Showing 1–50 of 54 results for author: Jantti, R

Thin Film Reconfigurable Intelligent Surface for Harmonic Beam Steering

Authors: Boxuan Xie, Aleksandr Kuznetsov, Lauri Mela, Jari Lietzén, Kalle Ruttik, Alp Karakoç, Riku Jäntti

Abstract: This letter explores an implementation of a novel thin film 1-by-4 reconfigurable intelligent surface (RIS) designed for future communication and sensing scenarios. Utilizing cost-effective inkjet printing methods and additive manufacturing, our approach significantly simplifies the RIS construction process and reduces production costs. The RIS, fabricated on a flexible and lightweight polyethylen… ▽ More This letter explores an implementation of a novel thin film 1-by-4 reconfigurable intelligent surface (RIS) designed for future communication and sensing scenarios. Utilizing cost-effective inkjet printing methods and additive manufacturing, our approach significantly simplifies the RIS construction process and reduces production costs. The RIS, fabricated on a flexible and lightweight polyethylene terephthalate (PET) substrate, integrates antennas, switching circuitry, and a microcontroller unit (MCU), without a ground shield. This setup enables individual and simultaneous control of each RIS element, manipulating the captured carrier signal by reflecting and refracting its dominant harmonics. Beams of the harmonics can be steered to multiple desired directions at both front and back sides of the surface. Measurement results of the beam steering show that the RIS has the potential to enable RIS-aided communication and sensing applications. △ Less

Submitted 20 June, 2024; v1 submitted 10 June, 2024; originally announced June 2024.

Comments: 5 pages, 4 figures, IEEE letter

On Performance of FAS-aided Wireless Powered NOMA Communication Systems

Authors: Farshad Rostami Ghadi, Masoud Kaveh, Kai-Kit Wong, Riku Jantti, Zheng Yan

Abstract: This paper studies the performance of a wireless powered communication network (WPCN) under the non-orthogonal multiple access (NOMA) scheme, where users take advantage of an emerging fluid antenna system (FAS). More precisely, we consider a scenario where a transmitter is powered by a remote power beacon (PB) to send information to the planar NOMA FAS-equipped users through Rayleigh fading channe… ▽ More This paper studies the performance of a wireless powered communication network (WPCN) under the non-orthogonal multiple access (NOMA) scheme, where users take advantage of an emerging fluid antenna system (FAS). More precisely, we consider a scenario where a transmitter is powered by a remote power beacon (PB) to send information to the planar NOMA FAS-equipped users through Rayleigh fading channels. After introducing the distribution of the equivalent channel coefficients to the users, we derive compact analytical expressions for the outage probability (OP) in order to evaluate the system performance. Additionally, we present asymptotic OP in the high signal-to-noise ratio (SNR) regime. Eventually, results reveal that deploying the FAS with only one activated port in NOMA users can significantly enhance the WPCN performance compared with using traditional antenna systems (TAS). △ Less

Submitted 19 May, 2024; originally announced May 2024.

Comments: This manuscript has been submitted to the 20th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob)

Generative AI for Immersive Communication: The Next Frontier in Internet-of-Senses Through 6G

Authors: Nassim Sehad, Lina Bariah, Wassim Hamidouche, Hamed Hellaoui, Riku Jäntti, Mérouane Debbah

Abstract: Over the past two decades, the Internet-of-Things (IoT) has been a transformative concept, and as we approach 2030, a new paradigm known as the Internet of Senses (IoS) is emerging. Unlike conventional Virtual Reality (VR), IoS seeks to provide multi-sensory experiences, acknowledging that in our physical reality, our perception extends far beyond just sight and sound; it encompasses a range of se… ▽ More Over the past two decades, the Internet-of-Things (IoT) has been a transformative concept, and as we approach 2030, a new paradigm known as the Internet of Senses (IoS) is emerging. Unlike conventional Virtual Reality (VR), IoS seeks to provide multi-sensory experiences, acknowledging that in our physical reality, our perception extends far beyond just sight and sound; it encompasses a range of senses. This article explores existing technologies driving immersive multi-sensory media, delving into their capabilities and potential applications. This exploration includes a comparative analysis between conventional immersive media streaming and a proposed use case that leverages semantic communication empowered by generative Artificial Intelligence (AI). The focal point of this analysis is the substantial reduction in bandwidth consumption by 99.93% in the proposed scheme. Through this comparison, we aim to underscore the practical applications of generative AI for immersive media while addressing the challenges and outlining future trajectories. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Coded Backscattering Communication with LTE Pilots as Ambient Signal

Authors: **gyi Liao, Kalle Ruttik, Riku Jantti, Phan-Huy Dinh-Thuy

Abstract: The 3GPP has recently conducted a study on the Ambient Internet of Things (AIoT), with a particular emphasis on examining backscatter communications as one of the primary techniques under consideration. Previous investigations into Ambient Backscatter Communications (AmBC) within the long term evolution (LTE) downlink have shown that it is feasible to utilize the user equipment channel estimator a… ▽ More The 3GPP has recently conducted a study on the Ambient Internet of Things (AIoT), with a particular emphasis on examining backscatter communications as one of the primary techniques under consideration. Previous investigations into Ambient Backscatter Communications (AmBC) within the long term evolution (LTE) downlink have shown that it is feasible to utilize the user equipment channel estimator as a receiver for demodulating frequency shift keyed (FSK) messages transmitted by the backscatter devices. In practical deployment scenarios, the backscattered link often experiences a low signal-to-noise ratio, leading to subpar bit error rate (BER) performance in the case of uncoded transmissions. In this paper, we propose the adoption of the same convolutional coding methodology for backscatter links that is already employed for LTE downlink control signals. This approach facilitates the reuse of identical demodulation functions at the modem for both control signals and backscattered AIoT messages. To assess the performance of the proposed scheme, we conducted experiments utilizing real LTE downlink signals generated by a mobile operator within an office environment. When compared to uncoded FSK, convolutional channel coding delivers a notable gain of approximately 6 dB at a BER of $10^{-3}$. Consequently, the AmBC system demonstrates a high level of reliability, achieving a BER of $10^{-3}$ at a Signal-to-Noise Ratio (SNR) of 5 dB. △ Less

Submitted 20 February, 2024; v1 submitted 19 February, 2024; originally announced February 2024.

Zero-energy Devices for 6G: Technical Enablers at a Glance

Authors: Onel López, Ritesh Kumar Singh, Dinh-Thuy Phan-Huy, Efstathios Katranaras, Nafiseh Mazloum, Riku Jäntti, Hamza Khan, Osmel Rosabal, Pavlos Alexias, Prasoon Raghuwanshi, David Ruiz-Guirola, Bikramjit Singh, Andreas Höglund, Dung Pham Van, Amirhossein Azarbahram, Jeroen Famaey

Abstract: Low-cost, resource-constrained, maintenance-free, and energy-harvesting (EH) Internet of Things (IoT) devices, referred to as zero-energy devices (ZEDs), are rapidly attracting attention from industry and academia due to their myriad of applications. To date, such devices remain primarily unsupported by modern IoT connectivity solutions due to their intrinsic fabrication, hardware, deployment, and… ▽ More Low-cost, resource-constrained, maintenance-free, and energy-harvesting (EH) Internet of Things (IoT) devices, referred to as zero-energy devices (ZEDs), are rapidly attracting attention from industry and academia due to their myriad of applications. To date, such devices remain primarily unsupported by modern IoT connectivity solutions due to their intrinsic fabrication, hardware, deployment, and operation limitations, while lacking clarity on their key technical enablers and prospects. Herein, we address this by discussing the main characteristics and enabling technologies of ZEDs within the next generation of mobile networks, specifically focusing on unconventional EH sources, multi-source EH, power management, energy storage solutions, manufacturing material and practices, backscattering, and low-complexity receivers. Moreover, we highlight the need for lightweight and energy-aware computing, communication, and scheduling protocols, while discussing potential approaches related to TinyML, duty cycling, and infrastructure enablers like radio frequency wireless power transfer and wake-up protocols. Challenging aspects and open research directions are identified and discussed in all the cases. Finally, we showcase an experimental ZED proof-of-concept related to ambient cellular backscattering. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 8 pages, 4 Figures

Multi-Agent Reinforcement Learning for Offloading Cellular Communications with Cooperating UAVs

Authors: Abhishek Mondal, Deepak Mishra, Ganesh Prasad, George C. Alexandropoulos, Azzam Alnahari, Riku Jantti

Abstract: Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an… ▽ More Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an alternative means to offload data traffic from terrestrial BSs, serving as additional access points. This paper introduces a novel approach to efficiently maximize the utilization of multiple UAVs for data traffic offloading from terrestrial BSs. Specifically, the focus is on maximizing user association with UAVs by jointly optimizing UAV trajectories and users association indicators under quality of service constraints. Since, the formulated UAVs control problem is nonconvex and combinatorial, this study leverages the multi agent reinforcement learning framework. In this framework, each UAV acts as an independent agent, aiming to maintain inter UAV cooperative behavior. The proposed approach utilizes the finite state Markov decision process to account for UAVs velocity constraints and the relationship between their trajectories and state space. A low complexity distributed state action reward state action algorithm is presented to determine UAVs optimal sequential decision making policies over training episodes. The extensive simulation results validate the proposed analysis and offer valuable insights into the optimal UAV trajectories. The derived trajectories demonstrate superior average UAV association performance compared to benchmark techniques such as Q learning and particle swarm optimization. △ Less

