Showing 1–50 of 60 results for author: Kaganovich, I D

Methods for color center preserving hydrogen-termination of diamond

Authors: Daniel J. McCloskey, Daniel Roberts, Lila V. H. Rodgers, Yuri Barsukov, Igor D. Kaganovich, David A. Simpson, Nathalie P. de Leon, Alastair Stacey, Nikolai Dontschuk

Abstract: Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near-surface fluorescent color centers, an essential process in fabricating devices such as diamond field-effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these case… ▽ More Chemical functionalization of diamond surfaces by hydrogen is an important method for controlling the charge state of near-surface fluorescent color centers, an essential process in fabricating devices such as diamond field-effect transistors and chemical sensors, and a required first step for realizing families of more complex terminations through subsequent chemical processing. In all these cases, termination is typically achieved using hydrogen plasma sources which can etch or damage the diamond as well as deposited materials or embedded colour centers. This work explores alternative methods for lower-damage hydrogenation of diamond surfaces, specifically the annealing of diamond samples in high-purity, non-explosive mixtures of nitrogen and hydrogen gas, and the exposure of samples to microwave hydrogen plasmas in the absence of intentional stage heating. The effectiveness of these methods are characterized by x-ray photoelectron spectroscopy, and comparison of the results to density-functional modelling of the surface hydrogenation energetics implicates surface oxygen ligands as the primary factor limiting the termination quality of annealed samples. Finally, photoluminescence spectroscopy is used to verify that both the annealing and reduced sample temperature plasma methods are non-destructive to near-surface ensembles of nitrogen-vacancy centers, in stark contrast to plasma treatments which use heated sample stages. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 24 pages, 4 figures

Quantum Chemistry Model of Surface Reactions and Kinetic Model of Diamond Growth: Effects of CH3 Radicals and C2H2 Molecules at Low-Temperatures CVD

Authors: Yuri Barsukov, Igor D. Kaganovich, Mikhail Mokrov, Alexander Khrabry

Abstract: The objective of this study is to explore conditions that facilitate a significant reduction in substrate temperature during diamond growth. The typical temperature for this process is around 1200K; we aim to reduce it to a much lower level. To achieve this, we need to understand processes that limit the diamond growth at low temperatures. Therefore, we developed a detailed chemical kinetic model… ▽ More The objective of this study is to explore conditions that facilitate a significant reduction in substrate temperature during diamond growth. The typical temperature for this process is around 1200K; we aim to reduce it to a much lower level. To achieve this, we need to understand processes that limit the diamond growth at low temperatures. Therefore, we developed a detailed chemical kinetic model to analyze diamond growth on the (100) surface. This model accounts for variations in substrate temperature and gas composition. Using an ab initio quantum chemistry, we calculated the reaction rates of all major gas phase reactants with the diamond surface, totaling 91 elemental surface reactions. Consistent with previous studies, the model identifies that CH3 is a major precursor of diamond growth, and the contribution from C2H2 to the growth is significantly smaller. However, C2H2 can also contribute to forming a sp2-phase instead of a sp3-phase, and this process becomes dominant below a critical temperature. As a result, C2H2 flux inhibits diamond growth at low temperatures. To quantify this deleterious process, we developed a new mechanism for sp2-phase nucleation on the (100) surface. Similar to the so-called HACA mechanism for soot formation it involves hydrogen abstraction and C2H2 addition. Consequently, optimal low-temperature CVD growth could be realized in a reactor designed to maximize the CH3 radical production, while minimizing the generation of C2H2 and other sp and sp2 hydrocarbons. △ Less

Submitted 5 May, 2024; originally announced May 2024.

Comments: 60 pages, 31 figures

Establishing Criteria for the Transition from Kinetic to Fluid Modeling in Hollow Cathode Analysis

Authors: Willca Villafana, Andrew T. Powis, Sarveshwar Sharma, Igor D. Kaganovich, Alexander V. Khrabrov

Abstract: In this study, we conduct 2D3V Particle-In-Cell simulations of hollow cathodes, encompassing both the channel and plume region, with an emphasis on plasma switch applications. The plasma in the hollow cathode channel can exhibit kinetic effects depending on how fast electrons emitted from the insert are thermalized via Coulomb collisions. The criterion that determines whether the plasma operates i… ▽ More In this study, we conduct 2D3V Particle-In-Cell simulations of hollow cathodes, encompassing both the channel and plume region, with an emphasis on plasma switch applications. The plasma in the hollow cathode channel can exhibit kinetic effects depending on how fast electrons emitted from the insert are thermalized via Coulomb collisions. The criterion that determines whether the plasma operates in a Duid or kinetic regime is given as follows. When Coulomb collisions occur at a much greater rate than ionization or excitation events, the Electron Energy Distribution Function relaxes to aMaxwellian distribution and the plasmawithin the channel can be describedwith aDuidmodel. In contrast, if inelastic processes are much faster, then the Electron Energy Distribution Function in the channel exhibits a notable high-energy tail, and a kinetic treatment is required. This criterion is applied to other kinds of hollow cathodes from the literature, revealing that a Duid approach is suitable for most electric propulsion applications, whereas a kinetic treatment might be necessary for plasma switches. Additionally, amomentumbalance reveals that a diffusion equation is sufAcient to predict the plasma plume expansion, a crucial input in the design of hollow cathodes for plasma switch applications. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Modeling the low-pressure high-voltage branch of the Paschen curve for hydrogen and deuterium

Authors: Alexander V. Khrabrov, David. J. Smith, Igor D. Kaganovich

Abstract: A physical and numerical model of the Townsend discharge in molecular hydrogen and deuterium has been developed to meet the needs of designing a plasma-based switching device for power grid application. The model allows to predict the low-pressure branch of the Paschen curve for applied voltage in the range of several hundred kiloVolts. In the regime of interest, electrons are in a runaway state a… ▽ More A physical and numerical model of the Townsend discharge in molecular hydrogen and deuterium has been developed to meet the needs of designing a plasma-based switching device for power grid application. The model allows to predict the low-pressure branch of the Paschen curve for applied voltage in the range of several hundred kiloVolts. In the regime of interest, electrons are in a runaway state and ionization by ions and fast neutrals sustains the discharge. It was essential to correctly account for both gas-phase and surface interactions (electron emission and electron back-scattering), especially in terms of their dependence on particle energy. The model yields results consistent with prior data obtained for lower voltage. The three-species (electrons, ions and fast neutrals) model successfully captures the essential physics of the process. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: 21 pages, 13 figures

Numerical thermalization in 2D PIC simulations: Practical estimates for low temperature plasma simulations

Authors: Sierra Jubin, Andrew Tasman Powis, Willca Villafana, Dmytro Sydorenko, Shahid Rauf, Alexander V. Khrabrov, Salman Sarwar, Igor D. Kaganovich

Abstract: The process of numerical thermalization in particle-in-cell (PIC) simulations has been studied extensively. It is analogous to Coulomb collisions in real plasmas, causing particle velocity distributions (VDFs) to evolve towards a Maxwellian as macroparticles experience polarization drag and resonantly interact with the fluctuation spectrum. This paper presents a practical tutorial on the effects o… ▽ More The process of numerical thermalization in particle-in-cell (PIC) simulations has been studied extensively. It is analogous to Coulomb collisions in real plasmas, causing particle velocity distributions (VDFs) to evolve towards a Maxwellian as macroparticles experience polarization drag and resonantly interact with the fluctuation spectrum. This paper presents a practical tutorial on the effects of numerical thermalization in 2D PIC applications. Scenarios of interest include simulations which must be run for many thousands of plasma periods and contain a population of cold electrons that leave the simulation space very slowly. This is particularly relevant to many low temperature plasma discharges and materials processing applications. We present numerical drag and diffusion coefficients and their associated timescales for a variety of grid resolutions, discussing the circumstances under which the electron VDF is modified by numerical thermalization. Though the effects described here have been known for many decades, direct comparison of analytically derived, velocity-dependent numerical relaxation timescales to those of other relevant processes has not often been applied in practice due to complications that arise in calculating thermalization rates in 1D simulations. Using these comparisons, we estimate the impact of numerical thermalization in several example low temperature plasma applications including capacitively coupled plasma (CCP) discharges, inductively coupled plasma (ICP) discharges, beam plasmas, and hollow cathode discharges. Finally, we discuss possible strategies for mitigating numerical relaxation effects in 2D PIC simulations. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Numerical Method for Modeling Nucleation and Growth of Particles that Prevents Numerical Diffusion

Authors: A. Khrabry, I. D. Kaganovich, S. Raman, E. Turkoz, D. Graves

Abstract: State-of-the-art models for aerosol particle nucleation and growth from a cooling vapor primarily use a nodal method to numerically solve particle growth kinetics. In this method, particles that are smaller than the critical size are omitted from consideration, because they are thermodynamically unfavorable. This omission is based on the assumption that most of the newly formed particles are above… ▽ More State-of-the-art models for aerosol particle nucleation and growth from a cooling vapor primarily use a nodal method to numerically solve particle growth kinetics. In this method, particles that are smaller than the critical size are omitted from consideration, because they are thermodynamically unfavorable. This omission is based on the assumption that most of the newly formed particles are above the critical size and that the subcritical-size particles are not important to take into account. Due to the nature of the nodal method, it suffers from the numerical diffusion, which can cause an artificial broadening of the cluster size distribution leading to significant overestimation of the number of large-size particles. To address these issues, we propose a more accurate numerical method that explicitly models particles of all sizes, and uses a special numerical scheme that eliminates the numerical diffusion. We extensively compare this novel method to the commonly used nodal solver of the General Dynamics Equation (GDE) for particle growth and demonstrate that it offers GDE solutions with higher accuracy without generating numerical diffusion. Incorporating small subcritical clusters into the solution is crucial for: 1) more precise determination of the entire shape of the particle size distribution function and 2) wider applicability of the model to experimental studies with non-monotonic temperature variations leading to particle evaporation. The computational code implementing this numerical method in Python is available upon request. △ Less

Submitted 10 January, 2024; originally announced January 2024.

