-
Direct observation of nanometer-scale orbital angular momentum accumulation
Authors:
Juan Carlos Idrobo,
Ján Rusz,
Gopal Datt,
Daegeun Jo,
Sanaz Alikhah,
David Muradas,
Ulrich Noumbe,
M. Venkata Kamalakar,
Peter M. Oppeneer
Abstract:
Conversion of charge to orbital angular momentum through the orbital Hall effect (OHE) holds transformative potential for the development of orbital-based electronics, however, it is challenging to directly observe the electrically generated orbital accumulation. Here, we detect the OHE by directly quantifying the orbital accumulation along the edges of a titanium thin film using a scanning transm…
▽ More
Conversion of charge to orbital angular momentum through the orbital Hall effect (OHE) holds transformative potential for the development of orbital-based electronics, however, it is challenging to directly observe the electrically generated orbital accumulation. Here, we detect the OHE by directly quantifying the orbital accumulation along the edges of a titanium thin film using a scanning transmission electron microscope. We measure the Ti L-edge using electron energy-loss spectroscopy with nanometer resolution and find a sizable orbital accumulation at the sample's outer perimeters, consistent with all signatures expected for the OHE, and determine an orbital diffusion length $\ell_o \approx 7.3$ nm. Our data points to a surprising dependence of the orbital diffusion length on the nano-structural morphology.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
sp$^{2}$/sp$^{3}$ bonding controlling mechanism at the $α$-Al$_{2}$O$_{3}|$graphene interface
Authors:
Renan P. Maciel,
Chin Shen Ong,
Daria Belotcerkovtceva,
Yaroslav O. Kvashnin,
Danny Thonig,
M. Venkata Kamalakar,
Olle Eriksson
Abstract:
First-principles calculations reported here illuminate the effects of the interfacial properties of $α$-Al$_{2}$O$_{3}$ and graphene, with emphasis on the structural and electronic properties. Various contact interfaces and different $α$-Al$_{2}$O$_{3}$ surface terminations are considered with on and slightly-off stoichiometric aluminium oxide. We show that depending on whether aluminium or oxygen…
▽ More
First-principles calculations reported here illuminate the effects of the interfacial properties of $α$-Al$_{2}$O$_{3}$ and graphene, with emphasis on the structural and electronic properties. Various contact interfaces and different $α$-Al$_{2}$O$_{3}$ surface terminations are considered with on and slightly-off stoichiometric aluminium oxide. We show that depending on whether aluminium or oxygen is in contact with graphene, an $sp^{3}$ structural deformation and spontaneous spin-polarization may occur next to the interface contact. Interestingly, some cases cause a $p$-type do** in the graphene band structure, depending on the initial $α$-Al$_{2}$O$_{3}$ geometry placed on graphene. The importance of leaving the surface dangling bonds of alumina saturated or not is also highlighted, and we show that it might be a control mechanism for opening a gap in graphene by the influence of the $sp^{3}$ bond between oxygen and carbon atoms at the interface. We discuss the potential of utilizing this sensitivity for practical applications.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Intra-Atomic and Local Exchange Fields in the Van der Waals Magnet CrI3
Authors:
Anirudha Ghosh,
H. Johan M. Jonsson,
D. J. Mukkattukavil,
Y. Kvashnin,
D. Phuyal,
M. Agaker,
Alessandro Nicolaou,
M. Jonak,
R. Klingeler,
M. V. Kamalakar,
Hakan Rensmo,
Tapati Sarkar,
Alexander N. Vasiliev,
Sergei Butorin,
J. -E. Rubensson,
Olle Eriksson,
Mahmoud Abdel-Hafiez
Abstract:
We report on a combined experimental and theoretical study on CrI3 single crystals by employing the polarization dependence of resonant inelastic X-ray scattering (RIXS). Our investigations reveal multiple Cr 3d orbital splitting (dd excitations) as well as magnetic dichroism (MD) in the RIXS spectra which is evidence of spin-flip in the dd excitation. Interestingly, the dd excitation energies are…
▽ More
We report on a combined experimental and theoretical study on CrI3 single crystals by employing the polarization dependence of resonant inelastic X-ray scattering (RIXS). Our investigations reveal multiple Cr 3d orbital splitting (dd excitations) as well as magnetic dichroism (MD) in the RIXS spectra which is evidence of spin-flip in the dd excitation. Interestingly, the dd excitation energies are similar on both sides of the ferromagnetic transition temperature, TC of 61 K, although MD in RIXS is predominant at 0.4 tesla magnetic field below TC. This demonstrates that the ferromagnetic superexchange interaction that is responsible for the intra-atomic exchange field, is vanishingly small compared to local exchange field that comes from exchange and correlation interaction among the interacting Cr 3d orbitals. The investigation presented here demonstrate that the electronic structure of bulk CrI3 is complex in the sense that dynamical electron correlations are significant. The recorded RIXS spectra reported here reveal clearly resolved Cr 3d intra-orbital dd excitations that represent transitions between electronic levels that are heavily influenced by multi-configuration effects. Our calculations employing the crystal field TTmultiplet theory taking into account the Cr 3d hybridization with the ligand valence states and the full multiplet structure due to intra-atomic and crystal field interactions in Oh and D3d symmetry, clearly reproduced the dichroic trend in experimental RIXS spectra.
