-
Strain rate controls alignment in growing bacterial monolayers
Authors:
Blake Langeslay,
Gabriel Juarez
Abstract:
Growing monolayers of rod-shaped bacteria exhibit local alignment similar to extensile active nematics. When confined in a channel or growing inward from a ring, the local nematic order of these monolayers changes to a global ordering with cells throughout the monolayer orienting in the same direction. The mechanism behind this phenomenon is so far unclear, as previously proposed mechanisms fail t…
▽ More
Growing monolayers of rod-shaped bacteria exhibit local alignment similar to extensile active nematics. When confined in a channel or growing inward from a ring, the local nematic order of these monolayers changes to a global ordering with cells throughout the monolayer orienting in the same direction. The mechanism behind this phenomenon is so far unclear, as previously proposed mechanisms fail to predict the correct alignment direction in one or more confinement geometries. We present a strain-based model relating net deformation of the growing monolayer to the cell-level deformation resulting from single-cell growth and rotation, producing predictions of cell orientation behavior based on the velocity field in the monolayer. This model correctly predicts the direction of preferential alignment in channel-confined, inward-growing, and unconfined colonies. The model also quantitatively predicts orientational order when the velocity field has no net negative strain rate in any direction. We further test our model in simulations of expanding colonies confined to spherical surfaces. Our model and simulations agree that cells away from the origin cell orient radially relative to the colony's center. Additionally, our model's quantitative prediction of the orientational order agrees with the simulation results in the top half of the sphere but fails in the lower half where there is a net negative strain rate. The success of our model bridges the gap between previous works on cell alignment in disparate confinement geometries and provides insight into the underlying physical effects responsible for large-scale alignment.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Stress and Alignment Response to Curved Obstacles in Growing Bacterial Monolayers
Authors:
Blake Langeslay,
Will Fahy,
Gabriel Juarez
Abstract:
Monolayers of growing bacteria, confined within channel geometries, exhibit self-organization into a highly aligned laminar state along the axis of the channel. Although this phenomenon has been observed in experiments and simulations under various boundary conditions, the underlying physical mechanism driving this alignment remains unclear. In this study, we conduct simulations of growing bacteri…
▽ More
Monolayers of growing bacteria, confined within channel geometries, exhibit self-organization into a highly aligned laminar state along the axis of the channel. Although this phenomenon has been observed in experiments and simulations under various boundary conditions, the underlying physical mechanism driving this alignment remains unclear. In this study, we conduct simulations of growing bacteria in 2D channel geometries perturbed by fixed obstacles, either circular or arc-shaped, placed at the channel's center. Our findings reveal that even sizable obstacles cause only short-ranged disruptions to the baseline laminar state. These disruptions arise from a competition between local planar anchoring and bulk laminar alignment. At smaller obstacle sizes, bulk alignment fully dominates, while at larger sizes, planar anchoring induces increasing local disruptions. Furthermore, our analysis indicates that the resulting configurations of the bacterial system display a striking resemblance to the arrangement of hard-rod smectic liquid crystals around circular obstacles. This suggests that modeling hard-rod bacterial monolayers as smectic, rather than nematic, liquid crystals may yield successful outcomes. The insights gained from our study contribute to the expanding body of research on bacterial growth in channels. Our work provides new perspectives on the stability of the laminar state and extends our understanding to encompass more intricate confinement schemes.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
The effect of surface topography on benthic boundary layer flow: implications for marine larval transport and settlement
Authors:
Daniel Gysbers,
Mark A. Levenstein,
Gabriel Juarez
Abstract:
The effect of substrate topography on the settlement of coral larvae in wave-driven oscillatory flow is investigated using computational fluid dynamics coupled to a 2D agent-based simulation of individual larvae. Substrate topography modifies the boundary layer flow by generating vortices within roughness features that can be ejected into the bulk flow, directly influencing larval transport and se…
▽ More
