-
A map of single-phase high-entropy alloys
Authors:
Wei Chen,
Antoine Hilhorst,
Georges Bokas,
Stéphane Gorsse,
Pascal J. Jacques,
Geoffroy Hautier
Abstract:
High-entropy alloys have shown much interest and unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is likely to be rare and identifying the existence of such alloys has been very challenging because of the very large space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a che…
▽ More
High-entropy alloys have shown much interest and unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is likely to be rare and identifying the existence of such alloys has been very challenging because of the very large space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a chemical map of single-phase equimolar high entropy alloys by investigating over 650000 equimolar quinary alloys through a binary regular solid-solution model. We identify more than 30000 potential single-phase equimolar alloys (5% of the possible combinations) forming mainly in body-centered cubic structures. We unveil the chemistries that are likely to form high-entropy alloys, and identify the complex interplay among mixing enthalpy, intermetallics formation, and melting point that drives the formation of these solid solutions. We demonstrate the power of our method by predicting the existence of two new high entropy alloys, i.e. the body-centered cubic AlCoMnNiV and the face-centered cubic CoFeMnNiZn, which are successfully synthesized.
△ Less
Submitted 20 April, 2023; v1 submitted 11 September, 2022;
originally announced September 2022.
-
The energy return on investment of whole energy systems: application to Belgium
Authors:
Jonathan Dumas,
Antoine Dubois,
Paolo Thiran,
Pierre Jacques,
Francesco Contino,
Bertrand Cornélusse,
Gauthier Limpens
Abstract:
Planning the defossilization of energy systems by facilitating high penetration of renewables and maintaining access to abundant and affordable primary energy resources is a nontrivial multi-objective problem. However, so far, most long-term policies to decrease the carbon footprint of our societies consider the cost of the system as the leading indicator in the energy system models. This paper is…
▽ More
Planning the defossilization of energy systems by facilitating high penetration of renewables and maintaining access to abundant and affordable primary energy resources is a nontrivial multi-objective problem. However, so far, most long-term policies to decrease the carbon footprint of our societies consider the cost of the system as the leading indicator in the energy system models. This paper is the first to develop a novel approach by adding the energy return on investment (EROI) to a whole energy system optimization model. We built the database with all EROI technologies and resources considered. In addition, moving away from fossil-based to carbon-neutral energy systems raises the issue of the uncertainty of low-carbon technologies and resource data. Thus, we conducted a global sensitivity analysis to identify the main parameters driving the variations in the EROI of the system. This novel approach can be applied to any energy system, and we use a real-world case study to illustrate the model: the 2035 Belgian energy system for several greenhouse gas emissions targets.
The main results are threefold: (i) the EROI of the system decreases from 8.9 to 3.9 when greenhouse gas emissions are reduced by 5; (ii) the renewable fuels - mainly imported renewable gas - represent the largest share of the system primary energy mix; (iii) in the sensitivity analysis, the renewable fuels drive 67% of the variation of the EROI of the system for low greenhouse gas emissions scenarios. The decrease in the EROI raises questions about meeting the climate targets without adverse socio-economic impact. Most countries rely massively on fossil fuels, and they could encounter an EROI decline when shifting to carbon neutrality. Thus, this study demonstrates the importance of considering other criteria, such as EROI, in energy system models.
△ Less
Submitted 30 August, 2022; v1 submitted 13 May, 2022;
originally announced May 2022.
-
NRPyElliptic: A Fast Hyperbolic Relaxation Elliptic Solver for Numerical Relativity, I: Conformally Flat, Binary Puncture Initial Data
Authors:
Thiago Assumpcao,
Leonardo R. Werneck,
Terrence Pierre Jacques,
Zachariah B. Etienne
Abstract:
We introduce NRPyElliptic, an elliptic solver for numerical relativity (NR) built within the NRPy+ framework. As its first application, NRPyElliptic sets up conformally flat, binary black hole (BBH) puncture initial data (ID) on a single numerical domain, similar to the widely used TwoPunctures code. Unlike TwoPunctures, NRPyElliptic employs a hyperbolic relaxation scheme, whereby arbitrary ellipt…
▽ More
We introduce NRPyElliptic, an elliptic solver for numerical relativity (NR) built within the NRPy+ framework. As its first application, NRPyElliptic sets up conformally flat, binary black hole (BBH) puncture initial data (ID) on a single numerical domain, similar to the widely used TwoPunctures code. Unlike TwoPunctures, NRPyElliptic employs a hyperbolic relaxation scheme, whereby arbitrary elliptic PDEs are trivially transformed into a hyperbolic system of PDEs. As consumers of NR ID generally already possess expertise in solving hyperbolic PDEs, they will generally find NRPyElliptic easier to tweak and extend than other NR elliptic solvers. When evolved forward in (pseudo)time, the hyperbolic system exponentially reaches a steady state that solves the elliptic PDEs. Notably NRPyElliptic accelerates the relaxation waves, which makes it many orders of magnitude faster than the usual constant-wavespeed approach. While it is still ${\sim}12$x slower than TwoPunctures at setting up full-3D BBH ID, NRPyElliptic requires only ${\approx}0.3\%$ of the runtime for a full BBH simulation in the Einstein Toolkit. Future work will focus on improving performance and generating other types of ID, such as binary neutron star.
