Showing 1–50 of 70 results for author: Jaiswal, P

Harnessing Smartwatch Microphone Sensors for Cough Detection and Classification

Authors: Pranay Jaiswal, Haroon R. Lone

Abstract: This study investigates the potential of using smartwatches with built-in microphone sensors for monitoring coughs and detecting various cough types. We conducted a study involving 32 participants and collected 9 hours of audio data in a controlled manner. Afterward, we processed this data using a structured approach, resulting in 223 positive cough samples. We further improved the dataset through… ▽ More This study investigates the potential of using smartwatches with built-in microphone sensors for monitoring coughs and detecting various cough types. We conducted a study involving 32 participants and collected 9 hours of audio data in a controlled manner. Afterward, we processed this data using a structured approach, resulting in 223 positive cough samples. We further improved the dataset through augmentation techniques and employed a specialized 1D CNN model. This model achieved an impressive accuracy rate of 98.49% while non-walking and 98.2% while walking, showing smartwatches can detect cough. Moreover, our research successfully identified four distinct types of coughs using clustering techniques. △ Less

Submitted 20 April, 2024; v1 submitted 31 January, 2024; originally announced January 2024.

Comments: 7 pages

Experimental evidence on tonal noise generation and its control in tip-leakage flows

Authors: Prateek Jaiswal, Stephane Moreau

Abstract: The present study is first to provide experimental evidence of tonal noise and acoustic feedback by a stationary airfoil with a tip-gap placed between two side plates. Tones are linked to an aero-acoustic coupling using synchronized measurements between Particle Image Velocimetry and far-field microphone probes. To aid in the correlation analysis, the wall boundary condition on the pressure side o… ▽ More The present study is first to provide experimental evidence of tonal noise and acoustic feedback by a stationary airfoil with a tip-gap placed between two side plates. Tones are linked to an aero-acoustic coupling using synchronized measurements between Particle Image Velocimetry and far-field microphone probes. To aid in the correlation analysis, the wall boundary condition on the pressure side of the airfoil was modified by introducing surface roughness. For tip leakage flows without roughness elements, the far-field acoustic spectra show peaks in the acoustic autospectra. These peaks are present regardless of the flow speed studied. The findings reveal that tones associated with tip-gap extend till 16.5 kHz in a low-noise facility. Roughness alters cross-flow velocity along the airfoil chord, influencing acoustics at matched Reynolds and Mach numbers. Roughness induces cancellation of spectral peaks and changes in the velocity and acoustic pressure correlation pattern between airfoil pressure and suction side. Modal shapes confirm the presence of coherent structures in the tip-gap region, with smooth surfaces exhibiting confined flow instabilities and non-dipolar noise sources around and beyond 10 kHz. At these high frequencies, the sound radiation mechanism can be uniquely attributed to neither a jet-like noise source nor these acoustic peaks can be uniquely attributed to coherent structures in the tip-gap region. On the contrary, coherence between airfoil sides is required for noise peaks, which stresses the importance of diffraction on the airfoil pressure side and acoustic feedback. △ Less

Submitted 18 March, 2024; v1 submitted 26 January, 2024; originally announced January 2024.

Comments: 21 pages, 10 figures

Salt Effects on Ionic Conductivity Mechanisms in Ethylene Carbonate Electrolytes: Interplay of Viscosity and Ion-ion Relaxations

Authors: Hema Teherpuria, Sapta Sindhu Paul Chowdhury, Sridhar Kumar Kannam, Prabhat K. Jaiswal, Santosh Mogurampelly

Abstract: The intricate role of shear viscosity and ion-pair relaxations on ionic conductivity mechanisms and the underlying changes induced by salt concentration ($c$) in organic liquid electrolytes remain poorly understood despite their widespread technological importance. Using molecular dynamics simulations employing nonpolarizable force fields for $c$ ranging between 10$^{-3}$ to 101 M, we show that th… ▽ More The intricate role of shear viscosity and ion-pair relaxations on ionic conductivity mechanisms and the underlying changes induced by salt concentration ($c$) in organic liquid electrolytes remain poorly understood despite their widespread technological importance. Using molecular dynamics simulations employing nonpolarizable force fields for $c$ ranging between 10$^{-3}$ to 101 M, we show that the low and high $c$ regimes of the EC-LiTFSI electrolytes are distinctly characterized by $η\simτ_c^{1/2}$ and $η\simτ_c^{1}$, where $η$ and $τ_c$ are shear viscosity and cation-anion relaxation timescales, respectively. Our extensive simulations and analyses suggest a universal relationship between the ionic conductivity and c as $σ(c)\sim c^αe^{-c/c_{0}} (α>0)$. The proposed relationship convincingly explains the ionic conductivity over a wide range of $c$, where the term $c^α$ accounts for the uncorrelated motion of ions and $e^{-c/c_0}$ captures the salt-induced changes in shear viscosity. Our simulations suggest vehicular mechanism to be dominant at low $c$ regime which transition into a Grotthuss mechanism at high $c$ regime, where structural relaxation is the dominant form of ion transport mechanism. Our findings shed light on some of the fundamental aspects of the ion conductivity mechanisms in liquid electrolytes, offering insights into optimizing the ion transport in EC-LiTFSI electrolytes. △ Less

Submitted 20 January, 2024; originally announced January 2024.

Comments: 6 pages, 5 figures

Generalized Regret Analysis of Thompson Sampling using Fractional Posteriors

Authors: Prateek Jaiswal, Debdeep Pati, Anirban Bhattacharya, Bani K. Mallick

Abstract: Thompson sampling (TS) is one of the most popular and earliest algorithms to solve stochastic multi-armed bandit problems. We consider a variant of TS, named $α$-TS, where we use a fractional or $α$-posterior ($α\in(0,1)$) instead of the standard posterior distribution. To compute an $α$-posterior, the likelihood in the definition of the standard posterior is tempered with a factor $α$. For $α$-TS… ▽ More Thompson sampling (TS) is one of the most popular and earliest algorithms to solve stochastic multi-armed bandit problems. We consider a variant of TS, named $α$-TS, where we use a fractional or $α$-posterior ($α\in(0,1)$) instead of the standard posterior distribution. To compute an $α$-posterior, the likelihood in the definition of the standard posterior is tempered with a factor $α$. For $α$-TS we obtain both instance-dependent $\mathcal{O}\left(\sum_{k \neq i^*} Δ_k\left(\frac{\log(T)}{C(α)Δ_k^2} + \frac{1}{2} \right)\right)$ and instance-independent $\mathcal{O}(\sqrt{KT\log K})$ frequentist regret bounds under very mild conditions on the prior and reward distributions, where $Δ_k$ is the gap between the true mean rewards of the $k^{th}$ and the best arms, and $C(α)$ is a known constant. Both the sub-Gaussian and exponential family models satisfy our general conditions on the reward distribution. Our conditions on the prior distribution just require its density to be positive, continuous, and bounded. We also establish another instance-dependent regret upper bound that matches (up to constants) to that of improved UCB [Auer and Ortner, 2010]. Our regret analysis carefully combines recent theoretical developments in the non-asymptotic concentration analysis and Bernstein-von Mises type results for the $α$-posterior distribution. Moreover, our analysis does not require additional structural properties such as closed-form posteriors or conjugate priors. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Njobvu-AI: An open-source tool for collaborative image labeling and implementation of computer vision models

Authors: Jonathan S. Koning, Ashwin Subramanian, Mazen Alotaibi, Cara L. Appel, Christopher M. Sullivan, Thon Chao, Lisa Truong, Robyn L. Tanguay, Pankaj Jaiswal, Taal Levi, Damon B. Lesmeister

Abstract: Practitioners interested in using computer vision models lack user-friendly and open-source software that combines features to label training data, allow multiple users, train new algorithms, review output, and implement new models. Labeling training data, such as images, is a key step to develo** accurate object detection algorithms using computer vision. This step is often not compatible with… ▽ More Practitioners interested in using computer vision models lack user-friendly and open-source software that combines features to label training data, allow multiple users, train new algorithms, review output, and implement new models. Labeling training data, such as images, is a key step to develo** accurate object detection algorithms using computer vision. This step is often not compatible with many cloud-based services for marking or labeling image and video data due to limited internet bandwidth in many regions of the world. Desktop tools are useful for groups working in remote locations, but users often do not have the capability to combine projects developed locally by multiple collaborators. Furthermore, many tools offer features for labeling data or using pre-trained models for classification, but few allow researchers to combine these steps to create and apply custom models. Free, open-source, and user-friendly software that offers a full suite of features (e.g., ability to work locally and online, and train custom models) is desirable to field researchers and conservationists that may have limited coding skills. We developed Njobvu-AI, a free, open-source tool that can be run on both desktop and server hardware using Node.js, allowing users to label data, combine projects for collaboration and review, train custom algorithms, and implement new computer vision models. The name Njobvu-AI (pronounced N-joh-voo AI), incorporating the Chichewa word for elephant, is inspired by a wildlife monitoring program in Malawi that was a primary impetus for the development of this tool and references similarities between the powerful memory of elephants and properties of computer vision models. △ Less

Submitted 30 August, 2023; originally announced August 2023.

