Showing 1–39 of 39 results for author: Jana, P

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

RLSF: Reinforcement Learning via Symbolic Feedback

Authors: Piyush Jha, Prithwish Jana, Arnav Arora, Vijay Ganesh

Abstract: In recent years, large language models (LLMs) have had a dramatic impact on various sub-fields of AI, most notably on natural language understanding tasks. However, there is widespread agreement that the logical reasoning capabilities of contemporary LLMs are, at best, fragmentary (i.e., may work well on some problem instances but fail dramatically on others). While traditional LLM fine-tuning app… ▽ More In recent years, large language models (LLMs) have had a dramatic impact on various sub-fields of AI, most notably on natural language understanding tasks. However, there is widespread agreement that the logical reasoning capabilities of contemporary LLMs are, at best, fragmentary (i.e., may work well on some problem instances but fail dramatically on others). While traditional LLM fine-tuning approaches (e.g., those that use human feedback) do address this problem to some degree, they suffer from many issues, including unsound black-box reward models, difficulties in collecting preference data, and sparse scalar reward values. To address these challenges, we propose a new training/fine-tuning paradigm we refer to as Reinforcement Learning via Symbolic Feedback (RLSF), which is aimed at enhancing the reasoning capabilities of LLMs. In the RLSF setting, the LLM that is being trained/fine-tuned is considered as the RL agent, while the environment is allowed access to reasoning or domain knowledge tools (e.g., solvers, algebra systems). Crucially, in RLSF, these reasoning tools can provide feedback to the LLMs via poly-sized certificates (e.g., proofs), that characterize errors in the LLM-generated object with respect to some correctness specification. The ability of RLSF-based training/fine-tuning to leverage certificate-generating symbolic tools enables sound fine-grained (token-level) reward signals to LLMs, and thus addresses the limitations of traditional reward models mentioned above. Via extensive evaluations, we show that our RLSF-based fine-tuning of LLMs outperforms traditional approaches on two different applications, namely, program synthesis from natural language pseudo-code to programming language (C++) and solving the Game of 24. △ Less

Submitted 26 May, 2024; originally announced May 2024.

Coupled-Band ESSFM for Low-Complexity DBP

Authors: Stella Civelli, Debi Pada Jana, Enrico Forestieri, Marco Secondini

Abstract: We propose a novel digital backpropagation (DBP) technique that combines perturbation theory, subband processing, and splitting ratio optimization. We obtain 0.23 dB, 0.47 dB, or 0.91 dB gains w.r.t. dispersion compensation with only 74, 161, or 681 real multiplications/2D-symbol, improving significantly on existing DBP techniques. We propose a novel digital backpropagation (DBP) technique that combines perturbation theory, subband processing, and splitting ratio optimization. We obtain 0.23 dB, 0.47 dB, or 0.91 dB gains w.r.t. dispersion compensation with only 74, 161, or 681 real multiplications/2D-symbol, improving significantly on existing DBP techniques. △ Less

Submitted 14 May, 2024; originally announced May 2024.

Comments: The paper has been submitted for publication to ECOC 2024

Peculiar magnetism and magneto-transport properties in a non-centrosymmetric self-intercalated van der Waals ferromagnet Cr5Te8

Authors: Banik Rai, Sandip Kumar Kuila, Rana Saha, Chandan De, Sankalpa Hazra, Venkatraman Gopalan, Partha Pratim Jana, Stuart S. P. Parkin, Nitesh Kumar

Abstract: Trigonal Cr5Te8, a self-intercalated van der Waals ferromagnet with an out of plane magnetic anisotropy, has long been known to crystallise in a centrosymmetric structure. Through detailed structural analysis together with second harmonic generation experiments, we show that the compound actually adopts a non-centrosymmetric structure. A large anomalous Hall conductivity of 102 Ω^(-1) cm^(-1) at l… ▽ More Trigonal Cr5Te8, a self-intercalated van der Waals ferromagnet with an out of plane magnetic anisotropy, has long been known to crystallise in a centrosymmetric structure. Through detailed structural analysis together with second harmonic generation experiments, we show that the compound actually adopts a non-centrosymmetric structure. A large anomalous Hall conductivity of 102 Ω^(-1) cm^(-1) at low temperature stems from intrinsic origin, which is larger than any previously reported values in bulk Cr-Te system. In addition, we observe a hump-like feature in the field-dependent Hall resistivity data, resembling a typical topological Hall signal. We demonstrate that the feature is highly tunable and is not related to topological Hall effect even though we observe Néel-type skyrmions by Lorentz transmission electron microscopy which is consistent with the non-centrosymmetric structure of the compound. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: 26 pages, 8 Figures

Reversible-to-irreversible transition of colloidal polycrystals under cyclic athermal quasistatic deformation

Authors: Khushika, Lasse Laurson, Pritam Kumar Jana

Abstract: Cyclic loading on granular packings and amorphous media exhibits a transition from reversible elastic behavior to irreversible plasticity. The present study compares the irreversibility transition and microscopic details of colloidal polycrystals under oscillatory tensile-compressive and shear strain. Under both modes, the systems exhibit a reversible to irreversible transition. However, the strai… ▽ More Cyclic loading on granular packings and amorphous media exhibits a transition from reversible elastic behavior to irreversible plasticity. The present study compares the irreversibility transition and microscopic details of colloidal polycrystals under oscillatory tensile-compressive and shear strain. Under both modes, the systems exhibit a reversible to irreversible transition. However, the strain amplitude at which the transition is observed is larger in the shear strain than in the tensile-compressive mode. The threshold strain amplitude is confirmed by analyzing the dynamical properties, such as mobility and atomic strain (von-Mises shear strain and the volumetric strain). The structural changes are quantified using a hexatic order parameter. Under both modes of deformation, dislocations and grain boundaries in polycrystals disappear, and monocrystals are formed. We also recognize the dislocation motion through grains. The key difference is that strain accumulates diagonally in oscillatory tensile-compressive deformation, whereas, in shear deformation, strain accumulation is along the $x$ or $y$ axis. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Enhanced performance of MoS$_2$/SiO$_2$ field-effect transistors by hexamethyldisilazane (HMDS) encapsulation

Authors: Santu Prasad Jana, Shivangi, Suraina Gupta, Anjan K. Gupta

Abstract: Scalable methods for improving the performance and stability of a field-effect transistor (FET) based on two-dimensional materials are crucial for its real applications. A scalable method of encapsulating the exfoliated MoS$ _{2} $ on SiO$ _{2} $/Si substrate by hexamethyldisilazane (HMDS) is explored here for reducing the influence of interface traps and ambient contaminants. This leads to twenty… ▽ More Scalable methods for improving the performance and stability of a field-effect transistor (FET) based on two-dimensional materials are crucial for its real applications. A scalable method of encapsulating the exfoliated MoS$ _{2} $ on SiO$ _{2} $/Si substrate by hexamethyldisilazane (HMDS) is explored here for reducing the influence of interface traps and ambient contaminants. This leads to twenty-five times reduction in trap density, three times decrease in subthreshold swing, three times increase in the peak field-effect mobility and a drastic reduction in hysteresis. This performance remains nearly the same after several weeks of ambient exposure of the device. This is attributed to the superhydrophobic nature of HMDS and the SiO$_2$ surface hydrophobization by the formation of covalent bonds between the methyl groups of HMDS and silanol groups of SiO$_{2}$. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 5 pages, 5 figures

