-
Pressure Tuning the Mixture of Eu$^{2+}$ and Eu$^{3+}$ in Eu$_4$Bi$_6$Se$_{13}$
Authors:
Mingyu Xu,
Jose L. Gonzalez Jimenez,
Greeshma C. Jose,
Artittaya Boonkird,
Chengkun Xing,
Chelsea Harrod,
Xinle Li,
Haidong Zhou,
Alyssa Gaiser,
Xianglin Ke,
Wenli Bi,
Mingda Li,
Weiwei Xie
Abstract:
The investigation of crystallographic, electronic, and magnetic characteristics, especially the mixed valences of Eu$^{2+}$ and Eu$^{3+}$ under pressure of a novel europium-based bismuth selenide compound, Eu$_4$Bi$_6$Se$_{13}$, presented. This new compound adopts a monoclinic crystal structure classified under the P$2_1$/m space group (#11). It exhibits distinctive structural features, including…
▽ More
The investigation of crystallographic, electronic, and magnetic characteristics, especially the mixed valences of Eu$^{2+}$ and Eu$^{3+}$ under pressure of a novel europium-based bismuth selenide compound, Eu$_4$Bi$_6$Se$_{13}$, presented. This new compound adopts a monoclinic crystal structure classified under the P$2_1$/m space group (#11). It exhibits distinctive structural features, including substantial Eu-Se coordination numbers, Bi-Se ladders, and linear chains of Eu atoms that propagate along the b-axis. Electronic resistivity assessments indicate that Eu$_{4}$Bi$_{6}$Se$_{13}$ exhibits weak metallic behaviors. Magnetic characterization reveals uniaxial magnetic anisotropy, with a notable spin transition at approximately 1.2 T when the magnetic field is oriented along the b-axis. This behavior, coupled with the specific Eu-Eu interatomic distances and the magnetic saturation observed at low fields, supports the identification of metamagnetic properties attributable to the flip** of europium spins. The Curie-Weiss analysis of the magnetic susceptibility measured both perpendicular and parallel to the b-axis and high-pressure partial fluorescence yield (PFY) results detected by X-ray absorption spectroscopy (XAS) reveal the tendency of the material to enter a mixed valent state where the trivalent state becomes more prominent with the pressure increase or temperature decrease.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Structural investigation of the quasi-one-dimensional topological insulator Bi$_4$I$_4$
Authors:
C. David Hinostroza,
Leandro Rodrigues de Faria,
Gustavo H. Cassemiro,
J. Larrea Jiménez,
Antonio Jefferson da Silva Machado,
Walber H. Brito,
Valentina Martelli
Abstract:
The bismuth-halide Bi$_4$I$_4$ undergoes a structural transition around $T_P\sim 300$K, which separates a high-temperature $β$ phase ($T>T_P$) from a low-temperature $α$ phase ($T<T_P$). $α$ and $β$ phases are suggested to host electronic band structures with distinct topological classifications. Rapid quenching was reported to stabilize a metastable $β$-Bi$_4$I$_4$ at $T<T_P$, making possible a c…
▽ More
The bismuth-halide Bi$_4$I$_4$ undergoes a structural transition around $T_P\sim 300$K, which separates a high-temperature $β$ phase ($T>T_P$) from a low-temperature $α$ phase ($T<T_P$). $α$ and $β$ phases are suggested to host electronic band structures with distinct topological classifications. Rapid quenching was reported to stabilize a metastable $β$-Bi$_4$I$_4$ at $T<T_P$, making possible a comparative study of the physical properties of the two phases in the same low-temperature range. In this work, we present a structural investigation of the Bi$_4$I$_4$ before and after quenching together with electrical resistivity measurements. We found that rapid cooling does not consistently lead to a metastable $β$-Bi$_4$I$_4$, and a quick transition to $α$-Bi$_4$I$_4$ is observed. As a result, the comparison of putative signatures of different topologies attributed to a specific structural phase should be carefully considered. The observed phase instability is accompanied by an increase in iodine vacancies and by a change in the temperature dependence of electrical resistivity, pointing to native defects as a possible origin of our finding. Density functional theory (DFT) calculations support the scenario that iodine vacancies, together with bismuth antisites and interstitials, are among the defects that are more likely to occur in Bi$_4$I$_4$ during the growth.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Emergent Topological Semimetal
Authors:
D. M. Kirschbaum,
L. Chen,
D. A. Zocco,
H. Hu,
F. Mazza,
J. Larrea Jiménez,
A. M. Strydom,
D. Adroja,
X. Yan,
A. Prokofiev,
Q. Si,
S. Paschen
Abstract:
A material's electronic topology, which is generally described via its Bloch states and the associated bandstructure, will be enriched by the presence of interactions. In metallic settings, the interactions are usually treated through the concept of quasiparticles. Using the genuinely quantum critical heavy fermion compound CeRu$_4$Sn$_6$, we investigate what happens if no well-defined quasipartic…
▽ More
A material's electronic topology, which is generally described via its Bloch states and the associated bandstructure, will be enriched by the presence of interactions. In metallic settings, the interactions are usually treated through the concept of quasiparticles. Using the genuinely quantum critical heavy fermion compound CeRu$_4$Sn$_6$, we investigate what happens if no well-defined quasiparticles are present. Surprisingly, we discover a topological semimetal phase that emerges from the material's quantum critical state and exhibits a dome structure as a function of magnetic field and pressure. To understand these results, we study a Weyl-Kondo semimetal model at a Kondo destruction quantum critical point. Indeed, it exhibits features in the spectral function that can define topological crossings beyond the quasiparticle picture. We expect our work to stimulate the search for other emergent topological phases.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Near-critical dark opalescence in out-of-equilibrium SF$_6$
Authors:
Valentina Martelli,
Amaury Anquetil,
Lin Al Atik,
J. Larrea Jiménez,
Alaska Subedi,
Ricardo P. S. M. Lobo,
Kamran Behnia
Abstract:
The first-order phase transition between the liquid and gaseous phases ends at a critical point. Critical opalescence occurs at this singularity. Discovered in 1822, it is known to be driven by diverging fluctuations in the density. During the past two decades, boundaries between the gas-like and liquid-like regimes have been theoretically proposed and experimentally explored. Here, we show that f…
▽ More
The first-order phase transition between the liquid and gaseous phases ends at a critical point. Critical opalescence occurs at this singularity. Discovered in 1822, it is known to be driven by diverging fluctuations in the density. During the past two decades, boundaries between the gas-like and liquid-like regimes have been theoretically proposed and experimentally explored. Here, we show that fast cooling of near-critical sulfur hexafluoride (SF$_6$), in presence of Earth's gravity, favors dark opalescence, where visible photons are not merely scattered, but also absorbed. When the isochore fluid is quenched across the critical point, its optical transmittance drops by more than three orders of magnitude in the whole visible range, a feature which does not occur during slow cooling. We show that transmittance shows a dip at 2eV near the critical point, and the system can host excitons with binding energies ranging from 0.5 to 4 eV. The spinodal decomposition of the liquid-gas mixture, by inducing a periodical modulation of the fluid density, can provide a scenario to explain the emergence of this platform for coupling between light and matter. The possible formation of excitons and polaritons points to the irruption of quantum effects in a quintessentially classical context.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
The Ambrose-Singer Theorem for cohomogeneity one Riemannian manifolds
Authors:
José Luis Carmona Jiménez,
Marco Castrillón López,
José Carlos Díaz-Ramos
Abstract:
We characterize isometric actions when the principal orbits are hypersurfaces by the existence of a linear connection satisfying a set of covariant equations. We use this results to characterize isomorphic cohomogeneity one foliations in terms of these connections and give explicit examples of these objects in the Euclidean space and the real hyperbolic space.