Comments: 13 pages, 6 figures. For code and documentation, see https://github.com/sullichrosu/Njobvu-AI/

Aeroacoustic investigation of airfoil at near stall conditions

Authors: Prateek Jaiswal, Jose Rendón, Stéphane Moreau

Abstract: This paper presents a detailed aeroacoustic investigation of a Controlled-Diffusion airfoil at near stall condition. The study aims at answering two research questions: identify the flow mechanism responsible for separation noise for an airfoil near stall conditions and whether the noise is generated by a dipole for airfoil close to stall and can be quantified by Amiet's diffraction theory. The st… ▽ More This paper presents a detailed aeroacoustic investigation of a Controlled-Diffusion airfoil at near stall condition. The study aims at answering two research questions: identify the flow mechanism responsible for separation noise for an airfoil near stall conditions and whether the noise is generated by a dipole for airfoil close to stall and can be quantified by Amiet's diffraction theory. The study uses synchronized PIV, RMP and far-field microphone measurements to perform experiments at two chord based Reynolds numbers of about 150,000 and 250,000. The results show that when the airfoil is placed at a higher angle of attack, such as $15^{\circ}$, strong amplification of flow disturbance is seen, resulting in the rolling up of the shear layer in the aft-region of the airfoil, forming large coherent structures. While these rollers play a central role in the increase in noise due to flow separation, the flap** of shear layer does not contribute to the separation noise. The present study conclusively shows that separation noise is dipolar in nature, and that the quadrupolar contribution for low-speed airfoils at near-stall conditions can be neglected. However, the increase in flow disturbances measured close to the trailing-edge of the airfoil implies that the assumption of small amplitude disturbance is no longer valid, which is the central premise of the thin linearized airfoil theory. Outside the frequency range at which flow separation operates, Amiet's theory is able to predict the far-field noise even at high angles of attack. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Comments: 45 pages, 25 figures

Ion Transport Mechanisms in Pectin-containing EC-LiTFSI Electrolytes

Authors: Sipra Mohapatra, Hema Teherpuria, Sapta Sindhu Paul Chowdhury, Suleman Jalilahmad Ansari, Prabhat K Jaiswal, Roland R. Netz, Santosh Mogurampelly

Abstract: Using all-atom molecular dynamics simulations, we report the structure and ion transport characteristics of a new class of solid polymer electrolytes that contain biodegradable and mechanically stable biopolymer pectin. We simulate a highly conducting ethylene carbonate (EC) as a solvent for lithium-trifluoromethanesulfonimide (LiTFSI) salt containing different weight percentages of pectin. Our si… ▽ More Using all-atom molecular dynamics simulations, we report the structure and ion transport characteristics of a new class of solid polymer electrolytes that contain biodegradable and mechanically stable biopolymer pectin. We simulate a highly conducting ethylene carbonate (EC) as a solvent for lithium-trifluoromethanesulfonimide (LiTFSI) salt containing different weight percentages of pectin. Our simulations reveal that the pectin chains reduce the coordination numbers of lithium ions around the counterions (and vice-versa) because of stronger lithium-pectin interactions compared to lithium-TFSI interactions. Further, the pectin is found to promote smaller ionic aggregates over larger ones, contrary to results typically reported for liquid and polymer electrolytes. We observe that the loading of pectin in EC-LiTFSI electrolytes increases the viscosity ($η$) and relaxation timescales ($τ_c$), indicating higher mechanical stability and, consequently, the mean squared displacements, diffusion coefficients (D), and the Nernst-Einstein conductivity ($σ_{NE}$) decrease. Interestingly, while the lithium diffusivities are related to the ion-pair relaxation timescales as $D_+\sim τ_c^{-3.1}$, the TFSI$^-$ diffusivities exhibit excellent correlations with ion-pair relaxation timescales as $D_-\sim τ_c^{-0.95}$. On the other hand, the NE conductivities are dictated by distinct transport mechanisms and scales with ion-pair relaxation timescale as $σ_{NE}\sim τ_c^{-1.85}$. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Non-equilibrium wet-dry cycling acts as a catalyst for chemical reactions

Authors: Ivar Svalheim Haugerud, Pranay Jaiswal, Christoph A. Weber

Abstract: Recent experimental studies suggest that wet-dry cycles and coexisting phases can each strongly alter chemical processes. The mechanisms of why and to which degree chemical processes are altered when subject to evaporation and condensation are unclear. To close this gap, we developed a theoretical framework for non-dilute chemical reactions subject to non-equilibrium conditions of evaporation and… ▽ More Recent experimental studies suggest that wet-dry cycles and coexisting phases can each strongly alter chemical processes. The mechanisms of why and to which degree chemical processes are altered when subject to evaporation and condensation are unclear. To close this gap, we developed a theoretical framework for non-dilute chemical reactions subject to non-equilibrium conditions of evaporation and condensation. We find that such conditions can change the half-time of the product's yield by more than an order of magnitude, depending on the substrate-solvent interaction. We show that the cycle frequency strongly affects the chemical turnover when maintaining the system out of equilibrium by wet-dry cycles. There exists a resonance behavior in the cycle frequency where the turnover is maximal. This resonance behavior enables wet-dry cycles to select specific chemical reactions suggesting a potential mechanism for chemical evolution in prebiotic soups at early Earth. △ Less

Submitted 15 December, 2023; v1 submitted 27 April, 2023; originally announced April 2023.

Towards decoupling the effects of permeability and roughness on turbulent boundary layers

Authors: D. D. Wangsawijaya, P. Jaiswal, B. Ganapathisubramani

Abstract: Boundary layer flow over a realistic porous wall might contain both the effects of wall-permeability and wall-roughness. These two effects are typically examined in the context of a rough-wall flow, i.e., by defining a ``roughness'' length or equivalent to capture the effect of the surface on momentum deficit/drag. In this work, we examine the hypothesis of Esteban et al. (2022), that a turbulent… ▽ More Boundary layer flow over a realistic porous wall might contain both the effects of wall-permeability and wall-roughness. These two effects are typically examined in the context of a rough-wall flow, i.e., by defining a ``roughness'' length or equivalent to capture the effect of the surface on momentum deficit/drag. In this work, we examine the hypothesis of Esteban et al. (2022), that a turbulent boundary layer over a porous wall could be modelled as a superposition of the roughness effects on the permeability effects by using independently obtained information on permeability and roughness. We carry out wind tunnel experiments at high Reynolds number ($14400 \leq Re_τ \leq 33100$) on various combinations of porous walls where different roughnesses are overlaid over a given permeable wall. Measurements are also conducted on the permeable wall as well as the rough walls independently to obtain the corresponding lengthscales. Analysis of mean flow data across all these measurements suggests that an empirical formulation can be obtained where the momentum deficit ($ΔU^+$) is modelled as a combination of independently obtained roughness and permeability lengthscales. This formulation assumes the presence of outer-layer similarity across these different surfaces, which is shown to be valid at high Reynolds numbers. Finally, this decoupling approach is equivalent to the area-weighted power-mean of the respective permeability and roughness lengthscales, consistent with the approach recently suggested by Hutchins et al. (2023) to capture the effects of heterogeneous rough surfaces. △ Less

Submitted 28 February, 2023; originally announced February 2023.

Comments: Under review for publication in JFM Rapids

Journal ref: J. Fluid Mech. (2023) 967:R2

Effects of porous substrates on the structure of turbulent boundary layers

Authors: Prateek Jaiswal, Bharathram Ganapathisubramani

Abstract: Three different porous substrates (with different pore sizes, s, and permeabilities, K) are used to examine their effect on the structure of boundary layer flow over them. The flow is characterised with single-point hot-wire measurements as well as planar Particle Image Velocimetry. In order to elucidate differences in shallow and deep flows past porous substrate, foams with two different thicknes… ▽ More Three different porous substrates (with different pore sizes, s, and permeabilities, K) are used to examine their effect on the structure of boundary layer flow over them. The flow is characterised with single-point hot-wire measurements as well as planar Particle Image Velocimetry. In order to elucidate differences in shallow and deep flows past porous substrate, foams with two different thickness (h) are used (for all three substrates). A wide range of Friction Reynolds number (2000< Retau < 15000) and Permeability based Reynolds number (1<ReK< 50) are attained. For substrates with ReK=1, the flow behaviour remains similar to flow over impermeable smooth walls and as such Townsend's hypothesis remains valid. In contrast, a substantial reduction in velocity disturbances and associated length scales is achieved for permeable (ReK>1) and dense (relative to viscous scales) foam at the thick substrate limit (h/s>10), which leads to the breakdown of outer-layer similarity. As porosity is increased, a thin substrate limit is reached (h/s), and the foam becomes sparse relative to viscous scales (s+ > 100). For such foams, the flow conforms to outer-layer similarity and is more akin to flow over rough surfaces. Such substrates are unable to attenuate velocity disturbances and the dependence of substrate thickness (h/s) on spectral energy content of turbulent fluctuations ceases to exist. The present study shows that transition from thick to thin substrate flow behavior depends not only on thickness-to-pore ratio (h/s) but also on substrate density relative to viscous scales of the flow. △ Less

Submitted 12 January, 2024; v1 submitted 10 January, 2023; originally announced January 2023.

