Showing 1–50 of 51 results for author: Jackson, W

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

A quantitative investigation for deployment of mobile collaborative robots in high-value manufacturing

Authors: Amine Hifi, W. Jackson, C. Loukas, M. Shields, A. Poole, E. Mohseni, C. N. MacLeod, G. Dobie, S. G. Pierce, T. O'Hare, G. Munro, J. O'Brian-O'Reilly, R. W. K. Vithanage

Abstract: Component inspection is often the bottleneck in high-value manufacturing, driving industries like aerospace toward automated inspection technologies. Current systems often employ fixed arm robots, but they lack the flexibility in adapting to new components or orientations Advanced mobile robotic platforms with updated sensor technologies and algorithms have improved localization and path planning… ▽ More Component inspection is often the bottleneck in high-value manufacturing, driving industries like aerospace toward automated inspection technologies. Current systems often employ fixed arm robots, but they lack the flexibility in adapting to new components or orientations Advanced mobile robotic platforms with updated sensor technologies and algorithms have improved localization and path planning capabilities, making them ideal for bringing inspection processes directly to parts. However, mobile platforms introduce challenges in localization and maneuverability, leading to potential errors. Their positional uncertainty is higher than fixed systems due to the lack of a fixed calibrated location, posing challenges for position-sensitive inspection sensors. Therefore, it's essential to assess the positional accuracy and repeatability of mobile manipulator platforms. The KUKA KMR iiwa was chosen for its collaborative features, robust build, and scalability within the KUKA product range. The accuracy and repeatability of the mobile platform were evaluated through a series of tests to evaluate the performance of its integrated feature map**, the effect of various speeds on positional accuracy, and the efficiency of the omnidirectional wheels for a range of translation orientations. Experimental evaluation revealed that enabling feature map** substantially improves the KUKA KMR iiwa's performance, with accuracy gains and error reductions exceeding 90%. Repeatability errors were under 7 mm with map** activated and around 2.5 mm in practical scenarios, demonstrating that mobile manipulators, incorporating both the manipulator and platform, can fulfil the precise requirements of industries with high precision needs. Providing a highly diverse alternative to traditional fixed-base industrial manipulators. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Triple O'Nan Configurations in Buekenhout-Metz Unitals of Odd Order

Authors: Wen-Ai Jackson, Peter Wild

Abstract: An O'Nan configuration in a unital is a set of four lines forming a quadrilateral, where the six intersections of pairs of lines are points of the unital. In 2019 Feng and Li elegantly construct O'Nan configurations in Buekenhout-Metz unitals, in particular, for odd order unitals. We extend their work by showing the existence of Triple O'Nan configurations (a configuration containing three distinc… ▽ More An O'Nan configuration in a unital is a set of four lines forming a quadrilateral, where the six intersections of pairs of lines are points of the unital. In 2019 Feng and Li elegantly construct O'Nan configurations in Buekenhout-Metz unitals, in particular, for odd order unitals. We extend their work by showing the existence of Triple O'Nan configurations (a configuration containing three distinct O'Nan configurations) in these odd order Buekenhout-Metz unitals. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 30 pages, 2 figures

A Note on Fano Planes in Orthogonal Buekenhout-Metz Unitals of Even Order

Authors: Wen-Ai Jackson, Peter Wild

Abstract: An O'Nan configuration in a unital is a set of four lines forming a quadrilateral, where the six intersections of pairs of lines are points of the unital. In 2019 Feng and Li elegantly construct O'Nan configurations in orthogonal and Tits Buekenhout-Metz unitals. We extend their work by extending their construction to a Fano plane embedded in the orthogonal Buekenhout-Metz unital of even order. We… ▽ More An O'Nan configuration in a unital is a set of four lines forming a quadrilateral, where the six intersections of pairs of lines are points of the unital. In 2019 Feng and Li elegantly construct O'Nan configurations in orthogonal and Tits Buekenhout-Metz unitals. We extend their work by extending their construction to a Fano plane embedded in the orthogonal Buekenhout-Metz unital of even order. We deduce that there exist O'Nan configurations in orthogonal Buekenhout-Metz unitals different to those of Feng and Li, and make a conjecture about Fano planes embedded in orthogonal Buekenhout-Metz unitals. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Two-interface and thin filament approximation in Hele--Shaw channel flow

Authors: Michael C Dallaston, Michael J W Jackson, Liam C Morrow, Scott W McCue

Abstract: When a viscous fluid partially fills a Hele--Shaw channel, and is pushed by a pressure difference, the fluid interface is unstable due to the Saffman--Taylor instability. We consider the evolution of a fluid region of finite extent, bounded between two interfaces, in the limit the interfaces are close, that is, when the fluid region is a thin liquid filament separating two gases of different press… ▽ More When a viscous fluid partially fills a Hele--Shaw channel, and is pushed by a pressure difference, the fluid interface is unstable due to the Saffman--Taylor instability. We consider the evolution of a fluid region of finite extent, bounded between two interfaces, in the limit the interfaces are close, that is, when the fluid region is a thin liquid filament separating two gases of different pressure. In this limit, we derive a second-order `thin filament' model that describes the normal velocity of the filament centreline, and evolution of the filament thickness, as functions of the thickness, centreline curvature and their derivatives. We show that the second-order terms in this model, that include the effect of transverse flow along the filament, are necessary to regularise the instability. Numerical simulation of the thin filament model is shown to be in accordance with level-set computations of the complete two-interface model. Solutions ultimately evolve to form a bubble of rapidly increasing radius and decreasing thickness. △ Less

Submitted 17 May, 2024; v1 submitted 17 August, 2023; originally announced August 2023.

The James Webb Space Telescope Mission

Authors: Jonathan P. Gardner, John C. Mather, Randy Abbott, James S. Abell, Mark Abernathy, Faith E. Abney, John G. Abraham, Roberto Abraham, Yasin M. Abul-Huda, Scott Acton, Cynthia K. Adams, Evan Adams, David S. Adler, Maarten Adriaensen, Jonathan Albert Aguilar, Mansoor Ahmed, Nasif S. Ahmed, Tanjira Ahmed, Rüdeger Albat, Loïc Albert, Stacey Alberts, David Aldridge, Mary Marsha Allen, Shaune S. Allen, Martin Altenburg , et al. (983 additional authors not shown)

Abstract: Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astrono… ▽ More Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figures

The feet of orthogonal Buekenhout-Metz unitals

Authors: S. G. Barwick, W. -A. Jackson, P. Wild

Abstract: In this article we look at the geometric structure of the feet of an orthogonal Buekenhout-Metz unital U in PG(2,q^2). We show that the feet of each point form a set of type (0,1,2,4). Further, we discuss the structure of any 4-secants, and determine exactly when the feet form an arc. In this article we look at the geometric structure of the feet of an orthogonal Buekenhout-Metz unital U in PG(2,q^2). We show that the feet of each point form a set of type (0,1,2,4). Further, we discuss the structure of any 4-secants, and determine exactly when the feet form an arc. △ Less

Submitted 10 November, 2022; v1 submitted 18 October, 2022; originally announced October 2022.

MSC Class: 51E20

How does Imaging Impact Patient Flow in Emergency Departments?

Authors: Vishnunarayan Girishan Prabhu, Kevin Taaffe, Marisa Shehan, Ronald Pirrallo, William Jackson, Michael Ramsay, Jessica Hobbs

Abstract: Emergency Department (ED) overcrowding continues to be a public health issue as well as a patient safety issue. The underlying factors leading to ED crowding are numerous, varied, and complex. Although lack of in-hospital beds is frequently attributed as the primary reason for crowding, ED's dependencies on other ancillary resources, including imaging, consults, and labs, also contribute to crowdi… ▽ More Emergency Department (ED) overcrowding continues to be a public health issue as well as a patient safety issue. The underlying factors leading to ED crowding are numerous, varied, and complex. Although lack of in-hospital beds is frequently attributed as the primary reason for crowding, ED's dependencies on other ancillary resources, including imaging, consults, and labs, also contribute to crowding. Using retrospective data associated with imaging, including delays, processing time, and the number of image orders, from a large tier 1 trauma center, we developed a discrete event simulation model to identify the impact of the imaging delays and bundling image orders on patient time in the ED. Results from sensitivity analysis show that reducing the delays associated with imaging and bundling as few as 10% of imaging orders for certain patients can significantly (p-value < 0.05) reduce the time a patient spends in the ED. △ Less

Submitted 23 September, 2022; originally announced September 2022.