We characterize isometric actions when the principal orbits are hypersurfaces by the existence of a linear connection satisfying a set of covariant equations. We use this results to characterize isomorphic cohomogeneity one foliations in terms of these connections and give explicit examples of these objects in the Euclidean space and the real hyperbolic space.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
Evaluating the Sensitivity of Mortality Attributable to Pollution to Modeling Choices: A Case Study for Colorado
Authors:
Priyanka N. deSouza,
Susan Anenberg,
Neal Fann,
Lisa M. McKenzie,
Elizabeth Chan,
Ananya Roy,
Jose L. Jimenez,
William Raich,
Henry Roman,
Patrick L. Kinney
Abstract:
We evaluated the sensitivity of estimated PM2.5 and NO2 health impacts to varying key input parameters and assumptions including: 1) the spatial scale at which impacts are estimated, 2) using either a single concentration-response function (CRF) or using racial/ethnic group specific CRFs from the same epidemiologic study, 3) assigning exposure to residents based on home, instead of home and work l…
▽ More
We evaluated the sensitivity of estimated PM2.5 and NO2 health impacts to varying key input parameters and assumptions including: 1) the spatial scale at which impacts are estimated, 2) using either a single concentration-response function (CRF) or using racial/ethnic group specific CRFs from the same epidemiologic study, 3) assigning exposure to residents based on home, instead of home and work locations. This analysis was carried out for the state of Colorado. We found that the spatial scale of the analysis influences the magnitude of NO2, but not PM2.5, attributable deaths. Using county-level predictions instead of 1 km2 predictions of NO2 resulted in a lower estimate of mortality attributable to NO2 by ~ 50% for all of Colorado for each year between 2000-2020. Using an all-population CRF instead of racial/ethnic group specific CRFs results in a higher estimate of annual mortality attributable to PM2.5 by a factor 1.3 for the white population and a lower estimate of mortality attributable to PM2.5 by factors of 0.4 and 0.8 for Black and Hispanic residents, respectively. Using racial/ethnic group specific CRFs did not result in a different estimation of NO2 attributable mortality for white residents, but led to lower estimates of mortality by a factor of ~ 0.5 for Black residents, and by a factor of 2.9 for to Hispanic residents. Using NO2 based on home instead of home and workplace locations results in a smaller estimate of annual mortality attributable to NO2 for all of Colorado by ~0.980 each year and 0.997 for PM2.5.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Inelastic neutron scattering investigation of the crystal field excitations of NdCo$_5$
Authors:
F. de Almeida Passos,
G. J. Nilsen,
C. E. Patrick,
M. D. Le,
G. Balakrishnan,
Santosh Kumar,
A. Thamizhavel,
D. R. Cornejo,
J. Larrea Jiménez
Abstract:
We present an inelastic neutron scattering study of the crystal electric field levels in the intermetallic ferrimagnets RECo$_{5}$ (RE = Nd and Y). In NdCo$_{5}$, measurements at $5~$K reveal two levels at approximately 28.9 and 52.9 meV. Crystal field calculations including the exchange field $B_{\textrm{exc}}$ from the Co sites account for both of these, as well as the spectrum at temperatures a…
▽ More
We present an inelastic neutron scattering study of the crystal electric field levels in the intermetallic ferrimagnets RECo$_{5}$ (RE = Nd and Y). In NdCo$_{5}$, measurements at $5~$K reveal two levels at approximately 28.9 and 52.9 meV. Crystal field calculations including the exchange field $B_{\textrm{exc}}$ from the Co sites account for both of these, as well as the spectrum at temperatures above the spin-reorientation transition at $\sim 280$~K. In particular, it is found that both a large hexagonal crystal field parameter $A_{6}^6\langle r^6 \rangle$ and $B_{\textrm{exc}}$ are required to reproduce the data, with the latter having a much larger value than that deduced from previous computational and experimental studies. Our study sheds light on the delicate interplay of terms in the rare-earth Hamiltonian of RECo$_5$ systems, and is therefore expected to stimulate further experimental and computational work on the broader family of rare-earth permanent magnets.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Visualizing hypothesis tests in survival analysis under anticipated delayed effects
Authors:
José L. Jiménez,
Isobel Barrott,
Francesca Gasperoni,
Dominic Magirr
Abstract:
What can be considered an appropriate statistical method for the primary analysis of a randomized clinical trial (RCT) with a time-to-event endpoint when we anticipate non-proportional hazards owing to a delayed effect? This question has been the subject of much recent debate. The standard approach is a log-rank test and/or a Cox proportional hazards model. Alternative methods have been explored i…
▽ More