Comments: 29 pages, 14 figures

Facial De-morphing: Extracting Component Faces from a Single Morph

Authors: Sudipta Banerjee, Prateek Jaiswal, Arun Ross

Abstract: A face morph is created by strategically combining two or more face images corresponding to multiple identities. The intention is for the morphed image to match with multiple identities. Current morph attack detection strategies can detect morphs but cannot recover the images or identities used in creating them. The task of deducing the individual face images from a morphed face image is known as… ▽ More A face morph is created by strategically combining two or more face images corresponding to multiple identities. The intention is for the morphed image to match with multiple identities. Current morph attack detection strategies can detect morphs but cannot recover the images or identities used in creating them. The task of deducing the individual face images from a morphed face image is known as \textit{de-morphing}. Existing work in de-morphing assume the availability of a reference image pertaining to one identity in order to recover the image of the accomplice - i.e., the other identity. In this work, we propose a novel de-morphing method that can recover images of both identities simultaneously from a single morphed face image without needing a reference image or prior information about the morphing process. We propose a generative adversarial network that achieves single image-based de-morphing with a surprisingly high degree of visual realism and biometric similarity with the original face images. We demonstrate the performance of our method on landmark-based morphs and generative model-based morphs with promising results. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Universal Fast Mode and Potential-dependent Regimes in Wetting Kinetics

Authors: Syed Shuja Hasan Zaidi, Prabhat K. Jaiswal, Madhu Priya, Sanjay Puri

Abstract: We present simulation results from a comprehensive molecular dynamics (MD) study of surface-directed spinodal decomposition (SDSD) in unstable symmetric binary mixtures at wetting surfaces. We consider long-ranged and short-ranged surface fields to investigate the early-stage wetting kinetics. The attractive part of the long-ranged potential is of the form $V(z) \sim z^{-n}$, where $z$ is the dist… ▽ More We present simulation results from a comprehensive molecular dynamics (MD) study of surface-directed spinodal decomposition (SDSD) in unstable symmetric binary mixtures at wetting surfaces. We consider long-ranged and short-ranged surface fields to investigate the early-stage wetting kinetics. The attractive part of the long-ranged potential is of the form $V(z) \sim z^{-n}$, where $z$ is the distance from the surface and $n$ is the power-law exponent. We find that the wetting-layer thickness $R_1(t)$ at very early times exhibits a power-law growth with an exponent $α= 1/(n+2)$. It then crosses over to a universal fast-mode regime with $α=3/2$. In contrast, for the short-ranged surface potential, a logarithmic behavior in $R_1(t)$ is observed at initial times. Remarkably, similar rapid growth is seen in this case too. We provide phenomenological arguments to understand these growth laws. Our MD results firmly establish the existence of universal fast-mode kinetics and settle the related controversy. △ Less

Submitted 24 June, 2022; originally announced June 2022.

Comments: 6 pages, 4 figures

Convergence Criteria of a Three Step Scheme under generalized Lipschitz Condition in Banach Spaces

Authors: Akanksha Saxena, J. P. Jaiswal, K. R. Pardasani

Abstract: The goal of this study is to investigate the local convergence of a three-step Newton-Traub technique for solving nonlinear equations in Banach spaces with a convergence rate of five. The first order derivative of a nonlinear operator is assumed to satisfy the generalized Lipschitz condition, i.e. the $κ$-average condition. Furthermore, a few results on the convergence of the same method in Banach… ▽ More The goal of this study is to investigate the local convergence of a three-step Newton-Traub technique for solving nonlinear equations in Banach spaces with a convergence rate of five. The first order derivative of a nonlinear operator is assumed to satisfy the generalized Lipschitz condition, i.e. the $κ$-average condition. Furthermore, a few results on the convergence of the same method in Banach spaces are developed under the assumption that the derivative of the operators satisfies the radius or center Lipschitz condition with a weak $κ$-average, and that $κ$ is a positive integrable function but not necessarily non-decreasing. Our new notion provides a tighter convergence analysis without the need for new circumstances. As a result, we broaden the applicability of iterative approaches. Theoretical results are supported further by illuminating examples. The existence and uniqueness of the solution $x^*$ are examined in the convergence theorem. In the end, we achieve weaker sufficient convergence criteria and more specific information on the position of the solution than previous efforts requiring the same computational effort. We obtain the convergence theorems as well as some novel results by applying the results to some specific functions for $κ(u)$. A numerical test is carried out to corroborate the hypothesis established in this work. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Comments: arXiv admin note: text overlap with arXiv:2101.01361

Extended Local Convergence for Seventh order method with $ψ$-continuity condition in Banach Spaces

Authors: Akanksha Saxena, J. P. Jaiswal, K. R. Pardasani

Abstract: In this article, the local convergence analysis of the multi-step seventh order method is presented for solving nonlinear equations. The point worth noting in our paper is that our analysis requires a weak hypothesis where the Fréchet derivative of the nonlinear operator satisfies the $ψ$-continuity condition and extends the applicability of the computation when both Lipschitz and Hölder condition… ▽ More In this article, the local convergence analysis of the multi-step seventh order method is presented for solving nonlinear equations. The point worth noting in our paper is that our analysis requires a weak hypothesis where the Fréchet derivative of the nonlinear operator satisfies the $ψ$-continuity condition and extends the applicability of the computation when both Lipschitz and Hölder conditions fail. The convergence in this study is shown under the hypotheses on the first order derivative without involving derivatives of the higher-order. To find a subset of the original convergence domain, a strategy is devised. As a result, the new Lipschitz constants are at least as tight as the old ones, allowing for a more precise convergence analysis in the local convergence case. Some numerical examples are provided to show the performance of the method presented in this contribution over some existing schemes. △ Less

Submitted 12 December, 2021; originally announced December 2021.

Comments: arXiv admin note: substantial text overlap with arXiv:2112.04080

Broadening the convergence domain of Seventh-order method satisfying Lipschitz and Hölder conditions

Authors: Akanksha Saxena, J. P. Jaiswal, K. R. Pardasani

Abstract: In this paper, the local convergence analysis of the multi-step seventh order method is presented for solving nonlinear equations assuming that the first-order Fréchet derivative belongs to the Lipschitz class. The significance of our work is that it avoids the standard practice of Taylor expansion thereby, extends the applicability of the scheme by applying the technique based on the first-order… ▽ More In this paper, the local convergence analysis of the multi-step seventh order method is presented for solving nonlinear equations assuming that the first-order Fréchet derivative belongs to the Lipschitz class. The significance of our work is that it avoids the standard practice of Taylor expansion thereby, extends the applicability of the scheme by applying the technique based on the first-order derivative only. Also, this study provides radii of balls of convergence, the error bounds in terms of distances in addition to the uniqueness of the solution. Furthermore, generalization of this analysis satisfying Hölder continuity condition is provided since it is more relaxed than Lipschitz continuity condition. We have considered some numerical examples and computed the radii of the convergence balls. △ Less

Submitted 7 December, 2021; originally announced December 2021.

Multistart Algorithm for Identifying All Optima of Nonconvex Stochastic Functions

Authors: Prateek Jaiswal, Jeffrey Larson

Abstract: We propose a multistart algorithm to identify all local minima of a constrained, nonconvex stochastic optimization problem. The algorithm uniformly samples points in the domain and then starts a local stochastic optimization run from any point that is the "probabilistically best" point in its neighborhood. Under certain conditions, our algorithm is shown to asymptotically identify all local optima… ▽ More We propose a multistart algorithm to identify all local minima of a constrained, nonconvex stochastic optimization problem. The algorithm uniformly samples points in the domain and then starts a local stochastic optimization run from any point that is the "probabilistically best" point in its neighborhood. Under certain conditions, our algorithm is shown to asymptotically identify all local optima with high probability; this holds even though our algorithm is shown to almost surely start only finitely many local stochastic optimization runs. We demonstrate the performance of an implementation of our algorithm on nonconvex stochastic optimization problems, including identifying optimal variational parameters for the quantum approximate optimization algorithm. △ Less

Submitted 4 January, 2022; v1 submitted 30 August, 2021; originally announced August 2021.

Comments: 18 pages, 6 figures

Bayesian Joint Chance Constrained Optimization: Approximations and Statistical Consistency

Authors: Prateek Jaiswal, Harsha Honnappa, Vinayak A. Rao

Abstract: This paper considers data-driven chance-constrained stochastic optimization problems in a Bayesian framework. Bayesian posteriors afford a principled mechanism to incorporate data and prior knowledge into stochastic optimization problems. However, the computation of Bayesian posteriors is typically an intractable problem, and has spawned a large literature on approximate Bayesian computation. Here… ▽ More This paper considers data-driven chance-constrained stochastic optimization problems in a Bayesian framework. Bayesian posteriors afford a principled mechanism to incorporate data and prior knowledge into stochastic optimization problems. However, the computation of Bayesian posteriors is typically an intractable problem, and has spawned a large literature on approximate Bayesian computation. Here, in the context of chance-constrained optimization, we focus on the question of statistical consistency (in an appropriate sense) of the optimal value, computed using an approximate posterior distribution. To this end, we rigorously prove a frequentist consistency result demonstrating the convergence of the optimal value to the optimal value of a fixed, parameterized constrained optimization problem. We augment this by also establishing a probabilistic rate of convergence of the optimal value. We also prove the convex feasibility of the approximate Bayesian stochastic optimization problem. Finally, we demonstrate the utility of our approach on an optimal staffing problem for an M/M/c queueing model. △ Less

Submitted 30 September, 2022; v1 submitted 23 June, 2021; originally announced June 2021.

