-
Scanned probe imaging of nanoscale magnetism at cryogenic temperatures with a single-spin quantum sensor
Authors:
Matthew Pelliccione,
Alec Jenkins,
Preeti Ovartchaiyapong,
Christopher Reetz,
Eve Emmanuelidu,
Ni Ni,
Ania C. Bleszynski Jayich
Abstract:
High spatial resolution magnetic imaging has driven important developments in fields ranging from materials science to biology. However, to uncover finer details approaching the nanoscale with greater sensitivity requires the development of a radically new sensor technology. The nitrogen-vacancy (NV) defect in diamond has emerged as a promising candidate for such a sensor based on its atomic size…
▽ More
High spatial resolution magnetic imaging has driven important developments in fields ranging from materials science to biology. However, to uncover finer details approaching the nanoscale with greater sensitivity requires the development of a radically new sensor technology. The nitrogen-vacancy (NV) defect in diamond has emerged as a promising candidate for such a sensor based on its atomic size and quantum-limited sensing capabilities afforded by long spin coherence times. Although the NV center has been successfully implemented as a nanoscale scanning magnetic probe at room temperature, it has remained an outstanding challenge to extend this capability to cryogenic temperatures, where many solid-state systems exhibit non-trivial magnetic order. Here we present NV magnetic imaging down to 6 K with 6 nm spatial resolution and 3 μT/$\sqrt{\mbox{Hz}}$ field sensitivity, first benchmarking the technique with a magnetic hard disk sample, then utilizing the technique to image vortices in the iron pnictide superconductor BaFe$_2$(As$_{0.7}$P$_{0.3}$)$_2$ with $T_c$ = 30 K. The expansion of NV-based magnetic imaging to cryogenic temperatures represents an important advance in state-of-the-art magnetometry, which will enable future studies of heretofore inaccessible nanoscale magnetism in condensed matter systems.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
Deterministic coupling of delta-doped NV centers to a nanobeam photonic crystal cavity
Authors:
Jonathan C. Lee,
David O. Bracher,
Shanying Cui,
Kenichi Ohno,
Claire A. McLellan,
Xingyu Zhang,
Paolo Andrich,
Benjamin Aleman,
Kasey J. Russell,
Andrew P. Magyar,
Igor Aharonovich,
Ania Bleszynski Jayich,
David Awschalom,
Evelyn L. Hu
Abstract:
The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement o…
▽ More
The negatively-charged nitrogen vacancy center (NV) in diamond has generated significant interest as a platform for quantum information processing and sensing in the solid state. For most applications, high quality optical cavities are required to enhance the NV zero-phonon line (ZPL) emission. An outstanding challenge in maximizing the degree of NV-cavity coupling is the deterministic placement of NVs within the cavity. Here, we report photonic crystal nanobeam cavities coupled to NVs incorporated by a delta-do** technique that allows nanometer-scale vertical positioning of the emitters. We demonstrate cavities with Q up to ~24,000 and mode volume V ~ $0.47(λ/n)^{3}$ as well as resonant enhancement of the ZPL of an NV ensemble with Purcell factor of ~20. Our fabrication technique provides a first step towards deterministic NV-cavity coupling using spatial control of the emitters.
△ Less
Submitted 3 November, 2014;
originally announced November 2014.
