-
Astronomical Spectroscopy with Skipper CCDs: First Results from a Skipper CCD Focal Plane Prototype at SIFS
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Brandon Roach,
Marco Bonati,
Abhishek Bakshi,
Julia Campa,
Gustavo Cancelo,
Braulio Cancino,
Claudio R. Chavez,
Fernando Chierchie,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen E. Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Eduardo Paolini,
Andrés A. Plazas Malagón,
Leandro Stefanazzi,
Javier Tiffenberg,
Ken Treptou,
Sho Uemura,
Neal Wilcer
Abstract:
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astro…
▽ More
We present the first on-sky results from an ultra-low-readout-noise Skipper CCD focal plane prototype for the SOAR Integral Field Spectrograph (SIFS). The Skipper CCD focal plane consists of four 6k x 1k, 15 $μ$m pixel, fully-depleted, p-channel devices that have been thinned to ~250 $μ$m, backside processed, and treated with an anti-reflective coating. These Skipper CCDs were configured for astronomical spectroscopy, i.e., single-sample readout noise < 4.3 e- rms/pixel, the ability to achieve multi-sample readout noise $\ll$ 1 e- rms/pixel, full-well capacities ~40,000-65,000 e-, low dark current and charge transfer inefficiency (~2 x 10$^{-4}$ e-/pixel/s and 3.44 x 10$^{-7}$, respectively), and an absolute quantum efficiency of $\gtrsim$ 80% between 450 nm and 980 nm ($\gtrsim$ 90% between 600 nm and 900 nm). We optimized the readout sequence timing to achieve sub-electron noise (~0.5 e- rms/pixel) in a region of 2k x 4k pixels and photon-counting noise (~0.22 e- rms/pixel) in a region of 220 x 4k pixels, each with a readout time of $\lesssim$ 17 min. We observed two quasars (HB89 1159+123 and QSO J1621-0042) at redshift z ~ 3.5, two high-redshift galaxy clusters (CL J1001+0220 and SPT-CL J2040-4451), an emission line galaxy at z = 0.3239, a candidate member star of the Boötes II ultra-faint dwarf galaxy, and five CALSPEC spectrophotometric standard stars (HD074000, HD60753, HD106252, HD101452, HD200654). We present charge-quantized, photon-counting observations of the quasar HB89 1159+123 and show the detector sensitivity increase for faint spectral features. We demonstrate signal-to-noise performance improvements for SIFS observations in the low-background, readout-noise-dominated regime. We outline scientific studies that will leverage the SIFS-Skipper CCD data and new detector architectures that utilize the Skipper floating gate amplifier with faster readout times.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Generalized Einstein Relations between Absorption and Emission Spectra at Thermodynamic Equilibrium
Authors:
Jisu Ryu,
Sarang Yeola,
David M. Jonas
Abstract:
We present Einstein coefficient spectra and a detailed-balance derivation of generalized Einstein relations between them that is based on the connection between spontaneous and stimulated emission. If two broadened levels or bands overlap in energy, transitions between them need not be purely absorptive or emissive. Consequently, spontaneous emission can occur in both transition directions, and fo…
▽ More
We present Einstein coefficient spectra and a detailed-balance derivation of generalized Einstein relations between them that is based on the connection between spontaneous and stimulated emission. If two broadened levels or bands overlap in energy, transitions between them need not be purely absorptive or emissive. Consequently, spontaneous emission can occur in both transition directions, and four Einstein coefficient spectra replace the three Einstein coefficients for a line. At equilibrium, the four different spectra obey five pairwise relationships and one lineshape generates all four. These relationships are independent of molecular quantum statistics and predict the Stokes' shift between forward and reverse transitions required by equilibrium with blackbody radiation. For Boltzmann statistics, the relative strengths of forward and reverse transitions depend on the formal chemical potential difference between the initial and final bands, which becomes the standard chemical potential difference for ideal solutes. The formal chemical potential of a band replaces both the energy and degeneracy of a quantum level. Like the energies of quantum levels, the formal chemical potentials of bands obey the Rydberg-Ritz combination principle. Each stimulated Einstein coefficient spectrum gives a frequency-dependent transition cross section. Transition cross sections obey causality and a detailed-balance condition with spontaneous emission, but do not directly obey generalized Einstein relations. Even with an energetic width much less than the photon energy, an absorptive forward transition with an energetic width much greater than the thermal energy can have such an extreme Stokes' shift that its reverse transition cross section becomes predominantly absorptive rather than emissive.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
BitVMX: A CPU for Universal Computation on Bitcoin
Authors:
Sergio Demian Lerner,
Ramon Amela,
Shreemoy Mishra,
Martin Jonas,
Javier Álvarez Cid-Fuentes
Abstract:
BitVMX is a new design for a virtual CPU to optimistically execute arbitrary programs on Bitcoin based on a challenge response game introduced in BitVM. Similar to BitVM1 we create a general-purpose CPU to be verified in Bitcoin script. Our design supports common architectures, such as RISC-V or MIPS. Our main contribution to the state of the art is a design that uses hash chains of program traces…
▽ More