Gate-tunable crossover between vortex-interaction and pinning dominated regimes in Josephson-coupled Lead-islands on graphene

Authors: Suraina Gupta, Santu Prasad Jana, Rukshana Pervin, Anjan K. Gupta

Abstract: Resistance of a Josephson junction array consisting of randomly distributed lead (Pb) islands on exfoliated single layer graphene shows a broad superconducting transition to zero with an onset temperature close to the transition temperature of bulk Pb. The transition evolves with the back-gate voltage and exhibits two peaks in temperature derivative of resistance. The region above the lower temper… ▽ More Resistance of a Josephson junction array consisting of randomly distributed lead (Pb) islands on exfoliated single layer graphene shows a broad superconducting transition to zero with an onset temperature close to the transition temperature of bulk Pb. The transition evolves with the back-gate voltage and exhibits two peaks in temperature derivative of resistance. The region above the lower temperature peak is found to be well described by Berezinskii-Kosterlitz-Thouless model of thermal unbinding of vortex anti-vortex pairs while that below this peak fits well with the Ambegaokar- Halperin model of thermally-activated phase slip or vortex motion in Josephson junction arrays. Thus a gate-tunable crossover between interaction and pinning dominated vortices is inferred as the Josephson energy, dictating the pinning potential magnitude, increases with cooling while the effective screening length, dictating the range of inter-vortex interaction, reduces. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Comments: 8 pages, 6 figures

Radiation Hardness of MALTA2 Monolithic CMOS Sensors on Czochralski Substrates

Authors: Milou van Rijnbach, Dumitru Vlad Berlea, Valerio Dao, Martin Gaži, Phil Allport, Ignacio Asensi Tortajada, Prafulla Behera, Daniela Bortoletto, Craig Buttar, Florian Dachs, Ganapati Dash, Dominik Dobrijević, Lucian Fasselt, Leyre Flores Sanz de Acedo, Andrea Gabrielli, Vicente González, Giuliano Gustavino, Pranati Jana, Heinz Pernegger, Petra Riedler, Heidi Sandaker, Carlos Solans Sánchez, Walter Snoeys, Tomislav Suligoj, Marcos Vázquez Núñez , et al. (4 additional authors not shown)

Abstract: MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) no… ▽ More MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) noise, and optimise the charge collection geometry. Compared to its predecessors, MALTA2 targets the use of a high-resistivity, thick Czochralski (Cz) substrates in order to demonstrate radiation hardness in terms of detection efficiency and timing resolution up to 3E15 1 MeV neq/cm2 with backside metallisation to achieve good propagation of the bias voltage. This manuscript shows the results that were obtained with non-irradiated and irradiated MALTA2 samples on Cz substrates from the CERN SPS test beam campaign from 2021-2023 using the MALTA telescope. △ Less

Submitted 25 August, 2023; originally announced August 2023.

CoTran: An LLM-based Code Translator using Reinforcement Learning with Feedback from Compiler and Symbolic Execution

Authors: Prithwish Jana, Piyush Jha, Haoyang Ju, Gautham Kishore, Aryan Mahajan, Vijay Ganesh

Abstract: In this paper, we present an LLM-based code translation method and an associated tool called CoTran, that translates whole-programs from one high-level programming language to another. Current LLM-based code translation methods lack a training approach to ensure that the translated code reliably compiles or bears substantial functional equivalence to the input code. In our work, we train an LLM vi… ▽ More In this paper, we present an LLM-based code translation method and an associated tool called CoTran, that translates whole-programs from one high-level programming language to another. Current LLM-based code translation methods lack a training approach to ensure that the translated code reliably compiles or bears substantial functional equivalence to the input code. In our work, we train an LLM via reinforcement learning, by modifying the fine-tuning process to incorporate compiler feedback and symbolic execution (symexec)-based equivalence testing feedback that checks for functional equivalence between the input and output programs. The idea is to guide an LLM-in-training, via compiler and symexec-based testing feedback, by letting it know how far it is from producing perfect translations. We report on extensive experiments comparing CoTran with 14 other code translation tools that include human-written transpilers, LLM-based translation tools, and ChatGPT over a benchmark of more than 57,000 Java-Python equivalent pairs, and we show that CoTran outperforms them on relevant metrics such as compilation accuracy (CompAcc) and functional equivalence accuracy (FEqAcc). For example, our tool achieves 48.68% FEqAcc, 76.98% CompAcc for Python-to-Java translation, whereas the nearest competing tool (PLBART-base) only gets 38.26% and 75.77% resp. Also, built upon CodeT5, CoTran achieves +11.23%, +14.89% improvement on FEqAcc and +4.07%, +8.14% on CompAcc for Java-to-Python and Python-to-Java translation resp. △ Less

Submitted 16 January, 2024; v1 submitted 11 June, 2023; originally announced June 2023.

ACM Class: I.2.7; I.2.5; D.2

Reducing Opinion Echo-Chambers by Intelligent Placement of Moderate-Minded Agents

Authors: Prithwish Jana, Romit Roy Choudhury, Niloy Ganguly

Abstract: In the era of social media, people frequently share their own opinions online on various issues and also in the way, get exposed to others' opinions. Be it for selective exposure of news feed recommendation algorithms or our own inclination to listen to opinions that support ours, the result is that we get more and more exposed to opinions closer to ours. Further, any population is inherently hete… ▽ More In the era of social media, people frequently share their own opinions online on various issues and also in the way, get exposed to others' opinions. Be it for selective exposure of news feed recommendation algorithms or our own inclination to listen to opinions that support ours, the result is that we get more and more exposed to opinions closer to ours. Further, any population is inherently heterogeneous i.e. people will hold a varied range of opinions regarding a topic and showcase a varied range of openness to get influenced by others. In this paper, we demonstrate the different behavior put forward by open- and close-minded agents towards an issue, when allowed to freely intermix and communicate. We have shown that the intermixing among people leads to formation of opinion echo chambers i.e. a small closed network of people who hold similar opinions and are not affected by opinions of people outside the network. Echo chambers are evidently harmful for a society because it inhibits free healthy communication among all and thus, prevents exchange of opinions, spreads misinformation and increases extremist beliefs. This calls for reduction in echo chambers, because a total consensus of opinion is neither possible nor is welcome. We show that the number of echo chambers depends on the number of close-minded agents and cannot be lessened by increasing the number of open-minded agents. We identify certain 'moderate'-minded agents, who possess the capability of manipulating and reducing the number of echo chambers. The paper proposes an algorithm for intelligent placement of moderate-minded agents in the opinion-time spectrum by which the opinion echo chambers can be maximally reduced. With various experimental setups, we demonstrate that the proposed algorithm fares well when compared to placement of other agents (open- or close-minded) and random placement of 'moderate'-minded agents. △ Less

Submitted 21 April, 2023; originally announced April 2023.

