-
Local Nanoscale Defective Phase Impurities Are the Sites of Degradation in Halide Perovskite Devices
Authors:
Stuart Macpherson,
Tiarnan A. S. Doherty,
Andrew J. Winchester,
Sofiia Kosar,
Duncan N. Johnstone,
Yu-Hsien Chiang,
Krzystof Galkowski,
Miguel Anaya,
Kyle Frohna,
Affan N. Iqbal,
Bart Roose,
Zahra Andaji-Garmaroudi,
Paul A. Midgley,
Keshav M. Dani,
Samuel D. Stranks
Abstract:
Halide perovskites excel in the pursuit of highly efficient thin film photovoltaics, with power conversion efficiencies reaching 25.5% in single junction and 29.5% in tandem halide perovskite/silicon solar cell configurations. Operational stability of perovskite solar cells remains a barrier to their commercialisation, yet a fundamental understanding of degradation processes, including the specifi…
▽ More
Halide perovskites excel in the pursuit of highly efficient thin film photovoltaics, with power conversion efficiencies reaching 25.5% in single junction and 29.5% in tandem halide perovskite/silicon solar cell configurations. Operational stability of perovskite solar cells remains a barrier to their commercialisation, yet a fundamental understanding of degradation processes, including the specific sites at which failure mechanisms occur, is lacking. Recently, we reported that performance-limiting deep sub-bandgap states appear in nanoscale clusters at particular grain boundaries in state-of-the-art $Cs_{0.05}FA_{0.78}MA_{0.17}Pb(I_{0.83}Br_{0.17})_{3}$ (MA=methylammonium, FA=formamidinium) perovskite films. Here, we combine multimodal microscopy to show that these very nanoscale defect clusters, which go otherwise undetected with bulk measurements, are sites at which degradation seeds. We use photoemission electron microscopy to visualise trap clusters and observe that these specific sites grow in defect density over time under illumination, leading to local reductions in performance parameters. Scanning electron diffraction measurements reveal concomitant structural changes at phase impurities associated with trap clusters, with rapid conversion to metallic lead through iodine depletion, eventually resulting in pinhole formation. By contrast, illumination in the presence of oxygen reduces defect densities and reverses performance degradation at these local clusters, where phase impurities instead convert to amorphous and electronically benign lead oxide. Our work shows that the trap** of charge carriers at sites associated with phase impurities, itself reducing performance, catalyses redox reactions that compromise device longevity. Importantly, we reveal that both performance losses and intrinsic degradation can be mitigated by eliminating these defective clusters.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Scanning electron diffraction tomography of strain
Authors:
Robert Tovey,
Duncan N. Johnstone,
Sean M. Collins,
William R. B. Lionheart,
Paul A. Midgley,
Martin Benning,
Carola-Bibiane Schönlieb
Abstract:
Strain engineering is used to obtain desirable materials properties in a range of modern technologies. Direct nanoscale measurement of the three-dimensional strain tensor field within these materials has however been limited by a lack of suitable experimental techniques and data analysis tools. Scanning electron diffraction has emerged as a powerful tool for obtaining two-dimensional maps of strai…
▽ More
Strain engineering is used to obtain desirable materials properties in a range of modern technologies. Direct nanoscale measurement of the three-dimensional strain tensor field within these materials has however been limited by a lack of suitable experimental techniques and data analysis tools. Scanning electron diffraction has emerged as a powerful tool for obtaining two-dimensional maps of strain components perpendicular to the incident electron beam direction. Extension of this method to recover the full three-dimensional strain tensor field has been restricted though by the absence of a formal framework for tensor tomography using such data. Here, we show that it is possible to reconstruct the full non-symmetric strain tensor field as the solution to an ill-posed tensor tomography inverse problem. We then demonstrate the properties of this tomography problem both analytically and computationally, highlighting why incorporating precession to perform scanning precession electron diffraction may be important. We establish a general framework for non-symmetric tensor tomography and demonstrate computationally its applicability for achieving strain tomography with scanning precession electron diffraction data.
△ Less
Submitted 10 November, 2020; v1 submitted 3 August, 2020;
originally announced August 2020.
