
Response of a Li-glass/multi-anode photomultiplier detector to collimated thermal-neutron beams
Authors:
E. Rofors,
N. Mauritzson,
H. Perrey,
R. Al Jebali,
J. R. M. Annand,
L. Boyd,
M. J. Christensen,
U. Clemens,
S. Desert,
R. Engels,
K. G. Fissum,
H. Frielinghaus,
C. Gheorghe,
R. Hall-Wilton,
S. Jaksch,
K. Kanaki,
S. Kazi,
G. Kemmerling,
I. Llamas Jansa,
V. Maulerova,
R. Montgomery,
T. Richter,
J. Scherzinger,
B. Seitz,
M. Shetty
Abstract:
The response of a position-sensitive Li-glass scintillator detector being developed for thermal-neutron detection with 6 mm position resolution has been investigated using collimated beams of thermal neutrons. The detector was moved perpendicularly through the neutron beams in 0.5 to 1.0 mm horizontal and vertical steps. Scintillation was detected in an 8 X 8 pixel multi-anode photomultiplier tube…
▽ More
The response of a position-sensitive Li-glass scintillator detector being developed for thermal-neutron detection with 6 mm position resolution has been investigated using collimated beams of thermal neutrons. The detector was moved perpendicularly through the neutron beams in 0.5 to 1.0 mm horizontal and vertical steps. Scintillation was detected in an 8 X 8 pixel multi-anode photomultiplier tube on an event-by-event basis. In general, several pixels registered large signals at each neutron-beam location. The number of pixels registering signal above a set threshold was investigated, with the maximization of the single-hit efficiency over the largest possible area of the detector as the primary goal. At a threshold of ~50% of the mean of the full-deposition peak, ~80% of the events were registered in a single pixel, resulting in an effective position resolution of ~5 mm in X and Y. Lower thresholds generally resulted in events demonstrating higher pixel multiplicities, but these events could also be localized with ~5 mm position resolution.
△ Less
Submitted 9 December, 2020; v1 submitted 13 October, 2020;
originally announced October 2020.
-
New high-sensitivity searches for neutrons converting into antineutrons and/or sterile neutrons at the European Spallation Source
Authors:
A. Addazi,
K. Anderson,
S. Ansell,
K. Babu,
J. Barrow,
D. V. Baxter,
P. M. Bentley,
Z. Berezhiani,
R. Bevilacqua,
C. Bohm,
G. Brooijmans,
J. Broussard,
R. Biondi,
B. Dev,
C. Crawford,
A. Dolgov,
K. Dunne,
P. Fierlinger,
M. R. Fitzsimmons,
A. Fomin,
M. Frost,
S. Gardner,
A. Galindo-Uribarri,
E. Golubeva,
S. Girmohanta
, et al. (70 additional authors not shown)
Abstract:
The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon numbe…
▽ More
The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon number violation. The program will include high-sensitivity searches for processes that violate baryon number by one or two units: free neutron-antineutron oscillation ($n\rightarrow \bar{n}$) via mixing, neutron-antineutron oscillation via regeneration from a sterile neutron state ($n\rightarrow [n',\bar{n}'] \rightarrow \bar{n}$), and neutron disappearance ($n\rightarrow n'$); the effective $Δ\mathcal{B}=0$ process of neutron regeneration ($n\rightarrow [n',\bar{n}'] \rightarrow n$) is also possible. The program can be used to discover and characterise mixing in the neutron, antineutron, and sterile neutron sectors. The experiment addresses topical open questions such as the origins of baryogenesis, the nature of dark matter, and is sensitive to scales of new physics substantially in excess of those available at colliders. A goal of the program is to open a discovery window to neutron conversion probabilities (sensitivities) by up to three orders of magnitude compared with previous searches. The opportunity to make such a leap in sensitivity tests should not be squandered. The experiment pulls together a diverse international team of physicists from the particle (collider and low energy) and nuclear physics communities, while also including specialists in neutronics and magnetics.
△ Less
Submitted 8 June, 2020;
originally announced June 2020.
-
Time- and energy-resolved effects in the boron-10 based Multi-Grid and helium-3 based thermal neutron detectors
Authors:
A. Backis,
A. Khaplanov,
R. Al Jebali,
R. Ammer,
I. Apostolidis,
J. Birch,
C. -C. Lai,
P. P. Deen,
M. Etxegarai,
N. de Ruette,
J. Freita Ramos,
D. F. Förster,
E. Haettner,
R. Hall-Wilton,
D. Hamilton,
C. Höglund,
P. M. Kadletz,
K. Kanaki,
E. Karnickis,
O. Kirstein,
S. Kolya,
Z. Kraujalyte,
A. Laloni,
K. Livingston,
O. Löhman
, et al. (11 additional authors not shown)
Abstract:
The boron-10 based Multi-Grid detector is being developed as an alternative to helium-3 based neutron detectors. At the European Spallation Source, the detector will be used for time-of-flight neutron spectroscopy at cold to thermal neutron energies. The objective of this work is to investigate fine time- and energy-resolved effects of the Multi-Grid detector, down to a few $μ$eV, while comparing…
▽ More
The boron-10 based Multi-Grid detector is being developed as an alternative to helium-3 based neutron detectors. At the European Spallation Source, the detector will be used for time-of-flight neutron spectroscopy at cold to thermal neutron energies. The objective of this work is to investigate fine time- and energy-resolved effects of the Multi-Grid detector, down to a few $μ$eV, while comparing it to the performance of a typical helium-3 tube. Furthermore, it is to characterize differences between the detector technologies in terms of internal scattering, as well as the time reconstruction of ~ $μ$s short neutron pulses. The data were taken at the Helmholtz Zentrum Berlin, where the Multi-Grid detector and a helium-3 tube were installed at the ESS test beamline, V20. Using a Fermi-chopper, the neutron beam of the reactor was chopped into a few tens of $μ$s wide pulses before reaching the detector, located a few tens of cm downstream. The data of the measurements show an agreement between the derived and calculated neutron detection efficiency curve. The data also provide fine details on the effect of internal scattering, and how it can be reduced. For the first time, the chopper resolution was comparable to the timing resolution of the Multi-Grid detector. This allowed a detailed study of time- and energy resolved effects, as well as a comparison with a typical helium-3 tube.
△ Less
Submitted 14 January, 2021; v1 submitted 2 June, 2020;
originally announced June 2020.
-
Response of a Li-glass/multi-anode photomultiplier detector to focused proton and deuteron beams
Authors:
E. Rofors,
J. Pallon,
R. Al Jebali,
J. R. M. Annand,
L. Boyd,
M. J. Christensen,
U. Clemens,
S. Desert,
M. Elfman,
R. Engels,
K. G. Fissum,
H. Frielinghaus,
R. Frost,
S. Gardner,
C. Gheorghe,
R. Hall-Wilton,
S. Jaksch,
K. Kanaki,
G. Kemmerling,
P. Kristiansson,
K. Livingston,
V. Maulerova,
N. Mauritzson,
R. Montgomery,
H. Perrey
, et al. (4 additional authors not shown)
Abstract:
The response of a position-sensitive Li-glass based scintillation detector to focused beams of 2.5 MeV protons and deuterons has been investigated. The beams were scanned across the detector in 0.5 mm horizontal and vertical steps perpendicular to the beams. Scintillation light was registered using an 8 by 8 pixel multi-anode photomultiplier tube. The signal amplitudes were recorded for each pixel…
▽ More
The response of a position-sensitive Li-glass based scintillation detector to focused beams of 2.5 MeV protons and deuterons has been investigated. The beams were scanned across the detector in 0.5 mm horizontal and vertical steps perpendicular to the beams. Scintillation light was registered using an 8 by 8 pixel multi-anode photomultiplier tube. The signal amplitudes were recorded for each pixel on an event-by-event basis. Several pixels generally registered considerable signals at each beam location. The number of pixels above set thresholds were investigated, with the optimization of the single-hit efficiency over the largest possible area as the goal. For both beams, at a threshold of ~50% of the mean of the full-deposition peak, ~80% of the events were registered in a single pixel, resulting in an effective position resolution of ~5 mm in X and Y.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Parasitic neutron beam monitoring: proof of concept on gamma monitoring of neutron chopper phases
Authors:
F. Issa,
R. Hall-Wilton,
A. Quintanilla,
M. Olsson,
D. Zielinski,
K. Kanaki,
N. Tsapatsaris
Abstract:
Neutron beam monitors are an essential diagnostic component of neutron scattering facilities. They are used to measure neutron flux, calibrating experiments performed on the instruments, allowing measurement of facility performance, understanding of the effect on the neutrons of beam-line components (such as choppers), calibration of detectors and tracking of beam stability. Ideally beam monitors…
▽ More
Neutron beam monitors are an essential diagnostic component of neutron scattering facilities. They are used to measure neutron flux, calibrating experiments performed on the instruments, allowing measurement of facility performance, understanding of the effect on the neutrons of beam-line components (such as choppers), calibration of detectors and tracking of beam stability. Ideally beam monitors {should} not perturb the beam. Previous work shows commercial beam monitors attenuate the beam by a few percent in the worst case due to the 1-2 mm thick Aluminium entrance and exit windows and the material inside. Parasitic methods of neutron beam diagnostics, where there is no beam monitor directly in the beam, would be preferable. This paper presents the concept of a parasitic method of monitoring the beam which can be used for neutron chopper phasing. This is achieved by placing a gamma detector close to a rotating chopper and measures a signal proportional to the flux absorbed by the chopper. Neutrons interact with the Boron absorber on the chopper disc lead to gamma emission at 480 keV. Detection of these gamma rays is used to determine the chopper phasing and timing. Potentially information on the flux of the beamline can be extracted. Results from a proof of concept implementation show that diagnosis of neutron chopper phases is feasible.