Boron adatom adsorption on graphene: A case study in computational chemistry methods for surface interactions

Authors: S. Jubin, A. Rau, Y. Barsukov, S. Ethier, I. D. Kaganovich

Abstract: Though weak surface interactions and adsorption can play an important role in plasma processing and materials science, they are not necessarily simple to model. A boron adatom adsorbed on a graphene sheet serves as a case study for how carefully one must select the correct technique from a toolbox of computational chemistry methods. Using a variety of molecular dynamics potentials and density func… ▽ More Though weak surface interactions and adsorption can play an important role in plasma processing and materials science, they are not necessarily simple to model. A boron adatom adsorbed on a graphene sheet serves as a case study for how carefully one must select the correct technique from a toolbox of computational chemistry methods. Using a variety of molecular dynamics potentials and density functional theory functionals, we evaluate the adsorption energy, investigate barriers to adsorption and migration, calculate corresponding reaction rates, and show that a surprisingly high level of theory may be necessary to verify that the system is described correctly. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Journal ref: Front. Phys. 10:908694 (2022)

Compact and accurate chemical mechanism for methane pyrolysis with PAH growth

Authors: Alexander Khrabry, Igor D. Kaganovich, Yuri Barsukov, Sumathy Raman, Emre Turkoz, David Graves

Abstract: A reliable and compact chemical mechanism of gas-phase methane pyrolysis leading to formation of large polycyclic aromatic hydrocarbon (PAH) molecules has been developed. This model is designed for studies of carbon nanostructure synthesis such as carbon black and graphene flakes, including soot growth kinetics. Methane pyrolysis with carbon nanostructure synthesis is a two-stage process where con… ▽ More A reliable and compact chemical mechanism of gas-phase methane pyrolysis leading to formation of large polycyclic aromatic hydrocarbon (PAH) molecules has been developed. This model is designed for studies of carbon nanostructure synthesis such as carbon black and graphene flakes, including soot growth kinetics. Methane pyrolysis with carbon nanostructure synthesis is a two-stage process where conversion of CH4 to C2H2 precedes the growth of PAH molecules from acetylene. We present a single chemical mechanism that accurately describes both stages. We have constructed a compact and accurate chemical mechanism capable of modeling both stages of methane pyrolysis based on the ABF mechanism which was expanded with most prominent reaction pathways from the mechanism by Tao for small PAH molecules and HACA pathways for larger PAH molecules, up to 37 aromatic rings. The resulting mechanism was validated through comparison to multiple available sets of experimental data. Good agreement with the experimental data for both processes was obtained. Performance of the mechanism was tested for pyrolysis of methane-rich mixtures under long residence times leading to abundant formation of PAH molecules. It is shown that the inclusion of larger PAH species (up to A37) in the chemical mechanism is important for accurate prediction of the fraction of carbon converted to PAH molecules and, correspondingly, residual fraction of acetylene in the mixture. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Accuracy of the Explicit Energy-Conserving Particle-in-Cell Method for Under-resolved Simulations of Capacitively Coupled Plasma Discharges

Authors: Andrew T. Powis, Igor D. Kaganovich

Abstract: The traditional explicit electrostatic momentum-conserving Particle-in-cell algorithm requires strict resolution of the electron Debye length to deliver numerical accuracy. The explicit electrostatic energy-conserving Particle-in-Cell algorithm alleviates this constraint with minimal modification to the traditional algorithm, retaining its simplicity and ease of parallelization and acceleration on… ▽ More The traditional explicit electrostatic momentum-conserving Particle-in-cell algorithm requires strict resolution of the electron Debye length to deliver numerical accuracy. The explicit electrostatic energy-conserving Particle-in-Cell algorithm alleviates this constraint with minimal modification to the traditional algorithm, retaining its simplicity and ease of parallelization and acceleration on modern supercomputing architectures. In this article we apply the algorithm to model a one-dimensional radio-frequency capacitively coupled plasma discharge relevant to industrial applications. The energy-conserving approach closely matches the results from the momentum-conserving algorithm and retains accuracy even for cell sizes up to 8x the electron Debye length. For even larger cells the algorithm loses accuracy due to poor resolution of steep gradients in the radio-frequency sheath. This can be amended by introducing a non-uniform grid, which allows for accurate simulations with 9.4x fewer cells than the fully resolved case, an improvement that will be compounded in higher-dimensional simulations. We therefore consider the explicit energy-conserving algorithm as a promising approach to significantly reduce the computational cost of full-scale device simulations and a pathway to delivering kinetic simulation capabilities of use to industry. △ Less

Submitted 30 August, 2023; v1 submitted 24 August, 2023; originally announced August 2023.

Direct Implicit and Explicit Energy-Conserving Particle-in-Cell Methods for Modeling of Capacitively-Coupled Plasma Devices

Authors: Haomin Sun, Soham Banerjee, Sarveshwar Sharma, Andrew Tasman Powis, Alexander V. Khrabrov, Dmytro Sydorenko, Jian Chen, Igor D. Kaganovich

Abstract: Achieving large-scale kinetic modelling is a crucial task for the development and optimization of modern plasma devices. With the trend of decreasing pressure in applications such as plasma etching, kinetic simulations are necessary to self-consistently capture the particle dynamics. The standard, explicit, electrostatic, momentum-conserving Particle-In-Cell method suffers from restrictive stabili… ▽ More Achieving large-scale kinetic modelling is a crucial task for the development and optimization of modern plasma devices. With the trend of decreasing pressure in applications such as plasma etching, kinetic simulations are necessary to self-consistently capture the particle dynamics. The standard, explicit, electrostatic, momentum-conserving Particle-In-Cell method suffers from restrictive stability constraints on spatial cell size and temporal time step, requiring resolution of the electron Debye length and electron plasma period respectively. This results in a very high computational cost, making the technique prohibitive for large volume device modeling. We investigate the Direct Implicit algorithm and the explicit Energy Conserving algorithm as alternatives to the standard approach, both of which can reduce computational cost with a minimal (or controllable) impact on results. These algorithms are implemented into the well-tested EDIPIC-2D and LTP-PIC codes, and their performance is evaluated via 2D capacitively coupled plasma discharge simulations. The investigation revels that both approaches enable the utilization of cell sizes larger than the Debye length, resulting in reduced runtime, while incurring only minor inaccuracies in plasma parameters. The Direct Implicit method also allows for time steps larger than the electron plasma period, however care must be taken to avoid numerical heating or cooling. It is demonstrated that by appropriately adjusting the ratio of cell size to time step, it is possible to mitigate this effect to an acceptable level. △ Less

Submitted 31 August, 2023; v1 submitted 2 June, 2023; originally announced June 2023.

Electron heating in a current-driven turbulence as a result of nonlinear interaction of electron- and ion-acoustic waves

Authors: Jian Chen, Alexander V. Khrabrov, Igor D. Kaganovich, He-** Li

Abstract: We study electron heating in collisionless current-driven turbulence due to the nonlinear interactions between electron- and ion-acoustic waves. PIC simulation results show that due to a large difference between the electron and ion mean velocities the Buneman instability excites large-amplitude ion-acoustic waves, which strongly modifies the electron velocity distribution function, leading to a s… ▽ More We study electron heating in collisionless current-driven turbulence due to the nonlinear interactions between electron- and ion-acoustic waves. PIC simulation results show that due to a large difference between the electron and ion mean velocities the Buneman instability excites large-amplitude ion-acoustic waves, which strongly modifies the electron velocity distribution function, leading to a secondary instability that generates fast electron-acoustic waves; and in this process, a giant electron hole is ultimately created. This giant electron hole is responsible for strong electron heating due to phase mixing. The numerical simulation results are consistent with the previous observations and provide insight into the key processes responsible for electron heating and the generation of nonlinear waves in a collisionless current-driven instability. △ Less

Submitted 1 August, 2022; originally announced August 2022.