ACM Class: J.4

Blocking transition of interface traps in MoS$_2$-on-SiO$_2$ FETs

Authors: Santu Prasad Jana, Suraina Gupta, Anjan K. Gupta

Abstract: Electrical conductivity with gate-sweep in a few layer MoS$_2$-on-SiO$_2$ field-effect-transistor shows an abrupt reduction in hysteresis when cooled. The hysteresis and time dependent conductivity of the MoS$_2$ channel are modeled using the dynamics of interface traps' occupancy. The reduction in hysteresis is found to be steepest at a blocking temperature near 225 K. This is attributed to the i… ▽ More Electrical conductivity with gate-sweep in a few layer MoS$_2$-on-SiO$_2$ field-effect-transistor shows an abrupt reduction in hysteresis when cooled. The hysteresis and time dependent conductivity of the MoS$_2$ channel are modeled using the dynamics of interface traps' occupancy. The reduction in hysteresis is found to be steepest at a blocking temperature near 225 K. This is attributed to the interplay between thermal and barrier energies and fitted using a distribution of the latter. Further, the charge stored in the blocked traps is programmed at low temperatures by cooling under suitable gate voltage. Thus the threshold gate-voltage in nearly non-hysteretic devices at 80 K temperature is reversibly controlled over a wide range. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Comments: 14 pages, 13 figures

Journal ref: Phys. Rev. B 108, 195411 (2023)

Relaxation dynamics in amorphous alloys under asymmetric cyclic shear deformation

Authors: Pritam Kumar Jana, Nikolai V. Priezjev

Abstract: The influence of cyclic loading and glass stability on structural relaxation and yielding transition in amorphous alloys was investigated using molecular dynamics simulations. We considered a binary mixture cooled deep into the glass phase and subjected to cyclic shear deformation where strain varies periodically but remains positive. We found that rapidly cooled glasses under asymmetric cyclic sh… ▽ More The influence of cyclic loading and glass stability on structural relaxation and yielding transition in amorphous alloys was investigated using molecular dynamics simulations. We considered a binary mixture cooled deep into the glass phase and subjected to cyclic shear deformation where strain varies periodically but remains positive. We found that rapidly cooled glasses under asymmetric cyclic shear gradually evolve towards states with lower potential energy and finite stress at zero strain. At the strain amplitude just below a critical value, the rescaled distributions of nonaffine displacements converge to a power-law decay with an exponent of about -2 upon increasing number of cycles. By contrast, more stable glasses yield at lower strain amplitudes, and the yielding transition can be delayed for hundreds of cycles when the strain amplitude is near a critical value. These results can be useful for the design of novel thermo-mechanical processing methods to improve mechanical and physical properties of metallic glasses. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 22 pages, 8 figures

Journal ref: Journal of Non-Crystalline Solids 600, 121996 (2023)

Scheduling Virtual Conferences Fairly: Achieving Equitable Participant and Speaker Satisfaction

Authors: Gourab K. Patro, Prithwish Jana, Abhijnan Chakraborty, Krishna P. Gummadi, Niloy Ganguly

Abstract: Recently, almost all conferences have moved to virtual mode due to the pandemic-induced restrictions on travel and social gathering. Contrary to in-person conferences, virtual conferences face the challenge of efficiently scheduling talks, accounting for the availability of participants from different timezones and their interests in attending different talks. A natural objective for conference or… ▽ More Recently, almost all conferences have moved to virtual mode due to the pandemic-induced restrictions on travel and social gathering. Contrary to in-person conferences, virtual conferences face the challenge of efficiently scheduling talks, accounting for the availability of participants from different timezones and their interests in attending different talks. A natural objective for conference organizers is to maximize efficiency, e.g., total expected audience participation across all talks. However, we show that optimizing for efficiency alone can result in an unfair virtual conference schedule, where individual utilities for participants and speakers can be highly unequal. To address this, we formally define fairness notions for participants and speakers, and derive suitable objectives to account for them. As the efficiency and fairness objectives can be in conflict with each other, we propose a joint optimization framework that allows conference organizers to design schedules that balance (i.e., allow trade-offs) among efficiency, participant fairness and speaker fairness objectives. While the optimization problem can be solved using integer programming to schedule smaller conferences, we provide two scalable techniques to cater to bigger conferences. Extensive evaluations over multiple real-world datasets show the efficacy and flexibility of our proposed approaches. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Comments: In proceedings of the Thirty-first Web Conference (WWW-2022). arXiv admin note: text overlap with arXiv:2010.14624

Recent Trends in 2D Object Detection and Applications in Video Event Recognition

Authors: Prithwish Jana, Partha Pratim Mohanta

Abstract: Object detection serves as a significant step in improving performance of complex downstream computer vision tasks. It has been extensively studied for many years now and current state-of-the-art 2D object detection techniques proffer superlative results even in complex images. In this chapter, we discuss the geometry-based pioneering works in object detection, followed by the recent breakthroughs… ▽ More Object detection serves as a significant step in improving performance of complex downstream computer vision tasks. It has been extensively studied for many years now and current state-of-the-art 2D object detection techniques proffer superlative results even in complex images. In this chapter, we discuss the geometry-based pioneering works in object detection, followed by the recent breakthroughs that employ deep learning. Some of these use a monolithic architecture that takes a RGB image as input and passes it to a feed-forward ConvNet or vision Transformer. These methods, thereby predict class-probability and bounding-box coordinates, all in a single unified pipeline. Two-stage architectures on the other hand, first generate region proposals and then feed it to a CNN to extract features and predict object category and bounding-box. We also elaborate upon the applications of object detection in video event recognition, to achieve better fine-grained video classification performance. Further, we highlight recent datasets for 2D object detection both in images and videos, and present a comparative performance summary of various state-of-the-art object detection techniques. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: Book chapter: P Jana and PP Mohanta, Recent Trends in 2D Object Detection and Applications in Video Event Recognition, published in Advancement of Deep Learning and its Applications in Object Detection and Recognition, edited by R N Mir et al, 2022, published by River Publishers

Unsupervised Action Localization Crop in Video Retargeting for 3D ConvNets

Authors: Prithwish Jana, Swarnabja Bhaumik, Partha Pratim Mohanta

Abstract: Untrimmed videos on social media or those captured by robots and surveillance cameras are of varied aspect ratios. However, 3D CNNs usually require as input a square-shaped video, whose spatial dimension is smaller than the original. Random- or center-crop** may leave out the video's subject altogether. To address this, we propose an unsupervised video crop** approach by sha** this as a reta… ▽ More Untrimmed videos on social media or those captured by robots and surveillance cameras are of varied aspect ratios. However, 3D CNNs usually require as input a square-shaped video, whose spatial dimension is smaller than the original. Random- or center-crop** may leave out the video's subject altogether. To address this, we propose an unsupervised video crop** approach by sha** this as a retargeting and video-to-video synthesis problem. The synthesized video maintains a 1:1 aspect ratio, is smaller in size and is targeted at video-subject(s) throughout the entire duration. First, action localization is performed on each frame by identifying patches with homogeneous motion patterns. Thus, a single salient patch is pinpointed per frame. But to avoid viewpoint jitters and flickering, any inter-frame scale or position changes among the patches should be performed gradually over time. This issue is addressed with a polyBezier fitting in 3D space that passes through some chosen pivot timestamps and whose shape is influenced by the in-between control timestamps. To corroborate the effectiveness of the proposed method, we evaluate the video classification task by comparing our dynamic crop** technique with random crop** on three benchmark datasets, viz. UCF-101, HMDB-51 and ActivityNet v1.3. The clip and top-1 accuracy for video classification after our crop**, outperform 3D CNN performances for same-sized random-crop inputs, also surpassing some larger random-crop sizes. △ Less

Submitted 22 November, 2021; v1 submitted 14 November, 2021; originally announced November 2021.