On the Local convergence of two-step Newton type Method in Banach Spaces under generalized Lipschitz Conditions

Authors: Akanksha Saxena, J. P. Jaiswal

Abstract: The motive of this paper is to discuss the local convergence of a two-step Newton type method of convergence rate three for solving nonlinear equations in Banach spaces. It is assumed that the first order derivative of nonlinear operator satisfies the generalized Lipschitz i.e. $L$-average condition. Also, some results on convergence of the same method in Banach spaces are established under the as… ▽ More The motive of this paper is to discuss the local convergence of a two-step Newton type method of convergence rate three for solving nonlinear equations in Banach spaces. It is assumed that the first order derivative of nonlinear operator satisfies the generalized Lipschitz i.e. $L$-average condition. Also, some results on convergence of the same method in Banach spaces are established under the assumption that the derivative of the operators satisfies the radius or center Lipschitz condition with a weak $L$-average particularly it is assumed that $L$ is positive integrable function but not necessarily non-decreasing. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Surface-directed Spinodal Decomposition on Morphologically Patterned Substrates

Authors: Prasenjit Das, Prabhat K. Jaiswal, Sanjay Puri

Abstract: This paper is the second in a two-part exposition on {\it surface-directed spinodal decomposition} (SDSD), i.e., the interplay of kinetics of wetting and phase separation at a surface which is wetted by one of the components of a binary mixture. In our first paper [P. Das, P.K. Jaiswal and S. Puri, Phys. Rev. E {\bf 102}, 012803 (2020)], we studied SDSD on chemically heterogeneous and physically f… ▽ More This paper is the second in a two-part exposition on {\it surface-directed spinodal decomposition} (SDSD), i.e., the interplay of kinetics of wetting and phase separation at a surface which is wetted by one of the components of a binary mixture. In our first paper [P. Das, P.K. Jaiswal and S. Puri, Phys. Rev. E {\bf 102}, 012803 (2020)], we studied SDSD on chemically heterogeneous and physically flat substrates. In this paper, we study SDSD on a chemically homogeneous but morphologically patterned substrate. Such substrates arise in a vast variety of technological applications. Our goal is to provide a theoretical understanding of SDSD in this context. We present detailed numerical results for domain growth both inside and above the grooves in the substrate. The morphological evolution can be understood in terms of the interference of SDSD waves originating from the different surfaces comprising the substrate. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: 17Pages, 9 Figures, Accepted to Physical Review E

Surface-Directed Spinodal Decomposition on Chemically Patterned Substrates

Authors: Prasenjit Das, Prabhat K. Jaiswal, Sanjay Puri

Abstract: {\it Surface-directed spinodal decomposition} (SDSD) is the kinetic interplay of phase separation and wetting at a surface. This process is of great scientific and technological importance. In this paper, we report results from a numerical study of SDSD on a chemically patterned substrate. We consider simple surface patterns for our simulations, but most of the results apply for arbitrary patterns… ▽ More {\it Surface-directed spinodal decomposition} (SDSD) is the kinetic interplay of phase separation and wetting at a surface. This process is of great scientific and technological importance. In this paper, we report results from a numerical study of SDSD on a chemically patterned substrate. We consider simple surface patterns for our simulations, but most of the results apply for arbitrary patterns. In layers near the surface, we observe a dynamical crossover from a {\it surface-registry regime} to a {\it phase-separation regime}. We study this crossover using layer-wise correlation functions and structure factors, and domain length scales. △ Less

Submitted 22 June, 2020; originally announced June 2020.

Comments: 19 Pages, 11 Figs, Accepted to Physical Review E

Journal ref: Physical Review E 102 012803 (2020)

Enhanced attraction between particles in a bidisperse mixture with random pair-wise interactions

Authors: Madhu Priya, Prabhat K. Jaiswal

Abstract: Motivated by growing interests in multicomponent metallic alloys and complex fluids, we study a complex mixture with bidispersity in size and polydispersity in energy. The energy polydispersity in the system is introduced by considering random pair-wise interactions between the particles. Extensive molecular dynamics simulations are performed to compute potential energy and neighborhood identity o… ▽ More Motivated by growing interests in multicomponent metallic alloys and complex fluids, we study a complex mixture with bidispersity in size and polydispersity in energy. The energy polydispersity in the system is introduced by considering random pair-wise interactions between the particles. Extensive molecular dynamics simulations are performed to compute potential energy and neighborhood identity ordering (NIO) parameter as a function of temperature for a wide range of parameters including size-ratio and concentration of the two species by quenching it from a high temperature fluid state to a crystalline state. Our findings demonstrate an enhancement of the neighborhood identity ordering on addition of particles of different sizes. Moreover, a comparatively higher increase in NIO parameter is achieved by tuning the size-ratio of the particles. We also propose NIO parameter to be a good marker to differentiate systems (below the liquid-to-solid transition temperature) having different values of size-ratio and concentrations. Effect of cooling rates on NIO parameter is also discussed. △ Less

Submitted 8 January, 2020; originally announced January 2020.

Comments: 17 pages, 6 figures

Variational Bayesian Methods for Stochastically Constrained System Design Problems

Authors: Prateek Jaiswal, Harsha Honnappa, Vinayak A. Rao

Abstract: We study system design problems stated as parameterized stochastic programs with a chance-constraint set. We adopt a Bayesian approach that requires the computation of a posterior predictive integral which is usually intractable. In addition, for the problem to be a well-defined convex program, we must retain the convexity of the feasible set. Consequently, we propose a variational Bayes-based met… ▽ More We study system design problems stated as parameterized stochastic programs with a chance-constraint set. We adopt a Bayesian approach that requires the computation of a posterior predictive integral which is usually intractable. In addition, for the problem to be a well-defined convex program, we must retain the convexity of the feasible set. Consequently, we propose a variational Bayes-based method to approximately compute the posterior predictive integral that ensures tractability and retains the convexity of the feasible set. Under certain regularity conditions, we also show that the solution set obtained using variational Bayes converges to the true solution set as the number of observations tends to infinity. We also provide bounds on the probability of qualifying a true infeasible point (with respect to the true constraints) as feasible under the VB approximation for a given number of samples. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Journal ref: 2nd Symposium on Advances in Approximate Bayesian Inference, 2019

Asymptotic Consistency of Loss-Calibrated Variational Bayes

Authors: Prateek Jaiswal, Harsha Honnappa, Vinayak A. Rao

Abstract: This paper establishes the asymptotic consistency of the {\it loss-calibrated variational Bayes} (LCVB) method. LCVB was proposed in~\cite{LaSiGh2011} as a method for approximately computing Bayesian posteriors in a `loss aware' manner. This methodology is also highly relevant in general data-driven decision-making contexts. Here, we not only establish the asymptotic consistency of the calibrated… ▽ More This paper establishes the asymptotic consistency of the {\it loss-calibrated variational Bayes} (LCVB) method. LCVB was proposed in~\cite{LaSiGh2011} as a method for approximately computing Bayesian posteriors in a `loss aware' manner. This methodology is also highly relevant in general data-driven decision-making contexts. Here, we not only establish the asymptotic consistency of the calibrated approximate posterior, but also the asymptotic consistency of decision rules. We also establish the asymptotic consistency of decision rules obtained from a `naive' variational Bayesian procedure. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Migration through Machine Learning Lens -- Predicting Sexual and Reproductive Health Vulnerability of Young Migrants

Authors: Amber Nigam, Pragati Jaiswal, Uma Girkar, Teertha Arora, Leo A. Celi

Abstract: In this paper, we have discussed initial findings and results of our experiment to predict sexual and reproductive health vulnerabilities of migrants in a data-constrained environment. Notwithstanding the limited research and data about migrants and migration cities, we propose a solution that simultaneously focuses on data gathering from migrants, augmenting awareness of the migrants to reduce mi… ▽ More In this paper, we have discussed initial findings and results of our experiment to predict sexual and reproductive health vulnerabilities of migrants in a data-constrained environment. Notwithstanding the limited research and data about migrants and migration cities, we propose a solution that simultaneously focuses on data gathering from migrants, augmenting awareness of the migrants to reduce mishaps, and setting up a mechanism to present insights to the key stakeholders in migration to act upon. We have designed a webapp for the stakeholders involved in migration: migrants, who would participate in data gathering process and can also use the app for getting to know safety and awareness tips based on analysis of the data received; public health workers, who would have an access to the database of migrants on the app; policy makers, who would have a greater understanding of the ground reality, and of the patterns of migration through machine-learned analysis. Finally, we have experimented with different machine learning models on an artificially curated dataset. We have shown, through experiments, how machine learning can assist in predicting the migrants at risk and can also help in identifying the critical factors that make migration dangerous for migrants. The results for identifying vulnerable migrants through machine learning algorithms are statistically significant at an alpha of 0.05. △ Less

Submitted 22 November, 2019; v1 submitted 6 October, 2019; originally announced October 2019.

