-
Towards practical mass spectrometry with nanomechanical pillar resonators by surface acoustic wave transduction
Authors:
Hendrik Kähler,
Robert Winkler,
Holger Arthaber,
Harald Plank,
Silvan Schmid
Abstract:
Nanoelectromechanical systems (NEMS) have proven outstanding performance in the detection of small masses down to single proton sensitivity. To obtain a high enough throughput for the application in practical mass spectrometry, NEMS resonators have to be arranged in two-dimensional (2D) arrays. However, all state-of-the-art electromechanical transduction methods rely on electrical lines placed clo…
▽ More
Nanoelectromechanical systems (NEMS) have proven outstanding performance in the detection of small masses down to single proton sensitivity. To obtain a high enough throughput for the application in practical mass spectrometry, NEMS resonators have to be arranged in two-dimensional (2D) arrays. However, all state-of-the-art electromechanical transduction methods rely on electrical lines placed close to the mechanical resonators, which drastically restricts the density of 2D resonator arrays. An exception is the transduction by surface acoustic waves (SAWs), which has so far only been shown for the transduction of single nanomechanical pillar resonators. Here, we demonstrate the transduction of pillar pairs by surface acoustic waves. The pillars have a diameter of 700 nm and show a mass responsivity of -588$\pm$98 ng$^{-1}$. The distances between the pillar pairs are 70 nm and 14.3 $μ$m. SAW transduction enabled us to measure both pillars of each pair with electrical lines no closer than 300 $μ$m, illustrating the potential of SAWs to transduce dense arrays of pillar resonators, a crucial step towards practical mass spectrometry with NEMS.
△ Less
Submitted 12 March, 2023;
originally announced March 2023.
-
Transduction of single nanomechanical pillar resonators by scattering of surface acoustic waves
Authors:
Hendrik Kähler,
Holger Arthaber,
Robert Winkler,
Robert G. West,
Ioan Ignat,
Harald Plank,
Silvan Schmid
Abstract:
One of the challenges of nanoelectromechanical systems (NEMS) is the effective transduction of the tiny resonators. Vertical structures, such as nanomechanical pillar resonators, which are exploited in a wide range of fields, such as optomechanics, acoustic metamaterials, and nanomechanical sensing, are particularly challenging to transduce. Existing electromechanical transduction methods are ill-…
▽ More
One of the challenges of nanoelectromechanical systems (NEMS) is the effective transduction of the tiny resonators. Vertical structures, such as nanomechanical pillar resonators, which are exploited in a wide range of fields, such as optomechanics, acoustic metamaterials, and nanomechanical sensing, are particularly challenging to transduce. Existing electromechanical transduction methods are ill-suited as they complicate the pillars' fabrication process, put constraints on the pillars' material, and do not enable a transduction of freestanding pillars. Here, we present an electromechanical transduction method for single nanomechanical pillar resonators based on surface acoustic waves (SAWs). We demonstrate the transduction of freestanding nanomechanical platinum-carbon pillars in the first-order bending and compression mode. Since the principle of the transduction method is based on resonant scattering of a SAW by a nanomechanical resonator, our transduction method is independent of the pillar's material and not limited to pillar-shaped geometries. It represents a general method to transduce vertical mechanical resonators with nanoscale lateral dimensions.
△ Less
Submitted 27 February, 2023; v1 submitted 17 October, 2022;
originally announced October 2022.