Submitted 31 May, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: Significant modification required to get novel results

Joint 3D User and 6D Hybrid Reconfigurable Intelligent Surface Localization

Authors: Reza Ghazalian, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: The latest assessments of the emerging technologies for reconfigurable intelligent surfaces (RISs) have indicated the concept's significant potential for localization and sensing, either as individual or simultaneously realized tasks. However, in the vast majority of those studies, the RIS state (i.e., its position and rotation angles) is required to be known a priori. In this paper, we address th… ▽ More The latest assessments of the emerging technologies for reconfigurable intelligent surfaces (RISs) have indicated the concept's significant potential for localization and sensing, either as individual or simultaneously realized tasks. However, in the vast majority of those studies, the RIS state (i.e., its position and rotation angles) is required to be known a priori. In this paper, we address the problem of the joint three-dimensional (3D) localization of a hybrid RIS (HRIS) and a user. The most cost- and power-efficient hybrid version of an RIS is equipped with a single reception radio-frequency chain and meta-atoms capable of simultaneous reconfigurable reflection and sensing. This dual functionality is controlled by adjustable power splitters embedded at each hybrid meta-atom. Focusing on a downlink scenario where a multi-antenna base station transmits multicarrier signals to a user via an HRIS, we propose a multistage approach to jointly estimate the metasurface's 3D position and 3D rotation matrix (i.e., 6D parameter estimation) as well as the user's 3D position. Our simulation results verify the validity of the proposed estimator via extensive comparisons of the root-mean-square error of the state estimations with the Cramér-Rao lower bound (CRB), which is analytically derived. Furthermore, it is showcased that there exists an optimal hybrid reconfigurable intelligent surface (HRIS) power splitting ratio for the desired multi-parameter estimation problem. We also study the robustness of the proposed method in the presence of scattering points in the wireless propagation environment. △ Less

Submitted 8 January, 2024; originally announced January 2024.

Comments: 14 pages, 6 figures, IEEE Transactions Journal

Fault-tolerant one-way noiseless amplification for microwave bosonic quantum information processing

Authors: Hany Khalifa, Riku Jäntti, Gheorghe Sorin Paraoanu

Abstract: Microwave quantum information networks require reliable transmission of single photon propagating modes over lossy channels. In this article we propose a microwave noise-less linear amplifier (NLA) suitable to circumvent the losses incurred by a flying photon undergoing an amplitude dam** channel (ADC). The proposed model is constructed by engineering a simple one-dimensional four node cluster s… ▽ More Microwave quantum information networks require reliable transmission of single photon propagating modes over lossy channels. In this article we propose a microwave noise-less linear amplifier (NLA) suitable to circumvent the losses incurred by a flying photon undergoing an amplitude dam** channel (ADC). The proposed model is constructed by engineering a simple one-dimensional four node cluster state. Contrary to conventional NLAs based on quantum scissors (QS), single photon amplification is realized without the need for photon number resolving detectors (PNRDs). Entanglement between nodes comprising the device's cluster is achieved by means of a controlled phase gate (CPHASE). Furthermore, photon measurements are implemented by quantum non demolition detectors (QNDs), which are currently available as a part of circuit quantum electrodynamics (cQED) toolbox. We analyze the performance of our device practically by considering detection inefficiency and dark count probability. We further examine the potential usage of our device in low power quantum sensing applications and remote secret key generation (SKG). Specifically, we demonstrate the device's ability to prepare loss-free resources offline, and its capacity to overcome the repeater-less bound of SKG. We compare the performance of our device against a QS-NLA for the aforementioned applications, and highlight explicitly the operating conditions under which our device can outperform a QS-NLA. The proposed device is also suitable for applications in the optical domain. △ Less

Submitted 7 December, 2023; originally announced December 2023.

RIS Position and Orientation Estimation via Multi-Carrier Transmissions and Multiple Receivers

Authors: Reza Ghazalian, Hui Chen, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization… ▽ More Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization in a semi-passive manner. In this paper, we consider a static user equipped with an RIS and study the RIS localization problem (i.e., joint three-dimensional position and orientation estimation), when operating in a system comprising a single-antenna transmitter and multiple synchronized single-antenna receivers with known locations. We present a multi-stage estimator using time-of-arrival and spatial frequency measurements, and derive the Cramér-Rao lower bounds for the estimated parameters to validate the estimator's performance. Our simulation results demonstrate the efficiency of the proposed RIS state estimation approach under various system operation parameters. △ Less

Submitted 15 November, 2023; originally announced November 2023.

QoS Aware Transmit Beamforming for Secure Backscattering in Symbiotic Radio Systems

Authors: Mingcheng Nie, Deepak Mishra, Azzam Al-nahari, **hong Yuan, Riku Jantti

Abstract: This paper focuses on secure backscatter transmission in the presence of a passive multi-antenna eavesdropper through a symbiotic radio (SR) network. Specifically, a single-antenna backscatter device (BD) aims to transmit confidential information to a primary receiver (PR) by using a multi-antenna primary transmitter's (PT) signal, where the received symbols are jointly decoded at the PR. Our obje… ▽ More This paper focuses on secure backscatter transmission in the presence of a passive multi-antenna eavesdropper through a symbiotic radio (SR) network. Specifically, a single-antenna backscatter device (BD) aims to transmit confidential information to a primary receiver (PR) by using a multi-antenna primary transmitter's (PT) signal, where the received symbols are jointly decoded at the PR. Our objective is to achieve confidential communications for BD while ensuring that the primary system's quality of service (QoS) requirements are met. We propose an alternating optimisation algorithm that maximises the achievable secrecy rate of BD by jointly optimising primary transmit beamforming and power sharing between information and artificial noise (AN) signals. Numerical results verify our analytical claims on the optimality of the proposed solution and the proposed methodology's underlying low complexity. Additionally, our simulations provide nontrivial design insights into the critical system parameters and quantify the achievable gains over the relevant benchmark schemes. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Zero-Energy-Device for 6G: First Real-Time Backscatter Communication thanks to the Detection of Pilots from an Ambient Commercial Cellular Network

Authors: Papis Ndiaye, Dinh-Thuy Phan-Huy, Ayman Hassan, **gyi Liao, Xiyu Wang, Kalle Ruttik, Riku Jantti

Abstract: Ambient backscatter communication technology (AmBC) and a novel device category called zero-energy devices (ZED) have recently emerged as potential components for the forthcoming 6th generation (6G) networks. A ZED communicates with a smartphone without emitting additional radio waves, by backscattering ambient waves from base stations. Thanks to its very low consumption, a ZED powers itself by ha… ▽ More Ambient backscatter communication technology (AmBC) and a novel device category called zero-energy devices (ZED) have recently emerged as potential components for the forthcoming 6th generation (6G) networks. A ZED communicates with a smartphone without emitting additional radio waves, by backscattering ambient waves from base stations. Thanks to its very low consumption, a ZED powers itself by harvesting ambient light energy. However, the time variations of data traffic in cellular networks prevents AmBC to work properly. Recent works have demonstrated experimentally that a backscatter device could be detected by listening only ambient pilot signals (which are steady) instead of the whole ambient signal (which is bursty) of 4G. However, these experiments were run with a 4G base station emulator and a bulky energy greedy backscatter device. In this paper, for the first time, we demonstrate real-time AmBC on the field, with Orange commercial 4G network as ambient source and Orange Zero-Energy Device. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Comments: 3 pages, 7 figures , 6Get2023

Towards enabling reliable immersive teleoperation through Digital Twin: A UAV command and control use case

Authors: Nassim Sehad, Xinyi Tu, Akash Rajasekaran, Hamed Hellaoui, Riku Jäntti, Mérouane Debbah

Abstract: This paper addresses the challenging problem of enabling reliable immersive teleoperation in scenarios where an Unmanned Aerial Vehicle (UAV) is remotely controlled by an operator via a cellular network. Such scenarios can be quite critical particularly when the UAV lacks advanced equipment (e.g., Lidar-based auto stop) or when the network is subject to some performance constraints (e.g., delay).… ▽ More This paper addresses the challenging problem of enabling reliable immersive teleoperation in scenarios where an Unmanned Aerial Vehicle (UAV) is remotely controlled by an operator via a cellular network. Such scenarios can be quite critical particularly when the UAV lacks advanced equipment (e.g., Lidar-based auto stop) or when the network is subject to some performance constraints (e.g., delay). To tackle these challenges, we propose a novel architecture leveraging Digital Twin (DT) technology to create a virtual representation of the physical environment. This virtual environment accurately mirrors the physical world, accounting for 3D surroundings, weather constraints, and network limitations. To enhance teleoperation, the UAV in the virtual environment is equipped with advanced features that maybe absent in the real UAV. Furthermore, the proposed architecture introduces an intelligent logic that utilizes information from both virtual and physical environments to approve, deny, or correct actions initiated by the UAV operator. This anticipatory approach helps to mitigate potential risks. Through a series of field trials, we demonstrate the effectiveness of the proposed architecture in significantly improving the reliability of UAV teleoperation. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: Accepted by IEEE Globecom 2023