What can be considered an appropriate statistical method for the primary analysis of a randomized clinical trial (RCT) with a time-to-event endpoint when we anticipate non-proportional hazards owing to a delayed effect? This question has been the subject of much recent debate. The standard approach is a log-rank test and/or a Cox proportional hazards model. Alternative methods have been explored in the statistical literature, such as weighted log-rank tests and tests based on the Restricted Mean Survival Time (RMST). While weighted log-rank tests can achieve high power compared to the standard log-rank test, some choices of weights may lead to type-I error inflation under particular conditions. In addition, they are not linked to an unambiguous estimand. Arguably, therefore, they are difficult to intepret. Test statistics based on the RMST, on the other hand, allow one to investigate the average difference between two survival curves up to a pre-specified time point $τ$ -- an unambiguous estimand. However, by emphasizing differences prior to $τ$, such test statistics may not fully capture the benefit of a new treatment in terms of long-term survival. In this article, we introduce a graphical approach for direct comparison of weighted log-rank tests and tests based on the RMST. This new perspective allows a more informed choice of the analysis method, going beyond power and type I error comparison.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
A Bayesian design for dual-agent dose optimization with targeted therapies
Authors:
José L. Jiménez,
Mourad Tighiouart
Abstract:
In this article, we propose a phase I-II design in two stages for the combination of molecularly targeted therapies. The design is motivated by a published case study that combines a MEK and a PIK3CA inhibitors; a setting in which higher dose levels do not necessarily translate into higher efficacy responses. The goal is therefore to identify dose combination(s) with a prespecified desirable risk-…
▽ More
In this article, we propose a phase I-II design in two stages for the combination of molecularly targeted therapies. The design is motivated by a published case study that combines a MEK and a PIK3CA inhibitors; a setting in which higher dose levels do not necessarily translate into higher efficacy responses. The goal is therefore to identify dose combination(s) with a prespecified desirable risk-benefit trade-off. We propose a flexible cubic spline to model the marginal distribution of the efficacy response. In stage I, patients are allocated following the escalation with overdose control (EWOC) principle whereas, in stage II, we adaptively randomize patients to the available experimental dose combinations based on the continuously updated model parameters. A simulation study is presented to assess the design's performance under different scenarios, as well as to evaluate its sensitivity to the sample size and to model misspecification. Compared to a recently published dose finding algorithm for biologic drugs, our design is safer and more efficient at identifying optimal dose combinations.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Investigation of role of antisite disorder in the pristine cage compound FeGa$_3$
Authors:
C. Kaufmann Ribeiro,
L. Mello,
V. Martelli,
D. Cornejo,
M. B. Silva Neto,
E. Fogh,
H. M. Rønnow,
J. Larrea Jiménez
Abstract:
The role of controlled disorder in the strong correlated narrow gap semiconductor candidate FeGa$_3$ has been investigated. Polycrystalline samples were synthesized by the combination of arc-melting furnace and successive annealing processes. Deviations of the occupation number of Fe and Ga sites from those expected in the pristine compound were quantified with X-ray analysis. Besides that, electr…
▽ More
The role of controlled disorder in the strong correlated narrow gap semiconductor candidate FeGa$_3$ has been investigated. Polycrystalline samples were synthesized by the combination of arc-melting furnace and successive annealing processes. Deviations of the occupation number of Fe and Ga sites from those expected in the pristine compound were quantified with X-ray analysis. Besides that, electrical transport and magnetization measurements reveal that hierarchy in Fe and Ga site disorder tunes the ground state of FeGa$_3$ from paramagnetic semiconducting to a magnetic metal. These findings are discussed within the framework of Anderson metal-insulator transitions and spin fluctuations.
△ Less
Submitted 25 March, 2023; v1 submitted 18 August, 2022;
originally announced August 2022.
-
Magnetic, electronic, and structural investigation of the strongly correlated Y$_{1-x}$Sm$_x$Co$_5$ system
Authors:
Fernando de Almeida Passos,
Daniel Cornejo,
Márcia Fantini,
Gøran J. Nilsen,
Valentina Martelli,
Julio Larrea Jiménez
Abstract:
SmCo$_5$ and YCo$_5$ are isostructural compounds both showing large magnetocrystalline anisotropy, where the former originates mainly from the crystal-electric field and magnetic interactions. We investigate the contribution of both interactions by partially substituting Y by Sm in as-cast polycrystalline Y$_{1-x}$Sm$_{x}$Co$_5$ (with $x$=0, 0.1, 0.2, 0.3, and 0.4) and measuring their structural,…
▽ More
SmCo$_5$ and YCo$_5$ are isostructural compounds both showing large magnetocrystalline anisotropy, where the former originates mainly from the crystal-electric field and magnetic interactions. We investigate the contribution of both interactions by partially substituting Y by Sm in as-cast polycrystalline Y$_{1-x}$Sm$_{x}$Co$_5$ (with $x$=0, 0.1, 0.2, 0.3, and 0.4) and measuring their structural, magnetic, and electrical properties through X-ray diffraction, magnetization, and electrical transport measurements. Our results suggest an interplay between microstructure strain in as-cast samples and the electronic and magnetic interactions.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
Modeling synergism in early phase cancer trials with drug combination with continuous dose levels: is there an added value?