The effect of substrate topography on the settlement of coral larvae in wave-driven oscillatory flow is investigated using computational fluid dynamics coupled to a 2D agent-based simulation of individual larvae. Substrate topography modifies the boundary layer flow by generating vortices within roughness features that can be ejected into the bulk flow, directly influencing larval transport and settlement. In agreement with recent experimental findings, millimeter-scale ridged topographies were found to increase settlement compared to sub-mm feature heights. At this length scale, ridge spacing-to-height ratios of 10 to 20, spacings of more than 30 coral larval body lengths, resulted in the highest settlement rates. These optimal topographies produce a high averaged vertical velocity variance in the bulk flow, indicating that vertical larval movement to benthic surfaces is dominated by passive transport driven by recirculatory flow structures. Indeed, larval settlement was found to be positively correlated with mean vertical velocity variance, and settlement results with substrates comprising complex multiscale roughness were quantitatively similar to those with a simple rectangular model. Our findings reveal how substrates can be designed with surface features to promote larval settlement in natural flow conditions above shallow coral reefs independent of biological cues and substrate material composition.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Growth-induced phase changes in swimming bacteria at finite liquid interfaces
Authors:
Blake Langeslay,
Gabriel Juarez
Abstract:
We introduce a system of bacteria confined to a finite 2D oil-water interface and driven on two distinct time scales by motility and by growth. The combined effect of activity on different time scales creates transitions between several common collective behaviors. These transitions are observed using time-lapse microscopy with high spatial and temporal resolution over eight hours. We sequentially…
▽ More
We introduce a system of bacteria confined to a finite 2D oil-water interface and driven on two distinct time scales by motility and by growth. The combined effect of activity on different time scales creates transitions between several common collective behaviors. These transitions are observed using time-lapse microscopy with high spatial and temporal resolution over eight hours. We sequentially observe an initial dilute state, a clustered state, an active turbulent state, and a glassy state, and we are able to directly observe and characterize the transitions between these states. This system allows the investigation of emergent effects surrounding transitions between phases, expanding on studies that have considered them in isolation. In particular, a peak in the velocity correlation length is observed at the turbulent-glassy transition, suggesting that this transition significantly increases the active turbulent length scale.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Synchronous oscillatory electro-inertial focusing of microparticles
Authors:
Giridar Vishwanathan,
Gabriel Juarez
Abstract:
Here, results are presented on the focusing of $1 \ μ$m polystyrene particle suspensions using a synchronous oscillatory pressure-driven flow and oscillatory electric field in a microfluidic device. The effect of the phase difference between the oscillatory fields on the focusing position and focusing efficiency was investigated. The focusing position of negatively charged polystyrene particles co…
▽ More
Here, results are presented on the focusing of $1 \ μ$m polystyrene particle suspensions using a synchronous oscillatory pressure-driven flow and oscillatory electric field in a microfluidic device. The effect of the phase difference between the oscillatory fields on the focusing position and focusing efficiency was investigated. The focusing position of negatively charged polystyrene particles could be tuned anywhere between the channel centerline to the channel walls. Similarly, the focusing efficiency could range from $20\%$ up to $90\%$, depending on the phase difference, for particle Reynolds numbers of order $O(10^{-4})$. The migration velocity profile was measured and the peak velocity was found to scale linearly with both the oscillatory pressure-driven flow amplitude and oscillatory electric field amplitude. Furthermore, the average migration velocity was observed to scale with the cosine of the phase difference between the fields, indicating the coupled non-linear nature of the phenomenon. Lastly, the peak migration velocity was measured for different particle radii and found to have an inverse relation, where the velocity increased with decreasing particle radius for identical conditions.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
Reducing system dimensionality with long-range collective dipole-dipole interactions
Authors:
Ashwin K. Boddeti,
Yi Wang,
Xitlali G. Juarez,
Alexandra Boltasseva,
Teri W. Odom,
Vladimir Shalaev,
Hadiseh Alaeian,
Zubin Jacob
Abstract:
Dimensionality plays a crucial role in long-range dipole-dipole interactions (DDIs). We demonstrate that a resonant nanophotonic structure modifies the apparent dimensionality in an interacting ensemble of emitters, as revealed by population decay dynamics. Our measurements on a dense ensemble of interacting quantum emitters in a resonant nanophotonic structure with long-range DDIs reveal an effec…
▽ More
Dimensionality plays a crucial role in long-range dipole-dipole interactions (DDIs). We demonstrate that a resonant nanophotonic structure modifies the apparent dimensionality in an interacting ensemble of emitters, as revealed by population decay dynamics. Our measurements on a dense ensemble of interacting quantum emitters in a resonant nanophotonic structure with long-range DDIs reveal an effective dimensionality reduction to $\bar{d} = 2.20 (12)$, despite the emitters being distributed in 3D. This contrasts the homogeneous environment, where the apparent dimension is $\bar{d} = 3.00$. Our work presents a promising avenue to manipulate dimensionality in an ensemble of interacting emitters.
△ Less
Submitted 16 March, 2024; v1 submitted 8 May, 2023;
originally announced May 2023.