△ Less
Submitted 11 November, 2020; v1 submitted 15 April, 2020;
originally announced April 2020.
-
A simulational study of the indirect geometry neutron spectrometer, BIFROST at the European Spallation Source, from neutron source position to detector position
Authors:
M. Klausz,
K. Kanaki,
T. Kittelmann,
R. Toft-Petersen,
J. O. Birk,
M. A. Olsen,
P. Zagyvai,
R. J. Hall-Wilton
Abstract:
The European Spallation Source (ESS) is intended to become the most powerful spallation neutron source in the world and the flagship of neutron science in the upcoming decades. The exceptionally high neutron flux will provide unique opportunities for scientific experiments, but also set high requirements for the detectors. One of the most challenging aspects is the rate capability and in particula…
▽ More
The European Spallation Source (ESS) is intended to become the most powerful spallation neutron source in the world and the flagship of neutron science in the upcoming decades. The exceptionally high neutron flux will provide unique opportunities for scientific experiments, but also set high requirements for the detectors. One of the most challenging aspects is the rate capability and in particular the peak instantaneous rate capability, i.e. the number of neutrons hitting the detector per channel or cm$^2$ at the peak of the neutron pulse. The primary purpose of this paper is to estimate the incident rates that are anticipated for the BIFROST instrument planned for ESS, and also to demonstrate the use of powerful simulation tools for the correct interpretation of neutron transport in crystalline materials. A full simulation model of the instrument from source to detector position, implemented with the use of multiple simulation software packages is presented. For a single detector tube instantaneous incident rates with a maximum of 1.7 GHz for a Bragg peak from a single crystal, and 0.3 MHz for a vanadium sample are found. This paper also includes the first application of a new pyrolytic graphite model, and a comparison of different simulation tools to highlight their strengths and weaknesses.
△ Less
Submitted 9 November, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
Vanadium-based neutron Beam Monitor
Authors:
Vendula Maulerova,
Kalliopi Kanaki,
Peter Kadletz,
Robin Woracek,
Thomas Wilpert,
Kevin Fissum,
Alessio Laloni,
Nicholai Mauritzson,
Fatima Issa,
Richard Hall-Wilton
Abstract:
A prototype quasi-parasitic thermal neutron beam monitor based on isotropic neutron scattering from a thin natural vanadium foil and standard $^3$He proportional counters is conceptualized, designed, simulated, calibrated, and commissioned. The European Spallation Source designed to deliver the highest integrated neutron flux originating from a pulsed source is currently under construction in Lund…
▽ More
A prototype quasi-parasitic thermal neutron beam monitor based on isotropic neutron scattering from a thin natural vanadium foil and standard $^3$He proportional counters is conceptualized, designed, simulated, calibrated, and commissioned. The European Spallation Source designed to deliver the highest integrated neutron flux originating from a pulsed source is currently under construction in Lund, Sweden. The effort to investigate a vanadium-based neutron beam monitor was triggered by a list of requirements for Beam Monitors permanently placed in the ESS neutron beams in order to provide reliable monitoring at complex beamlines: low attenuation, linear response over a wide range of neutron fluxes, near to constant efficiency for neutron wavelengths in a range of 0.6-10 Å, calibration stability and the possibility to place the system in vacuum are all desirable characteristics. The scattering-based prototype, employing a natural vanadium foil and standard $^3$He proportional counters, was investigated at the V17 and V20 neutron beamlines of the Helmholtz-Zentrum in Berlin, Germany, in several different geometrical configurations of the $^3$He proportional counters around the foil. Response linearity is successfully demonstrated for foil thicknesses ranging from 0.04 mm to 3.15 mm. Attenuation lower than 1% for thermal neutrons is demonstrated for the 0.04 mm and 0.125 mm foils. The geometries used for the experiment were simulated allowing for absolute flux calibration and establishing the possible range of efficiencies for various designs of the prototype. The operational flux limits for the beam monitor prototype were established as a dependency of the background radiation and prototype geometry. The herein demonstrated prototype monitors can be employed for neutron fluxes ranging from $10^3-10^{10}$ n/s/cm$^2$.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Performance evaluation of the Boron Coated Straws detector with Geant4
Authors:
M. Klausz,
K. Kanaki,
P. Zagyvai,
R. J. Hall-Wilton
Abstract:
The last decade has witnessed the development of several alternative neutron detector technologies, as a consequence of upcoming neutron sources and upgrades, as well the world-wide shortage of $^3$He. One branch of development is the family of $^{10}$B-based gaseous detectors. This work focuses on the boron coated straws (BCS) by Proportional Technologies Inc., a commercial solution designed for…
▽ More
The last decade has witnessed the development of several alternative neutron detector technologies, as a consequence of upcoming neutron sources and upgrades, as well the world-wide shortage of $^3$He. One branch of development is the family of $^{10}$B-based gaseous detectors. This work focuses on the boron coated straws (BCS) by Proportional Technologies Inc., a commercial solution designed for use in homeland security and neutron science. A detailed Geant4 simulation study of the BCS is presented, which investigates various aspects of the detector performance, e.g. efficiency, activation, absorption and the impact of scattering on the measured signal. The suitability of the BCS detector for Small Angle Neutron Scattering (SANS), direct chopper spectrometry and imaging is discussed.
△ Less
Submitted 8 July, 2019; v1 submitted 10 April, 2019;
originally announced April 2019.