BitVMX is a new design for a virtual CPU to optimistically execute arbitrary programs on Bitcoin based on a challenge response game introduced in BitVM. Similar to BitVM1 we create a general-purpose CPU to be verified in Bitcoin script. Our design supports common architectures, such as RISC-V or MIPS. Our main contribution to the state of the art is a design that uses hash chains of program traces, memory mapped registers, and a new challenge-response protocol. We present a new message linking protocol as a means to allow authenticated communication between the participants. This protocol emulates stateful smart contracts by sharing state between transactions. This provides a basis for our verification game which uses a graph of pre-signed transactions to support challenge-response interactions. In case of a dispute, the hash chain of program trace is used with selective pre-signed transactions to locate (via $n$-ary search) and then recover the precise nature of errors in the computation. Unlike BitVM1, our approach does not require the creation of Merkle trees for CPU instructions or memory words. Additionally, it does not rely on signature equivocations. These differences help avoid complexities associated with BitVM1 and make BitVMX a compelling alternative to BitVM2. Our approach is quite flexible, BitVMX can be instantiated to balance transaction cost vs round complexity, prover cost vs verifier cost, and precomputations vs round complexity.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Gray-Box Fuzzing via Gradient Descent and Boolean Expression Coverage (Technical Report)
Authors:
Martin Jonáš,
Jan Strejček,
Marek Trtík,
Lukáš Urban
Abstract:
We present a novel gray-box fuzzing algorithm monitoring executions of instructions converting numerical values to Boolean ones. An important class of such instructions evaluate predicates, e.g., *cmp in LLVM. That alone allows us to infer the input dependency (c.f. the taint analysis) during the fuzzing on-the-fly with reasonable accuracy, which in turn enables an effective use of the gradient de…
▽ More
We present a novel gray-box fuzzing algorithm monitoring executions of instructions converting numerical values to Boolean ones. An important class of such instructions evaluate predicates, e.g., *cmp in LLVM. That alone allows us to infer the input dependency (c.f. the taint analysis) during the fuzzing on-the-fly with reasonable accuracy, which in turn enables an effective use of the gradient descent on these instructions (to invert the result of their evaluation). Although the fuzzing attempts to maximize the coverage of the instructions, there is an interesting correlation with the standard branch coverage, which we are able to achieve indirectly. The evaluation on Test-Comp 2023 benchmarks shows that our approach, despite being a pure gray-box fuzzing, is able to compete with the leading tools in the competition, which combine fuzzing with other powerful techniques like model checking, symbolic execution, or abstract interpretation.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Characterization and Optimization of Skipper CCDs for the SOAR Integral Field Spectrograph
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Andrés A. Plazas Malagón,
Abhishek Bakshi,
Marco Bonati,
Julia Campa,
Braulio Cancino,
Claudio R. Chavez,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Manuel E. Gaido,
Stephen Holland,
Rachel Hur,
Michelle Jonas,
Peter Moore,
Javier Tiffenberg
Abstract:
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside pro…
▽ More
We present results from the characterization and optimization of six Skipper CCDs for use in a prototype focal plane for the SOAR Integral Field Spectrograph (SIFS). We tested eight Skipper CCDs and selected six for SIFS based on performance results. The Skipper CCDs are 6k $\times$ 1k, 15 $μ$m pixels, thick, fully-depleted, $p$-channel devices that have been thinned to $\sim 250 μ$m, backside processed, and treated with an antireflective coating. We optimize readout time to achieve $<4.3$ e$^-$ rms/pixel in a single non-destructive readout and $0.5$ e$^-$ rms/pixel in $5 \%$ of the detector. We demonstrate single-photon counting with $N_{\rm samp}$ = 400 ($σ_{\rm 0e^-} \sim$ 0.18 e$^-$ rms/pixel) for all 24 amplifiers (four amplifiers per detector). We also perform conventional CCD characterization measurements such as cosmetic defects ($ <0.45 \%$ ``bad" pixels), dark current ($\sim 2 \times 10^{-4}$ e$^-$/pixel/sec.), charge transfer inefficiency ($3.44 \times 10^{-7}$ on average), and charge diffusion (PSF $< 7.5 μ$m). We report on characterization and optimization measurements that are only enabled by photon-counting. Such results include voltage optimization to achieve full-well capacities $\sim 40,000-63,000$ e$^-$ while maintaining photon-counting capabilities, clock induced charge optimization, non-linearity measurements at low signals (few tens of electrons). Furthermore, we perform measurements of the brighter-fatter effect and absolute quantum efficiency ($\gtrsim\, 80 \%$ between 450 nm and 980 nm; $\gtrsim\,90 \%$ between 600 nm and 900 nm) using Skipper CCDs.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data
Authors:
Z. Pan,
F. Bianchini,
W. L. K. Wu,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
B. Ansarinejad,
M. Archipley,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
E. Camphuis,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang
, et al. (111 additional authors not shown)
Abstract:
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of th…
▽ More
We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of the lensing measurements, and report a minimum-variance combined lensing power spectrum over angular multipoles of $50<L<2000$, which we use to constrain cosmological models. When analyzed alone and jointly with primary cosmic microwave background (CMB) spectra within the $Λ$CDM model, our lensing amplitude measurements are consistent with measurements from SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon density and other parameters including uncertainties on a foreground bias template, we obtain a $1σ$ constraint on $σ_8 Ω_{\rm m}^{0.25}=0.595 \pm 0.026$ using the SPT-3G 2018 lensing data alone, where $σ_8$ is a common measure of the amplitude of structure today and $Ω_{\rm m}$ is the matter density parameter. Combining SPT-3G 2018 lensing measurements with baryon acoustic oscillation (BAO) data, we derive parameter constraints of $σ_8 = 0.810 \pm 0.033$, $S_8 \equiv σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.836 \pm 0.039$, and Hubble constant $H_0 =68.8^{+1.3}_{-1.6}$ km s$^{-1}$ Mpc$^{-1}$. Using CMB anisotropy and lensing measurements from SPT-3G only, we provide independent constraints on the spatial curvature of $Ω_{K} = 0.014^{+0.023}_{-0.026}$ (95% C.L.) and the dark energy density of $Ω_Λ= 0.722^{+0.031}_{-0.026}$ (68% C.L.). When combining SPT-3G lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on the sum of the neutrino masses of $\sum m_ν< 0.30$ eV (95% C.L.).
