-
Phase-field chemo-mechanical modelling of corrosion-induced cracking in reinforced concrete subjected to non-uniform chloride-induced corrosion
Authors:
E. Korec,
M. Jirasek,
H. S. Wong,
E. Martínez-Pañeda
Abstract:
A model for corrosion-induced cracking of reinforced concrete subjected to non-uniform chloride-induced corrosion is presented. The gradual corrosion initiation of the steel surface is investigated by simulating chloride transport considering binding. The transport of iron from the steel surface, its subsequent precipitation into rust, and the associated precipitation-induced pressure are explicit…
▽ More
A model for corrosion-induced cracking of reinforced concrete subjected to non-uniform chloride-induced corrosion is presented. The gradual corrosion initiation of the steel surface is investigated by simulating chloride transport considering binding. The transport of iron from the steel surface, its subsequent precipitation into rust, and the associated precipitation-induced pressure are explicitly modelled. Model results, obtained through finite element simulations, agree very well with experimental data, showing significantly improved accuracy over uniform corrosion modelling. The results obtained from case studies reveal that crack-facilitated transport of chlorides cannot be neglected, that the size of the anodic region must be considered, and that precipitate accumulation in pores can take years.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
A phase-field chemo-mechanical model for corrosion-induced cracking in reinforced concrete
Authors:
E. Korec,
M. Jirasek,
H. S. Wong,
E. Martínez-Pañeda
Abstract:
We present a new mechanistic framework for corrosion-induced cracking in reinforced concrete that resolves the underlying chemo-mechanical processes. The framework combines, for the first time, (i) a model for reactive transport and precipitation of dissolved Fe2+ and Fe3+ ions in the concrete pore space, (ii) a precipitation eigenstrain model for the pressure caused by the accumulation of precipi…
▽ More
We present a new mechanistic framework for corrosion-induced cracking in reinforced concrete that resolves the underlying chemo-mechanical processes. The framework combines, for the first time, (i) a model for reactive transport and precipitation of dissolved Fe2+ and Fe3+ ions in the concrete pore space, (ii) a precipitation eigenstrain model for the pressure caused by the accumulation of precipitates (rusts) under pore confinement conditions, (iii) a phase-field model calibrated for the quasi-brittle fracture behaviour of concrete, and (iv) a damage-dependent diffusivity tensor. Finite element model predictions show good agreement with experimental data from impressed current tests under natural-like corrosion current densities.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
Determining Molecular Complexity using Assembly Theory and Spectroscopy
Authors:
Michael Jirasek,
Abhishek Sharma,
Jessica R. Bame,
S. Hessam M. Mehr,
Nicola Bell,
Stuart M. Marshall,
Cole Mathis,
Alasdair Macleod,
Geoffrey J. T. Cooper,
Marcel Swart,
Rosa Mollfulleda,
Leroy Cronin
Abstract:
Determining the complexity of molecules has important applications from molecular design to understanding the history of the process that led to the formation of the molecule. Currently, it is not possible to experimentally determine, without full structure elucidation, how complex a molecule is. Assembly Theory has been developed to quantify the complexity of a molecule by finding the shortest pa…
▽ More
Determining the complexity of molecules has important applications from molecular design to understanding the history of the process that led to the formation of the molecule. Currently, it is not possible to experimentally determine, without full structure elucidation, how complex a molecule is. Assembly Theory has been developed to quantify the complexity of a molecule by finding the shortest path to construct the molecule from building blocks, revealing its molecular assembly index (MA). In this study, we present an approach to rapidly and exhaustively calculate the MA of molecules from the spectroscopic measurements. We demonstrate that molecular complexity (MA) can be experimentally estimated using three independent techniques: nuclear magnetic resonance (NMR), tandem mass spectrometry (MS/MS), and infrared spectroscopy (IR), and these give consistent results with good correlations with the theoretically determined values from assembly theory. By identifying and analysing the number of absorbances in IR spectra, carbon resonances in NMR, or molecular fragments in tandem MS, the molecular assembly of an unknown molecule can be reliably estimated from experimental data. This represents the first experimentally quantifiable approach to defining molecular assembly, a reliable metric for complexity, as an intrinsic property of molecules and can also be performed on complex mixtures. This paves the way to use spectroscopic and spectrometric techniques to unambiguously detect alien life in the solar system, and beyond on exoplanets.