-
Evidence of fast neutron sensitivity for 3He detectors and comparison with Boron-10 based neutron detectors
Authors:
Giacomo Mauri,
Francesco Messi,
Kalliopi Kanaki,
Richard Hall-Wilton,
Francesco Piscitelli
Abstract:
The 3He-based neutron detectors are no longer the default solution for neutron scattering applications. Both the inability of fulfilling the requirements in performance, needed for the new instruments, and the shortage of 3He, drove a series of research programs aiming to find new technologies for neutron detection. The characteristics of the new detector technologies have been extensively tested…
▽ More
The 3He-based neutron detectors are no longer the default solution for neutron scattering applications. Both the inability of fulfilling the requirements in performance, needed for the new instruments, and the shortage of 3He, drove a series of research programs aiming to find new technologies for neutron detection. The characteristics of the new detector technologies have been extensively tested to prove their effectiveness with respect to the state-of-the-art technology. Among these, the background rejection capability is crucial to determine. The signal-to-background ratio is strongly related to the performance figure-of-merit for most instruments. These are designed to exploit the high flux expected from the new high intensity neutron sources. Therefore, an inadequate background rejection could significantly affect the measurements, leading to detector saturation and misleading events. This is of particular importance for the kind of techniques in which the signals are rather weak. For the first time, the sensitivity of 3He detectors to fast neutrons, up to En = 10 MeV, has been estimated. Two independent measurements are presented: a direct calculation based on a subtraction method used to disentangle the thermal and the fast neutron contribution, while a further evidence is calculated indirectly through a comparison with the recently published data from a 10B-based detector. Both investigations give a characterization on the order of magnitude for the sensitivity. A set of simulations is presented as well in order to support and to validate the results of the measurements. A sensitivity of 4x10-3 is observed from the data. This is two orders of magnitude higher than that previously observed in 10B-based detectors.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Response of a Li-glass/multi-anode photomultiplier detector to $α$-particles from $^{241}$Am
Authors:
E. Rofors,
H. Perrey,
R. Al Jebali,
J. R. M. Annand,
L. Boyd,
U. Clemens,
S. Desert,
R. Engels,
K. G. Fissum,
H. Frielinghaus,
C. Gheorghe,
R. Hall-Wilton,
S. Jaksch,
A. Jalgén,
K. Kanaki,
G. Kemmerling,
V. Maulerova,
N. Mauritzson,
R. Montgomery,
J. Scherzinger,
B. Seitz
Abstract:
The response of a position-sensitive Li-glass scintillator detector to $α$-particles from a collimated $^{241}$Am source scanned across the face of the detector has been measured. Scintillation light was read out by an 8 X 8 pixel multi-anode photomultiplier and the signal amplitude for each pixel has been recorded for every position on a scan. The pixel signal is strongly dependent on position an…
▽ More
The response of a position-sensitive Li-glass scintillator detector to $α$-particles from a collimated $^{241}$Am source scanned across the face of the detector has been measured. Scintillation light was read out by an 8 X 8 pixel multi-anode photomultiplier and the signal amplitude for each pixel has been recorded for every position on a scan. The pixel signal is strongly dependent on position and in general several pixels will register a signal (a hit) above a given threshold. The effect of this threshold on hit multiplicity is studied, with a view to optimize the single-hit efficiency of the detector.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
Suppression of intrinsic neutron background in the Multi-Grid detector
Authors:
E. Dian,
K. Kanaki,
A. Khaplanov,
T. Kittelmann,
P. Zagyvai,
R. Hall-Wilton
Abstract:
One of the key requirements for neutron scattering instruments is the Signal-to-Background ratio (SBR). This is as well a design driving requirement for many instruments at the European Spallation Source (ESS), which aspires to be the brightest neutron source of the world. The SBR can be effectively improved with background reduction. The Multi-Grid, a large-area thermal neutron detector with a so…
▽ More
One of the key requirements for neutron scattering instruments is the Signal-to-Background ratio (SBR). This is as well a design driving requirement for many instruments at the European Spallation Source (ESS), which aspires to be the brightest neutron source of the world. The SBR can be effectively improved with background reduction. The Multi-Grid, a large-area thermal neutron detector with a solid boron carbide converter, is a novel solution for chopper spectrometers. This detector will be installed for the three prospective chopper spectrometers at the ESS. As the Multi-Grid detector is a large area detector with a complex structure, its intrinsic background and its suppression via advanced shielding design should be investigated in its complexity, as it cannot be naively calculated. The intrinsic scattered neutron background and its effect on the SBR is determined via a detailed Monte Carlo simulation for the Multi-Grid detector module, designed for the CSPEC instrument at the ESS. The impact of the detector vessel and the neutron entrance window on scattering is determined, revealing the importance of an optimised internal detector shielding. The background-reducing capacity of common shielding geometries, like side-shielding and end-shielding is determined by using perfect absorber as shielding material, and common shielding materials, like B$_{4}$C and Cd are also tested. On the basis of the comparison of the effectiveness of the different shielding topologies and materials, recommendations are given for a combined shielding of the Multi-Grid detector module, optimised for increased SBR.
△ Less
Submitted 2 December, 2018; v1 submitted 19 October, 2018;
originally announced October 2018.
-
Investigation of neutron scattering in the Multi-Blade detector with Geant4 simulations
Authors:
Gabor Galgoczi,
Kalliopi Kanaki,
Francesco Piscitelli,
Thomas Kittelmann,
Dezso Varga,
Richard Hall-Wilton
Abstract:
The European Spallation Source (ESS) is the world's next generation spallation-based neutron source. The research conducted at ESS will yield in the discovery and development of new materials including the fields of manufacturing, pharmaceuticals, aerospace, engines, plastics, energy, telecommunications, transportation, information technology and biotechnology. The spallation source will deliver a…
▽ More
The European Spallation Source (ESS) is the world's next generation spallation-based neutron source. The research conducted at ESS will yield in the discovery and development of new materials including the fields of manufacturing, pharmaceuticals, aerospace, engines, plastics, energy, telecommunications, transportation, information technology and biotechnology. The spallation source will deliver an unprecedented neutron flux. In particular, the reflectometers selected for construction, ESTIA and FREIA, have to fulfill challenging requirements. Local incident peak rate can reach 10$^5$~Hz/mm$^2$. For new science to be addressed, the spatial resolution is aimed to be less than 1 mm with a desired scattering of 10$^{-4}$ (peak-to-tail ratio). The latter requirement is approximately two orders of magnitude better than the current state-of-the-art detectors. The main aim of this work is to quantify the cumulative contribution of various detector components to the scattering of neutrons and to prove that the respective effect is within the requirements set for the Multi-Blade detector by the ESS reflectometers. To this end, different sets of geometry and beam parameters are investigated, with primary focus on the cathode coating and the detector window thickness.
△ Less
Submitted 27 November, 2018; v1 submitted 15 October, 2018;
originally announced October 2018.
-
Detector rates for the Small Angle Neutron Scattering instruments at the European Spallation Source
Authors:
Kalliopi Kanaki,
Milan Klausz,
Thomas Kittelmann,
Giorgia Albani,
Enrico Perelli Cippo,
Andrew Jackson,
Sebastian Jaksch,
Torben Nielsen,
Peter Zagyvai,
Richard Hall-Wilton
Abstract:
Building the European Spallation Source (ESS), the most powerful neutron source in the world, requires significant technological advances at most fronts of instrument component design. Detectors are not an exception. The existing implementations at current neutron scattering facilities are at their performance limits and sometimes barely cover the scientific needs. At full operation the ESS will y…
▽ More
Building the European Spallation Source (ESS), the most powerful neutron source in the world, requires significant technological advances at most fronts of instrument component design. Detectors are not an exception. The existing implementations at current neutron scattering facilities are at their performance limits and sometimes barely cover the scientific needs. At full operation the ESS will yield unprecedented neutron brilliance. This means that one of the most challenging aspects for the new detector designs is the increased rate capability and in particular the peak instantaneous rate capability, i.e.\,the number of neutrons hitting the detector per channel, pixel or cm$^2$ at the peak of the neutron pulse. This paper focuses on estimating the incident and detection rates that are anticipated for the Small Angle Neutron Scattering (SANS) instruments planned for ESS. Various approaches are applied and the results thereof are presented.
△ Less
Submitted 9 July, 2018; v1 submitted 31 May, 2018;
originally announced May 2018.