-
Two-dimensional nanoscale imaging of gadolinium spins via scanning probe relaxometry with a single spin in diamond
Authors:
Matthew Pelliccione,
Bryan A. Myers,
Laetitia Pascal,
Ananda Das,
Ania C. Bleszynski Jayich
Abstract:
Spin-labeling of molecules with paramagnetic ions is an important approach for determining molecular structure, however current ensemble techniques lack the sensitivity to detect few isolated spins. In this Letter, we demonstrate two-dimensional nanoscale imaging of paramagnetic gadolinium compounds using scanning relaxometry of a single nitrogen vacancy (NV) center in diamond. Gadopentetate dimeg…
▽ More
Spin-labeling of molecules with paramagnetic ions is an important approach for determining molecular structure, however current ensemble techniques lack the sensitivity to detect few isolated spins. In this Letter, we demonstrate two-dimensional nanoscale imaging of paramagnetic gadolinium compounds using scanning relaxometry of a single nitrogen vacancy (NV) center in diamond. Gadopentetate dimeglumine attached to an atomic force microscope tip is controllably interacted with and detected by the NV center, by virtue of the fact that the NV exhibits fast relaxation in the fluctuating magnetic field generated by electron spin flips in the gadolinium. Using this technique, we demonstrate a reduction in the $T_1$ relaxation time of the NV center by over two orders of magnitude, probed with a spatial resolution of 20 nm. Our result exhibits the viability of the technique for imaging individual spins attached to complex nanostructures or biomolecules, along with studying the magnetic dynamics of isolated spins.
△ Less
Submitted 8 September, 2014;
originally announced September 2014.
-
Three-dimensional localization of spins in diamond using 12C implantation
Authors:
Kenichi Ohno,
F. Joseph Heremans,
Charles F. de las Casas,
Bryan. A. Myers,
Benjamín J. Aleman,
Ania C. Bleszynski Jayich,
David D. Awschalom
Abstract:
We demonstrate three-dimensional localization of a single nitrogen-vacancy (NV) center in diamond by combining nitrogen do** during growth with a post-growth 12C implantation technique that facilitates vacancy formation in the crystal. We show that the NV density can be controlled by the implantation dose without necessitating increase of the nitrogen incorporation. By implanting a large 12C dos…
▽ More
We demonstrate three-dimensional localization of a single nitrogen-vacancy (NV) center in diamond by combining nitrogen do** during growth with a post-growth 12C implantation technique that facilitates vacancy formation in the crystal. We show that the NV density can be controlled by the implantation dose without necessitating increase of the nitrogen incorporation. By implanting a large 12C dose through nanoscale apertures, we can localize an individual NV center within a volume of (~180 nm)**3 at a deterministic position while reproducibly preserving a coherence time (T2) > 300 μs. Our approach enables integration of NV centers into diamond nanostructures to realize scalable spin-sensing devices as well as coherent spin coupling mediated by photons and phonons.
△ Less
Submitted 28 May, 2014;
originally announced May 2014.
-
Dynamic strain-mediated coupling of a single diamond spin to a mechanical resonator
Authors:
Preeti Ovartchaiyapong,
Kenneth W. Lee,
Bryan A. Myers,
Ania C. Bleszynski Jayich
Abstract:
The development of hybrid quantum systems is central to the advancement of emerging quantum technologies, including quantum information science and quantum-assisted sensing. The recent demonstration of high quality single-crystal diamond resonators has led to significant interest in a hybrid system consisting of nitrogen-vacancy center spins that interact with the resonant phonon modes of a macros…
▽ More
The development of hybrid quantum systems is central to the advancement of emerging quantum technologies, including quantum information science and quantum-assisted sensing. The recent demonstration of high quality single-crystal diamond resonators has led to significant interest in a hybrid system consisting of nitrogen-vacancy center spins that interact with the resonant phonon modes of a macroscopic mechanical resonator through crystal strain. However, the nitrogen-vacancy spin-strain interaction has not been well characterized. Here, we demonstrate dynamic, strain-mediated coupling of the mechanical motion of a diamond cantilever to the spin of an embedded nitrogen-vacancy center. Via quantum control of the spin, we quantitatively characterize the axial and transverse strain sensitivities of the nitrogen-vacancy ground state spin. The nitrogen-vacancy center is an atomic scale sensor and we demonstrate spin-based strain imaging with a strain sensitivity of 3 10^(-6) strain Hz^(-1/2). Finally, we show how this spin-resonator system could enable coherent spin-phonon interactions in the quantum regime.
△ Less
Submitted 10 June, 2014; v1 submitted 17 March, 2014;
originally announced March 2014.