Comments: Accepted for Machine Learning for Health (ML4H) at NeurIPS 2019 - Extended Abstract

On Extending the Applicability of two-Step Secant Method for non-differentiable operators

Authors: Neha Gupta, J. P. Jaiswal

Abstract: The semi-local convergence analysis of a well defined and efficient two-step Secant method in Banach spaces is presented in this study. The recurrence relation technique is used under some weak assumptions. The pertinency of the assumed method is extended for nonlinear non-differentiable operators. The convergence theorem is also established to show the existence and uniqueness of the approximate… ▽ More The semi-local convergence analysis of a well defined and efficient two-step Secant method in Banach spaces is presented in this study. The recurrence relation technique is used under some weak assumptions. The pertinency of the assumed method is extended for nonlinear non-differentiable operators. The convergence theorem is also established to show the existence and uniqueness of the approximate solution. A numerical illustration is quoted to certify the theoretical part which shows that the earlier study will fail if the function is non-differentiable. △ Less

Submitted 6 May, 2019; originally announced May 2019.

A weight-adjusted discontinuous Galerkin method for the poroelastic wave equation: penalty fluxes and micro-heterogeneities

Authors: Khemraj Shukla, Jesse Chan, Maarten V. de Hoop, Priyank Jaiswal

Abstract: We introduce a high-order weight-adjusted discontinuous Galerkin (WADG) scheme for the numerical solution of three-dimensional (3D) wave propagation problems in anisotropic porous media. We use a coupled first-order symmetric stress-velocity formulation. Careful attention is directed at (a) the derivation of an energy-stable penalty-based numerical flux, which offers high-order accuracy in presenc… ▽ More We introduce a high-order weight-adjusted discontinuous Galerkin (WADG) scheme for the numerical solution of three-dimensional (3D) wave propagation problems in anisotropic porous media. We use a coupled first-order symmetric stress-velocity formulation. Careful attention is directed at (a) the derivation of an energy-stable penalty-based numerical flux, which offers high-order accuracy in presence of material discontinuities, and (b) proper treatment of micro-heterogeneities (sub-element variations) in the numerical scheme. The use of a penalty-based numerical flux avoids the diagonalization of Jacobian matrices into polarized wave constituents necessary when solving element-wise Riemann problems. Micro-heterogeneities are accurately and stably incorporated in the numerical scheme using easily-invertible weight-adjusted mass matrices. The convergence of the proposed numerical scheme is proven and verified by using convergence studies against analytical plane wave solutions. The proposed method is also compared against an existing implementation using the spectral element method to solve the poroelastic wave equation. △ Less

Submitted 23 May, 2019; v1 submitted 4 April, 2019; originally announced April 2019.

On the Statistical Consistency of Risk-Sensitive Bayesian Decision-Making

Authors: Prateek Jaiswal, Harsha Honnappa, Vinayak A. Rao

Abstract: We study data-driven decision-making problems in the Bayesian framework, where the expectation in the Bayes risk is replaced by a risk-sensitive entropic risk measure. We focus on problems where calculating the posterior distribution is intractable, a typical situation in modern applications with large datasets and complex data generating models. We leverage a dual representation of the entropic r… ▽ More We study data-driven decision-making problems in the Bayesian framework, where the expectation in the Bayes risk is replaced by a risk-sensitive entropic risk measure. We focus on problems where calculating the posterior distribution is intractable, a typical situation in modern applications with large datasets and complex data generating models. We leverage a dual representation of the entropic risk measure to introduce a novel risk-sensitive variational Bayesian (RSVB) framework for jointly computing a risk-sensitive posterior approximation and the corresponding decision rule. The proposed RSVB framework can be used to extract computational methods for doing risk-sensitive approximate Bayesian inference. We show that our general framework includes two well-known computational methods for doing approximate Bayesian inference viz. naive VB and loss-calibrated VB. We also study the impact of these computational approximations on the predictive performance of the inferred decision rules and values. We compute the convergence rates of the RSVB approximate posterior and also of the corresponding optimal value and decision rules. We illustrate our theoretical findings in both parametric and nonparametric settings with the help of three examples: the single and multi-product newsvendor model and Gaussian process classification. △ Less

Submitted 9 September, 2021; v1 submitted 12 March, 2019; originally announced March 2019.

Asymptotic Consistency of $α-$Rényi-Approximate Posteriors

Authors: Prateek Jaiswal, Vinayak A. Rao, Harsha Honnappa

Abstract: We study the asymptotic consistency properties of $α$-Rényi approximate posteriors, a class of variational Bayesian methods that approximate an intractable Bayesian posterior with a member of a tractable family of distributions, the member chosen to minimize the $α$-Rényi divergence from the true posterior. Unique to our work is that we consider settings with $α> 1$, resulting in approximations th… ▽ More We study the asymptotic consistency properties of $α$-Rényi approximate posteriors, a class of variational Bayesian methods that approximate an intractable Bayesian posterior with a member of a tractable family of distributions, the member chosen to minimize the $α$-Rényi divergence from the true posterior. Unique to our work is that we consider settings with $α> 1$, resulting in approximations that upperbound the log-likelihood, and consequently have wider spread than traditional variational approaches that minimize the Kullback-Liebler (KL) divergence from the posterior. Our primary result identifies sufficient conditions under which consistency holds, centering around the existence of a 'good' sequence of distributions in the approximating family that possesses, among other properties, the right rate of convergence to a limit distribution. We further characterize the good sequence by demonstrating that a sequence of distributions that converges too quickly cannot be a good sequence. We also extend our analysis to the setting where $α$ equals one, corresponding to the minimizer of the reverse KL divergence, and to models with local latent variables. We also illustrate the existence of good sequence with a number of examples. Our results complement a growing body of work focused on the frequentist properties of variational Bayesian methods. △ Less

Submitted 14 August, 2020; v1 submitted 5 February, 2019; originally announced February 2019.

Optimal Allocations for Sample Average Approximation

Authors: Prateek Jaiswal, Harsha Honnappa, Raghu Pasupathy

Abstract: We consider a single stage stochastic program without recourse with a strictly convex loss function. We assume a compact decision space and grid it with a finite set of points. In addition, we assume that the decision maker can generate samples of the stochastic variable independently at each grid point and form a sample average approximation (SAA) of the stochastic program. Our objective in this… ▽ More We consider a single stage stochastic program without recourse with a strictly convex loss function. We assume a compact decision space and grid it with a finite set of points. In addition, we assume that the decision maker can generate samples of the stochastic variable independently at each grid point and form a sample average approximation (SAA) of the stochastic program. Our objective in this paper is to characterize an asymptotically optimal linear sample allocation rule, given a fixed sampling budget, which maximizes the decay rate of probability of making false decision. △ Less

Submitted 17 November, 2018; originally announced November 2018.

Dominating Points of Gaussian Extremes

Authors: Harsha Honnappa, Raghu Pasupathy, Prateek Jaiswal

Abstract: We quantify the large deviations of Gaussian extreme value statistics on closed convex sets in d-dimensional Euclidean space. The asymptotics imply that the extreme value distribution exhibits a rate function that is a simple quadratic function of a unique "dominating point" located on the boundary of the convex set. Furthermore, the dominating point is identified as the optimizer of a certain con… ▽ More We quantify the large deviations of Gaussian extreme value statistics on closed convex sets in d-dimensional Euclidean space. The asymptotics imply that the extreme value distribution exhibits a rate function that is a simple quadratic function of a unique "dominating point" located on the boundary of the convex set. Furthermore, the dominating point is identified as the optimizer of a certain convex quadratic programming problem, indicating a "collusion" between the dependence structure of the Gaussian random vectors and the geometry of the convex set in determining the asymptotics. We specialize our main result to polyhedral sets which appear frequently in other contexts involving logarithmic asymptotics. We also extend the main result to characterize the large deviations of Gaussian-mixture extreme value statistics on general convex sets. Our results have implications to contexts arising in rare-event probability estimation and stochastic optimization, since the nature of the dominating point and the rate function suggest importance sampling measures. △ Less

Submitted 29 October, 2018; originally announced October 2018.

MSC Class: 60F10; 60G70

Microwave Irradiation Assisted Deposition of Ga2O3 on III-nitrides for deep-UV opto-electronics

Authors: Piyush Jaiswal, Usman Ul Muazzam, Anamika Singh Pratiyush, Nagaboopathy Mohan, Srinivasan Raghavan, R. Muralidharan, S. A. Shivashankar, Digbijoy N. Nath

Abstract: We report on the deposition of gallium oxide using microwave irradiation technique on III nitride epi layers. We also report on the first demonstration of a gallium oxide device, a visible blind deep UV detector, with GaN based heterostructure as the substrate. The film deposited in the solution medium, at less than 200 C, using a metalorganic precursor, was nanocrystalline. XRD confirms that as d… ▽ More We report on the deposition of gallium oxide using microwave irradiation technique on III nitride epi layers. We also report on the first demonstration of a gallium oxide device, a visible blind deep UV detector, with GaN based heterostructure as the substrate. The film deposited in the solution medium, at less than 200 C, using a metalorganic precursor, was nanocrystalline. XRD confirms that as deposited film when annealed at high temperature turns polycrystalline beta gallium oxide. SEM shows the as deposited film to be uniform, with a surface roughness of 4 to 5 nm, as revealed by AFM. Interdigitated metal semiconductor metal MSM devices with Ni,Au contact exhibited peak spectral response at 230 nm and a good visible rejection ratio. This first demonstration of a deep-UV detector on beta-gallium oxide on III nitride stack is expected to open up new possibilities of functional and physical integration of beta gallium oxide and GaN material families towards enabling next generation high performance devices by exciting band and heterostructure engineering. △ Less

Submitted 15 November, 2017; v1 submitted 26 October, 2017; originally announced October 2017.