-
Frequency fluctuations in nanomechanical silicon nitride string resonators
Authors:
Pedram Sadeghi,
Alper Demir,
Luis Guillermo Villanueva,
Hendrik Kähler,
Silvan Schmid
Abstract:
High quality factor ($Q$) nanomechanical resonators have received a lot of attention for sensor applications with unprecedented sensitivity. Despite the large interest, few investigations into the frequency stability of high-$Q$ resonators have been reported. Such resonators are characterized by a linewidth significantly smaller than typically employed measurement bandwidths, which is the opposite…
▽ More
High quality factor ($Q$) nanomechanical resonators have received a lot of attention for sensor applications with unprecedented sensitivity. Despite the large interest, few investigations into the frequency stability of high-$Q$ resonators have been reported. Such resonators are characterized by a linewidth significantly smaller than typically employed measurement bandwidths, which is the opposite regime to what is normally considered for sensors. Here, the frequency stability of high-$Q$ silicon nitride string resonators is investigated both in open-loop and closed-loop configurations. The stability is here characterized using the Allan deviation. For open-loop tracking, it is found that the Allan deviation gets separated into two regimes, one limited by the thermomechanical noise of the resonator and the other by the detection noise of the optical transduction system. The point of transition between the two regimes is the resonator response time, which can be shown to have a linear dependence on $Q$. Laser power fluctuations from the optical readout is found to present a fundamental limit to the frequency stability. Finally, for closed-loop measurements, the response time is shown to no longer be intrinsically limited but instead given by the bandwidth of the closed-loop tracking system. Computed Allan deviations based on theory are given as well and found to agree well with the measurements. These results are of importance for the understanding of fundamental limitations of high-$Q$ resonators and their application as high performance sensors.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Surface acoustic wave coupling between micromechanical resonators
Authors:
Hendrik Kähler,
Daniel Platz,
Silvan Schmid
Abstract:
The coupling of micro- or nanomechanical resonators via a shared substrate is intensively exploited to built systems for fundamental studies and practical applications. So far, the focus has been on devices operating in the kHz regime with a spring-like coupling. At resonance frequencies above several 10 MHz, wave propagation in the solid substrate becomes relevant. The resonators act as sources f…
▽ More
The coupling of micro- or nanomechanical resonators via a shared substrate is intensively exploited to built systems for fundamental studies and practical applications. So far, the focus has been on devices operating in the kHz regime with a spring-like coupling. At resonance frequencies above several 10 MHz, wave propagation in the solid substrate becomes relevant. The resonators act as sources for surface acoustic waves (SAWs) and it is unknown how this effects the coupling between them. Here, we present a model for MHz frequency resonators interacting by SAWs and derive the eigenfrequencies and quality factors of a pair of resonators for the symmetric and antisymmetric mode. Our results are in agreement with finite element method (FEM) simulations and show that in contrast to the well-known strain-induced spring-like coupling, the coupling via SAWs is not only dispersive but also dissipative. This can be exploited to realize high quality phonon cavities, an alternative to acoustic radiation shielding by, e.g. phononic crystals.
△ Less
Submitted 27 August, 2021; v1 submitted 26 June, 2020;
originally announced June 2020.
-
Ultrathin 2 nm gold as ideal impedance-matched absorber for infrared light
Authors:
Niklas Luhmann,
Dennis Høj,
Markus Piller,
Hendrik Kähler,
Miao-Hsuan Chien,
Robert G. West,
Ulrik Lund Andersen,
Silvan Schmid
Abstract:
Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resista…
▽ More
Thermal detectors are a cornerstone of infrared (IR) and terahertz (THz) technology due to their broad spectral range. These detectors call for suitable broad spectral absorbers with minimalthermal mass. Often this is realized by plasmonic absorbers, which ensure a high absorptivity butonly for a narrow spectral band. Alternativly, a common approach is based on impedance-matching the sheet resistance of a thin metallic film to half the free-space impedance. Thereby, it is possible to achieve a wavelength-independent absorptivity of up to 50 %, depending on the dielectric properties of the underlying substrate. However, existing absorber films typicallyrequire a thickness of the order of tens of nanometers, such as titanium nitride (14 nm), whichcan significantly deteriorate the response of a thermal transducers. Here, we present the application of ultrathin gold (2 nm) on top of a 1.2 nm copper oxide seed layer as an effective IR absorber. An almost wavelength-independent and long-time stable absorptivity of 47(3) %, ranging from 2 $μ$m to 20 $μ$m, could be obtained and is further discussed. The presented gold thin-film represents analmost ideal impedance-matched IR absorber that allows a significant improvement of state-of-the-art thermal detector technology.
△ Less
Submitted 29 November, 2019;
originally announced November 2019.