△ Less
Submitted 12 January, 2022;
originally announced January 2022.
-
Flexible ferromagnetic nanowires with ultralow magnetostriction
Authors:
Giuseppe Muscas,
Petra E. Jönsson,
I. G. Serrano,
Örjan Vallin,
M. Venkata Kamalakar
Abstract:
Integration of magneto-electric and spintronic sensors presents a massive potential for advancing flexible and wearable technology. Magnetic nanowires are core components for building such devices, and therefore it important to realize flexible magnetic nanowires and uncover magneto-elastic properties, which can propel not only such flexible sensing applications, but can also make new pathways for…
▽ More
Integration of magneto-electric and spintronic sensors presents a massive potential for advancing flexible and wearable technology. Magnetic nanowires are core components for building such devices, and therefore it important to realize flexible magnetic nanowires and uncover magneto-elastic properties, which can propel not only such flexible sensing applications, but can also make new pathways for exploration of flexible magneto-plasmonic devices, and discovering unseen observations at reduced dimensions. Here, we realize ferromagnetic nanowires on flexible substrates for the first time. Through extensive magneto-optical Kerr experiments, exploring the Villari effect in such nanowires, we reveal a two-order of magnitude reduced magnetostrictive constant in nanowires, compared to bulk values. In addition, the nanowires exhibit a remarkably resilient behavior sustaining bending radii ~ 5 mm, very high endurance, and enhanced elastic limit compared to thin films of similar thickness and composition. We confirm the observed performance by micro-magnetic simulations and attribute the observations to the size reduction and high nanostructure-interfacial effects. The flexible magnetic nanowires with ultralow magnetostriction open up new opportunities for stable surface mountable and wearable spintronic sensors, enable a credible way for engineering advanced nanospintronic devices and exploring new effects in hybrid heterostructures.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Fermi velocity renormalization in graphene probed by terahertz time-domain spectroscopy
Authors:
Patrick R. Whelan,
Qian Shen,
Binbin Zhou,
I. G. Serrano,
M. Venkata Kamalakar,
David M. A. Mackenzie,
Jie Ji,
De** Huang,
Haofei Shi,
Da Luo,
Meihui Wang,
Rodney S. Ruoff,
Antti-Pekka Jauho,
Peter U. Jepsen,
Peter Bøggild,
José M. Caridad
Abstract:
We demonstrate terahertz time-domain spectroscopy (THz-TDS) to be an accurate, rapid and scalable method to probe the interaction-induced Fermi velocity renormalization νF^* of charge carriers in graphene. This allows the quantitative extraction of all electrical parameters (DC conductivity σDC, carrier density n, and carrier mobility μ) of large-scale graphene films placed on arbitrary substrates…
▽ More
We demonstrate terahertz time-domain spectroscopy (THz-TDS) to be an accurate, rapid and scalable method to probe the interaction-induced Fermi velocity renormalization νF^* of charge carriers in graphene. This allows the quantitative extraction of all electrical parameters (DC conductivity σDC, carrier density n, and carrier mobility μ) of large-scale graphene films placed on arbitrary substrates via THz-TDS. Particularly relevant are substrates with low relative permittivity (< 5) such as polymeric films, where notable renormalization effects are observed even at relatively large carrier densities (> 10^12 cm-2, Fermi level > 0.1 eV). From an application point of view, the ability to rapidly and non-destructively quantify and map the electrical (σDC, n, μ) and electronic (νF^* ) properties of large-scale graphene on generic substrates is key to utilize this material in applications such as metrology, flexible electronics as well as to monitor graphene transfers using polymers as handling layers.
