Showing 1–13 of 13 results for author: Kähler, J

Effects of anisotropy on the geometry of tracer particle trajectories in turbulent flows

Authors: Yasmin Hengster, Martin Lellep, Julian Weigel, Matthew Bross, Johannes Bosbach, Daniel Schanz, Andreas Schröder, Florian Huhn, Matteo Novara, Daniel Garaboa Paz, Christian J. Kähler, Moritz Linkmann

Abstract: Using curvature and torsion to describe Lagrangian trajectories gives a full description of these as well as an insight into small and large time scales as temporal derivatives up to order 3 are involved. One might expect that the statistics of these properties depend on the geometry of the flow. Therefore, we calculated curvature and torsion probability density functions (PDFs) of experimental La… ▽ More Using curvature and torsion to describe Lagrangian trajectories gives a full description of these as well as an insight into small and large time scales as temporal derivatives up to order 3 are involved. One might expect that the statistics of these properties depend on the geometry of the flow. Therefore, we calculated curvature and torsion probability density functions (PDFs) of experimental Lagrangian trajectories processed using the Shake-the-Box algorithm of turbulent von Kármán flow, Rayleigh-Bénard convection and a zero-pressure-gradient turbulent boundary layer over a flat plate. The results for the von Kármán flow compare well with previous experimental results for the curvature PDF and numerical simulation of homogeneous and isotropic turbulence for the torsion PDF. Results for Rayleigh-Bénard convection agree with those obtained for Kármán flow, while results for the logarithmic layer within the boundary layer differ slightly, and we provide a potential explanation. To detect and quantify the effect of anisotropy either resulting from a mean flow or large-scale coherent motions on the geometry or tracer particle trajectories, we introduce the curvature vector. We connect its statistics with those of velocity fluctuations and demonstrate that strong large-scale motion in a given spatial direction results in meandering rather than helical trajectories. △ Less

Submitted 31 October, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Flow profiles near receding three--phase contact lines: Influence of surfactants

Authors: Benedikt B. Straub, Henrik Schmidt, Peyman Rostami, Franziska Henrich, Massimiliano Rossi, Christian J. Kähler, Hans-Jürgen Butt, Günter K. Auernhammer

Abstract: The dynamics of wetting and dewetting is largely determined by the velocity field near the contact lines. For water drops it has been observed that adding surfactant decreases the dynamic receding contact angle even at a concentration much lower than the critical micelle concentration (CMC). To better understand why surfactants have such a drastic effect on drop dynamics, we constructed a dedicate… ▽ More The dynamics of wetting and dewetting is largely determined by the velocity field near the contact lines. For water drops it has been observed that adding surfactant decreases the dynamic receding contact angle even at a concentration much lower than the critical micelle concentration (CMC). To better understand why surfactants have such a drastic effect on drop dynamics, we constructed a dedicated a setup on an inverted microscope, in which an aqueous drop is held stationary while the transparent substrate is moved horizontally. Using astigmatism particle tracking velocimetry, we track the 3D displacement of the tracer particles in the flow. We study how surfactants alter the flow dynamics near the receding contact line of a moving drop for capillary numbers in the order of $10^{-6}$. Even for surfactant concentrations $c$ far below the critical micelle concentration ($c \ll$ CMC) Marangoni stresses change the flow drastically. We discuss our results first in a 2D model that considers advective and diffusive surfactant transport and deduce estimates of the magnitude and scaling of the Marangoni stress from this. Modeling and experiment agree that a tiny gradient in surface tension of a few $μN \, m^{-1}$ is enough to alter the flow profile significantly. The variation of the Marangoni stress with the distance from the contact line suggests that the 2D advection-diffusion model has to be extended to a full 3D model. The effect is ubiquitous, since surfactant is present in many technical and natural dewetting processes either deliberately or as contamination. △ Less

Submitted 3 August, 2021; v1 submitted 26 May, 2021; originally announced May 2021.