-
Direct observations of rising oil droplets deformed by hydrocarbonoclastic bacteria
Authors:
Vincent Hickl,
Hima Hrithik Pamu,
Gabriel Juarez
Abstract:
In marine environments, microscopic droplets of spilled oil can be transported over tens or hundreds kilometers in the water column. As this oil is biodegraded, growing bacteria on the droplets' surface can deform the oil-water interface to generate complex shapes and significantly enlarge droplets. A complete understanding of the fate and transport of spilled oil requires bridging the present gap…
▽ More
In marine environments, microscopic droplets of spilled oil can be transported over tens or hundreds kilometers in the water column. As this oil is biodegraded, growing bacteria on the droplets' surface can deform the oil-water interface to generate complex shapes and significantly enlarge droplets. A complete understanding of the fate and transport of spilled oil requires bridging the present gap between these length scales and determining how microscale processes affect large-scale transport of oil. Here, we describe experimental results describing rising oil droplets in a purpose-built hydrodynamic treadmill which rotates to keep droplets stationary in the lab frame for continuous, direct observation. Droplets of radii 10-100 $μ$m are colonized and deformed by bacteria over several days before their rising speeds through the water column are measured. Rising speeds of deformed droplets are significantly slower as a result of bio-aggregate formation at the droplet surface compared to those of droplets of weathered or unweathered oil without bacteria. Additionally, we discover bio-aggregate particles of oil and bacterial biofilms which sink through the water column. The composition of these particles is quantified using fluorescence microscopy. These results have important implications for the study of oil transport following a spill, as colonization by bacteria can cause oil droplets to remain in the water column for months or years longer than otherwise expected. An improved understanding of the physical transformations of oil droplets during biodegradation shows promise for significantly improving models of oil spills. Additionally, the formation of sinking particles of oil and bacteria presents a new vector for hydrocarbon sedimentation and potential marine oil snow formation.
△ Less
Submitted 1 December, 2022;
originally announced December 2022.
-
Microdomains and Stress Distributions in Bacterial Monolayers on Curved Interfaces
Authors:
Blake Langeslay,
Gabriel Juarez
Abstract:
Monolayers of growing non-motile rod-shaped bacteria act as active nematic materials composed of hard particles rather than the flexible components of other commonly studied active nematics. The organization of these granular monolayers has been studied on flat surfaces but not on curved surfaces, which are known to change the behavior of other active nematics. We use molecular dynamics simulation…
▽ More
Monolayers of growing non-motile rod-shaped bacteria act as active nematic materials composed of hard particles rather than the flexible components of other commonly studied active nematics. The organization of these granular monolayers has been studied on flat surfaces but not on curved surfaces, which are known to change the behavior of other active nematics. We use molecular dynamics simulations to track alignment and stress in growing monolayers fixed to curved surfaces, and investigate how these vary with changing surface curvature and cell aspect ratio. We find that the length scale of alignment (measured by average microdomain size) increases with cell aspect ratio and decreases with curvature. Additionally, we find that alignment controls the distribution of extensile stresses in the monolayer by concentrating stress in low-order regions. These results connect active nematic physics to bacterial monolayers and can be applied to model bacteria growing on droplets, such as marine oil-degrading bacteria.
△ Less
Submitted 30 November, 2022;
originally announced December 2022.
-
An in vitro living system for flow rectification
Authors:
Zhi Dou,
Liu Hong,
Zhengwei Li,
Fan Kiat Chan,
Yashraj Bhosale,
Onur Aydin,
Gabriel Juarez,
M. Taher A. Saif,
Leonardo P. Chamorro,
Mattia Gazzola
Abstract:
Small - but finite - fluid inertia can be leveraged to generate steady flows out of liquid vibrations around an immersed interface. In engineering, external high-frequency drivers (10$^2$-10$^5$ Hz) allow this inertial rectification phenomenon, known as viscous streaming, to be employed in micron-scale devices for precise flow control, particle manipulation and spatially controlled chemistry. Howe…
▽ More
Small - but finite - fluid inertia can be leveraged to generate steady flows out of liquid vibrations around an immersed interface. In engineering, external high-frequency drivers (10$^2$-10$^5$ Hz) allow this inertial rectification phenomenon, known as viscous streaming, to be employed in micron-scale devices for precise flow control, particle manipulation and spatially controlled chemistry. However, beyond artificial settings, streaming may also be accessed by larger-scale biological systems pertaining to lower frequencies. Then, millimeter-size bacteria or larvae that oscillate cilia and appendages in the 1-10Hz range may be able to endogenously rectify surrounding flows, for feeding or locomotion, removing the need for external actuators, tethers or tubings. In support of this hypothesis, here we demonstrate an in vitro living system able to produce streaming flows, endogenously, autonomously and unassisted. Computationally informed, our biological device generates oscillatory flows through the cyclic contractions of an engineered muscle tissue, shaped in the form of a ring and suspended in fluid within a Micro-Particle Image Velocimetry setup, for analysis. Flow patterns consistent with streaming simulations are observed for low-frequency muscle contractions (2-4Hz), either spontaneous or light-induced, illustrating system autonomy and controllability, respectively. Thus, this work provides experimental evidence of biologically powered streaming in untethered millimeter-scale living systems, showcasing the utility of bio-hybrid technology for fundamental and applied fluid mechanics.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Tubulation and dispersion of oil by bacterial growth on droplets