△ Less
Submitted 22 April, 2022; v1 submitted 3 November, 2021;
originally announced November 2021.
-
Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds
Authors:
Norberto Jimenez Mena,
Thaneshan Sapanathan,
Pascal J. Jacques,
Aude Simar
Abstract:
The single lap shear test is widely used to measure the strength of dissimilar welds even though such a test brings limited understanding of the intrinsic weld toughness. The present study proposes a numerical finite element (FE) analysis and experimental characterization of dissimilar joints presenting various microstructures (thickness of the intermetallic layer (IML) and hardness profile). For…
▽ More
The single lap shear test is widely used to measure the strength of dissimilar welds even though such a test brings limited understanding of the intrinsic weld toughness. The present study proposes a numerical finite element (FE) analysis and experimental characterization of dissimilar joints presenting various microstructures (thickness of the intermetallic layer (IML) and hardness profile). For this purpose, Friction Melt Bonding (FMB) and Friction Stir Welding (FSW) were used to join aluminum AA6061 and Dual Phase steel (DP980). The FE simulations allowed calculating the evolution of the J-integral near this notch tip. It shows that crack initiation depends significantly on the plastic properties of the welded metallic alloys around the notch tip and the width of the welded zone, which both are significantly different for FSW and FMB processes. Nevertheless, a similar weld fracture toughness J_C of approximately 1 kJ.m-2 is estimated from the analysis for both FMB and FSW. This is three orders of magnitude higher than the fracture toughness of the intermetallic layer, revealing that the plastic dissipation in the Al and steel plates around the crack tip has a major effect on the weld toughness.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics
Authors:
T. Sapanathan,
I. Sabirov,
P. Xia,
M. A. Monclus,
J. M. Molina-Aldareguia,
P. J. Jacques,
A. Simar
Abstract:
A dedicated in situ heating setup in a scanning electron microscope (SEM) followed by an ex situ atomic force microscopy (AFM) and electron backscatter diffraction (EBSD) is used to characterize the nucleation and early growth stages of Fe-Al intermetallics (IMs) at 596 °C. A location tracking is used to interpret further characterization. Ex situ AFM observations reveal a slight shrinkage and out…
▽ More
A dedicated in situ heating setup in a scanning electron microscope (SEM) followed by an ex situ atomic force microscopy (AFM) and electron backscatter diffraction (EBSD) is used to characterize the nucleation and early growth stages of Fe-Al intermetallics (IMs) at 596 °C. A location tracking is used to interpret further characterization. Ex situ AFM observations reveal a slight shrinkage and out of plane protrusion of the IM at the onset of IM nucleation followed by directional growth. The formed interfacial IM compounds were identified by ex situ EBSD. It is now clearly demonstrated that the θ-phase nucleates first prior to the diffusion-controlled growth of the η-phase. The θ-phase prevails the intermetallic layer.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Mycosubtilin Overproduction by Bacillus subtilis BBG100 Enhances the Organism's Antagonistic and Biocontrol Activities
Authors:
Valérie Leclére,
Max Béchet,
Akram Adam,
Jean-Sebastien Guez,
Bernard Wathelet,
Marc Ongena,
Philippe Thonart,
Frédérique Gancel,
Marléne Chollet-Imbert,
Philippe Jacques
Abstract:
A Bacillus subtilis derivative was obtained from strain ATCC 6633 by replacement of the native promoter of the mycosubtilin operon by a constitutive promoter originating from the replication gene repU of the Staphylococcus aureus plasmid pUB110. The recombinant strain, designated BBG100, produced up to 15-fold more mycosubtilin than the wild type produced. The overproducing phenotype was related t…
▽ More
A Bacillus subtilis derivative was obtained from strain ATCC 6633 by replacement of the native promoter of the mycosubtilin operon by a constitutive promoter originating from the replication gene repU of the Staphylococcus aureus plasmid pUB110. The recombinant strain, designated BBG100, produced up to 15-fold more mycosubtilin than the wild type produced. The overproducing phenotype was related to enhancement of the antagonistic activities against several yeasts and pathogenic fungi. Hemolytic activities were also clearly increased in the modified strain. Mass spectrometry analyses of enriched mycosubtilin extracts showed similar patterns of lipopeptides for BBG100 and the wild type. Interestingly, these analyses also revealed a new form of mycosubtilin which was more easily detected in the BBG100 sample. When tested for its biocontrol potential, wild-type strain ATCC 6633 was almost ineffective for reducing a Pythium infection of tomato seedlings. However, treatment of seeds with the BBG100 overproducing strain resulted in a marked increase in the germination rate of seeds. This protective effect afforded by mycosubtilin overproduction was also visualized by the significantly greater fresh weight of emerging seedlings treated with BBG100 compared to controls or seedlings inoculated with the wild-type strain.