Comments: 12 pages, 7 figure plus supporting information

Size-dependent particle migration and trap** in 3D microbubble streaming flows

Authors: Andreas Volk, Massimiliano Rossi, Bhargav Rallabandi, Christian J. Kaehler, Sascha Hilgenfeldt, Alvaro Marin

Abstract: Acoustically actuated sessile bubbles can be used as a tool to manipulate microparticles, vesicles and cells. In this work, using acoustically actuated sessile semi-cylindrical microbubbles, we demonstrate experimentally that finite-sized microparticles undergo size-sensitive migration and trap** towards specific spatial positions in three dimensions with high reproducibility. The particle traje… ▽ More Acoustically actuated sessile bubbles can be used as a tool to manipulate microparticles, vesicles and cells. In this work, using acoustically actuated sessile semi-cylindrical microbubbles, we demonstrate experimentally that finite-sized microparticles undergo size-sensitive migration and trap** towards specific spatial positions in three dimensions with high reproducibility. The particle trajectories are successfully reproduced by passive advection of the particles in a steady three-dimensional streaming flow field augmented with volume exclusion from the confining boundaries. For different particle sizes, this volume exclusion mechanism leads to three regimes of qualitatively different migratory behavior, suggesting applications for separating, trap**, and sorting of particles in three dimensions. △ Less

Submitted 19 November, 2020; v1 submitted 27 September, 2020; originally announced September 2020.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. Fluids 5, 114201 (2020)

Characterizing the turbulent drag properties of rough surfaces with a Taylor--Couette setup

Authors: Pieter Berghout, Pim A. Bullee, Thomas Fuchs, Sven Scharnowski, Christian J. Kähler, Daniel Chung, Detlef Lohse, Sander G. Huisman

Abstract: Wall-roughness induces extra drag in wall-bounded turbulent flows. Map** any given roughness geometry to its fluid dynamic behaviour has been hampered by the lack of accurate and direct measurements of skin-friction drag. Here the Taylor-Couette (TC) system provides an opportunity as it is a closed system and allows to directly and reliably measure the skin-friction. However, the wall-curvature… ▽ More Wall-roughness induces extra drag in wall-bounded turbulent flows. Map** any given roughness geometry to its fluid dynamic behaviour has been hampered by the lack of accurate and direct measurements of skin-friction drag. Here the Taylor-Couette (TC) system provides an opportunity as it is a closed system and allows to directly and reliably measure the skin-friction. However, the wall-curvature potentially complicates the connection between the wall friction and the wall roughness characteristics. Here we investigate the effects of a hydrodynamically fully rough surface on highly turbulent, inner cylinder rotating, TC flow. We find that the effects of a hydrodynamically fully rough surface on TC turbulence, where the roughness height k is three orders of magnitude smaller than the Obukhov curvature length Lc (which characterizes the effects of curvature on the turbulent flow, see Berghout et al. arXiv: 2003.03294, 2020), are similar to those effects of a fully rough surface on a flat plate turbulent boundary layer (BL). Hence, the value of the equivalent sand grain height ks, that characterizes the drag properties of a rough surface, is similar to those found for comparable sandpaper surfaces in a flat plate BL. Next, we obtain the dependence of the torque (skin-friction drag) on the Reynolds number for given wall roughness, characterized by ks, and find agreement with the experimental results within 5 percent. Our findings demonstrate that global torque measurements in the TC facility are well suited to reliably deduce wall drag properties for any rough surface. △ Less

Submitted 14 September, 2020; originally announced September 2020.

Comments: 18 pages, 13 figures

Solutal Marangoni flow as the cause of ring stains from drying salty colloidal drops

Authors: Alvaro Marin, Stefan Karpitschka, Diego Noguera-Marín, Miguel A. Cabrerizo-Vílchez, Massimiliano Rossi, Christian J. Kähler, Miguel A. Rodríguez Valverde

Abstract: Evaporating salty droplets are ubiquitous in nature, in our home and in the laboratory. Interestingly, the transport processes in such apparently simple systems differ strongly from evaporating "freshwater" droplets since convection is partly inverted due to Marangoni stresses. Such an effect has crucial consequences to the salt crystallization process and to the deposits left behind. In this work… ▽ More Evaporating salty droplets are ubiquitous in nature, in our home and in the laboratory. Interestingly, the transport processes in such apparently simple systems differ strongly from evaporating "freshwater" droplets since convection is partly inverted due to Marangoni stresses. Such an effect has crucial consequences to the salt crystallization process and to the deposits left behind. In this work we show unprecedented measurements that, not only confirm clearly the patterns of the flow inversion, but also elucidate their impact on the distribution of non-volatile solutes. Contrary to what has been often reported in the literature, such a flow reversal does not prevent the formation of ring-shaped stains: particles accumulate at the contact line driven solely by the interfacial flow. We can therefore conclude that the classical "coffee-stain effect" is not the only mechanism that can generate ring-shaped stains in evaporating droplets. △ Less

Submitted 20 September, 2018; originally announced September 2018.