Comments: Accepted for Publication in Proceedings of 2021 IEEE Region 10 Conference (TENCON), 7-10 December 2021, Auckland, New Zealand

Event and Activity Recognition in Video Surveillance for Cyber-Physical Systems

Authors: Swarnabja Bhaumik, Prithwish Jana, Partha Pratim Mohanta

Abstract: This chapter aims to aid the development of Cyber-Physical Systems (CPS) in automated understanding of events and activities in various applications of video-surveillance. These events are mostly captured by drones, CCTVs or novice and unskilled individuals on low-end devices. Being unconstrained, these videos are immensely challenging due to a number of quality factors. We present an extensive ac… ▽ More This chapter aims to aid the development of Cyber-Physical Systems (CPS) in automated understanding of events and activities in various applications of video-surveillance. These events are mostly captured by drones, CCTVs or novice and unskilled individuals on low-end devices. Being unconstrained, these videos are immensely challenging due to a number of quality factors. We present an extensive account of the various approaches taken to solve the problem over the years. This ranges from methods as early as Structure from Motion (SFM) based approaches to recent solution frameworks involving deep neural networks. We show that the long-term motion patterns alone play a pivotal role in the task of recognizing an event. Consequently each video is significantly represented by a fixed number of key-frames using a graph-based approach. Only the temporal features are exploited using a hybrid Convolutional Neural Network (CNN) + Recurrent Neural Network (RNN) architecture. The results we obtain are encouraging as they outperform standard temporal CNNs and are at par with those using spatial information along with motion cues. Further exploring multistream models, we conceive a multi-tier fusion strategy for the spatial and temporal wings of a network. A consolidated representation of the respective individual prediction vectors on video and frame levels is obtained using a biased conflation technique. The fusion strategy endows us with greater rise in precision on each stage as compared to the state-of-the-art methods, and thus a powerful consensus is achieved in classification. Results are recorded on four benchmark datasets widely used in the domain of action recognition, namely CCV, HMDB, UCF-101 and KCV. It is inferable that focusing on better classification of the video sequences certainly leads to robust actuation of a system designed for event surveillance and object cum activity tracking. △ Less

Submitted 3 November, 2021; originally announced November 2021.

Comments: This is a preprint of the chapter:S Bhaumik, P Jana, PP Mohanta, Event and Activity Recognition in Video Surveillance for Cyber-Physical Systems, published in Emergence of Cyber Physical System.., edited by KK Singh et al, 2021, Springer reproduced with permission of Springer Nature Switzerland AG. The final authenticated version is available online at http://dx.doi.org/10.1007/978-3-030-66222-6_4

ACM Class: I.2.9; I.2.10; I.4.7; I.4.8; I.5.1; I.5.2; I.5.4

Journal ref: Emergence of Cyber Physical System and IoT in Smart Automation and Robotics. Springer, Cham, 2021. 51-68

AutoDrone: Shortest Optimized Obstacle-Free Path Planning for Autonomous Drones

Authors: Prithwish Jana, Debasish Jana

Abstract: With technological advancement, drone has emerged as unmanned aerial vehicle that can be controlled by humans to fly or reach a destination. This may be autonomous as well, where the drone itself is intelligent enough to find a shortest obstacle-free path to reach the destination from a designated source. Be it a planned smart city or even a wreckage site affected by natural calamity, we may imagi… ▽ More With technological advancement, drone has emerged as unmanned aerial vehicle that can be controlled by humans to fly or reach a destination. This may be autonomous as well, where the drone itself is intelligent enough to find a shortest obstacle-free path to reach the destination from a designated source. Be it a planned smart city or even a wreckage site affected by natural calamity, we may imagine the buildings, any surface-erected structure or other blockage as obstacles for the drone to fly in a straight line-of-sight path. To address such path-planning of drones, the bird's eye-view of the whole landscape is first transformed to a graph of grid-cells, where some are occupied to indicate the obstacles and some are free to indicate the free path. We propose a method to find out the shortest obstacle-free path in the coordinate system guided by GPS. The autonomous drone (AutoDrone) will thus be able to move from one place to another along the shortest path, without colliding into hindrances, while traveling in a two-dimensional space. Heuristics to extend this to long journeys and 3D space are also elaborated. Our approach can be especially beneficial in rescue operations and fast delivery or pick-up in an energy-efficient way, where our algorithm will help in finding out the shortest path and angle along which it should fly. Experiments are done on different scenarios of map layouts and obstacle positions to understand the shortest feasible route, computed by the autonomous drone. △ Less

Submitted 3 December, 2021; v1 submitted 30 October, 2021; originally announced November 2021.

Comments: Published in Proceedings of 2021 International Conference on Computational Intelligence, Data Science and Cloud Computing (IEM-ICDC), Springer Book series "Algorithms for Intelligent Systems", Springer, 2021

A Study on Herd Behavior Using Sentiment Analysis in Online Social Network

Authors: Suchandra Dutta, Dhrubasish Sarkar, Sohom Roy, Dipak K. Kole, Premananda Jana

Abstract: Social media platforms are thriving nowadays, so a huge volume of data is produced. As it includes brief and clear statements, millions of people post their thoughts on microblogging sites every day. This paper represents and analyze the capacity of diverse strategies to volumetric, delicate, and social networks to predict critical opinions from online social networking sites. In the exploration o… ▽ More Social media platforms are thriving nowadays, so a huge volume of data is produced. As it includes brief and clear statements, millions of people post their thoughts on microblogging sites every day. This paper represents and analyze the capacity of diverse strategies to volumetric, delicate, and social networks to predict critical opinions from online social networking sites. In the exploration of certain searching for relevant, the thoughts of people play a crucial role. Social media becomes a good outlet since the last decades to share the opinions globally. Sentiment analysis as well as opinion mining is a tool that is used to extract the opinions or thoughts of the common public. An occurrence in one place, be it economic, political, or social, may trigger large-scale chain public reaction across many other sites in an increasingly interconnected world. This study demonstrates the evaluation of sentiment analysis techniques using social media contents and creating the association between subjectivity with herd behavior and clustering coefficient as well as tries to predict the election result (2021 election in West Bengal). This is an implementation of sentiment analysis targeted at estimating the results of an upcoming election by assessing the public's opinion across social media. This paper also has a short discussion section on the usefulness of the idea in other fields. △ Less

Submitted 25 July, 2021; originally announced August 2021.

