Showing 101–150 of 150 results for author: Johnson, S G

Anomalous near-field heat transfer between a cylinder and a perforated surface

Authors: Alejandro W. Rodriguez, M. T. Homer Reid, Jaime Varela, John D. Joannopoulos, Federico Capasso, Steven G. Johnson

Abstract: We predict that the radiative heat-transfer rate between a cylinder and a perforated surface depends non-monotonically on their separation. This anomalous behavior, which arises due to near-field effects, is explained using a heuristic model based on the interaction of a dipole with a plate. We show that nonmonotonicity depends not only on geometry and temperature but also on material dispersion -… ▽ More We predict that the radiative heat-transfer rate between a cylinder and a perforated surface depends non-monotonically on their separation. This anomalous behavior, which arises due to near-field effects, is explained using a heuristic model based on the interaction of a dipole with a plate. We show that nonmonotonicity depends not only on geometry and temperature but also on material dispersion - for micron and submicron objects, nonmonotonicity is present in polar dielectrics but absent in metals with small skin depths. △ Less

Submitted 18 July, 2012; v1 submitted 13 July, 2012; originally announced July 2012.

Journal ref: Phys. Rev. Lett. 110, 014301 (2013)

Fluctuating surface-current formulation of radiative heat transfer for arbitrary geometries

Authors: Alejandro W. Rodriguez, M. T. Homer Reid, Steven G. Johnson

Abstract: We describe a fluctuating surface-current formulation of radiative heat transfer, applicable to arbitrary geometries, that directly exploits standard, efficient, and sophisticated techniques from the boundary-element method. We validate as well as extend previous results for spheres and cylinders, and also compute the heat transfer in a more complicated geometry consisting of two interlocked rings… ▽ More We describe a fluctuating surface-current formulation of radiative heat transfer, applicable to arbitrary geometries, that directly exploits standard, efficient, and sophisticated techniques from the boundary-element method. We validate as well as extend previous results for spheres and cylinders, and also compute the heat transfer in a more complicated geometry consisting of two interlocked rings. Finally, we demonstrate that the method can be readily adapted to compute the spatial distribution of heat flux on the surface of the interacting bodies. △ Less

Submitted 3 July, 2012; v1 submitted 6 June, 2012; originally announced June 2012.

Journal ref: Phys. Rev. B 86, 220302(R) (2012)

A diameter--bandwidth product limitation of isolated-object cloaking

Authors: Hila Hashemi, Cheng Wei Qiu, Alexander P. McCauley, J. D. Joannopoulos, Steven G. Johnson

Abstract: We show that cloaking of isolated objects is subject to a diameter-bandwidth product limitation: as the size of the object increases, the bandwidth of good (small cross-section) cloaking decreases inversely with the diameter, as a consequence of causality constraints even for perfect fabrication and materials with negligible absorption. This generalizes a previous result that perfect cloaking of i… ▽ More We show that cloaking of isolated objects is subject to a diameter-bandwidth product limitation: as the size of the object increases, the bandwidth of good (small cross-section) cloaking decreases inversely with the diameter, as a consequence of causality constraints even for perfect fabrication and materials with negligible absorption. This generalizes a previous result that perfect cloaking of isolated objects over a nonzero bandwidth violates causality. Furthermore, we demonstrate broader causality-based scaling limitations on any bandwidth-averaged cloaking cross-section, using complex analysis and the optical theorem to transform the frequency-averaged problem into a single scattering problem with transformed materials. △ Less

Submitted 9 March, 2012; originally announced March 2012.

Comments: 8 pages, 2 figures

Fluctuating Surface Currents: A New Algorithm for Efficient Prediction of Casimir Interactions among Arbitrary Materials in Arbitrary Geometries. I. Theory

Authors: M. T. Homer Reid, Jacob White, Steven G. Johnson

Abstract: This paper presents a new method for the efficient numerical computation of Casimir interactions between objects of arbitrary geometries, composed of materials with arbitrary frequency-dependent electrical properties. Our method formulates the Casimir effect as an interaction between effective electric and magnetic current distributions on the surfaces of material bodies, and obtains Casimir energ… ▽ More This paper presents a new method for the efficient numerical computation of Casimir interactions between objects of arbitrary geometries, composed of materials with arbitrary frequency-dependent electrical properties. Our method formulates the Casimir effect as an interaction between effective electric and magnetic current distributions on the surfaces of material bodies, and obtains Casimir energies, forces, and torques from the spectral properties of a matrix that quantifies the interactions of these surface currents. The method can be formulated and understood in two distinct ways: \textbf{(1)} as a consequence of the familiar \textit{stress-tensor} approach to Casimir physics, or, alternatively, \textbf{(2)} as a particular case of the \textit{path-integral} approach to Casimir physics, and we present both formulations in full detail. In addition to providing an algorithm for computing Casimir interactions in geometries that could not be efficiently handled by any other method, the framework proposed here thus achieves an explicit unification of two seemingly disparate approaches to computational Casimir physics. △ Less

Submitted 12 July, 2012; v1 submitted 29 February, 2012; originally announced March 2012.

Comments: 32 pages, 6 figures. Corrected a typo in the X-axis label of Figure 5; added several references and made minor corrections

Journal ref: Phys. Rev. A 88 022514 (2013)

Design of thin-film photonic metamaterial Lüneburg lens using analytical approach

Authors: Hanhong Gao, Baile Zhang, Steven G. Johnson, George Barbastathis

Abstract: We design an all-dielectric Lüneburg lens as an adiabatic space-variant lattice explicitly accounting for finite film thickness. We describe an all-analytical approach to compensate for the finite height of subwavelength dielectric structures in the pass-band regime. This method calculates the effective refractive index of the infinite-height lattice from effective medium theory, then embeds a med… ▽ More We design an all-dielectric Lüneburg lens as an adiabatic space-variant lattice explicitly accounting for finite film thickness. We describe an all-analytical approach to compensate for the finite height of subwavelength dielectric structures in the pass-band regime. This method calculates the effective refractive index of the infinite-height lattice from effective medium theory, then embeds a medium of the same effective index into a slab waveguide of finite height and uses the waveguide dispersion diagram to calculate a new effective index. The results are compared with the conventional numerical treatment - a direct band diagram calculation, using a modified three-dimensional lattice with the superstrate and substrate included in the cell geometry. We show that the analytical results are in good agreement with the numerical ones, and the performance of the thin-film Lüneburg lens is quite different than the estimates obtained assuming infinite height. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 11 pages, 8 figures, uses opex3.sty

Modeling near-field radiative heat transfer from sharp objects using a general 3d numerical scattering technique

Authors: Alexander P. McCauley, M. T. Homer Reid, Matthias Krüger, Steven G. Johnson

Abstract: We examine the non-equilibrium radiative heat transfer between a plate and finite cylinders and cones, making the first accurate theoretical predictions for the total heat transfer and the spatial heat flux profile for three-dimensional compact objects including corners or tips. We find qualitatively different scaling laws for conical shapes at small separations, and in contrast to a flat/slightly… ▽ More We examine the non-equilibrium radiative heat transfer between a plate and finite cylinders and cones, making the first accurate theoretical predictions for the total heat transfer and the spatial heat flux profile for three-dimensional compact objects including corners or tips. We find qualitatively different scaling laws for conical shapes at small separations, and in contrast to a flat/slightly-curved object, a sharp cone exhibits a local \emph{minimum} in the spatially resolved heat flux directly below the tip. The method we develop, in which a scattering-theory formulation of thermal transfer is combined with a boundary-element method for computing scattering matrices, can be applied to three-dimensional objects of arbitrary shape. △ Less

Submitted 17 July, 2011; v1 submitted 11 July, 2011; originally announced July 2011.