Authors:
Mourad Tighiouart,
José L. Jiménez,
Marcio A. Diniz,
André Rogatko
Abstract:
In parametric Bayesian designs of early phase cancer clinical trials with drug combinations exploring a discrete set of partially ordered doses, several authors claimed that there is no added value in including an interaction term to model synergism between the two drugs. In this paper, we investigate these claims in the setting of continuous dose levels of the two agents. Parametric models will b…
▽ More
In parametric Bayesian designs of early phase cancer clinical trials with drug combinations exploring a discrete set of partially ordered doses, several authors claimed that there is no added value in including an interaction term to model synergism between the two drugs. In this paper, we investigate these claims in the setting of continuous dose levels of the two agents. Parametric models will be used to describe the relationship between the doses of the two agents and the probability of dose limiting toxicity and efficacy. Trial design proceeds by treating cohorts of two patients simultaneously receiving different dose combinations and response adaptive randomization. We compare trial safety and efficiency of the estimated maximum tolerated dose (MTD) curve between models that include an interaction term with models without the synergism parameter with extensive simulations. Under a selected class of dose-toxicity models and dose escalation algorithm, we found that not including an interaction term in the model can compromise the safety of the trial and reduce the pointwise reliability of the estimated MTD curve.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
A GPU-accelerated computational fluid dynamics solver for assessing shear-driven indoor airflow and virus transmission by scale-resolved simulations
Authors:
M. Korhonen,
A. Laitinen,
G. E. Isitman,
J. L. Jimenez,
V. Vuorinen
Abstract:
We explore the applicability of MATLAB for 3D computational fluid dynamics (CFD) of shear-driven indoor airflows. A new scale-resolving, large-eddy simulation (LES) solver titled DNSLABIB is proposed for MATLAB utilizing graphics processing units (GPUs). The solver is first validated against another CFD software (OpenFOAM). Next, we demonstrate the solver performance in three isothermal indoor ven…
▽ More
We explore the applicability of MATLAB for 3D computational fluid dynamics (CFD) of shear-driven indoor airflows. A new scale-resolving, large-eddy simulation (LES) solver titled DNSLABIB is proposed for MATLAB utilizing graphics processing units (GPUs). The solver is first validated against another CFD software (OpenFOAM). Next, we demonstrate the solver performance in three isothermal indoor ventilation configurations and the results are discussed in the context of airborne transmission of COVID-19. Ventilation in these cases is studied at both low (0.1 m/s) and high (1 m/s) airflow rates corresponding to $Re=5000$ and $Re=50000$. An analysis of the indoor CO$_2$ concentration is carried out as the room is emptied from stale, high CO$_2$ content air. We estimate the air changes per hour (ACH) values for three different room geometries and show that the numerical estimates from 3D CFD simulations may differ by 80-150 % ($Re=50000$) and 75-140 % ($Re=5000$) from the theoretical ACH value based on the perfect mixing assumption. Additionally, the analysis of the CO$_2$ probability distributions (PDFs) indicates a relatively non-uniform distribution of fresh air indoors. Finally, utilizing a time-dependent Wells-Riley analysis, an example is provided on the growth of the cumulative infection risk being reduced rapidly after the ventilation is started. The average infection risk is shown to reduce by a factor of 2 for lower ventilation rates (ACH=3.4-6.3) and 10 for the higher ventilation rates (ACH=37-64). The results indicate a high potential for DNSLABIB in various future developments on airflow prediction.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
Stratified modestly-weighted log-rank tests in settings with an anticipated delayed separation of survival curves
Authors:
Dominic Magirr,
José L. Jiménez
Abstract:
Delayed separation of survival curves is a common occurrence in confirmatory studies in immuno-oncology. Many novel statistical methods that aim to efficiently capture potential long-term survival improvements have been proposed in recent years. However, the vast majority do not consider stratification, which is a major limitation considering that most (if not all) large confirmatory studies curre…
▽ More
Delayed separation of survival curves is a common occurrence in confirmatory studies in immuno-oncology. Many novel statistical methods that aim to efficiently capture potential long-term survival improvements have been proposed in recent years. However, the vast majority do not consider stratification, which is a major limitation considering that most (if not all) large confirmatory studies currently employ a stratified primary analysis. In this article, we combine recently proposed weighted log-rank tests that have been designed to work well under a delayed separation of survival curves, with stratification by a baseline variable. The aim is to increase the efficiency of the test when the stratifying variable is highly prognostic for survival. As there are many potential ways to combine the two techniques, we compare several possibilities in an extensive simulation study. We also apply the techniques retrospectively to two recent randomized clinical trials.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
The homogeneous geometries of complex hyperbolic space
Authors:
José Luis Carmona Jiménez,
Marco Castrillón López
Abstract:
We describe the holonomy algebras of all canonical connections and their action on complex hyperbolic spaces $\mathbb{C}\mathrm{H}(n)$ in all dimensions ($n\in\mathbb{N}$). This thorough investigation yields a formula for all Kahler homogeneous structures on complex hyperbolic spaces. Finally, we have related the belonging of the homogeneous structures to the different Tricerri and Vanhecke's (or…
▽ More
We describe the holonomy algebras of all canonical connections and their action on complex hyperbolic spaces $\mathbb{C}\mathrm{H}(n)$ in all dimensions ($n\in\mathbb{N}$). This thorough investigation yields a formula for all Kahler homogeneous structures on complex hyperbolic spaces. Finally, we have related the belonging of the homogeneous structures to the different Tricerri and Vanhecke's (or Abbena and Garbiero's) orthogonal and irreducible $\mathrm{U}(n)$-submodules with concrete and determined expressions of the holonomy.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Combining cytotoxic agents with continuous dose levels in seamless phase I-II clinical trials
Authors:
José L. Jiménez,
Mourad Tighiouart
Abstract:
Phase I-II cancer clinical trial designs are intended to accelerate drug development. In cases where efficacy cannot be ascertained in a short period of time, it is common to divide the study in two stages: i) a first stage in which dose is escalated based only on toxicity data and we look for the maximum tolerated dose (MTD) set and ii) a second stage in which we search for the most efficacious d…
▽ More
Phase I-II cancer clinical trial designs are intended to accelerate drug development. In cases where efficacy cannot be ascertained in a short period of time, it is common to divide the study in two stages: i) a first stage in which dose is escalated based only on toxicity data and we look for the maximum tolerated dose (MTD) set and ii) a second stage in which we search for the most efficacious dose within the MTD set. Current available approaches in the area of continuous dose levels involve fixing the MTD after stage I and discarding all collected stage I efficacy data. However, this methodology is clearly inefficient when there is a unique patient population present across stages. In this article, we propose a two-stage design for the combination of two cytotoxic agents assuming a single patient population across the entire study. In stage I, conditional escalation with overdose control (EWOC) is used to allocate successive cohorts of patients. In stage II, we employ an adaptive randomization approach to allocate patients to drug combinations along the estimated MTD curve, which is constantly updated. The proposed methodology is assessed with extensive simulations in the context of a real case study.
△ Less
Submitted 10 December, 2022; v1 submitted 29 September, 2021;
originally announced September 2021.