-
DECal, a Python tool for the efficiency calculation of thermal neutron detectors based on thin-film converters
Authors:
Álvaro Carmona Basañez,
Kalliopi Kanaki,
Francesco Piscitelli
Abstract:
The Detector Efficiency Calculator (DECal) is a series of Python functions and tools designed to analytically calculate, visualise and optimise the detection efficiency of thermal neutron detectors, which are based on thin-film converters. The implementation presented in this article concerns 10B-based detectors in particular. The code can be run via a graphical user interface, as well as via the…
▽ More
The Detector Efficiency Calculator (DECal) is a series of Python functions and tools designed to analytically calculate, visualise and optimise the detection efficiency of thermal neutron detectors, which are based on thin-film converters. The implementation presented in this article concerns 10B-based detectors in particular. The code can be run via a graphical user interface, as well as via the command line. The source code is openly available to interested users via a GitHub repository.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Scattered neutron background in thermal neutron detectors
Authors:
E. Dian,
K. Kanaki,
G. Ehlers,
R. J. Hall-Wilton,
A. Khaplanov,
T. Kittelmann,
P. Zagyvai
Abstract:
Inelastic neutron scattering instruments require very low background; therefore the proper shielding for suppressing the scattered neutron background, both from elastic and inelastic scattering is essential. The detailed understanding of the background scattering sources is required for effective suppression. The Multi-Grid thermal neutron detector is an Ar/CO$_{2}$ gas filled detector with a…
▽ More
Inelastic neutron scattering instruments require very low background; therefore the proper shielding for suppressing the scattered neutron background, both from elastic and inelastic scattering is essential. The detailed understanding of the background scattering sources is required for effective suppression. The Multi-Grid thermal neutron detector is an Ar/CO$_{2}$ gas filled detector with a $^{10}$B$_{4}$C neutron converter coated on aluminium substrates. It is a large-area detector design that will equip inelastic neutron spectrometers at the European Spallation Source (ESS). To this end a parameterised Geant4 model is built for the Multi-Grid detector. This is the first time thermal neutron scattering background sources have been modelled in a detailed simulation of detector response. The model is validated via comparison with measured data of prototypes installed on the IN6 instrument at ILL and on the CNCS instrument at SNS. The effect of scattering originating in detector components is smaller than effects originating elsewhere.
△ Less
Submitted 25 May, 2018; v1 submitted 17 January, 2018;
originally announced January 2018.
-
Fast neutron sensitivity of neutron detectors based on boron-10 converter layers
Authors:
G. Mauri,
F. Messi,
K. Kanaki,
R. Hall-Wilton,
E. Karnickis,
A. Khaplanov,
F. Piscitelli
Abstract:
In the last few years many detector technologies for thermal neutron detection have been developed in order to face the shortage of 3He, which is now much less available and more expensive. Moreover the 3He-based detectors can not fulfil the requirements in performance, e.g. the spatial resolution and the counting rate capability needed for the new instruments. The Boron-10-based gaseous detectors…
▽ More
In the last few years many detector technologies for thermal neutron detection have been developed in order to face the shortage of 3He, which is now much less available and more expensive. Moreover the 3He-based detectors can not fulfil the requirements in performance, e.g. the spatial resolution and the counting rate capability needed for the new instruments. The Boron-10-based gaseous detectors have been proposed as a suitable choice. This and other alternatives technologies are being developed at ESS. Higher intensities mean higher signals but higher background as well. The signal-to-background ratio is an important feature to study, in particular the gamma-ray and the fast neutron contributions. This paper investigates, for the first time, the fast neutrons sensitivity of 10B-based thermal neutron detector. It presents the study of the detector response as a function of energy threshold and the underlying physical mechanisms. The latter are explained with the help of theoretical considerations and simulations.
△ Less
Submitted 15 December, 2017;
originally announced December 2017.
-
The neutron tagging facility at Lund University
Authors:
F. Messi,
H. Perrey,
K. Fissum,
M. Akkawi,
R. Al Jebali,
J. R. M. Annand,
P. Bentley,
L. Boyd,
C. P. Cooper-Jensen,
D. D. DiJulio,
J. Freita-Ramos,
R. Hall-Wilton,
A. Huusko,
T. Ilves,
F. Issa,
A. Jalgén,
K. Kanaki,
E. Karnickis,
A. Khaplanov,
S. Koufigar,
V. Maulerova,
G. Mauri,
N. Mauritzson,
W. Pei,
F. Piscitelli
, et al. (5 additional authors not shown)
Abstract:
Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation p…
▽ More
Over the last decades, the field of thermal neutron detection has overwhelmingly employed He-3-based technologies. The He-3 crisis together with the forthcoming establishment of the European Spallation Source have necessitated the development of new technologies for neutron detection. Today, several promising He-3-free candidates are under detailed study and need to be validated. This validation process is in general long and expensive. The study of detector prototypes using neutron-emitting radioactive sources is a cost-effective solution, especially for preliminary investigations. That said, neutron-emitting sources have the general disadvantage of broad, structured, emitted-neutron energy ranges. Further, the emitted neutrons often compete with unwanted backgrounds of gamma-rays, alpha-particles, and fission-fragments. By blending experimental infrastructure such as shielding to provide particle beams with neutron-detection techniques such as tagging, disadvantages may be converted into advantages. In particular, a technique known as tagging involves exploiting the mixed-field generally associated with a neutron-emitting source to determine neutron time-of-flight and thus energy on an event-by-event basis. This allows for the definition of low-cost, precision neutron beams. The Source-Testing Facility, located at Lund University in Sweden and operated by the SONNIG Group of the Division of Nuclear Physics, was developed for just such low-cost studies. Precision tagged-neutron beams derived from radioactive sources are available around-the-clock for advanced detector diagnostic studies. Neutron measurements performed at the Source Testing Facility are thus cost-effective and have a very low barrier for entry. In this paper, we present an overview of the project.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Simulation Tools for Detector and Instrument Design
Authors:
Kalliopi Kanaki,
Thomas Kittelmann,
Xiao Xiao Cai,
Esben Klinkby,
Erik B. Knudsen,
Peter Willendrup,
Richard Hall-Wilton
Abstract:
The high performance requirements at the European Spallation Source have been driving the technological advances on the neutron detector front. Now more than ever is it important to optimize the design of detectors and instruments, to fully exploit the ESS source brilliance. Most of the simulation tools the neutron scattering community has at their disposal target the instrument optimization until…
▽ More
The high performance requirements at the European Spallation Source have been driving the technological advances on the neutron detector front. Now more than ever is it important to optimize the design of detectors and instruments, to fully exploit the ESS source brilliance. Most of the simulation tools the neutron scattering community has at their disposal target the instrument optimization until the sample position, with little focus on detectors. The ESS Detector Group has extended the capabilities of existing detector simulation tools to bridge this gap. An extensive software framework has been developed, enabling efficient and collaborative developments of required simulations and analyses -- based on the use of the Geant4 Monte Carlo toolkit, but with extended physics capabilities where relevant (like for Bragg diffraction of thermal neutrons in crystals). Furthermore, the MCPL (Monte Carlo Particle Lists) particle data exchange file format, currently supported for the primary Monte Carlo tools of the community (McStas, Geant4 and MCNP), facilitates the integration of detector simulations with existing simulations of instruments using these software packages. These means offer a powerful set of tools to tailor the detector and instrument design to the instrument application.
△ Less
Submitted 7 August, 2017;
originally announced August 2017.
-
Neutron activation and prompt gamma intensity in Ar/CO$_{2}$-filled neutron detectors at the European Spallation Source
Authors:
E. Dian,
K. Kanaki,
R. J. Hall-Wilton,
P. Zagyvai,
Sz. Czifrus
Abstract:
Monte Carlo simulations using MCNP6.1 were performed to study the effect of neutron activation in Ar/CO$_{2}$ neutron detector counting gas. A general MCNP model was built and validated with simple analytical calculations. Simulations and calculations agree that only the $^{40}$Ar activation can have a considerable effect. It was shown that neither the prompt gamma intensity from the $^{40}$Ar neu…
▽ More
Monte Carlo simulations using MCNP6.1 were performed to study the effect of neutron activation in Ar/CO$_{2}$ neutron detector counting gas. A general MCNP model was built and validated with simple analytical calculations. Simulations and calculations agree that only the $^{40}$Ar activation can have a considerable effect. It was shown that neither the prompt gamma intensity from the $^{40}$Ar neutron capture nor the produced $^{41}$Ar activity have an impact in terms of gamma dose rate around the detector and background level.
△ Less
Submitted 16 June, 2017; v1 submitted 27 January, 2017;
originally announced January 2017.
-
A stochastic process approach to multilayer neutron detectors
Authors:
Dragi Anevski,
Richard Hall-Wilton,
Kalliopi Kanaki,
Vladimir Pastukhov
Abstract:
The sparsity of the isotope Helium-3, ongoing since 2009, has initiated a new generation of neutron detectors. One particularly promising development line for detectors is the multilayer gaseous detector. In this paper, a stochastic process approach is used to determine the neutron's energy from the additional data afforded by the multilayer nature of these novel detectors.