△ Less
Submitted 31 May, 2020;
originally announced June 2020.
-
Unconventional Strain-Dependent Conductance Oscillations in Pristine Phosphorene
Authors:
S. J. Ray,
M. Venkata Kamalakar
Abstract:
Phosphorene is a single elemental two-dimensional semiconductor that has quickly emerged as a high mobility material for transistors and optoelectronic devices. In addition, being a 2D material, it can sustain high levels of strain, enabling sensitive modification of its electronic properties. In this paper, we investigate the strain dependent electrical properties of phosphorene nanocrystals. Per…
▽ More
Phosphorene is a single elemental two-dimensional semiconductor that has quickly emerged as a high mobility material for transistors and optoelectronic devices. In addition, being a 2D material, it can sustain high levels of strain, enabling sensitive modification of its electronic properties. In this paper, we investigate the strain dependent electrical properties of phosphorene nanocrystals. Performing extensive calculations we determine electrical conductance as a function uniaxial as well as biaxial strain stimulus, and uncover a unique zone phase diagram. This enables us to uncover for the first time conductance oscillations in pristine phopshorene, by simple application of strain. We show that how such unconventional current-voltage behaviour is tuneable by the nature of strain, and how an additional gate voltage can modulate amplitude (peak to valley ratio) of the observed phenomena and its switching efficiency. Furthermore, we show that the switching is highly robust against do** and defects. Our detailed results present new leads for innovations in strain based gauging and high-frequency nanoelectronic switches of phosphorene.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
Do** induced site-selective Mott insulating phase in LaFeO$_3$
Authors:
S. Jana,
S. K. Panda,
D. Phuyal,
B. Pal,
S. Mukherjee,
A. Dutta,
P. Anil Kumar,
D. Hedlund,
J. Schott,
P. Thunstrom,
Y. Kvashnin,
H. Rensmo,
M. Venkata Kamalakar,
Carlo. U. Segre,
P. Svedlindh,
K. Gunnarsson,
S. Biermann,
O. Eriksson,
O. Karis,
D. D. Sarma
Abstract:
Tailoring transport properties of strongly correlated electron systems in a controlled fashion counts among the dreams of materials scientists. In copper oxides, varying the carrier concentration is a tool to obtain high-temperature superconducting phases. In manganites, do** results in exotic physics such as insulator-metal transitions (IMT), colossal magnetoresistance (CMR), orbital- or charge…
▽ More
Tailoring transport properties of strongly correlated electron systems in a controlled fashion counts among the dreams of materials scientists. In copper oxides, varying the carrier concentration is a tool to obtain high-temperature superconducting phases. In manganites, do** results in exotic physics such as insulator-metal transitions (IMT), colossal magnetoresistance (CMR), orbital- or charge-ordered (CO) or charge-disproportionate (CD) states. In most oxides, antiferromagnetic order and charge-disproportionation are asssociated with insulating behavior. Here we report the realization of a unique physical state that can be induced by Mo do** in LaFeO$_3$: the resulting metallic state is a site-selective Mott insulator where itinerant electrons evolving in low-energy Mo states coexist with localized carriers on the Fe sites. In addition, a local breathing-type lattice distortion induces charge disproportionation on the latter, without destroying the antiferromagnetic order. A state, combining antiferromangetism, metallicity and CD phenomena is rather rare in oxides and may be of utmost significance for future antiferromagnetic memory devices.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
Two-dimensional flexible high diffusive spin circuits
Authors:
I. G. Serrano,
J. Panda,
Fernand Denoel,
Örjan Vallin,
Dibya Phuyal,
Olof Karis,
M. Venkata Kamalakar
Abstract:
Owing to their unprecedented electronic properties, graphene and two-dimensional (2D) crystals have brought fresh opportunities for advances in planar spintronic devices. Graphene is an ideal medium for spin transport while also being an exceptionally resilient material for flexible electronics. However, these extraordinary traits have never been combined to create flexible graphene spin circuits.…