△ Less
Submitted 7 November, 2023; v1 submitted 24 February, 2023;
originally announced February 2023.
-
Integral Micromorphic Model for Band Gap in 1D Continuum
Authors:
Milan Jirásek,
Martin Horák,
Michal Šmejkal
Abstract:
The design of band-gap metamaterials, i.e., metamaterials with the capability to inhibit wave propagation of a specific frequency range, has numerous potential engineering applications, such as acoustic filters and vibration isolation control. In order to describe the behavior of such materials, a novel integral micromorphic elastic continuum is introduced, and its ability to describe band gaps is…
▽ More
The design of band-gap metamaterials, i.e., metamaterials with the capability to inhibit wave propagation of a specific frequency range, has numerous potential engineering applications, such as acoustic filters and vibration isolation control. In order to describe the behavior of such materials, a novel integral micromorphic elastic continuum is introduced, and its ability to describe band gaps is studied in the one-dimensional setting. The nonlocal formulation is based on a modification of two terms in the expression for potential energy density. The corresponding dispersion equation is derived and converted to a dimensionless format, so that the effect of individual parameters can be described in the most efficient way. The results indicate that both suggested nonlocal modifications play an important role. The original local micromorphic model reproduces a band gap only in the special, somewhat artificial case, when the stiffness coefficient associated with the gradient of the micromorphic variable vanishes. On the other hand, the nonlocal formulation can provide band gaps even for nonzero values of this coefficient, provided that the penalty coefficient that enforces coupling between the micromorphic variable and nonlocal strain is sufficiently high and the micromorphic stiffness is sufficiently low.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Effect of Creep on Corrosion-Induced Cracking
Authors:
Ismail Aldellaa,
Petr Havlásek,
Milan Jirásek,
Peter Grassl
Abstract:
For corrosion-induced cracking in reinforced concrete, naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding concrete is generated to induce cracking in the concrete cover. To speed up the process, corrosion tests with impressed currents have been developed in which the…
▽ More
For corrosion-induced cracking in reinforced concrete, naturally occurring corrosion rates are so low that rust accumulates often over tens of years near the surface of the reinforcement bars before sufficient pressure in the surrounding concrete is generated to induce cracking in the concrete cover. To speed up the process, corrosion tests with impressed currents have been developed in which the corrosion rate is controlled to be so high that cracking of the concrete cover occurs within a few days. Extrapolating the results of these accelerated tests to those of naturally occurring corrosion requires an understanding of the influence of long-term creep deformations of concrete on the corrosion-induced cracking process. In mathematical models in the literature, creep deformations are often ignored for accelerated but considered for natural corrosion rates in the form of an effective modulus. Here, three numerical models of increasing complexity are proposed with the aim to investigate the effect of creep on corrosion-induced cracking. The simplest approach is based on an uncracked axis-symmetric thick-walled cylinder combined with a plastic limit on the radial pressure-induced by the accumulation of rust. The model with intermediate complexity comprises a thick-walled cylinder model divided into an inner cracked and an outer uncracked layer. The most comprehensive model consists of a thick-walled cylinder discretised by a three-dimensional lattice approach. Basic creep is predicted in all three approaches by means of the B3 model developed by Bažant and co-workers. Time dependence of strength of concrete is modelled using fib Model Code expressions. It is shown that for the comprehensive lattice model, creep has limited influence on critical corrosion penetration, which indicates that the dependence of the critical corrosion penetration on corrosion rate must have other sources.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Efficient formulation of a two-noded geometrically exact curved beam element
Authors:
Martin Horák,
Emma La Malfa Ribolla,
Milan Jirásek
Abstract:
The paper extends the formulation of a 2D geometrically exact beam element proposed in our previous paper [1] to curved elastic beams. This formulation is based on equilibrium equations in their integrated form, combined with the kinematic relations and sectional equations that link the internal forces to sectional deformation variables. The resulting first-order differential equations are approxi…
▽ More