The data from a multi…
▽ More
The sparsity of the isotope Helium-3, ongoing since 2009, has initiated a new generation of neutron detectors. One particularly promising development line for detectors is the multilayer gaseous detector. In this paper, a stochastic process approach is used to determine the neutron's energy from the additional data afforded by the multilayer nature of these novel detectors.
The data from a multi-layer detector consists of counts of the number of absorbed neutrons along the sequence of the detector's layers, in which the neutron absorption probability is unknown. We study the Maximum Likelihood estimator for the intensity and absorption probability, show its consistency and asymptotic normality, as the experiment time (or the number of incoming neutrons) goes to infinity. We combine these results with known results on the relation between the absorption probability and the wavelength to derive an estimator of the wavelength and to show consistency and asymptotic normality for the estimator.
△ Less
Submitted 7 November, 2018; v1 submitted 6 December, 2016;
originally announced December 2016.
-
Monte Carlo Particle Lists: MCPL
Authors:
Thomas Kittelmann,
Esben Klinkby,
Erik B Knudsen,
Peter Willendrup,
Xiao Xiao Cai,
Kalliopi Kanaki
Abstract:
A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular simulation packages.
A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular simulation packages.
△ Less
Submitted 30 March, 2017; v1 submitted 9 September, 2016;
originally announced September 2016.
-
The light-yield response of a NE-213 liquid-scintillator detector measured using 2 -- 6 MeV tagged neutrons
Authors:
J. Scherzinger,
R. Al Jebali,
J. R. M. Annand,
K. G. Fissum,
R. Hall-Wilton,
K. Kanaki,
M. Lundin,
B. Nilsson,
H. Perrey,
A. Rosborg,
H. Svensson
Abstract:
The response of a NE-213 liquid-scintillator detector has been measured using tagged neutrons from 2--6 MeV originating from an Am/Be neutron source. The neutron energies were determined using the time-of-flight technique. Pulse-shape discrimination was employed to discern between gamma-rays and neutrons. The behavior of both the fast (35 ns) and the combined fast and slow (475 ns) components of t…
▽ More
The response of a NE-213 liquid-scintillator detector has been measured using tagged neutrons from 2--6 MeV originating from an Am/Be neutron source. The neutron energies were determined using the time-of-flight technique. Pulse-shape discrimination was employed to discern between gamma-rays and neutrons. The behavior of both the fast (35 ns) and the combined fast and slow (475 ns) components of the neutron scintillation-light pulses were studied. Three different prescriptions were used to relate the neutron maximum energy-transfer edges to the corresponding recoil-proton scintillation-light yields, and the results were compared to simulations. Parametrizations which predict the fast or total light yield of the scintillation pulses were also tested. Our results agree with both existing data and existing parametrizations. We observe a clear sensitivity to the portion and length of the neutron scintillation-light pulse considered.
△ Less
Submitted 1 November, 2016; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Using Back-Scattering to Enhance Efficiency in Neutron Detectors
Authors:
Thomas Kittelmann,
Esben Klinkby,
Xiao Xiao Cai,
Kalliopi Kanaki,
Carsten P Cooper-Jensen,
Richard Hall-Wilton
Abstract:
The principle of using strongly scattering materials to recover efficiency in neutron detectors, via back-scattering of unconverted thermal neutrons, is discussed in general. Feasibility of the method is illustrated through Geant4-based simulations of a specific setup involving a moderator-like material placed behind a single layered boron-10 thin film gaseous detector.
The principle of using strongly scattering materials to recover efficiency in neutron detectors, via back-scattering of unconverted thermal neutrons, is discussed in general. Feasibility of the method is illustrated through Geant4-based simulations of a specific setup involving a moderator-like material placed behind a single layered boron-10 thin film gaseous detector.
△ Less
Submitted 10 September, 2015;
originally announced September 2015.
-
A First Comparison of the responses of a He4-based fast-neutron detector and a NE-213 liquid-scintillator reference detector
Authors:
R. Jebali,
J. Scherzinger,
J. R. M. Annand,
R. Chandra,
G. Davatz,
K. G. Fissum,
H. Friederich,
U. Gendotti,
R. Hall-Wilton,
E. Håkansson,
K. Kanaki,
M. Lundin,
D. Murer,
B. Nilsson,
A. Rosborg,
H. Svensson
Abstract:
A first comparison has been made between the pulse-shape discrimination characteristics of a novel $^{4}$He-based pressurized scintillation detector and a NE-213 liquid-scintillator reference detector using an Am/Be mixed-field neutron and gamma-ray source and a high-resolution scintillation-pulse digitizer. In particular, the capabilities of the two fast neutron detectors to discriminate between…
▽ More
A first comparison has been made between the pulse-shape discrimination characteristics of a novel $^{4}$He-based pressurized scintillation detector and a NE-213 liquid-scintillator reference detector using an Am/Be mixed-field neutron and gamma-ray source and a high-resolution scintillation-pulse digitizer. In particular, the capabilities of the two fast neutron detectors to discriminate between neutrons and gamma-rays were investigated. The NE-213 liquid-scintillator reference cell produced a wide range of scintillation-light yields in response to the gamma-ray field of the source. In stark contrast, due to the size and pressure of the $^{4}$He gas volume, the $^{4}$He-based detector registered a maximum scintillation-light yield of 750~keV$_{ee}$ to the same gamma-ray field. Pulse-shape discrimination for particles with scintillation-light yields of more than 750~keV$_{ee}$ was excellent in the case of the $^{4}$He-based detector. Above 750~keV$_{ee}$ its signal was unambiguously neutron, enabling particle identification based entirely upon the amount of scintillation light produced.
△ Less
Submitted 27 April, 2015; v1 submitted 13 February, 2015;
originally announced February 2015.
-
Overcoming High Energy Backgrounds at Pulsed Spallation Sources
Authors:
Nataliia Cherkashyna,
Richard J. Hall-Wilton,
Douglas D. DiJulio,
Anton Khaplanov,
Dorothea Pfeiffer,
Julius Scherzinger,
Carsten P. Cooper-Jensen,
Kevin G. Fissum,
Stuart Ansell,
Erik B. Iverson,
Georg Ehlers,
Franz X. Gallmeier,
Tobias Panzner,
Emmanouela Rantsiou,
Kalliopi Kanaki,
Uwe Filges,
Thomas Kittelmann,
Maddi Extegarai,
Valentina Santoro,
Oliver Kirstein,
Phillip M. Bentley
Abstract:
Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which ca…
▽ More
Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which can be highly problematic for a subset of instruments and measurements due to the time-correlated properties, and different to that from reactor sources. Measurements of this background have been made at both SNS (ORNL, Oak Ridge, TN, USA) and SINQ (PSI, Villigen, Switzerland). The background levels were generally found to be low compared to natural background. However, very low intensities of high-energy particles have been found to be detrimental to instrument performance in some conditions. Given that instrument performance is typically characterised by S/N, improvements in backgrounds can both improve instrument performance whilst at the same time delivering significant cost savings. A systematic holistic approach is suggested in this contribution to increase the effectiveness of this. Instrument performance should subsequently benefit.
△ Less
Submitted 10 January, 2015;
originally announced January 2015.