DDSP-based Singing Vocoders: A New Subtractive-based Synthesizer and A Comprehensive Evaluation

Authors: Da-Yi Wu, Wen-Yi Hsiao, Fu-Rong Yang, Oscar Friedman, Warren Jackson, Scott Bruzenak, Yi-Wen Liu, Yi-Hsuan Yang

Abstract: A vocoder is a conditional audio generation model that converts acoustic features such as mel-spectrograms into waveforms. Taking inspiration from Differentiable Digital Signal Processing (DDSP), we propose a new vocoder named SawSing for singing voices. SawSing synthesizes the harmonic part of singing voices by filtering a sawtooth source signal with a linear time-variant finite impulse response… ▽ More A vocoder is a conditional audio generation model that converts acoustic features such as mel-spectrograms into waveforms. Taking inspiration from Differentiable Digital Signal Processing (DDSP), we propose a new vocoder named SawSing for singing voices. SawSing synthesizes the harmonic part of singing voices by filtering a sawtooth source signal with a linear time-variant finite impulse response filter whose coefficients are estimated from the input mel-spectrogram by a neural network. As this approach enforces phase continuity, SawSing can generate singing voices without the phase-discontinuity glitch of many existing vocoders. Moreover, the source-filter assumption provides an inductive bias that allows SawSing to be trained on a small amount of data. Our experiments show that SawSing converges much faster and outperforms state-of-the-art generative adversarial network and diffusion-based vocoders in a resource-limited scenario with only 3 training recordings and a 3-hour training time. △ Less

Submitted 18 August, 2022; v1 submitted 9 August, 2022; originally announced August 2022.

Comments: Accepted at ISMIR 2022

Journal ref: International Society for Music Information Retrieval (ISMIR) 2022

The Science Performance of JWST as Characterized in Commissioning

Authors: Jane Rigby, Marshall Perrin, Michael McElwain, Randy Kimble, Scott Friedman, Matt Lallo, René Doyon, Lee Feinberg, Pierre Ferruit, Alistair Glasse, Marcia Rieke, George Rieke, Gillian Wright, Chris Willott, Knicole Colon, Stefanie Milam, Susan Neff, Christopher Stark, Jeff Valenti, Jim Abell, Faith Abney, Yasin Abul-Huda, D. Scott Acton, Evan Adams, David Adler , et al. (601 additional authors not shown)

Abstract: This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries f… ▽ More This paper characterizes the actual science performance of the James Webb Space Telescope (JWST), as determined from the six month commissioning period. We summarize the performance of the spacecraft, telescope, science instruments, and ground system, with an emphasis on differences from pre-launch expectations. Commissioning has made clear that JWST is fully capable of achieving the discoveries for which it was built. Moreover, almost across the board, the science performance of JWST is better than expected; in most cases, JWST will go deeper faster than expected. The telescope and instrument suite have demonstrated the sensitivity, stability, image quality, and spectral range that are necessary to transform our understanding of the cosmos through observations spanning from near-earth asteroids to the most distant galaxies. △ Less

Submitted 10 April, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 5th version as accepted to PASP; 31 pages, 18 figures; https://iopscience.iop.org/article/10.1088/1538-3873/acb293

Journal ref: PASP 135 048001 (2023)

The Target Study: A Conceptual Model and Framework for Measuring Disparity

Authors: John W. Jackson, Yea-Jen Hsu, Raquel C. Greer, Romsai T. Boonyasai, Chanelle J. Howe

Abstract: We present a conceptual model to measure disparity--the target study--where social groups may be similarly situated (i.e., balanced) on allowable covariates. Our model, based on a sampling design, does not intervene to assign social group membership or alter allowable covariates. To address non-random sample selection, we extend our model to generalize or transport disparity or to assess disparity… ▽ More We present a conceptual model to measure disparity--the target study--where social groups may be similarly situated (i.e., balanced) on allowable covariates. Our model, based on a sampling design, does not intervene to assign social group membership or alter allowable covariates. To address non-random sample selection, we extend our model to generalize or transport disparity or to assess disparity after an intervention on eligibility-related variables that eliminates forms of collider-stratification. To avoid bias from differential timing of enrollment, we aggregate time-specific study results by balancing calendar time of enrollment across social groups. To provide a framework for emulating our model, we discuss study designs, data structures, and G-computation and weighting estimators. We compare our sampling-based model to prominent decomposition-based models used in healthcare and algorithmic fairness. We provide R code for all estimators and apply our methods to measure health system disparities in hypertension control using electronic medical records. △ Less

Submitted 16 March, 2024; v1 submitted 1 July, 2022; originally announced July 2022.

Comments: Completely re-written for a clearer and more formal presentation with added results for generalizability and transportability and a more detailed comparison to alternative models

Multireference configuration interaction study of the predissociation of C$_{2}$ via its $F\,^1Π_u$ state

Authors: Zhongxing Xu, S. R. Federman, William M. Jackson, Cheuk-Yiu Ng, Lee-** Wang, Kyle N. Crabtree

Abstract: Photodissociation is one of the main destruction pathways for dicarbon (C$_{2}$) in astronomical environments such as diffuse interstellar clouds, yet the accuracy of modern astrochemical models is limited by a lack of accurate photodissociation cross sections in the vacuum ultraviolet range. C$_{2}$ features a strong predissociative $F\,^1Π_u - X\,^1Σ_g^+$ electronic transition near 130 nm origin… ▽ More Photodissociation is one of the main destruction pathways for dicarbon (C$_{2}$) in astronomical environments such as diffuse interstellar clouds, yet the accuracy of modern astrochemical models is limited by a lack of accurate photodissociation cross sections in the vacuum ultraviolet range. C$_{2}$ features a strong predissociative $F\,^1Π_u - X\,^1Σ_g^+$ electronic transition near 130 nm originally measured in 1969; however, no experimental studies of this transition have been carried out since, and theoretical studies of the $F\,^1Π_u$ state are limited. In this work, potential energy curves of excited electronic states of C$_{2}$ are calculated with the aim of describing the predissociative nature of the $F\,^1Π_u$ state and providing new ab initio photodissociation cross sections for astrochemical applications. Accurate electronic calculations of 56 singlet, triplet, and quintet states are carried out at the DW-SA-CASSCF/MRCI+Q level of theory with a CAS(8,12) active space and the aug-cc-pV5Z basis set augmented with additional diffuse functions. Photodissociation cross sections arising from the vibronic ground state to the $F\,^1Π_u$ state are calculated by a coupled-channel model. The total integrated cross section through the $F\,^1Π_u$ $v=0$ and $v=1$ bands is 1.198$\times$10$^{-13} $cm$^2$cm$^{-1}$, giving rise to a photodissociation rate of 5.02$\times$10$^{-10}$ s$^{-1}$ under the standard interstellar radiation field, much larger than the rate in the Leiden photodissociation database. In addition, we report a new $2\,^1Σ_u^+$ state that should be detectable via a strong $2\,^1Σ_u^+-X\,^1Σ_g^+$ band around 116 nm. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Comments: 33 pages, 13 figures; Accepted by The Journal of Chemical Physics

Reentrant Rigidity Percolation in Structurally Correlated Filamentous Networks

Authors: Jonathan Michel, Gabriel von Kessel, Thomas Wyse Jackson, Lawrence J. Bonassar, Itai Cohen, Moumita Das

Abstract: Many biological tissues feature a heterogeneous network of fibers whose tensile and bending rigidity contribute substantially to these tissues' elastic properties. Rigidity percolation has emerged as a important paradigm for relating these filamentous tissues' mechanics to the concentrations of their constituents. Past studies have generally considered tuning of networks by spatially homogeneous v… ▽ More Many biological tissues feature a heterogeneous network of fibers whose tensile and bending rigidity contribute substantially to these tissues' elastic properties. Rigidity percolation has emerged as a important paradigm for relating these filamentous tissues' mechanics to the concentrations of their constituents. Past studies have generally considered tuning of networks by spatially homogeneous variation in concentration, while ignoring structural correlation. We here introduce a model in which dilute fiber networks are built in a correlated manner that produces alternating sparse and dense regions. Our simulations indicate that structural correlation consistently allows tissues to attain rigidity with less material. We further find that the percolation threshold varies non-monotonically with the degree of correlation, such that it decreases with moderate correlation and once more increases for high correlation. We explain the eventual reentrance in the dependence of the rigidity percolation threshold on correlation as the consequence of large, stiff clusters that are too poorly coupled to transmit forces across the network. Our study offers deeper understanding of how spatial heterogeneity may enable tissues to robustly adapt to different mechanical contexts. △ Less

Submitted 26 April, 2022; originally announced April 2022.

