-
Photonic integration of an optical atomic clock
Authors:
Z. L. Newman,
V. Maurice,
T. E. Drake,
J. R. Stone,
T. C. Briles,
D. T. Spencer,
C. Fredrick,
Q. Li,
D. Westly,
B. R. Ilic,
B. Shen,
M. -G. Suh,
K. Y. Yang,
C. Johnson,
D. M. S. Johnson,
L. Hollberg,
K. Vahala,
K. Srinivasan,
S. A. Diddams,
J. Kitching,
S. B. Papp,
M. T Hummon
Abstract:
Laboratory optical atomic clocks achieve remarkable accuracy (now counted to 18 digits or more), opening possibilities to explore fundamental physics and enable new measurements. However, their size and use of bulk components prevent them from being more widely adopted in applications that require precision timing. By leveraging silicon-chip photonics for integration and to reduce component size a…
▽ More
Laboratory optical atomic clocks achieve remarkable accuracy (now counted to 18 digits or more), opening possibilities to explore fundamental physics and enable new measurements. However, their size and use of bulk components prevent them from being more widely adopted in applications that require precision timing. By leveraging silicon-chip photonics for integration and to reduce component size and complexity, we demonstrate a compact optical-clock architecture. Here a semiconductor laser is stabilized to an optical transition in a microfabricated rubidium vapor cell, and a pair of interlocked Kerr-microresonator frequency combs provide fully coherent optical division of the clock laser to generate an electronic 22 GHz clock signal with a fractional frequency instability of one part in 10^13. These results demonstrate key concepts of how to use silicon-chip devices in future portable and ultraprecise optical clocks.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
Real-Time Object Pose Estimation with Pose Interpreter Networks
Authors:
Jimmy Wu,
Bolei Zhou,
Rebecca Russell,
Vincent Kee,
Syler Wagner,
Mitchell Hebert,
Antonio Torralba,
David M. S. Johnson
Abstract:
In this work, we introduce pose interpreter networks for 6-DoF object pose estimation. In contrast to other CNN-based approaches to pose estimation that require expensively annotated object pose data, our pose interpreter network is trained entirely on synthetic pose data. We use object masks as an intermediate representation to bridge real and synthetic. We show that when combined with a segmenta…
▽ More
In this work, we introduce pose interpreter networks for 6-DoF object pose estimation. In contrast to other CNN-based approaches to pose estimation that require expensively annotated object pose data, our pose interpreter network is trained entirely on synthetic pose data. We use object masks as an intermediate representation to bridge real and synthetic. We show that when combined with a segmentation model trained on RGB images, our synthetically trained pose interpreter network is able to generalize to real data. Our end-to-end system for object pose estimation runs in real-time (20 Hz) on live RGB data, without using depth information or ICP refinement.
△ Less
Submitted 3 August, 2018;
originally announced August 2018.
-
SegICP-DSR: Dense Semantic Scene Reconstruction and Registration
Authors:
Jay M. Wong,
Syler Wagner,
Connor Lawson,
Vincent Kee,
Mitchell Hebert,
Justin Rooney,
Gian-Luca Mariottini,
Rebecca Russell,
Abraham Schneider,
Rahul Chipalkatty,
David M. S. Johnson
Abstract:
To enable autonomous robotic manipulation in unstructured environments, we present SegICP-DSR, a real- time, dense, semantic scene reconstruction and pose estimation algorithm that achieves mm-level pose accuracy and standard deviation (7.9 mm, σ=7.6 mm and 1.7 deg, σ=0.7 deg) and suc- cessfully identified the object pose in 97% of test cases. This represents a 29% increase in accuracy, and a 14%…
▽ More
To enable autonomous robotic manipulation in unstructured environments, we present SegICP-DSR, a real- time, dense, semantic scene reconstruction and pose estimation algorithm that achieves mm-level pose accuracy and standard deviation (7.9 mm, σ=7.6 mm and 1.7 deg, σ=0.7 deg) and suc- cessfully identified the object pose in 97% of test cases. This represents a 29% increase in accuracy, and a 14% increase in success rate compared to SegICP in cluttered, unstruc- tured environments. The performance increase of SegICP-DSR arises from (1) improved deep semantic segmentation under adversarial training, (2) precise automated calibration of the camera intrinsic and extrinsic parameters, (3) viewpoint specific ray-casting of the model geometry, and (4) dense semantic ElasticFusion point clouds for registration. We benchmark the performance of SegICP-DSR on thousands of pose-annotated video frames and demonstrate its accuracy and efficacy on two tight tolerance gras** and insertion tasks using a KUKA LBR iiwa robotic arm.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
SegICP: Integrated Deep Semantic Segmentation and Pose Estimation
Authors:
Jay M. Wong,
Vincent Kee,
Tiffany Le,
Syler Wagner,
Gian-Luca Mariottini,
Abraham Schneider,
Lei Hamilton,
Rahul Chipalkatty,
Mitchell Hebert,
David M. S. Johnson,
Jimmy Wu,
Bolei Zhou,
Antonio Torralba
Abstract:
Recent robotic manipulation competitions have highlighted that sophisticated robots still struggle to achieve fast and reliable perception of task-relevant objects in complex, realistic scenarios. To improve these systems' perceptive speed and robustness, we present SegICP, a novel integrated solution to object recognition and pose estimation. SegICP couples convolutional neural networks and multi…
▽ More
Recent robotic manipulation competitions have highlighted that sophisticated robots still struggle to achieve fast and reliable perception of task-relevant objects in complex, realistic scenarios. To improve these systems' perceptive speed and robustness, we present SegICP, a novel integrated solution to object recognition and pose estimation. SegICP couples convolutional neural networks and multi-hypothesis point cloud registration to achieve both robust pixel-wise semantic segmentation as well as accurate and real-time 6-DOF pose estimation for relevant objects. Our architecture achieves 1cm position error and <5^\circ$ angle error in real time without an initial seed. We evaluate and benchmark SegICP against an annotated dataset generated by motion capture.