Authors:
Vincent Hickl,
Gabriel Juarez
Abstract:
Bacteria on surfaces exhibit collective behaviors, such as active turbulence and active stresses, which result from their motility, growth, and interactions with their local surroundings. However, interfacial deformations on soft surfaces and liquid interfaces caused by active growth, particularly over long time scales, are not well understood. Here, we describe experimental observations on the em…
▽ More
Bacteria on surfaces exhibit collective behaviors, such as active turbulence and active stresses, which result from their motility, growth, and interactions with their local surroundings. However, interfacial deformations on soft surfaces and liquid interfaces caused by active growth, particularly over long time scales, are not well understood. Here, we describe experimental observations on the emergence of tubular structures arising from the growth of rod-shaped bacteria at the interface of oil droplets in water. Using microfluidics and timelapse microscopy, the dimensions and extension rates of individual tubular structures as well as bulk bio-aggregate formation are quantified for hundreds of droplets over 72 hours. Tubular structures are comparable in length to the initial droplet radius and are composed of an outer shell of bacteria that stabilize an inner filament of oil. The oil filament breaks up into smaller microdroplets dispersed within the bacterial shell. This work provides insight into active stresses at deformable interfaces and improves our understanding of microbial oil biodegradation and its potential influence on the transport of droplets in the ocean water column.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Millimeter-scale topography enables coral larval settlement in wave-driven oscillatory flow
Authors:
Mark A. Levenstein,
Daniel J. Gysbers,
Kristen L. Marhaver,
Sameh Kattom,
Lucas Tichy,
Zachary Quinlan,
Haley M. Tholen,
Linda Wegley Kelly,
Mark J. A. Vermeij,
Amy J. Wagoner Johnson,
Gabriel Juarez
Abstract:
Larval settlement in wave-dominated, nearshore environments is the most critical life stage for a vast array of marine invertebrates, yet it is poorly understood and virtually impossible to observe in situ. Using a custom-built flume tank that mimics the oscillatory fluid flow over a shallow coral reef, we show that millimeter-scale benthic topography increases the settlement of slow-swimming cora…
▽ More
Larval settlement in wave-dominated, nearshore environments is the most critical life stage for a vast array of marine invertebrates, yet it is poorly understood and virtually impossible to observe in situ. Using a custom-built flume tank that mimics the oscillatory fluid flow over a shallow coral reef, we show that millimeter-scale benthic topography increases the settlement of slow-swimming coral larvae by an order of magnitude relative to flat substrates. Particle tracking velocimetry of flow fields revealed that millimeter-scale ridges introduced regions of flow recirculation that redirected larvae toward the substrate surface and decreased the local fluid speed, effectively increasing the window of time for larvae to settle. In agreement with experiments, computational fluid dynamics modeling and agent-based larval simulations also showed significantly higher settlement on ridged substrates. These findings highlight how physics-based substrate design can create new opportunities to increase larval recruitment for ecosystem restoration.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Effect of dispersants on bacterial colonization of oil droplets: a microfluidic approach
Authors:
Vincent Hickl,
Gabriel Juarez
Abstract:
Bacteria biodegradation of immiscible oil requires cell-droplet encounters, surface attachment, and hydrocarbon metabolism. Chemical dispersants are applied to oil spills to reduce the mean dispersed droplet size, thereby increasing the available surface area for attachment, in attempts to facilitate bacterial biodegradation. However, their effectiveness remains contentious as studies have shown t…
▽ More
Bacteria biodegradation of immiscible oil requires cell-droplet encounters, surface attachment, and hydrocarbon metabolism. Chemical dispersants are applied to oil spills to reduce the mean dispersed droplet size, thereby increasing the available surface area for attachment, in attempts to facilitate bacterial biodegradation. However, their effectiveness remains contentious as studies have shown that dispersants can inhibit, enhance, or have no effect on biodegradation. Therefore, questions remain on whether dispersants affect surface attachment or cell viability. Here, using microfluidics and time-lapse microscopy, we directly observe the attachment and growth of the marine bacterium, \emph{Alcanivorax borkumensis}, on stationary crude oil droplets ($5$ \textmu m $< R < 150$ \textmu m) in the presence of Corexit 9500. We show that the average colonization time, or the time comprised of encounters, attachment, and growth, is dependent on droplet size and primarily driven by diffusive encounters. Our results suggest that dispersants do not inhibit or enhance these biophysical processes.