-
A Bayesian adaptive design for dual-agent phase I-II oncology trials integrating efficacy data across stages
Authors:
José L. Jiménez,
Haiyan Zheng
Abstract:
Combination of several anti-cancer treatments has typically been presumed to have enhanced drug activity. Motivated by a real clinical trial, this paper considers phase I-II dose finding designs for dual-agent combinations, where one main objective is to characterize both the toxicity and efficacy profiles. We propose a two-stage Bayesian adaptive design that accommodates a change of patient popul…
▽ More
Combination of several anti-cancer treatments has typically been presumed to have enhanced drug activity. Motivated by a real clinical trial, this paper considers phase I-II dose finding designs for dual-agent combinations, where one main objective is to characterize both the toxicity and efficacy profiles. We propose a two-stage Bayesian adaptive design that accommodates a change of patient population in-between. In stage I, we estimate a maximum tolerated dose combination using the escalation with overdose control (EWOC) principle. This is followed by a stage II, conducted in a new yet relevant patient population, to find the most efficacious dose combination. We implement a robust Bayesian hierarchical random-effects model to allow sharing of information on the efficacy across stages, assuming that the related parameters are either exchangeable or nonexchangeable. Under the assumption of exchangeability, a random-effects distribution is specified for the main effects parameters to capture uncertainty about the between-stage differences. The inclusion of nonexchangeability assumption further enables that the stage-specific efficacy parameters have their own priors. The proposed methodology is assessed with an extensive simulation study. Our results suggest a general improvement of the operating characteristics for the efficacy assessment, under a conservative assumption about the exchangeability of the parameters \textit{a priori}
△ Less
Submitted 8 May, 2023; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Thermal diffusivity and its lower bound in orthorhombic SnSe
Authors:
Valentina Martelli,
Fabio Abud,
Julio Larrea Jiménez,
Elisa Baggio-Saitovich,
Li-Dong Zhao,
Kamran Behnia
Abstract:
The orthorhombic monochalcogenide SnSe has attracted much attention in recent years as a promising high-temperature thermoelectric material. We present a study of its thermal conductivity and specific heat of SnSe between 2~K and 300~K and quantify its anisotropic thermal diffusivity, $D$. For both crystallographic orientations, thermal diffusivity remains above the recently identified Planckian l…
▽ More
The orthorhombic monochalcogenide SnSe has attracted much attention in recent years as a promising high-temperature thermoelectric material. We present a study of its thermal conductivity and specific heat of SnSe between 2~K and 300~K and quantify its anisotropic thermal diffusivity, $D$. For both crystallographic orientations, thermal diffusivity remains above the recently identified Planckian limit ($D > v_s^2 τ_P$, where $v_s$ is the sound velocity and $τ_P= \hbar/k_BT$) and its anisotropy in $D$ is set by the anisotropy of $v_s$. Comparison with cubic members of the IV-VI family leads to a consistent picture, where the diffusivity in all members of the family is set by the product of v$_s$, $τ_P$ and the 'melting' velocity derived from the melting temperature.
△ Less
Submitted 15 July, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
Deep Learning for fully automatic detection, segmentation, and Gleason Grade estimation of prostate cancer in multiparametric Magnetic Resonance Images
Authors:
Oscar J. Pellicer-Valero,
José L. Marenco Jiménez,
Victor Gonzalez-Perez,
Juan Luis Casanova Ramón-Borja,
Isabel Martín García,
María Barrios Benito,
Paula Pelechano Gómez,
José Rubio-Briones,
María José Rupérez,
José D. Martín-Guerrero
Abstract:
The emergence of multi-parametric magnetic resonance imaging (mpMRI) has had a profound impact on the diagnosis of prostate cancers (PCa), which is the most prevalent malignancy in males in the western world, enabling a better selection of patients for confirmation biopsy. However, analyzing these images is complex even for experts, hence opening an opportunity for computer-aided diagnosis systems…
▽ More
The emergence of multi-parametric magnetic resonance imaging (mpMRI) has had a profound impact on the diagnosis of prostate cancers (PCa), which is the most prevalent malignancy in males in the western world, enabling a better selection of patients for confirmation biopsy. However, analyzing these images is complex even for experts, hence opening an opportunity for computer-aided diagnosis systems to seize. This paper proposes a fully automatic system based on Deep Learning that takes a prostate mpMRI from a PCa-suspect patient and, by leveraging the Retina U-Net detection framework, locates PCa lesions, segments them, and predicts their most likely Gleason grade group (GGG). It uses 490 mpMRIs for training/validation, and 75 patients for testing from two different datasets: ProstateX and IVO (Valencia Oncology Institute Foundation). In the test set, it achieves an excellent lesion-level AUC/sensitivity/specificity for the GGG$\geq$2 significance criterion of 0.96/1.00/0.79 for the ProstateX dataset, and 0.95/1.00/0.80 for the IVO dataset. Evaluated at a patient level, the results are 0.87/1.00/0.375 in ProstateX, and 0.91/1.00/0.762 in IVO. Furthermore, on the online ProstateX grand challenge, the model obtained an AUC of 0.85 (0.87 when trained only on the ProstateX data, tying up with the original winner of the challenge). For expert comparison, IVO radiologist's PI-RADS 4 sensitivity/specificity were 0.88/0.56 at a lesion level, and 0.85/0.58 at a patient level. Additional subsystems for automatic prostate zonal segmentation and mpMRI non-rigid sequence registration were also employed to produce the final fully automated system. The code for the ProstateX-trained system has been made openly available at https://github.com/OscarPellicer/prostate_lesion_detection. We hope that this will represent a landmark for future research to use, compare and improve upon.
△ Less
Submitted 2 February, 2022; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Design and Analysis of group-sequential clinical trials based on a modestly-weighted log-rank test in anticipation of a delayed separation of survival curves: A practical guidance
Authors:
Dominic Magirr,
José L. Jiménez
Abstract:
A common feature of many recent trials evaluating the effects of immunotherapy on survival is that non-proportional hazards can be anticipated at the design stage. This raises the possibility to use a statistical method tailored towards testing the purported long-term benefit, rather than applying the more standard log-rank test and/or Cox model. Many such proposals have been made in recent years,…
▽ More
A common feature of many recent trials evaluating the effects of immunotherapy on survival is that non-proportional hazards can be anticipated at the design stage. This raises the possibility to use a statistical method tailored towards testing the purported long-term benefit, rather than applying the more standard log-rank test and/or Cox model. Many such proposals have been made in recent years, but there remains a lack of practical guidance on implementation, particularly in the context of group-sequential designs. In this article, we aim to fill this gap. We discuss how the POPLAR trial, which compared immunotherapy versus chemotherapy in non-small-cell lung cancer, might have been re-designed to be more robust to the presence of a delayed effect. We then provide step-by-step instructions on how to analyse a hypothetical realisation of the trial, based on this new design. Basic theory on weighted log-rank tests and group-sequential methods is covered, and an accompanying R package (including vignette) is provided.
△ Less
Submitted 26 August, 2021; v1 submitted 10 February, 2021;
originally announced February 2021.