The paper extends the formulation of a 2D geometrically exact beam element proposed in our previous paper [1] to curved elastic beams. This formulation is based on equilibrium equations in their integrated form, combined with the kinematic relations and sectional equations that link the internal forces to sectional deformation variables. The resulting first-order differential equations are approximated by the finite difference scheme and the boundary value problem is converted to an initial value problem using the shooting method. The paper develops the theoretical framework based on the Navier-Bernoulli hypothesis, with a possible extension to shear-flexible beams. Numerical procedures for the evaluation of equivalent nodal forces and of the element tangent stiffness are presented in detail. Unlike standard finite element formulations, the present approach can increase accuracy by refining the integration scheme on the element level while the number of global degrees of freedom is kept constant. The efficiency and accuracy of the developed scheme are documented by seven examples that cover circular and parabolic arches, a spiral-shaped beam, and a spring-like beam with a zig-zag centerline. The proposed formulation does not exhibit any locking. No excessive stiffness is observed for coarse computational grids and the distribution of internal forces is not polluted by any oscillations. It is also shown that a cross effect in the relations between internal forces and deformation variables arises, i.e., the bending moment affects axial stretching and the normal force affects the curvature. This coupling is theoretically explained in the appendix.
△ Less
Submitted 5 October, 2022; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Efficient formulation of a geometrically nonlinear beam element
Authors:
Milan Jirásek,
Emma La Malfa Ribolla,
Martin Horák
Abstract:
The paper presents a two-dimensional geometrically nonlinear formulation of a beam element that can accommodate arbitrarily large rotations of cross sections. The formulation is based on the integrated form of equilibrium equations, which are combined with the kinematic equations and generalized material equations, leading to a set of three first-order differential equations. These equations are t…
▽ More
The paper presents a two-dimensional geometrically nonlinear formulation of a beam element that can accommodate arbitrarily large rotations of cross sections. The formulation is based on the integrated form of equilibrium equations, which are combined with the kinematic equations and generalized material equations, leading to a set of three first-order differential equations. These equations are then discretized by finite differences and the boundary value problem is converted into an initial value problem using a technique inspired by the shooting method. Accuracy of the numerical approximation is conveniently increased by refining the integration scheme on the element level while the number of global degrees of freedom is kept constant, which leads to high computational efficiency. The element has been implemented into an open-source finite element code. Numerical examples show a favorable comparison with standard beam elements formulated in the finite-strain framework and with analytical solutions.
△ Less
Submitted 19 April, 2021;
originally announced April 2021.
-
Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere
Authors:
Peter Grassl,
Milan Jirásek,
Domenico Gallipoli
Abstract:
The initiation of fluid-induced fracture in formations of permeable geomaterials subjected to quasi-stationary flow processes (drained response) can be strongly affected by Biot's coefficient and the size of the formation. The aim of this paper is to analyse the influence of these parameters on the initial fracture process of a thick-walled hollow permeable sphere subjected to fluid injection in t…
▽ More
The initiation of fluid-induced fracture in formations of permeable geomaterials subjected to quasi-stationary flow processes (drained response) can be strongly affected by Biot's coefficient and the size of the formation. The aim of this paper is to analyse the influence of these parameters on the initial fracture process of a thick-walled hollow permeable sphere subjected to fluid injection in the hole. Assuming that fracture patterns are distributed uniformly during the hardening stage of the fracture initiation process, the coupled fluid-solid problem is described by a nonlinear ordinary differential equation, which is solved numerically by means of finite differences combined with shooting and Newton methods. The finite difference code has also been validated in the elastic range, i.e., before initiation of fracture, against an original closed-form analytical solution of the above differential equation. The results show that the nominal strength of the sphere increases with increasing Biot's coefficient and decreases with increasing size.