△ Less
Submitted 31 January, 2022;
originally announced February 2022.
-
Multi-curvature viscous streaming: flow topology and particle manipulation
Authors:
Yashraj Bhosale,
Giridar Vishwanathan,
Tejaswin Parthasarathy,
Gabriel Juarez,
Mattia Gazzola
Abstract:
Viscous streaming refers to the rectified, steady flows that emerge when a liquid oscillates around an immersed microfeature, typically a solid body or a bubble. The ability of such features to locally concentrate stresses produces strong inertial effects to which both fluid and immersed particles respond within short length (O(100) microns) and time (milliseconds) scales, rendering viscous stream…
▽ More
Viscous streaming refers to the rectified, steady flows that emerge when a liquid oscillates around an immersed microfeature, typically a solid body or a bubble. The ability of such features to locally concentrate stresses produces strong inertial effects to which both fluid and immersed particles respond within short length (O(100) microns) and time (milliseconds) scales, rendering viscous streaming arguably the most efficient mechanism to exploit inertia at the microscale. Despite this potential, viscous streaming has been investigated in rather narrow conditions, mostly making use of bodies of uniform curvature (cylinders, spheres) for which induced flow topologies are constrained to only two regimes, classically referred to as single and double layer regimes. This severely limits the scope of potential applications, and sits in stark contrast to inertial focusing (the approach that perhaps has most defined the field of inertial microfluidics), where instead boundaries with multiple curvatures have long been utilised to magnify inertial effects, expand design space, and enable novel applications. Here, we demonstrate that a multi-curvature approach in viscous streaming dramatically extends the range of accessible flow topologies. We show that numerically predicted, but never experimentally observed, streaming flows can be physically reproduced, computationally engineered, and in turn used to enhance particle manipulation, filtering and separation in compact, robust, tunable and inexpensive devices. Overall, this study provides an avenue to unlock the utility of viscous streaming with potential applications in manufacturing, environment, health and medicine, from particle self-assembly to microplastics removal.
△ Less
Submitted 13 November, 2021;
originally announced November 2021.
-
Generation and application of sub-kilohertz oscillatory flows in microchannels
Authors:
Giridar Vishwanathan,
Gabriel Juarez
Abstract:
We present a user-friendly and versatile experimental technique that generates sub-kilohertz sinusoidal oscillatory flows within microchannels. The method involves the direct interfacing of microfluidic tubing with a loudspeaker diaphragm to generate oscillatory flow in microchannels with frequencies ranging from $10-1000$ Hz and amplitudes ranging from $10 - 600 \ μ$m. The speaker-based apparatus…
▽ More
We present a user-friendly and versatile experimental technique that generates sub-kilohertz sinusoidal oscillatory flows within microchannels. The method involves the direct interfacing of microfluidic tubing with a loudspeaker diaphragm to generate oscillatory flow in microchannels with frequencies ranging from $10-1000$ Hz and amplitudes ranging from $10 - 600 \ μ$m. The speaker-based apparatus allows independent control of frequency and amplitude that is unique to the speaker's manufacturing specifications. The performance of our technique is evaluated by Fourier spectral analysis of oscillatory motion of tracer particles, obtained by particle tracking velocimetry, as well as by comparing oscillatory flow profiles against theoretical benchmarks such as Stokes flow in a square channel and Stokes' second problem near a solid boundary. Applications that utilize both the oscillatory flow and the associated steady rectified flows are demonstrated in prototypical microfluidic configurations. These include inertial focusing and mixing at low Reynolds numbers, respectively.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
A joint 3D UNet-Graph Neural Network-based method for Airway Segmentation from chest CTs
Authors:
Antonio Garcia-Uceda Juarez,
Raghavendra Selvan,
Zaigham Saghir,
Marleen de Bruijne
Abstract:
We present an end-to-end deep learning segmentation method by combining a 3D UNet architecture with a graph neural network (GNN) model. In this approach, the convolutional layers at the deepest level of the UNet are replaced by a GNN-based module with a series of graph convolutions. The dense feature maps at this level are transformed into a graph input to the GNN module. The incorporation of grap…
▽ More
We present an end-to-end deep learning segmentation method by combining a 3D UNet architecture with a graph neural network (GNN) model. In this approach, the convolutional layers at the deepest level of the UNet are replaced by a GNN-based module with a series of graph convolutions. The dense feature maps at this level are transformed into a graph input to the GNN module. The incorporation of graph convolutions in the UNet provides nodes in the graph with information that is based on node connectivity, in addition to the local features learnt through the downsampled paths. This information can help improve segmentation decisions. By stacking several graph convolution layers, the nodes can access higher order neighbourhood information without substantial increase in computational expense. We propose two types of node connectivity in the graph adjacency: i) one predefined and based on a regular node neighbourhood, and ii) one dynamically computed during training and using the nearest neighbour nodes in the feature space. We have applied this method to the task of segmenting the airway tree from chest CT scans. Experiments have been performed on 32 CTs from the Danish Lung Cancer Screening Trial dataset. We evaluate the performance of the UNet-GNN models with two types of graph adjacency and compare it with the baseline UNet.