-
A quantum magnetic analogue to the critical point of water
Authors:
J. Larrea Jiménez,
S. P. G. Crone,
E. Fogh,
M. E. Zayed,
R. Lortz,
E. Pomjakushina,
K. Conder,
A. M. Läuchli,
L. Weber,
S. Wessel,
A. Honecker,
B. Normand,
Ch. Rüegg,
P. Corboz,
H. M. Rønnow,
F. Mila
Abstract:
At the familiar liquid-gas phase transition in water, the density jumps discontinuously at atmospheric pressure, but the line of these first-order transitions defined by increasing pressures terminates at the critical point, a concept ubiquitous in statistical thermodynamics. In correlated quantum materials, a critical point was predicted and measured terminating the line of Mott metal-insulator t…
▽ More
At the familiar liquid-gas phase transition in water, the density jumps discontinuously at atmospheric pressure, but the line of these first-order transitions defined by increasing pressures terminates at the critical point, a concept ubiquitous in statistical thermodynamics. In correlated quantum materials, a critical point was predicted and measured terminating the line of Mott metal-insulator transitions, which are also first-order with a discontinuous charge density. In quantum spin systems, continuous quantum phase transitions (QPTs) have been investigated extensively, but discontinuous QPTs have received less attention. The frustrated quantum antiferromagnet SrCu$_2$(BO$_3$)$_2$ constitutes a near-exact realization of the paradigmatic Shastry-Sutherland model and displays exotic phenomena including magnetization plateaux, anomalous thermodynamics and discontinuous QPTs. We demonstrate by high-precision specific-heat measurements under pressure and applied magnetic field that, like water, the pressure-temperature phase diagram of SrCu$_2$(BO$_3$)$_2$ has an Ising critical point terminating a first-order transition line, which separates phases with different densities of magnetic particles (triplets). We achieve a quantitative explanation of our data by detailed numerical calculations using newly-developed finite-temperature tensor-network methods. These results open a new dimension in understanding the thermodynamics of quantum magnetic materials, where the anisotropic spin interactions producing topological properties for spintronic applications drive an increasing focus on first-order QPTs.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
A modified weighted log-rank test for confirmatory trials with a high proportion of treatment switching
Authors:
José L. Jiménez,
Julia Niewczas,
Alexander Bore,
Carl-Fredrik Burman
Abstract:
In confirmatory cancer clinical trials, overall survival (OS) is normally a primary endpoint in the intention-to-treat (ITT) analysis under regulatory standards. After the tumor progresses, it is common that patients allocated to the control group switch to the experimental treatment, or another drug in the same class. Such treatment switching may dilute the relative efficacy of the new drug compa…
▽ More
In confirmatory cancer clinical trials, overall survival (OS) is normally a primary endpoint in the intention-to-treat (ITT) analysis under regulatory standards. After the tumor progresses, it is common that patients allocated to the control group switch to the experimental treatment, or another drug in the same class. Such treatment switching may dilute the relative efficacy of the new drug compared to the control group, leading to lower statistical power. It would be possible to decrease the estimation bias by shortening the follow-up period but this may lead to a loss of information and power. Instead we propose a modified weighted log-rank test (mWLR) that aims at balancing these factors by down-weighting events occurring when many patients have switched treatment.
As the weighting should be pre-specified and the impact of treatment switching is unknown, we predict the hazard ratio function and use it to compute the weights of the mWLR. The method may incorporate information from previous trials regarding the potential hazard ratio function over time.
We are motivated by the RECORD-1 trial of everolimus against placebo in patients with metastatic renal-cell carcinoma where almost 80\% of the patients in the placebo group received everolimus after disease progression. Extensive simulations show that the new test gives considerably higher efficiency than the standard log-rank test in realistic scenarios.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
The Ambrose-Singer Theorem for general homogeneous manifolds with applications to symplectic geometry
Authors:
J. L. Carmona Jimenez,
M. Castrillon Lopez
Abstract:
The main result of this article provides a characterization of reductive homogeneous spaces equipped with some geometric structure (non necessarily pseudo-Riemannian) in terms of the existence of certain connection. The result generalizes the well-known result of Ambrose and Singer for Riemannian homogeneous spaces, as well as its extensions for other geometries found in the literature. The manifo…
▽ More
The main result of this article provides a characterization of reductive homogeneous spaces equipped with some geometric structure (non necessarily pseudo-Riemannian) in terms of the existence of certain connection. The result generalizes the well-known result of Ambrose and Singer for Riemannian homogeneous spaces, as well as its extensions for other geometries found in the literature. The manifold must be connected and simply connected, the connection has to be complete and has to satisfy a set of geometric partial differential equations. If the connection is not complete or the manifold is not simply-connected, the result provides a characterization of reductive locally homogeneous manifolds. Finally, we use these results in the local framework to classify with explicit expressions reductive locally homogeneous almost symplectic, symplectic and Fedosov manifolds.
△ Less
Submitted 19 August, 2021; v1 submitted 17 January, 2020;
originally announced January 2020.
-
Quantifying treatment differences in confirmatory trials under non-proportional hazards
Authors:
José L. Jiménez
Abstract:
Proportional hazards are a common assumption when designing confirmatory clinical trials in oncology. With the emergence of immunotherapy and novel targeted therapies, departure from the proportional hazard assumption is not rare in nowadays clinical research. Under non-proportional hazards, the hazard ratio does not have a straightforward clinical interpretation, and the log-rank test is no longe…
▽ More
Proportional hazards are a common assumption when designing confirmatory clinical trials in oncology. With the emergence of immunotherapy and novel targeted therapies, departure from the proportional hazard assumption is not rare in nowadays clinical research. Under non-proportional hazards, the hazard ratio does not have a straightforward clinical interpretation, and the log-rank test is no longer the most powerful statistical test even though it is still valid. Nevertheless, the log-rank test and the hazard ratio are still the primary analysis tools, and traditional approaches such as sample size increase are still proposed to account for the impact of non-proportional hazards. The weighed log-rank test and the test based on the restricted mean survival time (RMST) are receiving a lot of attention as a potential alternative to the log-rank test. We conduct a simulation study comparing the performance and operating characteristics of the log-rank test, the weighted log-rank test and the test based on the RMST, including a treatment effect estimation, under different non-proportional hazards patterns. Results show that, under non-proportional hazards, the hazard ratio and weighted hazard ratio have no straightforward clinical interpretation whereas the RMST ratio can be interpreted regardless of the proportional hazards assumption. In terms of power, the RMST achieves a similar performance when compared to the log-rank test.
△ Less
Submitted 16 August, 2020; v1 submitted 27 August, 2019;
originally announced August 2019.