-
Density-based clustering of crystal orientations and misorientations and the orix python library
Authors:
Duncan N. Johnstone,
Ben H. Martineau,
Phillip Crout,
Paul A. Midgley,
Alexander S. Eggeman
Abstract:
Crystal orientation map** experiments typically measure orientations that are similar within grains and misorientations that are similar along grain boundaries. Such (mis)orientation data will cluster in (mis)orientation space and clusters are more pronounced if preferred orientations or special orientation relationships are present. Here, cluster analysis of (mis)orientation data is described a…
▽ More
Crystal orientation map** experiments typically measure orientations that are similar within grains and misorientations that are similar along grain boundaries. Such (mis)orientation data will cluster in (mis)orientation space and clusters are more pronounced if preferred orientations or special orientation relationships are present. Here, cluster analysis of (mis)orientation data is described and demonstrated using distance metrics incorporating crystal symmetry and the density-based clustering algorithm DBSCAN. Frequently measured (mis)orientations are identified as corresponding to grains, grain boundaries or orientation relationships, which are visualised both spatially and in three-dimensional (mis)orientation spaces. A new open-source python library, orix, is also reported.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
Ultrafast long-range energy transport via light-matter coupling in organic semiconductor films
Authors:
Raj Pandya,
Richard Y. S. Chen,
Qifei Gu,
Jooyoung Sung,
Christoph Schnedermann,
Oluwafemi S. Ojambati,
Rohit Chikkaraddy,
Jeffrey Gorman,
Gianni Jacucci,
Olimpia D. Onelli,
Tom Willhammar,
Duncan N. Johnstone,
Sean M. Collins,
Paul A. Midgley,
Florian Auras,
Tomi Baikie,
Rahul Jayaprakash,
Fabrice Mathevet,
Richard Soucek,
Matthew Du,
Silvia Vignolini,
David G Lidzey,
Jeremy J. Baumberg,
Richard H. Friend,
Thierry Barisien
, et al. (7 additional authors not shown)
Abstract:
The formation of exciton-polaritons allows the transport of energy over hundreds of nanometres at velocities up to 10^6 m s^-1 in organic semiconductors films in the absence of external cavity structures.
The formation of exciton-polaritons allows the transport of energy over hundreds of nanometres at velocities up to 10^6 m s^-1 in organic semiconductors films in the absence of external cavity structures.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Crystallographic relationships of T-/S-phase aggregates in an Al-Cu-Mg-Ag alloy
Authors:
Jonas K. Sunde,
Duncan N. Johnstone,
Sigurd Wenner,
Antonius T. J. van Helvoort,
Paul A. Midgley,
Randi Holmestad
Abstract:
T-(Al20Cu2Mn3) phase dispersoids are important for limiting recovery and controlling grain growth in Al-Cu alloys. However, these dispersoids can also reduce precipitation hardening by acting as heterogeneous nucleation sites and may lead to increased susceptibility towards pitting corrosion when galvanically coupled with S-(Al2CuMg) phase precipitates. The interplay between T- and S-phases is the…
▽ More
T-(Al20Cu2Mn3) phase dispersoids are important for limiting recovery and controlling grain growth in Al-Cu alloys. However, these dispersoids can also reduce precipitation hardening by acting as heterogeneous nucleation sites and may lead to increased susceptibility towards pitting corrosion when galvanically coupled with S-(Al2CuMg) phase precipitates. The interplay between T- and S-phases is therefore important for understanding their effect on the mechanical and electrochemical properties of Al-Cu-Mg alloys. Here, the crystallographic relationships between the T-phase, S-phase, and surrounding Al matrix were investigated in an Al-1.31Cu-1.14Mg-0.13Ag-0.10Fe-0.28Mn (at.%) alloy by combining scanning precession electron diffraction with misorientation analysis in 3-dimensional axis-angle space and correlated high-resolution transmission electron microscopy. Orientation relationships are identified between all three phases, revealing S-T orientation relationships for the first time. Differences in S-Al orientation relationships for precipitates formed at T-phase interfaces compared to their non-interfacial counterparts were also identified. These insights provide a comprehensive assessment of the crystallographic relationships in T-/S-phase aggregates, which may guide future alloy design.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
Microfluidization of graphite and formulation of graphene-based conductive inks
Authors:
P. G. Karagiannidis,
S. A. Hodge,
L. Lombardi,
F. Tomarchio,
N. Decorde,
S. Milana,
I. Goykhman,
Y. Su,
S. V. Mesite,
D. N. Johnstone,
R. K. Leary,
P. A. Midgley,
N. M. Pugno,
F. Torrisi,
A. C. Ferrari
Abstract:
We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a…
▽ More
We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a simple and scalable production route for graphene-based conductive inks for large area printing in flexible electronics.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