Comments: This article contains 10 pages and 5 figures

The Notre-Dame Cube: An active-target time-projection chamber for radioactive beam experiments and detector development

Authors: T. Ahn, J. S. Randhawa, S. Aguilar, D. Blankstein, L. Delgado, N. Dixneuf, S. L. Henderson, W. Jackson, L. Jensen, S. **, J. Koci, J. J. Kolata, J. Lai, J. Levano, X. Li, A. Mubarak, P. D. O'Malley, S. Rameriz Martin, M. Renaud, M. Z. Serikow, A. Tollefson, J. Wilson, L. Yan

Abstract: Active-target detectors have the potential to address the difficulties associated with the low intensities of radioactive beams. We have developed an active-target detector, the Notre Dame Cube (ND-Cube), to perform experiments with radioactive beams produced at $\mathit{TwinSol}$ and to aid in the development of active-target techniques. Various aspects of the ND-Cube and its design were characte… ▽ More Active-target detectors have the potential to address the difficulties associated with the low intensities of radioactive beams. We have developed an active-target detector, the Notre Dame Cube (ND-Cube), to perform experiments with radioactive beams produced at $\mathit{TwinSol}$ and to aid in the development of active-target techniques. Various aspects of the ND-Cube and its design were characterized. The ND-Cube was commissioned with a $^{7}$Li beam for measuring $^{40}$Ar + $^{7}$Li fusion reaction cross sections and investigating $^{7}$Li($α$,$α$)$^{7}$Li scattering events. The ND-Cube will be used to study a range of reactions using light radioactive ions produced at low energy. △ Less

Submitted 23 June, 2021; originally announced June 2021.

Comments: 13 pages, 12 figures

Deep Learning for Network Traffic Classification

Authors: Niloofar Bayat, Weston Jackson, Derrick Liu

Abstract: Monitoring network traffic to identify content, services, and applications is an active research topic in network traffic control systems. While modern firewalls provide the capability to decrypt packets, this is not appealing for privacy advocates. Hence, identifying any information from encrypted traffic is a challenging task. Nonetheless, previous work has identified machine learning methods th… ▽ More Monitoring network traffic to identify content, services, and applications is an active research topic in network traffic control systems. While modern firewalls provide the capability to decrypt packets, this is not appealing for privacy advocates. Hence, identifying any information from encrypted traffic is a challenging task. Nonetheless, previous work has identified machine learning methods that may enable application and service identification. The process involves high level feature extraction from network packet data then training a robust machine learning classifier for traffic identification. We propose a classification technique using an ensemble of deep learning architectures on packet, payload, and inter-arrival time sequences. To our knowledge, this is the first time such deep learning architectures have been applied to the Server Name Indication (SNI) classification problem. Our ensemble model beats the state of the art machine learning methods and our up-to-date model can be found on github: \url{https://github.com/niloofarbayat/NetworkClassification} △ Less

Submitted 2 June, 2021; originally announced June 2021.

Structural Origins of Cartilage Shear Mechanics

Authors: Thomas Wyse Jackson, Jonathan Michel, Pancy Lwin, Lisa A. Fortier, Moumita Das, Lawrence J. Bonassar, Itai Cohen

Abstract: Healthy cartilage is a remarkable tissue, able to withstand tens of millions of loading cycles with minimal damage. While much is known about the structural origins of its compressive mechanics, how composition determines its mechanical behavior in shear, a major mode of failure, is poorly understood. Through a combination of microscale structure-function experiments and modeling, we develop a rig… ▽ More Healthy cartilage is a remarkable tissue, able to withstand tens of millions of loading cycles with minimal damage. While much is known about the structural origins of its compressive mechanics, how composition determines its mechanical behavior in shear, a major mode of failure, is poorly understood. Through a combination of microscale structure-function experiments and modeling, we develop a rigidity percolation framework to explain the structural origins of cartilage shear mechanics. This framework provides a new quantitative understanding for how the known degradative events in osteoarthritis determine the mechanical changes that are a hallmark of this disease. As such, this work provides a road map for understanding disease progression and in combination with non-invasive techniques such as MRI will enable more effective diagnosis and treatment. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: 9 pages, 3 pages of SI, 5 figures

An Improved Framework of GPU Computing for CFD Applications on Structured Grids using OpenACC

Authors: Weicheng Xue, Charles W. Jackson, Christoper J. Roy

Abstract: This paper is focused on improving multi-GPU performance of a research CFD code on structured grids. MPI and OpenACC directives are used to scale the code up to 16 GPUs. This paper shows that using 16 P100 GPUs and 16 V100 GPUs can be 30$\times$ and 70$\times$ faster than 16 Xeon CPU E5-2680v4 cores for three different test cases, respectively. A series of performance issues related to the scaling… ▽ More This paper is focused on improving multi-GPU performance of a research CFD code on structured grids. MPI and OpenACC directives are used to scale the code up to 16 GPUs. This paper shows that using 16 P100 GPUs and 16 V100 GPUs can be 30$\times$ and 70$\times$ faster than 16 Xeon CPU E5-2680v4 cores for three different test cases, respectively. A series of performance issues related to the scaling for the multi-block CFD code are addressed by applying various optimizations. Performance optimizations such as the pack/unpack message method, removing temporary arrays as arguments to procedure calls, allocating global memory for limiters and connected boundary data, reordering non-blocking MPI I\_send/I\_recv and Wait calls, reducing unnecessary implicit derived type member data movement between the host and the device and the use of GPUDirect can improve the compute utilization, memory throughput, and asynchronous progression in the multi-block CFD code using modern programming features. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 43 pages, 27 figures

Rigidity and fracture of fibrous double networks

Authors: Pancy Lwin, Andrew Sindermann, Leo Sutter, Thomas Wyse Jackson, Lawrence Bonassar, Itai Cohen, Moumita Das

Abstract: Tunable mechanics and fracture resistance are hallmarks of biological tissues and highly desired in engineered materials. To elucidate the underlying mechanisms, we study a rigidly percolating double network (DN) made of a stiff and a flexible network. The DN shows remarkable tunability in mechanical response when the stiff network is just above its rigidity percolation threshold and minimal chang… ▽ More Tunable mechanics and fracture resistance are hallmarks of biological tissues and highly desired in engineered materials. To elucidate the underlying mechanisms, we study a rigidly percolating double network (DN) made of a stiff and a flexible network. The DN shows remarkable tunability in mechanical response when the stiff network is just above its rigidity percolation threshold and minimal changes far from this threshold. Further, the DN can be modulated to either be extensible, breaking gradually, or stronger, breaking in a more brittle fashion by varying the flexible network's concentration. △ Less

Submitted 22 August, 2020; originally announced August 2020.

Comments: 5 Pages, 4 Figures

Error Autocorrelation Objective Function for Improved System Modeling

Authors: Anand Ramakrishnan, Warren B. Jackson, Kent Evans

Abstract: Deep learning models are trained to minimize the error between the model's output and the actual values. The typical cost function, the Mean Squared Error (MSE), arises from maximizing the log-likelihood of additive independent, identically distributed Gaussian noise. However, minimizing MSE fails to minimize the residuals' cross-correlations, leading to over-fitting and poor extrapolation of the… ▽ More Deep learning models are trained to minimize the error between the model's output and the actual values. The typical cost function, the Mean Squared Error (MSE), arises from maximizing the log-likelihood of additive independent, identically distributed Gaussian noise. However, minimizing MSE fails to minimize the residuals' cross-correlations, leading to over-fitting and poor extrapolation of the model outside the training set (generalization). In this paper, we introduce a "whitening" cost function, the Ljung-Box statistic, which not only minimizes the error but also minimizes the correlations between errors, ensuring that the fits enforce compatibility with an independent and identically distributed (i.i.d) gaussian noise model. The results show significant improvement in generalization for recurrent neural networks (RNNs) (1d) and image autoencoders (2d). Specifically, we look at both temporal correlations for system-id in simulated and actual mechanical systems. We also look at spatial correlation in vision autoencoders to demonstrate that the whitening objective functions lead to much better extrapolation--a property very desirable for reliable control systems. △ Less

Submitted 11 May, 2021; v1 submitted 8 August, 2020; originally announced August 2020.