Comments: 5 pages, 4 figures. Corrected background information in the introduction, results and discussion unchanged

Frequency-selective near-field enhancement of radiative heat transfer via photonic-crystal slabs: a general computational approach for arbitrary geometries and materials

Authors: Alejandro W. Rodriguez, Ognjen Ilic, Peter Bermel, Ivan Celanovic, John D. Joannopoulos, Marin Soljacic, Steven G. Johnson

Abstract: We demonstrate the possibility of achieving enhanced frequency-selective near-field radiative heat transfer between patterned (photonic crystal) slabs at designable frequencies and separations, exploiting a general numerical approach for computing heat transfer in arbitrary geometries and materials based on the finite-difference time-domain method. Our simulations reveal a tradeoff between selecti… ▽ More We demonstrate the possibility of achieving enhanced frequency-selective near-field radiative heat transfer between patterned (photonic crystal) slabs at designable frequencies and separations, exploiting a general numerical approach for computing heat transfer in arbitrary geometries and materials based on the finite-difference time-domain method. Our simulations reveal a tradeoff between selectivity and near-field enhancement as the slab--slab separation decreases, with the patterned heat transfer eventually reducing to the unpatterned result multiplied by a fill factor (described by a standard proximity approximation). We also find that heat transfer can be further enhanced at selective frequencies when the slabs are brought into a glide-symmetric configuration, a consequence of the degeneracies associated with the non-symmorphic symmetry group. △ Less

Submitted 26 August, 2011; v1 submitted 3 May, 2011; originally announced May 2011.

Journal ref: Physical Review Letters, Vol. 107, 114302 (2011)

Casimir repulsion beyond the dipole regime

Authors: Alexander P. McCauley, Alejandro W. Rodriguez, M. T. Homer Reid, Steven G. Johnson

Abstract: We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive for… ▽ More We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive force increases dramatically. Beyond this, the force rapidly switches over to attraction as the separation decreases further to zero, in line with the proximity force approximation. We demonstrate that this effect can be understood as a competition between an increased repulsion due to a larger polarizability of the central object interacting with increased fringing fields near the edge of the plate, and attractive forces due primarily to the nonzero thickness of the plate. In comparison with our previous work, we find that using the same plate geometry but replacing the single cylinder with a ring of cylinders, or more generally an extended uniaxial conductor, the repulsive force can be enhanced by a factor of approximately $10^3$. We conclude that this enhancement, although quite dramatic, is still too small to yield detectable repulsive Casimir forces. △ Less

Submitted 2 May, 2011; originally announced May 2011.

Comments: 7 pages, 5 figures

General scaling limitations of ground-plane and isolated-object cloaks

Authors: Hila Hashemi, A. Oskooi, J. D. Joannopoulos, Steven G. Johnson

Abstract: We prove that, for arbitrary three-dimensional transformation-based invisibility cloaking of an object above a ground plane or of isolated object, there are practical constraints that increase with the object size. In particular, we show that the cloak thickness must scale proportional to the thickness of the object being cloaked, assuming bounded refractive indices, and that absorption discrepanc… ▽ More We prove that, for arbitrary three-dimensional transformation-based invisibility cloaking of an object above a ground plane or of isolated object, there are practical constraints that increase with the object size. In particular, we show that the cloak thickness must scale proportional to the thickness of the object being cloaked, assuming bounded refractive indices, and that absorption discrepancies and other imperfections must scale inversely with the object thickness. For isolated objects, we also show that bounded refractive indices imply a lower bound on the effective cross-section. △ Less

Submitted 11 August, 2011; v1 submitted 18 February, 2011; originally announced February 2011.

Comments: 7 pages, 3 figures

Designing evanescent optical interactions to control the expression of Casimir forces in optomechanical structures

Authors: Alejandro W. Rodriguez, David Woolf, Pui-Chuen Hui, Eiji Iwase, Alexander P. McCauley, Federico Capasso, Marko Loncar, Steven G. Johnson

Abstract: We propose an optomechanical structure consisting of a photonic-crystal (holey) membrane suspended above a layered silicon-on-insulator substrate in which resonant bonding/antibonding optical forces created by externally incident light from above enable all-optical control and actuation of stiction effects induced by the Casimir force. In this way, one can control how the Casimir force is expresse… ▽ More We propose an optomechanical structure consisting of a photonic-crystal (holey) membrane suspended above a layered silicon-on-insulator substrate in which resonant bonding/antibonding optical forces created by externally incident light from above enable all-optical control and actuation of stiction effects induced by the Casimir force. In this way, one can control how the Casimir force is expressed in the mechanical dynamics of the membrane, not by changing the Casimir force directly but by optically modifying the geometry and counteracting the mechanical spring constant to bring the system in or out of regimes where Casimir physics dominate. The same optical response (reflection spectrum) of the membrane to the incident light can be exploited to accurately measure the effects of the Casimir force on the equilibrium separation of the membrane. △ Less

Submitted 18 April, 2011; v1 submitted 21 January, 2011; originally announced January 2011.

Journal ref: Applied Physics Letters Vol. 98, 194105 (2011)

Bonding, antibonding and tunable optical forces in asymmetric membranes

Authors: Alejandro W. Rodriguez, Alexander P. McCauley, Pui-Chuen Hui, David Woolf, Eiji Iwase, Federico Capasso, Marko Loncar, Steven G. Johnson

Abstract: We demonstrate that tunable attractive (bonding) and repulsive (anti-bonding) forces can arise in highly asymmetric structures coupled to external radiation, a consequence of the bonding/anti-bonding level repulsion of guided-wave resonances that was first predicted in symmetric systems. Our focus is a geometry consisting of a photonic-crystal (holey) membrane suspended above an unpatterned layere… ▽ More We demonstrate that tunable attractive (bonding) and repulsive (anti-bonding) forces can arise in highly asymmetric structures coupled to external radiation, a consequence of the bonding/anti-bonding level repulsion of guided-wave resonances that was first predicted in symmetric systems. Our focus is a geometry consisting of a photonic-crystal (holey) membrane suspended above an unpatterned layered substrate, supporting planar waveguide modes that can couple via the periodic modulation of the holey membrane. Asymmetric geometries have a clear advantage in ease of fabrication and experimental characterization compared to symmetric double-membrane structures. We show that the asymmetry can also lead to unusual behavior in the force magnitudes of a bonding/antibonding pair as the membrane separation changes, including nonmonotonic dependences on the separation. We propose a computational method that obtains the entire force spectrum via a single time-domain simulation, by Fourier-transforming the response to a short pulse and thereby obtaining the frequency-dependent stress tensor. We point out that by operating with two, instead of a single frequency, these evanescent forces can be exploited to tune the spring constant of the membrane without changing its equilibrium separation. △ Less

Submitted 16 January, 2011; v1 submitted 5 December, 2010; originally announced December 2010.

Journal ref: Optics Express, Vol. 19, No. 3, 2225-2241 (2011)

Casimir micro-sphere diclusters and three-body effects in fluids

Authors: Jaime Varela, Alejandro W. Rodriguez, Alexander P. McCauley, Steven G. Johnson

Abstract: Our previous article [Phys. Rev. Lett. 104, 060401 (2010)] predicted that Casimir forces induced by the material-dispersion properties of certain dielectrics can give rise to stable configurations of objects. This phenomenon was illustrated via a dicluster configuration of non-touching objects consisting of two spheres immersed in a fluid and suspended against gravity above a plate. Here, we exami… ▽ More Our previous article [Phys. Rev. Lett. 104, 060401 (2010)] predicted that Casimir forces induced by the material-dispersion properties of certain dielectrics can give rise to stable configurations of objects. This phenomenon was illustrated via a dicluster configuration of non-touching objects consisting of two spheres immersed in a fluid and suspended against gravity above a plate. Here, we examine these predictions from the perspective of a practical experiment and consider the influence of non-additive, three-body, and nonzero-temperature effects on the stability of the two spheres. We conclude that the presence of Brownian motion reduces the set of experimentally realizable silicon/teflon spherical diclusters to those consisting of layered micro-spheres, such as the hollow- core (spherical shells) considered here. △ Less

Submitted 12 April, 2011; v1 submitted 3 December, 2010; originally announced December 2010.