▽ More
Owing to their unprecedented electronic properties, graphene and two-dimensional (2D) crystals have brought fresh opportunities for advances in planar spintronic devices. Graphene is an ideal medium for spin transport while also being an exceptionally resilient material for flexible electronics. However, these extraordinary traits have never been combined to create flexible graphene spin circuits. Realizing such circuits could lead to bendable strain-based spin sensors, a unique platform to explore pure spin current based operations and low power flexible nanoelectronics. Here, we demonstrate graphene spin circuits on flexible substrates for the first time. These circuits, realized using chemical vapour deposited (CVD) graphene, exhibit large spin diffusion coefficients ~0.19-0.24 m2s-1 at room temperature. Compared to conventional devices of graphene on Si/SiO2 substrates, such values are 10-20 times larger and result in a maximum spin diffusion length ~10 um in graphene achieved on such industry standard substrates, showing one order enhanced room temperature non-local spin signals. These devices exhibit state of the art spin diffusion, arising out of a distinct substrate topography that facilitates efficient spin transport, leading to a scalable, high-performance platform towards flexible 2D spintronics. Our innovation unlocks a new domain for the exploration of strain-dependent spin phenomena and paves the way for flexible graphene spin memory-logic units and surface mountable sensors.
△ Less
Submitted 31 July, 2018; v1 submitted 30 July, 2018;
originally announced July 2018.
-
Origin and evolution of surface spin current in topological insulators
Authors:
André Dankert,
Priyamvada Bhaskar,
Dmitrii Khokhriakov,
Isabel H. Rodrigues,
Bogdan Karpiak,
M. Venkata Kamalakar,
Sophie Charpentier,
Ion Garate,
Saroj P. Dash
Abstract:
The Dirac surface states of topological insulators offer a unique possibility for creating spin polarized charge currents due to the spin-momentum locking. Here we demonstrate that the control over the bulk and surface contribution is crucial to maximize the charge-to-spin conversion efficiency. We observe an enhancement of the spin signal due to surface-dominated spin polarization while freezing…
▽ More
The Dirac surface states of topological insulators offer a unique possibility for creating spin polarized charge currents due to the spin-momentum locking. Here we demonstrate that the control over the bulk and surface contribution is crucial to maximize the charge-to-spin conversion efficiency. We observe an enhancement of the spin signal due to surface-dominated spin polarization while freezing out the bulk conductivity in semiconducting Bi1.5Sb0.5Te1.7Se1.3 below 100K. Detailed measurements up to room temperature exhibit a strong reduction of the magnetoresistance signal between 2 and 100K, which we attribute to the thermal excitation of bulk carriers and to the electron-phonon coupling in the surface states. The presence and dominance of this effect up to room temperature is promising for spintronic science and technology.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Spin-Polarized Tunneling through Chemical Vapor Deposited Multilayer Molybdenum Disulfide
Authors:
André Dankert,
Parham Pashaei,
M. Venkata Kamalakar,
Anand P. S. Gaur,
Satyaprakash Sahoo,
Ivan Rungger,
Awadhesh Narayan,
Kapildeb Dolui,
Anamul Hoque,
Michel P. de Jong,
Ram S. Katiyar,
Stefano Sanvito,
Saroj P. Dash
Abstract:
The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 %…
▽ More