Microwave Gaussian quantum sensing with a CNOT gate receiver

Authors: Hany Khalifa, Kirill Petrovnin, Riku Jäntti, Gheorghe Sorin Paraoanu

Abstract: In quantum illumination (QI) the non-classical correlations between continuous variable (CV) entangled modes of radiation are exploited to detect the presence of a target embedded in thermal noise. The extreme environment where QI outperforms its optimal classical counterpart suggests that applications in the microwave domain would benefit the most from this new sensing paradigm. However all the p… ▽ More In quantum illumination (QI) the non-classical correlations between continuous variable (CV) entangled modes of radiation are exploited to detect the presence of a target embedded in thermal noise. The extreme environment where QI outperforms its optimal classical counterpart suggests that applications in the microwave domain would benefit the most from this new sensing paradigm. However all the proposed QI receivers rely on ideal photon counters or detectors, which are not currently feasible in the microwave domain. Here we propose a new QI receiver that utilizes a CV controlled not gate (CNOT) in order to perform a joint measurement on a target return and its retained twin. Unlike other QI receivers, the entire detection process is carried out by homodyne measurements and square-law detectors. The receiver exploits two squeezed ancillary modes as a part of the gate's operation. These extra resources are prepared offline and their overall gain is controlled passively by a single beamsplitter parameter. We compare our model to other QI receivers and demonstrate its operation regime where it outperforms others and achieves optimal performance. Although the main focus of this study is microwave quantum sensing applications, our proposed device can be built as well in the optical domain, thus rendering it as a new addition to the quantum sensing toolbox in a wider sense. △ Less

Submitted 4 July, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Ambient FSK Backscatter Communications using LTE Cell Specific Reference Signals

Authors: **gyi Liao, Xiyu Wang, Kalle Ruttik, Riku Jantti, Phan-Huy Dinh-Thuy

Abstract: Long Term Evolution (LTE) signal is ubiquitously present in electromagnetic (EM) background environment, which make it an attractive signal source for the ambient backscatter communications (AmBC). In this paper, we propose a system, in which a backscatter device (BD) introduces artificial Doppler shift to the channel which is larger than the natural Doppler but still small enough such that it can… ▽ More Long Term Evolution (LTE) signal is ubiquitously present in electromagnetic (EM) background environment, which make it an attractive signal source for the ambient backscatter communications (AmBC). In this paper, we propose a system, in which a backscatter device (BD) introduces artificial Doppler shift to the channel which is larger than the natural Doppler but still small enough such that it can be tracked by the channel estimator at the User Equipment (UE). Channel estimation is done using the downlink cell specific reference signals (CRS) that are present regardless the UE being attached to the network or not. FSK was selected due to its robust operation in a fading channel. We describe the whole AmBC system, use two receivers. Finally, numerical simulations and measurements are provided to validate the proposed FSK AmBC performance. △ Less

Submitted 31 January, 2023; originally announced January 2023.

Joint User Localization and Location Calibration of A Hybrid Reconfigurable Intelligent Surface

Authors: Reza Ghazalian, Hui Chen, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: The recent research in the emerging technology of reconfigurable intelligent surfaces (RISs) has identified its high potential for localization and sensing. However, to accurately localize a user placed in the area of influence of an RIS, the RIS location needs to be known a priori and its phase profile is required to be optimized for localization. In this paper, we study the problem of the joint… ▽ More The recent research in the emerging technology of reconfigurable intelligent surfaces (RISs) has identified its high potential for localization and sensing. However, to accurately localize a user placed in the area of influence of an RIS, the RIS location needs to be known a priori and its phase profile is required to be optimized for localization. In this paper, we study the problem of the joint localization of a hybrid RIS (HRIS) and a user, considering that the former is equipped with a single reception radio-frequency (RF) chain enabling simultaneous tunable reflections and sensing via power splitting. Focusing on the downlink of a multi-antenna base station, we present a multi-stage approach for the estimation of the HRIS position and orientation as well as the user position. Our simulation results, including comparisons with the Cramér-Rao lower bounds, demonstrate the efficiency of the proposed localization approach, while showcasing that there exists an optimal HRIS power splitting ratio for the desired multi-parameter estimation problem. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Ambient backscatter communications using LTE cell specific reference signals

Authors: Kalle Ruttik, Xiyu Wang, **gyi Liao, Riku Jantti, Phan-Huy Dinh-Thuy

Abstract: Long Term Evolution (LTE) systems provide ubiquitous coverage for mobile communications, which makes it a promising candidate to be used as a signal source in the ambient backscatter communications. In this paper, we propose a system in which a backscatter device modulates the ambient LTE signal by changing its reflection coefficient and the receiver uses the LTE Cell Specific Reference Signals (C… ▽ More Long Term Evolution (LTE) systems provide ubiquitous coverage for mobile communications, which makes it a promising candidate to be used as a signal source in the ambient backscatter communications. In this paper, we propose a system in which a backscatter device modulates the ambient LTE signal by changing its reflection coefficient and the receiver uses the LTE Cell Specific Reference Signals (CRS) to estimate the channel and demodulates the backscattered signal from the obtained channel impulse response estimates. We first outline the overall system, discuss the receiver operation, and then provide experimental evidence on the practicality of the proposed system. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Comments: 4 pages, 5 figures, IEEE RFID-TA 2022

Bi-Static Sensing for Near-Field RIS Localization

Authors: Reza Ghazalian, Kamran Keykhosravi, Hui Chen, Henk Wymeersch, Riku Jäntti

Abstract: We address the localization of a reconfigurable intelligent surface (RIS) for a single-input single-output multi-carrier system using bi-static sensing between a fixed transmitter and a fixed receiver. Due to the deployment of RISs with a large dimension, near-field (NF) scenarios are likely to occur, especially for indoor applications, and are the focus of this work. We first derive the Cramer-Ra… ▽ More We address the localization of a reconfigurable intelligent surface (RIS) for a single-input single-output multi-carrier system using bi-static sensing between a fixed transmitter and a fixed receiver. Due to the deployment of RISs with a large dimension, near-field (NF) scenarios are likely to occur, especially for indoor applications, and are the focus of this work. We first derive the Cramer-Rao bounds (CRBs) on the estimation error of the RIS position and orientation and the time of arrival (TOA) for the path transmitter-RIS-receiver. We propose a multi-stage low-complexity estimator for RIS localization purposes. In this proposed estimator, we first perform a line search to estimate the TOA. Then, we use the far-field approximation of the NF signal model to implicitly estimate the angle of arrival and the angle of departure at the RIS center. Finally, the RIS position and orientation estimate are refined via a quasi-Newton method. Simulation results reveal that the proposed estimator can attain the CRBs. We also investigate the effects of several influential factors on the accuracy of the proposed estimator like the RIS size, transmitted power, system bandwidth, and RIS position and orientation. △ Less

Submitted 8 July, 2022; v1 submitted 28 June, 2022; originally announced June 2022.

Channel Model Mismatch Analysis for XL-MIMO Systems from a Localization Perspective

Authors: Hui Chen, Ahmed Elzanaty, Reza Ghazalian, Musa Furkan Keskin, Riku Jäntti, Henk Wymeersch

Abstract: Radio localization is applied in high-frequency (e.g., mmWave and THz) systems to support communication and to provide location-based services without extra infrastructure. {For solving localization problems, a simplified, stationary, narrowband far-field channel model is widely used due to its compact formulation.} However, with increased array size in extra-large MIMO systems and increased bandw… ▽ More Radio localization is applied in high-frequency (e.g., mmWave and THz) systems to support communication and to provide location-based services without extra infrastructure. {For solving localization problems, a simplified, stationary, narrowband far-field channel model is widely used due to its compact formulation.} However, with increased array size in extra-large MIMO systems and increased bandwidth at upper mmWave bands, the effect of channel spatial non-stationarity (SNS), spherical wave model (SWM), and beam squint effect (BSE) cannot be ignored. In this case, localization performance will be affected when an inaccurate channel model deviating from the true model is adopted. In this work, we employ the MCRB (misspecified Cramér-Rao lower bound) to lower bound the localization error using a simplified mismatched model while the observed data is governed by a more complex true model. The simulation results show that among all the model impairments, the SNS has the least contribution, the SWM dominates when the distance is small compared to the array size, and the BSE has a more significant effect when the distance is much larger than the array size. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Covert backscatter communication with directional MIMO

Authors: Roberto Di Candia, Saneea Malik, Huseyin Yiğitler, Riku Jäntti

Abstract: We study a backscatter communication protocol over a AWGN channel, where a transmitter illuminates a tag with a directional multi-antenna. The tag performs load modulation on the signal while hiding its physical presence from a warden. We show that, if the transmitter-to-tag channel is inaccessible to the warden, then $Θ(n)$ reliable and covert bits can be transmitted over $n$ channel usages. This… ▽ More We study a backscatter communication protocol over a AWGN channel, where a transmitter illuminates a tag with a directional multi-antenna. The tag performs load modulation on the signal while hiding its physical presence from a warden. We show that, if the transmitter-to-tag channel is inaccessible to the warden, then $Θ(n)$ reliable and covert bits can be transmitted over $n$ channel usages. This overcomes the square-root law for covert communication. This paper provides the first evidence for practical implementation of covert backscatter communication, with potential applications in IoT security. △ Less

Submitted 8 February, 2022; originally announced February 2022.