Comments: 7 pages, 3 Figures, 8 Tables

Comprehensive Characterization of Terahertz Generation with the Organic Crystal BNA

Authors: Isaac C. Tangen, Gabriel A. Valdivida-Berroeta, Larry K. Heki, Zachary B. Zaccardi, Erika W. Jackson, Charles B. Bahr, David J. Michaelis, Jeremy A. Johnson

Abstract: We characterize the terahertz (THz) generation of N-benzyl-2-methyl-4-nitroaniline (BNA), with crystals ranging in thickness from 123-700 μm. We compare excitation using 800-nm and 1250 to 1500-nm wavelengths. Pum** BNA with 800-nm wavelengths and longer near-infrared wavelengths results in a broad spectrum, producing out to 6 THz using a 100-fs pump, provided the BNA crystal is thin enough. ~20… ▽ More We characterize the terahertz (THz) generation of N-benzyl-2-methyl-4-nitroaniline (BNA), with crystals ranging in thickness from 123-700 μm. We compare excitation using 800-nm and 1250 to 1500-nm wavelengths. Pum** BNA with 800-nm wavelengths and longer near-infrared wavelengths results in a broad spectrum, producing out to 6 THz using a 100-fs pump, provided the BNA crystal is thin enough. ~200 μm or thinner crystals are required to produce a broad spectrum with an 800-nm pump, whereas ~300 μm thick crystals are optimal for broadband THz generation using the longer wavelengths. We report the favorable THz generation and optical characteristics of our BNA crystals that make them attractive for broadband, high-field THz generation, and we also find significant differences to BNA results reported in other works. △ Less

Submitted 13 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 7 pages, 5 figures

Meaningful causal decompositions in health equity research: definition, identification, and estimation through a weighting framework

Authors: John W. Jackson

Abstract: Causal decomposition analyses can help build the evidence base for interventions that address health disparities (inequities). They ask how disparities in outcomes may change under hypothetical intervention. Through study design and assumptions, they can rule out alternate explanations such as confounding, selection-bias, and measurement error, thereby identifying potential targets for interventio… ▽ More Causal decomposition analyses can help build the evidence base for interventions that address health disparities (inequities). They ask how disparities in outcomes may change under hypothetical intervention. Through study design and assumptions, they can rule out alternate explanations such as confounding, selection-bias, and measurement error, thereby identifying potential targets for intervention. Unfortunately, the literature on causal decomposition analysis and related methods have largely ignored equity concerns that actual interventionists would respect, limiting their relevance and practical value. This paper addresses these concerns by explicitly considering what covariates the outcome disparity and hypothetical intervention adjust for (so-called allowable covariates) and the equity value judgements these choices convey, drawing from the bioethics, biostatistics, epidemiology, and health services research literatures. From this discussion, we generalize decomposition estimands and formulae to incorporate allowable covariate sets, to reflect equity choices, while still allowing for adjustment of non-allowable covariates needed to satisfy causal assumptions. For these general formulae, we provide weighting-based estimators based on adaptations of ratio-of-mediator-probability and inverse-odds-ratio weighting. We discuss when these estimators reduce to already used estimators under certain equity value judgements, and a novel adaptation under other judgements. △ Less

Submitted 15 September, 2020; v1 submitted 22 September, 2019; originally announced September 2019.

Comments: 39 pages, 1 Table and 1 Figure in the main text, 1 Figure in the Supplement. Notational system changed for clarity

Exploring Challenges and Opportunities in Cybersecurity Risk and Threat Communications Related To The Medical Internet Of Things (MIoT)

Authors: George W. Jackson, Jr., Shawon Rahman

Abstract: As device interconnectivity and ubiquitous computing continues to proliferate healthcare, the Medical Internet of Things (MIoT), also well known as the, Internet of Medical Things (IoMT) or the Internet of Healthcare Things (IoHT), is certain to play a major role in the health, and well-being of billions of people across the globe. When it comes to issues of cybersecurity risks and threats connect… ▽ More As device interconnectivity and ubiquitous computing continues to proliferate healthcare, the Medical Internet of Things (MIoT), also well known as the, Internet of Medical Things (IoMT) or the Internet of Healthcare Things (IoHT), is certain to play a major role in the health, and well-being of billions of people across the globe. When it comes to issues of cybersecurity risks and threats connected to the IoT in all of its various flavors the emphasis has been on technical challenges and technical solution. However, especially in the area of healthcare there is another substantial and potentially grave challenge. It is the challenge of thoroughly and accurately communicating the nature and extent of cybersecurity risks and threats to patients who are reliant upon these interconnected healthcare technologies to improve and even preserve their lives. This case study was conducted to assess the scope and depth of cybersecurity risk and threat communications delivered to an extremely vulnerable patient population, semi-structured interviews were held with cardiac medical device specialists across the United States. This research contributes scientific data in the field of healthcare cybersecurity and assists scholars and practitioners in advancing education and research in the field of MIoT patient communications. △ Less

Submitted 1 August, 2019; originally announced August 2019.

Ab initio Study of Ground-State CS Photodissociation Via Highly Excited Electronic States

Authors: Zhongxing Xu, Nan Luo, S. R. Federman, William M. Jackson, Cheuk-Yiu Ng, Lee-** Wang, Kyle N. Crabtree

Abstract: Photodissociation by ultraviolet radiation is the key destruction pathway for CS in photon-dominated regions, such as diffuse clouds. However, the large uncertainties of photodissociation cross sections and rates of CS, resulting from a lack of both laboratory experiments and theoretical calculations, limit the accuracy of calculated abundances of S-bearing molecules by modern astrochemical models… ▽ More Photodissociation by ultraviolet radiation is the key destruction pathway for CS in photon-dominated regions, such as diffuse clouds. However, the large uncertainties of photodissociation cross sections and rates of CS, resulting from a lack of both laboratory experiments and theoretical calculations, limit the accuracy of calculated abundances of S-bearing molecules by modern astrochemical models. Here we show a detailed \textit{ab initio} study of CS photodissociation. Accurate potential energy curves of CS electronic states were obtained by choosing an active space CAS(8,10) in MRCI+Q/aug-cc-pV(5+d)Z calculation with additional diffuse functions, with a focus on the \(B\) and \(C\,^1Σ^+\) states. Cross sections for both direct photodissociation and predissociation from the vibronic ground state were calculated by applying the coupled-channel method. We found that the \(C-X\) \((0-0)\) transition has extremely strong absorption due to a large transition dipole moment in the Franck-Condon region and the upper state is resonant with several triplet states via spin-orbit couplings, resulting in predissociation to the main atomic products C \((^3P)\) and S \((^1D)\). Our new calculations show the photodissociation rate under the standard interstellar radiation field is \(2.9\ee{-9}\)\,s\(^{-1}\), with a 57\% contribution from \(C-X\) \((0-0)\) transition. This value is larger than that adopted by the Leiden photodissociation and photoionization database by a factor of 3.0. Our accurate \textit{ab initio} calculations will allow more secure determination of S-bearing molecules in astrochemical models. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: 23 pages, 14 figures

A characterisation of F_q-conics of PG(2,q^3)

Authors: S. G. Barwick, Wen-Ai Jackson, Peter Wild

Abstract: This article considers an F_q-conic contained in an F_q-subplane of PG(2,q^3), and shows that it corresponds to a normal rational curve in the Bruck-Bose representation in PG(6,q). This article then characterises which normal rational curves of PG(6,q) correspond via the Bruck-Bose representation to F_q-conics of PG(2,q^3). The normal rational curves of interest are called 3-special, which relates… ▽ More This article considers an F_q-conic contained in an F_q-subplane of PG(2,q^3), and shows that it corresponds to a normal rational curve in the Bruck-Bose representation in PG(6,q). This article then characterises which normal rational curves of PG(6,q) correspond via the Bruck-Bose representation to F_q-conics of PG(2,q^3). The normal rational curves of interest are called 3-special, which relates to how the extension of the normal rational curve meets the transversal lines of the regular 2-spread of the Bruck-Bose representation. This article uses geometric arguments that exploit the interaction between the Bruck-Bose representation of PG(2,q^3) in PG(6,q), and the Bose representation of PG(2,q^3) in PG(8,q). △ Less

Submitted 29 November, 2022; v1 submitted 4 July, 2019; originally announced July 2019.