-
Effects of Proton Irradiation on 60 GHz CMOS Transceiver Chip for Multi-Gbps Communication in High-Energy Physics Experiments
Authors:
Imran Aziz,
Dragos Dancila,
Sebastian Dittmeier,
Alexandre Siligaris,
Cedric Dehos,
Patrick M. De Lurgio,
Zelimir Djurcic,
Gary Drake,
Jose Luis G. Jimenez,
Leif Gustaffson,
Do-Won Kim,
Elizabeth Locci,
Ulrich Pfeiffer,
Pedro Rodriquez Vazquez,
Dieter Röhrich,
Andre Schöning,
Hans K. Soltveit,
Kjetil Ullaland,
Pierre Vincent,
Shiming Yang,
Richard Brenner
Abstract:
This paper presents the experimental results of $17~MeV$ proton irradiation on a $60~GHz$ low power, half-duplex transceiver (TRX) chip implemented in $65~nm$ CMOS technology. It supports short range point-to-point data rate up to $6~Gbps$ by employing on-off keying (OOK). To investigate the irradiation hardness for high energy physics applications, two TRX chips were irradiated with total ionizin…
▽ More
This paper presents the experimental results of $17~MeV$ proton irradiation on a $60~GHz$ low power, half-duplex transceiver (TRX) chip implemented in $65~nm$ CMOS technology. It supports short range point-to-point data rate up to $6~Gbps$ by employing on-off keying (OOK). To investigate the irradiation hardness for high energy physics applications, two TRX chips were irradiated with total ionizing doses (TID) of $74~kGy$ and $42~kGy$ and fluence of $1.4~\times$10$^{14}~ N_{eq}/cm^2$ and $0.8~\times$10$^{14}~N_{eq}/cm^2$ for RX and TX modes, respectively. The chips were characterized by pre- and post-irradiation analogue voltage measurements on different circuit blocks as well as through the analysis of wireless transmission parameters like bit error rate (BER), eye diagram, jitter etc. Post-irradiation measurements have shown certain reduction in performance but both TRX chips have been found operational through over the air measurements at $5~Gbps$. Moreover, very small shift in the carrier frequency was observed after the irradiation.
△ Less
Submitted 12 June, 2019; v1 submitted 28 October, 2018;
originally announced October 2018.
-
A Bayesian seamless phase I-II trial design with two stages for cancer clinical trials with drug combinations
Authors:
José L. Jiménez,
Sung** Kim,
Mourad Tighiouart
Abstract:
The use of drug combinations in clinical trials is increasingly common during the last years since a more favorable therapeutic response may be obtained by combining drugs. In phase I clinical trials, most of the existing methodology recommends a one unique dose combination as "optimal", which may result in a subsequent failed phase II clinical trial since other dose combinations may present highe…
▽ More
The use of drug combinations in clinical trials is increasingly common during the last years since a more favorable therapeutic response may be obtained by combining drugs. In phase I clinical trials, most of the existing methodology recommends a one unique dose combination as "optimal", which may result in a subsequent failed phase II clinical trial since other dose combinations may present higher treatment efficacy for the same level of toxicity. We are particularly interested in the setting where it is necessary to wait a few cycles of therapy to observe an efficacy outcome and the phase I and II population of patients are different with respect to treatment efficacy. Under these circumstances, it is common practice to implement two-stage designs where a set of maximum tolerated dose combinations is selected in a first stage, and then studied in a second stage for treatment efficacy. In this article we present a new two-stage design for early phase clinical trials with drug combinations. In the first stage, binary toxicity data is used to guide the dose escalation and set the maximum tolerated dose combinations. In the second stage, we take the set of maximum tolerated dose combinations recommended from the first stage, which remains fixed along the entire second stage, and through adaptive randomization, we allocate subsequent cohorts of patients in dose combinations that are likely to have high posterior median time to progression. The methodology is assessed with extensive simulations and exemplified with a real trial.
△ Less
Submitted 14 February, 2020; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Properties of the weighted log-rank test in the design of confirmatory studies with delayed effects
Authors:
Jose L Jimenez,
Viktoriya Stalbovskaya,
Byron Jones
Abstract:
Proportional hazards are a common assumption when designing confirmatory clinical trials in oncology. This assumption not only affects the analysis part but also the sample size calculation. The presence of delayed effects causes a change in the hazard ratio while the trial is ongoing since at the beginning we do not observe any difference between treatment arms and after some unknown time point,…
▽ More
Proportional hazards are a common assumption when designing confirmatory clinical trials in oncology. This assumption not only affects the analysis part but also the sample size calculation. The presence of delayed effects causes a change in the hazard ratio while the trial is ongoing since at the beginning we do not observe any difference between treatment arms and after some unknown time point, the differences between treatment arms will start to appear. Hence, the proportional hazards assumption no longer holds and both sample size calculation and analysis methods to be used should be reconsidered. The weighted log-rank test allows a weighting for early, middle and late differences through the Fleming and Harrington class of weights, and is proven to be more efficient when the proportional hazards assumption does not hold. The Fleming and Harrington class of weights, along with the estimated delay, can be incorporated into the sample size calculation in order to maintain the desired power once the treatment arm differences start to appear. In this article, we explore the impact of delayed effects in group sequential and adaptive group sequential designs, and make an empirical evaluation in terms of power and type-I error rate of the of the weighted log-rank test in a simulated scenario with fixed values of the Fleming and Harrington class of weights. We also give some practical recommendations regarding which methodology should be used in the presence of delayed effects depending on certain characteristics of the trial.
△ Less
Submitted 9 December, 2018; v1 submitted 29 June, 2018;
originally announced June 2018.
-
Thermal transport and phonon hydrodynamics in strontium titanate
Authors:
Valentina Martelli,
Julio Larrea Jiménez,
Mucio Continentino,
Elisa Baggio-Saitovitch,
Kamran Behnia
Abstract:
We present a study of thermal conductivity, $κ$, in undoped and doped strontium titanate in a wide temperature range (2-400 K) and detecting different regimes of heat flow. In undoped SrTiO$_{3}$, $κ$ evolves faster than cubic with temperature below its peak and in a narrow temperature window. Such a behavior, previously observed in a handful of solids, has been attributed to a Poiseuille flow of…
▽ More
We present a study of thermal conductivity, $κ$, in undoped and doped strontium titanate in a wide temperature range (2-400 K) and detecting different regimes of heat flow. In undoped SrTiO$_{3}$, $κ$ evolves faster than cubic with temperature below its peak and in a narrow temperature window. Such a behavior, previously observed in a handful of solids, has been attributed to a Poiseuille flow of phonons, expected to arise when momentum-conserving scattering events outweigh momentum-degrading ones. The effect disappears in presence of dopants. In SrTi$_{1-x}$Nb$_{x}$O$_{3}$, a significant reduction in lattice thermal conductivity starts below the temperature at which the average interdopant distance and the thermal wavelength of acoustic phonons become comparable. In the high-temperature regime, thermal diffusivity becomes proportional to the inverse of temperature, with a prefactor set by sound velocity and Planckian time ($τ_{p}=\frac{\hbar}{k_{B}T}$).