Comments: 4 pages, 2 figures

Optimum Multi-Antenna Ambient Backscatter Receiver for General Binary-Modulated Signal

Authors: Xiyu Wang, Hüseyin Yiğitler, Riku Jäntti

Abstract: Ambient backscatter communication (AmBC) is becoming increasingly popular for enabling green communication amidst the continual development of the Internet-of-things paradigm. Efforts have been put into backscatter signal detection as the detection performance is limited by the low signal-to-interference-plus-noise ratio (SINR) of the signal at the receiver. The low SINR can be improved by adoptin… ▽ More Ambient backscatter communication (AmBC) is becoming increasingly popular for enabling green communication amidst the continual development of the Internet-of-things paradigm. Efforts have been put into backscatter signal detection as the detection performance is limited by the low signal-to-interference-plus-noise ratio (SINR) of the signal at the receiver. The low SINR can be improved by adopting a multi-antenna receiver. In this paper, the optimum multi-antenna receiver that does not impose any constraints on the types of binary modulation performed by the backscatter device and the waveform used by the ambient source system is studied. The proposed receiver owns a simple structure formed by two beamformers. Bit error rate (BER) performances of the optimum receiver are derived under constant-amplitude ambient signal and Gaussian-distributed ambient signal. Moreover, to facilitate the implementation of the optimum receiver, a simplified receiver is proposed and practical approximations to required beamformers are provided. The derived optimum receiver avoids the complex direct path interference cancellation and coherent reception, but exploits the fact that backscatter signal changes the composite channel im**ing at the receiver and the directivity of receiver antenna array. Comparative simulation results show that the performance of the optimum receiver achieves the same performance as the coherent receiver even though it realizes non-coherent reception. The studied receivers provide high flexibility for implementing simple and low-cost receivers in different AmBC systems. △ Less

Submitted 21 August, 2020; originally announced August 2020.

Coherent Multi-antenna Receiver for BPSK-modulated Ambient Backscatter Tags

Authors: Xiyu Wang, Hüseyin Yiğitler, Ruifeng Duan, Estifanos Yohannes Menta, Riku Jäntti

Abstract: Ambient Backscatter Communication (AmBC) is an emerging communication technology that can enable green Internet-of-Things deployments. The widespread acceptance of this paradigm is limited by low Signal-to-Interference-Plus-Noise Ratio (SINR) of the signal im**ing on the receiver antenna due to the strong direct path interference and unknown ambient signal. The adverse impact of these two factor… ▽ More Ambient Backscatter Communication (AmBC) is an emerging communication technology that can enable green Internet-of-Things deployments. The widespread acceptance of this paradigm is limited by low Signal-to-Interference-Plus-Noise Ratio (SINR) of the signal im**ing on the receiver antenna due to the strong direct path interference and unknown ambient signal. The adverse impact of these two factors can be mitigated by using non-coherent multi-antenna receivers, which is known to require higher SINR to reach Bit-Error-Rate (BER) performance of coherent receivers. However, in literature, coherent receivers for AmBC systems are little-studied because of unknown ambient signal, unknown location of AmBC tags, and varying channel conditions. In this paper, a coherent multi-antenna receiver, which does not require a prior information of the ambient signal, for decoding Binary-Phase-shift-Keying (BPSK) modulated signal is presented. The performance of the proposed receiver is compared with the ideal coherent receiver that has a perfect phase information, and also with the performance of non-coherent receiver, which assumes distributions for ambient signal and phase offset caused by excess length of the backscatter path. Comparative simulation results show the designed receiver can achieve the same BER-performance of the ideal coherent receiver with 1-dB more SINR, which corresponds to 5-dB or more gain with respect to non-coherent reception of On-Off-Keying modulated signals. Variation of the detection performance with the tag location shows that the coverage area is in the close vicinity of the transmitter and a larger region around the receiver, which is consistent with the theoretical results. △ Less

Submitted 21 August, 2020; originally announced August 2020.

Secrecy Limits of Energy Harvesting IoT Networks under Channel Imperfections

Authors: Furqan Jameel, Zheng Chang, Riku Jantti

Abstract: Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work a… ▽ More Simultaneous wireless information and power transfer (SWIPT) has recently gathered much research interest from both academia and industry as a key enabler of energy harvesting Internet-of-things (IoT) networks. Due to a number of growing use cases of such networks, it is important to study their performance limits from the perspective of physical layer security (PLS). With this intent, this work aims to provide a novel analysis of the ergodic secrecy capacity of a SWIPT system is provided for Rician and Nakagami-m faded communication links. For a realistic evaluation of the system, the imperfections of channel estimations for different receiver designs of the SWIPT-based IoT systems have been taken into account. Subsequently, the closedform expressions of the ergodic secrecy capacities for the considered scenario are provided and, then, validated through extensive simulations. The results indicate that an error ceiling appears due to imperfect channel estimation at high values of signal-to-noise ratio (SNR). More importantly, the secrecy capacity under different channel conditions stops increasing beyond a certain limit, despite an increase of the main link SNR. The in-depth analysis of secrecy-energy trade-off has also been performed and a comparison has been provided for imperfect and perfect channel estimation cases. As part of the continuous evolution of IoT networks, the results provided in this work can help in identifying the secrecy limits of IoT networks in the presence of multiple eavesdroppers. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: IoT Network, Eavesdroppers, Nakagami-m fading, Physical layer security, Rician fading, SWIPT

Efficient Power-Splitting and Resource Allocation for Cellular V2X Communications

Authors: Furqan Jameel, Wali Ullah Khan, Neeraj Kumar, Riku Jantti

Abstract: The research efforts on cellular vehicle-to-everything (V2X) communications are gaining momentum with each passing year. It is considered as a paradigm-altering approach to connect a large number of vehicles with minimal cost of deployment and maintenance. This article aims to further push the state-of-the-art of cellular V2X communications by providing an optimization framework for wireless charg… ▽ More The research efforts on cellular vehicle-to-everything (V2X) communications are gaining momentum with each passing year. It is considered as a paradigm-altering approach to connect a large number of vehicles with minimal cost of deployment and maintenance. This article aims to further push the state-of-the-art of cellular V2X communications by providing an optimization framework for wireless charging, power allocation, and resource block assignment. Specifically, we design a network model where roadside objects use wireless power from RF signals of electric vehicles for charging and information processing. Moreover, due to the resource-constraint nature of cellular V2X, the power allocation and resource block assignment are performed to efficiently use the resources. The proposed optimization framework shows an improvement in terms of the overall energy efficiency of the network when compared with the baseline technique. The performance gains of the proposed solution clearly demonstrate its feasibility and utility for cellular V2X communications. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Comments: Energy efficiency, Resource block assignment, Vehicle-to-everything (V2X) communications, Wireless power transfer

Efficient Mining Cluster Selection for Blockchain-based Cellular V2X Communications

Authors: Furqan Jameel, Muhammad Awais Javed, Sherali Zeadally, Riku Jantti

Abstract: Cellular vehicle-to-everything (V2X) communication is expected to herald the age of autonomous vehicles in the coming years. With the integration of blockchain in such networks, information of all granularity levels, from complete blocks to individual transactions, would be accessible to vehicles at any time. Specifically, the blockchain technology is expected to improve the security, immutability… ▽ More Cellular vehicle-to-everything (V2X) communication is expected to herald the age of autonomous vehicles in the coming years. With the integration of blockchain in such networks, information of all granularity levels, from complete blocks to individual transactions, would be accessible to vehicles at any time. Specifically, the blockchain technology is expected to improve the security, immutability, and decentralization of cellular V2X communication through smart contract and distributed ledgers. Although blockchain-based cellular V2X networks hold promise, many challenges need to be addressed to enable the future interoperability and accessibility of such large-scale platforms. One such challenge is the offloading of mining tasks in cellular V2X networks. While transportation authorities may try to balance the network mining load, the vehicles may select the nearest mining clusters to offload a task. This may cause congestion and disproportionate use of vehicular network resources. To address this issue, we propose a game-theoretic approach for balancing the load at mining clusters while maintaining fairness among offloading vehicles. Kee** in mind the low-latency requirements of vehicles, we consider a finite channel blocklength transmission which is more practical compared to the use of infinite blocklength codes. The simulation results obtained with our proposed offloading framework show improved performance over the conventional nearest mining cluster selection technique. △ Less

Submitted 29 June, 2020; originally announced July 2020.

Comments: Blockchain, Cellular V2X Communications, Latency, Mining, Vehicular Networks

White Paper on Critical and Massive Machine Type Communication Towards 6G

Authors: Nurul Huda Mahmood, Stefan Böcker, Andrea Munari, Federico Clazzer, Ingrid Moerman, Konstantin Mikhaylov, Onel Lopez, Ok-Sun Park, Eric Mercier, Hannes Bartz, Riku Jäntti, Ravikumar Pragada, Yihua Ma, Elina Annanperä, Christian Wietfeld, Martin Andraud, Gianluigi Liva, Yan Chen, Eduardo Garro, Frank Burkhardt, Hirley Alves, Chen-Feng Liu, Yalcin Sadi, Jean-Baptiste Dore, Eunah Kim , et al. (6 additional authors not shown)

Abstract: The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transfor… ▽ More The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transformation of the society. However, it is evident that some of the more demanding requirements cannot be fully supported by 5G networks. Alongside, further development of the society towards 2030 will give rise to new and more stringent requirements on wireless connectivity in general, and MTC in particular. Driven by the societal trends towards 2030, the next generation (6G) will be an agile and efficient convergent network serving a set of diverse service classes and a wide range of key performance indicators (KPI). This white paper explores the main drivers and requirements of an MTC-optimized 6G network, and discusses the following six key research questions: - Will the main KPIs of 5G continue to be the dominant KPIs in 6G; or will there emerge new key metrics? - How to deliver different E2E service mandates with different KPI requirements considering joint-optimization at the physical up to the application layer? - What are the key enablers towards designing ultra-low power receivers and highly efficient sleep modes? - How to tackle a disruptive rather than incremental joint design of a massively scalable waveform and medium access policy for global MTC connectivity? - How to support new service classes characterizing mission-critical and dependable MTC in 6G? - What are the potential enablers of long term, lightweight and flexible privacy and security schemes considering MTC device requirements? △ Less

Submitted 4 May, 2020; v1 submitted 29 April, 2020; originally announced April 2020.