-
Probing surface noise with depth-calibrated spins in diamond
Authors:
Bryan A. Myers,
Matthieu C. Dartiailh,
Kenichi Ohno,
Ananda Das,
David D. Awschalom,
Ania C. Bleszynski Jayich
Abstract:
Sensitive nanoscale magnetic resonance imaging (MRI) of target spins using nitrogen-vacancy (NV) centers in diamond will require a quantitative understanding of dominant noise at the surface. We probe this noise by applying dynamical decoupling to shallow NVs at calibrated depths. Results support a model of NV dephasing by a surface bath of electronic spins having a correlation rate of 200 kHz, mu…
▽ More
Sensitive nanoscale magnetic resonance imaging (MRI) of target spins using nitrogen-vacancy (NV) centers in diamond will require a quantitative understanding of dominant noise at the surface. We probe this noise by applying dynamical decoupling to shallow NVs at calibrated depths. Results support a model of NV dephasing by a surface bath of electronic spins having a correlation rate of 200 kHz, much faster than that of the bulk N spin bath. Our method of combining nitrogen delta-do** growth and nanoscale depth imaging paves a way for studying spin noise present in diverse material surfaces.
△ Less
Submitted 21 February, 2014;
originally announced February 2014.
-
Continuous all-optical deceleration and single-photon cooling of molecular beams
Authors:
A. M. Jayich,
A. C. Vutha,
M. T. Hummon,
J. V. Porto,
W. C. Campbell
Abstract:
Ultracold molecular gases are promising as an avenue to rich many-body physics, quantum chemistry, quantum information, and precision measurements. This richness, which flows from the complex internal structure of molecules, makes the creation of ultracold molecular gases using traditional methods (laser plus evaporative cooling) a challenge, in particular due to the spontaneous decay of molecules…
▽ More
Ultracold molecular gases are promising as an avenue to rich many-body physics, quantum chemistry, quantum information, and precision measurements. This richness, which flows from the complex internal structure of molecules, makes the creation of ultracold molecular gases using traditional methods (laser plus evaporative cooling) a challenge, in particular due to the spontaneous decay of molecules into dark states. We propose a way to circumvent this key bottleneck using an all-optical method for decelerating molecules using stimulated absorption and emission with a single ultrafast laser. We further describe single-photon cooling of the decelerating molecules that exploits their high dark state pum** rates, turning the principal obstacle to molecular laser cooling into an advantage. Cooling and deceleration may be applied simultaneously and continuously to load molecules into a trap. We discuss implementation details including multi-level numerical simulations of strontium monohydride (SrH). These techniques are applicable to a large number of molecular species and atoms with the only requirement being an electric dipole transition that can be accessed with an ultrafast laser.
△ Less
Submitted 16 December, 2013;
originally announced December 2013.
-
Cryogenic Optomechanics with a Si3N4 Membrane and Classical Laser Noise
Authors:
A. M. Jayich,
J. C. Sankey,
K. Borkje,
D. Lee,
C. Yang,
M. Underwood,
L. Childress,
A. Petrenko,
S. M. Girvin,
J. G. E. Harris
Abstract:
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband l…
▽ More
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband limit. We monitor the membrane's thermal motion using a heterodyne optical circuit capable of simultaneously measuring both of the mechanical sidebands, and find that the observed optical spring and dam** quantitatively agree with theory. The mechanical sidebands exhibit a Fano lineshape, and to explain this we develop a theory describing heterodyne measurements in the presence of correlated classical laser noise. Finally, we discuss the use of a passive filter cavity to remove classical laser noise, and consider the future requirements for laser cooling this relatively large and low-frequency mechanical element to very near its quantum mechanical ground state.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Engineering shallow spins in diamond with nitrogen delta-do**
Authors:
Kenichi Ohno,
F. Joseph Heremans,
Lee C. Bassett,
Bryan A. Myers,
David M. Toyli,
Ania C. Bleszynski Jayich,
Christopher J. Palmstrom,
David D. Awschalom
Abstract:
We demonstrate nanometer-precision depth control of nitrogen-vacancy (NV) center creation near the surface of synthetic diamond using an in situ nitrogen delta-do** technique during plasma-enhanced chemical vapor deposition. Despite their proximity to the surface, doped NV centers with depths (d) ranging from 5 - 100 nm display long spin coherence times, T2 > 100 \mus at d = 5 nm and T2 > 600 \m…
▽ More
We demonstrate nanometer-precision depth control of nitrogen-vacancy (NV) center creation near the surface of synthetic diamond using an in situ nitrogen delta-do** technique during plasma-enhanced chemical vapor deposition. Despite their proximity to the surface, doped NV centers with depths (d) ranging from 5 - 100 nm display long spin coherence times, T2 > 100 \mus at d = 5 nm and T2 > 600 \mus at d \geq 50 nm. The consistently long spin coherence observed in such shallow NV centers enables applications such as atomic-scale external spin sensing and hybrid quantum architectures.