△ Less
Submitted 29 January, 2024; v1 submitted 22 August, 2023;
originally announced August 2023.
-
Design of a Skipper CCD Focal Plane for the SOAR Integral Field Spectrograph
Authors:
Edgar Marrufo Villalpando,
Alex Drlica-Wagner,
Marco Bonati,
Abhishek Bakshi,
Vanessa Bawden de Paula Macanhan,
Braulio Cancino,
Gregory E. Derylo,
Juan Estrada,
Guillermo Fernandez Moroni,
Luciano Fraga,
Stephen Holland,
Michelle J. Jonas,
Agustín Lapi,
Peter Moore,
Andrés A. Plazas Malagón,
Leandro Stefanazzi,
Javier Tiffenberg
Abstract:
We present the development of a Skipper Charge-Coupled Device (CCD) focal plane prototype for the SOAR Telescope Integral Field Spectrograph (SIFS). This mosaic focal plane consists of four 6k $\times$ 1k, 15 $μ$m pixel Skipper CCDs mounted inside a vacuum dewar. We describe the process of packaging the CCDs so that they can be easily tested, transported, and installed in a mosaic focal plane. We…
▽ More
We present the development of a Skipper Charge-Coupled Device (CCD) focal plane prototype for the SOAR Telescope Integral Field Spectrograph (SIFS). This mosaic focal plane consists of four 6k $\times$ 1k, 15 $μ$m pixel Skipper CCDs mounted inside a vacuum dewar. We describe the process of packaging the CCDs so that they can be easily tested, transported, and installed in a mosaic focal plane. We characterize the performance of $\sim 650 μ$m thick, fully-depleted engineering-grade Skipper CCDs in preparation for performing similar characterization tests on science-grade Skipper CCDs which will be thinned to 250$μ$m and backside processed with an antireflective coating. We achieve a single-sample readout noise of $4.5 e^{-} rms/pix$ for the best performing amplifiers and sub-electron resolution (photon counting capabilities) with readout noise $σ\sim 0.16 e^{-} rms/pix$ from 800 measurements of the charge in each pixel. We describe the design and construction of the Skipper CCD focal plane and provide details about the synchronized readout electronics system that will be implemented to simultaneously read 16 amplifiers from the four Skipper CCDs (4-amplifiers per detector). Finally, we outline future plans for laboratory testing, installation, commissioning, and science verification of our Skipper CCD focal plane.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment
Authors:
D. R. Barron,
Z. Ahmed,
J. Aguilar,
A. J. Anderson,
C. F. Baker,
P. S. Barry,
J. A. Beall,
A. N. Bender,
B. A. Benson,
R. W. Besuner,
T. W. Cecil,
C. L. Chang,
S. C. Chapman,
G. E. Chesmore,
G. Derylo,
W. B. Doriese,
S. M. Duff,
T. Elleflot,
J. P. Filippini,
B. Flaugher,
J. G. Gomez,
P. K. Grimes,
R. Gualtieri,
I. Gullett,
G. Haller
, et al. (25 additional authors not shown)
Abstract:
We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental…
▽ More
We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Asteroid Measurements at Millimeter Wavelengths with the South Pole Telescope
Authors:
P. M. Chichura,
A. Foster,
C. Patel,
N. Ossa-Jaen,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
M. Archipley,
J. E. Austermann,
J. S. Avva,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
J. A. Beall,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil
, et al. (119 additional authors not shown)
Abstract:
We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing st…
▽ More
We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing static sky signal, and then average the mean-subtracted maps at known asteroid locations. We detect three asteroids$\text{ -- }$(324) Bamberga, (13) Egeria, and (22) Kalliope$\text{ -- }$with signal-to-noise ratios (S/N) of 11.2, 10.4, and 6.1, respectively, at 2.0 mm (150 GHz); we also detect (324) Bamberga with S/N of 4.1 at 3.2 mm (95 GHz). We place constraints on these asteroids' effective emissivities, brightness temperatures, and light curve modulation amplitude. Our flux density measurements of (324) Bamberga and (13) Egeria roughly agree with predictions, while our measurements of (22) Kalliope suggest lower flux, corresponding to effective emissivities of $0.66 \pm 0.11$ at 2.0 mm and $<0.47$ at 3.2mm. We predict the asteroids detectable in other SPT datasets and find good agreement with detections of (772) Tanete and (1093) Freda in recent data from the SPT-3G camera, which has $\sim10 \times$ the map** speed of SPTpol. This work is the first focused analysis of asteroids in data from CMB surveys, and it demonstrates we can repurpose historic and future datasets for asteroid studies. Future SPT measurements can help constrain the distribution of surface properties over a larger asteroid population.