Comments: White paper by http://www.6GFlagship.com

Two-way covert quantum communication in the microwave regime

Authors: R. Di Candia, H. Yiğitler, G. S. Paraoanu, R. Jäntti

Abstract: Quantum communication addresses the problem of exchanging information across macroscopic distances by employing encryption techniques based on quantum mechanical laws. Here, we advance a new paradigm for secure quantum communication by combining backscattering concepts with covert communication in the microwave regime. Our protocol allows communication between Alice, who uses only discrete phase m… ▽ More Quantum communication addresses the problem of exchanging information across macroscopic distances by employing encryption techniques based on quantum mechanical laws. Here, we advance a new paradigm for secure quantum communication by combining backscattering concepts with covert communication in the microwave regime. Our protocol allows communication between Alice, who uses only discrete phase modulations, and Bob, who has access to cryogenic microwave technology. Using notions of quantum channel discrimination and quantum metrology, we find the ultimate bounds for the receiver performance, proving that quantum correlations can enhance the SNR by up to $6$ dB. These bounds rule out any quantum illumination advantage when the source is strongly amplified, and show that a relevant gain is possible only in the low photon-number regime. We show how the protocol can be used for covert communication, where the carrier signal is indistinguishable from the thermal noise in the environment. We complement our information-theoretic results with a feasible experimental proposal in a circuit-QED platform. This work makes a decisive step toward implementing secure quantum communication concepts in the previously uncharted $1$-$10$ GHz frequency range, in the scenario when the disposable power of one party is severely constrained. △ Less

Submitted 14 May, 2021; v1 submitted 15 April, 2020; originally announced April 2020.

Comments: 26 pages, 6 figures

Journal ref: PRX Quantum 2, 020316 (2021)

Machine Learning assisted Handover and Resource Management for Cellular Connected Drones

Authors: Amin Azari, Fayezeh Ghavimi, Mustafa Ozger, Riku Jantti, Cicek Cavdar

Abstract: Enabling cellular connectivity for drones introduces a wide set of challenges and opportunities. Communication of cellular-connected drones is influenced by 3-dimensional mobility and line-of-sight channel characteristics which results in higher number of handovers with increasing altitude. Our cell planning simulations in coexistence of aerial and terrestrial users indicate that the severe interf… ▽ More Enabling cellular connectivity for drones introduces a wide set of challenges and opportunities. Communication of cellular-connected drones is influenced by 3-dimensional mobility and line-of-sight channel characteristics which results in higher number of handovers with increasing altitude. Our cell planning simulations in coexistence of aerial and terrestrial users indicate that the severe interference from drones to base stations is a major challenge for uplink communications of terrestrial users. Here, we first present the major challenges in co-existence of terrestrial and drone communications by considering real geographical network data for Stockholm. Then, we derive analytical models for the key performance indicators (KPIs), including communications delay and interference over cellular networks, and formulate the handover and radio resource management (H-RRM) optimization problem. Afterwards, we transform this problem into a machine learning problem, and propose a deep reinforcement learning solution to solve H-RRM problem. Finally, using simulation results, we present how the speed and altitude of drones, and the tolerable level of interference, shape the optimal H-RRM policy in the network. Especially, the heat-maps of handover decisions in different drone's altitudes/speeds have been presented, which promote a revision of the legacy handover schemes and redefining the boundaries of cells in the sky. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Applications of Backscatter Communications for Healthcare Networks

Authors: Furqan Jameel, Ruifeng Duan, Zheng Chang, Aleksi Liljemark, Tapani Ristaniemi, Riku Jantti

Abstract: Backscatter communication is expected to help in revitalizing the domain of healthcare through its myriad applications. From on-body sensors to in-body implants and miniature embeddable devices, there are many potential use cases that can leverage the miniature and low-powered nature of backscatter devices. However, the existing literature lacks a comprehensive study that provides a distilled revi… ▽ More Backscatter communication is expected to help in revitalizing the domain of healthcare through its myriad applications. From on-body sensors to in-body implants and miniature embeddable devices, there are many potential use cases that can leverage the miniature and low-powered nature of backscatter devices. However, the existing literature lacks a comprehensive study that provides a distilled review of the latest studies on backscatter communications from the healthcare perspective. Thus, with the objective to promote the utility of backscatter communication in healthcare, this paper aims to identify specific applications of backscatter systems. A detailed taxonomy of recent studies and gap analysis for future research directions are provided in this work. Finally, we conduct measurements at 590 MHz in different propagation environments with the in-house designed backscatter device. The link budget results show the promise of backscatter devices to communicate over large distances for indoor environments which demonstrates its potential in the healthcare system. △ Less

Submitted 21 June, 2019; originally announced June 2019.

Comments: 10 Pages, 4 Figures, 2 Tables

Hybrid Beamformer Design for High Dynamic Range Ambient Backscatter Receivers

Authors: Ruifeng Duan, Estifanos Menta, Hüseyin Yiğitler, Riku Jäntti, Zhu Han

Abstract: In bi-static Ambient Backscatter Communications (AmBC) systems, the direct path from the ambient source to the receiver can be several orders of magnitude stronger than the scattered path modulated by the AmBC device. Because of the large power difference between these two signals, the receiver needs to operate at a large dynamic range. In this paper, we propose a novel analog-digital hybrid null-… ▽ More In bi-static Ambient Backscatter Communications (AmBC) systems, the direct path from the ambient source to the receiver can be several orders of magnitude stronger than the scattered path modulated by the AmBC device. Because of the large power difference between these two signals, the receiver needs to operate at a large dynamic range. In this paper, we propose a novel analog-digital hybrid null-steering beamformer which allows the backscatter receiver to detect and decode the weak AmBC-modulated signal buried in the strong direct path signals and the noise without requiring the instantaneous channel state information. The analog cancellation of the strong signal components allow the receiver automatic gain control to adjust to the level of the weak AmBC signals. This hence allows common analog-to-digital converters to be used for sampling the signal. After cancelling the strong components, the ambient source signal appears as zero mean fast fading from the AmBC system point of view. We use the direct path signal component to track the phase of the unknown ambient signal. In order to avoid channel estimation, we propose AmBC to use orthogonal channelization codes. △ Less

Submitted 21 January, 2019; v1 submitted 16 January, 2019; originally announced January 2019.

Comments: 6 pages

Quantum Backscatter Communication: A New Paradigm

Authors: Roberto Di Candia, Riku Jäntti, Ruifeng Duan, Jari Lietzén, Hany Khalifa, Kalle Ruttik

Abstract: In this paper, we propose a novel quantum backscatter communications (QBC) protocol, inspired by the quantum illumination (QI) concept. In the QBC paradigm, the transmitter generates entangled photon pair. The signal photon is transmitted and the idler photon is kept at the receiver. The tag antenna communicates by performing the pulse amplitude modulation (PAM), binary phase shift keying (BPSK) o… ▽ More In this paper, we propose a novel quantum backscatter communications (QBC) protocol, inspired by the quantum illumination (QI) concept. In the QBC paradigm, the transmitter generates entangled photon pair. The signal photon is transmitted and the idler photon is kept at the receiver. The tag antenna communicates by performing the pulse amplitude modulation (PAM), binary phase shift keying (BPSK) or quadratic phase shift keying (QPSK) on the signal im**ing at the antenna. Using the sum-frequency-generation receiver, our QBC protocol achieves a 6 dB error exponent gain for PAM and BPSK, and 3 dB gain for QPSK over its classical counterpart. Finally, we discuss the QI-enhanced secure backscatter communication. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Comments: 5 pages

5G Control Channel Design for Ultra-Reliable Low-Latency Communications

Authors: Hamidreza Shariatmadari, Sassan Iraji, Riku Jantti, Petar Popovski, Zexian Li, Mikko A. Uusitalo

Abstract: The fifth generation (5G) of wireless systems holds the promise of supporting a wide range of services with different communication requirements. Ultra-reliable low-latency communications (URLLC) is a generic service that enables mission-critical applications, such as industrial automation, augmented reality, and vehicular communications. URLLC has stringent requirements for reliability and latenc… ▽ More The fifth generation (5G) of wireless systems holds the promise of supporting a wide range of services with different communication requirements. Ultra-reliable low-latency communications (URLLC) is a generic service that enables mission-critical applications, such as industrial automation, augmented reality, and vehicular communications. URLLC has stringent requirements for reliability and latency of delivering both data and control information. In order to meet these requirements, the Third Generation Partnership Project (3GPP) has been introducing new features to the upcoming releases of the cellular system standards, namely releases 15 and beyond. This article reviews some of these features and introduces new enhancements for designing the control channels to efficiently support the URLLC. In particular, a flexible slot structure is presented as a solution to detect a failure in delivering the control information at an early stage, thereby allowing timely retransmission of the control information. Finally, some remaining challenges and envisioned research directions are discussed for sha** the 5G new radio (NR) as a unified wireless access technology for supporting different services. △ Less

Submitted 12 March, 2018; originally announced March 2018.