△ Less
Submitted 27 March, 2018; v1 submitted 16 February, 2018;
originally announced February 2018.
-
Cancer phase I trial design using drug combinations when a fraction of dose limiting toxicities is attributable to one or more agents
Authors:
Jose L. Jimenez,
Mourad Tighiouart,
Mauro Gasparini
Abstract:
Drug combination trials are increasingly common nowadays in clinical research. However, very few methods have been developed to consider toxicity attributions in the dose escalation process. We are motivated by a trial in which the clinician is able to identify certain toxicities that can be attributed to one of the agents. We present a Bayesian adaptive design in which toxicity attributions are m…
▽ More
Drug combination trials are increasingly common nowadays in clinical research. However, very few methods have been developed to consider toxicity attributions in the dose escalation process. We are motivated by a trial in which the clinician is able to identify certain toxicities that can be attributed to one of the agents. We present a Bayesian adaptive design in which toxicity attributions are modeled via Copula regression and the maximum tolerated dose (MTD) curve is estimated as a function of model parameters. The dose escalation algorithm uses cohorts of two patients, following the continual reassessment method (CRM) scheme, where at each stage of the trial, we search for the dose of one agent given the current dose of the other agent. The performance of the design is studied by evaluating its operating characteristics when the underlying model is either correctly specified or misspecified. We show that this method can be extended to accommodate discrete dose combinations.
△ Less
Submitted 22 August, 2018; v1 submitted 4 September, 2017;
originally announced September 2017.
-
Observation and control of shock waves in individual nanoplasmas
Authors:
Daniel D. Hickstein,
Franklin Dollar,
Jim A. Gaffney,
Mark E. Foord,
George M. Petrov,
Brett B. Palm,
K. Ellen Keister,
Jennifer L. Ellis,
Chengyuan Ding,
Stephen B. Libby,
Jose L. Jimenez,
Henry C. Kapteyn,
Margaret M. Murnane,
Wei Xiong
Abstract:
In a novel experiment that images the momentum distribution of individual, isolated 100-nm-scale plasmas, we make the first experimental observation of shock waves in nanoplasmas. We demonstrate that the introduction of a heating pulse prior to the main laser pulse increases the intensity of the shock wave, producing a strong burst of quasi-monochromatic ions with an energy spread of less than 15%…
▽ More
In a novel experiment that images the momentum distribution of individual, isolated 100-nm-scale plasmas, we make the first experimental observation of shock waves in nanoplasmas. We demonstrate that the introduction of a heating pulse prior to the main laser pulse increases the intensity of the shock wave, producing a strong burst of quasi-monochromatic ions with an energy spread of less than 15%. Numerical hydrodynamic calculations confirm the appearance of accelerating shock waves, and provide a mechanism for the generation and control of these shock waves. This observation of distinct shock waves in dense plasmas enables the control, study, and exploitation of nanoscale shock phenomena with tabletop-scale lasers.
△ Less
Submitted 31 December, 2013;
originally announced January 2014.
-
Precision measurement of the half-life and the decay branches of 62Ga
Authors:
G. Canchel,
B. Blank,
M. Chartier,
F. Delalee,
P. Dendooven,
C. Dossat,
J. Giovinazzo,
J. Huikari,
A. S. Lalleman,
M. J. Lopez Jimenez,
V. Madec,
J. L. Pedroza,
H. Penttila,
J. C. Thomas
Abstract:
In an experiment performed at the Accelerator Laboratory of the University of Jyvaskyla, the beta-decay half-life of 62Ga has been studied with high precision using the IGISOL technique. A half-life of T1/2 = 116.09(17)ms was measured. Using beta-gamma coincidences, the gamma intensity of the 954keV transition and an upper limit of the beta-decay feeding of the 0+_2 state have been extracted. Th…
▽ More
In an experiment performed at the Accelerator Laboratory of the University of Jyvaskyla, the beta-decay half-life of 62Ga has been studied with high precision using the IGISOL technique. A half-life of T1/2 = 116.09(17)ms was measured. Using beta-gamma coincidences, the gamma intensity of the 954keV transition and an upper limit of the beta-decay feeding of the 0+_2 state have been extracted. The present experimental results are compared to previous measurements and their impact on our understanding of the weak interaction is discussed.
△ Less
Submitted 16 November, 2004;
originally announced November 2004.
-
On the two-proton emission for Fe45 - a new type of radioactivity
Authors:
J. Giovinazzo,
B. Blank,
M. Chartier,
S. Czajkowski,
A. Fleury,
M. J. Lopez Jimenez,
M. S. Pravikoff,
J. -C. Thomas,
F. De Oliveira Santos,
M. Lewitowicz,
V. Maslov,
M. Stanoiu,
R. Grzywacz,
M. Pfutzner,
C. Borcea,
B. A. Brown
Abstract:
In an experiment at the SISSI-LISE3 facility of GANIL, the decay of the proton drip-line nucleus Fe45 has been studied after projectile fragmentation of a Ni58 primary beam at 75 MeV/nucleon im**ing on a natural nickel target. Fragment-implantation events have been correlated with radioactive decay events in a 16x16 pixel silicon strip detector on an event-by-event basis. The decay-energy spec…
▽ More
In an experiment at the SISSI-LISE3 facility of GANIL, the decay of the proton drip-line nucleus Fe45 has been studied after projectile fragmentation of a Ni58 primary beam at 75 MeV/nucleon im**ing on a natural nickel target. Fragment-implantation events have been correlated with radioactive decay events in a 16x16 pixel silicon strip detector on an event-by-event basis. The decay-energy spectrum of Fe45 implants shows a distinct peak at (1.06+/-0.04)MeV with a half-life of T1/2 = (4.7+3.4-1.4)ms. None of the events in this peak is in coincidence with beta particles which were searched for in a detector next to the implantation detector. For a longer correlation interval, daughter decays of the two-proton daughter Cr43 can be observed after Fe45 implantation. The decay energy for Fe45 agrees nicely with several theoretical predictions for two-proton emission. Barrier-penetration calculations slightly favour a di-proton emission picture over an emission of two individual protons and point thus to a He2 emission mode.
△ Less
Submitted 21 May, 2002;
originally announced May 2002.