△ Less
Submitted 21 April, 2023; v1 submitted 2 February, 2022;
originally announced February 2022.
-
The Design and Integrated Performance of SPT-3G
Authors:
J. A. Sobrin,
A. J. Anderson,
A. N. Bender,
B. A. Benson,
D. Dutcher,
A. Foster,
N. Goeckner-Wald,
J. Montgomery,
A. Nadolski,
A. Rahlin,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
M. Archipley,
J. E. Austermann,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant
, et al. (98 additional authors not shown)
Abstract:
SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, mill…
▽ More
SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, millimeter-wave bright galaxies, and a variety of transient phenomena. The SPT-3G instrument provides a significant improvement in map** speed over its predecessors, SPT-SZ and SPTpol. The broadband optics design of the instrument achieves a 430 mm diameter image plane across observing bands of 95 GHz, 150 GHz, and 220 GHz, with 1.2 arcmin FWHM beam response at 150 GHz. In the receiver, this image plane is populated with 2690 dual-polarization, tri-chroic pixels (~16000 detectors) read out using a 68X digital frequency-domain multiplexing readout system. In 2018, SPT-3G began a multiyear survey of 1500 deg$^{2}$ of the southern sky. We summarize the unique optical, cryogenic, detector, and readout technologies employed in SPT-3G, and we report on the integrated performance of the instrument.
△ Less
Submitted 25 February, 2022; v1 submitted 21 June, 2021;
originally announced June 2021.
-
Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model
Authors:
J. Montgomery,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (96 additional authors not shown)
Abstract:
The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout op…
▽ More
The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system due to the higher frequencies used, and parasitic impedances associated with new cryogenic electronic architecture. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems, and identify two previously uncharacterized contributions to readout noise, which become dominant at high bias frequency. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G. These results also suggest specific changes to warm electronics component values, wire-harness properties, and SQUID parameters, to improve the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope.
△ Less
Submitted 21 February, 2022; v1 submitted 29 March, 2021;
originally announced March 2021.
-
Constraints on $Λ$CDM Extensions from the SPT-3G 2018 $EE$ and $TE$ Power Spectra
Authors:
L. Balkenhol,
D. Dutcher,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (95 additional authors not shown)
Abstract:
We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino ma…
▽ More
We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino masses, the relativistic energy density and mass of a sterile neutrino, and the mean spatial curvature. We do not find clear evidence for any of these extensions, from either the SPT-3G 2018 dataset alone or in combination with baryon acoustic oscillation and \textit{Planck} data. None of these model extensions significantly relax the tension between Hubble-constant, $H_0$, constraints from the CMB and from distance-ladder measurements using Cepheids and supernovae. The addition of the SPT-3G 2018 data to \textit{Planck} reduces the square-root of the determinants of the parameter covariance matrices by factors of $1.3 - 2.0$ across these models, signaling a substantial reduction in the allowed parameter volume. We also explore CMB-based constraints on $H_0$ from combined SPT, \textit{Planck}, and ACT DR4 datasets. While individual experiments see some indications of different $H_0$ values between the $TT$, $TE$, and $EE$ spectra, the combined $H_0$ constraints are consistent between the three spectra. For the full combined datasets, we report $H_0 = 67.49 \pm 0.53\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$, which is the tightest constraint on $H_0$ from CMB power spectra to date and in $4.1\,σ$ tension with the most precise distance-ladder-based measurement of $H_0$. The SPT-3G survey is planned to continue through at least 2023, with existing maps of combined 2019 and 2020 data already having $\sim3.5\times$ lower noise than the maps used in this analysis.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Detection of Galactic and Extragalactic Millimeter-Wavelength Transient Sources with SPT-3G
Authors:
S. Guns,
A. Foster,
C. Daley,
A. Rahlin,
N. Whitehorn,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
L. Balkenhol,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter
, et al. (97 additional authors not shown)
Abstract:
High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G cam…
▽ More
High-angular-resolution cosmic microwave background experiments provide a unique opportunity to conduct a survey of time-variable sources at millimeter wavelengths, a population which has primarily been understood through follow-up measurements of detections in other bands. Here we report the first results of an astronomical transient survey with the South Pole Telescope (SPT) using the SPT-3G camera to observe 1500 square degrees of the southern sky. The observations took place from March to November 2020 in three bands centered at 95, 150, and 220 GHz. This survey yielded the detection of fifteen transient events from sources not previously detected by the SPT. The majority are associated with variable stars of different types, expanding the number of such detected flares by more than a factor of two. The stellar flares are unpolarized and bright, in some cases exceeding 1 Jy, and have durations from a few minutes to several hours. Another population of detected events last for 2--3 weeks and appear to be extragalactic in origin. Though data availability at other wavelengths is limited, we find evidence for concurrent optical activity for two of the stellar flares. Future data from SPT-3G and forthcoming instruments will provide real-time detection of millimeter-wave transients on timescales of minutes to months.