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Temperature dependence of mycosubtilin homologue production in Bacillus subtilis ATCC6633
Authors:
Patrick Fickers,
Valérie Leclére,
Jean-Sebastien Guez,
Max Béchet,
Françoise Coucheney,
Bernard Joris,
Philippe Jacques
Abstract:
Bacillus subtilis ATCC6633 produces mycosubtilin, a non-ribosomally synthesized lipopeptide of the iturin family which presents antagonistic activities toward various phytopathogens. Different homologues with fatty acid moiety varying from C 15 to C 17 are usually co-produced, with their biological activities increasing with the number of carbons in the fatty acid chain. In the present report, we…
▽ More
Bacillus subtilis ATCC6633 produces mycosubtilin, a non-ribosomally synthesized lipopeptide of the iturin family which presents antagonistic activities toward various phytopathogens. Different homologues with fatty acid moiety varying from C 15 to C 17 are usually co-produced, with their biological activities increasing with the number of carbons in the fatty acid chain. In the present report, we highlight that growth temperature modulates both the extent of mycosubtilin production and the relative abundance of the different homologues. A 30-fold increase in mycosubtilin production was observed when the temperature was decreased from 37 C to 25 C for both strain ATCC6633 and its derivative BBG100, a constitutive mycosubtilin overproducer. However, no significant difference in either the expression of the mycosubtilin synthetase encoding genes or in the intracellular synthetase concentration could be found, suggesting that the observed phenotype originated from a higher mycosubtilin synthetase turnover at lower temperature. We also point out that lower growth temperature leads to an increased proportion of odd-numbered fatty acid homologues as a consequence of de novo synthesis of C 17 anteiso fatty acid following cell adaptation to low temperatures.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Setting up and modelling of overflowing fed-batch cultures of Bacillus subtilis for the production and continuous removal of lipopeptides
Authors:
J. S Guez,
S. Chenikher,
J. Ph Cassar,
P. Jacques
Abstract:
This work is related to the setup of overflowing exponential fed-batch cultures (O-EFBC) derived from carbon limited EFBC dedicated to the production of mycosubtilin, an antifungal lipopeptide belonging to the iturin family. O-EFBC permits the continuous removal of the product from the bioreactor achieving a complete extraction of mycosubtilin. This paper also provides a dynamical Monod-based grow…
▽ More
This work is related to the setup of overflowing exponential fed-batch cultures (O-EFBC) derived from carbon limited EFBC dedicated to the production of mycosubtilin, an antifungal lipopeptide belonging to the iturin family. O-EFBC permits the continuous removal of the product from the bioreactor achieving a complete extraction of mycosubtilin. This paper also provides a dynamical Monod-based growth model of this process that is accurate enough to simulate the evolution of the specific growth rate and to correlate it to the mycosubtilin specific productivity. Two particular and dependant phenomena related to the foam overflow are taken into account by the model: the outgoing flow rate of a broth volume and the loss of biomass. Interestingly, the biomass concentration in the foam was found to be lower than the biomass concentration in the bioreactor relating this process to a recycling one. Parameters of this model are the growth yield on substrate and the maximal specific growth rate estimated from experiments led at feed rates of 0.062, 0.071 and 0.086 h --1. The model was extrapolated to five additional experiments carried out at feed rates of 0.008, 0.022, 0.040, 0.042 and 0.062 h --1 enabling the correlation of the mean specific growth rates with productivity results. Finally, a feed rate of 0.086 h --1 corresponding to a mean specific growth rate of 0.070 h --1 allowed a specific productivity of 1.27 mg of mycosubtilin g --1 of dried biomass h --1 .