Comments: 2021 International Conference on Communication, Control and Information Sciences (ICCISc), Idukki, India

Dynamics and Rheology of Polymer Melts via Hierarchical Atomistic, Coarse-grained, and Slip-spring Simulations

Authors: Alireza F. Behbahani, Ludwig Schneider, Anastassia Rissanou, Anthony Chazirakis, Petra Bačová, Pritam Kumar Jana, Wei Li, Manolis Doxastakis, Patrycja Polińska, Craig Burkhart, Marcus Müller, Vagelis A. Harmandaris

Abstract: A hierarchical (triple scale) simulation methodology is presented for the prediction of the dynamical and rheological properties of high molecular weight entangled polymer melts. The methodology consists of atomistic, moderately coarse-grained (mCG), and highly coarse-grained slip-spring (SLSP) simulations. At the mCG level, a few chemically bonded atoms are lumped into one coarse-grained bead. At… ▽ More A hierarchical (triple scale) simulation methodology is presented for the prediction of the dynamical and rheological properties of high molecular weight entangled polymer melts. The methodology consists of atomistic, moderately coarse-grained (mCG), and highly coarse-grained slip-spring (SLSP) simulations. At the mCG level, a few chemically bonded atoms are lumped into one coarse-grained bead. At this level, the chemical identity of the atomistic system, and the interchain topological constraints (entanglements) are preserved. The mCG potentials are derived by matching local structural distributions of the mCG model to those of the atomistic model through iterative Boltzmann inversion. For matching mCG and atomistic dynamics, the mCG time is scaled by a time scaling factor, which compensates for the lower monomeric friction coefficient of the mCG model than that of the atomistic one. At the SLSP level, multiple Kuhn segments of a polymer chain are represented by one coarse-grained bead. The very soft nonbonded interactions between beads do not prevent chain crossing and, hence, can not capture entanglements. The topological constraints are represented by slip-springs. A compensating pair potential is used in the SLSP model, to keep the static macromolecular properties unaltered upon the introduction of slip-springs. The static and kinetic parameters of the SLSP model are determined based on the lower level simulation models. Particularly, matching the orientational autocorrelation of the end-to-end vector, we determine the number of slip-springs and calibrate the timescale of the SLSP model. As the test case, the hierarchical methodology is applied to $cis$-1,4-polybutadiene (cPB) at 413 K. Dynamical properties of cPB melts are calculated for a broad range of molecular weights. The calculations are compared, and found in good agreement, with experimental data from the literature. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Adaptable DNA interactions regulate surface triggered self assembly

Authors: Roberta Lanfranco, Pritam Kumar Jana, Gilles Bruylants, Pietro Cicuta, Bortolo Matteo Mognetti, Lorenzo Di Michele

Abstract: DNA-mediated multivalent interactions between colloidal particles have been extensively applied for their ability to program bulk phase behaviour and dynamic processes. Exploiting the competition between different types of DNA-DNA bonds, here we experimentally demonstrate the selective triggering of colloidal self-assembly in the presence of a functionalised surface, which induces changes in parti… ▽ More DNA-mediated multivalent interactions between colloidal particles have been extensively applied for their ability to program bulk phase behaviour and dynamic processes. Exploiting the competition between different types of DNA-DNA bonds, here we experimentally demonstrate the selective triggering of colloidal self-assembly in the presence of a functionalised surface, which induces changes in particle-particle interactions. Besides its relevance to the manufacturing of layered materials with controlled thickness, the intrinsic signal-amplification features of the proposed interaction scheme make it valuable for biosensing applications. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Self-assembly of finite-sized colloidal aggregates

Authors: Pritam Kumar Jana, Bortolo Matteo Mognetti

Abstract: One of the challenges of self-assembling finite-sized colloidal aggregates with a sought morphology is the necessity of precisely sorting the position of the colloids at the microscopic scale to avoid the formation of off-target structures. Microfluidic platforms address this problem by loading into single droplets the exact amount of colloids entering the targeted aggregate. Using theory and simu… ▽ More One of the challenges of self-assembling finite-sized colloidal aggregates with a sought morphology is the necessity of precisely sorting the position of the colloids at the microscopic scale to avoid the formation of off-target structures. Microfluidic platforms address this problem by loading into single droplets the exact amount of colloids entering the targeted aggregate. Using theory and simulations, in this paper, we validate a more versatile design allowing us to fabricate different types of finite-sized aggregates, including colloidal molecules or core-shell clusters, starting from finite density suspensions of isotropic colloids in bulk. In our model, interactions between particles are mediated by DNA linkers with mobile tethering points, as found in experiments using DNA oligomers tagged with hydrophobic complexes immersed into supported bilayers. By fine-tuning the strength and the number of the different types of linkers, we prove the possibility of controlling the morphology of the aggregates, in particular, the valency of the molecules and the size of the core-shell clusters. In general, our design shows how multivalent interactions can lead to microphase separation in equilibrium conditions. △ Less

Submitted 30 January, 2020; originally announced January 2020.

Structural relaxation in amorphous materials under cyclic tension-compression loading

Authors: Pritam Kumar Jana, Nikolai V. Priezjev

Abstract: The process of structural relaxation in disordered solids subjected to repeated tension-compression loading is studied using molecular dynamics simulations. The binary glass is prepared by rapid cooling well below the glass transition temperature and then periodically strained at constant volume. We find that the amorphous system is relocated to progressively lower potential energy states during h… ▽ More The process of structural relaxation in disordered solids subjected to repeated tension-compression loading is studied using molecular dynamics simulations. The binary glass is prepared by rapid cooling well below the glass transition temperature and then periodically strained at constant volume. We find that the amorphous system is relocated to progressively lower potential energy states during hundreds of cycles, and the energy levels become deeper upon approaching critical strain amplitude from below. The decrease in potential energy is associated with collective nonaffine rearrangements of atoms, and their rescaled probability distribution becomes independent of the cycle number at sufficiently large time intervals. It is also shown that yielding during startup shear deformation occurs at larger values of the stress overshoot in samples that were cyclically loaded at higher strain amplitudes. These results might be useful for mechanical processing of amorphous alloys in order to reduce their energy and increase chemical resistivity and resistance to crystallization. △ Less

Submitted 30 November, 2019; originally announced December 2019.

Comments: 22 pages, 10 figures

Journal ref: Journal of Non-Crystalline Solids 540, 120098 (2020)

Analyzing User Activities Using Vector Space Model in Online Social Networks

Authors: Dhrubasish Sarkar, Premananda Jana

Abstract: The increasing popularity of internet, wireless technologies and mobile devices has led to the birth of mass connectivity and online interaction through Online Social Networks (OSNs) and similar environments. OSN reflects a social structure consist of a set of individuals and different types of ties like connections, relationships, interactions etc among them and helps its users to connect with th… ▽ More The increasing popularity of internet, wireless technologies and mobile devices has led to the birth of mass connectivity and online interaction through Online Social Networks (OSNs) and similar environments. OSN reflects a social structure consist of a set of individuals and different types of ties like connections, relationships, interactions etc among them and helps its users to connect with their friends and common interest groups, share views and to pass information. Now days the users choose OSN sites as a most preferred place for sharing their updates, different views, posting photographs and would like to make it available for others for viewing, rating and making comments. The current paper aims to explore and analyze the association between the objects (like photographs, posts etc) and its viewers (friends, acquaintances etc) for a given user and to find activity relationship among them by using the TF-IDF scheme of Vector Space Model. After vectorization the vector data has been presented through a weighted graph with various properties. △ Less

Submitted 13 October, 2019; originally announced October 2019.