-
Neutron Position Sensitive Detectors for the ESS
Authors:
Oliver Kirstein,
Richard Hall-Wilton,
Irina Stefanescu,
Maddi Etxegarai,
Michail Anastasopoulos,
Kevin Fissum,
Anna Gulyachkina,
Carina Höglund,
Mewlude Imam,
Kalliopi Kanaki,
Anton Khaplanov,
Thomas Kittelmann,
Scott Kolya,
Björn Nilsson,
Luis Ortega,
Dorothea Pfeiffer,
Francesco Piscitelli,
Judith Freita Ramos,
Linda Robinson,
Julius Scherzinger
Abstract:
The European Spallation Source (ESS) in Lund, Sweden will become the world's leading neutron source for the study of materials. The instruments are being selected from conceptual proposals submitted by groups from around Europe. These instruments present numerous challenges for detector technology in the absence of the availability of Helium-3, which is the default choice for detectors for instrum…
▽ More
The European Spallation Source (ESS) in Lund, Sweden will become the world's leading neutron source for the study of materials. The instruments are being selected from conceptual proposals submitted by groups from around Europe. These instruments present numerous challenges for detector technology in the absence of the availability of Helium-3, which is the default choice for detectors for instruments built until today and due to the extreme rates expected across the ESS instrument suite. Additionally a new generation of source requires a new generation of detector technologies to fully exploit the opportunities that this source provides. The detectors will be sourced from partners across Europe through numerous in-kind arrangements; a process that is somewhat novel for the neutron scattering community. This contribution presents briefly the current status of detectors for the ESS, and outlines the timeline to completion. For a conjectured instrument suite based upon instruments recommended for construction, a recently updated snapshot of the current expected detector requirements is presented. A strategy outline as to how these requirements might be tackled by novel detector developments is shown. In terms of future developments for the neutron community, synergies should be sought with other disciples, as recognized by various recent initiatives in Europe, in the context of the fundamentally multi-disciplinary nature of detectors. This strategy has at its basis the in-kind and collaborative partnerships necessary to be able to produce optimally performant detectors that allow the ESS instruments to be world-leading. This foresees and encourages a high level of collaboration and interdependence at its core, and rather than each group being all-rounders in every technology, the further development of centres of excellence across Europe for particular technologies and niches.
△ Less
Submitted 23 November, 2014;
originally announced November 2014.
-
Tagging fast neutrons from an 241Am/9Be source
Authors:
J. Scherzinger,
J. R. M. Annand,
G. Davatz,
K. G. Fissum,
U. Gendotti,
R. Hall-Wilton,
A. Rosborg,
E. Håkansson,
R. Jebali,
K. Kanaki,
M. Lundin,
B. Nilsson,
H. Svensson
Abstract:
We report on an investigation of the fast-neutron spectrum emitted by 241Am/9Be. Well-understood shielding, coincidence, and time-of-flight measurement techniques are employed to produce a continuous, polychromatic, energy-tagged neutron beam.
We report on an investigation of the fast-neutron spectrum emitted by 241Am/9Be. Well-understood shielding, coincidence, and time-of-flight measurement techniques are employed to produce a continuous, polychromatic, energy-tagged neutron beam.
△ Less
Submitted 3 January, 2015; v1 submitted 12 May, 2014;
originally announced May 2014.
-
Geant4 based simulations for novel neutron detector development
Authors:
Thomas Kittelmann,
Irina Stefanescu,
Kalliopi Kanaki,
Mirko Boin,
Richard Hall-Wilton,
Karl Zeitelhack
Abstract:
A Geant4-based Python/C++ simulation and coding framework, which has been developed and used in order to aid the R&D efforts for thermal neutron detectors at neutron scattering facilities, is described. Built upon configurable geometry and generator modules, it integrates a general purpose object oriented output file format with meta-data, developed in order to facilitate a faster turn-around time…
▽ More
A Geant4-based Python/C++ simulation and coding framework, which has been developed and used in order to aid the R&D efforts for thermal neutron detectors at neutron scattering facilities, is described. Built upon configurable geometry and generator modules, it integrates a general purpose object oriented output file format with meta-data, developed in order to facilitate a faster turn-around time when setting up and analysing simulations. Also discussed are the extensions to Geant4 which have been implemented in order to include the effects of low-energy phenomena such as Bragg diffraction in the polycrystalline support materials of the detector. Finally, an example application of the framework is briefly shown.
△ Less
Submitted 5 November, 2013;
originally announced November 2013.
-
pK+Λfinal state: towards the extraction of the ppK- contribution
Authors:
L. Fabbietti,
G. Agakishiev,
A. Balanda,
D. Belver,
A. V. Belyaev,
J-C Berger-Chen,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
E. Epple,
T. Eberl,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzon
, et al. (77 additional authors not shown)
Abstract:
The reaction p(@3.5\,GeV)+p -> p+Λ+ K^+ can be studied to search for the existence of kaonic bound states like ppK^- leading to this final state. This effort has been motivated by the assumption that in p+p collisions the Λ(1405) resonance can act as a doorway to the formation of the kaonic bound states. The status of this analysis within the HADES collaboration, with particular emphasis on the co…
▽ More
The reaction p(@3.5\,GeV)+p -> p+Λ+ K^+ can be studied to search for the existence of kaonic bound states like ppK^- leading to this final state. This effort has been motivated by the assumption that in p+p collisions the Λ(1405) resonance can act as a doorway to the formation of the kaonic bound states. The status of this analysis within the HADES collaboration, with particular emphasis on the comparison to simulations, is shown in this work and the deviation method utilized by the DISTO collaboration in a similar analysis is discussed. The outcome suggests the employment of a partial wave analysis to disentangle the different contributions to the measured pK^+Λfinal state.
△ Less
Submitted 25 July, 2013; v1 submitted 12 May, 2013;
originally announced May 2013.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
-
Inclusive dielectron production in proton-proton collisions at 2.2 GeV beam energy
Authors:
G. Agakishiev,
H. Alvarez-Pol,
A. Balanda,
R. Bassini,
M. Böhmer,
H. Bokemeye,
J. L. Boyard,
P. Cabanelas,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
T. Eberl,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzón,
R. Gernhäuser,
C. Gilardi,
M. Golubeva,
D. González-Díaz
, et al. (71 additional authors not shown)
Abstract:
Data on inclusive dielectron production are presented for the reaction p+p at 2.2 GeV measured with the High Acceptance DiElectron Spectrometer (HADES). Our results supplement data obtained earlier in this bombarding energy regime by DLS and HADES. The comparison with the 2.09 GeV DLS data is discussed. The reconstructed e+e- distributions are confronted with simulated pair cocktails, revealing an…
▽ More
Data on inclusive dielectron production are presented for the reaction p+p at 2.2 GeV measured with the High Acceptance DiElectron Spectrometer (HADES). Our results supplement data obtained earlier in this bombarding energy regime by DLS and HADES. The comparison with the 2.09 GeV DLS data is discussed. The reconstructed e+e- distributions are confronted with simulated pair cocktails, revealing an excess yield at invariant masses around 0.5 GeV/c2. Inclusive cross sections of neutral pion and eta production are obtained.
△ Less
Submitted 12 March, 2012;
originally announced March 2012.
-
Study of exclusive one-pion and one-eta production using hadron and dielectron channels in pp reactions at kinetic beam energies of 1.25 GeV and 2.2 GeV with HADES
Authors:
HADES Collaboration,
G. Agakishiev,
H. Alvarez-Pol,
A. Balanda,
R. Bassini,
M. Böhmer,
H. Bokemeyer,
J. L. Boyard,
P. Cabanelas,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
T. Eberl,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzón,
R. Gernhäuser,
C. Gilardi,
M. Golubeva
, et al. (71 additional authors not shown)
Abstract:
We present measurements of exclusive π^{+,0} and η production in pp reactions at 1.25 GeV and 2.2 GeV beam kinetic energy in hadron and dielectron channels. In the case of π^+ and π^0, high-statistics invariant-mass and angular distributions are obtained within the HADES acceptance as well as acceptance corrected distributions, which are compared to a resonance model. The sensitivity of the data t…
▽ More
We present measurements of exclusive π^{+,0} and η production in pp reactions at 1.25 GeV and 2.2 GeV beam kinetic energy in hadron and dielectron channels. In the case of π^+ and π^0, high-statistics invariant-mass and angular distributions are obtained within the HADES acceptance as well as acceptance corrected distributions, which are compared to a resonance model. The sensitivity of the data to the yield and production angular distribution of Δ(1232) and higher lying baryon resonances is shown, and an improved parameterization is proposed. The extracted cross sections are of special interest in the case of pp \to pp η, since controversial data exist at 2.0 GeV; we find σ=0.142 \pm 0.022 mb. Using the dielectron channels, the π^0 and η Dalitz decay signals are reconstructed with yields fully consistent with the hadronic channels. The electron invariant masses and acceptance corrected helicity angle distributions are found in good agreement with model predictions.