△ Less
Submitted 5 September, 2017; v1 submitted 5 March, 2017;
originally announced March 2017.
-
Enhanced atom interferometer readout through the application of phase shear
Authors:
Alex Sugarbaker,
Susannah M. Dickerson,
Jason M. Hogan,
David M. S. Johnson,
Mark A. Kasevich
Abstract:
We present a method for determining the phase and contrast of a single shot of an atom interferometer. The application of a phase shear across the atom ensemble yields a spatially varying fringe pattern at each output port, which can be imaged directly. This method is broadly relevant to atom interferometric precision measurement, as we demonstrate in a 10 m Rb-87 atomic fountain by implementing a…
▽ More
We present a method for determining the phase and contrast of a single shot of an atom interferometer. The application of a phase shear across the atom ensemble yields a spatially varying fringe pattern at each output port, which can be imaged directly. This method is broadly relevant to atom interferometric precision measurement, as we demonstrate in a 10 m Rb-87 atomic fountain by implementing an atom interferometric gyrocompass with 10 millidegree precision.
△ Less
Submitted 14 May, 2013;
originally announced May 2013.
-
Multi-axis inertial sensing with long-time point source atom interferometry
Authors:
Susannah M. Dickerson,
Jason M. Hogan,
Alex Sugarbaker,
David M. S. Johnson,
Mark A. Kasevich
Abstract:
We show that light-pulse atom interferometry with atomic point sources and spatially resolved detection enables multi-axis (two rotation, one acceleration) precision inertial sensing at long interrogation times. Using this method, we demonstrate a light-pulse atom interferometer for Rb-87 with 1.4 cm peak wavepacket separation and a duration of 2T = 2.3 seconds. The inferred acceleration sensitivi…
▽ More
We show that light-pulse atom interferometry with atomic point sources and spatially resolved detection enables multi-axis (two rotation, one acceleration) precision inertial sensing at long interrogation times. Using this method, we demonstrate a light-pulse atom interferometer for Rb-87 with 1.4 cm peak wavepacket separation and a duration of 2T = 2.3 seconds. The inferred acceleration sensitivity of each shot is 6.7 * 10^(-12) g, which improves on previous limits by more than two orders of magnitude. We also measure the Earth's rotation rate with a precision of 200 nrad/s.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
A Precision Angle Sensor using an Optical Lever inside a Sagnac Interferometer
Authors:
J. M. Hogan,
J. Hammer,
S. -w. Chiow,
S. Dickerson,
D. M. S. Johnson,
T. Kovachy,
A. Sugarbaker,
M. A. Kasevich
Abstract:
We built an ultra low noise angle sensor by combining a folded optical lever and a Sagnac interferometer. The instrument has a measured noise floor of 1.3 prad / Hz^(1/2) at 2.4 kHz. We achieve this record angle sensitivity using a proof-of-concept apparatus with a conservative N=11 bounces in the optical lever. This technique could be extended to reach sub-picoradian / Hz^(1/2) sensitivities with…
▽ More
We built an ultra low noise angle sensor by combining a folded optical lever and a Sagnac interferometer. The instrument has a measured noise floor of 1.3 prad / Hz^(1/2) at 2.4 kHz. We achieve this record angle sensitivity using a proof-of-concept apparatus with a conservative N=11 bounces in the optical lever. This technique could be extended to reach sub-picoradian / Hz^(1/2) sensitivities with an optimized design.
△ Less
Submitted 25 February, 2011;
originally announced February 2011.