△ Less
Submitted 11 July, 2012;
originally announced July 2012.
-
High quality factor single-crystal diamond mechanical resonators
Authors:
P. Ovartchaiyapong,
L. M. A. Pascal,
B. A. Myers,
P. Lauria,
A. C. Bleszynski Jayich
Abstract:
Single-crystal diamond is a promising material for MEMs devices because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has largely been limited by challenges in processing and growth. We demonstrate a wafer bonding-based technique to form diamond on insulator, from which we make single-crystal diamond micromecha…
▽ More
Single-crystal diamond is a promising material for MEMs devices because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has largely been limited by challenges in processing and growth. We demonstrate a wafer bonding-based technique to form diamond on insulator, from which we make single-crystal diamond micromechanical resonators with mechanical quality factors as high as 338,000 at room temperature. Variable temperature measurements down to 10 K reveal a nonmonotonic dependence of quality factor on temperature. These resonators enable integration of single-crystal diamond into MEMs technology for classical and quantum applications.
△ Less
Submitted 19 June, 2012;
originally announced June 2012.
-
Fiber-Cavity-Based Optomechanical Device
Authors:
N. E. Flowers-Jacobs,
S. W. Hoch,
J. C. Sankey,
A. Kashkanova,
A. M. Jayich,
C. Deutsch,
J. Reichel,
J. G. E. Harris
Abstract:
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also int…
▽ More
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperature, we expect these devices to be able to detect the shot noise of radiation pressure.
△ Less
Submitted 8 November, 2012; v1 submitted 15 June, 2012;
originally announced June 2012.
-
Measuring mechanical motion with a single spin
Authors:
S. D. Bennett,
S. Kolkowitz,
Q. P. Unterreithmeier,
P. Rabl,
A. C. Bleszynski Jayich,
J. G. E. Harris,
M. D. Lukin
Abstract:
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity…
▽ More
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity limits of this technique, as well as the possibility to measure the zero point motion of the oscillator. Further, we discuss the issue of measurement backaction in sequential measurements and find that although backaction heating can occur, it does not prohibit the detection of zero point motion. Throughout the paper we focus on the experimental implementation of a nitrogen vacancy center coupled to a magnetic cantilever; however, our results are applicable to a wide class of spin-oscillator systems. Implications for preparation of nonclassical states of a mechanical oscillator are also discussed.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
Measurement of the full distribution of the persistent current in normal-metal rings
Authors:
M. A. Castellanos-Beltran,
D. Q. Ngo,
W. E. Shanks,
A. B. Jayich,
J. G. E. Harris
Abstract:
We have measured the persistent current in individual normal metal rings over a wide range of magnetic fields. From this data, we extract the first six cumulants of the single-ring persistent current distribution. Our results are consistent with the theoretical prediction that this distribution should be nearly Gaussian (i.e., that these cumulants should be nearly zero) for diffusive metallic ring…
▽ More
We have measured the persistent current in individual normal metal rings over a wide range of magnetic fields. From this data, we extract the first six cumulants of the single-ring persistent current distribution. Our results are consistent with the theoretical prediction that this distribution should be nearly Gaussian (i.e., that these cumulants should be nearly zero) for diffusive metallic rings. This measurement highlights the particular sensitivity of persistent current to the mesoscopic fluctuations within a single coherent volume.