Entropy-driven impurity-induced nematic-isotropic transition of liquid crystals

Authors: Pritam Kumar Jana, Julien Lam, Nagma Parveen, Mikko J Alava, Lasse Laurson

Abstract: Phase behavior of liquid crystals is of long-standing interest due to numerous applications, with one of the key issues being how the presence of impurities affects the liquid crystalline order. Here we study the orientational order of 4-cyano-4$^{'}$-pentylbiphenyl (5CB) and 4-cyano-4$^{'}$-hexylbiphenyl (6CB) nematic liquid crystals in the presence of varying concentrations of water and n-hexane… ▽ More Phase behavior of liquid crystals is of long-standing interest due to numerous applications, with one of the key issues being how the presence of impurities affects the liquid crystalline order. Here we study the orientational order of 4-cyano-4$^{'}$-pentylbiphenyl (5CB) and 4-cyano-4$^{'}$-hexylbiphenyl (6CB) nematic liquid crystals in the presence of varying concentrations of water and n-hexane molecules serving as impurities, by carrying out both fully atomistic simulations and experiments. Our results reveal that mixing of the impurities (in case of hexane) with the host liquid crystals causes a nematic-to-isotropic phase transition with hexane concentration as the control parameter while demixing (in case of water) results in only weak impurity-induced perturbations to the nematic liquid-crystalline order. We develop a coarse-grained model illustrating the general nature and entropic origin of the mixing-induced phase transition. △ Less

Submitted 12 October, 2019; originally announced October 2019.

Brown Ring Experiment in Virtual Reality

Authors: Prithaj Jana, Emil Joswin

Abstract: Brown Ring Experiment is a very popular test to detect the presence of Nitrate in salts commonly performed in chemical laboratories with supplies of required chemicals. Our work clears out the need for a chemical laboratory and chemicals in order to understand the experiment practically. We have used the technology of Virtual Reality to fulfill this requirement. Our research work can be extensivel… ▽ More Brown Ring Experiment is a very popular test to detect the presence of Nitrate in salts commonly performed in chemical laboratories with supplies of required chemicals. Our work clears out the need for a chemical laboratory and chemicals in order to understand the experiment practically. We have used the technology of Virtual Reality to fulfill this requirement. Our research work can be extensively utilized to create virtual environments for conducting other chemical processes in a virtual environment hence, eliminating the need for a chemical laboratory. This can help students in remote areas with minimal resources to fill in the void of practical experiments they have in their learning process due to space constraints. △ Less

Submitted 2 October, 2019; originally announced October 2019.

Comments: 3 pages, 4 figures

$L$-Topology via Generalised Geometric Logic

Authors: P. Jana

Abstract: This paper introduces a notion of generalised geometric logic. Connections of generalised geometric logic with L-topological system and L-topological space are established. This paper introduces a notion of generalised geometric logic. Connections of generalised geometric logic with L-topological system and L-topological space are established. △ Less

Submitted 24 August, 2019; originally announced September 2019.

MSC Class: 03B52 03B70

Translational and Rotational Dynamics of Colloidal Particles Interacting through Reacting Linkers

Authors: Pritam Kumar Jana, Bortolo Matteo Mognetti

Abstract: Much work has studied effective interactions between micron-sized particles carrying linkers forming reversible, inter-particle linkages. These studies allowed understanding the equilibrium properties of colloids interacting through ligand-receptor interactions. Nevertheless, understanding the kinetics of multivalent interactions remains an open problem. Here, we study how molecular details of the… ▽ More Much work has studied effective interactions between micron-sized particles carrying linkers forming reversible, inter-particle linkages. These studies allowed understanding the equilibrium properties of colloids interacting through ligand-receptor interactions. Nevertheless, understanding the kinetics of multivalent interactions remains an open problem. Here, we study how molecular details of the linkers, such as the reaction rates at which inter-particle linkages form/break, affect the relative dynamics of pairs of cross-linked colloids. Using a simulation method tracking single binding/unbinding events between complementary linkers, we rationalize recent experiments and prove that particles' interfaces can move across each other while being cross-linked. We clarify how, starting from diffusing colloids, the dynamics become arrested when increasing the number of inter-particle linkages or decreasing the reaction rates. Before getting arrested, particles diffuse through rolling motion. The ability to detect rolling motion will be useful to shed new light on host-pathogen interactions. △ Less

Submitted 25 September, 2019; v1 submitted 26 July, 2019; originally announced July 2019.

Comments: v2: version accepted for publication in Phys. Rev. E; v3: two typos in Fig. 2 and Fig. 3 fixed

Journal ref: Phys. Rev. E 100, 060601 (2019)

Nanoscale Liquid Crystal Lubrication Controlled by Surface Structure and Film Composition

Authors: Pritam Kumar Jana, Wei Chen, Mikko J. Alava, Lasse Laurson

Abstract: Liquid crystals have emerged as potential candidates for next-generation lubricants due to their tendency to exhibit long-range ordering. Here, we construct a full atomistic model of 4-cyano-4-hexylbiphenyl (6CB) nematic liquid crystal lubricants mixed with hexane and confined by mica surfaces. We explore the effect of the surface structure of mica, as well as lubricant composition and thickness,… ▽ More Liquid crystals have emerged as potential candidates for next-generation lubricants due to their tendency to exhibit long-range ordering. Here, we construct a full atomistic model of 4-cyano-4-hexylbiphenyl (6CB) nematic liquid crystal lubricants mixed with hexane and confined by mica surfaces. We explore the effect of the surface structure of mica, as well as lubricant composition and thickness, on the nanoscale friction in the system. Our results demonstrate the key role of the structure of the mica surfaces, specifically the positions of potassium ($\mathrm{K}^+$) ions, in determining the nature of sliding friction with monolayer lubricants, including the presence or absence of stick-slip dynamics. With the commensurate setup of confining surfaces, when the grooves created between the periodic $\mathrm{K}^+$ ions are parallel to the sliding direction we observe a lower friction force as compared to the perpendicular situation. Random positions of ions exhibit even smaller friction forces with respect to the previous two cases. For thicker lubrication layers the surface structure becomes less important and we observe a good agreement with the experimental data on bulk viscosity of 6CB and the additive hexane. In case of thicker lubrication layers, friction may still be controlled by tuning the relative concentrations of 6CB and hexane in the mixture. △ Less

Submitted 23 December, 2018; originally announced December 2018.