Comments: 11 pages, 9 figures

Degenerate four-wave mixing in triply-resonant Kerr cavities

Authors: David Ramirez, Alejandro W. Rodriguez, Hila Hashemi, J. D. Joannopoulos, Marin Soljačić, Steven G. Johnson

Abstract: We demonstrate theoretical conditions for highly-efficient degenerate four-wave mixing in triply-resonant nonlinear (Kerr) cavities. We employ a general and accurate temporal coupled-mode analysis in which the interaction of light in arbitrary microcavities is expressed in terms a set of coupling coefficients that we rigorously derive from the full Maxwell equations. Using the coupled-mode theory,… ▽ More We demonstrate theoretical conditions for highly-efficient degenerate four-wave mixing in triply-resonant nonlinear (Kerr) cavities. We employ a general and accurate temporal coupled-mode analysis in which the interaction of light in arbitrary microcavities is expressed in terms a set of coupling coefficients that we rigorously derive from the full Maxwell equations. Using the coupled-mode theory, we show that light consisting of an input signal of frequency $ω_0-Δω$ can, in the presence of pump light at $ω_0$, be converted with quantum-limited efficiency into an output shifted signal of frequency $ω_0 + Δω$, and we derive expressions for the critical input powers at which this occurs. We find that critical powers in the order of 10mW assuming very conservative cavity parameters (modal volumes $\sim10$ cubic wavelengths and quality factors $\sim1000$. The standard Manley-Rowe efficiency limits are obtained from the solution of the classical coupled-mode equations, although we also derive them from simple photon-counting "quantum" arguments. Finally, using a linear stability analysis, we demonstrate that maximal conversion efficiency can be retained even in the presence of self- and cross-phase modulation effects that generally act to disrupt the resonance condition. △ Less

Submitted 26 November, 2010; originally announced November 2010.

Comments: 13 pages, 8 figures. To appear in Physical Review A

Journal ref: Phys. Rev. A 83, 033834 (2011)

Calculation of nonzero-temperature Casimir forces in the time domain

Authors: Kai Pan, Alexander P. McCauley, Alejandro W. Rodriguez, M. T. Homer Reid, Jacob K. White, Steven G. Johnson

Abstract: We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against… ▽ More We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a non-monotonic behavior previously demonstrated in a piston-like geometry. △ Less

Submitted 21 November, 2010; originally announced November 2010.

Comments: 5 pages, 2 figures, submitted to Physical Review A Rapid Communication

Computation of Casimir Interactions between Arbitrary 3D Objects with Arbitrary Material Properties

Authors: M. T. Homer Reid, Jacob White, Steven G. Johnson

Abstract: We extend a recently introduced method for computing Casimir forces between arbitrarily--shaped metallic objects [M. T. H. Reid et al., Phys. Rev. Lett._103_ 040401 (2009)] to allow treatment of objects with arbitrary material properties, including imperfect conductors, dielectrics, and magnetic materials. Our original method considered electric currents on the surfaces of the interacting objects;… ▽ More We extend a recently introduced method for computing Casimir forces between arbitrarily--shaped metallic objects [M. T. H. Reid et al., Phys. Rev. Lett._103_ 040401 (2009)] to allow treatment of objects with arbitrary material properties, including imperfect conductors, dielectrics, and magnetic materials. Our original method considered electric currents on the surfaces of the interacting objects; the extended method considers both electric and magnetic surface current distributions, and obtains the Casimir energy of a configuration of objects in terms of the interactions of these effective surface currents. Using this new technique, we present the first predictions of Casimir interactions in several experimentally relevant geometries that would be difficult to treat with any existing method. In particular, we investigate Casimir interactions between dielectric nanodisks embedded in a dielectric fluid; we identify the threshold surface--surface separation at which finite--size effects become relevant, and we map the rotational energy landscape of bound nanoparticle diclusters. △ Less

Submitted 20 October, 2011; v1 submitted 26 October, 2010; originally announced October 2010.

Journal ref: Physical Review A, Vol. 84, No. 1, 010503(R) (2011)

Linear stability analysis of capillary instabilities for concentric cylindrical shells

Authors: X. Liang, D. S. Deng, J. -C. Nave, S. G. Johnson

Abstract: Motivated by complex multi-fluid geometries currently being explored in fibre-device manufacturing, we study capillary instabilities in concentric cylindrical flows of $N$ fluids with arbitrary viscosities, thicknesses, densities, and surface tensions in both the Stokes regime and for the full Navier--Stokes problem. Generalizing previous work by Tomotika (N=2), Stone & Brenner (N=3, equal viscosi… ▽ More Motivated by complex multi-fluid geometries currently being explored in fibre-device manufacturing, we study capillary instabilities in concentric cylindrical flows of $N$ fluids with arbitrary viscosities, thicknesses, densities, and surface tensions in both the Stokes regime and for the full Navier--Stokes problem. Generalizing previous work by Tomotika (N=2), Stone & Brenner (N=3, equal viscosities) and others, we present a full linear stability analysis of the growth modes and rates, reducing the system to a linear generalized eigenproblem in the Stokes case. Furthermore, we demonstrate by Plateau-style geometrical arguments that only axisymmetric instabilities need be considered. We show that the N=3 case is already sufficient to obtain several interesting phenomena: limiting cases of thin shells or low shell viscosity that reduce to N=2 problems, and a system with competing breakup processes at very different length scales. The latter is demonstrated with full 3-dimensional Stokes-flow simulations. Many $N > 3$ cases remain to be explored, and as a first step we discuss two illustrative $N \to \infty$ cases, an alternating-layer structure and a geometry with a continuously varying viscosity. △ Less

Submitted 1 September, 2011; v1 submitted 26 September, 2010; originally announced September 2010.

Journal ref: Journal of Fluid Mechanics, 2011

Structural anisotropy and orientation-induced Casimir repulsion in fluids

Authors: Alexander P. McCauley, F. S. S. Rosa, Alejandro W. Rodriguez, John D. Joannopoulos, D. A. R. Dalvit, Steven G. Johnson

Abstract: In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-character… ▽ More In this work we theoretically consider the Casimir force between two periodic arrays of nanowires (both in vacuum, and on a substrate separated by a fluid) at separations comparable to the period. Specifically, we compute the dependence of the exact Casimir force between the arrays under both lateral translations and rotations. Although typically the force between such structures is well-characterized by the Proximity Force Approximation (PFA), we find that in the present case the microstructure modulates the force in a way qualitatively inconsistent with PFA. We find instead that effective-medium theory, in which the slabs are treated as homogeneous, anisotropic dielectrics, gives a surprisingly accurate picture of the force, down to separations of half the period. This includes a situation for identical, fluid-separated slabs in which the exact force changes sign with the orientation of the wire arrays, whereas PFA predicts attraction. We discuss the possibility of detecting these effects in experiments, concluding that this effect is strong enough to make detection possible in the near future. △ Less

Submitted 12 May, 2011; v1 submitted 22 September, 2010; originally announced September 2010.

Comments: 12 pages, 9, figure. Published version with expanded discussion

Journal ref: Phys. Rev. A 83, 052503 (2011)

Is the electrostatic force between a point charge and a neutral metallic object always attractive?

Authors: Michael Levin, Steven G. Johnson

Abstract: We give an example of a geometry in which the electrostatic force between a point charge and a neutral metallic object is repulsive. The example consists of a point charge centered above a thin metallic hemisphere, positioned concave up. We show that this geometry has a repulsive regime using both a simple analytical argument and an exact calculation for an analogous two-dimensional geometry. Anal… ▽ More We give an example of a geometry in which the electrostatic force between a point charge and a neutral metallic object is repulsive. The example consists of a point charge centered above a thin metallic hemisphere, positioned concave up. We show that this geometry has a repulsive regime using both a simple analytical argument and an exact calculation for an analogous two-dimensional geometry. Analogues of this geometry-induced repulsion can appear in many other contexts, including Casimir systems. △ Less

Submitted 13 July, 2010; originally announced July 2010.