MSC Class: 51E20

The Bose representation of PG(2,q^3) in PG(8,q)

Authors: S. G. Barwick, Wen-Ai Jackson, Peter Wild

Abstract: This article looks at the Bose representation of $PG(2,q^3)$ as a 2-spread of $PG(8,q)$. It is shown that an $\mathbb F_q$-subline of $PG(2,q^3)$ corresponds to a 2-regulus, and an $\mathbb F_q$-subplane corresponds to a Segre variety $S_{2;2}$. Moreover, the extension of these varieties to $PG(8,q^3)$ and $PG(8,q^6)$ is determined. These are used to determine the structure of an $\mathbb F_q$-con… ▽ More This article looks at the Bose representation of $PG(2,q^3)$ as a 2-spread of $PG(8,q)$. It is shown that an $\mathbb F_q$-subline of $PG(2,q^3)$ corresponds to a 2-regulus, and an $\mathbb F_q$-subplane corresponds to a Segre variety $S_{2;2}$. Moreover, the extension of these varieties to $PG(8,q^3)$ and $PG(8,q^6)$ is determined. These are used to determine the structure of an $\mathbb F_q$-conic of $PG(2,q^3)$ in the Bose representation in $PG(8,q)$. △ Less

Submitted 24 June, 2019; originally announced June 2019.

MSC Class: 51E20

Characterising hyperbolic hyperplanes of a non-singular quadric in $PG(4,q)$

Authors: S. G. Barwick, Alice M. W. Hui, Wen-Ai Jackson, Jeroen Schillewaert

Abstract: Let $H$ be a non-empty set of hyperplanes in $PG(4,q)$, $q$ even, such that every point of $PG(4,q)$ lies in either $0$, $\frac12q^3$ or $\frac12(q^3+q^2)$ hyperplanes of $ H$, and every plane of $PG(4,q)$ lies in $0$ or at least $\frac12q$ hyperplanes of $H$. Then $H$ is the set of all hyperplanes which meet a given non-singular quadric $Q(4,q)$ in a hyperbolic quadric. Let $H$ be a non-empty set of hyperplanes in $PG(4,q)$, $q$ even, such that every point of $PG(4,q)$ lies in either $0$, $\frac12q^3$ or $\frac12(q^3+q^2)$ hyperplanes of $ H$, and every plane of $PG(4,q)$ lies in $0$ or at least $\frac12q$ hyperplanes of $H$. Then $H$ is the set of all hyperplanes which meet a given non-singular quadric $Q(4,q)$ in a hyperbolic quadric. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Comments: arXiv admin note: text overlap with arXiv:1906.03985

A characterisation of Baer subplanes

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: Let $K$ be a set of $q^2+2q+1$ points in $PG(4,q)$. We show that if every 3-space meets $K$ in either one, two or three lines, a line and a non-degenerate conic, or a twisted cubic, then $K$ is a ruled cubic surface. Moreover, $K$ corresponds via the Bruck-Bose representation to a tangent Baer subplane of $PG(2,q^2)$. We use this to prove a characterisation in $PG(2,q^2)$ of a set of points $B$ as… ▽ More Let $K$ be a set of $q^2+2q+1$ points in $PG(4,q)$. We show that if every 3-space meets $K$ in either one, two or three lines, a line and a non-degenerate conic, or a twisted cubic, then $K$ is a ruled cubic surface. Moreover, $K$ corresponds via the Bruck-Bose representation to a tangent Baer subplane of $PG(2,q^2)$. We use this to prove a characterisation in $PG(2,q^2)$ of a set of points $B$ as a tangent Baer subplane by looking at the intersections of $B$ with Baer-pencils. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Characterising elliptic solids of $Q(4,q)$, $q$ even

Authors: S. G. Barwick, Alice M. W. Hui, Wen-Ai Jackson

Abstract: Let $E$ be a set of solids (hyperplanes) in $PG(4,q)$, $q$ even, $q>2$, such that every point of $PG(4,q)$ lies in either $0$, $\frac12q^3$ or $\frac12(q^3-q^2)$ solids of $E$, and every plane of $PG(4,q)$ lies in either $0$, $\frac12q$ or $q$ solids of $E$. This article shows that $E$ is either the set of solids that are disjoint from a hyperoval, or the set of solids that meet a non-singular qua… ▽ More Let $E$ be a set of solids (hyperplanes) in $PG(4,q)$, $q$ even, $q>2$, such that every point of $PG(4,q)$ lies in either $0$, $\frac12q^3$ or $\frac12(q^3-q^2)$ solids of $E$, and every plane of $PG(4,q)$ lies in either $0$, $\frac12q$ or $q$ solids of $E$. This article shows that $E$ is either the set of solids that are disjoint from a hyperoval, or the set of solids that meet a non-singular quadric $Q(4,q)$ in an elliptic quadric. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Conics in Baer subplanes

Authors: S. G. Barwick, Wen-Ai Jackson, Peter Wild

Abstract: This article studies conics and subconics of $PG(2,q^2)$ and their representation in the André/Bruck-Bose setting in $PG(4,q)$. In particular, we investigate their relationship with the transversal lines of the regular spread. The main result is to show that a conic in a tangent Baer subplane of $PG(2,q^2)$ corresponds in $PG(4,q)$ to a normal rational curve that meets the transversal lines of the… ▽ More This article studies conics and subconics of $PG(2,q^2)$ and their representation in the André/Bruck-Bose setting in $PG(4,q)$. In particular, we investigate their relationship with the transversal lines of the regular spread. The main result is to show that a conic in a tangent Baer subplane of $PG(2,q^2)$ corresponds in $PG(4,q)$ to a normal rational curve that meets the transversal lines of the regular spread. Conversely, every 3 and 4-dimensional normal rational curve in $PG(4,q)$ that meets the transversal lines of the regular spread corresponds to a conic in a tangent Baer subplane of $PG(2,q^2)$. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Specialness and the Bose representation

Authors: S. G. Barwick, Wen-Ai Jackson, Peter Wild

Abstract: This article looks at subconics of order $q$ of $PG(2,q^2)$ and characterizes them in the Bruck-Bose representation in $PG(4,q)$. In common with other objects in the Bruck-Bose representation, the characterisation uses the transversals of the regular line spread $S$ associated with the Bruck-Bose representation.By working in the Bose representation of $PG(2,q^2)$ in $PG(5,q)$, we give a geometric… ▽ More This article looks at subconics of order $q$ of $PG(2,q^2)$ and characterizes them in the Bruck-Bose representation in $PG(4,q)$. In common with other objects in the Bruck-Bose representation, the characterisation uses the transversals of the regular line spread $S$ associated with the Bruck-Bose representation.By working in the Bose representation of $PG(2,q^2)$ in $PG(5,q)$, we give a geometric explanation as to why the transversals of the regular spread $S$ are intrinsic to the characterisation of varieties of $PG(2,q^2)$. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Decomposition analysis to identify intervention targets for reducing disparities

Authors: John W. Jackson, Tyler J. VanderWeele

Abstract: There has been considerable interest in using decomposition methods in epidemiology (mediation analysis) and economics (Oaxaca-Blinder decomposition) to understand how health disparities arise and how they might change upon intervention. It has not been clear when estimates from the Oaxaca-Blinder decomposition can be interpreted causally because its implementation does not explicitly address pote… ▽ More There has been considerable interest in using decomposition methods in epidemiology (mediation analysis) and economics (Oaxaca-Blinder decomposition) to understand how health disparities arise and how they might change upon intervention. It has not been clear when estimates from the Oaxaca-Blinder decomposition can be interpreted causally because its implementation does not explicitly address potential confounding of target variables. While mediation analysis does explicitly adjust for confounders of target variables, it does so in a way that entails equalizing confounders across racial groups, which may not reflect the intended intervention. Revisiting prior analyses in the National Longitudinal Survey of Youth on disparities in wages, unemployment, incarceration, and overall health with test scores, taken as a proxy for educational attainment, as a target intervention, we propose and demonstrate a novel decomposition that controls for confounders of test scores (measures of childhood SES) while leaving their association with race intact. We compare this decomposition with others that use standardization (to equalize childhood SES alone), mediation analysis (to equalize test scores within levels of childhood SES), and one that equalizes both childhood SES and test scores. We also show how these decompositions, including our novel proposals, are equivalent to causal implementations of the Oaxaca-Blinder decomposition. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Comments: John Jackson is Assistant Professor in the Departments of Epidemiology and Mental Health at the Johns Hopkins Bloomberg School of Public Health and Tyler VanderWeele is Professor in the Departments of Epidemiology and Biostatistics at the Harvard T.H. Chan School of Public Health. Correspondence to [email protected]

New families of strongly regular graphs

Authors: S. G. Barwick, Wen-Ai Jackson, Tim Penttila

Abstract: In this article we construct a series of new infinite families of strongly regular graphs with the same parameters as the point-graphs of non-singular quadrics in PG(n,2). In this article we construct a series of new infinite families of strongly regular graphs with the same parameters as the point-graphs of non-singular quadrics in PG(n,2). △ Less

Submitted 16 June, 2016; originally announced June 2016.