Energy Efficiency Maximization of Full-Duplex Two-Way Relay With Non-Ideal Power Amplifiers and Non-Negligible Circuit Power

Authors: Qimei Cui, Yuhao Zhang, Wei Ni, Mikko Valkama, Riku Jantti

Abstract: In this paper, we maximize the energy efficiency (EE) of full-duplex (FD) two-way relay (TWR) systems under non-ideal power amplifiers (PAs) and non-negligible transmission-dependent circuit power. We start with the case where only the relay operates full duplex and two timeslots are required for TWR. Then, we extend to the advanced case, where the relay and the two nodes all operate full duplex,… ▽ More In this paper, we maximize the energy efficiency (EE) of full-duplex (FD) two-way relay (TWR) systems under non-ideal power amplifiers (PAs) and non-negligible transmission-dependent circuit power. We start with the case where only the relay operates full duplex and two timeslots are required for TWR. Then, we extend to the advanced case, where the relay and the two nodes all operate full duplex, and accomplish TWR in a single timeslot. In both cases, we establish the intrinsic connections between the optimal transmit powers and durations, based on which the original non-convex EE maximization can be convexified and optimally solved. Simulations show the superiority of FD-TWR in terms of EE, especially when traffic demand is high. The simulations also reveal that the maximum EE of FD-TWR is more sensitive to the PA efficiency, than it is to self-cancellation. The full FD design of FD-TWR is susceptible to traffic imbalance, while the design with only the relay operating in the FD mode exhibits strong tolerance. △ Less

Submitted 5 January, 2018; originally announced January 2018.

Comments: 14 pages, 11 figures, IEEE Transactions on Wireless Communications

Journal ref: IEEE Transactions on Wireless Communications, vol. 16, no. 9, pp. 6264-6278, Sept. 2017

RSS Models for Respiration Rate Monitoring

Authors: Hüseyin Yiğitler, Ossi Kaltiokallio, Roland Hostettler, Riku Jäntti, Neal Patwari, Simo Särkkä

Abstract: Received signal strength based respiration rate monitoring is emerging as an alternative non-contact technology. These systems make use of the radio measurements of short-range commodity wireless devices, which vary due to the inhalation and exhalation motion of a person. The success of respiration rate estimation using such measurements depends on the signal-to-noise ratio, which alters with prop… ▽ More Received signal strength based respiration rate monitoring is emerging as an alternative non-contact technology. These systems make use of the radio measurements of short-range commodity wireless devices, which vary due to the inhalation and exhalation motion of a person. The success of respiration rate estimation using such measurements depends on the signal-to-noise ratio, which alters with properties of the person and with the measurement system. To date, no model has been presented that allows evaluation of different deployments or system configurations for successful breathing rate estimation. In this paper, a received signal strength model for respiration rate monitoring is introduced. It is shown that measurements in linear and logarithmic scale have the same functional form, and the same estimation techniques can be used in both cases. The implications of the model are validated under varying signal-to-noise ratio conditions using the performances of three estimators: batch frequency estimator, recursive Bayesian estimator, and model-based estimator. The results are in coherence with the findings, and they imply that different estimators are advantageous in different signal-to-noise ratio regimes. △ Less

Submitted 26 November, 2017; originally announced November 2017.

Multiantenna Quantum Backscatter Communications

Authors: Riku Jäntti, Roberto Di Candia, Ruifeng Duan, Kalle Ruttik

Abstract: Quantum illumination (QI) is a revolutionary photonic quantum sensing paradigm that enhances the sensitivity of photodetection in noisy and lossy environments. The QI concept has been recently used to propose a quantum backscatter communication (QBC), with the aim of increasing the receiver sensitivity beyond the limits of its classical counterpart. One of the practical challenges in microwave QI… ▽ More Quantum illumination (QI) is a revolutionary photonic quantum sensing paradigm that enhances the sensitivity of photodetection in noisy and lossy environments. The QI concept has been recently used to propose a quantum backscatter communication (QBC), with the aim of increasing the receiver sensitivity beyond the limits of its classical counterpart. One of the practical challenges in microwave QI is the slow rate at which the entangled microwave modes can be generated. Here, we propose to mitigate this problem by using a multiple-input multiple-output antenna system to synthetically increase the number of efficiently-distinguishable modes in the QBC context. △ Less

Submitted 9 July, 2017; originally announced July 2017.

Comments: 6 pages, 4 figures

Co-primary Spectrum Sharing for Inter-operator Device-to-Device Communication

Authors: Byung** Cho, Konstantinos Koufos, Riku Jäntti, Seong-Lyun Kim

Abstract: The business potential of device-to-device (D2D) communication including public safety and vehicular communications will be realized only if direct communication between devices subscribed to different mobile operators (OPs) is supported. One possible way to implement inter-operator D2D communication may use the licensed spectrum of the OPs, i.e., OPs agree to share spectrum in a co-primary manner… ▽ More The business potential of device-to-device (D2D) communication including public safety and vehicular communications will be realized only if direct communication between devices subscribed to different mobile operators (OPs) is supported. One possible way to implement inter-operator D2D communication may use the licensed spectrum of the OPs, i.e., OPs agree to share spectrum in a co-primary manner, and inter-operator D2D communication is allocated over spectral resources contributed from both parties. In this paper, we consider a spectrum sharing scenario where a number of OPs construct a spectrum pool dedicated to support inter-operator D2D communication. OPs negotiate in the form of a non-cooperative game about how much spectrum each OP contributes to the spectrum pool. OPs submit proposals to each other in parallel until a consensus is reached. When every OP has a concave utility function on the box-constrained region, we identify the conditions guaranteeing the existence of a unique equilibrium point. We show that the iterative algorithm based on the OP's best response might not converge to the equilibrium point due to myopically overreacting to the response of the other OPs, while the Jacobi-play strategy update algorithm can converge with an appropriate selection of update parameter. Using the Jacobi-play update algorithm, we illustrate that asymmetric OPs contribute an unequal amount of resources to the spectrum pool; However all participating OPs may experience significant performance gains compared to the scheme without spectrum sharing. △ Less

Submitted 7 November, 2016; originally announced November 2016.

Comments: Accepted to appear in IEEE Journal on Selected Areas in Communications (JSAC)

Packet Error Rate Analysis of Uncoded Schemes in Block-Fading Channels using Extreme Value Theory

Authors: Aamir Mahmood, Riku Jäntti

Abstract: We present a generic approximation of the packet error rate (PER) function of uncoded schemes in the AWGN channel using extreme value theory (EVT). The PER function can assume both the exponential and the Gaussian Q-function bit error rate (BER) forms. The EVT approach leads us to a best closed-form approximation, in terms of accuracy and computational efficiency, of the average PER in block-fadin… ▽ More We present a generic approximation of the packet error rate (PER) function of uncoded schemes in the AWGN channel using extreme value theory (EVT). The PER function can assume both the exponential and the Gaussian Q-function bit error rate (BER) forms. The EVT approach leads us to a best closed-form approximation, in terms of accuracy and computational efficiency, of the average PER in block-fading channels. The numerical analysis shows that the approximation holds tight for any value of SNR and packet length whereas the earlier studies approximate the average PER only at asymptotic SNRs and packet lengths. △ Less

Submitted 18 October, 2016; originally announced October 2016.

Design and Analysis of Downlink Channel Estimation Based on Parametric Model for Massive MIMO in FDD Systems

Authors: Yinsheng Liu, Yinjun Liu, Qimei Cui, Riku Jantti

Abstract: This paper investigates downlink channel estimation in frequency-division duplex (FDD)-based massive multiple-input multiple-output (MIMO) systems. To reduce the overhead of downlink channel estimation and uplink feedback in FDD systems, cascaded precoding has been used in massive MIMO such that only a low-dimensional effective channel needs to be estimated and fed back. On the other hand, traditi… ▽ More This paper investigates downlink channel estimation in frequency-division duplex (FDD)-based massive multiple-input multiple-output (MIMO) systems. To reduce the overhead of downlink channel estimation and uplink feedback in FDD systems, cascaded precoding has been used in massive MIMO such that only a low-dimensional effective channel needs to be estimated and fed back. On the other hand, traditional channel estimations can hardly achieve the minimum mean-square-error (MMSE) performance due to lack of the a priori knowledge of the channels. In this paper, we design and analyze a strategy for downlink channel estimation based on the parametric model in massive MIMO with cascaded precoding. For a parametric model, channel frequency responses are expressed using the path delays and the associated complex amplitudes. The path delays of uplink channels are first estimated and quantized at the base station, then fed forward to the user equipment (UE) through a dedicated feedforward link. In this manner, the UE can obtain the a priori knowledge of the downlink channel in advance since it has been demonstrated that the downlink and the uplink channels can have identical path delays. Our analysis and simulation results show that the proposed approach can achieve near-MMSE performance. △ Less

Submitted 22 August, 2016; originally announced August 2016.