Electron Modulational Instability in the Strong Turbulent Regime for an Electron Beam Propagating in Background Plasma

Authors: Haomin Sun, Jian Chen, Igor D. Kaganovich, Alexander Khrabrov, Dmytro Sydorenko

Abstract: We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an Electron Modulational Instability that rapidly creates a local Langmuir wave packet, which in i… ▽ More We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an Electron Modulational Instability that rapidly creates a local Langmuir wave packet, which in its turn produces local charge separation and strong ion density perturbations because of the action of the ponderomotive force, such that the beam-plasma wave interaction stops being resonant. Three evolution stages of the process and observed periodic burst features are discussed. Different physical regimes in the plasma and beam parameter space are demonstrated for the first time. △ Less

Submitted 2 August, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comments: 20 pages, 3 figures

Physical Regimes of Electrostatic Wave-Wave nonlinear interactions generated by an Electron Beam Propagating in a Background Plasma

Authors: Haomin Sun, Jian Chen, Igor D. Kaganovich, Alexander Khrabrov, Dmytro Sydorenko

Abstract: Electron-beam plasma interaction has long been a topic of great interest. Despite the success of Quasi-Linear (QL) theory and Weak Turbulence (WT) theory, their validities are limited by the requirement of sufficiently dense mode spectrum and small wave amplitude. In this paper, we extensively studied the collective processes of a mono-energetic electron beam emitted from a thermionic cathode prop… ▽ More Electron-beam plasma interaction has long been a topic of great interest. Despite the success of Quasi-Linear (QL) theory and Weak Turbulence (WT) theory, their validities are limited by the requirement of sufficiently dense mode spectrum and small wave amplitude. In this paper, we extensively studied the collective processes of a mono-energetic electron beam emitted from a thermionic cathode propagating through a cold plasma by performing a large number of high resolution two-dimensional (2D) particle-in-cell (PIC) simulations and using analytical theories. We confirm that the initial stage of two-stream instability is saturated due to well-known wave-trap** mechanism. Further evolution occurs due to strong wave-wave nonlinear processes. We show that the beam-plasma interaction can be classified into four different physical regimes in the parameter space for the plasma and beam parameters. The differences between the different regimes are analyzed in detail. For the first time, we identified a new regime in strong Langmuir turbulence featured by what we call Electron Modulational Instability (EMI) that could create a local Langmuir wave packet growing faster than the ion plasma frequency. Ions do not have time to respond to EMI in the initial growing stage. On a longer timescale, the action of the ponderomotive force produces very strong ion density perturbations, and eventually the beam-plasma wave interaction stops being resonant due to strong ion density perturbations. Consequently, in this EMI regime, electron beam-plasma interaction occurs in a periodic (intermittent) process. The beams are strongly scattered by waves, and the Langmuir wave spectrum is significantly broadened, which in turn gives rise to strong heating of bulk electrons. A resulting kappa distribution and a wave-energy spectrum, E^2 (k)~k^(-5), are observed in the strong turbulent regime. △ Less

Submitted 3 August, 2022; v1 submitted 5 April, 2022; originally announced April 2022.

Comments: 71 pages, 20 figures

Excitation of electrostatic solitary waves and surface waves in ion beam neutralization process

Authors: Nakul Nuwal, Igor D. Kaganovich, Deborah A. Levin

Abstract: Unusually long electrostatic solitary waves (ESWs) are discovered in 2D and 3D Particle-in-Cell studies of the process of ion beam neutralization by electron emission from filaments. These ESWs are long because trapped and untrapped electron density perturbations nearly compensate each other. Surface waves were discovered in the process of neutralization but were only observed in 3D simulations. T… ▽ More Unusually long electrostatic solitary waves (ESWs) are discovered in 2D and 3D Particle-in-Cell studies of the process of ion beam neutralization by electron emission from filaments. These ESWs are long because trapped and untrapped electron density perturbations nearly compensate each other. Surface waves were discovered in the process of neutralization but were only observed in 3D simulations. This is because the phase velocity of surface waves in a 2D geometry is higher than in 3D giving the high-energy electrons generated upstream near the electron source enough energy to excite such waves only in 3D cylindrical beams. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Kinetic modeling of three-dimensional electrostatic-solitary and surface waves in beam neutralization

Authors: Nakul Nuwal, Deborah A. Levin, Igor D. Kaganovich

Abstract: This work studies the fundamental plasma processes involved in the neutralization of an ion beam's space-charge by electrons emitted by a filament using Particle-in-Cell simulations. While filament neutralization is economical, previous experiments have shown that a variety of waves become excited in this process that limit the space-charge neutralization. In this work, the formation and movement… ▽ More This work studies the fundamental plasma processes involved in the neutralization of an ion beam's space-charge by electrons emitted by a filament using Particle-in-Cell simulations. While filament neutralization is economical, previous experiments have shown that a variety of waves become excited in this process that limit the space-charge neutralization. In this work, the formation and movement of electrostatic solitary waves(ESWs), which have low dissipation rates, are characterized for 2D planar and 3D cylindrical beams and are observed to generate waves that survive for a long time and slow the process of beam neutralization. Further, through a 1D Bernstein-Greene-Kruskal (BGK) analysis, we find that the non-Maxwellian nature of the beam electrons gives rise to large-sized ESWs that are not predicted by theory which assumes that the electrons may be described by a Maxwellian distribution. Our PIC simulations are sufficiently sensitive to be able to resolve important three-dimensional effects in a 3D cylindrical geometry that lead to the excitation of Trivelpiece-Gould surface waves due to high-energy electrons present at the beginning of neutralization. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Collective Effects and Intense Beam-Plasma Interactions in Ion-Beam-Driven High Energy Density Matter and Inertial Fusion Energy

Authors: Igor D. Kaganovich, Edward A. Startsev, Hong Qin, Erik Gilson, Thomas Schenkel, Jean-Luc Vay, Ed P. Lee, William Waldron, Roger Bangerter, Arun Persaud, Peter Seidl, Qing Ji, Alex Friedman, Dave P. Grote, John Barnard

Abstract: For the successful generation of ion-beam-driven high energy density matter and heavy ion fusion energy, intense ion beams must be transported and focused onto a target with small spot size. One of the successful approaches to achieve this goal is to accelerate and transport intense ion charge bunches in an accelerator and then focus the charge bunches ballistically in a section of the accelerator… ▽ More For the successful generation of ion-beam-driven high energy density matter and heavy ion fusion energy, intense ion beams must be transported and focused onto a target with small spot size. One of the successful approaches to achieve this goal is to accelerate and transport intense ion charge bunches in an accelerator and then focus the charge bunches ballistically in a section of the accelerator that contains a neutralizing background plasma. This requires the ability to control space-charge effects during un-neutralized (non-neutral) beam transport in the accelerator and transport sections, and the ability to effectively neutralize the space charge and current by propagating the beam through background plasma. As the beam intensity and energy are increased in future heavy ion fusion (HIF) drivers and Fast Ignition (FI) approaches, it is expected that nonlinear processes and collective effects will become much more pronounced than in previous experiments. Making use of 3D electromagnetic particle-in-cell simulation (PIC) codes (BEST, WARP-X, and LTP-PIC, etc.), the theory and modelling studies will be validated by comparing with experimental data on the 100kV Princeton Advanced Test Stand, and future experiments at the FAIR facility. The theoretical predictions that are developed will be scaled to the beam and plasma parameters relevant to heavy ion fusion drivers and Fast Ignition scenarios. Therefore, the theoretical results will also contribute significantly toward the long-term goal of fusion energy production by ion-beam-driven inertial confinement fusion. △ Less

Submitted 31 January, 2022; originally announced January 2022.

Comments: White paper submitted to the IFE Science & Technology Community Strategic Planning Workshop https://lasers.llnl.gov/nif-workshops/ife-workshop-2022/white-papers (2022)

Collisionless Adiabatic Afterglow

Authors: Alexander V. Khrabrov, Igor D. Kaganovich, Jian Chen, Heng Guo

Abstract: We study, by numerical and analytical means, the evolution of a uniform one-dimensional collisionless plasma initiated between plane absorbing walls. The ensuing flow is described by rarefaction waves that propagate symmetrically inward from the boundaries, interact, and eventually vanish after crossing through, leading up to the asymptotic phase. We study, by numerical and analytical means, the evolution of a uniform one-dimensional collisionless plasma initiated between plane absorbing walls. The ensuing flow is described by rarefaction waves that propagate symmetrically inward from the boundaries, interact, and eventually vanish after crossing through, leading up to the asymptotic phase. △ Less

Submitted 23 August, 2020; originally announced August 2020.

Comments: Submitted to journal

Journal ref: Physics of Plasmas, 2020

Numerical benchmark of transient pressure-driven metallic melt flows

Authors: L. Vignitchouk, A. Khodak, S. Ratynskaia, I. D. Kaganovich

Abstract: Fluid dynamics simulations of melting and crater formation at the surface of a copper cathode exposed to high plasma heat fluxes and pressure gradients are presented. The predicted deformations of the free surface and the temperature evolution inside the metal are benchmarked against previously published simulations. Despite the physical model being entirely hydrodynamic and ignoring a variety of… ▽ More Fluid dynamics simulations of melting and crater formation at the surface of a copper cathode exposed to high plasma heat fluxes and pressure gradients are presented. The predicted deformations of the free surface and the temperature evolution inside the metal are benchmarked against previously published simulations. Despite the physical model being entirely hydrodynamic and ignoring a variety of plasma-surface interaction processes, the results are also shown to be remarkably consistent with the predictions of more advanced models, as well as experimental data. This provides a sound basis for future applications of similar models to studies of transient surface melting and droplet ejection from metallic plasma-facing components after disruptions. △ Less

Submitted 7 August, 2020; originally announced August 2020.