△ Less
Submitted 21 January, 2013; v1 submitted 17 April, 2012;
originally announced April 2012.
-
Strong and Tunable Nonlinear Optomechanical Coupling in a Low-Loss System
Authors:
Jack C. Sankey,
Cheng Yang,
Benjamin M. Zwickl,
Andrew M. Jayich,
Jack G. E. Harris
Abstract:
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. He…
▽ More
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. Here we demonstrate that avoided crossings in the spectrum of an optical cavity containing a flexible dielectric membrane allow us to realize several different forms of the optomechanical coupling. These include cavity detunings that are (to lowest order) linear, quadratic, or quartic in the membrane's displacement, and a cavity finesse that is linear in (or independent of) the membrane's displacement. All these couplings are realized in a single device with extremely low optical loss and can be tuned over a wide range in situ; in particular, we find that the quadratic coupling can be increased three orders of magnitude beyond previous devices. As a result of these advances, the device presented here should be capable of demonstrating the quantization of the membrane's mechanical energy.
△ Less
Submitted 22 February, 2010;
originally announced February 2010.
-
Improved "Position Squared" Readout of a Mechanical Resonator in an Optical Cavity Using Degenerate Optical Modes
Authors:
Jack C. Sankey,
Andrew M. Jayich,
Benjamin M. Zwickl,
Cheng Yang,
Jack G. E. Harris
Abstract:
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the…
▽ More
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the membrane. However, the readout achieved using a single transverse cavity mode is not sensitive enough to observe quantum jumps between phonon Fock states.
Here we demonstrate an $x^2$-sensitivity that is orders of magnitude stronger using two transverse cavity modes that are nearly degenerate. We derive a first-order perturbation theory to describe the interactions between nearly-degenerate cavity modes and achieve good agreement with our measurements using realistic parameters. We also demonstrate theoretically that the $x^2$-coupling should be easily tunable over a wide range.
△ Less
Submitted 9 November, 2008;
originally announced November 2008.
-
Dispersive optomechanics: a membrane inside a cavity
Authors:
A. M. Jayich,
J. C. Sankey,
B. M. Zwickl,
C. Yang,
J. D. Thompson,
S. M. Girvin,
A. A. Clerk,
F. Marquardt,
J. G. E. Harris
Abstract:
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its…
▽ More
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its optical loss. We compare these calculations with measurements and find excellent agreement in cavities with empty-cavity finesses in the range 10^4 to 10^5. The imaginary part of the membrane's index of refraction is found to be approximately 10^(-4). We calculate the laser cooling performance of this system, with a particular focus on the less-intuitive regime in which photons "tunnel" through the membrane on a time scale comparable to the membrane's period of oscillation. Lastly, we present calculations of quantum non-demolition measurements of the membrane's phonon number in the low signal-to-noise regime where the phonon lifetime is comparable to the QND readout time.
△ Less
Submitted 23 May, 2008;
originally announced May 2008.
-
High quality mechanical and optical properties of commercial silicon nitride membranes
Authors:
B. M. Zwickl,
W. E. Shanks,
A. M. Jayich,
C. Yang,
A. C. Bleszynski Jayich,
J. D. Thompson,
J. G. E. Harris
Abstract:
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for st…
▽ More
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for studying quantum effects in optomechanical systems.
△ Less
Submitted 14 November, 2007;
originally announced November 2007.