△ Less
Submitted 8 June, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
Measurements of the E-Mode Polarization and Temperature-E-Mode Correlation of the CMB from SPT-3G 2018 Data
Authors:
D. Dutcher,
L. Balkenhol,
P. A. R. Ade,
Z. Ahmed,
E. Anderes,
A. J. Anderson,
M. Archipley,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
K. Benabed,
A. N. Bender,
B. A. Benson,
F. Bianchini,
L. E. Bleem,
F. R. Bouchet,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
P. Chaubal,
G. Chen
, et al. (96 additional authors not shown)
Abstract:
We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values…
▽ More
We present measurements of the $E$-mode ($EE$) polarization power spectrum and temperature-$E$-mode ($TE$) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg$^2$ region at 95, 150, and 220 GHz taken over a four month period in 2018. We report binned values of the $EE$ and $TE$ power spectra over the angular multipole range $300 \le \ell < 3000$, using the multifrequency data to construct six semi-independent estimates of each power spectrum and their minimum-variance combination. These measurements improve upon the previous results of SPTpol across the multipole ranges $300 \le \ell \le 1400$ for $EE$ and $300 \le \ell \le 1700$ for $TE$, resulting in constraints on cosmological parameters comparable to those from other current leading ground-based experiments. We find that the SPT-3G dataset is well-fit by a $Λ$CDM cosmological model with parameter constraints consistent with those from Planck and SPTpol data. From SPT-3G data alone, we find $H_0 = 68.8 \pm 1.5 \mathrm{km\,s^{-1}\,Mpc^{-1}}$ and $σ_8 = 0.789 \pm 0.016$, with a gravitational lensing amplitude consistent with the $Λ$CDM prediction ($A_L = 0.98 \pm 0.12$). We combine the SPT-3G and the Planck datasets and obtain joint constraints on the $Λ$CDM model. The volume of the 68% confidence region in six-dimensional $Λ$CDM parameter space is reduced by a factor of 1.5 compared to Planck-only constraints, with only slight shifts in central values. We note that the results presented here are obtained from data collected during just half of a typical observing season with only part of the focal plane operable, and that the active detector count has since nearly doubled for observations made with SPT-3G after 2018.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
Certifying Joint Adversarial Robustness for Model Ensembles
Authors:
Mainuddin Ahmad Jonas,
David Evans
Abstract:
Deep Neural Networks (DNNs) are often vulnerable to adversarial examples.Several proposed defenses deploy an ensemble of models with the hope that, although the individual models may be vulnerable, an adversary will not be able to find an adversarial example that succeeds against the ensemble. Depending on how the ensemble is used, an attacker may need to find a single adversarial example that suc…
▽ More
Deep Neural Networks (DNNs) are often vulnerable to adversarial examples.Several proposed defenses deploy an ensemble of models with the hope that, although the individual models may be vulnerable, an adversary will not be able to find an adversarial example that succeeds against the ensemble. Depending on how the ensemble is used, an attacker may need to find a single adversarial example that succeeds against all, or a majority, of the models in the ensemble. The effectiveness of ensemble defenses against strong adversaries depends on the vulnerability spaces of models in the ensemble being disjoint. We consider the joint vulnerability of an ensemble of models, and propose a novel technique for certifying the joint robustness of ensembles, building upon prior works on single-model robustness certification. We evaluate the robustness of various models ensembles, including models trained using cost-sensitive robustness to be diverse, to improve understanding of the potential effectiveness of ensemble models as a defense against adversarial examples.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics
Authors:
A. Nadolski,
J. D. Vieira,
J. A. Sobrin,
A. M. Kofman,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. R. Cheshire IV,
G. E. Chesmore,
J. F. Cliche,
A. Cukierman,
T. de Haan,
M. Dierickx,
J. Ding,
D. Dutcher,
W. Everett
, et al. (64 additional authors not shown)
Abstract:
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com…
▽ More
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance.