Comments: 7 pages, 7 figures

Journal ref: Am. J. Phys. 79, 843-849 (2011)

Numerical methods for computing Casimir interactions

Authors: Steven G. Johnson

Abstract: We review several different approaches for computing Casimir forces and related fluctuation-induced interactions between bodies of arbitrary shapes and materials. The relationships between this problem and well known computational techniques from classical electromagnetism are emphasized. We also review the basic principles of standard computational methods, categorizing them according to three cr… ▽ More We review several different approaches for computing Casimir forces and related fluctuation-induced interactions between bodies of arbitrary shapes and materials. The relationships between this problem and well known computational techniques from classical electromagnetism are emphasized. We also review the basic principles of standard computational methods, categorizing them according to three criteria---choice of problem, basis, and solution technique---that can be used to classify proposals for the Casimir problem as well. In this way, mature classical methods can be exploited to model Casimir physics, with a few important modifications. △ Less

Submitted 1 October, 2010; v1 submitted 2 July, 2010; originally announced July 2010.

Comments: 46 pages, 142 references, 5 figures. To appear in upcoming Lecture Notes in Physics book on Casimir Physics

Journal ref: In Casimir Physics, Lecture Notes in Physics vol. 834, ch. 6, pp. 175--218 (Springer, 2011)

Microstructure Effects for Casimir Forces in Chiral Metamaterials

Authors: Alexander P. McCauley, Rongkuo Zhao, M. T. Homer Reid, Alejandro W. Rodriguez, Jiangfeng Zhou, F. S. S. Rosa, John D. Joannopoulos, D. A. R. Dalvit, Costas M. Soukoulis, Steven G. Johnson

Abstract: We examine a recent prediction for the chirality-dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized "omega"-particle medium in the dilute approximation and identify the effects of struct… ▽ More We examine a recent prediction for the chirality-dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized "omega"-particle medium in the dilute approximation and identify the effects of structural inhomogeneity (i.e. proximity forces and anisotropy). We find that these microstructure effects dominate the force for separations where chirality was predicted to have a strong influence. To get observations of chirality free from microstructure effects, one must go to large separations where the effect of chirality is at most $\sim10^{-4}$ of the total force. △ Less

Submitted 28 June, 2010; originally announced June 2010.

Comments: 5 pages, 4 figures

Journal ref: Physical Review B, vol. 82, p. 165108, October 2010

A novel boundary element method using surface conductive absorbers for full-wave analysis of 3-D nanophotonics

Authors: Lei Zhang, Jung Hoon Lee, Ardavan Oskooi, Amit Hochman, Jacob K. White, Steven G. Johnson

Abstract: Fast surface integral equation (SIE) solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices generate fields both in an interior channel and in the infinite exterior domain. However, many devices of interest, such as optical couplers, have channels that can not be terminated without generating reflections. Generating absorbers for these channels is a new prob… ▽ More Fast surface integral equation (SIE) solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices generate fields both in an interior channel and in the infinite exterior domain. However, many devices of interest, such as optical couplers, have channels that can not be terminated without generating reflections. Generating absorbers for these channels is a new problem for SIE methods, as the methods were initially developed for problems with finite surfaces. In this paper we show that the obvious approach for eliminating reflections, making the channel mildly conductive outside the domain of interest, is inaccurate. We describe a new method, in which the absorber has a gradually increasing surface conductivity; such an absorber can be easily incorporated in fast integral equation solvers. Numerical experiments from a surface-conductivity modified FFT-accelerated PMCHW-based solver are correlated with analytic results, demonstrating that this new method is orders of magnitude more effective than a volume absorber, and that the smoothness of the surface conductivity function determines the performance of the absorber. In particular, we show that the magnitude of the transition reflection is proportional to 1/L^(2d+2), where L is the absorber length and d is the order of the differentiability of the surface conductivity function. △ Less

Submitted 28 April, 2010; originally announced April 2010.

Comments: 10 pages

Achieving a Strongly Temperature-Dependent Casimir Effect

Authors: Alejandro W. Rodriguez, David Woolf, Alexander P. McCauley, Federico Capasso, John D. Joannopoulos, Steven G. Johnson

Abstract: We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the… ▽ More We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, such as irreversible transitions, from suspension to stiction, as the temperature is varied. △ Less

Submitted 15 April, 2010; originally announced April 2010.

Journal ref: Phys.Rev.Lett.105:060401,2010

Delay-bandwidth and delay-loss limitations for cloaking of large objects

Authors: Hila Hashemi, Baile Zhang, J. D. Joannopoulos, Steven G. Johnson

Abstract: Based on a simple model of ground-plane cloaking, we argue that the diffculty of cloaking is fundamentally limited by delay-loss and delaylbandwidth/size limitations that worsen as the size of the object to be cloaked increases relative to the wavelength. These considerations must be taken into account when scaling experimental cloaking demonstrations from wavelength-scale objects towards larger s… ▽ More Based on a simple model of ground-plane cloaking, we argue that the diffculty of cloaking is fundamentally limited by delay-loss and delaylbandwidth/size limitations that worsen as the size of the object to be cloaked increases relative to the wavelength. These considerations must be taken into account when scaling experimental cloaking demonstrations from wavelength-scale objects towards larger sizes, and suggest quantitative material/loss challenges in cloaking human-scale objects. △ Less

Submitted 14 June, 2010; v1 submitted 30 March, 2010; originally announced March 2010.

Comments: 4 pages, 2 figures

Journal ref: Phys. Rev. Lett. 104, p. 253903 (2010)

Casimir repulsion between metallic objects in vacuum

Authors: Michael Levin, Alexander P. McCauley, Alejandro W. Rodriguez, M. T. Homer Reid, Steven G. Johnson

Abstract: We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable… ▽ More We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis. △ Less

Submitted 6 August, 2010; v1 submitted 17 March, 2010; originally announced March 2010.

Comments: 4 pages, 4 figures; added references, replaced Fig. 3

Journal ref: Phys. Rev. Lett. 105, 090403 (2010)

Capillary instability in concentric-cylindrical shell: numerical simulation and applications in composite microstructured fibers

Authors: D. S. Deng, J. -C. Nave, X. Liang, S. G. Johnson, Y. Fink

Abstract: Recent experimental observations have demonstrated interesting instability phenomenon during thermal drawing of microstructured glass/polymer fibers, and these observations motivate us to examine surface-tension-driven instabilities in concentric cylindrical shells of viscous fluids. In this paper, we focus on a single instability mechanism: classical capillary instabilities in the form of radial… ▽ More Recent experimental observations have demonstrated interesting instability phenomenon during thermal drawing of microstructured glass/polymer fibers, and these observations motivate us to examine surface-tension-driven instabilities in concentric cylindrical shells of viscous fluids. In this paper, we focus on a single instability mechanism: classical capillary instabilities in the form of radial fluctuations, solving the full Navier--Stokes equations numerically. In equal-viscosity cases where an analytical linear theory is available, we compare to the full numerical solution and delineate the regime in which the linear theory is valid. We also consider unequal-viscosity situations (similar to experiments) in which there is no published linear theory, and explain the numerical results with a simple asymptotic analysis. These results are then applied to experimental thermal drawing systems. We show that the observed instabilities are consistent with radial-fluctuation analysis, but cannot be predicted by radial fluctuations alone---an additional mechanism is required. We show how radial fluctuations alone, however, can be used to analyze various candidate material systems for thermal drawing, clearly ruling out some possibilities while suggesting others that have not yet been considered in experiments. △ Less

Submitted 5 August, 2010; v1 submitted 8 March, 2010; originally announced March 2010.

Comments: 13 pages, 13 figures

Journal ref: Optics Express, Vol. 19, Issue 17, pp. 16273-16290 (2011)

Sufficient conditions for two-dimensional localization by arbitrarily weak defects in periodic potentials with band gaps

Authors: Arthur Parzygnat, Karen K. Y. Lee, Yehuda Avniel, Steven G. Johnson

Abstract: We prove, via an elementary variational method, 1d and 2d localization within the band gaps of a periodic Schrodinger operator for any mostly negative or mostly positive defect potential, V, whose depth is not too great compared to the size of the gap. In a similar way, we also prove sufficient conditions for 1d and 2d localization below the ground state of such an operator. Furthermore, we extend… ▽ More We prove, via an elementary variational method, 1d and 2d localization within the band gaps of a periodic Schrodinger operator for any mostly negative or mostly positive defect potential, V, whose depth is not too great compared to the size of the gap. In a similar way, we also prove sufficient conditions for 1d and 2d localization below the ground state of such an operator. Furthermore, we extend our results to 1d and 2d localization in d dimensions; for example, a linear or planar defect in a 3d crystal. For the case of D-fold degenerate band edges, we also give sufficient conditions for localization of up to D states. △ Less

Submitted 28 April, 2010; v1 submitted 23 February, 2010; originally announced February 2010.