Perspectives on Physics of ExB Discharges Relevant to Plasma Propulsion and Similar Technologies

Authors: Igor D. Kaganovich, Andrei Smolyakov, Yevgeny Raitses, Eduardo Ahedo, Ioannis G. Mikellides, Benjamin Jorns, Francesco Taccogna, Renaud Gueroult, Sedina Tsikata, Anne Bourdon, Jean-Pierre Boeuf, Michael Keidar, Andrew Tasman Powis, Mario Merino, Mark Cappelli, Kentaro Hara, Johan A. Carlsson, Nathaniel J. Fisch, Pascal Chabert, Irina Schweigert, Trevor Lafleur, Konstantin Matyash, Alexander V. Khrabrov, Rod W. Boswell, Amnon Fruchtman

Abstract: This paper provides perspectives on recent progress in the understanding of the physics of devices where the external magnetic field is applied perpendicularly to the discharge current. This configuration generates a strong electric field, which acts to accelerates ions. The many applications of this set up include generation of thrust for spacecraft propulsion and the separation of species in pla… ▽ More This paper provides perspectives on recent progress in the understanding of the physics of devices where the external magnetic field is applied perpendicularly to the discharge current. This configuration generates a strong electric field, which acts to accelerates ions. The many applications of this set up include generation of thrust for spacecraft propulsion and the separation of species in plasma mass separation devices. These ExB plasmas are subject to plasma-wall interaction effects as well as various micro and macro instabilities, and in many devices, we observe the emergence of anomalous transport. This perspective presents the current understanding of the physics of these phenomena, state-of-the-art computational results, identifies critical questions, and suggests directions for future research △ Less

Submitted 17 July, 2020; originally announced July 2020.

Comments: 59 pages, 25 Figures, submitted to Physics of Plasmas

Model of a transition from low to high ablation regime in a carbon arc

Authors: A. Khrabry, I. D. Kaganovich, A. Khodak, V. Vekselman, T. Huang

Abstract: Graphite ablation in a presence of inert background gas is widely used in different methods for the synthesis of carbon nanotubes, including electric arc and laser/solar ablation. The ablation rate is an important characteristic of the synthesis process. It is known from multiple arc experiments that there are two distinguishable ablation regimes, so-called "low ablation" and "high ablation" regim… ▽ More Graphite ablation in a presence of inert background gas is widely used in different methods for the synthesis of carbon nanotubes, including electric arc and laser/solar ablation. The ablation rate is an important characteristic of the synthesis process. It is known from multiple arc experiments that there are two distinguishable ablation regimes, so-called "low ablation" and "high ablation" regimes in which the ablation rate behaves rather differently with variation of the arc parameters. We developed a model that explains low and high ablation regimes by taking into account the presence of a background gas and its effects on the ablation rate. We derive analytical relations for these regimes and verify them by comparing them with full numerical solutions in a wide arc parameter range. We comprehensively validate the model by comparing to multiple experimental data on the ablation rate in carbon arcs, where various arc parameters were varied. Good qualitative and quantitative agreement between full numerical solutions, analytical solutions, and experimental data was obtained. △ Less

Submitted 31 May, 2020; originally announced June 2020.

Validated two-dimensional modeling of short carbon arcs: anode and cathode spots

Authors: J. Chen, A. Khrabry, I. D. Kaganovich, A. Khodak, V. Vekselman, H. -P. Li

Abstract: In order to study properties of short carbon arcs, a self-consistent model was implemented into a CFD code ANSYS-CFX. The model treats transport of heat and electric current in the plasma and the electrodes in a coupled manner and accounts for gas convection in the chamber. Multiple surface processes at the electrodes are modeled, including the formation of space-charge limited sheaths, ablation a… ▽ More In order to study properties of short carbon arcs, a self-consistent model was implemented into a CFD code ANSYS-CFX. The model treats transport of heat and electric current in the plasma and the electrodes in a coupled manner and accounts for gas convection in the chamber. Multiple surface processes at the electrodes are modeled, including the formation of space-charge limited sheaths, ablation and deposition of carbon, emission and absorption of radiation and electrons. The simulations show that the arc is constricted near the cathode and the anode front surfaces leading to the formation of electrode spots. The cathode spot is a well-known phenomenon and mechanisms of its formation were reported elsewhere. However, the anode spot formation mechanism discovered in this work was not reported before. We conclude that the spot formation is not related to plasma instability, as commonly believed in case of constricted discharge columns, but rather occurs due to the highly nonlinear nature of heat balance in the anode. We additionally demonstrate this property with a reduced anode heat transfer model. We also show that the spot size increases with the arc current. This anode spot behavior was also confirmed in our experiments. Due to the anode spot formation, a large gradient of carbon gas density occurs near the anode, which drives a portion of the ablated carbon back to the anode at its periphery. This can consequently reduce the total ablation rate. Simulation results also show that the arc can reach local chemical equilibrium (LCE) state in the column region while the local thermal equilibrium (LTE) state is not typically achieved for experimental conditions. It shows that it is important to account for different electron and gas temperatures in the modeling of short carbon arcs. △ Less

Submitted 12 August, 2020; v1 submitted 13 April, 2020; originally announced April 2020.

Journal ref: Physics of Plasmas 27, 083511 (2020)

Convenient Analytical Solution for Vibrational Distribution Function of Molecules Colliding with a Wall

Authors: Wei Yang, Alexander V. Khrabrov, Igor D. Kaganovich, You-Nian Wang

Abstract: We study formation of the Vibrational Distribution Function (VDF) in a molecular gas at low pressure, when vibrational levels are excited by electron impact and deactivated in collisions with walls and show that this problem has a convenient analytical solution that can be used to obtain VDF and its dependence on external parameters. The VDF is determined by excitation of vibrational levels by an… ▽ More We study formation of the Vibrational Distribution Function (VDF) in a molecular gas at low pressure, when vibrational levels are excited by electron impact and deactivated in collisions with walls and show that this problem has a convenient analytical solution that can be used to obtain VDF and its dependence on external parameters. The VDF is determined by excitation of vibrational levels by an external source and deactivation in collisions with the wall. Deactivation in wall collisions is little known process. However, we found that the VDF is weakly dependent on the functional form of the actual form of probability gamma_v'->v for a vibrational number v' to transfer into a lower level v at the wall. Because for a given excitation source of vibrational states, the problem is linear the solution for VDF involves solving linear matrix equation. The matrix equation can be easily solved if we approximate probability, in the form: gamma_v'->v=(1/v')theta(v'->v). In this case, the steady-state solution for VDF(v) simply involves a sum of source rates for levels above , with a factor of 1/(v+1). As an example of application, we study the vibrational kinetics in a hydrogen gas and verify the analytical solution by comparing with a full model. △ Less

Submitted 11 November, 2019; originally announced November 2019.

Comments: 11 pages, 6 figures, letter

Journal ref: Plasma Sources Sci. Technol., 28 (2019) 10LT01

Neutralization of ion beam by electron injection, Part 2: Excitation and propagation of electrostatic solitary waves

Authors: Chaohui Lan, Igor D. Kaganovich

Abstract: The charge neutralization of an ion beam by electron injection is investigated using a two-dimensional electrostatic particle-in-cell code. The simulation results show that electrostatic solitary waves (ESWs) can be robustly generated in the neutralization process and last for long time (for more than 30 us); and therefore ESW can strongly affect the neutralization process. The ESWs propagate alon… ▽ More The charge neutralization of an ion beam by electron injection is investigated using a two-dimensional electrostatic particle-in-cell code. The simulation results show that electrostatic solitary waves (ESWs) can be robustly generated in the neutralization process and last for long time (for more than 30 us); and therefore ESW can strongly affect the neutralization process. The ESWs propagate along the axis of the ion beam and reflect from the beam boundaries. The simulations clearly show that two ESWs can pass through each other with only small changes in amplitude. Partial exchange of trapped electrons in collisions of two ESWs is observed in the simulations and can explain interaction during collisions of two ESWs. Coalescence of two ESWs is also observed. △ Less

Submitted 19 September, 2019; originally announced September 2019.

Comments: 14 pages, 8 figures

Neutralization of ion beam by electron injection, Part 1: Accumulation of cold electrons

Authors: Chaohui Lan, Igor D. Kaganovich

Abstract: Ion beam charge neutralization by electron injection is a complex kinetic process. Recent experiments show that resulting self-potential of the beam after neutralization by plasma could be much lower than the temperature of plasma electrons [Physics of Plasmas 23, 043113 (2016)], indicating that kinetic effects are important and may affect the neutralization of ion beam. We performed a numerical s… ▽ More Ion beam charge neutralization by electron injection is a complex kinetic process. Recent experiments show that resulting self-potential of the beam after neutralization by plasma could be much lower than the temperature of plasma electrons [Physics of Plasmas 23, 043113 (2016)], indicating that kinetic effects are important and may affect the neutralization of ion beam. We performed a numerical study of the charge neutralization process of an ion beam making use of a two-dimensional electrostatic particle-in-cell code. The results show that the process of charge neutralization by electron injection is comprised of two stages. During the first stage, the self-potential of the beam is higher than the temperature of injected electrons (Te/e). Therefore, the neutralization of the ion beam is almost unaffected by Te, and all injected electrons are captured by the ion beam. At the second stage, with the decline of the beam potential (), hot electrons escape from the ion beam, while cold electrons are slowly accumulated. As a result, can be much lower than Te/e. It is found in the simulations that during the accumulation of cold electrons, scales as . In addition, the results show that the transverse position of electron source has a great impact on ion beam neutralization. Slight shift of electron source leads to large increase of the beam potential because of increase in potential energy of injected electrons. △ Less

Submitted 19 September, 2019; originally announced September 2019.