Journal ref: Phys. Chem. Chem. Phys., 2018,20, 18737-18743

Surface-triggered cascade reactions between DNA linkers direct self-assembly of colloidal crystals of controllable thickness

Authors: Pritam Kumar Jana, Bortolo Matteo Mognetti

Abstract: Functionalizing colloids with reactive DNA linkers is a versatile way of programming self-assembly. DNA selectivity provides direct control over colloid-colloid interactions allowing the engineering of structures such as complex crystals or gels. However, self-assembly of localized and finite structures remains an open problem with many potential applications. In this work, we present a system in… ▽ More Functionalizing colloids with reactive DNA linkers is a versatile way of programming self-assembly. DNA selectivity provides direct control over colloid-colloid interactions allowing the engineering of structures such as complex crystals or gels. However, self-assembly of localized and finite structures remains an open problem with many potential applications. In this work, we present a system in which functionalized surfaces initiate a cascade reaction between linkers leading to self-assembly of crystals with a controllable number of layers. Specifically, we consider colloidal particles functionalized by two families of complementary DNA linkers with mobile anchoring points, as found in experiments using emulsions or lipid bilayers. In bulk, intra-particle linkages formed by pairs of complementary linkers prevent the formation of inter-particle bridges and therefore colloid-colloid aggregation. However, colloids interact strongly with the surface given that the latter can destabilize intra-particle linkages. When in direct contact with the surface, colloids are activated, meaning that they feature more unpaired DNA linkers ready to react. Activated colloids can then capture and activate other colloids from the bulk through the formation of inter-particle linkages. Using simulations and theory, validated by existing experiments, we clarify the thermodynamics of the activation and binding process and explain how particle-particle interactions, within the adsorbed phase, weaken as a function of the distance from the surface. The latter observation underlies the possibility of self-assembling finite aggregates with controllable thickness and flat solid-gas interfaces. Our design suggests a new avenue to fabricate heterogeneous and finite structures. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Two-Phase Change in Thickness and Viscoelasticity of Polyelectrolyte Multilayers Swollen with Ionic Liquid Solution

Authors: Nagma Parveen, Pritam Kumar Jana, Monika Schoenhoff

Abstract: Polyelectrolyte multilayers (PEM) in combination with good electrolyte solvents, e.g., ionic liquids (ILs) are potential candidates for the new generation of electrochemical separators. Swelling PEM with aqueous IL solutions is one way to incorporate IL in PEM. In addition to quantifying the IL uptake in PEM, physical characterization of the swollen PEM is essential for their potential application… ▽ More Polyelectrolyte multilayers (PEM) in combination with good electrolyte solvents, e.g., ionic liquids (ILs) are potential candidates for the new generation of electrochemical separators. Swelling PEM with aqueous IL solutions is one way to incorporate IL in PEM. In addition to quantifying the IL uptake in PEM, physical characterization of the swollen PEM is essential for their potential applications and to uncover the underlying molecular process of the swelling. In this article, thickness and viscoelasticity of PEI(PSS/PADMAC)4PSS and PEI(PSS/PAH)4PSS multilayers were determined upon uptake of aqueous solutions of 1-Ethyl-3methylimidazolium chloride, a water-soluble IL. This was done by employing the Kelvin-Voigt model in combination with the frequency and dissipation shifts measured using quartz crystal microbalance with dissipation technique. The modeled thickness and viscoelasticity of the multilayers change in two phases with increasing IL concentration. In the first phase, a small increase in PEM thickness accompanies a two to three-fold increase in PEM viscoelasticity, whereas the changes are other ways around in the second phase. Two phenomenon contributes to the two-phase changes: 1) the exchange between hydrated ions of IL and in-situ water of PEM influencing the overall ion and water content in PEM and 2) the hydrophobic and electrostatic interactions between incorporated IL and PEM influencing the structural integrity of PEM. △ Less

Submitted 17 November, 2018; originally announced November 2018.

Heyting Algebra and Gödel Algebra vs. various Topological Systems and Esakia Space: a Category Theoretic Study

Authors: Antonio Di Nola, Revaz Grigolia, Purbita Jana

Abstract: In this paper intuitionistic topological system and its properties have been introduced. Categorical interrelationships among Heyting algebra, Gödel algebra, Esakia space and proposed intuitionistic topological systems have also been studied in details. In this paper intuitionistic topological system and its properties have been introduced. Categorical interrelationships among Heyting algebra, Gödel algebra, Esakia space and proposed intuitionistic topological systems have also been studied in details. △ Less

Submitted 3 May, 2020; v1 submitted 2 July, 2018; originally announced July 2018.

Comments: Accepted for publication in Azerbijan Journal of Mathematics

MSC Class: 06D20

Fuzzy $α$-cut and related structures

Authors: Purbita Jana, Mihir K. Chakraborty

Abstract: This paper deals with a new notion called fuzzy $α$-cut and its properties. A notion called localic frame is also introduced. Algebraic structures arising out of the family of fuzzy $α$-cuts have been investigated. It will be seen that this family forms a localic frame. Some significance and usefulness of fuzzy $α$-cuts are discussed. This paper deals with a new notion called fuzzy $α$-cut and its properties. A notion called localic frame is also introduced. Algebraic structures arising out of the family of fuzzy $α$-cuts have been investigated. It will be seen that this family forms a localic frame. Some significance and usefulness of fuzzy $α$-cuts are discussed. △ Less

Submitted 4 June, 2018; originally announced June 2018.

MSC Class: 03B52

Steric interactions between mobile ligands facilitate complete wrap** in passive endocytosis

Authors: Lorenzo Di Michele, Pritam Kumar Jana, Bortolo Matteo Mognetti

Abstract: Receptor-mediated endocytosis is an ubiquitous process through which cells internalize biological or synthetic nanoscale objects, including viruses, unicellular parasites, and nanomedical vectors for drug or gene delivery. In passive endocytosis the cell plasma membrane wraps around the "invader" particle driven by ligand-receptor complexation. By means of theory and numerical simulations, here we… ▽ More Receptor-mediated endocytosis is an ubiquitous process through which cells internalize biological or synthetic nanoscale objects, including viruses, unicellular parasites, and nanomedical vectors for drug or gene delivery. In passive endocytosis the cell plasma membrane wraps around the "invader" particle driven by ligand-receptor complexation. By means of theory and numerical simulations, here we demonstrate how particles decorated by freely diffusing and non-mutually-interacting (ideal) ligands are significantly more difficult to wrap than those where ligands are either immobile or interact sterically with each other. Our model rationalizes the relationship between uptake mechanism and structural details of the invader, such as ligand size, mobility and ligand/receptor affinity, providing a comprehensive picture of pathogen endocytosis and hel** the rational design of efficient drug delivery vectors. △ Less

Submitted 21 August, 2018; v1 submitted 11 August, 2017; originally announced August 2017.

Comments: Updated version of the manuscript. Accepted for publication in PRE

Journal ref: Phys. Rev. E 98, 032406 (2018)

Categorical Accommodation of Graded Fuzzy Topological System, Graded Frame and Fuzzy Topological Space with Graded inclusion

Authors: Purbita Jana, Mihir K. Chakraborty

Abstract: A detailed study of graded frame, graded fuzzy topological system and fuzzy topological space with graded inclusion is already done in our earlier paper. The notions of graded fuzzy topological system and fuzzy topological space with graded inclusion were obtained via fuzzy geometric logic with graded con- sequence. As an off shoot the notion of graded frame has been developed. This paper deals wi… ▽ More A detailed study of graded frame, graded fuzzy topological system and fuzzy topological space with graded inclusion is already done in our earlier paper. The notions of graded fuzzy topological system and fuzzy topological space with graded inclusion were obtained via fuzzy geometric logic with graded con- sequence. As an off shoot the notion of graded frame has been developed. This paper deals with a detailed categorical study of graded frame, graded fuzzy topological system and fuzzy topological space with graded inclusion and their interrelation. △ Less

Submitted 20 April, 2017; originally announced April 2017.