Journal ref: Phys. Rev. Fluids 4, 041601 (2019)

Clogging in constricted suspension flows

Authors: Alvaro Marin, Henri Lhuissier, Massimiliano Rossi, Christian J. Kaehler

Abstract: The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry granular systems: For small values of the neck-to-particle size ratio (D/d<3), clogs form randomly as arches of particle span the constriction. The statistics of the… ▽ More The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry granular systems: For small values of the neck-to-particle size ratio (D/d<3), clogs form randomly as arches of particle span the constriction. The statistics of the clogging events are Poissonian as reported for granular systems and agree, for moderate particle volume fraction ($φ\approx20\%$), with a simple stochastic model for the number of particles at the neck. For larger neck sizes (D/d>3), even at the largest $φ$ ($\approx60\%$) achievable in the experiments, an uninterrupted particle flow is observed, which resembles that of an hourglass. This particularly small value of D/d at the transition to a practically uninterrupted flow is attributed to the low effective friction between the particles, achieved by the particle's functionalization and lubrication. △ Less

Submitted 16 November, 2017; originally announced November 2017.

Journal ref: Phys. Rev. E 97, 021102 (2018)

Extensive characterization of a high Reynolds number decelerating boundary layer using advanced optical metrology

Authors: C. Cuvier, S. Srinath, M. Stanislas, J. -M. Foucaut, J. -P. Laval, C. J. Kähler, R. Hain, S. Scharnowski, A. Schröder, R. Geisler, J. Agocs, A. Röse, C. Willert, J. Klinner, O. Amili, C. Atkinson, J. Soria

Abstract: An experiment conducted in the framework of the EUHIT project and designed to characterize large scale structures in an adverse pressure gradient boundary layer flow is presented. Up to 16 sCMOS cameras were used in order to perform large scale turbulent boundary layer PIV measurements with a large field of view and appropriate spatial resolution. To access the span-wise / wall-normal signature of… ▽ More An experiment conducted in the framework of the EUHIT project and designed to characterize large scale structures in an adverse pressure gradient boundary layer flow is presented. Up to 16 sCMOS cameras were used in order to perform large scale turbulent boundary layer PIV measurements with a large field of view and appropriate spatial resolution. To access the span-wise / wall-normal signature of the structures as well, stereoscopic PIV measurements in span-wise/wall-normal planes were performed at specific stream-wise locations. To complement these large field of view measurements, long-range micro-PIV, time resolved near wall velocity profiles and film-based measurements were performed in order to determine the wall-shear stress and its fluctuations at some specific locations along the model. △ Less

Submitted 9 February, 2017; originally announced February 2017.

Comments: 50 pages

Surfactant-driven flow transitions in evaporating droplets

Authors: Alvaro Marin, Robert Liepelt, Massimiliano Rossi, Christian J. Kähler

Abstract: An evaporating droplet is a dynamic system in which flow is spontaneously generated to minimize the surface energy, dragging particles to the borders and ultimately resulting in the so-called "coffee-stain effect". The situation becomes more complex at the droplet's surface, where surface tension gradients of different nature can compete with each other yielding different scenarios. With careful e… ▽ More An evaporating droplet is a dynamic system in which flow is spontaneously generated to minimize the surface energy, dragging particles to the borders and ultimately resulting in the so-called "coffee-stain effect". The situation becomes more complex at the droplet's surface, where surface tension gradients of different nature can compete with each other yielding different scenarios. With careful experiments and with the aid of 3D particle tracking techniques, we are able to show that different types of surfactants turn the droplet's surface either rigid or elastic, which alters the evaporating fluid flow, either enhancing the classical coffee-stain effect or leading to a total flow inversion. Our measurements lead to unprecedented and detailed measurements of the surface tension difference along an evaporating droplet's surface with good temporal and spatial resolution. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Comments: Accepted for publication in Soft Matter (RSC)