Comments: 9 pages, 3 figures

Journal ref: Phys. Rev. B 81, 155324 (2010)

Non-touching nanoparticle diclusters bound by repulsive and attractive Casimir forces

Authors: Alejandro W. Rodriguez, Alexander P. McCauley, David Woolf, Federico Capasso, John D. Joannopoulos, Steven G. Johnson

Abstract: We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clu… ▽ More We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clusters) of compact objects, which we illustrate via a "molecular" two-sphere dicluster geometry consiting of two bound spheres levitated above a gold slab. Our calculations also reveal a strong interplay between material and geometric dispersion, and this is exemplified by the qualitatively different stability behavior observed in planar versus spherical geometries. △ Less

Submitted 11 December, 2009; originally announced December 2009.

Journal ref: Physical Review Letters, Vol. 104, No. 16, 160402 (2010)

Efficient low-power terahertz generation via on-chip triply-resonant nonlinear frequency mixing

Authors: J. Bravo-Abad, A. W. Rodriguez, J. D. Joannopoulos, P. T. Rakich, S. G. Johnson, M. Soljacic

Abstract: Achieving efficient terahertz (THz) generation using compact turn-key sources operating at room temperature and modest power levels represents one of the critical challeges that must be overcome to realize truly practical applications based on THz. Up to now, the most efficient approaches to THz generation at room temperature -- relying mainly on optical rectification schemes -- require intricat… ▽ More Achieving efficient terahertz (THz) generation using compact turn-key sources operating at room temperature and modest power levels represents one of the critical challeges that must be overcome to realize truly practical applications based on THz. Up to now, the most efficient approaches to THz generation at room temperature -- relying mainly on optical rectification schemes -- require intricate phase-matching set-ups and powerful lasers. Here we show how the unique light-confining properties of triply-resonant photonic resonators can be tailored to enable dramatic enhancements of the conversion efficiency of THz generation via nonlinear frequency down-conversion processes. We predict that this approach can be used to reduce up to three orders of magnitude the pump powers required to reach quantum-limited conversion efficiency of THz generation in nonlinear optical material systems. Furthermore, we propose a realistic design readily accesible experimentally, both for fabrication and demonstration of optimal THz conversion efficiency at sub-W power levels. △ Less

Submitted 4 August, 2009; originally announced August 2009.

Efficient Terahertz Generation in Triply Resonant Nonlinear Photonic Crystal Microcavities

Authors: Ian B. Burgess, Yinan Zhang, Murray W. McCutcheon, Alejandro W. Rodriguez, Jorge Bravo-Abad, Steven G. Johnson, Marko Loncar

Abstract: We propose a scheme for efficient cavity-enhanced nonlinear THz generation via difference-frequency generation (DFG) processes using a triply resonant system based on photonic crystal cavities. We show that high nonlinear overlap can be achieved by coupling a THz cavity to a doubly-resonant, dual-polarization near-infrared (e.g. telecom band) photonic-crystal nanobeam cavity, allowing the mixing… ▽ More We propose a scheme for efficient cavity-enhanced nonlinear THz generation via difference-frequency generation (DFG) processes using a triply resonant system based on photonic crystal cavities. We show that high nonlinear overlap can be achieved by coupling a THz cavity to a doubly-resonant, dual-polarization near-infrared (e.g. telecom band) photonic-crystal nanobeam cavity, allowing the mixing of three mutually orthogonal fundamental cavity modes through a chi(2) nonlinearity. We demonstrate through coupled-mode theory that complete depletion of the pump frequency - i.e., quantum-limited conversion - is possible in an experimentally feasible geometry, with the operating output power at the point of optimal total conversion efficiency adjustable by varying the mode quality (Q) factors. △ Less

Submitted 4 August, 2009; originally announced August 2009.

Comments: 8 pages, 3 figures

Casimir forces in the time domain II: Applications

Authors: Alexander P. McCauley, Alejandro W. Rodriguez, John D. Joannopoulos, Steven G. Johnson

Abstract: Our preceding paper introduced a method to compute Casimir forces in arbitrary geometries and for arbitrary materials that was based on a finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on the efficient implementation of our method for geometries of practical interest and extend our previous proof-of-concept algorithm in one dimension to problems in two and three dimens… ▽ More Our preceding paper introduced a method to compute Casimir forces in arbitrary geometries and for arbitrary materials that was based on a finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on the efficient implementation of our method for geometries of practical interest and extend our previous proof-of-concept algorithm in one dimension to problems in two and three dimensions, introducing a number of new optimizations. We consider Casimir piston-like problems with nonmonotonic and monotonic force dependence on sidewall separation, both for previously solved geometries to validate our method and also for new geometries involving magnetic sidewalls and/or cylindrical pistons. We include realistic dielectric materials to calculate the force between suspended silicon waveguides or on a suspended membrane with periodic grooves, also demonstrating the application of PML absorbing boundaries and/or periodic boundaries. In addition we apply this method to a realizable three-dimensional system in which a silica sphere is stably suspended in a fluid above an indented metallic substrate. More generally, the method allows off-the-shelf FDTD software, already supporting a wide variety of materials (including dielectric, magnetic, and even anisotropic materials) and boundary conditions, to be exploited for the Casimir problem. △ Less

Submitted 26 October, 2009; v1 submitted 29 June, 2009; originally announced June 2009.

Comments: 11 pages, 12 figures. Includes additional examples (dispersive materials and fully three-dimensional systems)

Journal ref: Physical Review A, 81:012119, 2010

Spherical cloaking using nonlinear transformations for improved segmentation into concentric isotropic coatings

Authors: Cheng-Wei Qiu, Li Hu, Baile Zhang, Bae-Ian Wu, Steven G. Johnson, John D. Joannopoulos

Abstract: Two novel classes of spherical invisibility cloaks based on nonlinear transformation have been studied. The cloaking characteristics are presented by segmenting the nonlinear transformation based spherical cloak into concentric isotropic homogeneous coatings. Detailed investigations of the optimal discretization (e.g., thickness control of each layer, nonlinear factor, etc.) are presented for bo… ▽ More Two novel classes of spherical invisibility cloaks based on nonlinear transformation have been studied. The cloaking characteristics are presented by segmenting the nonlinear transformation based spherical cloak into concentric isotropic homogeneous coatings. Detailed investigations of the optimal discretization (e.g., thickness control of each layer, nonlinear factor, etc.) are presented for both linear and nonlinear spherical cloaks and their effects on invisibility performance are also discussed. The cloaking properties and our choice of optimal segmentation are verified by the numerical simulation of not only near-field electric-field distribution but also the far-field radar cross section (RCS). △ Less

Submitted 11 May, 2009; originally announced May 2009.

Comments: 12 pages, 8 figures

Journal ref: Opt. Express 17, 13467 (2009)

Efficient Computation of Casimir Interactions between Arbitrary 3D Objects

Authors: M. T. Homer Reid, Alejandro W. Rodriguez, Jacob White, Steven G. Johnson

Abstract: We introduce an efficient technique for computing Casimir energies and forces between objects of arbitrarily complex 3D geometries. In contrast to other recently developed methods, our technique easily handles non-spheroidal, non-axisymmetric objects and objects with sharp corners. Using our new technique, we obtain the first predictions of Casimir interactions in a number of experimentally rele… ▽ More We introduce an efficient technique for computing Casimir energies and forces between objects of arbitrarily complex 3D geometries. In contrast to other recently developed methods, our technique easily handles non-spheroidal, non-axisymmetric objects and objects with sharp corners. Using our new technique, we obtain the first predictions of Casimir interactions in a number of experimentally relevant geometries, including crossed cylinders and tetrahedral nanoparticles. △ Less

Submitted 4 April, 2009; originally announced April 2009.