A study of the interrelation between fuzzy topological systems and logic

Authors: Purbita Jana

Abstract: The major part of this thesis deals with fuzzy geometric logic and fuzzy geometric logic with graded consequence. The first chapter mainly contains the concept of topological system introduced by S. Vickers in 1989. In Chapter 2 the notion of fuzzy topological system is introduced and categorical relationship with fuzzy topology and frame is discussed in detail. Also this chapter contains some met… ▽ More The major part of this thesis deals with fuzzy geometric logic and fuzzy geometric logic with graded consequence. The first chapter mainly contains the concept of topological system introduced by S. Vickers in 1989. In Chapter 2 the notion of fuzzy topological system is introduced and categorical relationship with fuzzy topology and frame is discussed in detail. Also this chapter contains some methodology to make new fuzzy topological systems from the old one.Chapter 3 provides a generalization of fuzzy topological system which shall be called L topological system and categorical relationships with appropriate topological space and frame. Furthermore, two ways of constructing subspaces and subsystems of an L topological space and an L topological system are respectively provided.Chapter 4 deals with the concept of variable basis fuzzy topological space on fuzzy sets and contains a new notion of variable basis fuzzy topological systems whose underlying sets are fuzzy sets. In this chapter categorical relationship between space and system is established. Chapter 5 contains a different proof of one kind of generalized stone duality, which was done directly by Maruyama, introducing a notion of n fuzzy Boolean system. The last two chapters, Chapter 6 and Chapter 7 deal the ultimate objective. Chapter 6 deals with the question- From which logic fuzzy topology can be studied?. To answer this, the notion of fuzzy geometric logic is invented. △ Less

Submitted 22 September, 2016; v1 submitted 13 September, 2016; originally announced September 2016.

Comments: Ph.D. Thesis

Reference Physics Design for 1 GeV Injector Linac and Accumulator Ring for Indian Spallation Neutron Source

Authors: Amalendu Sharma, Arup Ratan Jana, Chirag Bhai Patidar, Mukesh Kumar Pal, Nita Kulkarni, Pradeep Kumar Goyal, Prasanta Kumar Jana, Rahul Gaur, Ram Prakash, Rinky Dhingra, Urmila Singh, Vinit Kumar

Abstract: As a part of the ongoing XIIth plan project titled "R&D activities for high energy proton linac based spallation neutron source", the work on physics design of various subsystems of the injector linac and accumulator ring has been taken up at RRCAT, Indore. For the 1 GeV H- injector linac, physics design studies of individual systems have been completed, and the end to end beam dynamics simulation… ▽ More As a part of the ongoing XIIth plan project titled "R&D activities for high energy proton linac based spallation neutron source", the work on physics design of various subsystems of the injector linac and accumulator ring has been taken up at RRCAT, Indore. For the 1 GeV H- injector linac, physics design studies of individual systems have been completed, and the end to end beam dynamics simulation studies have been performed to ensure that the stringent beam dynamics criteria are satisfied for the optimized lattice. Physics design studies to optimize the linear lattice of the accumulator ring have also been completed. The design studies for the beam transport lines from the injector linac to the accumulator ring, and from the accumulator ring to target are currently in progress. This report describes the physics design of various systems of the injector linac and the accumulator ring. △ Less

Submitted 3 October, 2016; v1 submitted 15 September, 2016; originally announced September 2016.

Comments: 67 pages, 89 figures and 34 tables

A GA based approach for task scheduling in multi-cloud environment

Authors: Tripti Tanaya Tejaswi, Md Azharuddin, P. K. Jana

Abstract: In multi-cloud environment, task scheduling has attracted a lot of attention due to NP-Complete nature of the problem. Moreover, it is very challenging due to heterogeneity of the cloud resources with varying capacities and functionalities. Therefore, minimizing the makespan for task scheduling is a challenging issue. In this paper, we propose a genetic algorithm (GA) based approach for solving ta… ▽ More In multi-cloud environment, task scheduling has attracted a lot of attention due to NP-Complete nature of the problem. Moreover, it is very challenging due to heterogeneity of the cloud resources with varying capacities and functionalities. Therefore, minimizing the makespan for task scheduling is a challenging issue. In this paper, we propose a genetic algorithm (GA) based approach for solving task scheduling problem. The algorithm is described with innovative idea of fitness function derivation and mutation. The proposed algorithm is exposed to rigorous testing using various benchmark datasets and its performance is evaluated in terms of total makespan. △ Less

Submitted 27 November, 2015; originally announced November 2015.

Higher order two-mode and multi-mode entanglement in Raman processes

Authors: Sandip Kumar Giri, Biswajit Sen, Anirban Pathak, Paresh Chandra Jana

Abstract: The existence of higher order entanglement in the stimulated and spontaneous Raman processes is established using the perturbative solutions of the Heisenberg equations of motion for various field modes that are obtained using the Sen-Mandal technique and a fully quantum mechanical Hamiltonian that describes the stimulated and spontaneous Raman processes. Specifically, the perturbative Sen-Mandal… ▽ More The existence of higher order entanglement in the stimulated and spontaneous Raman processes is established using the perturbative solutions of the Heisenberg equations of motion for various field modes that are obtained using the Sen-Mandal technique and a fully quantum mechanical Hamiltonian that describes the stimulated and spontaneous Raman processes. Specifically, the perturbative Sen-Mandal solutions are exploited here to show the signature of the higher order two-mode and multi-mode entanglement. In some special cases, we have also observed higher order entanglement in the partially spontaneous Raman processes. Further, it is shown that the depth of the nonclassicality indicators (parameters) can be manipulated by the specific choice of coupling constants, and it is observed that the depth of nonclassicality parameters increases with the order. △ Less

Submitted 21 September, 2015; v1 submitted 27 August, 2015; originally announced August 2015.

Comments: 9 pages, 5 figures. arXiv admin note: text overlap with arXiv:1301.0286

Journal ref: Phys. Rev. A 93, 012340 (2016)

Deposition of model chains on surfaces: anomalous relation between flux and stability

Authors: Pritam Kumar Jana, Andreas Heuer

Abstract: Model chains are studied via Monte Carlo simulations which are deposited with a fixed flux on a substrate. They may represent, e.g., stiff lipophilic chains with an head group and tail groups mimicking the alkyl chain. After some subsequent fixed simulation time we determine the final energy as a function of flux and temperature. Surprisingly, in some range of temperature and flux the final energy… ▽ More Model chains are studied via Monte Carlo simulations which are deposited with a fixed flux on a substrate. They may represent, e.g., stiff lipophilic chains with an head group and tail groups mimicking the alkyl chain. After some subsequent fixed simulation time we determine the final energy as a function of flux and temperature. Surprisingly, in some range of temperature and flux the final energy increases with decreasing flux. The physical origin of this counterintuitive observation is elucidated. In contrast, when performing equivalent cooling experiments no such anomaly is observed. Furthermore, it is elaborated whether flux experiments give rise to configurations with lower energies as compared to cooling experiments. These results are related to recent experiments by the Ediger group where very stable configurations of glass-forming systems have been generated via flux experiments. △ Less

Submitted 27 February, 2013; originally announced February 2013.