Comments: Main manuscript 5 pages, 4 figures Supplementary information 2 pages, 2 figures

Jet observables and stops at 100 TeV collider

Authors: JiJi Fan, Prerit Jaiswal, John Shing Chau Leung

Abstract: A future proton-proton collider with center of mass energy around 100 TeV will have a remarkable capacity to discover massive new particles and continue exploring weak scale naturalness. In this work we will study its sensitivity to two stop simplified models as further examples of its potential power: pair production of stops that decay to tops or bottoms and higgsinos; and stops that are either… ▽ More A future proton-proton collider with center of mass energy around 100 TeV will have a remarkable capacity to discover massive new particles and continue exploring weak scale naturalness. In this work we will study its sensitivity to two stop simplified models as further examples of its potential power: pair production of stops that decay to tops or bottoms and higgsinos; and stops that are either pair produced or produced together with a gluino and then cascade down through gluinos to the lightest superpartner (LSP). In both simplified models, super-boosted tops or bottoms with transverse momentum of order TeV will be produced abundantly and call for new strategies to identify them. We will apply a set of simple jet observables, including track-based jet mass, N-subjettiness and mass drop, to tag the boosted hadronic or leptonic decaying objects and suppress the Standard Model as well as possible SUSY backgrounds. Assuming 10% systematic uncertainties, the future 100 TeV collider can discover (exclude) stops with masses up to 6 (7) TeV with 3 inverse attobarns of integrated luminosity if the stops decay to higgsinos. If the stops decay through gluinos to LSPs, due to additional SUSY backgrounds from gluino pair production, a higher luminosity of about 30 inverse attobarns is needed to discover stops up to 6 TeV. We will also discuss how to use jet observables to distinguish simplified models with different types of LSPs. The boosted top or bottom tagging strategies developed in this paper could also be used in other searches at a 100 TeV collider. For example, the strategy could help discover gluino pair production with gluino mass close to 11 TeV with 3 inverse attobarns of integrated luminosity. △ Less

Submitted 10 September, 2017; v1 submitted 10 April, 2017; originally announced April 2017.

Comments: 20 pages, 14 figures

Journal ref: Phys. Rev. D 96, 036017 (2017)

The sandpile revisited: Computer assisted determination of constitutive relations and the breaking of scaling

Authors: H. George E. Hentschel, Prabhat K. Jaiswal, Chandana Mondal, Itamar Procaccia, Jacques Zylberg

Abstract: We revisit the problem of the stress distribution in a frictional sandpile under gravity, equipped with a new numerical model of granular assemblies with both normal and tangential (frictional) inter-granular forces. Numerical simulations allow a determination of the spatial dependence of all the components of the stress field as a function of systems size, the coefficient of static friction and t… ▽ More We revisit the problem of the stress distribution in a frictional sandpile under gravity, equipped with a new numerical model of granular assemblies with both normal and tangential (frictional) inter-granular forces. Numerical simulations allow a determination of the spatial dependence of all the components of the stress field as a function of systems size, the coefficient of static friction and the frictional interaction with the bottom surface. Our study clearly demonstrates that interaction with the bottom surface plays a crucial role in the formation of a pressure dip under the apex of a granular pile. Basic to the theory of sandpiles are assumptions about the form of scaling solutions and constitutive relations for cohesive-less hard grains for which no typical scale is available. We find that these constitutive relations must be modified; moreover for smaller friction coefficients and smaller piles these scaling assumptions break down in the bulk of the sandpile due to the presence of length scales that must be carefully identified. After identifying the crucial scale we provide a predictive theory to when scaling solutions are expected to break down. At the bottom of the pile the scaling assumption always breaks, due to the different interactions with the bottom surface. The consequences for measurable quantities like the pressure distribution and shear stress at the bottom of the pile are discussed. For example one can have a transition from no dip in the base-pressure to a dip at the center of the pile as a function of the system size. △ Less

Submitted 29 November, 2016; originally announced November 2016.

Comments: 14 pages, 17 figures, Submitted in Phys. Rev. E

Resummation of Jet Veto Logarithms at partial N$^3$LL + NNLO for $W^+W^-$ Production at the LHC

Authors: S. Dawson, P. Jaiswal, Ye Li, H. Ramani, Mao Zeng

Abstract: We compute the resummed on-shell $W^+ W^-$ production cross section under a jet-veto at the LHC to partial N$^3$LL order matched to the fixed order NNLO result. Differential NNLO cross sections are obtained from an implementation of $q_T$ subtraction in Sherpa. The two-loop virtual corrections to the $q \bar q \rightarrow W^+ W^-$ amplitude, used in both fixed order and resummation predictions, ar… ▽ More We compute the resummed on-shell $W^+ W^-$ production cross section under a jet-veto at the LHC to partial N$^3$LL order matched to the fixed order NNLO result. Differential NNLO cross sections are obtained from an implementation of $q_T$ subtraction in Sherpa. The two-loop virtual corrections to the $q \bar q \rightarrow W^+ W^-$ amplitude, used in both fixed order and resummation predictions, are extracted from the public code {\tt qqvvamp}. We perform resummation using soft collinear effective theory (SCET), with approximate beam functions where only the logarithmic terms are included at two-loop. In addition to scale uncertainties from the hard matching scale and the factorization scale, rapidity scale variations are obtained within the analytic regulator approach. Our resummation results show a decrease in the jet-veto cross-section compared to NNLO fixed order predictions, with reduced scale uncertainties compared to NNLL+NLO resummed predictions. We include the loop-induced $gg$ contribution with jet veto resummation to NLL+LO. The prediction shows good agreement with recent LHC measurements. △ Less

Submitted 26 October, 2016; v1 submitted 3 June, 2016; originally announced June 2016.

Comments: 19 pages, 1 figure

Report number: YITP-SB-16-24, FERMILAB-PUB-16-210-PPD-T

Journal ref: Phys. Rev. D 94, 114014 (2016)

Scaling Theory of the Mechanical Properties of Amorphous Nano-Films

Authors: Awadhesh K. Dubey, H. George E. Hentschel, Prabhat K. Jaiswal, Chandana Mondal, Yoav G. Pollack, Itamar Procaccia

Abstract: Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create very stable glassy films. Using the exact relations between the Hessian matrix and the shear and bulk moduli we explore the mechanical properties of the nano-fi… ▽ More Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create very stable glassy films. Using the exact relations between the Hessian matrix and the shear and bulk moduli we explore the mechanical properties of the nano-films as a function of the density of the substrate and the film thickness. The existence of the substrate dominates the mechanical properties of the combined substrate-film system. Scaling concepts are then employed to achieve data collapse in a wide range of densities and film thicknesses. △ Less

Submitted 14 April, 2016; originally announced April 2016.

Comments: 5 pages, 6 figures, Submitted to Phys. Rev. Lett

Mechanical Yield in Amorphous Solids: a First-Order Phase Transition

Authors: Prabhat Jaiswal, Itamar Procaccia, Corrado Rainone, Murari Singh

Abstract: Amorphous solids yield at a critical value of the strain (in strain controlled experiments); for larger strains the average stress can no longer increase - the system displays an elasto-plastic steady state. A long standing riddle in the materials community is what is the difference between the microscopic states of the material before and after yield. Explanations in the literature are material s… ▽ More Amorphous solids yield at a critical value of the strain (in strain controlled experiments); for larger strains the average stress can no longer increase - the system displays an elasto-plastic steady state. A long standing riddle in the materials community is what is the difference between the microscopic states of the material before and after yield. Explanations in the literature are material specific, but the universality of the phenomenon begs a universal answer. We argue here that there is no fundamental difference in the states of matter before and after yield, but the yield is a bona-fide first order phase transition between a highly restricted set of possible configurations residing in a small region of phase space to a vastly rich set of configurations which include many marginally stable ones. To show this we employ an order parameter of universal applicability, independent of the microscopic interactions, that is successful in quantifying the transition in an unambiguous manner. △ Less

Submitted 10 January, 2016; originally announced January 2016.

Comments: 5 pages, 8 figures

Journal ref: Phys. Rev. Lett. 116, 085501 (2016)

Precision diboson measurements and the interplay of pT and jet-veto resummations

Authors: Prerit Jaiswal, Patrick Meade, Harikrishnan Ramani

Abstract: In this paper we demonstrate the agreement of jet-veto resummation and pT resummation for explaining the WW cross sections at Run 1 of the LHC, and in the future. These two resummation techniques resum different logarithms, however via reweighting methods they can be compared for various differential or exclusive cross sections. We find excellent agreement between the two resummation methods for p… ▽ More In this paper we demonstrate the agreement of jet-veto resummation and pT resummation for explaining the WW cross sections at Run 1 of the LHC, and in the future. These two resummation techniques resum different logarithms, however via reweighting methods they can be compared for various differential or exclusive cross sections. We find excellent agreement between the two resummation methods for predicting the zero-jet cross section, and propose a new reweighting method for jet-veto resummation that can be used to compare other differential distributions. We advocate a cross-channel comparison for the high-luminosity run of the LHC as both a test of QCD and new physics. △ Less

Submitted 2 June, 2016; v1 submitted 23 September, 2015; originally announced September 2015.