△ Less
Submitted 22 August, 2019;
originally announced August 2019.
-
Modeling the impact of dilution on the microbial degradation time of dispersed oil in marine environments
Authors:
Vicente I. Fernandez,
Roman Stocker,
Gabriel Juarez
Abstract:
Dispersants aid the breakup of crude oil masses and increase the available interfacial surface area for bacteria to degrade insoluble hydrocarbons in the marine environment. However, this common view neglects key aspects of the microscale interactions between bacteria and oil droplets, particularly the encounters between these elements that are required for degradation to occur. This chapter discu…
▽ More
Dispersants aid the breakup of crude oil masses and increase the available interfacial surface area for bacteria to degrade insoluble hydrocarbons in the marine environment. However, this common view neglects key aspects of the microscale interactions between bacteria and oil droplets, particularly the encounters between these elements that are required for degradation to occur. This chapter discusses a biophysical model for hydrocarbon consumption of suspended oil droplets under conditions of rapid dilution that occur in natural environments. Based on the model, which includes typical biological growth parameters, dilution is found to produce an effective delay in the onset of biodegradation by approximately a week. The steady and rapid reduction in oil concertation, due to dilution, is found to outpace the production of oil-degrading bacteria that result from colonization of degrading oil droplets, maintaining the process in an encounter-limited state. This mechanistic model provides a baseline for better understanding of microscale biodegradation in dilute oil environments and can help inform the design of mitigation strategies in marine systems.
△ Less
Submitted 21 August, 2019;
originally announced August 2019.
-
Multi-Task Attention-Based Semi-Supervised Learning for Medical Image Segmentation
Authors:
Shuai Chen,
Gerda Bortsova,
Antonio Garcia-Uceda Juarez,
Gijs van Tulder,
Marleen de Bruijne
Abstract:
We propose a novel semi-supervised image segmentation method that simultaneously optimizes a supervised segmentation and an unsupervised reconstruction objectives. The reconstruction objective uses an attention mechanism that separates the reconstruction of image areas corresponding to different classes. The proposed approach was evaluated on two applications: brain tumor and white matter hyperint…
▽ More
We propose a novel semi-supervised image segmentation method that simultaneously optimizes a supervised segmentation and an unsupervised reconstruction objectives. The reconstruction objective uses an attention mechanism that separates the reconstruction of image areas corresponding to different classes. The proposed approach was evaluated on two applications: brain tumor and white matter hyperintensities segmentation. Our method, trained on unlabeled and a small number of labeled images, outperformed supervised CNNs trained with the same number of images and CNNs pre-trained on unlabeled data. In ablation experiments, we observed that the proposed attention mechanism substantially improves segmentation performance. We explore two multi-task training strategies: joint training and alternating training. Alternating training requires fewer hyperparameters and achieves a better, more stable performance than joint training. Finally, we analyze the features learned by different methods and find that the attention mechanism helps to learn more discriminative features in the deeper layers of encoders.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Steady streaming flows in viscoelastic liquids
Authors:
Giridar Vishwanathan,
Gabriel Juarez
Abstract:
We discuss experimental investigations on steady streaming flows of dilute and semi-dilute polymer solutions in microfluidic devices. The effect of non-Newtonian behavior on steady streaming for different model fluids is determined by characterizing the evolution of the inner streaming layer as a function of oscillation frequency using particle tracking velocimetry. We find that steady streaming v…
▽ More
We discuss experimental investigations on steady streaming flows of dilute and semi-dilute polymer solutions in microfluidic devices. The effect of non-Newtonian behavior on steady streaming for different model fluids is determined by characterizing the evolution of the inner streaming layer as a function of oscillation frequency using particle tracking velocimetry. We find that steady streaming velocity profiles in constant-viscosity elastic liquids are qualitatively similar to those in Newtonian liquids. Steady streaming velocity profiles in elastic liquids with strong shear thinning, however, display two unique features: (i) a non-monotonic evolution of the inner streaming layer with increasing frequency, first growing then decreasing in width, and (ii) a clear asymmetry in the flow profile at high frequencies.