The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 % has been observed, corresponding to spin polarization of 5 - 10 % in the measured temperature range of 300 - 75 K. First principles calculations for ideal junctions results in a tunnel magnetoresistance up to 8 %, and a spin polarization of 26 %. The detailed measurements at different temperatures and bias voltages, and density functional theory calculations provide information about spin transport mechanisms in vertical multilayer MoS2 spin-valve devices. These findings form a platform for exploring spin functionalities in 2D semiconductors and understanding the basic phenomenon that control their performance.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Tunnel Magnetoresistance with Atomically Thin Two-Dimensional Hexagonal Boron Nitride Barriers
Authors:
André Dankert,
M. Venkata Kamalakar,
Abdul Wajid,
R. S. Patel,
Saroj P. Dash
Abstract:
The two-dimensional atomically thin insulator hexagonal boron nitride (h-BN) constitutes a new paradigm in tunnel based devices. A large band gap along with its atomically flat nature without dangling bonds or interface trap states makes it an ideal candidate for tunnel spin transport in spintronic devices. Here, we demonstrate the tunneling of spin-polarized electrons through large area monolayer…
▽ More
The two-dimensional atomically thin insulator hexagonal boron nitride (h-BN) constitutes a new paradigm in tunnel based devices. A large band gap along with its atomically flat nature without dangling bonds or interface trap states makes it an ideal candidate for tunnel spin transport in spintronic devices. Here, we demonstrate the tunneling of spin-polarized electrons through large area monolayer h-BN prepared by chemical vapor deposition in magnetic tunnel junctions. In ferromagnet/h-BN/ferromagnet heterostructures fabricated over a chip scale, we show tunnel magneto resistance at room temperature. Measurements at different bias voltages and on multiple devices with different ferromagnetic electrodes establish the spin polarized tunneling using h-BN barriers. These results open the way for integration of 2D monolayer insulating barriers in active spintronic devices and circuits operating at ambient temperature, and for further exploration of their properties and prospects.
△ Less
Submitted 13 November, 2014;
originally announced November 2014.
-
Room Temperature Electrical Detection of Spin Polarized Currents in Topological Insulators
Authors:
André Dankert,
Johannes Geurs,
M. Venkata Kamalakar,
Saroj P. Dash
Abstract:
Topological insulators (TIs) are a new class of quantum materials that exhibit spin momentum locking (SML) of massless Dirac fermions in the surface states. Usually optical methods, such as angle and spin-resolved photoemission spectroscopy, have been employed to observe the helical spin polarization in the surface states of three-dimensional (3D) TIs up to room temperatures. Recently, spin polari…
▽ More
Topological insulators (TIs) are a new class of quantum materials that exhibit spin momentum locking (SML) of massless Dirac fermions in the surface states. Usually optical methods, such as angle and spin-resolved photoemission spectroscopy, have been employed to observe the helical spin polarization in the surface states of three-dimensional (3D) TIs up to room temperatures. Recently, spin polarized surface currents in 3D TIs were detected by electrical methods using ferromagnetic (FM) contacts in a lateral spin-valve measurement geometry. However, probing the spin texture with such electrical approaches is so far limited to temperatures below 125K, which restricts its application potential. Here we demonstrate the room temperature electrical detection of the spin polarization on the surface of Bi$_2$Se$_3$ due to SML by employing spin sensitive FM tunnel contacts. The current-induced spin polarization on the Bi$_2$Se$_3$ surface is probed at room temperature by measuring a spin-valve signal while switching the magnetization direction of the FM detector. The spin signal increases linearly with current bias, reverses sign with current direction, exhibits a weak temperature dependence and decreases with higher TI thickness, as predicted theoretically. Our results demonstrate the electrical detection of the spin polarization on the surface of 3D TIs, which could lead to innovative spin-based quantum information technology at ambient temperatures.
△ Less
Submitted 30 October, 2014; v1 submitted 29 October, 2014;
originally announced October 2014.