△ Less
Submitted 2 March, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Particle Physics with the Cosmic Microwave Background with SPT-3G
Authors:
J. S. Avva,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
K. Aylor,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. E. Bleem,
S. Bocquet,
L. Bryant,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
T. M. Crawford,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
S. Dodelson,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (63 additional authors not shown)
Abstract:
The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, a…
▽ More
The cosmic microwave background (CMB) encodes information about the content and evolution of the universe. The presence of light, weakly interacting particles impacts the expansion history of the early universe, which alters the temperature and polarization anisotropies of the CMB. In this way, current measurements of the CMB place interesting constraints on the neutrino energy density and mass, as well as on the abundance of other possible light relativistic particle species. We present the status of an on-going 1500 sq. deg. survey with the SPT-3G receiver, a new mm-wavelength camera on the 10-m diameter South Pole Telescope (SPT). The SPT-3G camera consists of 16,000 superconducting transition edge sensors, a 10x increase over the previous generation camera, which allows it to map the CMB with an unprecedented combination of sensitivity and angular resolution. We highlight projected constraints on the abundance of sterile neutrinos and the sum of the neutrino masses for the SPT-3G survey, which could help determine the neutrino mass hierarchy.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G
Authors:
A. J. Anderson,
P. A. R. Ade,
Z. Ahmed,
J. S. Avva,
P. S. Barry,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the…
▽ More
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
On-sky performance of the SPT-3G frequency-domain multiplexed readout
Authors:
A. N. Bender,
A. J. Anderson,
J. S. Avva,
P. A. R. Ade,
Z. Ahmed,
P. S. Barry,
R. Basu Thakur,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current…
▽ More
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Design and Bolometer Characterization of the SPT-3G First-year Focal Plane
Authors:
W. Everett,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. E. Austermann,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
E. V. Denison,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
A. Foster,
R. N. Gannon,
A. Gilbert,
J. C. Groh,
N. W. Halverson
, et al. (51 additional authors not shown)
Abstract:
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization…
▽ More
During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Year two instrument status of the SPT-3G cosmic microwave background receiver
Authors:
A. N. Bender,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
K. Aylor,
P. S. Barry,
R. Basu Thakur,
B. A. Benson,
L. S. Bleem,
S. Bocquet,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
T. M. Crawford,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
S. Dodelson
, et al. (64 additional authors not shown)
Abstract:
The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a br…
▽ More
The South Pole Telescope (SPT) is a millimeter-wavelength telescope designed for high-precision measurements of the cosmic microwave background (CMB). The SPT measures both the temperature and polarization of the CMB with a large aperture, resulting in high resolution maps sensitive to signals across a wide range of angular scales on the sky. With these data, the SPT has the potential to make a broad range of cosmological measurements. These include constraining the effect of massive neutrinos on large-scale structure formation as well as cleaning galactic and cosmological foregrounds from CMB polarization data in future searches for inflationary gravitational waves. The SPT began observing in January 2017 with a new receiver (SPT-3G) containing $\sim$16,000 polarization-sensitive transition-edge sensor bolometers. Several key technology developments have enabled this large-format focal plane, including advances in detectors, readout electronics, and large millimeter-wavelength optics. We discuss the implementation of these technologies in the SPT-3G receiver as well as the challenges they presented. In late 2017 the implementations of all three of these technologies were modified to optimize total performance. Here, we present the current instrument status of the SPT-3G receiver.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Characterization and performance of the second-year SPT-3G focal plane
Authors:
D. Dutcher,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
W. Everett,
A. Foster,
J. Gallicchio,
A. Gilbert,
J. C. Groh,
S. T. Guns,
N. W. Halverson,
A. H. Harke-Hosemann
, et al. (46 additional authors not shown)
Abstract:
The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an…
▽ More
The third-generation instrument for the 10-meter South Pole Telescope, SPT-3G, was first installed in January 2017. In addition to completely new cryostats, secondary telescope optics, and readout electronics, the number of detectors in the focal plane has increased by an order of magnitude from previous instruments to ~16,000. The SPT-3G focal plane consists of ten detector modules, each with an array of 269 trichroic, polarization-sensitive pixels on a six-inch silicon wafer. Within each pixel is a broadband, dual-polarization sinuous antenna; the signal from each orthogonal linear polarization is divided into three frequency bands centered at 95, 150, and 220 GHz by in-line lumped element filters and transmitted via superconducting microstrip to Ti/Au transition-edge sensor (TES) bolometers. Properties of the TES film, microstrip filters, and bolometer island must be tightly controlled to achieve optimal performance. For the second year of SPT-3G operation, we have replaced all ten wafers in the focal plane with new detector arrays tuned to increase map** speed and improve overall performance. Here we discuss the TES superconducting transition temperature and normal resistance, detector saturation power, bandpasses, optical efficiency, and full array yield for the 2018 focal plane.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Design and characterization of the SPT-3G receiver
Authors:
J. A. Sobrin,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
A. Foster,
J. Gallichio,
A. Gilbert,
J. C. Groh,
S. T. Guns,
N. W. Halverson
, et al. (46 additional authors not shown)
Abstract:
The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle…
▽ More
The SPT-3G receiver was commissioned in early 2017 on the 10-meter South Pole Telescope (SPT) to map anisotropies in the cosmic microwave background (CMB). New optics, detector, and readout technologies have yielded a multichroic, high-resolution, low-noise camera with impressive throughput and sensitivity, offering the potential to improve our understanding of inflationary physics, astroparticle physics, and growth of structure. We highlight several key features and design principles of the new receiver, and summarize its performance to date.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Broadband anti-reflective coatings for cosmic microwave background experiments
Authors:
A. Nadolski,
A. M. Kofman,
J. D. Vieira,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. F. Cliche,
A. Cukierman,
T. de Haan,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
A. Foster,
J. Fu,
J. Gallicchio,
A. Gilbert
, et al. (49 additional authors not shown)
Abstract:
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth comp…
▽ More
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics motivates the development of quasi-optically-coupled (lenslet-coupled), multi-chroic detectors. These detectors can be sensitive across a broader bandwidth compared to waveguide-coupled detectors. However, the increase in bandwidth comes at a cost: the lenses (up to $\sim$700 mm diameter) and lenslets ($\sim$5 mm diameter, hemispherical lenses on the focal plane) used in these systems are made from high-refractive-index materials (such as silicon or amorphous aluminum oxide) that reflect nearly a third of the incident radiation. In order to maximize the faint CMB signal that reaches the detectors, the lenses and lenslets must be coated with an anti-reflective (AR) material. The AR coating must maximize radiation transmission in scientifically interesting bands and be cryogenically stable. Such a coating was developed for the third generation camera, SPT-3G, of the South Pole Telescope (SPT) experiment, but the materials and techniques used in the development are general to AR coatings for mm-wave optics. The three-layer polytetrafluoroethylene-based AR coating is broadband, inexpensive, and can be manufactured with simple tools. The coating is field tested; AR coated focal plane elements were deployed in the 2016-2017 austral summer and AR coated reimaging optics were deployed in 2017-2018.