Comments: 13 pages, 10 figures

Validated Modeling of Atmospheric-Pressure Anodic Arc

Authors: Alexander Khrabry, Igor D. Kaganovich, Andrei Khodak, Vlad Vekselman, Yevgeny Raitses

Abstract: We performed self-consistent modeling of the atmospheric-pressure plasmas produced by arc discharges. Special numerical procedure for coupling of the plasma current, emission current, ion current, sheath voltage drop, heat fluxes at plasma-electrode interfaces was developed and implemented into the ANSYS CFX code. Validation of the simulation results is performed through comparison of simulation r… ▽ More We performed self-consistent modeling of the atmospheric-pressure plasmas produced by arc discharges. Special numerical procedure for coupling of the plasma current, emission current, ion current, sheath voltage drop, heat fluxes at plasma-electrode interfaces was developed and implemented into the ANSYS CFX code. Validation of the simulation results is performed through comparison of simulation results with the previously available experimental data obtained by a range of various plasma diagnostics. △ Less

Submitted 26 February, 2019; originally announced February 2019.

Determining Gas Composition for Growth of BNNTs Using Thermodynamic Approach

Authors: Alexander Khrabry, Igor D. Kaganovich, Shurik Yatom, Vlad Vekselman, Jelena Radić-Perić, John Rodman, Yevgeny Raitses

Abstract: A high-yield production of high-quality boron-nitride nanotubes (BNNTs) was reported recently in several publications. A boron-rich material is evaporated by a laser or plasma in a nitrogen-rich atmosphere to supply precursor gaseous species for nucleation and growth of BNNTs. Either hydrogen was added or pressure was increased in the system to achieve high yield and high purity of the synthesized… ▽ More A high-yield production of high-quality boron-nitride nanotubes (BNNTs) was reported recently in several publications. A boron-rich material is evaporated by a laser or plasma in a nitrogen-rich atmosphere to supply precursor gaseous species for nucleation and growth of BNNTs. Either hydrogen was added or pressure was increased in the system to achieve high yield and high purity of the synthesized nanotubes. According to the widely-accepted "root grow" mechanism, upon the gas cooling, boron droplets form first, then they adsorb nitrogen from surrounding gas species, and BNNTs grow on their surfaces. However, what are these precursor species that provide nitrogen for the growth is still an open question. To answer this question, we performed thermodynamic calculations of B-N mixture composition considering broad set of gas species. In enhancement of previous studies, the condensation of boron is now taken into account and is shown to have drastic effect on the gas chemical composition. B2N molecules were identified to be a major source of nitrogen for growth of BNNTs. Presence of B2N molecules in a B-N gas mixture was verified by our spectroscopic measurements during a laser ablation of boron-rich targets in nitrogen. It was shown that the increase of pressure has a quantitative effect on the mixture composition yielding increase of the precursor density. The hydrogen addition might open an additional channel of nitrogen supply to support growth of BNNTs. Nitrogen atoms react with abundant H2 molecules to form NH2 and then NH3 precursor species, instead of just recombining back to inert N2 molecules, as in the no-hydrogen case. In addition, thermodynamics was applied in conjunction with agglomeration theory to predict the size of boron droplets upon growth of BNNTs. Analytical relations for identification of crucial species densities were derived. △ Less

Submitted 28 May, 2019; v1 submitted 22 October, 2018; originally announced October 2018.

Benchmarking and validation of global model code for negative hydrogen ion sources

Authors: Wei Yang, Sergey N. Averkin, Alexander V. Khrabrov, Igor D. Kaganovich, You-Nian Wang

Abstract: Benchmarking and validation are prerequisite for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to present quite comprehensive benchmarking test of this kin… ▽ More Benchmarking and validation are prerequisite for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to present quite comprehensive benchmarking test of this kind for models of negative hydrogen ion sources (NHIS), and very good agreement has been achieved for electron temperature, vibrational distribution function (VDF) of hydrogen molecules, and n_H^-/n_e ratio. The small discrepancies in number densities of negative hydrogen ions, positive ions, as well as hydrogen atoms can be attributed to the differences in the predicted electron number density for given discharge power. Higher electron number density obtained with GMNHIS is possibly due to fewer dissociation channels accounted for in GMNHIS, leading to smaller energy loss. In addition, we validated GMNHIS against experimental data obtained in an electron cyclotron resonance (ECR) discharge used for H^- production. The model qualitatively (and even quantitatively for certain conditions) reproduces the experimental H^- number density. The H^- number density as a function of pressure first increases at pressures below 12 mTorr, and then saturates for higher pressures. This dependence was analyzed by evaluating contributions from different reaction pathways to the creation and loss of the H^- ions. The developed codes can be used for predicting the H^- production, improving the performance of NHIS, and ultimately optimizing the parameters of negative ion beams for ITER. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Comments: 25 pages, 12 figures

Scaling of Spoke Rotation Frequency within a Penning Discharge

Authors: Andrew T. Powis, Johan A. Carlsson, Igor D. Kaganovich, Yevgeny Raitses, Andrei Smolyakov

Abstract: A rotating plasma spoke is shown to develop in two-dimensional full-sized kinetic simulations of a Penning discharge cross-section. Electron cross-field transport within the discharge is highly anomalous and correlates strongly with the spoke phase. Similarity between collisional and collisionless simulations demonstrates that ionization is not necessary for spoke formation. Parameter scans with d… ▽ More A rotating plasma spoke is shown to develop in two-dimensional full-sized kinetic simulations of a Penning discharge cross-section. Electron cross-field transport within the discharge is highly anomalous and correlates strongly with the spoke phase. Similarity between collisional and collisionless simulations demonstrates that ionization is not necessary for spoke formation. Parameter scans with discharge current $I_d$, applied magnetic field strength $B$ and ion mass $m_i$ show that spoke frequency scales with $\sqrt{e E_r L_n / m_i}$, where $E_r$ is the radial electric field, $L_n$ is the gradient length scale and $e$ is the fundamental charge. This scaling suggests that the spoke may develop as a non-linear phase of the collisionless Simon-Hoh instability. △ Less

Submitted 11 May, 2018; originally announced May 2018.

Design and Implementation of a Thomson Parabola for Fluence Dependent Energy-Loss Measurements at the Neutralized Drift Compression eXperiment

Authors: F. Treffert, Q. Ji, P. A. Seidl, A. Persaud, B. Ludewigt, J. J. Barnard, A. Friedman, D. P. Grote, E. P. Gilson, I. D. Kaganovich, A. Stepanov, M. Roth, T. Schenkel

Abstract: The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compressi… ▽ More The interaction of ion beams with matter includes the investigation of the basic principles of ion stop** in heated materials. An unsolved question is the effect of different, especially higher, ion beam fluences on ion stop** in solid targets. This is relevant in applications such as in fusion sciences. To address this question, a Thomson parabola was built for the Neutralized Drift Compression eXperiment (NDCX-II) for ion energy-loss measurements at different ion beam fluences. The linear induction accelerator NDCX-II delivers 2 ns short, intense ion pulses, up to several tens of nC/pulse, or 10$^{10}$-10$^{11}$ ions, with a peak kinetic energy of ~1.1 MeV and a minimal spot size of 2 mm FWHM. For this particular accelerator the energy determination with conventional beam diagnostics, for example, time of flight measurements, is imprecise due to the non-trivial longitudinal phase space of the beam. In contrast, a Thomson parabola is well suited to reliably determine the beam energy distribution. The Thomson parabola differentiates charged particles by energy and charge-to-mass ratio, through deflection of charged particles by electric and magnetic fields. During first proof-of-principle experiments, we achieved to reproduce the average initial helium beam energy as predicted by computer simulations with a deviation of only 1.4 %. Successful energy-loss measurements with 1 μm thick Silicon Nitride foils show the suitability of the accelerator for such experiments. The initial ion energy was determined during a primary measurement without a target, while a second measurement, incorporating the target, was used to determine the transmitted energy. The energy-loss was then determined as the difference between the two energies. △ Less

Submitted 28 September, 2018; v1 submitted 9 April, 2018; originally announced April 2018.

Analytical model of three regimes of cold cathode breakdown in helium

Authors: Liang Xu, Alexander V. Khrabrov, Igor D. Kaganovich, Timothy J. Sommerer

Abstract: An analytical model has been developed to map out the low-pressure (left-hand) branch of the Paschen curve at very high voltage when electrons are in the runaway regime and charge exchange/ionization avalanche by ions and fast neutral atoms becomes important. The model has been applied to helium gas between parallel-plate electrodes, at potentials ranging in magnitude between 10 and 1000 kilovolt.… ▽ More An analytical model has been developed to map out the low-pressure (left-hand) branch of the Paschen curve at very high voltage when electrons are in the runaway regime and charge exchange/ionization avalanche by ions and fast neutral atoms becomes important. The model has been applied to helium gas between parallel-plate electrodes, at potentials ranging in magnitude between 10 and 1000 kilovolt. The respective value of reduced electric field E/n varies in the range of 50-6000kTd, with reduced density nd (where n is the gas density and d is the inter-electrode distance) on the order of 10^20 m^-2. For fast neutral atoms produced via charge exchange, the following interactions prove essential to understanding the breakdown mechanism: contribution to impact ionization, strongly anisotropic scattering in collisions with background atoms,and backscattering (of both atoms and ions, which become neutralized) from the cathode. Three regimes of the breakdown have been identified according to relative share of impact ionization by electrons, by ions, and by fast neutrals. In the fast-neutral regime of particular interest here, the ionization avalanche is directed from anode towards cathode. It is initiated by the fast neutral beam backscattered from the cathode, and charge multiplication occurs through multiple successive cycles of ionization and charge exchange. Further, the double-valued shape of the Paschen curve with a branch point near 200 kV is found to be due to heavy species undergoing a transition to runaway regime. The analytical Paschen curve is compared to those obtained with a detailed Particle-In-Cell/Monte Carlo (PIC/MCC) simulation, and also to experimental measurements. The model provides accurate predictions for E/n up to ~ 1000 kTd, constrained by availability and quality of required input data. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Comments: 30 pages,14 figures