-
High sensitivity cantilevers for measuring persistent currents in normal metal rings
Authors:
Ania C. Bleszynski Jayich,
Will E. Shanks,
Rob Ilic,
J. G. E. Harris
Abstract:
We propose a new approach to measuring persistent currents in normal metal rings. By integrating micron-scale metal rings into sensitive micromechanical cantilevers and using the cantilevers as torque magnetometers, it should be possible to measure the rings' persistent currents with greater sensitivity than the SQUID-based and microwave resonator-based detectors used in the past. In addition, c…
▽ More
We propose a new approach to measuring persistent currents in normal metal rings. By integrating micron-scale metal rings into sensitive micromechanical cantilevers and using the cantilevers as torque magnetometers, it should be possible to measure the rings' persistent currents with greater sensitivity than the SQUID-based and microwave resonator-based detectors used in the past. In addition, cantilever-based detectors may allow for measurements in a cleaner electromagnetic environment. We have fabricated ultra sensitive cantilevers with integrated rings and measured their mechanical properties. We present an estimate of the persistent current sensitivity of these cantilever-based detectors, focusing on the limits set by the cantilever's Brownian motion and the shot noise in the laser interferometer that monitors the cantilever.
△ Less
Submitted 27 October, 2007;
originally announced October 2007.
-
Noise thermometry and electron thermometry of a sample-on-cantilever system below 1 Kelvin
Authors:
A. C. Bleszynski Jayich,
W. E. Shanks,
J. G. E. Harris
Abstract:
We have used two types of thermometry to study thermal fluctuations in a microcantilever-based system below 1 K. We measured the temperature of a cantilever's macroscopic degree-of-freedom (via the Brownian motion of its lowest flexural mode) and its microscopic degrees-of-freedom (via the electron temperature of a metal sample mounted on the cantilever). We also measured both temperatures' resp…
▽ More
We have used two types of thermometry to study thermal fluctuations in a microcantilever-based system below 1 K. We measured the temperature of a cantilever's macroscopic degree-of-freedom (via the Brownian motion of its lowest flexural mode) and its microscopic degrees-of-freedom (via the electron temperature of a metal sample mounted on the cantilever). We also measured both temperatures' response to a localized heat source. We find it possible to maintain thermal equilibrium between these two temperatures and a refrigerator down to at least 300 mK. These results are promising for ongoing experiments to probe quantum effects using micromechanical devices.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
-
Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
Authors:
J. D. Thompson,
B. M. Zwickl,
A. M. Jayich,
Florian Marquardt,
S. M. Girvin,
J. G. E. Harris
Abstract:
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in wh…
▽ More
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in which to explore the boundary between quantum and classical physics. Experiments to date have achieved sufficient optomechanical coupling to laser-cool mechanical devices but have not yet reached the quantum regime. The outstanding technical challenge in this field is integrating sensitive micromechanical elements (which must be small, light, and flexible) into high finesse cavities (which are typically much more rigid and massive) without compromising the mechanical or optical properties of either. A second, and more fundamental, challenge is to read out the mechanical element's quantum state: displacement measurements (no matter how sensitive) cannot determine the energy eigenstate of an oscillator, and measurements which couple to quantities other than displacement have been difficult to realize. Here we present a novel optomechanical system which seems to resolve both these challenges. We demonstrate a cavity which is detuned by the motion of a thin dielectric membrane placed between two macroscopic, rigid, high-finesse mirrors. This approach segregates optical and mechanical functionality to physically distinct structures and avoids compromising either. It also allows for direct measurement of the square of the membrane's displacement, and thus in principle the membrane's energy eigenstate. We estimate it should be practical to use this scheme to observe quantum jumps of a mechanical system.
△ Less
Submitted 13 July, 2007; v1 submitted 11 July, 2007;
originally announced July 2007.
-
Stable, mode-matched, medium-finesse optical cavity incorporating a microcantilever mirror
Authors:
J. G. E. Harris,
B. M. Zwickl,
A. M. Jayich
Abstract:
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a near-hemispherical configuration, a Fabry-Perot cavity with a finesse equal to 55 was achieved. The finesse was limited by the optical loss in the cantilever's metal co…
▽ More
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a near-hemispherical configuration, a Fabry-Perot cavity with a finesse equal to 55 was achieved. The finesse was limited by the optical loss in the cantilever's metal coating; diffraction losses from the small mirror were negligible. The cavity achieved passive laser cooling of the cantilever's Brownian motion.
△ Less
Submitted 16 May, 2006;
originally announced May 2006.