Comments: 14 TeV analysis replaced with 13 TeV, minor changes in text. Version published in PRD

Journal ref: Phys. Rev. D 93, 093007 (2016)

Stochastic Approach to Plasticity and Yield in Amorphous Solids

Authors: H. G. E. Hentschel, Prabhat K. Jaiswal, Itamar Procaccia, Srikanth Sastry

Abstract: We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eige… ▽ More We focus on the probability distribution function (pdf) $P(Δγ; γ)$ where $Δγ$ are the {\em measured} strain intervals between plastic events in an athermal strained amorphous solids, and $γ$ measures the accumulated strain. The tail of this distribution as $Δγ\to 0$ (in the thermodynamic limit) scales like $Δγ^η$. The exponent $η$ is related via scaling relations to the tail of the pdf of the eigenvalues of the {\em plastic modes} of the Hessian matrix $P(λ)$ which scales like $λ^θ$, $η=(θ-1)/2$. The numerical values of $η$ or $θ$ can be determined easily in the unstrained material and in the yielded state of plastic flow. Special care is called for in the determination of these exponents between these states as $γ$ increases. Determining the $γ$ dependence of the pdf $P(Δγ; γ)$ can shed important light on plasticity and yield. We conclude that the pdf's of both $Δγ$ and $λ$ are not continuous functions of $γ$. In slowly quenched amorphous solids they undergo two discontinuous transitions, first at $γ=0^+$ and then at the yield point $γ=γ_{_{\rm Y}}$ to plastic flow. In quickly quenched amorphous solids the second transition is smeared out due to the non existing stress peak before yield. The nature of these transitions and scaling relations with the system size dependence of $\langle Δγ\rangle$ are discussed. △ Less

Submitted 16 September, 2015; originally announced September 2015.

Comments: 8 pages, 6 figures; Submitted to Physical Review B

Re-emergence of rapidity scale uncertainty in SCET

Authors: Prerit Jaiswal, Takemichi Okui

Abstract: The artificial separation of a full-theory mode into distinct collinear and soft modes in SCET leads to divergent integrals over rapidity, which are not present in the full theory. Rapidity divergence introduces an additional scale into the problem, giving rise to its own renormalization group with respect to this new scale. Two contradicting claims exist in the literature concerning rapidity scal… ▽ More The artificial separation of a full-theory mode into distinct collinear and soft modes in SCET leads to divergent integrals over rapidity, which are not present in the full theory. Rapidity divergence introduces an additional scale into the problem, giving rise to its own renormalization group with respect to this new scale. Two contradicting claims exist in the literature concerning rapidity scale uncertainty. One camp has shown that the results of perturbative calculations depend on the precise choice of rapidity scale. The other has derived an all-order factorization formula with no dependence on rapidity scale, by using a form of analytic regulator to regulate rapidity divergences. We deliver a simple resolution to this controversy by deriving an alternative form of the all-order factorization formula with an analytic regulator that, despite being formally rapidity scale independent, reveals how rapidity scale dependence arises when it is truncated at a finite order in perturbation theory. With our results, one can continue to take advantage of the technical ease and simplicity of the analytic regulator approach while correctly taking into account rapidity scale dependence. As an application, we update our earlier study of WW production with jet-veto by including rapidity scale uncertainty. While the central values of the predictions are unchanged, the scale uncertainties are increased and consistency between the NLL and NNLL calculations are improved. △ Less

Submitted 2 October, 2015; v1 submitted 24 June, 2015; originally announced June 2015.

Comments: References added. Improved to a theoretically more robust method. Numerical results unchanged. Version accepted by PRD

Modeling Barkhausen Noise in Magnetic Glasses with Dipole-Dipole Interactions

Authors: Awadhesh K. Dubey, H. George E. Hentschel, Prabhat K. Jaiswal, Chandana Mondal, Itamar Procaccia, Bhaskar Sen Gupta

Abstract: Long-ranged dipole-dipole interactions in magnetic glasses give rise to magnetic domains having labyrinthine patterns. Barkhausen Noise is then expected to result from the movement of domain boundaries which is supposed to be modeled by the motion of elastic membranes with random pinning. We propose an atomistic model of such magnetic glasses in which we measure the Barkhausen Noise which indeed r… ▽ More Long-ranged dipole-dipole interactions in magnetic glasses give rise to magnetic domains having labyrinthine patterns. Barkhausen Noise is then expected to result from the movement of domain boundaries which is supposed to be modeled by the motion of elastic membranes with random pinning. We propose an atomistic model of such magnetic glasses in which we measure the Barkhausen Noise which indeed results from the movement of domain boundaries. Nevertheless the statistics of the Barkhausen Noise is found in striking disagreement with the expectations in the literature. In fact we find exponential statistics without any power law, stressing the fact that Barkhausen Noise can belong to very different universality classes. In this glassy system the essence of the phenomenon is the ability of spin-carrying particles to move and minimize the energy without any spin flip. A theory is offered in excellent agreement with the measured data without any free parameter. △ Less

Submitted 7 June, 2015; originally announced June 2015.

Comments: 5 Pages, 5 Figures, Submitted to EPL

Prospect for measuring the CP phase in the $hττ$ coupling at the LHC

Authors: Andrew Askew, Prerit Jaiswal, Takemichi Okui, Harrison B. Prosper, Nobuo Sato

Abstract: The search for a new source of CP violation is one of the most important endeavors in particle physics. A particularly interesting way to perform this search is to probe the CP phase in the $hττ$ coupling, as the phase is currently completely unconstrained by all existing data. Recently, a novel variable $Θ$ was proposed for measuring the CP phase in the $hττ$ coupling through the… ▽ More The search for a new source of CP violation is one of the most important endeavors in particle physics. A particularly interesting way to perform this search is to probe the CP phase in the $hττ$ coupling, as the phase is currently completely unconstrained by all existing data. Recently, a novel variable $Θ$ was proposed for measuring the CP phase in the $hττ$ coupling through the $τ^\pm \to π^\pm π^0 ν$ decay mode. We examine two crucial questions that the real LHC detectors must face, namely, the issue of neutrino reconstruction and the effects of finite detector resolution. For the former, we find strong evidence that the collinear approximation is the best for the $Θ$ variable. For the latter, we find that the angular resolution is actually not an issue even though the reconstruction of $Θ$ requires resolving the highly collimated $π^\pm$'s and $π^0$'s from the $τ$ decays. Instead, we find that it is the missing transverse energy resolution that significantly limits the LHC reach for measuring the CP phase via $Θ$. With the current missing energy resolution, we find that with $\sim 1000\,\textrm{fb}^{-1}$ the CP phase hypotheses $Δ= 0^\circ$ (the standard model value) and $Δ= 90^\circ$ can be distinguished, at most, at the 95\% confidence level. △ Less

Submitted 4 May, 2015; v1 submitted 13 January, 2015; originally announced January 2015.

Comments: Minor wording changes. The version published in PRD

Report number: JLAB-THY-15-2000

Journal ref: Phys. Rev. D 91, 075014 (2015)

A New Perspective on Scale Uncertainties for Diboson Processes

Authors: Prerit Jaiswal

Abstract: The electroweak diboson production cross-sections are known to receive large radiative corrections beyond leading-order (LO), approaching up to 60% at next-to-leading order (NLO), compared to the scale uncertainties which are in the range 1-5% at LO. If the scale uncertainties are to be taken seriously, the NLO predictions are as much as 30 sigma away from their LO counterpart suggesting a very po… ▽ More The electroweak diboson production cross-sections are known to receive large radiative corrections beyond leading-order (LO), approaching up to 60% at next-to-leading order (NLO), compared to the scale uncertainties which are in the range 1-5% at LO. If the scale uncertainties are to be taken seriously, the NLO predictions are as much as 30 sigma away from their LO counterpart suggesting a very poor convergence of the perturbation theory. In this paper, we show that there is a second source of scale uncertainty which has not been considered in the literature, namely the complex phase of the scales, which can lead to large perturbative corrections. Using the formalism of soft-collinear effective theory, we resum these large contributions from the complex phase, finding that the scale uncertainties in fixed-order calculations can be grossly underestimated compared to the resummed predictions, which have uncertainties as large as 13-16% at LO. Even at NLO, we find that the scale uncertainties are marginally higher than previously estimated, depending on the choice of scale. Using our method of scale variation, the compatibility of LO and NLO results within the scale uncertainties is vastly improved so that the perturbation theory can be relied upon. This method of scale variation can be easily extended to beyond NLO calculations as well as other LHC processes. △ Less

Submitted 3 November, 2014; originally announced November 2014.

Shear Transformation Zones: State Determined or Protocol Dependent?

Authors: Oleg Gendelman, Prabhat K. Jaiswal, Itamar Procaccia, Bhaskar Sen Gupta, Jacques Zylberg

Abstract: The concept of a Shear Transformation Zone (STZ) refers to a region in an amorphous solid that undergoes a plastic event when the material is put under an external mechanical load. An important question that had accompanied the development of the theory of plasticity in amorphous solids for many years now is whether an STZ is a {\em region} existing in the material (which can be predicted by analy… ▽ More The concept of a Shear Transformation Zone (STZ) refers to a region in an amorphous solid that undergoes a plastic event when the material is put under an external mechanical load. An important question that had accompanied the development of the theory of plasticity in amorphous solids for many years now is whether an STZ is a {\em region} existing in the material (which can be predicted by analyzing the unloaded material), or is it an {\em event} that depends on the loading protocol (i.e., the event cannot be predicted without following the protocol itself). In this Letter we present strong evidence that the latter is the case. Infinitesimal changes of protocol result in macroscopically big jumps in the positions of plastic events, meaning that these can never be predicted from considering the unloaded material. △ Less

Submitted 18 August, 2014; originally announced August 2014.