Growth control of sessile microbubbles in PDMS devices

Authors: Andreas Volk, Massimiliano Rossi, Christian J. Kähler, Sascha Hilgenfeldt, Alvaro Marin

Abstract: In a microfluidic environment, the presence of bubbles is often detrimental to the functionality of the device, leading to clogging or cavitation, but microbubbles can also be an indispensable asset in other applications such as microstreaming. In either case, it is crucial to understand and control the growth or shrinkage of these bodies of air, in particular in common soft-lithography devices ba… ▽ More In a microfluidic environment, the presence of bubbles is often detrimental to the functionality of the device, leading to clogging or cavitation, but microbubbles can also be an indispensable asset in other applications such as microstreaming. In either case, it is crucial to understand and control the growth or shrinkage of these bodies of air, in particular in common soft-lithography devices based on polydimethylsiloxane (PDMS), which is highly permeable to gases. In this work, we study the gas transport into and out of a bubble positioned in a microfluidic device, taking into account the direct gas exchange through PDMS as well as the transport of gas through the liquid in the device. Hydrostatic pressure regulation allows for the quantitative control of growth, shrinkage, or the attainment of a stable equilibrium bubble size. We find that the vapor pressure of the liquid plays an important role for the balance of gas transport, accounting for variability in experimental conditions and suggesting additional means of bubble size control in applications. △ Less

Submitted 2 December, 2015; v1 submitted 5 October, 2015; originally announced October 2015.

Comments: 6 pages, supplementary information and cover included in ancillary files

Journal ref: Lab Chip, 15, 4607-4613 (2015)

Three-dimensional phenomena in microbubble acoustic streaming

Authors: Alvaro Marin, Massimiliano Rossi, Bhargav Rallabandi, Cheng Wang, Sascha Hilgenfeldt, Christian J. Kähler

Abstract: Ultrasound-driven oscillating micro-bubbles have been used as active actuators in microfluidic devices to perform manifold tasks such as mixing, sorting and manipulation of microparticles. A common configuration consists on side-bubbles, created by trap** air pockets in blind channels perpendicular to the main channel direction. This configuration consists of acoustically excited bubbles with a… ▽ More Ultrasound-driven oscillating micro-bubbles have been used as active actuators in microfluidic devices to perform manifold tasks such as mixing, sorting and manipulation of microparticles. A common configuration consists on side-bubbles, created by trap** air pockets in blind channels perpendicular to the main channel direction. This configuration consists of acoustically excited bubbles with a semi-cylindrical shape that generate significant streaming flow. Due to the geometry of the channels, such flows have been generally considered as quasi two-dimensional. Similar assumptions are often made in many other microfluidic systems based on \emph{flat} micro-channels. However, in this paper we show that microparticle trajectories actually present a much richer behavior, with particularly strong out-of-plane dynamics in regions close to the microbubble interface. Using Astigmatism Particle Tracking Velocimetry, we reveal that the apparent planar streamlines are actually projections of a \emph{streamsurface} with a pseudo-toroidal shape. We therefore show that acoustic streaming cannot generally be assumed as a two-dimensional phenomenon in confined systems. The results have crucial consequences for most of the applications involving acoustic streaming as particle trap**, sorting and mixing. △ Less

Submitted 13 March, 2015; originally announced March 2015.

Comments: 5 pages, 4 high quality figures. Accepted for Publication in Phys. Rev. Applied, March 2015

Ultrasound-induced acoustophoretic motion of microparticles in three dimensions

Authors: Peter B. Muller, Massimiliano Rossi, Alvaro G. Marin, Rune Barnkob, Per Augustsson, Thomas Laurell, Christian J. Kaehler, Henrik Bruus