-
An Atomic Gravitational Wave Interferometric Sensor in Low Earth Orbit (AGIS-LEO)
Authors:
Jason M. Hogan,
David M. S. Johnson,
Susannah Dickerson,
Tim Kovachy,
Alex Sugarbaker,
Sheng-wey Chiow,
Peter W. Graham,
Mark A. Kasevich,
Babak Saif,
Surjeet Rajendran,
Philippe Bouyer,
Bernard D. Seery,
Lee Feinberg,
Ritva Keski-Kuha
Abstract:
We propose an atom interferometer gravitational wave detector in low Earth orbit (AGIS-LEO). Gravitational waves can be observed by comparing a pair of atom interferometers separated over a ~30 km baseline. In the proposed configuration, one or three of these interferometer pairs are simultaneously operated through the use of two or three satellites in formation flight. The three satellite configu…
▽ More
We propose an atom interferometer gravitational wave detector in low Earth orbit (AGIS-LEO). Gravitational waves can be observed by comparing a pair of atom interferometers separated over a ~30 km baseline. In the proposed configuration, one or three of these interferometer pairs are simultaneously operated through the use of two or three satellites in formation flight. The three satellite configuration allows for the increased suppression of multiple noise sources and for the detection of stochastic gravitational wave signals. The mission will offer a strain sensitivity of < 10^(-18) / Hz^(1/2) in the 50 mHz - 10 Hz frequency range, providing access to a rich scientific region with substantial discovery potential. This band is not currently addressed with the LIGO or LISA instruments. We analyze systematic backgrounds that are relevant to the mission and discuss how they can be mitigated at the required levels. Some of these effects do not appear to have been considered previously in the context of atom interferometry, and we therefore expect that our analysis will be broadly relevant to atom interferometric precision measurements. Finally, we present a brief conceptual overview of shorter-baseline (< 100 m) atom interferometer configurations that could be deployed as proof-of-principle instruments on the International Space Station (AGIS-ISS) or an independent satellite.
△ Less
Submitted 14 September, 2010;
originally announced September 2010.
-
Optical Lattices as Waveguides and Beam Splitters for Atom Interferometry: An Analytical Treatment and Proposal of Applications
Authors:
Tim Kovachy,
Jason M. Hogan,
David M. S. Johnson,
Mark A. Kasevich
Abstract:
We provide an analytical description of the dynamics of an atom in an optical lattice using the method of perturbative adiabatic expansion. A precise understanding of the lattice-atom interaction is essential to taking full advantage of the promising applications that optical lattices offer in the field of atom interferometry. One such application is the implementation of Large Momentum Transfer…
▽ More
We provide an analytical description of the dynamics of an atom in an optical lattice using the method of perturbative adiabatic expansion. A precise understanding of the lattice-atom interaction is essential to taking full advantage of the promising applications that optical lattices offer in the field of atom interferometry. One such application is the implementation of Large Momentum Transfer (LMT) beam splitters that can potentially provide multiple order of magnitude increases in momentum space separations over current technology. We also propose interferometer geometries where optical lattices are used as waveguides for the atoms throughout the duration of the interferometer sequence. Such a technique could simultaneously provide a multiple order of magnitude increase in sensitivity and a multiple order of magnitude decrease in interferometer size for many applications as compared to current state-of-the-art atom interferometers.
△ Less
Submitted 24 February, 2010; v1 submitted 18 October, 2009;
originally announced October 2009.
-
Broadband Optical Serrodyne Frequency Shifting
Authors:
D. M. S. Johnson,
J. M. Hogan,
S. -w. Chiow,
M. A. Kasevich
Abstract:
We demonstrate serrodyne frequency shifting of light from 200 MHz to 1.2 GHz with an efficiency of better than 60 percent. The frequency shift is imparted by an electro-optic phase modulator driven by a high-frequency, high-fidelity sawtooth waveform that is passively generated by a commercially available Non-Linear Transmission Line (NLTL). We also implement a push-pull configuration using two…
▽ More
We demonstrate serrodyne frequency shifting of light from 200 MHz to 1.2 GHz with an efficiency of better than 60 percent. The frequency shift is imparted by an electro-optic phase modulator driven by a high-frequency, high-fidelity sawtooth waveform that is passively generated by a commercially available Non-Linear Transmission Line (NLTL). We also implement a push-pull configuration using two serrodyne-driven phase modulators allowing for continuous tuning between -1.6 GHz and +1.6 GHz. Compared to competing technologies, this technique is simple and robust, and offers the largest available tuning range in this frequency band.
△ Less
Submitted 9 September, 2009;
originally announced September 2009.
-
Light-pulse atom interferometry
Authors:
Jason M. Hogan,
David M. S. Johnson,
Mark A. Kasevich
Abstract:
The light-pulse atom interferometry method is reviewed. Applications of the method to inertial navigation and tests of the Equivalence Principle are discussed.
The light-pulse atom interferometry method is reviewed. Applications of the method to inertial navigation and tests of the Equivalence Principle are discussed.
△ Less
Submitted 19 June, 2008;
originally announced June 2008.