△ Less
Submitted 23 August, 2023; v1 submitted 18 September, 2020;
originally announced September 2020.
-
Resistance of the cell wall to degradation is a critical parameter for isolation of high quality RNA from natural isolates of Bacillus subtilis
Authors:
Jean-Sebastien Guez,
François Coutte,
Anne-Sophie Drucbert,
Pierre-Marie Danzé,
Philippe Jacques
Abstract:
Natural isolates of Bacillus subtilis are known for their ability to produce a large panel of bioactive compounds. Unfortunately, their recalcitrance to conventional molecular techniques limits their transcript studies. In this work, diYculties to isolate RNA attributed to the cell wall were overcome, Wnally authorising powerful RT-PCR's.
Natural isolates of Bacillus subtilis are known for their ability to produce a large panel of bioactive compounds. Unfortunately, their recalcitrance to conventional molecular techniques limits their transcript studies. In this work, diYculties to isolate RNA attributed to the cell wall were overcome, Wnally authorising powerful RT-PCR's.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Black Hole Spin Axis in Numerical Relativity
Authors:
Robert Owen,
Alex S. Fox,
John A. Freiberg,
Terrence Pierre Jacques
Abstract:
Colliding black holes are systems of profound interest in both gravitational wave astronomy and in gravitation theory, and a variety of methods have been developed for modeling their dynamics in detail. The features of these dynamics are determined by the masses of the holes and by the magnitudes and axes of their spins. While masses and spin magnitudes can be defined in reasonably unambiguous way…
▽ More
Colliding black holes are systems of profound interest in both gravitational wave astronomy and in gravitation theory, and a variety of methods have been developed for modeling their dynamics in detail. The features of these dynamics are determined by the masses of the holes and by the magnitudes and axes of their spins. While masses and spin magnitudes can be defined in reasonably unambiguous ways, the spin axis is a concept which despite great physical importance is seriously undermined by the coordinate freedom of general relativity. Despite a great wealth of detailed numerical simulations of generic spinning black hole collisions, very little attention has gone into defining or justifying the definitions of the spin axis used in the numerical relativity literature. In this paper, we summarize and contrast the various spin direction measures available in the SpEC code, including a comparison with a method common in other codes, we explain why these measures have shown qualitatively different nutation features than one would expect from post-Newtonian theory, and we derive and implement new measures that give much better agreement.
△ Less
Submitted 24 October, 2018; v1 submitted 24 August, 2017;
originally announced August 2017.
-
Burkholderia genome mining for nonribosomal peptide synthetases reveals a great potential for novel siderophores and lipopeptides synthesis
Authors:
Qassim Esmaeel,
Maude Pupin,
Nam Phuong Kieu,
Gabrielle Chataigné,
Max Béchet,
Jovana Deravel,
François Krier,
Monica Höfte,
Philippe Jacques,
Valérie Leclère
Abstract:
Burkholderia is an important genus encompassing a variety of species, including pathogenic strains as well as strains that promote plant growth. We have carried out a global strategy, which combined two complementary approaches. The first one is genome guided with deep analysis of genome sequences and the second one is assay guided with experiments to support the predictions obtained in silico. Th…
▽ More
Burkholderia is an important genus encompassing a variety of species, including pathogenic strains as well as strains that promote plant growth. We have carried out a global strategy, which combined two complementary approaches. The first one is genome guided with deep analysis of genome sequences and the second one is assay guided with experiments to support the predictions obtained in silico. This efficient screening for new secondary metabolites, performed on 48 gapless genomes of Burkholderia species, revealed a total of 161 clusters containing nonribosomal peptide synthetases (NRPSs), with the potential to synthesize at least 11 novel products. Most of them are siderophores or lipopeptides, two classes of products with potential application in biocontrol. The strategy led to the identification, for the first time, of the cluster for cepaciachelin biosynthesis in the genome of Burkholderia ambifaria AMMD and a cluster corresponding to a new malleobactin-like siderophore, called phymabactin, was identified in Burkholderia phymatum STM815 genome. In both cases, the siderophore was produced when the strain was grown in iron-limited conditions. Elsewhere, the cluster for the antifungal burkholdin was detected in the genome of B. ambifaria AMMD and also Burkholderia sp. KJ006. Burkholderia pseudomallei strains harbor the genetic potential to produce a novel lipopeptide called burkhomycin, containing a peptidyl moiety of 12 monomers. A mixture of lipopeptides produced by Burkholderia rhizoxinica lowered the surface tension of the supernatant from 70 to 27 mN/m. The production of nonribosomal secondary metabolites seems related to the three phylogenetic groups obtained from 16S rRNA sequences. Moreover, the genome-mining approach gave new insights into the nonribosomal synthesis exemplified by the identification of dual C/E domains in lipopeptide NRPSs, up to now essentially found in Pseudomonas strains.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