△ Less
Submitted 31 August, 2018;
originally announced September 2018.
-
Optical Characterization of the SPT-3G Focal Plane
Authors:
Zhaodi Pan,
Peter Ade,
Zeeshan Ahmed,
Anderson Adam,
Jason Austermann,
Jessica Avva,
Ritoban Basu Thakur,
Bender Amy,
Bradford Benson,
John Carlstrom,
Faustin Carter,
Thomas Cecil,
Clarence Chang,
Jean-Francois Cliche,
Ariel Cukierman,
Edward Denison,
Tijmen de Haan,
Junjia Ding,
Matt Dobbs,
Daniel Dutcher,
Wendeline Everett,
Allen Foster,
Renae Gannon,
Adam Gilbert,
John Groh
, et al. (51 additional authors not shown)
Abstract:
The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lump…
▽ More
The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
SMT Queries Decomposition and Caching in Semi-Symbolic Model Checking
Authors:
Jan Mrázek,
Martin Jonáš,
Jiří Barnat
Abstract:
In semi-symbolic (control-explicit data-symbolic) model checking the state-space explosion problem is fought by representing sets of states by first-order formulas over the bit-vector theory. In this model checking approach, most of the verification time is spent in an SMT solver on deciding satisfiability of quantified queries, which represent equality of symbolic states. In this paper, we introd…
▽ More
In semi-symbolic (control-explicit data-symbolic) model checking the state-space explosion problem is fought by representing sets of states by first-order formulas over the bit-vector theory. In this model checking approach, most of the verification time is spent in an SMT solver on deciding satisfiability of quantified queries, which represent equality of symbolic states. In this paper, we introduce a new scheme for decomposition of symbolic states, which can be used to significantly improve the performance of any semi-symbolic model checker. Using the decomposition, a model checker can issue much simpler and smaller queries to the solver when compared to the original case. Some SMT calls may be even avoided completely, as the satisfaction of some of the simplified formulas can be decided syntactically. Moreover, the decomposition allows for an efficient caching scheme for quantified formulas. To support our theoretical contribution, we show the performance gain of our model checker SymDIVINE on a set of examples from the Software Verification Competition.
△ Less
Submitted 20 November, 2017;
originally announced November 2017.
-
On the Complexity of the Quantified Bit-Vector Arithmetic with Binary Encoding
Authors:
Martin Jonáš,
Jan Strejček
Abstract:
We study the precise computational complexity of deciding satisfiability of first-order quantified formulas over the theory of fixed-size bit-vectors with binary-encoded bit-widths and constants. This problem is known to be in EXPSPACE and to be NEXPTIME-hard. We show that this problem is complete for the complexity class AEXP(poly) -- the class of problems decidable by an alternating Turing machi…
▽ More
We study the precise computational complexity of deciding satisfiability of first-order quantified formulas over the theory of fixed-size bit-vectors with binary-encoded bit-widths and constants. This problem is known to be in EXPSPACE and to be NEXPTIME-hard. We show that this problem is complete for the complexity class AEXP(poly) -- the class of problems decidable by an alternating Turing machine using exponential time, but only a polynomial number of alternations between existential and universal states.
△ Less
Submitted 2 May, 2018; v1 submitted 5 December, 2016;
originally announced December 2016.
-
The Dark Energy Camera
Authors:
B. Flaugher,
H. T. Diehl,
K. Honscheid,
T. M. C. Abbott,
O. Alvarez,
R. Angstadt,
J. T. Annis,
M. Antonik,
O. Ballester,
L. Beaufore,
G. M. Bernstein,
R. A. Bernstein,
B. Bigelow,
M. Bonati,
D. Boprie,
D. Brooks,
E. J. Buckley-Geer,
J. Campa,
L. Cardiel-Sas,
F. J. Castander,
J. Castilla,
H. Cease,
J. M. Cela-Ruiz,
S. Chappa,
E. Chi
, et al. (93 additional authors not shown)
Abstract:
The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses…
▽ More
The Dark Energy Camera is a new imager with a 2.2-degree diameter field of view mounted at the prime focus of the Victor M. Blanco 4-meter telescope on Cerro Tololo near La Serena, Chile. The camera was designed and constructed by the Dark Energy Survey Collaboration, and meets or exceeds the stringent requirements designed for the wide-field and supernova surveys for which the collaboration uses it. The camera consists of a five element optical corrector, seven filters, a shutter with a 60 cm aperture, and a CCD focal plane of 250 micron thick fully-depleted CCDs cooled inside a vacuum Dewar. The 570 Mpixel focal plane comprises 62 2kx4k CCDs for imaging and 12 2kx2k CCDs for guiding and focus. The CCDs have 15 microns x15 microns pixels with a plate scale of 0.263 arc sec per pixel. A hexapod system provides state-of-the-art focus and alignment capability. The camera is read out in 20 seconds with 6-9 electrons readout noise. This paper provides a technical description of the camera's engineering, construction, installation, and current status.