Amplification due to Two-Stream Instability of Self-Electric and Magnetic Fields of an Ion Beam Propagating in Background Plasma

Authors: Erinc K. Tokluoglu, Igor D. Kaganovich, Johan A. Carlsson, Kentaro Hara, Edward A. Startsev

Abstract: Propagation of charged particle beams in background plasma as a method of space charge neutralization has been shown to achieve a high degree of charge and current neutralization and therefore enables nearly ballistic propagation and focusing of charged particle beams. Correspondingly, use of plasmas for propagation of charged particle beams has important applications for transport and focusing of… ▽ More Propagation of charged particle beams in background plasma as a method of space charge neutralization has been shown to achieve a high degree of charge and current neutralization and therefore enables nearly ballistic propagation and focusing of charged particle beams. Correspondingly, use of plasmas for propagation of charged particle beams has important applications for transport and focusing of intense particle beams in inertial fusion and high energy density laboratory plasma physics. However, the streaming of beam ions through a background plasma can lead to development of the two-stream instability between the beam ions and the plasma electrons. The beam electric and magnetic fields enhanced by the two-stream instability can lead to defocusing of the ion beam. Using particle-in-cell (PIC) simulations, we study the scaling of the instability-driven self-electromagnetic fields and consequent defocusing forces with the background plasma density and beam ion mass. We identify plasma parameters where the defocusing forces can be reduced. △ Less

Submitted 27 November, 2017; originally announced November 2017.

Comments: 28 pages, submitted to Phys. Plasmas

Excitation of a global plasma mode by an intense electron beam in a dc discharge

Authors: D. Sydorenko, I. D. Kaganovich, P. L. G. Ventzek, L. Chen

Abstract: Interaction of an intense electron beam with a finite-length, inhomogeneous plasma is investigated numerically. The plasma density profile is maximal in the middle and decays towards the plasma edges. Two regimes of the two-stream instability are observed. In one regime, the frequency of the instability is the plasma frequency at the density maximum and plasma waves are excited in the middle of th… ▽ More Interaction of an intense electron beam with a finite-length, inhomogeneous plasma is investigated numerically. The plasma density profile is maximal in the middle and decays towards the plasma edges. Two regimes of the two-stream instability are observed. In one regime, the frequency of the instability is the plasma frequency at the density maximum and plasma waves are excited in the middle of the plasma. In the other regime, the frequency of the instability matches the local plasma frequency near the edges of the plasma and the intense plasma oscillations occur near plasma boundaries. The latter regime appears sporadically and only for strong electron beam currents. This instability generates copious amount of suprathermal electrons. The energy transfer to suprathermal electrons is the saturation mechanism of the instability. △ Less

Submitted 13 November, 2017; originally announced November 2017.

Optimizing Beam Transport in Rapidly Compressing Beams on the Neutralized Drift Compression Experiment - II

Authors: Anton D. Stepanov, Erik P. Gilson, Igor D. Kaganovich, Peter A. Seidl, Arun Persaud, Qing Ji, Thomas Schenkel, Alex Friedman, John J. Barnard, David P. Grote

Abstract: The Neutralized Drift Compression Experiment-II (NDCX-II) is an induction linac that generates intense pulses of 1.2 MeV helium ions for heating matter to extreme conditions. Here, we present recent results on optimizing beam transport. The NDCX-II beamline includes a 1-meter-long drift section downstream of the last transport solenoid, which is filled with charge-neutralizing plasma that enables… ▽ More The Neutralized Drift Compression Experiment-II (NDCX-II) is an induction linac that generates intense pulses of 1.2 MeV helium ions for heating matter to extreme conditions. Here, we present recent results on optimizing beam transport. The NDCX-II beamline includes a 1-meter-long drift section downstream of the last transport solenoid, which is filled with charge-neutralizing plasma that enables rapid longitudinal compression of an intense ion beam against space-charge forces. The transport section on NDCX-II consists of 28 solenoids. Finding optimal field settings for a group of solenoids requires knowledge of the envelope parameters of the beam. Imaging the beam on scintillator gives the radius of the beam, but the envelope angle dr/dz is not measured directly. We demonstrate how the parameters of the beam envelope (r, dr/dz, and emittance) can be reconstructed from a series of images taken at varying B-field strengths of a solenoid upstream of the scintillator. We use this technique to evaluate emittance at several points in the NDCX-II beamline and for optimizing the trajectory of the beam at the entry of the plasma-filled drift section. △ Less

Submitted 1 November, 2017; originally announced November 2017.

Modeling of reduced secondary electron emission yield from a foam or fuzz surface

Authors: Charles Swanson, Igor D. Kaganovich

Abstract: Complex structures on a material surface can significantly reduce the total secondary electron emission yield from that surface. A foam or fuzz is a solid surface above which is placed a layer of isotropically aligned whiskers. Primary electrons that penetrate into this layer produce secondary electrons that become trapped and not escape into the bulk plasma. In this manner the secondary electron… ▽ More Complex structures on a material surface can significantly reduce the total secondary electron emission yield from that surface. A foam or fuzz is a solid surface above which is placed a layer of isotropically aligned whiskers. Primary electrons that penetrate into this layer produce secondary electrons that become trapped and not escape into the bulk plasma. In this manner the secondary electron yield (SEY) may be reduced. We developed an analytic model and conducted numerical simulations of secondary electron emission from a foam to determine the extent of SEY reduction. We find that the relevant condition for SEY minimization is $\bar{u} \equiv AD/2 >>1 $, where $D$ is the volume fill fraction and $A$ is the aspect ratio of the whisker layer, the ratio of the thickness of the layer to the radius of the fibers. We find that foam can not reduce the SEY from a surface to less than 0.3 of its flat value. △ Less

Submitted 4 October, 2017; originally announced October 2017.

Investigation of the Short Argon Arc with Hot Anode, Part II: Analytical Model

Authors: A Khrabry, I. D. Kaganovich, V. Nemchinsky, A. Khodak

Abstract: Short atmospheric pressure argon arc is studied numerically and analytically. In a short arc with inter-electrode gap of several millimeters non-equilibrium effects in plasma play important role in operation of the arc. High anode temperature leads to electron emission and intensive radiation from its surface. Complete self-consistent analytical model of the whole arc comprising of models for near… ▽ More Short atmospheric pressure argon arc is studied numerically and analytically. In a short arc with inter-electrode gap of several millimeters non-equilibrium effects in plasma play important role in operation of the arc. High anode temperature leads to electron emission and intensive radiation from its surface. Complete self-consistent analytical model of the whole arc comprising of models for near-electrode regions, arc column and a model of heat transfer in cylindrical electrodes was developed. The model predicts width of non-equilibrium layers and arc column, voltages and plasma profiles in these regions, heat and ion fluxes to the electrodes. Parametric studies of the arc have been performed for a range of the arc current densities, inter-electrode gap widths and gas pressures. The model was validated against experimental data and verified by comparison with numerical solution. Good agreement between the analytical model and simulations and reasonable agreement with experimental data were obtained. △ Less

Submitted 29 December, 2017; v1 submitted 29 September, 2017; originally announced October 2017.

Journal ref: Phys. Plasmas 25, 013522 (2018)

Generation of forerunner electron beam during interaction of ion beam pulse with plasma

Authors: Kentaro Hara, Igor D. Kaganovich, Edward A. Startsev

Abstract: The long-time evolution of the two-stream instability of a cold ion beam pulse propagating though the background plasma is investigated using a large-scale one-dimensional electrostatic kinetic simulation. The three stages of the instability are identified and investigated in detail. After the initial linear growth and saturation by the electron trap**, a portion of the initially trapped electro… ▽ More The long-time evolution of the two-stream instability of a cold ion beam pulse propagating though the background plasma is investigated using a large-scale one-dimensional electrostatic kinetic simulation. The three stages of the instability are identified and investigated in detail. After the initial linear growth and saturation by the electron trap**, a portion of the initially trapped electrons becomes detrapped and moves ahead of the ion beam pulse forming a {forerunner} electron beam, which causes a secondary two-stream instability that preheats the upstream plasma electrons. Consequently, the self-consistent nonlinear-driven turbulent state is set up at the head of the ion beam pulse with the saturated plasma wave sustained by the influx of the cold electrons from the upstream of the beam that lasts until the final stage when the beam ions become trapped by the plasma wave. The beam ion trap** leads to the nonlinear heating of the beam ions that eventually extinguishes the instability. △ Less

Submitted 18 May, 2017; originally announced May 2017.

Irradiation of Materials with Short, Intense Ion pulses at NDCX-II

Authors: P. A. Seidl, Q. Ji, A. Persaud, E. Feinberg, B. Ludewigt, M. Silverman, A. Sulyman, W. L. Waldron, T. Schenkel, J. J. Barnard, A. Friedman, D. P. Grote, E. P. Gilson, I. D. Kaganovich, A. D. Stepanov, F. Treffert, M. Zimmer

Abstract: We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been creat… ▽ More We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and report on recent target experiments on beam driven melting and transmission ion energy loss measurements with nanosecond and millimeter-scale ion beam pulses and thin tin foils. Bunches with around 10^11 ions, 1-mm radius, and 2-30 ns FWHM duration have been created with corresponding fluences in the range of 0.1 to 0.7 J/cm^2. To achieve these short pulse durations and mm-scale focal spot radii, the 1.1 MeV He+ ion beam is neutralized in a drift compression section, which removes the space charge defocusing effect during final compression and focusing. The beam space charge and drift compression techniques resemble necessary beam conditions and manipulations in heavy ion inertial fusion accelerators. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance. △ Less

Submitted 12 April, 2017; v1 submitted 16 March, 2017; originally announced March 2017.