Comments: 4 pages, 4 figures

Journal ref: Phys.Rev.Lett.103:040401,2009

Casimir forces in the time domain: I. Theory

Authors: Alejandro W. Rodriguez, Alexander P. McCauley, John D. Joannopoulos, Steven G. Johnson

Abstract: We introduce a method to compute Casimir forces in arbitrary geometries and for arbitrary materials based on the finite-difference time-domain (FDTD) scheme. The method involves the time-evolution of electric and magnetic fields in response to a set of current sources, in a modified medium with frequency-independent conductivity. The advantage of this approach is that it allows one to exploit ex… ▽ More We introduce a method to compute Casimir forces in arbitrary geometries and for arbitrary materials based on the finite-difference time-domain (FDTD) scheme. The method involves the time-evolution of electric and magnetic fields in response to a set of current sources, in a modified medium with frequency-independent conductivity. The advantage of this approach is that it allows one to exploit existing FDTD software, without modification, to compute Casimir forces. In this manuscript, part I, we focus on the derivation, implementation choices, and essential properties of the time-domain algorithm, considered both analytically and illustrated in the simplest parallel-plate geometry. Part II presents results for more complex two- and three-dimensional geometries. △ Less

Submitted 21 April, 2009; v1 submitted 1 April, 2009; originally announced April 2009.

Journal ref: Physical Review A, 80(1):012115, 2009

Difference-frequency generation with quantum-limited efficiency in triply-resonant nonlinear cavities

Authors: Ian B. Burgess, Alejandro W. Rodriguez, Murray W. McCutcheon, Jorge Bravo-Abad, Yinan Zhang, Steven G. Johnson, Marko Loncar

Abstract: We present a comprehensive study of second-order nonlinear difference frequency generation in triply resonant cavities using a theoretical framework based on coupled-mode theory. We show that optimal quantum-limited conversion efficiency can be achieved at any pump power when the powers at the pump and idler frequencies satisfy a critical relationship. We demonstrate the existence of a broad par… ▽ More We present a comprehensive study of second-order nonlinear difference frequency generation in triply resonant cavities using a theoretical framework based on coupled-mode theory. We show that optimal quantum-limited conversion efficiency can be achieved at any pump power when the powers at the pump and idler frequencies satisfy a critical relationship. We demonstrate the existence of a broad parameter range in which all triply-resonant DFG processes exhibit monostable conversion. We also demonstrate the existence of a geometry-dependent bistable region. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Comments: 10 pages, 3 figures

Journal ref: Optics Express, Vol. 17, pp.9241-9251 (2009).

Ingredients of a Casimir analog computer

Authors: Alejandro W. Rodriguez, Alexander P. McCauley, John D. Joannopoulos, Steven G. Johnson

Abstract: We present the basic ingredients of a technique to compute quantum Casimir forces at micrometer scales using antenna measurements at tabletop, e.g. centimeter, scales, forming a type of analog computer for the Casimir force. This technique relies on a correspondence that we derive between the contour integration of the Casimir force in the complex frequency plane and the electromagnetic response… ▽ More We present the basic ingredients of a technique to compute quantum Casimir forces at micrometer scales using antenna measurements at tabletop, e.g. centimeter, scales, forming a type of analog computer for the Casimir force. This technique relies on a correspondence that we derive between the contour integration of the Casimir force in the complex frequency plane and the electromagnetic response of a physical dissipative medium in a finite, real frequency bandwidth. △ Less

Submitted 9 March, 2009; v1 submitted 3 March, 2009; originally announced March 2009.

Journal ref: Proceedings of the National Academy of Sciences, Vol. 107, 9531-9536, 2010

Nonlinear harmonic generation and devices in doubly-resonant Kerr cavities

Authors: Hila Hashemi, Alejandro W. Rodriguez, J. D. Joannopoulos, Marin Soljačić, Steven G. Johnson

Abstract: We describea theoretical analysis of the nonlinear dynamics of third-harmonic generation ($ω\to3ω$) via Kerr ($\chithree$) nonlinearities in a resonant cavity with resonances at both $ω$ and $3ω$. Such a doubly resonant cavity greatly reduces the required power for efficient harmonic generation, by a factor of $\sim V/Q^2$ where $V$ is the modal volume and $Q$ is the lifetime, and can even exhib… ▽ More We describea theoretical analysis of the nonlinear dynamics of third-harmonic generation ($ω\to3ω$) via Kerr ($\chithree$) nonlinearities in a resonant cavity with resonances at both $ω$ and $3ω$. Such a doubly resonant cavity greatly reduces the required power for efficient harmonic generation, by a factor of $\sim V/Q^2$ where $V$ is the modal volume and $Q$ is the lifetime, and can even exhibit 100% harmonic conversion efficiency at a critical input power. However, we show that it also exhibits a rich variety of nonlinear dynamics, such as multistable solutions and long-period limit cycles.We describe how to compensate for self/cross-phase modulation (which otherwise shifts the cavity frequencies out of resonance), and how to excite the different stable solutions (and especially the high-efficiency solutions) by specially modulated input pulses. △ Less

Submitted 22 August, 2008; originally announced August 2008.

Comments: 12 pages, 12 figures

Stable suspension and dispersion-induced transitions from repulsive Casimir forces between fluid-separated eccentric cylinders

Authors: Alejandro W. Rodriguez, J. N. Munday, J. D. Joannopoulos, Federico Capasso, Diego A. R. Dalvit, Steven G. Johnson

Abstract: Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, v… ▽ More Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation lengthscale, which is explained as a consequence of material dispersion. △ Less

Submitted 8 November, 2008; v1 submitted 25 July, 2008; originally announced July 2008.

Comments: Published in Physical Review Letters. Vol. 101, page, 190404 (2008)

Rigorous sufficient conditions for index-guided mode in microstructured dielectric waveguides

Authors: Karen K. Y. Lee, Yehuda Avniel, Steven G. Johnson

Abstract: We derive a sufficient condition for the existence of index-guided modes in a very general class of dielectric waveguides, including photonic-crystal fibers (arbitrary periodic claddings, such as ``holey fibers''), anisotropic materials, and waveguides with periodicity along the propagation direction. This condition provides a rigorous guarantee of cutoff-free index-guided modes in any such stru… ▽ More We derive a sufficient condition for the existence of index-guided modes in a very general class of dielectric waveguides, including photonic-crystal fibers (arbitrary periodic claddings, such as ``holey fibers''), anisotropic materials, and waveguides with periodicity along the propagation direction. This condition provides a rigorous guarantee of cutoff-free index-guided modes in any such structure where the core is formed by increasing the index of refraction (e.g. removing a hole). It also provides a weaker guarantee of guidance in cases where the refractive index is increased ``on average'' (precisely defined). The proof is based on a simple variational method, inspired by analogous proofs of localization for two-dimensional attractive potentials in quantum mechanics. △ Less

Submitted 19 March, 2008; originally announced March 2008.

Comments: 15 pages

Journal ref: Optics Express Vol. 16, Issue 13, pp. 9261-9275 (2008)

Repulsive, nonmonotonic Casimir forces in a glide-symmetric geometry

Authors: Alejandro W. Rodriguez, John D. Joannopoulos, Steven G. Johnson

Abstract: We describe a three-dimensional geometry that exhibits a repulsive Casimir force using ordinary metallic materials, as computed via an exact numerical method (no uncontrolled approximations). The geometry consists of a zippelike, glide-symmetric structure formed of interleaved metal brackets attached to parallel plates. Depending on the separation, the perpendicular force between the plates/brac… ▽ More We describe a three-dimensional geometry that exhibits a repulsive Casimir force using ordinary metallic materials, as computed via an exact numerical method (no uncontrolled approximations). The geometry consists of a zippelike, glide-symmetric structure formed of interleaved metal brackets attached to parallel plates. Depending on the separation, the perpendicular force between the plates/brackets varies from attractive (large separations) to repulsive (intermediate distances) and back to attractive (close separations), with one point of stable equilibrium in the perpendicular direction. This geometry was motivated by a simple intuition of attractive interactions between surfaces, and so we also consider how a rough proximity force approximation of pairwise attractions compares to the exact calculations. △ Less

Submitted 11 February, 2008; originally announced February 2008.