△ Less
Submitted 23 April, 2012; v1 submitted 6 March, 2012;
originally announced March 2012.
-
Production of Sigma{\pm}pi?pK+ in p+p reactions at 3.5 GeV beam energy
Authors:
G. Agakishiev,
A. Balanda,
D. Belver,
A. Belyaev,
J. C. Berger-Chen,
A. Blanco,
M. Boehmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ M. Destefanis,
F. Dohrmann,
A. Dybczak,
E. Epple,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzon,
R. Gernhäuser,
C. Gilardi
, et al. (76 additional authors not shown)
Abstract:
We study the production of Sigma^+-pi^+-pK^+ particle quartets in p+p reactions at 3.5 GeV kinetic beam energy. The data were taken with the HADES experiment at GSI. This report evaluates the contribution of resonances like Lambda(1405$, Sigma(1385)^0, Lambda(1520), Delta(1232), N^* and K^*0 to the Sigma^+- pi^-+ p K+ final state. The resulting simulation model is compared to the experimental data…
▽ More
We study the production of Sigma^+-pi^+-pK^+ particle quartets in p+p reactions at 3.5 GeV kinetic beam energy. The data were taken with the HADES experiment at GSI. This report evaluates the contribution of resonances like Lambda(1405$, Sigma(1385)^0, Lambda(1520), Delta(1232), N^* and K^*0 to the Sigma^+- pi^-+ p K+ final state. The resulting simulation model is compared to the experimental data in several angular distributions and it shows itself as suitable to evaluate the acceptance corrections properly.
△ Less
Submitted 13 February, 2012;
originally announced February 2012.
-
Determination of the $\mathbf{Σ(1385)^{0}/Λ(1405)}$ ratio in p+p collisions at 3.5 GeV
Authors:
G. Agakishiev,
A. Balanda,
D. Belver,
A. V. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
J. C. Chen,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
E. Epple,
L. Fabbietti,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzón,
R. Gernhäuser
, et al. (76 additional authors not shown)
Abstract:
The aim of the present analysis is to determine the relative production cross sections of the $Λ$(1405) and $Σ(1385)^{0}$ resonances in p+p collisions at E$_{kin}$=3.5 GeV measured with HADES. Upper and lower limits have been determined for the ratio $σ_{(Σ(1385)^{0}+p+K^{+})}/σ_{(Λ(1405)+p+K^{+})}=0.76_{-0.26}^{+0.54}$. The knowledge of this ratio is an essential input for the analysis of the dec…
▽ More
The aim of the present analysis is to determine the relative production cross sections of the $Λ$(1405) and $Σ(1385)^{0}$ resonances in p+p collisions at E$_{kin}$=3.5 GeV measured with HADES. Upper and lower limits have been determined for the ratio $σ_{(Σ(1385)^{0}+p+K^{+})}/σ_{(Λ(1405)+p+K^{+})}=0.76_{-0.26}^{+0.54}$. The knowledge of this ratio is an essential input for the analysis of the decay $Λ(1405)\rightarrowΣ^{\pm}π^{\mp}$, where an unambiguous separation of the $Λ$(1405) and $Σ(1385)^{0}$ signals is not possible.
△ Less
Submitted 1 February, 2012;
originally announced February 2012.
-
Inclusive dielectron spectra in p+p collisions at 3.5 GeV
Authors:
G. Agakishiev,
A. Balanda,
D. Belver,
A. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
J. C. Chen,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
E. Epple,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzón,
R. Gernhäuser
, et al. (76 additional authors not shown)
Abstract:
We present the inclusive invariant-mass, transverse momentum and rapidity distributions of dielectrons (e$^{+}$e$^{-}$ pairs) in p+p interactions at 3.5 GeV beam kinetic energy. In the vector-meson mass region, a distinct peak corresponding to direct $ω$ decays is reconstructed with 2% mass resolution. The data is compared to predictions from three model calculations. Due to the large acceptance o…
▽ More
We present the inclusive invariant-mass, transverse momentum and rapidity distributions of dielectrons (e$^{+}$e$^{-}$ pairs) in p+p interactions at 3.5 GeV beam kinetic energy. In the vector-meson mass region, a distinct peak corresponding to direct $ω$ decays is reconstructed with 2% mass resolution. The data is compared to predictions from three model calculations. Due to the large acceptance of the HADES apparatus for $e^{+}e^{-}$ invariant masses above 0.2 GeV/$c^{2}$ and for transverse pair momenta p$_{t}$ $ <$ 1 GeV/$c$, acceptance corrections are to a large extent model independent. This allows us to extract from dielectron data for the first time at this energy the inclusive production cross sections for light vector mesons. Inclusive production cross sections for $π^o$ and $η$ mesons are also reported. The obtained results will serve as an important reference for the study of vector meson production in proton-nucleus and heavy-ion collisions. Furthermore, using this data, an improved value for the upper bound of the branching ratio for direct $η$ decays into the electron-positron channel is obtained.
△ Less
Submitted 15 December, 2011;
originally announced December 2011.
-
Baryonic resonances close to the Kbar-N threshold: the case of Sigma(1385)^+ in pp collisions
Authors:
G. Agakishiev,
A. Balanda,
D. Belver,
A. V. Belyaev,
A. Blanco,
M. Boehmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
J. C. Chen,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
E. Epple,
T. Eberl,
L. Fabbietti,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Froehlich,
T. Galatyuk,
J. A. Garzon
, et al. (77 additional authors not shown)
Abstract:
We present results of an exclusive measurement of the first excited state of the Sigma hyperon, Sigma(1385)^+, produced in p+p -> Sigma^+ + K^+ + n at 3.5 GeV beam energy. The extracted data allow to study in detail the invariant mass distribution of the Sigma(1385)^+. The mass distribution is well described by a relativistic Breit-Wigner function with a maximum at m_0 = 1383.2 +- 0.9 MeV/c^2 and…
▽ More
We present results of an exclusive measurement of the first excited state of the Sigma hyperon, Sigma(1385)^+, produced in p+p -> Sigma^+ + K^+ + n at 3.5 GeV beam energy. The extracted data allow to study in detail the invariant mass distribution of the Sigma(1385)^+. The mass distribution is well described by a relativistic Breit-Wigner function with a maximum at m_0 = 1383.2 +- 0.9 MeV/c^2 and a width of 40.2 +- 2.1 MeV/c^2. The exclusive production cross-section comes out to be 22.27 +- 0.89 +- 1.56 +3.07 -2.10 mu b. Angular distributions of the Sigma(1385)^+ in different reference frames are found to be compatible with the hypothesis that 33 % of Sigma(1385)^+ result from the decay of an intermediate Delta^{++} resonance.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
-
Dielectron production in Ar+KCl collisions at 1.76A GeV
Authors:
G. Agakishiev,
A. Balanda,
D. Belver,
A. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
F. Dohrmann,
A. Dybczak,
T. Eberl,
E. Epple,
L. Fabbbietti,
O. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk,
J. A. Garzon,
R. Gernhäuser
, et al. (76 additional authors not shown)
Abstract:
We present results on dielectron production in Ar+KCl collisions at 1.76A GeV. For the first time $ω$ mesons could be reconstructed in a heavy-ion reaction at a bombarding energy which is well below the production threshold in free nucleon-nucleon collisions. The omega multiplicity has been extracted and compared to the yields of other particles, in particular of the phi meson. At intermediate e+e…
▽ More
We present results on dielectron production in Ar+KCl collisions at 1.76A GeV. For the first time $ω$ mesons could be reconstructed in a heavy-ion reaction at a bombarding energy which is well below the production threshold in free nucleon-nucleon collisions. The omega multiplicity has been extracted and compared to the yields of other particles, in particular of the phi meson. At intermediate e+e- invariant masses, we find a strong enhancement of the pair yield over a reference spectrum from elementary nucleon-nucleon reactions suggesting the onset of non-trivial effects of the nuclear medium. Transverse-mass spectra and angular distributions have been reconstructed in three invariant mass bins. In the former unexpectedly large slopes are found for high-mass pairs. The latter, in particular the helicity-angle distributions, are largely consistent with expectations for a pair cocktail dominated at intermediate masses by delta Dalitz decays.