-
Parallel family trees for transfer matrices in the Potts model
Authors:
Cristobal A. Navarro,
Fabrizio Canfora,
Nancy Hitschfeld Kahler,
Gonzalo Navarro
Abstract:
The computational cost of transfer matrix methods for the Potts model is directly related to the problem of \textit{into how many ways can two adjacent blocks of a lattice be connected}. Answering this question leads to the generation of a combinatorial set of lattice configurations. This set defines the \textit{configuration space} of the problem, and the smaller it is, the faster the transfer ma…
▽ More
The computational cost of transfer matrix methods for the Potts model is directly related to the problem of \textit{into how many ways can two adjacent blocks of a lattice be connected}. Answering this question leads to the generation of a combinatorial set of lattice configurations. This set defines the \textit{configuration space} of the problem, and the smaller it is, the faster the transfer matrix method can be. The configuration space of generic transfer matrix methods for strip lattices in the Potts model is in the order of the Catalan numbers, leading to an asymptotic cost of $O(4^m)$ with $m$ being the width of the strip. Transfer matrix methods with a smaller configuration space indeed exist but they make assumptions on the temperature, number of spin states, or restrict the topology of the lattice in order to work. In this paper we propose a general and parallel transfer matrix method, based on family trees, that uses a sub-Catalan configuration space of size $O(3^m)$. The improvement is achieved by grou** the original set of Catalan configurations into a forest of family trees, in such a way that the solution to the problem is now computed by just solving the root node of each family. As a result, the algorithm becomes exponentially faster and highly parallel. An additional advantage is that the final matrix ends up being compressed, not only saving space but also making numerical evaluation on $(q,v)$ faster than in a non-compressed scenario. Experimental results for different sizes of strip lattices show that the \textit{Parallel family trees (PFT)} strategy indeed runs exponentially faster than the \textit{Catalan Parallel Method (CPM)}, specially when dealing with dense transfer matrices. We can confirm that a parallel implementation of the PFT algorithm is highly effective and efficient for large problem sizes...
△ Less
Submitted 13 October, 2014; v1 submitted 9 December, 2013;
originally announced December 2013.
-
Multi-core computation of transfer matrices for strip lattices in the Potts model
Authors:
Cristobal A. Navarro,
Fabrizio Canfora,
Nancy Hitschfeld Kahler
Abstract:
The transfer-matrix technique is a convenient way for studying strip lattices in the Potts model since the compu- tational costs depend just on the periodic part of the lattice and not on the whole. However, even when the cost is reduced, the transfer-matrix technique is still an NP-hard problem since the time T(|V|, |E|) needed to compute the matrix grows ex- ponentially as a function of the grap…
▽ More
The transfer-matrix technique is a convenient way for studying strip lattices in the Potts model since the compu- tational costs depend just on the periodic part of the lattice and not on the whole. However, even when the cost is reduced, the transfer-matrix technique is still an NP-hard problem since the time T(|V|, |E|) needed to compute the matrix grows ex- ponentially as a function of the graph width. In this work, we present a parallel transfer-matrix implementation that scales performance under multi-core architectures. The construction of the matrix is based on several repetitions of the deletion- contraction technique, allowing parallelism suitable to multi-core machines. Our experimental results show that the multi-core implementation achieves speedups of 3.7X with p = 4 processors and 5.7X with p = 8. The efficiency of the implementation lies between 60% and 95%, achieving the best balance of speedup and efficiency at p = 4 processors for actual multi-core architectures. The algorithm also takes advantage of the lattice symmetry, making the transfer matrix computation to run up to 2X faster than its non-symmetric counterpart and use up to a quarter of the original space.
△ Less
Submitted 13 August, 2013; v1 submitted 27 May, 2013;
originally announced May 2013.
-
The structure of contact binaries
Authors:
H. Kaehler
Abstract:
In radiative layers of rotating stars the luminosity carried by circulation currents through a surface of constant entropy (circulation luminosity) is shown to be positive. The corresponding decrease in the temperature gradient is important in the secondary of contact binaries. This result removes the deadlock in the theory of contact binaries. The resulting treatment of contact binaries is inve…
▽ More
In radiative layers of rotating stars the luminosity carried by circulation currents through a surface of constant entropy (circulation luminosity) is shown to be positive. The corresponding decrease in the temperature gradient is important in the secondary of contact binaries. This result removes the deadlock in the theory of contact binaries. The resulting treatment of contact binaries is investigated, assuming thermal equilibrium. If the circulation luminosity is adjusted to give a prescribed temperature difference between the components, details turn out to be unimportant. The temperature difference is bound to be positive. The fractional extent of radiative regions is larger in the secondary than in the primary. In the course of evolution the period increases and the mass ratio decreases. A survey of unevolved and evolved contact configurations is presented. Observational tests are passed. In stable systems the degree of contact is small. Stable systems in the period-colour diagram, unevolved and evolved, cover the strip of observed systems. Lower limits for period and effective temperature, compatible with the observed limits, are caused by the requirement of thermal stability. Stable systems with mass ratios very close to unity are possible, in accordance with recent observations. These results support the assumption of thermal equilibrium as well as the treatment of the stability problem. Models for individual observed systems are well-determined and can be used to calibrate the efficiency of the energy transfer between the components and to determine metallicity and age. The results show that evolutionary effects are important and that the efficiency is very small.
△ Less
Submitted 4 November, 2003;
originally announced November 2003.