Journal ref: Physical Review A, Vol. 77, No. 6, 062107 (2008)

Computation and visualization of photonic quasicrystal spectra via Blochs theorem

Authors: Alejandro W. Rodriguez, Alexander P. McCauley, Yehuda Avniel, Steven G. Johnson

Abstract: Previous methods for determining photonic quasicrystal (PQC) spectra have relied on the use of large supercells to compute the eigenfrequencies and/or local density of states (LDOS). In this manuscript, we present a method by which the energy spectrum and the eigenstates of a PQC can be obtained by solving Maxwells equations in higher dimensions for any PQC defined by the standard cut-and-projec… ▽ More Previous methods for determining photonic quasicrystal (PQC) spectra have relied on the use of large supercells to compute the eigenfrequencies and/or local density of states (LDOS). In this manuscript, we present a method by which the energy spectrum and the eigenstates of a PQC can be obtained by solving Maxwells equations in higher dimensions for any PQC defined by the standard cut-and-project construction, to which a generalization of Blochs theorem applies. In addition, we demonstrate how one can compute band structures with defect states in the higher-dimensional superspace with no additional computational cost. As a proof of concept, these general ideas are demonstrated for the simple case of one-dimensional quasicrystals, which can also be solved by simple transfer-matrix techniques. △ Less

Submitted 7 March, 2008; v1 submitted 13 November, 2007; originally announced November 2007.

Comments: Published in Physical Review B, 77 104201, 2008

Journal ref: Physical Review B, 77 104201, 2008

Nonmonotonic effects of parallel sidewalls on Casimir forces between cylinders

Authors: Sahand Jamal Rahi, Alejandro W. Rodriguez, Thorsten Emig, Robert L. Jaffe, Steven G. Johnson, Mehran Kardar

Abstract: We analyze the Casimir force between two parallel infinite metal cylinders, with nearby metal plates (sidewalls), using complementary methods for mutual confirmation. The attractive force between cylinders is shown to have a nonmonotonic dependence on the separation to the plates. This intrinsically multi-body phenomenon, which occurs with either one or two sidewalls (generalizing an earlier res… ▽ More We analyze the Casimir force between two parallel infinite metal cylinders, with nearby metal plates (sidewalls), using complementary methods for mutual confirmation. The attractive force between cylinders is shown to have a nonmonotonic dependence on the separation to the plates. This intrinsically multi-body phenomenon, which occurs with either one or two sidewalls (generalizing an earlier result for squares between two sidewalls), does not follow from any simple two-body force description. We can, however, explain the nonmonotonicity by considering the screening (enhancement) of the interactions by the fluctuating charges (currents) on the two cylinders, and their images on the nearby plate(s). Furthermore, we show that this effect also implies a nonmonotonic dependence of the cylinder-plate force on the cylinder-cylinder separation. △ Less

Submitted 13 November, 2007; originally announced November 2007.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. A 77, 030101(R) (2008)

Optical-approximation analysis of sidewall-spacing effects on the force between two squares with parallel sidewalls

Authors: Saad Zaheer, Alejandro W. Rodriguez, Steven G. Johnson, Robert L. Jaffe

Abstract: Using the ray-optics approximation, we analyze the Casimir force in a two dimensional domain formed by two metallic blocks adjacent to parallel metallic sidewalls, which are separated from the blocks by a finite distance h. For h > 0, the ray-optics approach is not exact because diffraction effects are neglected. Nevertheless, we show that ray optics is able to qualitatively reproduce a surprisi… ▽ More Using the ray-optics approximation, we analyze the Casimir force in a two dimensional domain formed by two metallic blocks adjacent to parallel metallic sidewalls, which are separated from the blocks by a finite distance h. For h > 0, the ray-optics approach is not exact because diffraction effects are neglected. Nevertheless, we show that ray optics is able to qualitatively reproduce a surprising effect recently identified in an exact numerical calculation: the force between the blocks varies non-monotonically with h. In this sense, the ray-optics approach captures an essential part of the physics of multi-body interactions in this system, unlike simpler pairwise-interaction approximations such as PFA. Furthermore, by comparison to the exact numerical results, we are able to quantify the impact of diffraction on Casimir forces in this geometry. △ Less

Submitted 5 September, 2007; v1 submitted 5 September, 2007; originally announced September 2007.

Journal ref: Physical Review A, Vol. 76, No. 6, 063816 (2007)

Type-IV DCT, DST, and MDCT algorithms with reduced numbers of arithmetic operations

Authors: Xuancheng Shao, Steven G. Johnson

Abstract: We present algorithms for the type-IV discrete cosine transform (DCT-IV) and discrete sine transform (DST-IV), as well as for the modified discrete cosine transform (MDCT) and its inverse, that achieve a lower count of real multiplications and additions than previously published algorithms, without sacrificing numerical accuracy. Asymptotically, the operation count is reduced from ~2NlogN to ~(1… ▽ More We present algorithms for the type-IV discrete cosine transform (DCT-IV) and discrete sine transform (DST-IV), as well as for the modified discrete cosine transform (MDCT) and its inverse, that achieve a lower count of real multiplications and additions than previously published algorithms, without sacrificing numerical accuracy. Asymptotically, the operation count is reduced from ~2NlogN to ~(17/9)NlogN for a power-of-two transform size N, and the exact count is strictly lowered for all N > 4. These results are derived by considering the DCT to be a special case of a DFT of length 8N, with certain symmetries, and then pruning redundant operations from a recent improved fast Fourier transform algorithm (based on a recursive rescaling of the conjugate-pair split radix algorithm). The improved algorithms for DST-IV and MDCT follow immediately from the improved count for the DCT-IV. △ Less

Submitted 29 January, 2009; v1 submitted 31 August, 2007; originally announced August 2007.

Comments: 11 pages

Journal ref: Signal Processing vol. 88, issue 6, p. 1313-1326 (2008)

Perturbation theory for anisotropic dielectric interfaces, and application to sub-pixel smoothing of discretized numerical methods

Authors: Chris Kottke, Ardavan Farjadpour, Steven G. Johnson

Abstract: We derive a correct first-order perturbation theory in electromagnetism for cases where an interface between two anisotropic dielectric materials is slightly shifted. Most previous perturbative methods give incorrect results for this case, even to lowest order, because of the complicated discontinuous boundary conditions on the electric field at such an interface. Our final expression is simply… ▽ More We derive a correct first-order perturbation theory in electromagnetism for cases where an interface between two anisotropic dielectric materials is slightly shifted. Most previous perturbative methods give incorrect results for this case, even to lowest order, because of the complicated discontinuous boundary conditions on the electric field at such an interface. Our final expression is simply a surface integral, over the material interface, of the continuous field components from the unperturbed structure. The derivation is based on a "localized" coordinate-transformation technique, which avoids both the problem of field discontinuities and the challenge of constructing an explicit coordinate transformation by taking a limit in which a coordinate perturbation is infinitesimally localized around the boundary. Not only is our result potentially useful in evaluating boundary perturbations, e.g. from fabrication imperfections, in highly anisotropic media such as many metamaterials, but it also has a direct application in numerical electromagnetism. In particular, we show how it leads to a sub-pixel smoothing scheme to ameliorate staircasing effects in discretized simulations of anisotropic media, in such a way as to greatly reduce the numerical errors compared to other proposed smoothing schemes. △ Less

Submitted 7 August, 2007; originally announced August 2007.