On the Achievable Rate of Bi-Static Modulated Re-Scatter Systems

Authors: Ruifeng Duan, Riku Jäntti, Hüseyin Yiğitler, Kalle Ruttik

Abstract: In ambient re-scatter communications, devices convey information by modulating and re-scattering the radio frequency signals im**ing on their antennas. In this correspondence, we consider a system consisting of a legacy modulated continuous carrier multiple-input-multiple-output (MIMO) link and a multi-antenna modulated re-scatter (MRS) node, where the MRS node modulates and re-scatters the sign… ▽ More In ambient re-scatter communications, devices convey information by modulating and re-scattering the radio frequency signals im**ing on their antennas. In this correspondence, we consider a system consisting of a legacy modulated continuous carrier multiple-input-multiple-output (MIMO) link and a multi-antenna modulated re-scatter (MRS) node, where the MRS node modulates and re-scatters the signal generated by the legacy transmitter. The receiver seeks to decode both the original message and the information added by the MRS. We show that the achievable sum rate of this system exceeds that which the legacy system could achieve alone. We further consider the impact of channel estimation errors under the least squares channel estimation and study the achievable rate of the legacy and MRS systems, where a linear minimum mean square error receiver with successive interference cancellation is utilized for joint decoding. △ Less

Submitted 12 June, 2017; v1 submitted 5 July, 2016; originally announced July 2016.

Comments: 5 pages, 3 figures, accepted

Detector Based Radio Tomographic Imaging

Authors: Hüseyin Yiğitler, Riku Jäntti, Ossi Kaltiokallio, Neal Patwari

Abstract: Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods solve an associated inverse problem using algebraic or compressed sensing reconstruction algorithms. We propose an alternative imaging method that reconstructs spa… ▽ More Received signal strength based radio tomographic imaging is a popular device-free indoor localization method which reconstructs the spatial loss field of the environment using measurements from a dense wireless network. Existing methods solve an associated inverse problem using algebraic or compressed sensing reconstruction algorithms. We propose an alternative imaging method that reconstructs spatial field of occupancy using a back-projection based reconstruction algorithm. The introduced system has the following advantages over the other imaging based methods: i.) significantly lower computational complexity such that no floating point multiplication is required; ii.) each link's measured data is compressed to a single bit, providing improved scalability; iii.) physically significant and repeatable parameters. The proposed method is validated using measurement data. Results show that the proposed method achieves the above advantages without loss of accuracy compared to the other available methods. △ Less

Submitted 11 April, 2016; originally announced April 2016.

Energy Efficiency of Massive MIMO: Co** with Daily Load Variation

Authors: M M Aftab Hossain, Cicek Cavdar, Emil Björnson, Riku Jäntti

Abstract: Massive MIMO is a promising technique to meet the exponential growth of mobile traffic demand. However, contrary to the current systems, energy consumption of next generation networks is required to be load adaptive as the network load varies significantly throughout the day. In this paper, we propose a load adaptive multi-cell massive MIMO system where each base station (BS) adapts the number of… ▽ More Massive MIMO is a promising technique to meet the exponential growth of mobile traffic demand. However, contrary to the current systems, energy consumption of next generation networks is required to be load adaptive as the network load varies significantly throughout the day. In this paper, we propose a load adaptive multi-cell massive MIMO system where each base station (BS) adapts the number of antennas to the daily load profile (DLP) in order to maximize the downlink energy efficiency (EE). In order to incorporate the DLP, the load at each BS is modeled as an M/G/m/m state dependent queue under the assumption that the network is dimensioned to serve a maximum number of users at the peak load. The EE maximization problem is formulated in a game theoretic framework where the number of antennas to be used by a BS is determined through best response iteration. This load adaptive system achieves around 24% higher EE and saves around 40% energy compared to a baseline system where the BSs always run with the fixed number of antennas that is most energy efficient at the peak load and that can be switched off when there is no traffic. △ Less

Submitted 7 December, 2015; originally announced December 2015.

Comments: 27 pages, 10 Figures. arXiv admin note: substantial text overlap with arXiv:1510.00649

Energy-Efficient Load-Adaptive Massive MIMO

Authors: M. M. Aftab Hossain, Cicek Cavdar, Emil Björnson, Riku Jäntti

Abstract: Massive MIMO is a promising technique to meet the exponential growth of global mobile data traffic demand. However, contrary to the current systems, energy consumption of next generation networks is required to be load adaptive as the network load varies significantly throughout the day. In this paper, we propose a load adaptive massive MIMO system that varies the number of antennas following the… ▽ More Massive MIMO is a promising technique to meet the exponential growth of global mobile data traffic demand. However, contrary to the current systems, energy consumption of next generation networks is required to be load adaptive as the network load varies significantly throughout the day. In this paper, we propose a load adaptive massive MIMO system that varies the number of antennas following the daily load profile (DLP) in order to maximize the downlink energy efficiency (EE). A multi-cell system is considered where each base station (BS) is equipped with a large number of antennas to serve many single antenna users. In order to incorporate DLP, each BS is modeled as an M/G/m/m state dependent queue under the assumption that the network is dimensioned to serve a maximum number of users at the peak load. For a given number of users in a cell, the optimum number of active antennas maximizing EE is derived. The EE maximization problem is formulated in a game theoretic framework where the number of antennas to be used by a BS is determined through best response iteration. This load adaptive system achieves overall 19% higher EE compared to a baseline system where the BSs always run with the fixed number of antennas that is most energy efficient at peak load and that can be switched-off when there is no traffic △ Less

Submitted 2 October, 2015; originally announced October 2015.

Comments: 6 pages, 5 figures. arXiv admin note: text overlap with arXiv:1411.1998

Asymptotic Analysis of Multi-Antenna Cognitive Radio Systems Using Extreme Value Theory

Authors: Ruifeng Duan, Zhong Zheng, Riku Jäntti, Jyri Hämäläinen

Abstract: We consider a spectrum-sharing cognitive radio system with antenna selection applied at the secondary transmitter (ST). Based on the extreme value theory, we deduce a simple and accurate expression for the asymptotic distribution of the signal to interference plus noise ratio at the secondary receiver. Using this result, the asymptotic mean capacity and the outage capacity for the secondary user (… ▽ More We consider a spectrum-sharing cognitive radio system with antenna selection applied at the secondary transmitter (ST). Based on the extreme value theory, we deduce a simple and accurate expression for the asymptotic distribution of the signal to interference plus noise ratio at the secondary receiver. Using this result, the asymptotic mean capacity and the outage capacity for the secondary user (SU) are derived. The obtained asymptotic capacities approach the exact results as the number of transmit antennas $N$ increases. Results indicate that the rate of the SU scales as $\log(N)$ when the transmit power of the ST is limited by the maximum allowable interference level, while rate scales as $\log(\log(N))$ if ST is limited by the maximum transmit power. △ Less

Submitted 17 June, 2015; originally announced June 2015.

Coordination protocol for inter-operator spectrum sharing in co-primary 5G small cell networks

Authors: Bikramjit Singh, Sofonias Hailu, Konstantinos Koufos, Alexis A. Dowhuszko, Olav Tirkkonen, Riku Jäntti, Randall Berry

Abstract: We consider spectrum sharing between a limited set of operators having similar rights for accessing spectrum. A coordination protocol acting on the level of the Radio Access Network (RAN) is designed. The protocol is non-cooperative, but assumes an agreement to a set of negotiation rules. The signaling overhead is low, and knowledge of competitor's channel state information is not assumed. No mone… ▽ More We consider spectrum sharing between a limited set of operators having similar rights for accessing spectrum. A coordination protocol acting on the level of the Radio Access Network (RAN) is designed. The protocol is non-cooperative, but assumes an agreement to a set of negotiation rules. The signaling overhead is low, and knowledge of competitor's channel state information is not assumed. No monetary transactions are involved; instead, spectrum sharing is based on a RAN-internal virtual currency. The protocol is applicable in a scenario of mutual renting and when the operators form a spectrum pool. The protocol is reactive to variations in interference and load of the operators, and shows gains in a simulated small cell scenario compared to not using any coordination protocol. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Comments: To be published in IEEE Communications Magazine, Jul. 2015

Energy saving market for mobile operators

Authors: M. M. Aftab Hossain, Riku Jäntti, Cicek Cavdar

Abstract: Ensuring seamless coverage accounts for the lion's share of the energy consumed in a mobile network. Overlap** coverage of three to five mobile network operators (MNOs) results in enormous amount of energy waste which is avoidable. The traffic demands of the mobile networks vary significantly throughout the day. As the offered load for all networks are not same at a given time and the difference… ▽ More Ensuring seamless coverage accounts for the lion's share of the energy consumed in a mobile network. Overlap** coverage of three to five mobile network operators (MNOs) results in enormous amount of energy waste which is avoidable. The traffic demands of the mobile networks vary significantly throughout the day. As the offered load for all networks are not same at a given time and the differences in energy consumption at different loads are significant, multi-MNO capacity/coverage sharing can dramatically reduce energy consumption of mobile networks and provide the MNOs a cost effective means to cope with the exponential growth of traffic. In this paper, we propose an energy saving market for a multi-MNO network scenario. As the competing MNOs are not comfortable with information sharing, we propose a double auction clearinghouse market mechanism where MNOs sell and buy capacity in order to minimize energy consumption. In our setting, each MNO proposes its bids and asks simultaneously for buying and selling multi-unit capacities respectively to an independent auctioneer, i.e., clearinghouse and ends up either as a buyer or as a seller in each round. We show that the mechanism allows the MNOs to save significant percentage of energy cost throughout a wide range of network load. Different than other energy saving features such as cell sleep or antenna muting which can not be enabled at heavy traffic load, dynamic capacity sharing allows MNOs to handle traffic bursts with energy saving opportunity. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Comments: 6 pages, 2 figures, to be published in ICC 2015 workshop on Next Generation Green ICT