-
Voltage-controlled inversion of tunnel magnetoresistance in epitaxial Nickel/Graphene/MgO/Cobalt junctions
Authors:
F. Godel,
M. Venkata Kamalakar,
B. Doudin,
Y. Henry,
D. Halley,
J. -F. Dayen
Abstract:
We report on the fabrication and characterization of vertical spin-valve structures using a thick epitaxial MgO barrier as spacer layer and a graphene-passivated Ni film as bottom ferromagnetic electrode. The devices show robust and scalable tunnel magnetoresistance, with several changes of sign upon varying the applied bias voltage. These findings are explained by a model of phonon-assisted trans…
▽ More
We report on the fabrication and characterization of vertical spin-valve structures using a thick epitaxial MgO barrier as spacer layer and a graphene-passivated Ni film as bottom ferromagnetic electrode. The devices show robust and scalable tunnel magnetoresistance, with several changes of sign upon varying the applied bias voltage. These findings are explained by a model of phonon-assisted transport mechanisms that relies on the peculiarity of the band structure and spin density of states at the hybrid graphene|Ni interface.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Enhanced Tunnel Spin Injection into Graphene using Chemical Vapor Deposited Hexagonal Boron Nitride
Authors:
M. Venkata Kamalakar,
André Dankert,
Johan Bergsten,
Tommy Ive,
Saroj P. Dash
Abstract:
The van der Waals heterostructures of two-dimensional (2D) atomic crystals constitute a new paradigm in nanoscience. Hybrid devices of graphene with insulating 2D hexagonal boron nitride (h-BN) have emerged as promising nanoelectronic architectures through demonstrations of ultrahigh electron motilities and charge-based tunnel transistors. Here, we expand the functional horizon of such 2D material…
▽ More
The van der Waals heterostructures of two-dimensional (2D) atomic crystals constitute a new paradigm in nanoscience. Hybrid devices of graphene with insulating 2D hexagonal boron nitride (h-BN) have emerged as promising nanoelectronic architectures through demonstrations of ultrahigh electron motilities and charge-based tunnel transistors. Here, we expand the functional horizon of such 2D materials demonstrating the quantum tunneling of spin-polarized electrons through atomic planes of CVD grown h-BN. We report excellent tunneling behavior of h-BN layers together with tunnel spin injection and transport in graphene using ferromagnet/h-BN contacts. Employing h-BN tunnel contacts, we observe enhancements in both spin signal amplitude and lifetime by an order of magnitude. We demonstrate spin transport and precession over micrometer-scale distances with spin lifetime up to 0.46 nanosecond. Our results and complementary magnetoresistance calculations illustrate that CVD h-BN tunnel barrier provides a reliable, reproducible and alternative approach to address the conductivity mismatch problem for spin injection into graphene.
△ Less
Submitted 23 June, 2014;
originally announced June 2014.
-
Engineering Schottky Barrier in Black Phosphorus field effect devices for spintronic applications
Authors:
M. Venkata Kamalakar,
B. N Madhushankar,
André Dankert,
Saroj P. Dash
Abstract:
Black phosphorous (BP) is is recently unveiled as a promising two-dimensional direct bandgap semiconducting material. Here, we report the ambipolar field effect transistor behavior of multilayers of BP with ferromagnetic tunnel contacts. We observe a reduced of Schottky barrier < 50 meV by using TiO${_2}$/Co contacts, which could be further tuned by gate voltages. Eminently a good transistor perfo…
▽ More
Black phosphorous (BP) is is recently unveiled as a promising two-dimensional direct bandgap semiconducting material. Here, we report the ambipolar field effect transistor behavior of multilayers of BP with ferromagnetic tunnel contacts. We observe a reduced of Schottky barrier < 50 meV by using TiO${_2}$/Co contacts, which could be further tuned by gate voltages. Eminently a good transistor performance is achieved in BP devices, with drain current modulation on the order of four to six orders of magnitude. The charge carrier mobility is found to be $\sim$ 155 and 0.18 cm${^2}$ V${^{-1}}$ s${^{-1}}$ for holes and electrons respectively at room temperature. Furthermore, magnetoresistance calculations reveal that the resistances of the BP device with applied gate voltages are in the appropriate range for injection and detection of spin polarized holes. Our results demonstrate the prospect of engineering BP nanolayered devices for efficient nanoelectronic and spintronic applications.
△ Less
Submitted 4 July, 2014; v1 submitted 17 June, 2014;
originally announced June 2014.
