-
High temperature decomposition and age hardening of single-phase wurtzite Ti$_{1-x}$Al$_{x}$N thin films grown by cathodic arc deposition
Authors:
J. Salamania,
F. Bock,
L. J. S. Johnson,
F. Tasnádi,
K. M. Calamba Kwick,
A. F. Farhadizaeh,
I. A. Abrikosov,
L. Rogström,
M. Odén
Abstract:
We investigated the high temperature decomposition behavior of wurtzite phase Ti$_{1-x}$Al$_{x}$N films using experimental methods and first-principles calculations. Single phase metastable wurtzite Ti$_{1-x}$Al$_{x}$N (x = 0.65, 0.75, 085 and 0.95) solid solution films were grown by cathodic arc deposition using low duty cycle pulsed substrate-bias voltage. First-principles calculated elastic con…
▽ More
We investigated the high temperature decomposition behavior of wurtzite phase Ti$_{1-x}$Al$_{x}$N films using experimental methods and first-principles calculations. Single phase metastable wurtzite Ti$_{1-x}$Al$_{x}$N (x = 0.65, 0.75, 085 and 0.95) solid solution films were grown by cathodic arc deposition using low duty cycle pulsed substrate-bias voltage. First-principles calculated elastic constants of the wurtzite Ti$_{1-x}$Al$_{x}$N phase show a strong dependence on alloy composition. The predicted phase diagram shows a miscibility gap with an unstable region. High resolution scanning transmission electron microscopy and chemical map** demonstrate decomposition of the films after high temperature annealing (950$^{\circ}$C), which resulted in nanoscale chemical compositional modulations containing Ti-rich and Al-rich regions with coherent or semi coherent interfaces. This spinodal decomposition of the wurtzite film causes age hardening of 1-2 GPa.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations
Authors:
J. Salamania,
D. G. Sangiovanni,
A. Kraych,
K. M. Calamba Kwick,
I. C. Schramm,
L. J. S. Johnson,
R. Boyd,
B. Bakhit,
T. W. Hsu,
M. Mrovec,
L. Rogström,
F. Tasnádi,
I. A. Abrikosov,
M. Odén
Abstract:
Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These includ…
▽ More
Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These include, besides the expected primary full a/2{110}<1$\bar{1}$0> dislocation, Shockley partial dislocations a/6{111}<11$\bar{2}$> and sessile Lomer edge dislocations a/2{100}<011>. Density-functional theory and classical interatomic potential simulations complement STEM observations by recovering the atomic structure of the different dislocation types, estimating Peierls stresses, and providing insights on the chemical bonding nature at the core. The generated models of the dislocation cores suggest locally enhanced metal-metal bonding, weakened Ti-N bonds, and N vacancy-pinning that effectively reduces the mobilities of {110}<1$\bar{1}$0> and {111}<11$\bar{2}$> dislocations. Our findings underscore that the presence of different dislocation types and their effects on chemical bonding should be considered in the design and interpretations of nanoscale and macroscopic properties of TiN.
△ Less
Submitted 28 October, 2022; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Predicting properties of hard-coating alloys using ab-initio and machine learning methods
Authors:
H. Levämäki,
F. Tasnadi,
D. G. Sangiovanni,
L. J. S. Johnson,
R. Armiento,
I. A. Abrikosov
Abstract:
Accelerated design of novel hard coating materials requires state-of-the-art computational tools, which include data-driven techniques, building databases, and training machine learning models against the databases. In this work, we present a development of a heavily automated high-throughput workflow to build a database of industrially relevant hard coating materials, such as binary and ternary n…
▽ More
Accelerated design of novel hard coating materials requires state-of-the-art computational tools, which include data-driven techniques, building databases, and training machine learning models against the databases. In this work, we present a development of a heavily automated high-throughput workflow to build a database of industrially relevant hard coating materials, such as binary and ternary nitrides. We use Vienna Ab initio Simulation package as the density functional theory calculator and the high-throughput toolkit to automate the calculation workflow. We calculate and present results, including the elastic constants, one of the key materials parameter that determines mechanical properties of the coatings, for X(1-x)Y(x)N binary and ternary nitrides, where X,Y in {Al, Ti, Zr, Hf} and fraction x = 0, 1/4, 1/2, 3/4, 1. We explore ways for ML techniques to support and complement the designed databases. We find that the crystal graph convolutional neural network model trained on Materials Project data for ordered lattices has sufficient prediction accuracy for the disordered nitrides, suggesting that the existing databases provide important data for predicting mechanical properties of qualitatively different type of material systems, in our case hard coating alloys, not included in the original dataset.
△ Less
Submitted 23 November, 2021; v1 submitted 1 November, 2021;
originally announced November 2021.