△ Less
Submitted 5 July, 2019; v1 submitted 6 March, 2019;
originally announced March 2019.
-
Steady streaming viscometry of Newtonian liquids in microfluidic devices
Authors:
Giridar Vishwanathan,
Gabriel Juarez
Abstract:
We report a novel technique capable of measuring the kinematic shear viscosity of Newtonian liquids with steady streaming in microfluidic devices. This probe-free microrheological method utilizes sub-kilohertz liquid oscillation frequencies around a cylindrical obstacle, ensuring that the inner streaming layer is comparable in size to the cylinder radius. To calibrate the viscometer, the evolution…
▽ More
We report a novel technique capable of measuring the kinematic shear viscosity of Newtonian liquids with steady streaming in microfluidic devices. This probe-free microrheological method utilizes sub-kilohertz liquid oscillation frequencies around a cylindrical obstacle, ensuring that the inner streaming layer is comparable in size to the cylinder radius. To calibrate the viscometer, the evolution of the inner streaming layer as a function of oscillation frequency for a liquid of known viscosity is characterized using standard particle tracking techniques. Once calibrated, we show how the steady streaming viscometer can be used to measure low-viscosity liquids and volatile liquids.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
Graph Refinement based Airway Extraction using Mean-Field Networks and Graph Neural Networks
Authors:
Raghavendra Selvan,
Thomas Kipf,
Max Welling,
Antonio Garcia-Uceda Juarez,
Jesper H Pedersen,
Jens Petersen,
Marleen de Bruijne
Abstract:
Graph refinement, or the task of obtaining subgraphs of interest from over-complete graphs, can have many varied applications. In this work, we extract trees or collection of sub-trees from image data by, first deriving a graph-based representation of the volumetric data and then, posing the tree extraction as a graph refinement task. We present two methods to perform graph refinement. First, we u…
▽ More
Graph refinement, or the task of obtaining subgraphs of interest from over-complete graphs, can have many varied applications. In this work, we extract trees or collection of sub-trees from image data by, first deriving a graph-based representation of the volumetric data and then, posing the tree extraction as a graph refinement task. We present two methods to perform graph refinement. First, we use mean-field approximation (MFA) to approximate the posterior density over the subgraphs from which the optimal subgraph of interest can be estimated. Mean field networks (MFNs) are used for inference based on the interpretation that iterations of MFA can be seen as feed-forward operations in a neural network. This allows us to learn the model parameters using gradient descent. Second, we present a supervised learning approach using graph neural networks (GNNs) which can be seen as generalisations of MFNs. Subgraphs are obtained by training a GNN-based graph refinement model to directly predict edge probabilities. We discuss connections between the two classes of methods and compare them for the task of extracting airways from 3D, low-dose, chest CT data. We show that both the MFN and GNN models show significant improvement when compared to one baseline method, that is similar to a top performing method in the EXACT'09 Challenge, and a 3D U-Net based airway segmentation model, in detecting more branches with fewer false positives.
△ Less
Submitted 2 June, 2020; v1 submitted 21 November, 2018;
originally announced November 2018.
-
Automatic Airway Segmentation in chest CT using Convolutional Neural Networks
Authors:
A. Garcia-Uceda Juarez,
H. A. W. M. Tiddens,
M. de Bruijne
Abstract:
Segmentation of the airway tree from chest computed tomography (CT) images is critical for quantitative assessment of airway diseases including bronchiectasis and chronic obstructive pulmonary disease (COPD). However, obtaining an accurate segmentation of airways from CT scans is difficult due to the high complexity of airway structures. Recently, deep convolutional neural networks (CNNs) have bec…
▽ More
Segmentation of the airway tree from chest computed tomography (CT) images is critical for quantitative assessment of airway diseases including bronchiectasis and chronic obstructive pulmonary disease (COPD). However, obtaining an accurate segmentation of airways from CT scans is difficult due to the high complexity of airway structures. Recently, deep convolutional neural networks (CNNs) have become the state-of-the-art for many segmentation tasks, and in particular the so-called Unet architecture for biomedical images. However, its application to the segmentation of airways still remains a challenging task. This work presents a simple but robust approach based on a 3D Unet to perform segmentation of airways from chest CTs. The method is trained on a dataset composed of 12 CTs, and tested on another 6 CTs. We evaluate the influence of different loss functions and data augmentation techniques, and reach an average dice coefficient of 0.8 between the ground-truth and our automated segmentations.