MSC Class: 51E20; 05B25; 05C62

Nested Recurrence Relations With Conolly-Like Solutions

Authors: Alejandro Erickson, Abraham Isgur, Bradley W. Jackson, Frank Ruskey, Stephen M. Tanny

Abstract: A nondecreasing sequence of positive integers is $(α,β)$-Conolly, or Conolly-like for short, if for every positive integer $m$ the number of times that $m$ occurs in the sequence is $α+ βr_m$, where $r_m$ is $1$ plus the 2-adic valuation of $m$. A recurrence relation is $(α, β)$-Conolly if it has an $(α, β)$-Conolly solution sequence. We discover that Conolly-like sequences often appear as solutio… ▽ More A nondecreasing sequence of positive integers is $(α,β)$-Conolly, or Conolly-like for short, if for every positive integer $m$ the number of times that $m$ occurs in the sequence is $α+ βr_m$, where $r_m$ is $1$ plus the 2-adic valuation of $m$. A recurrence relation is $(α, β)$-Conolly if it has an $(α, β)$-Conolly solution sequence. We discover that Conolly-like sequences often appear as solutions to nested (or meta-Fibonacci) recurrence relations of the form $A(n) = \sum_{i=1}^k A(n-s_i-\sum_{j=1}^{p_i} A(n-a_{ij}))$ with appropriate initial conditions. For any fixed integers $k$ and $p_1,p_2,\ldots, p_k$ we prove that there are only finitely many pairs $(α, β)$ for which $A(n)$ can be $(α, β)$-Conolly. For the case where $α=0$ and $β=1$, we provide a bijective proof using labelled infinite trees to show that, in addition to the original Conolly recurrence, the recurrence $H(n)=H(n-H(n-2)) + H(n-3-H(n-5))$ also has the Conolly sequence as a solution. When $k=2$ and $p_1=p_2$, we construct an example of an $(α,β)$-Conolly recursion for every possible ($α,β)$ pair, thereby providing the first examples of nested recursions with $p_i>1$ whose solutions are completely understood. Finally, in the case where $k=2$ and $p_1=p_2$, we provide an if and only if condition for a given nested recurrence $A(n)$ to be $(α,0)$-Conolly by proving a very general ceiling function identity. △ Less

Submitted 8 September, 2015; originally announced September 2015.

MSC Class: 11B37

Journal ref: SIAM J. Discrete Mathematics, 26 2012, pp. 206-238 (33 pages)

The exterior splash in $PG(6,q)$: Special conics

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: Let $π$ be an order-$q$-subplane of $PG(2,q^3)$ that is exterior to $\ell_\infty$. The exterior splash of $π$ is the set of $q^2+q+1$ points on $\ell_\infty$ that lie on an extended line of $π$. Exterior splashes are projectively equivalent to scattered linear sets of rank 3, covers of the circle geometry $CG(3,q)$, and hyper-reguli of $PG(5,q)$. In this article we use the Bruck-Bose representatio… ▽ More Let $π$ be an order-$q$-subplane of $PG(2,q^3)$ that is exterior to $\ell_\infty$. The exterior splash of $π$ is the set of $q^2+q+1$ points on $\ell_\infty$ that lie on an extended line of $π$. Exterior splashes are projectively equivalent to scattered linear sets of rank 3, covers of the circle geometry $CG(3,q)$, and hyper-reguli of $PG(5,q)$. In this article we use the Bruck-Bose representation in $PG(6,q)$ to give a geometric characterisation of special conics of $π$ in terms of the covers of the exterior splash of $π$. We also investigate properties of order-$q$-subplanes\ with a common exterior splash, and study the intersection of two exterior splashes. △ Less

Submitted 15 October, 2014; originally announced October 2014.

MSC Class: 51E20

Hyper-reguli in PG(5,q)

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: A simple counting argument is used to show that for all $q$, an André hyper-regulus $\mathbb X$ in $PG(5,q)$ has exactly two switching sets. Moreover, there are exactly $2(q^2+q+1)$ planes in $PG(5,q)$ that meet every plane of $\mathbb X$ in a point, namely the planes in the switching sets. A simple counting argument is used to show that for all $q$, an André hyper-regulus $\mathbb X$ in $PG(5,q)$ has exactly two switching sets. Moreover, there are exactly $2(q^2+q+1)$ planes in $PG(5,q)$ that meet every plane of $\mathbb X$ in a point, namely the planes in the switching sets. △ Less

Submitted 23 September, 2014; originally announced September 2014.

MSC Class: 51E20

The exterior splash in PG(6,q): Transversals

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: Let $π$ be an order-$q$-subplane of $PG(2,q^3)$ that is exterior to $\ell_\infty$. Then the exterior splash of $π$ is the set of $q^2+q+1$ points on $\ell_\infty$ that lie on an extended line of $π$. Exterior splashes are projectively equivalent to scattered linear sets of rank 3, covers of the circle geometry $CG(3,q)$, and hyper-reguli in $PG(5,q)$. In this article we use the Bruck-Bose represen… ▽ More Let $π$ be an order-$q$-subplane of $PG(2,q^3)$ that is exterior to $\ell_\infty$. Then the exterior splash of $π$ is the set of $q^2+q+1$ points on $\ell_\infty$ that lie on an extended line of $π$. Exterior splashes are projectively equivalent to scattered linear sets of rank 3, covers of the circle geometry $CG(3,q)$, and hyper-reguli in $PG(5,q)$. In this article we use the Bruck-Bose representation in $PG(6,q)$ to investigate the structure of $π$, and the interaction between $π$ and its exterior splash. In $PG(6,q)$, an exterior splash $\mathbb S$ has two sets of cover planes (which are hyper-reguli) and we show that each set has three unique transversals lines in the cubic extension $PG(6,q^3)$. These transversal lines are used to characterise the carriers of $\mathbb S$, and to characterise the sublines of $\mathbb S$. △ Less

Submitted 23 September, 2014; originally announced September 2014.

MSC Class: 51E20

Exterior splashes and linear sets of rank 3

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: In $\PG(2,q^3)$, let $π$ be a subplane of order $q$ that is exterior to $\li$. The exterior splash of $π$ is defined to be the set of $q^2+q+1$ points on $\li$ that lie on a line of $π$. This article investigates properties of an exterior \orsp\ and its exterior splash. We show that the following objects are projectively equivalent: exterior splashes, covers of the circle geometry $CG(3,q)$, Sherk… ▽ More In $\PG(2,q^3)$, let $π$ be a subplane of order $q$ that is exterior to $\li$. The exterior splash of $π$ is defined to be the set of $q^2+q+1$ points on $\li$ that lie on a line of $π$. This article investigates properties of an exterior \orsp\ and its exterior splash. We show that the following objects are projectively equivalent: exterior splashes, covers of the circle geometry $CG(3,q)$, Sherk surfaces of size $q^2+q+1$, and $\GF(q)$-linear sets of rank 3 and size $q^2+q+1$. We compare our construction of exterior splashes with the projection construction of a linear set. We give a geometric construction of the two different families of sublines in an exterior splash, and compare them to the known families of sublines in a scattered linear set of rank 3. △ Less

Submitted 9 December, 2015; v1 submitted 6 April, 2014; originally announced April 2014.

MSC Class: 51E20

Characterising pointsets in PG(4,q) that correspond to conics

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: We consider a non-degenerate conic in $\PG(2,q^2)$, $q$ odd, that is tangent to $\ell_\infty$ and look at its structure in the Bruck-Bose representation in $\PG(4,q)$. We determine which combinatorial properties of this set of points in $\PG(4,q)$ are needed to reconstruct the conic in $\PG(2,q^2)$. That is, we define a set $\C$ in $\PG(4,q)$ with $q^2$ points that satisfies certain combinatorial… ▽ More We consider a non-degenerate conic in $\PG(2,q^2)$, $q$ odd, that is tangent to $\ell_\infty$ and look at its structure in the Bruck-Bose representation in $\PG(4,q)$. We determine which combinatorial properties of this set of points in $\PG(4,q)$ are needed to reconstruct the conic in $\PG(2,q^2)$. That is, we define a set $\C$ in $\PG(4,q)$ with $q^2$ points that satisfies certain combinatorial properties. We then show that if $q\ge 7$, we can use $\C$ to construct a regular spread $§$ in the hyperplane at infinity of $\PG(4,q)$, and that $\C$ corresponds to a conic in the Desarguesian plane $¶(§)\cong\PG(2,q^2)$ constructed via the Bruck-Bose correspondence. △ Less

Submitted 21 August, 2013; originally announced August 2013.