-
Forward modelling of Kepler-band variability due to faculae and spots
Authors:
Luke J. Johnson,
Charlotte N. Norris,
Yvonne C. Unruh,
Sami K. Solanki,
Natalie Krivova,
Veronika Witzke,
Alexander I. Shapiro
Abstract:
Variability observed in photometric lightcurves of late-type stars (on timescales longer than a day) is a dominant noise source in exoplanet surveys and results predominantly from surface manifestations of stellar magnetic activity, namely faculae and spots. The implementation of faculae in lightcurve models is an open problem, with scaling typically based on spectra equivalent to hot stellar atmo…
▽ More
Variability observed in photometric lightcurves of late-type stars (on timescales longer than a day) is a dominant noise source in exoplanet surveys and results predominantly from surface manifestations of stellar magnetic activity, namely faculae and spots. The implementation of faculae in lightcurve models is an open problem, with scaling typically based on spectra equivalent to hot stellar atmospheres or assuming a solar-derived facular contrast. We modelled rotational (single period) lightcurves of active G2, K0, M0 and M2 stars, with Sun-like surface distributions and realistic limb-dependent contrasts for faculae and spots. The sensitivity of lightcurve variability to changes in model parameters such as stellar inclination, feature area coverage, spot temperature, facular region magnetic flux density and active band latitudes is explored. For our lightcurve modelling approach we used actress, a geometrically accurate model for stellar variability. actress generates 2-sphere maps representing stellar surfaces and populates them with user-prescribed spot and facular region distributions. From this, lightcurves can be calculated at any inclination. Quiet star limb darkening and limb-dependent facular contrasts were derived from MURaM 3D magnetoconvection simulations using ATLAS9. 1D stellar atmosphere models were used for the spot contrasts. We applied actress in Monte-Carlo simulations, calculating lightcurve variability amplitudes in the Kepler band. We found that, for a given spectral type and stellar inclination, spot temperature and spot area coverage have the largest effect on variability of all simulation parameters. For a spot coverage of 1%, the typical variability of a solar-type star is around 2 parts-per-thousand. The presence of faculae clearly affects the mean brightness and lightcurve shape, but has relatively little influence on the variability.
△ Less
Submitted 23 April, 2021;
originally announced April 2021.
-
ExoSim: the Exoplanet Observation Simulator
Authors:
Subhajit Sarkar,
Enzo Pascale,
Andreas Papageorgiou,
Luke J. Johnson,
Ingo Waldmann
Abstract:
A new generation of exoplanet research beckons and with it the need for simulation tools that accurately predict signal and noise in transit spectroscopy observations. We developed ExoSim: an end-to-end simulator that models noise and systematics in a dynamical simulation. ExoSim improves on previous simulators in the complexity of its simulation, versatility of use and its ability to be generical…
▽ More
A new generation of exoplanet research beckons and with it the need for simulation tools that accurately predict signal and noise in transit spectroscopy observations. We developed ExoSim: an end-to-end simulator that models noise and systematics in a dynamical simulation. ExoSim improves on previous simulators in the complexity of its simulation, versatility of use and its ability to be generically applied to different instruments. It performs a dynamical simulation that can capture temporal effects, such as correlated noise and systematics on the light curve. It has also been extensively validated, including against real results from the Hubble WFC3 instrument. We find ExoSim is accurate to within 5% in most comparisons. ExoSim can interact with other models which simulate specific time-dependent processes. A dedicated star spot simulator allows ExoSim to produce simulated observations that include spot and facula contamination. ExoSim has been used extensively in the Phase A and B design studies of the ARIEL mission, and has many potential applications in the field of transit spectroscopy.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Strength, transformation toughening and fracture dynamics of rocksalt-structure Ti1-xAlxN (0 <= x <= 0.75) alloys
Authors:
D. G. Sangiovanni,
F. Tasnadi,
L. J. S. Johnson,
M. Oden,
I. A. Abrikosov
Abstract:
Ab initio-calculated ideal strength and toughness describe the upper limits for mechanical properties attainable in real systems and can, therefore, be used in selection criteria for materials design. We employ density-functional ab initio molecular dynamics (AIMD) to investigate the mechanical properties of defect-free rocksalt-structure (B1) TiN and B1 Ti1-xAlxN (x = 0.25, 0.5, 0.75) solid solut…
▽ More
Ab initio-calculated ideal strength and toughness describe the upper limits for mechanical properties attainable in real systems and can, therefore, be used in selection criteria for materials design. We employ density-functional ab initio molecular dynamics (AIMD) to investigate the mechanical properties of defect-free rocksalt-structure (B1) TiN and B1 Ti1-xAlxN (x = 0.25, 0.5, 0.75) solid solutions subject to [001], [110], and [111] tensile deformation at room temperature. We determine the alloys' ideal strength and toughness, elastic responses, and ability to plastically deform up to fracture as a function of the Al content. Overall, TiN exhibits greater ideal moduli of resilience and tensile strengths than TiAlN solid solutions. Nevertheless, AIMD modelingshows that, irrespective of the strain direction, the binary compound systematically fractures by brittle cleavage at its yield point. The simulations also indicate that Ti0.5Al0.5N and Ti0.25Al0.75N solid solutions are inherently more resistant to fracture and possess much greater toughness than TiN, due to the activation of local structural transformations (primarily of B1 -> wurtzite type) beyond the elastic-response regime. In sharp contrast, TiAlN alloys with 25% Al exhibit similar brittleness as TiN. The results of this work are examples of the limitations of elasticity-based criteria for prediction of strength, brittleness, ductility, and toughness in materials able to undergo phase transitions with loading. Furthermore, comparing present and previous findings, we suggest a general principle for design of hard ceramic solid solutions that are thermodynamically inclined to dissipate extreme mechanical stresses via transformation toughening mechanisms.
△ Less
Submitted 14 February, 2020; v1 submitted 13 December, 2019;
originally announced December 2019.