Schottky barrier lowering with the formation of crystalline Er silicide on n-Si upon thermal annealing
Authors:
Nicolas Reckinger,
Xiaohui Tang Vincent Bayot,
Dmitri A. Yarekha,
Emmanuel Dubois,
Sylvie Godey,
Xavier Wallart,
Guilhem Larrieu,
Adam Laszcz,
Jacek Ratajczak,
Pascal J. Jacques,
Jean-Pierre Raskin
Abstract:
The evolution of the Schottky barrier height (SBH) of Er silicide contacts to n-Si is investigated as a function of the annealing temperature. The SBH is found to drop substantially from 0.43 eV for the as-deposited sample to reach 0.28 eV, its lowest value, at 450 C. By x-ray diffraction, high resolution transmission electron microscopy, and x-ray photoelectron spectroscopy, the decrease in the S…
▽ More
The evolution of the Schottky barrier height (SBH) of Er silicide contacts to n-Si is investigated as a function of the annealing temperature. The SBH is found to drop substantially from 0.43 eV for the as-deposited sample to reach 0.28 eV, its lowest value, at 450 C. By x-ray diffraction, high resolution transmission electron microscopy, and x-ray photoelectron spectroscopy, the decrease in the SBH is shown to be associated with the progressive formation of crystalline ErSi2-x.
△ Less
Submitted 25 October, 2011;
originally announced October 2011.
-
Unveiling quantum Hall transport by Efros-Shklovskii to Mott variable range hop** transition with Graphene
Authors:
Keyan Bennaceur,
Patrice Jacques,
Fabien Portier,
P. Roche,
D. C. Glattli
Abstract:
The quantum localization in the quantum Hall regime is revisited using Graphene monolayers with accurate measurements of the longitudinal resistivity as a function of temperature and current. We experimentally show for the first time a cross-over from Efros-Shklovskii Variable Range Hop** (VRH) conduction regime with Coulomb interactions to a Mott VRH regime without interaction. This occurs at H…
▽ More
The quantum localization in the quantum Hall regime is revisited using Graphene monolayers with accurate measurements of the longitudinal resistivity as a function of temperature and current. We experimentally show for the first time a cross-over from Efros-Shklovskii Variable Range Hop** (VRH) conduction regime with Coulomb interactions to a Mott VRH regime without interaction. This occurs at Hall plateau transitions for localization lengths larger than the interaction screening length set by the nearby gate. Measurements of the scaling exponents of the conductance peak widths with both temperature and current give the first validation of the Polyakov-Shklovskii scenario that VRH alone is sufficient to describe conductance in the Quantum Hall regime and that the usual assumption of a metallic conduction regime on conductance peaks is unnecessary.
△ Less
Submitted 10 September, 2010; v1 submitted 9 September, 2010;
originally announced September 2010.
-
Grid Based Monitoring on the Rutgers CDF Analysis Farm
Authors:
P. Jacques,
F. Ratnikov,
I. Terekhov,
T. Watts
Abstract:
Run II at the Fermilab Tevatron Collider started in March 2001, and it will continue probing the high energy frontier in particle physics until the start of the LHC at CERN. The CDF collaboration at Fermilab has already stored 260 TB of data and expects to store 1PB of data in the next two years. The HEXCAF computing farm is being set up at Rutgers University to provide the software environment,…
▽ More
Run II at the Fermilab Tevatron Collider started in March 2001, and it will continue probing the high energy frontier in particle physics until the start of the LHC at CERN. The CDF collaboration at Fermilab has already stored 260 TB of data and expects to store 1PB of data in the next two years. The HEXCAF computing farm is being set up at Rutgers University to provide the software environment, computing resources, and access to data for physicists participating in the Collaboration. Some job submission, detector data access and storage of the output results are based on the SAM-GRID tools. To extend monitoring for these jobs running on the farm a bridge was developed between the SAM-GRID monitoring tools and the internal farm monitoring. This presentation will describe the configuration and functionality of the HEXCAF farm with the emphasis on the monitoring tools. Finally we summarize our experience of installing and operating a GRID environment on a remote cluster that is being used for real physics studies in the big running experiment.
△ Less
Submitted 15 June, 2003;
originally announced June 2003.