MSC Class: 51E20

The tangent splash in $\PG(6,q)$

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: Let B be a subplane of PG(2,q^3) of order q that is tangent to $\ell_\infty$. Then the tangent splash of B is defined to be the set of q^2+1 points of $\ell_\infty$ that lie on a line of B. In the Bruck-Bose representation of PG(2,q^3) in PG(6,q), we investigate the interaction between the ruled surface corresponding to B and the planes corresponding to the tangent splash of B. We then give a geom… ▽ More Let B be a subplane of PG(2,q^3) of order q that is tangent to $\ell_\infty$. Then the tangent splash of B is defined to be the set of q^2+1 points of $\ell_\infty$ that lie on a line of B. In the Bruck-Bose representation of PG(2,q^3) in PG(6,q), we investigate the interaction between the ruled surface corresponding to B and the planes corresponding to the tangent splash of B. We then give a geometric construction of the unique order-$q$-subplane determined by a given tangent splash and a fixed order-$q$-subline. △ Less

Submitted 28 May, 2013; originally announced May 2013.

Comments: arXiv admin note: substantial text overlap with arXiv:1303.5509

MSC Class: 51E20

A characterisation of translation ovals in finite even order planes

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: In this article we consider a set C of points in PG(4,q), q even, satisfying certain combinatorial properties with respect to the planes of PG(4,q). We show that there is a regular spread in the hyperplane at infinity, such that in the corresponding Bruck-Bose plane PG(2,q^2), the points corresponding to C form a translation hyperoval, and conversely. In this article we consider a set C of points in PG(4,q), q even, satisfying certain combinatorial properties with respect to the planes of PG(4,q). We show that there is a regular spread in the hyperplane at infinity, such that in the corresponding Bruck-Bose plane PG(2,q^2), the points corresponding to C form a translation hyperoval, and conversely. △ Less

Submitted 28 May, 2013; originally announced May 2013.

MSC Class: 51E20

An investigation of the tangent splash of a subplane of PG(2,q^3)

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: In $PG(2,q^3)$, let $π$ be a subplane of order $q$ that is tangent to $\ell_infty$. The tangent splash of $π$ is defined to be the set of $q^2+1$ points on $\ell_infty$ that lie on a line of $π$. This article investigates properties of the tangent splash. We show that all tangent splashes are projectively equivalent, investigate sublines contained in a tangent splash, and consider the structure of… ▽ More In $PG(2,q^3)$, let $π$ be a subplane of order $q$ that is tangent to $\ell_infty$. The tangent splash of $π$ is defined to be the set of $q^2+1$ points on $\ell_infty$ that lie on a line of $π$. This article investigates properties of the tangent splash. We show that all tangent splashes are projectively equivalent, investigate sublines contained in a tangent splash, and consider the structure of a tangent splash in the Bruck-Bose representation of $PG(2,q^3)$ in $PG(6,q)$. We show that a tangent splash of $PG(1,q^3)$ is a $GF(q)$-linear set of rank 3 and size $q^2+1$; this allows us to use results about linear sets from \cite{lavr10} to obtain properties of tangent splashes. △ Less

Submitted 6 April, 2014; v1 submitted 21 March, 2013; originally announced March 2013.

MSC Class: 51E20

A Characterisation of Tangent Subplanes of PG(2,q^3)

Authors: S. G. Barwick, Wen-Ai Jackson

Abstract: In: S.G. Barwick and W.A. Jackson. Sublines and subplanes of PG(2,q^3) in the Bruck--Bose representation in PG(6,q). Finite Fields Th. App. 18 (2012) 93--107., the authors determine the representation of order-q-subplanes and order-q-sublines of PG(2,q^3) in the Bruck-Bose representation in PG(6,q). In particular, they showed that an order-q-subplane of PG(2,q^3) corresponds to a certain ruled sur… ▽ More In: S.G. Barwick and W.A. Jackson. Sublines and subplanes of PG(2,q^3) in the Bruck--Bose representation in PG(6,q). Finite Fields Th. App. 18 (2012) 93--107., the authors determine the representation of order-q-subplanes and order-q-sublines of PG(2,q^3) in the Bruck-Bose representation in PG(6,q). In particular, they showed that an order-q-subplane of PG(2,q^3) corresponds to a certain ruled surface in PG(6,q). In this article we show that the converse holds, namely that any ruled surface satisfying the required properties corresponds to a tangent order-q-subplane of PG(2,q^3). △ Less

Submitted 22 April, 2012; originally announced April 2012.

High-energy high-luminosity electron-ion collider eRHIC

Authors: Vladimir N. Litvinenko, Joanne Beebe-Wang, Sergei Belomestnykh, Ilan Ben-Zvi, Michael M. Blaskiewicz, Rama Calaga, Xiangyun Chang, Alexei Fedotov, David Gassner, Lee Hammons, Harald Hahn, Yue Hao, ** He, William Jackson, Animesh Jain, Elliott C. Johnson, Dmitry Kayran, Jrg Kewisch, Yun Luo, George Mahler, Gary McIntyre, Wuzheng Meng, Michiko Minty, Brett Parker, Alexander Pikin , et al. (17 additional authors not shown)

Abstract: In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity. In this paper, we describe a future electron-ion collider (EIC), based on the existing Relativistic Heavy Ion Collider (RHIC) hadron facility, with two intersecting superconducting rings, each 3.8 km in circumference. A new ERL accelerator, which provide 5-30 GeV electron beam, will ensure 10^33 to 10^34 cm^-2 s^-1 level luminosity. △ Less

Submitted 13 September, 2011; originally announced September 2011.

Gluons and the quark sea at high energies: distributions, polarization, tomography

Authors: D. Boer, M. Diehl, R. Milner, R. Venugopalan, W. Vogelsang, A. Accardi, E. Aschenauer, M. Burkardt, R. Ent, V. Guzey, D. Hasch, K. Kumar, M. A. C. Lamont, Y. Li, W. J. Marciano, C. Marquet, F. Sabatie, M. Stratmann, F. Yuan, S. Abeyratne, S. Ahmed, C. Aidala, S. Alekhin, M. Anselmino, H. Avakian , et al. (164 additional authors not shown)

Abstract: This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei… ▽ More This report is based on a ten-week program on "Gluons and the quark sea at high-energies", which took place at the Institute for Nuclear Theory in Seattle in Fall 2010. The principal aim of the program was to develop and sharpen the science case for an Electron-Ion Collider (EIC), a facility that will be able to collide electrons and positrons with polarized protons and with light to heavy nuclei at high energies, offering unprecedented possibilities for in-depth studies of quantum chromodynamics. This report is organized around four major themes: i) the spin and flavor structure of the proton, ii) three-dimensional structure of nucleons and nuclei in momentum and configuration space, iii) QCD matter in nuclei, and iv) Electroweak physics and the search for physics beyond the Standard Model. Beginning with an executive summary, the report contains tables of key measurements, chapter overviews for each of the major scientific themes, and detailed individual contributions on various aspects of the scientific opportunities presented by an EIC. △ Less

Submitted 28 November, 2011; v1 submitted 5 August, 2011; originally announced August 2011.

Comments: 547 pages, A report on the joint BNL/INT/Jlab program on the science case for an Electron-Ion Collider, September 13 to November 19, 2010, Institute for Nuclear Theory, Seattle; v2 with minor changes, matches printed version

Report number: INT-PUB-11-034, BNL-96164-2011, JLAB-THY-11-1373

The temporal changes in the emission spectrum of Comet 9P/Tempel 1 after Deep Impact

Authors: William M. Jackson, XueLiang Yang, Xiaoyu Shi, Anita L. Cochran

Abstract: The time dependence of the changes in the emission spectra of Comet 9P/Tempel 1 after Deep Impact are derived and discussed. This was a unique event because for the first time it gave astronomers the opportunity to follow the time history of the formation and decay of O(1S), OH, CN, C2, C3, NH, and NH2. Least squares fits of a modified Haser model with constraints using known rate constants were… ▽ More The time dependence of the changes in the emission spectra of Comet 9P/Tempel 1 after Deep Impact are derived and discussed. This was a unique event because for the first time it gave astronomers the opportunity to follow the time history of the formation and decay of O(1S), OH, CN, C2, C3, NH, and NH2. Least squares fits of a modified Haser model with constraints using known rate constants were fit to the observed data. In the case of OH a simple two-step Haser model provides a reasonable fit to the observations. Fitting the emissions from O(1S), CN, C2, C3, NH, and NH2 requires the addition of a delayed component to a regular two or three step Haser model. From this information a picture of the Deep Impact encounter emerges where there is an initial formation of gas and dust, which is responsible for the prompt emission that occurs right after impact. A secondary source of gas starts later after impact when the initial dust has dissipated enough so that solar radiation can reach the surface of freshly exposed material. The implications of this and other results are discussed in terms of the implications on the structure and composition of the comet's nucleus. △ Less

Submitted 3 April, 2009; originally announced April 2009.