-
Spin Transport and Precession in Graphene measured by Nonlocal and Three-Terminal Methods
Authors:
André Dankert,
Mutta Venkata Kamalakar,
Johan Bergsten,
Saroj P. Dash
Abstract:
We investigate the spin transport and precession in graphene by using the Hanle effect in nonlocal and threeterminal measurement geometries. Identical spin lifetimes, spin diffusion lengths and spin polarizations are observed in graphene devices for both techniques over a wide range of temperatures. The magnitude of the spin signals is well explained by spin transport models. These observations ru…
▽ More
We investigate the spin transport and precession in graphene by using the Hanle effect in nonlocal and threeterminal measurement geometries. Identical spin lifetimes, spin diffusion lengths and spin polarizations are observed in graphene devices for both techniques over a wide range of temperatures. The magnitude of the spin signals is well explained by spin transport models. These observations rules out any signal enhancements or additional scattering mechanisms at the interfaces for both geometries. This validates the applicability of both the measurement methods for graphene based spintronics devices and their reliable extractions of spin parameters.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Electrical transport properties of nanostructured ferromagnetic perovskite oxides La_0.67Ca_0.33MnO_3 and La_0.5Sr_0.5CoO_3 at low temperatures (5 K > T >0.3 K) and high magnetic field
Authors:
Tapati Sarkar,
M. Venkata Kamalakar,
A. K. Raychaudhuri
Abstract:
We report a comprehensive study of the electrical and magneto-transport properties of nanocrystals of La_0.67Ca_0.33MnO_3 (LCMO) (with size down to 15 nm) and La_0.5Sr_0.5CoO_3 (LSCO) (with size down to 35 nm) in the temperature range 0.3 K to 5 K and magnetic fields upto 14 T. The transport, magnetotransport and non-linear conduction (I-V curves) were analysed using the concept of Spin Polarized…
▽ More
We report a comprehensive study of the electrical and magneto-transport properties of nanocrystals of La_0.67Ca_0.33MnO_3 (LCMO) (with size down to 15 nm) and La_0.5Sr_0.5CoO_3 (LSCO) (with size down to 35 nm) in the temperature range 0.3 K to 5 K and magnetic fields upto 14 T. The transport, magnetotransport and non-linear conduction (I-V curves) were analysed using the concept of Spin Polarized Tunnelling in the presence of Coulomb blockade. The activation energy of transport, Δ, was used to estimate the tunnelling distances and the inverse decay length of the tunnelling wave function (χ) and the height of the tunnelling barrier (Φ_B). The magnetotransport data were used to find out the magnetic field dependences of these tunnelling parameters. The data taken over a large magnetic field range allowed us to separate out the MR contributions at low temperatures arising from tunnelling into two distinct contributions. In LCMO, at low magnetic field, the transport and the MR are dominated by the spin polarization, while at higher magnetic field the MR arises from the lowering of the tunnel barrier by the magnetic field leading to an MR that does not saturate even at 14 T. In contrast, in LSCO, which does not have substantial spin polarization, the first contribution at low field is absent, while the second contribution related to the barrier height persists. The idea of inter-grain tunnelling has been validated by direct measurements of the non-linear I-V data in this temperature range and the I-V data was found to be strongly dependent on magnetic field. We made the important observation that a gap like feature (with magnitude ~ E_C, the Coulomb charging energy) shows up in the conductance g(V) at low bias for the systems with smallest nanocrystal size at lowest temperatures (T < 0.7 K). The gap closes as the magnetic field and the temperature are increased.
△ Less
Submitted 17 March, 2012;
originally announced March 2012.
-
Synthesis, Characterization and Investigation of Electrical Transport in Metal Nanowires and Nanotubes
Authors:
M. Venkata Kamalakar
Abstract:
This thesis is dedicated to the synthesis, characterization and the study of electrical transport through metal nanowires and nanotubes. The metal nanowires(Ni, Cu) and nanotubes(Cu) are synthesised by electrochemical deposition in nanoporous templates. In the synthesis front, electrochemical deposition schemes were developed to achieve single crystallinity and synthesis of tubular nanostructures.…
▽ More
This thesis is dedicated to the synthesis, characterization and the study of electrical transport through metal nanowires and nanotubes. The metal nanowires(Ni, Cu) and nanotubes(Cu) are synthesised by electrochemical deposition in nanoporous templates. In the synthesis front, electrochemical deposition schemes were developed to achieve single crystallinity and synthesis of tubular nanostructures. The nanostructures are characterized using structural characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The magnetic nanowires are also characterized using VSM and SQUID magnetometers. The electrical transport measurements performed in a wide range of temperature (3K-700K) to understand the interactions of electrons with phonon, magnon and surface when the electron mean free path is limited by the dimension of these nanostructures. The measurements were performed in the wide range of temperature to encompass and study the ferromagnetic to paramagnetic phase transition in case of magnetic nanowires. We observed systematic scaling of these interactions and the characteristic temperatures such as the Debye temperature(θ_R) and Curie temperature(T_C) as a function of diameter. We also observed how these interactions change as we move from nanowires to nanotubes of metals.