△ Less
Submitted 11 April, 2015;
originally announced April 2015.
-
The PHENIX Forward Silicon Vertex Detector
Authors:
C. Aidala,
L. Anaya,
E. Anderssen,
A. Bambaugh,
A. Barron,
J. G. Boissevain,
J. Bok,
S. Boose,
M. L. Brooks,
S. Butsyk,
M. Cepeda,
P. Chacon,
S. Chacon,
L. Chavez,
T. Cote,
C. D'Agostino,
A. Datta,
K. DeBlasio,
L. DelMonte,
E. J. Desmond,
J. M. Durham,
D. Fields,
M. Finger,
C. Gingu,
B. Gonzales
, et al. (60 additional authors not shown)
Abstract:
A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a…
▽ More
A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a rapidity range of $1.2<|η|<2.2$ that closely matches the two existing PHENIX muon arms. Each station consists of 48 individual silicon sensors, each of which contains two columns of mini-strips with 75 $μ$m pitch in the radial direction and lengths in the $φ$ direction varying from 3.4 mm at the inner radius to 11.5 mm at the outer radius. The FVTX has approximately 0.54 million strips in each endcap. These are read out with FPHX chips, developed in collaboration with Fermilab, which are wire bonded directly to the mini-strips. The maximum strip occupancy reached in central Au-Au collisions is approximately 2.8%. The precision tracking provided by this device makes the identification of muons from secondary vertices away from the primary event vertex possible. The expected distance of closest approach (DCA) resolution of 200 $μ$m or better for particles with a transverse momentum of 5 GeV/$c$ will allow identification of muons from relatively long-lived particles, such as $D$ and $B$ mesons, through their broader DCA distributions.
△ Less
Submitted 14 February, 2014; v1 submitted 14 November, 2013;
originally announced November 2013.
-
Influence of Chain Interdiffusion Between Immiscible Polymers on Dewetting Dynamics
Authors:
Severine Coppee,
Sylvain Gabriele,
Alain M. Jonas,
Jacques Jestin,
Pascal Damman
Abstract:
The interface between two immiscible polymers, polystyrene (PS) and polydimethylsiloxane (PDMS), was studied by neutron reflectivity and dewetting by using free PS chains and PDMS brushes. Unexpectedly, we found that the PS chains diffuse in the PDMS brushes at temperatures well below the glass transition temperatures of PS, the dynamics being largely determined by the grafting density of the br…
▽ More
The interface between two immiscible polymers, polystyrene (PS) and polydimethylsiloxane (PDMS), was studied by neutron reflectivity and dewetting by using free PS chains and PDMS brushes. Unexpectedly, we found that the PS chains diffuse in the PDMS brushes at temperatures well below the glass transition temperatures of PS, the dynamics being largely determined by the grafting density of the brush. By this study, we demonstrate the major influence of the chains interdiffusion on the friction properties for a couple of immiscible polymers. By the way, the puzzling ageing of PS thin films observed from dewetting experiments is found to be directly related to modifications of the PS/PDMS interface.
△ Less
Submitted 10 April, 2009;
originally announced April 2009.
-
Mechanical properties of nanotubes of polyelectrolyte multilayers
Authors:
S. Stéphane Cuenot,
H. Alem,
G. Louarn,
S. Demoustier-Champagne,
A. M. Jonas
Abstract:
The elastic properties of nanotubes fabricated by layer-by-layer (LbL) assembly of polyelectrolytes in the nanopores of polycarbonate track-etched membranes have been investigated by resonant contact Atomic Force Microscopy (AFM), for nanotube diameters in the range of 100 to 200 nm. The elastic modulus of the nanotubes was computed from the resonance frequencies of a cantilever resting on freel…
▽ More
The elastic properties of nanotubes fabricated by layer-by-layer (LbL) assembly of polyelectrolytes in the nanopores of polycarbonate track-etched membranes have been investigated by resonant contact Atomic Force Microscopy (AFM), for nanotube diameters in the range of 100 to 200 nm. The elastic modulus of the nanotubes was computed from the resonance frequencies of a cantilever resting on freely suspended LbL nanotubes. An average value of 115MPa was found in air for Young's modulus of these nanostructures, well below the values reported for dry, flat multilayers, but in the range of values reported for water-swollen flat multilayers. These low values are most probably due to the lower degree of ionic cross-linking of LbL nanotubes and their consequently higher water content in air, resulting from the peculiar mode of growth of nanoconfined polyelectrolyte multilayers.
△ Less
Submitted 30 March, 2009;
originally announced March 2009.