△ Less
Submitted 14 August, 2018;
originally announced August 2018.
-
Splash control of drop impacts with geometric targets
Authors:
Gabriel Juarez,
Thomai Gastopoulos,
Yibin Zhang,
Michael L. Siegel,
Paulo E. Arratia
Abstract:
Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim breaks up into an irregular arrangement of filaments and secondary droplets. We show experimentally that the lamella expansion and subsequent break up of the ou…
▽ More
Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim breaks up into an irregular arrangement of filaments and secondary droplets. We show experimentally that the lamella expansion and subsequent break up of the outer rim can be controlled by length scales that are of comparable dimension to the impacting drop diameter. Under identical impact parameters, ie. fluid properties and impact velocity, we observe unique splashing dynamics by varying the target cross-sectional geometry. These behaviors include: (i) geometrically-shaped lamellae and (ii) a transition in splashing stability, from regular to irregular splashing. We propose that regular splashes are controlled by the azimuthal perturbations imposed by the target cross-sectional geometry and that irregular splashes are governed by the fastest-growing unstable Plateau-Rayleigh mode.
△ Less
Submitted 19 February, 2012; v1 submitted 15 November, 2011;
originally announced November 2011.
-
C. elegans in Complex Media
Authors:
X. N. Shen,
G. Juarez,
P. E. Arratia
Abstract:
We experimentally studied the locomotion of the nematode C. elegans in both fluidic and granular media. In this fluid dynamics video, we show the motility gaits of the nematode in these two environments. The motility of the nematode C. elegans is investigated using particle tracking methods. Experimental results show that different transport patterns emerge from the fluidic and granular media duri…
▽ More
We experimentally studied the locomotion of the nematode C. elegans in both fluidic and granular media. In this fluid dynamics video, we show the motility gaits of the nematode in these two environments. The motility of the nematode C. elegans is investigated using particle tracking methods. Experimental results show that different transport patterns emerge from the fluidic and granular media during the nematode locomotion.
△ Less
Submitted 13 October, 2011;
originally announced October 2011.
-
Splash control using geometric targets
Authors:
G. Juarez,
Y. Zhang,
T. Gastopoulos,
P. E. Arratia
Abstract:
Experiments of water droplets impacting small geometric posts of equal dimension to the drop diameter are shown in this fluid dynamics video. High speed photography shows that the dynamics of drop splashing are significantly affected by the geometrical boundary of the target and that finger formation and drop break up are accurately controlled.
Experiments of water droplets impacting small geometric posts of equal dimension to the drop diameter are shown in this fluid dynamics video. High speed photography shows that the dynamics of drop splashing are significantly affected by the geometrical boundary of the target and that finger formation and drop break up are accurately controlled.
△ Less
Submitted 14 October, 2010;
originally announced October 2010.
-
Motility of small nematodes in disordered wet granular media
Authors:
G. Juarez,
K. Lu,
J. Sznitman,
P. E. Arratia
Abstract:
The motility of the worm nematode \textit{Caenorhabditis elegans} is investigated in shallow, wet granular media as a function of particle size dispersity and area density ($φ$). Surprisingly, we find that the nematode's propulsion speed is enhanced by the presence of particles in a fluid and is nearly independent of area density. The undulation speed, often used to differentiate locomotion gaits,…
▽ More
The motility of the worm nematode \textit{Caenorhabditis elegans} is investigated in shallow, wet granular media as a function of particle size dispersity and area density ($φ$). Surprisingly, we find that the nematode's propulsion speed is enhanced by the presence of particles in a fluid and is nearly independent of area density. The undulation speed, often used to differentiate locomotion gaits, is significantly affected by the bulk material properties of wet mono- and polydisperse granular media for $φ\geq 0.55$. This difference is characterized by a change in the nematode's waveform from swimming to crawling in dense polydisperse media \textit{only}. This change highlights the organism's adaptability to subtle differences in local structure and response between monodisperse and polydisperse media.
△ Less
Submitted 10 September, 2010; v1 submitted 4 June, 2010;
originally announced June 2010.