△ Less
Submitted 24 October, 2011;
originally announced October 2011.
-
Resistance fluctuations and 1/f noise in single crystalline Ni nanowires
Authors:
Sudeshna Samanta,
M. Venkata Kamalakar,
A. K. Raychaudhuri
Abstract:
We measured the low frequency (10mHz < f < 10Hz) resistance fluctuations (Noise) in single crystalline ferromagnetic Ni nanowires (diameter ~35nm) in the temperature range 80K-300K. The noise spectral power shows 1/f dependence. The nanowires in an applied magnetic field show negative magetoresistance that saturates for H <= HC. The noise spectral power shows a reduction in low applied field and…
▽ More
We measured the low frequency (10mHz < f < 10Hz) resistance fluctuations (Noise) in single crystalline ferromagnetic Ni nanowires (diameter ~35nm) in the temperature range 80K-300K. The noise spectral power shows 1/f dependence. The nanowires in an applied magnetic field show negative magetoresistance that saturates for H <= HC. The noise spectral power shows a reduction in low applied field and becomes field independent for H >= HC. This indicates that a part of the observed 1/f noise arises from magnetic origin. The magnetic part is associated with thermally activated domain wall fluctuations that couples to the resistance fluctuations.
△ Less
Submitted 23 June, 2009;
originally announced June 2009.
-
Temperature dependent electrical resistivity of a single strand of ferromagnetic single crystalline nanowire
Authors:
M. Venkata Kamalakar,
A. K. Raychaudhuri,
Xueyong Wei,
Jason Teng,
Philip D. Prewett
Abstract:
We have measured the electrical resistivity of a single strand of a ferromagnetic Ni nanowire of diameter 55 nm using a 4-probe method in the temperature range 3 K-300 K. The wire used is chemically pure and is a high quality oriented single crystalline sample in which the temperature independent residual resistivity is determined predominantly by surface scattering. Precise evaluation of the te…
▽ More
We have measured the electrical resistivity of a single strand of a ferromagnetic Ni nanowire of diameter 55 nm using a 4-probe method in the temperature range 3 K-300 K. The wire used is chemically pure and is a high quality oriented single crystalline sample in which the temperature independent residual resistivity is determined predominantly by surface scattering. Precise evaluation of the temperature dependent resistivity ($ρ$) allowed us to identify quantitatively the electron-phonon contribution (characterized by a Debye temperature $θ_R$) as well as the spin-wave contribution which is significantly suppressed upon size reduction.
△ Less
Submitted 21 June, 2009;
originally announced June 2009.
-
Electrical resistance of Ni nanowires (diameter greater than or equal to 20 nm) near the Curie Temperatures
Authors:
M. Venkata Kamalakar,
A. K. Raychaudhuri
Abstract:
In this letter we report electrical transport measurements on nickel nanowires of diameters down to 20 nm in the region close to its paramagnetic-ferromagnetic transition temperature T_C (reduced temperature|t| less than or equal to 0.001). The data analysis done in the frame work of critical behavior of resistance near TC shows that the critical behavior persists even down to the lowest diamete…
▽ More
In this letter we report electrical transport measurements on nickel nanowires of diameters down to 20 nm in the region close to its paramagnetic-ferromagnetic transition temperature T_C (reduced temperature|t| less than or equal to 0.001). The data analysis done in the frame work of critical behavior of resistance near TC shows that the critical behavior persists even down to the lowest diameter wire of 20 nm. However, there is a suppression of the critical behavior of the resistivity as measured by the critical exponents and the parameters quantifying the anomaly. The spin system shows approach to a quasi one-dimensional spin system.
△ Less
Submitted 27 November, 2008;
originally announced November 2008.