Comments: 15 pages, 7 figures. revised manuscript submitted to Laser and Particle Beams

Recent Experiments At Ndcx-II: Irradiation Of Materials Using Short, Intense Ion Beams

Authors: P. A. Seidl, Q. Ji, A. Persaud, E. Feinberg, B. Ludewigt, M. Silverman, A. Sulyman, W. L. Waldron, T. Schenkel, J. J. Barnard, A. Friedman, D. P. Grote, E. P. Gilson, I. D. Kaganovich, A. Stepanov, F. Treffert, M. Zimmer

Abstract: We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter… ▽ More We present an overview of the performance of the Neutralized Drift Compression Experiment-II (NDCX-II) accelerator at Berkeley Lab, and summarize recent studies of material properties created with nanosecond and millimeter-scale ion beam pulses. The scientific topics being explored include the dynamics of ion induced damage in materials, materials synthesis far from equilibrium, warm dense matter and intense beam-plasma physics. We summarize the improved accelerator performance, diagnostics and results of beam-induced irradiation of thin samples of, e.g., tin and silicon. Bunches with over 3x10^10 ions, 1- mm radius, and 2-30 ns FWHM duration have been created. To achieve these short pulse durations and mm-scale focal spot radii, the 1.2 MeV He+ ion beam is neutralized in a drift compression section which removes the space charge defocusing effect during final compression and focusing. Quantitative comparison of detailed particle-in-cell simulations with the experiment play an important role in optimizing accelerator performance; these keep pace with the accelerator repetition rate of ~1/minute. △ Less

Submitted 17 October, 2016; originally announced October 2016.

Comments: Submitted to the 2016 North American Particle Accelerator Conference (NAPAC16). Proceedings to be published at http://jacow.org/

Effect of collisions on the two-stream instability in a finite length plasm

Authors: Dmytro Sydorenko, Igor D. Kaganovich, Peter L. G. Vetzek

Abstract: The instability of a monoenergetic electron beam in a collisional one-dimensional plasma bounded between grounded walls is considered both analytically and numerically. Collisions between electrons and neutrals are accounted for the plasma electrons only. Solution of a dispersion equation shows that the temporal growth rate of the instability is a decreasing linear function of the collision freque… ▽ More The instability of a monoenergetic electron beam in a collisional one-dimensional plasma bounded between grounded walls is considered both analytically and numerically. Collisions between electrons and neutrals are accounted for the plasma electrons only. Solution of a dispersion equation shows that the temporal growth rate of the instability is a decreasing linear function of the collision frequency which becomes zero when the collision frequency is two times the collisionless growth rate. This result is confirmed by fluid simulations. Practical formulas are given for the estimate of the threshold beam current which is required for the two-stream instability to develop for a given system length, neutral gas pressure, plasma density, and beam energy. Particle-in-cell simulations carried out with different neutral densities and beam currents demonstrate good agreement with the fluid theory predictions for both the growth rate and the threshold beam current. △ Less

Submitted 3 August, 2016; originally announced August 2016.

Comments: 9 pages, to be submitted to Physics of Plasmas

Modeling of Reduced Effective Secondary Electron Emission Yield from a Velvet Surface

Authors: Charles Swanson, Igor D. Kaganovich

Abstract: Complex structures on a material surface can significantly reduce total secondary electron emission from that surface. A velvet is a surface that consists of an array of vertically standing whiskers. The reduction occurs due to the capture of low-energy, true secondary electrons emitted at the bottom of the structure and on the sides of the velvet whiskers. We performed numerical simulations and d… ▽ More Complex structures on a material surface can significantly reduce total secondary electron emission from that surface. A velvet is a surface that consists of an array of vertically standing whiskers. The reduction occurs due to the capture of low-energy, true secondary electrons emitted at the bottom of the structure and on the sides of the velvet whiskers. We performed numerical simulations and developed an approximate analytical model that calculates the net secondary electron emission yield from a velvet surface as a function of the velvet whisker length and packing density, and the angle of incidence of primary electrons. We found that to suppress secondary electrons, the following condition on dimensionless parameters must be met: π/2 DA tan θ >> 1 where θ is the angle of incidence of the primary electron from the normal, D is the fraction of surface area taken up by the velvet whisker bases, and A is the aspect ratio, A {\equiv} h/r, the ratio of height to radius of the velvet whiskers. We find that velvets available today can reduce the secondary electron yield by 90% from the value of a flat surface. The values of optimal velvet whisker packing density that maximally suppresses secondary electron emission yield are determined as a function of velvet aspect ratio and electron angle of incidence. △ Less

Submitted 3 October, 2016; v1 submitted 15 July, 2016; originally announced July 2016.

Comments: 10 pages. Revisions added as per reviewers

Ion velocity distribution functions in argon and helium discharges: detailed comparison of numerical simulation results and experimental data

Authors: Huihui Wang, Vladimir S Sukhomlinov, Igor D Kaganovich, Alexander S Mustafaev

Abstract: Using Monte Carlo Collisions (MCC) method, we have performed simulations of ion velocity distribution functions (IVDF) taking into account both elastic collisions and charge exchange collisions of ions with atoms in uniform electric fields for argon and helium background gases. The simulation results are verified by comparison with the experiment data of the ion drift velocities and the ion transv… ▽ More Using Monte Carlo Collisions (MCC) method, we have performed simulations of ion velocity distribution functions (IVDF) taking into account both elastic collisions and charge exchange collisions of ions with atoms in uniform electric fields for argon and helium background gases. The simulation results are verified by comparison with the experiment data of the ion drift velocities and the ion transverse diffusion coefficients in argon and helium. The recently published experimental data for the first seven coefficients of the Legendre polynomial expansion of the ion energy and angular distribution functions are used to validate simulation results for IVDF. Good agreements between measured and simulated IVDFs show that the developed simulation model can be used for accurate calculations of IVDFs. △ Less

Submitted 7 January, 2017; v1 submitted 28 May, 2016; originally announced May 2016.

Comments: Plasma Sources Sci. Technol. 26 (2017) 024002

Simulations of Ion Velocity Distribution Functions Taking into Account Both Elastic and Charge Exchange Collisions

Authors: Huihui Wang, Vladimir S. Sukhomlinov, Igor D. Kaganovich, Alexander S. Mustafaev

Abstract: Based on accurate representation of the He+-He angular differential scattering cross sections consisting of both elastic and charge exchange collisions, we performed detailed numerical simulations of the ion velocity distribution functions (IVDF) by Monte Carlo collision method (MCC). The results of simulations are validated by comparison with the experimental data of the ion mobility and the tran… ▽ More Based on accurate representation of the He+-He angular differential scattering cross sections consisting of both elastic and charge exchange collisions, we performed detailed numerical simulations of the ion velocity distribution functions (IVDF) by Monte Carlo collision method (MCC). The results of simulations are validated by comparison with the experimental data of the ion mobility and the transverse diffusion. The IVDF simulation study shows that due to significant effect of scattering in elastic collisions IVDF cannot be separated into product of two independent IVDFs in the transverse and parallel to the electric field directions. △ Less

Submitted 11 January, 2017; v1 submitted 27 May, 2016; originally announced May 2016.

Comments: Plasma Sources Sci. Technol. 26 (2017) 024001

Short-Pulse, Compressed Ion Beams at the Neutralized Drift Compression Experiment

Authors: Peter A Seidl, John J Barnard, Ronald C Davidson, Alex Friedman, Erik P Gilson, David Grote, Qing Ji, I D Kaganovich, Arun Persaud, William L Waldron, Thomas Schenkel

Abstract: We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory, with 1-mm beam spot size within 2.5 ns full-width at half maximum. The ion kinetic energy is 1.2 MeV. To enable the short pulse duration and mm-scale focal spot radius, the beam is neutralized in a 1.5-meter-long drift compression… ▽ More We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment (NDCX-II) at Lawrence Berkeley National Laboratory, with 1-mm beam spot size within 2.5 ns full-width at half maximum. The ion kinetic energy is 1.2 MeV. To enable the short pulse duration and mm-scale focal spot radius, the beam is neutralized in a 1.5-meter-long drift compression section following the last accelerator cell. A short-focal-length solenoid focuses the beam in the presence of the volumetric plasma that is near the target. In the accelerator, the line-charge density increases due to the velocity ramp imparted on the beam bunch. The scientific topics to be explored are warm dense matter, the dynamics of radiation damage in materials, and intense beam and beam-plasma physics including select topics of relevance to the development of heavy-ion drivers for inertial fusion energy. Below the transition to melting, the short beam pulses offer an opportunity to study the multi-scale dynamics of radiation-induced damage in materials with pump-probe experiments, and to stabilize novel metastable phases of materials when short-pulse heating is followed by rapid quenching. First experiments used a lithium ion source; a new plasma-based helium ion source shows much greater charge delivered to the target. △ Less

Submitted 7 January, 2016; originally announced January 2016.