Comments: 10 pages

Virtual photons in imaginary time: Computing exact Casimir forces via standard numerical-electromagnetism techniques

Authors: Alejandro Rodriguez, Mihai Ibanescu, Davide Iannuzzi, J. D. Joannopoulos, Steven G. Johnson

Abstract: We describe a numerical method to compute Casimir forces in arbitrary geometries, for arbitrary dielectric and metallic materials, with arbitrary accuracy (given sufficient computational resources). Our approach, based on well-established integration of the mean stress tensor evaluated via the fluctuation-dissipation theorem, is designed to directly exploit fast methods developed for classical c… ▽ More We describe a numerical method to compute Casimir forces in arbitrary geometries, for arbitrary dielectric and metallic materials, with arbitrary accuracy (given sufficient computational resources). Our approach, based on well-established integration of the mean stress tensor evaluated via the fluctuation-dissipation theorem, is designed to directly exploit fast methods developed for classical computational electromagnetism, since it only involves repeated evaluation of the Green's function for imaginary frequencies (equivalently, real frequencies in imaginary time). We develop the approach by systematically examining various formulations of Casimir forces from the previous decades and evaluating them according to their suitability for numerical computation. We illustrate our approach with a simple finite-difference frequency-domain implementation, test it for known geometries such as a cylinder and a plate, and apply it to new geometries. In particular, we show that a piston-like geometry of two squares sliding between metal walls, in both two and three dimensions with both perfect and realistic metallic materials, exhibits a surprising non-monotonic ``lateral'' force from the walls. △ Less

Submitted 16 October, 2007; v1 submitted 24 May, 2007; originally announced May 2007.

Comments: Published in Physical Review A, vol. 76, page 032106 (2007)

Chi2 and chi3 harmonic generation at a critical power in inhomogeneous doubly resonant cavities

Authors: Alejandro Rodriguez, Marin Soljacic, John D. Joannopoulos, Steven G. Johnson

Abstract: We derive general conditions for 100 percent frequency conversion in any doubly resonant nonlinear cavity, for both second- and third-harmonic generation via chi2 and chi3 nonlinearities. We find that conversion efficiency is optimized for a certain critical power depending on the cavity parameters, and assuming reasonable parameters we predict 100 percent conversion using milliwatts of power or… ▽ More We derive general conditions for 100 percent frequency conversion in any doubly resonant nonlinear cavity, for both second- and third-harmonic generation via chi2 and chi3 nonlinearities. We find that conversion efficiency is optimized for a certain critical power depending on the cavity parameters, and assuming reasonable parameters we predict 100 percent conversion using milliwatts of power or less. These results follow from a semi-analytical coupled-mode theory framework which is generalized from previous work to include both chi2 and chi3 media as well as inhomogeneous (fully vectorial) cavities, analyzed in the high-efficiency limit where down-conversion processes lead to a maximum efficiency at the critical power, and which is verified by direct finite-difference time-domain (FDTD) simulations of the nonlinear Maxwell equations. Explicit formulas for the nonlinear coupling coefficients are derived in terms of the linear cavity eigenmodes, which can be used to design and evaluate cavities in arbitrary geometries. △ Less

Submitted 24 May, 2007; originally announced May 2007.

Journal ref: Optics Express, Vol. 15, No. 12, 7303-7318 (2007)

Computation and visualization of Casimir forces in arbitrary geometries: non-monotonic lateral forces and failure of proximity-force approximations

Authors: Alejandro Rodriguez, Mihai Ibanescu, Davide Iannuzzi, Federico Capasso, John D. Joannopoulos, Steven G. Johnson

Abstract: We present a method of computing Casimir forces for arbitrary geometries, with any desired accuracy, that can directly exploit the efficiency of standard numerical-electromagnetism techniques. Using the simplest possible finite-difference implementation of this approach, we obtain both agreement with past results for cylinder-plate geometries, and also present results for new geometries. In part… ▽ More We present a method of computing Casimir forces for arbitrary geometries, with any desired accuracy, that can directly exploit the efficiency of standard numerical-electromagnetism techniques. Using the simplest possible finite-difference implementation of this approach, we obtain both agreement with past results for cylinder-plate geometries, and also present results for new geometries. In particular, we examine a piston-like problem involving two dielectric and metallic squares sliding between two metallic walls, in two and three dimensions, respectively, and demonstrate non-additive and non-monotonic changes in the force due to these lateral walls. △ Less

Submitted 9 August, 2007; v1 submitted 14 April, 2007; originally announced April 2007.

Comments: Accepted for publication in Physical Review Letters. (Expected publication: Vol. 99 (8) 2007)

Journal ref: Physical Review Letters, Vol. 99, No. 8, 80401 (2007)

Efficient generation of correlated random numbers using Chebyshev-optimal magnitude-only IIR filters

Authors: Alejandro Rodriguez, Steven G. Johnson

Abstract: We compare several methods for the efficient generation of correlated random sequences (colored noise) by filtering white noise to achieve a desired correlation spectrum. We argue that a class of IIR filter-design techniques developed in the 1970s, which obtain the global Chebyshev-optimum minimum-phase filter with a desired magnitude and arbitrary phase, are uniquely suited for this problem but… ▽ More We compare several methods for the efficient generation of correlated random sequences (colored noise) by filtering white noise to achieve a desired correlation spectrum. We argue that a class of IIR filter-design techniques developed in the 1970s, which obtain the global Chebyshev-optimum minimum-phase filter with a desired magnitude and arbitrary phase, are uniquely suited for this problem but have seldom been used. The short filters that result from such techniques are crucial for applications of colored noise in physical simulations involving random processes, for which many long random sequences must be generated and computational time and memory are at a premium. △ Less

Submitted 13 April, 2007; v1 submitted 14 March, 2007; originally announced March 2007.

Comments: 4 page, 4 figures

Type-II/III DCT/DST algorithms with reduced number of arithmetic operations

Authors: Xuancheng Shao, Steven G. Johnson

Abstract: We present algorithms for the discrete cosine transform (DCT) and discrete sine transform (DST), of types II and III, that achieve a lower count of real multiplications and additions than previously published algorithms, without sacrificing numerical accuracy. Asymptotically, the operation count is reduced from ~ 2N log_2 N to ~ (17/9) N log_2 N for a power-of-two transform size N. Furthermore,… ▽ More We present algorithms for the discrete cosine transform (DCT) and discrete sine transform (DST), of types II and III, that achieve a lower count of real multiplications and additions than previously published algorithms, without sacrificing numerical accuracy. Asymptotically, the operation count is reduced from ~ 2N log_2 N to ~ (17/9) N log_2 N for a power-of-two transform size N. Furthermore, we show that a further N multiplications may be saved by a certain rescaling of the inputs or outputs, generalizing a well-known technique for N=8 by Arai et al. These results are derived by considering the DCT to be a special case of a DFT of length 4N, with certain symmetries, and then pruning redundant operations from a recent improved fast Fourier transform algorithm (based on a recursive rescaling of the conjugate-pair split radix algorithm). The improved algorithms for DCT-III, DST-II, and DST-III follow immediately from the improved count for the DCT-II. △ Less

Submitted 29 January, 2009; v1 submitted 29 March, 2007; originally announced March 2007.

Comments: 9 pages

ACM Class: F.2.1

Journal ref: Signal Processing vol. 88, issue 6, p. 1553-1564 (2008)

Evanescent-Wave Bonding Between Optical Waveguides

Authors: Michelle L. Povinelli, Marko Loncar, Mihai Ibanescu, Elizabeth J. Smythe, Steven G. Johnson, Federico Capasso, J. D. Joannopoulos

Abstract: Forces arising from overlap between the guided waves of parallel, microphotonic waveguides are calculated. Both attractive and repulsive forces, determined by the choice of relative input phase, are found. Using realistic parameters for a silicon-on-insulator material system, we estimate that the forces are large enough to cause observable displacements. Our results illustrate the potential for… ▽ More Forces arising from overlap between the guided waves of parallel, microphotonic waveguides are calculated. Both attractive and repulsive forces, determined by the choice of relative input phase, are found. Using realistic parameters for a silicon-on-insulator material system, we estimate that the forces are large enough to cause observable displacements. Our results illustrate the potential for a broader class of optically-tunable microphotonic devices and microstructured artificial materials. △ Less

Submitted 9 September, 2005; originally announced September 2005.

Comments: 2 color figures