△ Less
Submitted 3 April, 2019; v1 submitted 26 July, 2018;
originally announced July 2018.
-
Quasicontinuum Method Extended to Irregular Lattices
Authors:
Karel Mikeš,
Milan Jirásek
Abstract:
The quasicontinuum (QC) method, originally proposed by Tadmor, Ortiz and Phillips in 1996, is a computational technique that can efficiently handle regular atomistic lattices by combining continuum and atomistic approaches. In the present work, the QC method is extended to irregular systems of particles that represent a heterogeneous material. The paper introduces five QC-inspired approaches that…
▽ More
The quasicontinuum (QC) method, originally proposed by Tadmor, Ortiz and Phillips in 1996, is a computational technique that can efficiently handle regular atomistic lattices by combining continuum and atomistic approaches. In the present work, the QC method is extended to irregular systems of particles that represent a heterogeneous material. The paper introduces five QC-inspired approaches that approximate a discrete model consisting of particles connected by elastic links with axial interactions. Accuracy is first checked on simple examples in two and three spatial dimensions. Computational efficiency is then assessed by performing three-dimensional simulations of an L-shaped specimen with elastic-brittle links. It is shown that the QC-inspired approaches substantially reduce the computational cost and lead to macroscopic crack trajectories and global load-displacement curves that are very similar to those obtained by a fully resolved particle model.
△ Less
Submitted 26 January, 2017;
originally announced January 2017.
-
Localization Analysis of an Energy-Based Fourth-Order Gradient Plasticity Model
Authors:
Ondřej Rokoš,
Jan Zeman,
Milan Jirásek
Abstract:
The purpose of this paper is to provide analytical and numerical solutions of the formation and evolution of the localized plastic zone in a uniaxially loaded bar with variable cross-sectional area. An energy-based variational approach is employed and the governing equations with appropriate physical boundary conditions, jump conditions, and regularity conditions at evolving elasto-plastic interfa…
▽ More
The purpose of this paper is to provide analytical and numerical solutions of the formation and evolution of the localized plastic zone in a uniaxially loaded bar with variable cross-sectional area. An energy-based variational approach is employed and the governing equations with appropriate physical boundary conditions, jump conditions, and regularity conditions at evolving elasto-plastic interface are derived for a fourth-order explicit gradient plasticity model with linear isotropic softening. Four examples that differ by regularity of the yield stress and stress distributions are presented. Results for the load level, size of the plastic zone, distribution of plastic strain and its spatial derivatives, plastic elongation, and energy balance are constructed and compared to another, previously discussed non-variational gradient formulation.
△ Less
Submitted 27 July, 2015; v1 submitted 27 January, 2015;
originally announced January 2015.
-
Localization Study of a Regularized Variational Damage Model
Authors:
Milan Jirásek,
Jan Zeman
Abstract:
The paper presents a detailed analysis and extended formulation of a rate-independent regularized damage model proposed by Mielke and Roubíček (2006). Localization properties are studied in the context of a simple one-dimensional problem, but the results reveal the fundamental features of the basic model and of its modified versions. The initial bifurcation from a uniform solution is described ana…
▽ More
The paper presents a detailed analysis and extended formulation of a rate-independent regularized damage model proposed by Mielke and Roubíček (2006). Localization properties are studied in the context of a simple one-dimensional problem, but the results reveal the fundamental features of the basic model and of its modified versions. The initial bifurcation from a uniform solution is described analytically while the complete failure process is studied numerically. Modifications of the regularizing term and of the dissipation distance are introduced and their effect on the global response is investigated. It is shown that, with a proper combination of model parameters, a realistic shape of the load-displacement diagram can be achieved and pathological effects such as extremely brittle response or expansion of the damage zone accompanied by stress locking can be eliminated.
△ Less
Submitted 22 May, 2015; v1 submitted 17 December, 2014;
originally announced December 2014.