Comments: Accepted for publication in The Astrophysical Journal; 26 pages including 8 figures and 1 table

Journal ref: Astrophys.J.698:1609-1619,2009

Observations of Comet 9P/Tempel 1 with the Keck 1 HIRES Instrument During Deep Impact

Authors: Anita L. Cochran, William M. Jackson, Karen J. Meech, Micah Glaz

Abstract: We report high-spectral resolution observations of comet 9P/Tempel 1 before, during and after the impact on 4 July 2005 UT of the Deep Impact spacecraft with the comet. These observations were obtained with the HIRES instrument on Keck 1. We observed brightening of both the dust and gas, but at different rates. We report the behavior of OH, NH, CN, C$_{3}$, CH, NH$_{2}$ and C$_{2}$ gas. From our… ▽ More We report high-spectral resolution observations of comet 9P/Tempel 1 before, during and after the impact on 4 July 2005 UT of the Deep Impact spacecraft with the comet. These observations were obtained with the HIRES instrument on Keck 1. We observed brightening of both the dust and gas, but at different rates. We report the behavior of OH, NH, CN, C$_{3}$, CH, NH$_{2}$ and C$_{2}$ gas. From our observations, we determined a CN outflow velocity of at least 0.51 km sec$^{-1}$. The dust color did not change substantially. To date, we see no new species in our spectra, nor do we see any evidence of prompt emission. From our observations, the interior material released by the impact looks the same as the material released from the surface by ambient cometary activity. However, further processing of the data may uncover subtle differences in the material that is released as well as the time evolution of this material. △ Less

Submitted 5 September, 2006; originally announced September 2006.

Comments: 22 pages, 5 figures (1 color, landscape). Accepted for publication in Icarus

The impact and rotational lightcurves of Comet 9P/Tempel 1

Authors: Jean Manfroid, Damien Hutsemékers, Emmanuël Jehin, Anita L. Cochran, Claude Arpigny, William M. Jackson, Karen J. Meech, Rita Schulz, Jean-Marc Zucconi

Abstract: UVES and HIRES high-resolution spectra of comet 9P/Tempel 1 are used to investigate the impact and rotational light curves of various species with a view toward building a simple model of the distribution and activity of the sources. The emission by OH, NH, CN, C3, CH, C2, NH2 and OI, are analyzed, as well as the light scattered by the dust. It is found that a simple model reproduces fairly well… ▽ More UVES and HIRES high-resolution spectra of comet 9P/Tempel 1 are used to investigate the impact and rotational light curves of various species with a view toward building a simple model of the distribution and activity of the sources. The emission by OH, NH, CN, C3, CH, C2, NH2 and OI, are analyzed, as well as the light scattered by the dust. It is found that a simple model reproduces fairly well the impact lightcurves of all species combining the production of the observed molecules and the expansion of the material throughout the slit. The rotational light curve for each species is explained in terms of a single model with three sources. △ Less

Submitted 29 August, 2006; originally announced August 2006.

Comments: 34 pages, 11 figures Accepted for publication in the special issue of Icarus associated with the Deep Impact mission to Comet 9P/Tempel 1

Antisite effect on ferromagnetism in (Ga,Mn)As

Authors: R. C. Myers, B. L. Sheu, A. W. Jackson, A. C. Gossard, P. Schiffer, N. Samarth, D. D. Awschalom

Abstract: We study the Curie temperature and hole density of (Ga,Mn)As while systematically varying the As-antisite density. Hole compensation by As-antisites limits the Curie temperature and can completely quench long-range ferromagnetic order in the low do** regime of 1-2% Mn. Samples are grown by molecular beam epitaxy without substrate rotation in order to smoothly vary the As to Ga flux ratio acros… ▽ More We study the Curie temperature and hole density of (Ga,Mn)As while systematically varying the As-antisite density. Hole compensation by As-antisites limits the Curie temperature and can completely quench long-range ferromagnetic order in the low do** regime of 1-2% Mn. Samples are grown by molecular beam epitaxy without substrate rotation in order to smoothly vary the As to Ga flux ratio across a single wafer. This technique allows for a systematic study of the effect of As stoichiometry on the structural, electronic, and magnetic properties of (Ga,Mn)As. For concentrations less than 1.5% Mn, a strong deviation from Tc ~ p^0.33 is observed. Our results emphasize that proper control of As-antisite compensation is critical for controlling the Curie temperatures in (Ga,Mn)As at the low do** limit. △ Less

Submitted 19 June, 2006; originally announced June 2006.

Comments: 10 pages, 7 figures

Journal ref: Phys. Rev. B 74, 155203 (2006)

Liquid 4He: contributions to first principles theory of quantized vortices, thermohydrodynamic properties, and the lambda transition

Authors: H. W. Jackson

Abstract: Liquid 4He has been studied extensively for almost a century, but there are still a number of outstanding weak or missing links in our comprehension of it. This paper reviews some of the principal paths taken in previous research and then proceeds to fill gaps and create an integrated picture with more complete understanding through first principles treatment of a realistic model that starts wit… ▽ More Liquid 4He has been studied extensively for almost a century, but there are still a number of outstanding weak or missing links in our comprehension of it. This paper reviews some of the principal paths taken in previous research and then proceeds to fill gaps and create an integrated picture with more complete understanding through first principles treatment of a realistic model that starts with a microscopic, atomistic description of the liquid. Newly derived results for vortex cores and thermohydrodynamic properties for a two-fluid model are used to show that interacting quantized vortices may produce a lambda anomaly in specific heat near the superfluid transition where flow properties change. The nature of the order in the superfluid state is explained. Experimental support for new calculations is exhibited, and a unique specific heat experiment is proposed to test predictions of the theory. Relevance of the theory to modern research in cosmology, astrophysics, and Bose-Einstein condensates is discussed. △ Less

Submitted 3 March, 2006; originally announced March 2006.

Comments: 155 pages, 28 figures

Deep Impact : High Resolution Optical Spectroscopy with the ESO VLT and the Keck 1 telescope

Authors: E. Jehin, J. Manfroid, D. Hutsemekers, A. L. Cochran, C. Arpigny, W. M. Jackson, H. Rauer, R. Schulz, J. -M. Zucconi

Abstract: We report on observations of comet 9P/Tempel 1 carried out before, during, and after the NASA DEEP IMPACT event (UT July 4), with the optical spectrometers UVES and HIRES mounted on the telescopes Kueyen of the ESO VLT (Chile) and Keck 1 on Mauna Kea (Hawaii), respectively. A total observing time of about 60 hours, distributed over 15 nights around the impact date, allowed us (i) to find a perio… ▽ More We report on observations of comet 9P/Tempel 1 carried out before, during, and after the NASA DEEP IMPACT event (UT July 4), with the optical spectrometers UVES and HIRES mounted on the telescopes Kueyen of the ESO VLT (Chile) and Keck 1 on Mauna Kea (Hawaii), respectively. A total observing time of about 60 hours, distributed over 15 nights around the impact date, allowed us (i) to find a periodic variation of 1.709 +/- 0.009 day in the CN and NH flux, explained by the presence of two major active regions; (ii) to derive a lifetime > ~ 5 x 10^4 s for the parent of the CN radical from a simple modeling of the CN light curve after the impact; (iii) to follow the gas and dust spatial profiles evolution during the 4 hours following the impact and derive the projected velocities (400 m/s and 150 m/s respectively); (iv) to show that the material released by the impact has the same carbon and nitrogen isotopic composition as the surface material (12C/13C = 95 +/- 15 and 14N/15N = 145 +/- 20). △ Less

Submitted 13 March, 2006; originally announced March 2006.

Comments: Accepted for publication in ApJ Letters

Journal ref: Astrophys.J. 641 (2006) L145-L148