△ Less
Submitted 24 June, 2011; v1 submitted 4 March, 2011;
originally announced March 2011.
-
Hyperon production in Ar+KCl collisions at 1.76A GeV
Authors:
G. Agakishiev,
A. Balanda,
B. Bannier,
R. Bassini,
D. Belver,
A. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
J. Diaz,
F. Dohrmann,
A. Dybczak,
T. Eberl,
E. Epple,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Froehlich
, et al. (89 additional authors not shown)
Abstract:
We present transverse momentum spectra, rapidity distribution and multiplicity of Lambda-hyperons measured with the HADES spectrometer in the reaction Ar(1.76A GeV)+KCl. The yield of Xi- is calculated from our previously reported Xi-/(Lambda+Sigma0) ratio and compared to other strange particle multiplicities. Employing a strangeness balance equation the multiplicities of the yet unmeasured charged…
▽ More
We present transverse momentum spectra, rapidity distribution and multiplicity of Lambda-hyperons measured with the HADES spectrometer in the reaction Ar(1.76A GeV)+KCl. The yield of Xi- is calculated from our previously reported Xi-/(Lambda+Sigma0) ratio and compared to other strange particle multiplicities. Employing a strangeness balance equation the multiplicities of the yet unmeasured charged Sigma hyperons can be estimated. Finally a statistical hadronization model is used to fit the yields of pi-, K+, K0s, K-, phi, Lambda and Xi-. The resulting chemical freeze-out temperature of T=(76+-2) MeV is compared to the measured slope parameters obtained from fits to the transverse mass distributions of the particles.
△ Less
Submitted 10 February, 2011; v1 submitted 8 October, 2010;
originally announced October 2010.
-
In-Medium Effects on K0 Mesons in Relativistic Heavy-Ion Collisions
Authors:
G. Agakishiev,
A. Balanda,
B. Bannier,
R. Bassini,
D. Belver,
A. V. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
J. Díaz,
F. Dohrmann,
A. Dybczak,
T. Eberl,
E. Epple,
L. Fabbietti,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich
, et al. (86 additional authors not shown)
Abstract:
We present the transverse momentum spectra and rapidity distributions of $π^{-}$ and K$^0_S$ in Ar+KCl reactions at a beam kinetic energy of 1.756 A GeV measured with the spectrometer HADES. The reconstructed K$^0_S$ sample is characterized by good event statistics for a wide range in momentum and rapidity. We compare the experimental $π^{-}$ and K$^0_S$ distributions to predictions by the IQMD mo…
▽ More
We present the transverse momentum spectra and rapidity distributions of $π^{-}$ and K$^0_S$ in Ar+KCl reactions at a beam kinetic energy of 1.756 A GeV measured with the spectrometer HADES. The reconstructed K$^0_S$ sample is characterized by good event statistics for a wide range in momentum and rapidity. We compare the experimental $π^{-}$ and K$^0_S$ distributions to predictions by the IQMD model. The model calculations show that K$^0_S$ at low tranverse momenta constitute a particularly well suited tool to investigate the kaon in-medium potential. Our K$^0_S$ data suggest a strong repulsive in-medium K$^0$ potential of about 40 MeV strength.
△ Less
Submitted 28 September, 2010; v1 submitted 22 April, 2010;
originally announced April 2010.
-
Lambda-p femtoscopy in collisions of Ar+KCl at 1.76 AGeV
Authors:
G. Agakishiev,
A. Balanda,
R. Bassini,
D. Belver,
A. V. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Braun-Munzinger,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
J. Díaz,
F. Dohrmann,
A. Dybczak,
T. Eberl,
L. Fabbietti,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk
, et al. (81 additional authors not shown)
Abstract:
Results on $Λ$p femtoscopy are reported at the lowest energy so far. At a beam energy of 1.76A~GeV, the reaction Ar+KCl was studied with the High Acceptance Di-Electron Spectrometer (HADES) at SIS18/GSI. A high-statistics and high-purity $Λ$ sample was collected, allowing for the investigation of $Λ$ p correlations at small relative momenta. The experimental correlation function is compared to cor…
▽ More
Results on $Λ$p femtoscopy are reported at the lowest energy so far. At a beam energy of 1.76A~GeV, the reaction Ar+KCl was studied with the High Acceptance Di-Electron Spectrometer (HADES) at SIS18/GSI. A high-statistics and high-purity $Λ$ sample was collected, allowing for the investigation of $Λ$ p correlations at small relative momenta. The experimental correlation function is compared to corresponding model calculations allowing the determination of the space-time extent of the $Λ$p emission source. The $Λ$p source radius is found slightly smaller than the pp correlation radius for a similar collis ion system. The present $Λ$p radius is significantly smaller than that found for Au+Au/Pb+Pb collisio ns in the AGS, SPS and RHIC energy domains, but larger than that observed for electroproduction from He. Taking into account all available data, we find the $Λ$p source radius to increase almost linearly with the number of participants to the power of one-third.
△ Less
Submitted 14 April, 2010;
originally announced April 2010.
-
Inclusive Dielectron Production in Ar+KCl Collisions at 1.76 AGeV studied with HADES
Authors:
The HADES Collaboration,
F. Krizek,
G. Agakishiev,
A. Balanda,
G. Bellia,
D. Belver,
A. Belyaev,
A. Blanco,
M. Boehmer,
J. L. Boyard,
P. Braun-Munzinger,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
J. Diaz,
F. Dohrmann,
A. Dybczak,
L. Fabbietti,
O. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Froehlich
, et al. (88 additional authors not shown)
Abstract:
Results of the HADES measurement of inclusive dielectron production in Ar+KCl collisions at a kinetic beam energy of 1.76 AGeV are presented. For the first time, high mass resolution spectroscopy was performed. The invariant mass spectrum of dielectrons is compared with predictions of UrQMD and HSD transport codes.
Results of the HADES measurement of inclusive dielectron production in Ar+KCl collisions at a kinetic beam energy of 1.76 AGeV are presented. For the first time, high mass resolution spectroscopy was performed. The invariant mass spectrum of dielectrons is compared with predictions of UrQMD and HSD transport codes.
△ Less
Submitted 16 September, 2009; v1 submitted 21 July, 2009;
originally announced July 2009.
-
Deep sub-threshold $Ξ^-$ production in Ar+KCl reactions at 1.76A GeV
Authors:
G. Agakishiev,
A. Balanda,
R. Bassini,
D. Belver,
A. V. Belyaev,
A. Blanco,
M. Böhmer,
J. L. Boyard,
P. Braun-Munzinger,
P. Cabanelas,
E. Castro,
S. Chernenko,
T. Christ,
M. Destefanis,
J. Díaz,
F. Dohrmann,
A. Dybczak,
T. Eberl,
L. Fabbietti,
O. V. Fateev,
P. Finocchiaro,
P. Fonte,
J. Friese,
I. Fröhlich,
T. Galatyuk
, et al. (79 additional authors not shown)
Abstract:
We report first results on a deep sub-threshold production of the doubly strange hyperon $Ξ^-$ in a heavy-ion reaction. At a beam energy of 1.76A GeV the reaction Ar+KCl was studied with the High Acceptance Di-Electron Spectrometer (HADES) at SIS18/GSI. A high-statistics and high-purity $Λ$ sample was collected, allowing for the investigation of the decay channel $Ξ^- \to Λπ^-$. The deduced…
▽ More
We report first results on a deep sub-threshold production of the doubly strange hyperon $Ξ^-$ in a heavy-ion reaction. At a beam energy of 1.76A GeV the reaction Ar+KCl was studied with the High Acceptance Di-Electron Spectrometer (HADES) at SIS18/GSI. A high-statistics and high-purity $Λ$ sample was collected, allowing for the investigation of the decay channel $Ξ^- \to Λπ^-$. The deduced $Ξ^-/(Λ+Σ^0)$ production ratio of $(5.6 \pm 1.2 ^{+1.8}_{-1.7})\cdot 10^{-3}$ is significantly larger than available model predictions.
△ Less
Submitted 21 July, 2009;
originally announced July 2009.