-
Evaluation of nonlocal approaches for modelling fracture near nonconvex boundaries
Authors:
Peter Grassl,
Dimitrios Xenos,
Milan Jirásek,
Martin Horák
Abstract:
Integral-type nonlocal damage models describe the fracture process zones by regular strain profiles insensitive to the size of finite elements, which is achieved by incorporating weighted spatial averages of certain state variables into the stress-strain equations. However, there is no consensus yet how the influence of boundaries should be taken into account by the averaging procedures. In the pr…
▽ More
Integral-type nonlocal damage models describe the fracture process zones by regular strain profiles insensitive to the size of finite elements, which is achieved by incorporating weighted spatial averages of certain state variables into the stress-strain equations. However, there is no consensus yet how the influence of boundaries should be taken into account by the averaging procedures. In the present study, nonlocal damage models with different averaging procedures are applied to the modelling of fracture in specimens with various boundary types. Firstly, the nonlocal models are calibrated by fitting load-displacement curves and dissipated energy profiles for direct tension to the results of mesoscale analyses performed using a discrete model. These analyses are set up so that the results are independent of boundaries. Then, the models are applied to two-dimensional simulations of three-point bending tests with a sharp notch, a V-type notch, and a smooth boundary without a notch. The performance of the nonlocal approaches in modelling of fracture near nonconvex boundaries is evaluated by comparison of load-displacement curves and dissipated energy profiles along the beam ligament with the results of meso-scale simulations. As an alternative approach, elastoplasticity combined with nonlocal or over-nonlocal damage is also included in the comparative study.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Localization analysis of variationally based gradient plasticity model
Authors:
Milan Jirásek,
Ondřej Rokoš,
Jan Zeman
Abstract:
The paper presents analytical or semi-analytical solutions for the formation and evolution of localized plastic zone in a uniaxially loaded bar with variable cross-sectional area. A variationally based formulation of explicit gradient plasticity with linear softening is used, and the ensuing jump conditions and boundary conditions are discussed. Three cases with different regularity of the stress…
▽ More
The paper presents analytical or semi-analytical solutions for the formation and evolution of localized plastic zone in a uniaxially loaded bar with variable cross-sectional area. A variationally based formulation of explicit gradient plasticity with linear softening is used, and the ensuing jump conditions and boundary conditions are discussed. Three cases with different regularity of the stress distribution are considered, and the problem is converted to a dimensionless form. Relations linking the load level, size of the plastic zone, distribution of plastic strain and plastic elongation of the bar are derived and compared to another, previously analyzed gradient formulation.
△ Less
Submitted 4 June, 2012; v1 submitted 25 February, 2011;
originally announced February 2011.
-
Softening Gradient Plasticity: Analytical Study of Localization under Nonuniform Stress
Authors:
Milan Jirasek,
Jan Zeman,
Jaroslav Vondrejc
Abstract:
Localization of plastic strain induced by softening can be objectively described by a regularized plasticity model that postulates a dependence of the current yield stress on a nonlocal softening variable defined by a differential (gradient) expression. This paper presents analytical solutions of the one-dimensional localization problem under certain special nonuniform stress distributions. The…
▽ More
Localization of plastic strain induced by softening can be objectively described by a regularized plasticity model that postulates a dependence of the current yield stress on a nonlocal softening variable defined by a differential (gradient) expression. This paper presents analytical solutions of the one-dimensional localization problem under certain special nonuniform stress distributions. The one-dimensional problem can be interpreted as describing either a tensile bar with variable cross section, or a beam subjected to a nonuniform bending moment. Explicit as well as implicit gradient formulations are considered. The evolution of the plastic strain profile and the shape of the load-displacement diagram are investigated. It is shown that even if the local constitutive law exhibits softening right from the onset of yielding, the global load-displacement diagram has a hardening part. The interplay between the internal length scales characterizing the material and the geometry is discussed.
△ Less
Submitted 9 July, 2009;
originally announced July 2009.