Abstract: We derive analytical expressions for the three-dimensional (3D) acoustophoretic motion of spherical microparticles in rectangular microchannels. The motion is generated by the acoustic radiation force and the acoustic streaming-induced drag force. In contrast to the classical theory of Rayleigh streaming in shallow, infinite, parallel-plate channels, our theory does include the effect of the micro… ▽ More We derive analytical expressions for the three-dimensional (3D) acoustophoretic motion of spherical microparticles in rectangular microchannels. The motion is generated by the acoustic radiation force and the acoustic streaming-induced drag force. In contrast to the classical theory of Rayleigh streaming in shallow, infinite, parallel-plate channels, our theory does include the effect of the microchannel side walls. The resulting predictions agree well with numerics and experimental measurements of the acoustophoretic motion of polystyrene spheres with nominal diameters of 0.537 um and 5.33 um. The 3D particle motion was recorded using astigmatism particle tracking velocimetry under controlled thermal and acoustic conditions in a long, straight, rectangular microchannel actuated in one of its transverse standing ultrasound-wave resonance modes with one or two half-wavelengths. The acoustic energy density is calibrated in situ based on measurements of the radiation dominated motion of large 5-um-diam particles, allowing for quantitative comparison between theoretical predictions and measurements of the streaming induced motion of small 0.5-um-diam particles. △ Less

Submitted 1 March, 2013; originally announced March 2013.

Comments: 13 pages, 8 figures, Revtex 4.1

Journal ref: Phys Rev E 88, 023006 (2013)

Logarithmic boundary layers in highly turbulent Taylor-Couette flow

Authors: Sander G. Huisman, Sven Scharnowski, Christian Cierpka, Christian J. Kahler, Detlef Lohse, Chao Sun

Abstract: We provide direct measurements of the boundary layer properties in highly turbulent Taylor-Couette flow up to $\text{Ta}=6.2 \times 10^{12}$ using high-resolution particle image velocimetry (PIV). We find that the mean azimuthal velocity profile at the inner and outer cylinder can be fitted by the von Kármán log law $u^+ = \frac 1κ\ln y^+ +B$. The von Kármán constant $κ$ is found to depend on the… ▽ More We provide direct measurements of the boundary layer properties in highly turbulent Taylor-Couette flow up to $\text{Ta}=6.2 \times 10^{12}$ using high-resolution particle image velocimetry (PIV). We find that the mean azimuthal velocity profile at the inner and outer cylinder can be fitted by the von Kármán log law $u^+ = \frac 1κ\ln y^+ +B$. The von Kármán constant $κ$ is found to depend on the driving strength $\text{Ta}$ and for large $\text{Ta}$ asymptotically approaches $κ\approx 0.40$. The variance profiles of the local azimuthal velocity have a universal peak around $y^+ \approx 12$ and collapse when rescaled with the driving velocity (and not with the friction velocity), displaying a log-dependence of $y^+$ as also found for channel and pipe flows [1,2]. △ Less

Submitted 25 February, 2013; originally announced February 2013.

Enhanced empirical data for the fundamental diagram and the flow through bottlenecks

Authors: A. Seyfried, M. Boltes, J. Kähler, W. Klingsch, A. Portz, T. Rupprecht, A. Schadschneider, B. Steffen, A. Winkens

Abstract: In recent years, several approaches for modelling pedestrian dynamics have been proposed and applied e.g. for design of egress routes. However, so far not much attention has been paid to their 'quantitative' validation. This unsatisfactory situation belongs amongst others on the uncertain and contradictory experimental data base. The fundamental diagram, i.e. the density-dependence of the flow o… ▽ More In recent years, several approaches for modelling pedestrian dynamics have been proposed and applied e.g. for design of egress routes. However, so far not much attention has been paid to their 'quantitative' validation. This unsatisfactory situation belongs amongst others on the uncertain and contradictory experimental data base. The fundamental diagram, i.e. the density-dependence of the flow or velocity, is probably the most important relation as it connects the basic parameter to describe the dynamic of crowds. But specifications in different handbooks as well as experimental measurements differ considerably. The same is true for the bottleneck flow. After a comprehensive review of the experimental data base we give an survey of a research project, including experiments with up to 250 persons performed under well controlled laboratory conditions. The trajectories of each person are measured in high precision to analyze the fundamental diagram and the flow through bottlenecks. The trajectories allow to study how the way of measurement influences the resulting relations. Surprisingly we found large deviation amongst the methods. These may be responsible for the deviation in the literature mentioned above. The results are of particular importance for the comparison of experimental data gained in different contexts and for the validation of models. △ Less

Submitted 10 October, 2008; originally announced October 2008.

Comments: A contribution to: Pedestrian and Evacuation Dynamics 2008 (Springer) 12 pages, 7 figures