Spectrum Allocation for Multi-Operator Device-to-Device Communication

Authors: Byung** Cho, Konstantinos Koufos, Riku Jäntti, Zexian Li, Mikko A. Uusitalo

Abstract: In order to harvest the business potential of device-to-device (D2D) communication, direct communication between devices subscribed to different mobile operators should be supported. This would also support meeting requirements resulting from D2D relevant scenarios, like vehicle-to-vehicle communication. In this paper, we propose to allocate the multi-operator D2D communication over dedicated cell… ▽ More In order to harvest the business potential of device-to-device (D2D) communication, direct communication between devices subscribed to different mobile operators should be supported. This would also support meeting requirements resulting from D2D relevant scenarios, like vehicle-to-vehicle communication. In this paper, we propose to allocate the multi-operator D2D communication over dedicated cellular spectral resources contributed from both operators. Ideally, the operators should negotiate about the amount of spectrum to contribute, without revealing proprietary information to each other and/or to other parties. One possible way to do that is to use the sequence of operators' best responses, i.e., the operators make offers about the amount of spectrum to contribute using a sequential updating procedure until reaching consensus. Besides spectrum allocation, we need a mode selection scheme for the multi-operator D2D users. We use a stochastic geometry framework to capture the impact of mode selection on the distribution of D2D users and assess the performance of the best response iteration algorithm. With the performance metrics considered in the paper, we show that the best response iteration has a unique Nash equilibrium that can be reached from any initial strategy. In general, asymmetric operators would contribute unequal amounts of spectrum for multi-operator D2D communication. Provided that the multi-operator D2D density is not negligible, we show that both operators may experience significant performance gains as compared to the scheme without spectrum sharing. △ Less

Submitted 14 February, 2015; originally announced February 2015.

Comments: To appear in IEEE ICC 2015

Mathematics of Sparsity and Entropy: Axioms, Core Functions and Sparse Recovery

Authors: Giancarlo Pastor, Inmaculada Mora-Jiménez, Riku Jäntti, Antonio J. Caamaño

Abstract: Sparsity and entropy are pillar notions of modern theories in signal processing and information theory. However, there is no clear consensus among scientists on the characterization of these notions. Previous efforts have contributed to understand individually sparsity or entropy from specific research interests. This paper proposes a mathematical formalism, a joint axiomatic characterization, whi… ▽ More Sparsity and entropy are pillar notions of modern theories in signal processing and information theory. However, there is no clear consensus among scientists on the characterization of these notions. Previous efforts have contributed to understand individually sparsity or entropy from specific research interests. This paper proposes a mathematical formalism, a joint axiomatic characterization, which contributes to comprehend (the beauty of) sparsity and entropy. The paper gathers and introduces inherent and first principles criteria as axioms and attributes that jointly characterize sparsity and entropy. The proposed set of axioms is constructive and allows to derive simple or \emph{core functions} and further generalizations. Core sparsity generalizes the Hoyer measure, Gini index and $pq$-means. Core entropy generalizes the Rényi entropy and Tsallis entropy, both of which generalize Shannon entropy. Finally, core functions are successfully applied to compressed sensing and to minimum entropy given sample moments. More importantly, the (simplest) core sparsity adds theoretical support to the $\ell_1$-minimization approach in compressed sensing. △ Less

Submitted 16 December, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: 33 pages, 4 figures, 9 tables This very preliminary work has been withdrawn by the author due to crucial errors. No future version will be available

MSC Class: 94A15

Dimensioning of PA for massive MIMO system with load adaptive number of antennas

Authors: M. M. Aftab Hossain, Riku Jäntti, Cicek Cavdar

Abstract: This paper takes into consideration the non-ideal efficiency characteristics of realistic power amplifiers (PAs) along with the daily traffic profile in order to investigate the impact of PA dimensioning on the energy efficiency (EE) of load adaptive massive MIMO system. A multicellular system has been considered where each base station (BS) is equipped with a large number of antennas to serve man… ▽ More This paper takes into consideration the non-ideal efficiency characteristics of realistic power amplifiers (PAs) along with the daily traffic profile in order to investigate the impact of PA dimensioning on the energy efficiency (EE) of load adaptive massive MIMO system. A multicellular system has been considered where each base station (BS) is equipped with a large number of antennas to serve many single antenna users. For a given number of users in a cell, the optimum number of active antennas maximizing EE has been derived where total BS downlink power is assumed to be fixed. Under the same assumption, the PAs have been dimensioned in a way that maximizes network EE not only for a single time snapshot but over twenty four hours of operation while considering dynamic efficiency characteristics of the PAs. In order to incorporate this daily load profile, each BS has been modeled as an M/G/m/m state dependent queue under the assumption that the network is dimensioned to serve a maximum number of users at a time corresponding to 100% cell traffic load. This load adaptive system along with the optimized PA dimensioning achieves 30% higher energy efficiency compared to a base line system where the BSs always run with a fixed number of active antennas which are most energy efficient while serving 100% traffic load. △ Less

Submitted 24 October, 2014; originally announced November 2014.

Comments: 7 pages, 8 figures, to be published in Globecom GBA workshop 2014

Performance Analysis of Mean Value-Based Power Allocation with Primary User Interference in Spectrum Sharing Systems

Authors: Ruifeng Duan, Riku Jäntti, Mohammed S. Elmusrati

Abstract: In this paper, we provide an exact expression for the ergodic capacity of the secondary user, and a unified closed-form expression for its bounds with taking the consideration of the primary interference at the secondary receiver. In addition, a simple but accurate approximation of the the ergodic capacity of the primary user is presented. Moreover, a primary user capacity loss based power allocat… ▽ More In this paper, we provide an exact expression for the ergodic capacity of the secondary user, and a unified closed-form expression for its bounds with taking the consideration of the primary interference at the secondary receiver. In addition, a simple but accurate approximation of the the ergodic capacity of the primary user is presented. Moreover, a primary user capacity loss based power allocation scheme for the secondary user is also proposed. Finally, we compare the performance of the two power allocation schemes in terms of the sum capacity. The results are validated through using numerical results and simulations. △ Less

Submitted 29 October, 2014; originally announced October 2014.

Comments: 14 pages, 10 figures

Input-Output Clustering Criterion (IOCC) for Optimizing Distributed Antenna Locations

Authors: Zekeriya Uykan, Riku Jantti

Abstract: In this paper, we propose an input-output space clustering criterion (IOCC) to optimize the locations of the remote antenna units (RAUs) of generalized Distributed Antenna Systems (DASs) under sum power constraint. In IOCC, the input space refers to RAU location space and output space refers to location specific ergodic capacity space for noise-limited environments. Given a location-specific arbit… ▽ More In this paper, we propose an input-output space clustering criterion (IOCC) to optimize the locations of the remote antenna units (RAUs) of generalized Distributed Antenna Systems (DASs) under sum power constraint. In IOCC, the input space refers to RAU location space and output space refers to location specific ergodic capacity space for noise-limited environments. Given a location-specific arbitrary desired ergodic capacity function over a geographical area, we define the error as the difference between actual and desired ergodic capacity. Our investigations show that i) the IOCC provides an upper bound to the cell averaged ergodic capacity error; and ii) the derived upper bound is equal to a weighted quantization error function in location-capacity space (input-output space) and iii) the upper bound can be made arbitrarily small by a clustering process increasing the number of RAUs for a feasible DAS. IOCC converts the RAU location problem into a codebook design problem in vector quantization in input-output space, and thus includes the Squared Distance Criterion (SDC) for DAS in [15] (and other related papers) as a special case, which takes only the input space into account. Computer simulations confirm the theoretical findings and show that the IOCC outperforms the SDC for DAS in terms of the defined cell averaged "effective" ergodic capacity. △ Less

Submitted 27 September, 2014; originally announced September 2014.

Comments: totally 13 plots in Fig.1 to Fig.11, 32 pages, submitted to IEEE Trans. Information Theory

Enhancing the Accuracy of Device-free Localization Using Spectral Properties of the RSS

Authors: Ossi Kaltiokallio, Hüseyin Yiğitler, Riku Jäntti

Abstract: Received signal strength based device-free localization has attracted considerable attention in the research society over the past years to locate and track people who are not carrying any electronic device. Typically, the person is localized using a spatial model that relates the time domain signal strength measurements to the person's position. Alternatively, one could exploit spectral propertie… ▽ More Received signal strength based device-free localization has attracted considerable attention in the research society over the past years to locate and track people who are not carrying any electronic device. Typically, the person is localized using a spatial model that relates the time domain signal strength measurements to the person's position. Alternatively, one could exploit spectral properties of the received signal strength which reflects the rate at which the wireless propagation medium is being altered, an opportunity that has not been exploited in the related literature. In this paper, the power spectral density of the signal strength measurements are related to the person's position and velocity to augment the particle filter based tracking algorithm with an additional measurement. The system performance is evaluated using simulations and validated using experimental data. Compared to a system relying solely on time domain measurements, the results suggest that the robustness to parameter changes is increased while the tracking accuracy is enhanced by 50% or more when 512 particles are used. △ Less

Submitted 19 August, 2014; originally announced August 2014.