Comments: 4 pages, 2 figures, 1 table. Submitted to the proceedings for the Ninth International Conference on Inertial Fusion Sciences and Applications, IFSA 2015

Short intense ion pulses for materials and warm dense matter research

Authors: Peter A. Seidl, Wayne G. Greenway, Steven M. Lidia, Arun Persaud, Matthew Stettler, Jeffrey H. Takakuwa, William L. Waldron, Thomas Schenkel, John J. Barnard, Alex Friedman, David P. Grote, Ronald C. Davidson, Erik P. Gilson, Igor D. Kaganovich

Abstract: We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment-II at Lawrence Berkeley National Laboratory, by generating beam spots size with radius r < 1 mm within 2 ns FWHM and approximately 10^10 ions/pulse. To enable the short pulse durations and mm-scale focal spot radii, the 1.2 MeV Li+ ion beam is neutralized in a 1.6-meter drift compre… ▽ More We have commenced experiments with intense short pulses of ion beams on the Neutralized Drift Compression Experiment-II at Lawrence Berkeley National Laboratory, by generating beam spots size with radius r < 1 mm within 2 ns FWHM and approximately 10^10 ions/pulse. To enable the short pulse durations and mm-scale focal spot radii, the 1.2 MeV Li+ ion beam is neutralized in a 1.6-meter drift compression section located after the last accelerator magnet. An 8-Tesla short focal length solenoid compresses the beam in the presence of the large volume plasma near the end of this section before the target. The scientific topics to be explored are warm dense matter, the dynamics of radiation damage in materials, and intense beam and beam-plasma physics including selected topics of relevance to the development of heavy-ion drivers for inertial fusion energy. Here we describe the accelerator commissioning and time-resolved ionoluminescence measurements of yttrium aluminium perovskite using the fully integrated accelerator and neutralized drift compression components. △ Less

Submitted 18 June, 2015; originally announced June 2015.

Comments: 7 pages, 9 figures

Structure of Velocity Distribution of Sheath-Accelerated Secondary Electrons in Asymmetric RF-DC Discharge

Authors: Alexander V. Khrabrov, Igor D. Kaganovich, Peter L. G. Ventzek, Alok Ranjan, Lee Chen

Abstract: The ballistic population is thought to be responsible for alleviating the electron shading effect and the notching of the photoresist layer. We have performed test-particle simulations where the features in the EVDF of electrons impacting the RF electrode are fully resolved at all energies. An analytic model has been developed to predict existence of peaked and step-like structures in the EVDF. The ballistic population is thought to be responsible for alleviating the electron shading effect and the notching of the photoresist layer. We have performed test-particle simulations where the features in the EVDF of electrons impacting the RF electrode are fully resolved at all energies. An analytic model has been developed to predict existence of peaked and step-like structures in the EVDF. △ Less

Submitted 26 March, 2015; originally announced March 2015.

Comments: 29 pages, submitted to Plasma Science and Technology

Generation of anomalously energetic suprathermal electrons by an electron beam interacting with a nonuniform plasma

Authors: D. Sydorenko, I. D. Kaganovich, L. Chen, P. L. G. Ventzek

Abstract: Generation of anomalously energetic suprathermal electrons was observed in simulation of a high- voltage dc discharge with electron emission from the cathode. An electron beam produced by the emission interacts with the nonuniform plasma in the discharge via a two-stream instability. Efficient energy transfer from the beam to the plasma electrons is ensured by the plasma nonuniformity. The electro… ▽ More Generation of anomalously energetic suprathermal electrons was observed in simulation of a high- voltage dc discharge with electron emission from the cathode. An electron beam produced by the emission interacts with the nonuniform plasma in the discharge via a two-stream instability. Efficient energy transfer from the beam to the plasma electrons is ensured by the plasma nonuniformity. The electron beam excites plasma waves whose wavelength and phase speed gradually decrease towards anode. The short waves near the anode accelerate plasma bulk electrons to suprathermal energies. The sheath near the anode reflects some of the accelerated electrons back into the plasma. These electrons travel through the plasma, reflect near the cathode, and enter the accelerating area again but with a higher energy than before. Such particles are accelerated to energies much higher than after the first acceleration. This mechanism plays a role in explaining earlier experimental observations of energetic suprathermal electrons in similar discharges. △ Less

Submitted 17 March, 2015; originally announced March 2015.

Comments: 5 pages

Band Structure of the Growth Rate of the Two-Stream Instability of an Electron Beam Propagating in a Bounded Plasma

Authors: I. D. Kaganovich, D. Sydorenko

Abstract: This paper presents a study of the two-stream instability of an electron beam propagating in a finite-size plasma placed between two electrodes. It is shown that the growth rate in such a system is much smaller than that of an infinite plasma or a finite size plasma with periodic boundary conditions. Even if the width of the plasma matches the resonance condition for a standing wave, a spatially g… ▽ More This paper presents a study of the two-stream instability of an electron beam propagating in a finite-size plasma placed between two electrodes. It is shown that the growth rate in such a system is much smaller than that of an infinite plasma or a finite size plasma with periodic boundary conditions. Even if the width of the plasma matches the resonance condition for a standing wave, a spatially growing wave is excited instead with the growth rate small compared to that of the standing wave in a periodic system. The approximate expression for this growth rate is $γ\approx (1/13)ω_{pe}(n_{b}/n_{p})(Lω_{pe}/v_{b})\ln (Lω_{pe}/v_{b})[ 1-0.18\cos ( Lω_{pe}/v_{b}+{π}/{2}) ]$, where $ω_{pe}$ is the electron plasma frequency, $n_{b}$ and $n_{p}$ are the beam and the plasma densities, respectively, $v_{b}$ is the beam velocity, and $L$ is the plasma width. The frequency, wave number and the spatial and temporal growth rates as functions of the plasma size exhibit band structure. The amplitude of saturation of the instability depends on the system length, not on the beam current. For short systems, the amplitude may exceed values predicted for infinite plasmas by more than an order of magnitude. △ Less

Submitted 14 September, 2016; v1 submitted 16 March, 2015; originally announced March 2015.

Comments: 9 pages

Ion sound instability driven by ion beam

Authors: O. Koshkarov, A. I. Smolyakov, I. D. Kaganovich, V. I. Ilgisonis

Abstract: Ion sound instabilities driven by the ion flow in a system of a finite length are considered by analytical and numerical methods. The ion sound waves are modified by the presence of stationary ion flow resulting in negative and positive energy modes. The instability develops due to coupling of negative and positive energy modes mediated by reflections from the boundary. It is shown that the wave d… ▽ More Ion sound instabilities driven by the ion flow in a system of a finite length are considered by analytical and numerical methods. The ion sound waves are modified by the presence of stationary ion flow resulting in negative and positive energy modes. The instability develops due to coupling of negative and positive energy modes mediated by reflections from the boundary. It is shown that the wave dispersion due to deviation from quasineutrality is crucial for the stability. In finite length system, the dispersion is characterized by the length of the system measured in units of the Debye length. The instability is studied analytically and the results are compared with direct, initial value numerical simulations. △ Less

Submitted 13 May, 2015; v1 submitted 2 December, 2014; originally announced December 2014.

Secondary electron emission yield in the limit of low electron energy

Authors: A. N. Andronov, A. S. Smirnov, I. D. Kaganovich, E. A. Startsev, Y. Raitses, V. I. Demidov

Abstract: Secondary electron emission (SEE) from solids plays an important role in many areas of science and technology.1 In recent years, there has been renewed interest in the experimental and theoretical studies of SEE. A recent study proposed that the reflectivity of very low energy electrons from solid surface approaches unity in the limit of zero electron energy2,3,4, If this was indeed the case, this… ▽ More Secondary electron emission (SEE) from solids plays an important role in many areas of science and technology.1 In recent years, there has been renewed interest in the experimental and theoretical studies of SEE. A recent study proposed that the reflectivity of very low energy electrons from solid surface approaches unity in the limit of zero electron energy2,3,4, If this was indeed the case, this effect would have profound implications on the formation of electron clouds in particle accelerators,2-4 plasma measurements with electrostatic Langmuir probes, and operation of Hall plasma thrusters for spacecraft propulsion5,6. It appears that, the proposed high electron reflectivity at low electron energies contradicts to numerous previous experimental studies of the secondary electron emission7. The goal of this note is to discuss possible causes of these contradictions. △ Less

Submitted 18 September, 2013; originally announced September 2013.

Comments: 3 pages, contribution to the Joint INFN-CERN-EuCARD-AccNet Workshop on Electron-Cloud Effects: ECLOUD'12; 5-9 Jun 2012, La Biodola, Isola d'Elba, Italy

Journal ref: CERN Yellow Report CERN-2013-002, pp.161-163

Sheath instabilities in Hall plasmas devices

Authors: A. I. Smolyakov, W. Frias, I. D. Kaganovich, Y. Raitses

Abstract: New class instabilities is identified in Hall plasmas in configurations with open magnetic field lines. It is shown that sheath resistivity results in a robust instability driven by the equilibrium electric field. It is conjectured that these instabilities play a crucial role in anomalous transport in Hall plasmas devices. New class instabilities is identified in Hall plasmas in configurations with open magnetic field lines. It is shown that sheath resistivity results in a robust instability driven by the equilibrium electric field. It is conjectured that these instabilities play a crucial role in anomalous transport in Hall plasmas devices. △ Less

Submitted 30 March, 2012; originally announced March 2012.