-
Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension
Authors:
Peter Grassl,
Milan Jirasek
Abstract:
A meso-scale analysis is performed to determine the fracture process zone of concrete subjected to uniaxial tension. The meso-structure of concrete is idealised as stiff aggregates embedded in a soft matrix and separated by weak interfaces. The mechanical response of the matrix, the inclusions and the interface between the matrix and the inclusions is modelled by a discrete lattice approach. The…
▽ More
A meso-scale analysis is performed to determine the fracture process zone of concrete subjected to uniaxial tension. The meso-structure of concrete is idealised as stiff aggregates embedded in a soft matrix and separated by weak interfaces. The mechanical response of the matrix, the inclusions and the interface between the matrix and the inclusions is modelled by a discrete lattice approach. The inelastic response of the lattice elements is described by a damage approach, which corresponds to a continuous reduction of the stiffness of the springs. The fracture process in uniaxial tension is approximated by an analysis of a two-dimensional cell with periodic boundary conditions. The spatial distribution of dissipated energy density at the meso-scale of concrete is determined. The size and shape of the deterministic FPZ is obtained as the average of random meso-scale analyses. Additionally, periodicity of the discretisation is prescribed to avoid influences of the boundaries of the periodic cell on fracture patterns. The results of these analyses are then used to calibrate an integral-type nonlocal model.
△ Less
Submitted 29 January, 2009;
originally announced January 2009.
-
Localization Study of a Non-Local Energetic Damage Model
Authors:
M. Jirasek,
J. Zeman
Abstract:
The contribution presents an analysis of a rate-independent non-local damage model, recently proposed by (Mielke and Roubicek, 2006). An analytical as well as numerical solution of a simple one-dimensional bifurcation problem is performed, demonstrating that, for the elementary localization test, the model is free of pathological features.
The contribution presents an analysis of a rate-independent non-local damage model, recently proposed by (Mielke and Roubicek, 2006). An analytical as well as numerical solution of a simple one-dimensional bifurcation problem is performed, demonstrating that, for the elementary localization test, the model is free of pathological features.
△ Less
Submitted 18 December, 2014; v1 submitted 21 April, 2008;
originally announced April 2008.
-
Measurement of spin-dependent total cross-section difference $Δσ_T$ in neutron-proton scattering at 16 MeV
Authors:
J. Broz,
J. Cerny,
Z. Dolezal,
G. M. Gurevich M. Jirasek,
P. Kubik,
A. A. Lukhanin,
J. Svejda,
I. Wilhelm,
N. S. Borisov,
Yu. M. Kazarinov B. A. Khachaturov,
E. S. Kuzmin,
V. N. Matafonov,
A. B. Neganov,
I. L. Pisarev,
Yu. A. Plis,
Yu. A. Usov,
M. Rotter,
B. Sedlak
Abstract:
A new measurement of $Δσ_T$ for polarized neutrons transmitted through a polarized proton target at 16.2 MeV has been made. A polarized neutron beam was obtained from the $^{3}\rm{H}(d,\vec n)^{4}\rm{He}$ reaction; proton polarization over 90\% was achieved in a frozen spin target of 20 cm$^3$ volume. The measurement yielded the value $Δσ_T=(-126\pm21\pm14)$ mb. The result of a simple phase shif…
▽ More
A new measurement of $Δσ_T$ for polarized neutrons transmitted through a polarized proton target at 16.2 MeV has been made. A polarized neutron beam was obtained from the $^{3}\rm{H}(d,\vec n)^{4}\rm{He}$ reaction; proton polarization over 90\% was achieved in a frozen spin target of 20 cm$^3$ volume. The measurement yielded the value $Δσ_T=(-126\pm21\pm14)$ mb. The result of a simple phase shift analysis for the $^3S_1-^3D_1$ mixing parameter $ε_1$ is presented and compared with the theoretical potential model predictions.
△ Less
Submitted 28 July, 1995;
originally announced July 1995.