Comments: 4 pages, 5 figures

Journal ref: Europhys. Lett. 109, 16002 (2015)

An Explanation of the WW Excess at the LHC by Jet-Veto Resummation

Authors: Prerit Jaiswal, Takemichi Okui

Abstract: The WW production cross section measured at the LHC has been consistently exhibiting a mild excess beyond the SM prediction, in both ATLAS and CMS at both 7-TeV and 8-TeV runs. We provide an explanation of the excess in terms of resummation of large logarithms that arise from a jet-veto condition, i.e., the rejection of high-pT jets with pT > pT(veto) that is imposed in the experimental analyses t… ▽ More The WW production cross section measured at the LHC has been consistently exhibiting a mild excess beyond the SM prediction, in both ATLAS and CMS at both 7-TeV and 8-TeV runs. We provide an explanation of the excess in terms of resummation of large logarithms that arise from a jet-veto condition, i.e., the rejection of high-pT jets with pT > pT(veto) that is imposed in the experimental analyses to reduce backgrounds. Jet veto introduces a second mass scale pT(veto) to the problem in addition to the invariant mass of the WW pair. This gives rise to large logarithms of the ratio of the two scales that need to be resummed. Such resummation may not be properly accounted for by the Monte Carlo simulations used in the ATLAS and CMS studies. Those logarithms are also accompanied by large pi^2 terms when the standard, positive sign is chosen for the squared renormalization scale. We analytically resum the large logarithms including the pi^2 terms in the framework of soft collinear effective theory (SCET), and demonstrate that the SCET calculation not only reduces the scale uncertainties of the SM prediction significantly but also renders the theory prediction well compatible with the experiment. We find that resummation of the large logarithms and that of the pi^2 terms are both comparably important. △ Less

Submitted 6 January, 2015; v1 submitted 16 July, 2014; originally announced July 2014.

Comments: A minor bug in the beam functions corrected. The final results are virtually unchanged from those in the published version

Journal ref: Phys. Rev. D 90, 073009 (2014)

A class of optimal eighth-order Steffensen-type iterative methods for solving nonlinear equations and their basins of attraction

Authors: Anuradha Singh, J. P. Jaiswal

Abstract: This article concerned with the issue of solving a nonlinear equation with the help of iterative method where no any derivative evaluation is required per iteration. Therefore, this work contributes to a new class of optimal eighth-order Steffensen-type methods. Theoretical proof has been given to reveal the eighth-order convergence. Numerical comparisons have been carried out to show the effectiv… ▽ More This article concerned with the issue of solving a nonlinear equation with the help of iterative method where no any derivative evaluation is required per iteration. Therefore, this work contributes to a new class of optimal eighth-order Steffensen-type methods. Theoretical proof has been given to reveal the eighth-order convergence. Numerical comparisons have been carried out to show the effectiveness of contributed scheme. △ Less

Submitted 11 April, 2014; originally announced April 2014.

An efficient family of optimal eight-order iterative methods for solving nonlinear equations

Authors: Anuradha Singh, J. P. Jaiswal

Abstract: The prime objective of this paper is to design a new family of eighth-order iterative methods by accelerating the order of convergence and efficiency index of well existing seventh-order iterative method of \cite{Soleymani1} without using more function evaluations for finding simple roots of nonlinear equations. The presented iterative family requires three function and one derivative evaluations… ▽ More The prime objective of this paper is to design a new family of eighth-order iterative methods by accelerating the order of convergence and efficiency index of well existing seventh-order iterative method of \cite{Soleymani1} without using more function evaluations for finding simple roots of nonlinear equations. The presented iterative family requires three function and one derivative evaluations and thus agrees with the conjecture of Kung-Traub for the case $n = 4$ (i.e. optimal). We have also discussed the derivative free version of the proposed scheme. Numerical comparisons have been carried out to demonstrate the efficiency and the performances of proposed method. △ Less

Submitted 27 March, 2014; originally announced March 2014.

Exotic Decays of the 125 GeV Higgs Boson

Authors: David Curtin, Rouven Essig, Stefania Gori, Prerit Jaiswal, Andrey Katz, Tao Liu, Zhen Liu, David McKeen, Jessie Shelton, Matthew Strassler, Ze'ev Surujon, Brock Tweedie, Yi-Ming Zhong

Abstract: We perform an extensive survey of non-standard Higgs decays that are consistent with the 125 GeV Higgs-like resonance. Our aim is to motivate a large set of new experimental analyses on the existing and forthcoming data from the Large Hadron Collider (LHC). The explicit search for exotic Higgs decays presents a largely untapped discovery opportunity for the LHC collaborations, as such decays may b… ▽ More We perform an extensive survey of non-standard Higgs decays that are consistent with the 125 GeV Higgs-like resonance. Our aim is to motivate a large set of new experimental analyses on the existing and forthcoming data from the Large Hadron Collider (LHC). The explicit search for exotic Higgs decays presents a largely untapped discovery opportunity for the LHC collaborations, as such decays may be easily missed by other searches. We emphasize that the Higgs is uniquely sensitive to the potential existence of new weakly coupled particles and provide a unified discussion of a large class of both simplified and complete models that give rise to characteristic patterns of exotic Higgs decays. We assess the status of exotic Higgs decays after LHC Run 1. In many cases we are able to set new nontrivial constraints by reinterpreting existing experimental analyses. We point out that improvements are possible with dedicated analyses and perform some preliminary collider studies. We prioritize the analyses according to their theoretical motivation and their experimental feasibility. This document is accompanied by a website that will be continuously updated with further information: http://exotichiggs.physics.sunysb.edu. △ Less

Submitted 9 October, 2017; v1 submitted 17 December, 2013; originally announced December 2013.

Comments: 179 pages + references and appendices, 36 figures, 21 tables. Slight updates to SM+S and 2HDM+S calculations and plots

Report number: YITP-13-47, PITT-PACC 1314

Journal ref: Phys. Rev. D 90, 075004 (2014)

Some Classes of third and Fourth-order iterative methods for solving nonlinear equations

Authors: J. P. Jaiswal

Abstract: The object of the present work is to present the new classes of third-order and fourth-order iterative methods for solving nonlinear equations. Our third-order method includes methods of Weerakoon \cite{Weerakoon}, Homeier \cite{Homeier2}, Chun \cite{Chun} e.t.c. as particular cases. After that we make this third-order method to fourth-order (optimal) by using a single weight function rather than… ▽ More The object of the present work is to present the new classes of third-order and fourth-order iterative methods for solving nonlinear equations. Our third-order method includes methods of Weerakoon \cite{Weerakoon}, Homeier \cite{Homeier2}, Chun \cite{Chun} e.t.c. as particular cases. After that we make this third-order method to fourth-order (optimal) by using a single weight function rather than using two different weight functions in \cite{Soleymani}. Finally some examples are given to illustrate the performance of the our method by comparing with new existing third and fourth-order methods. △ Less

Submitted 30 July, 2013; originally announced July 2013.

Comments: arXiv admin note: substantial text overlap with arXiv:1307.7334

A class of iterative methods for solving nonlinear equation with fourth-order convergence

Authors: J. P. Jaiswal

Abstract: In this paper we established a class of optimal fourth-order methods which is obtained by existing third-order method for solving nonlinear equations for simple roots by using weight functions. Some physical examples are given to illustrate the efficiency and performance of our method. In this paper we established a class of optimal fourth-order methods which is obtained by existing third-order method for solving nonlinear equations for simple roots by using weight functions. Some physical examples are given to illustrate the efficiency and performance of our method. △ Less

Submitted 28 July, 2013; originally announced July 2013.

Texture of ZnO thin films deposited through microwave irradiation

Authors: Piyush Jaiswal, Sanjaya Brahma, K. S. Suresh, S. A. Shivashankar, Satyam Suwas

Abstract: We report the crystallographic texture of ZnO thin films comprising nanorods grown by a microwave irradiation assisted method. Different substrates were used, namely Si, Ge, metal coated Si, PMMA coated Si and ITO coated glass, to examine the respective development of crystallographic texture. The films were characterized by Xray diffraction and scanning electron microscopy, while the texture anal… ▽ More We report the crystallographic texture of ZnO thin films comprising nanorods grown by a microwave irradiation assisted method. Different substrates were used, namely Si, Ge, metal coated Si, PMMA coated Si and ITO coated glass, to examine the respective development of crystallographic texture. The films were characterized by Xray diffraction and scanning electron microscopy, while the texture analysis was done by Xray pole figure analysis using the Schultz reflection method. The ZnO film deposited on Si and Ge showed a mixed texture. On all the other substrates, c axis oriented ZnO films were obtained. △ Less

Submitted 25 July, 2013; originally announced July 2013.

Journal ref: Thin Solid Films Volume 593, 30 October 2015, Pages 81-90