-
Global temperature goals should determine the time horizons for greenhouse gas emission metrics
Authors:
Sam Abernethy,
Robert B. Jackson
Abstract:
Emission metrics, a crucial tool in setting effective equivalences between greenhouse gases, currently require a subjective, arbitrary choice of time horizon. Here, we propose a novel framework that uses a specific temperature goal to calculate the time horizon that aligns with scenarios achieving that temperature goal. We analyze the Intergovernmental Panel on Climate Change Special Report on Glo…
▽ More
Emission metrics, a crucial tool in setting effective equivalences between greenhouse gases, currently require a subjective, arbitrary choice of time horizon. Here, we propose a novel framework that uses a specific temperature goal to calculate the time horizon that aligns with scenarios achieving that temperature goal. We analyze the Intergovernmental Panel on Climate Change Special Report on Global Warming of 1.5 C Scenario Database to find that time horizons that align with the 1.5 and 2 C global warming goals of the Paris Agreement are 24 [90% prediction interval: 7, 41] and 58 [90% PI: 41, 74] years respectively. We then use these time horizons to quantify time-dependent emission metrics with methane as our main example. We find that the Global Warming Potential values that align with the 1.5 and 2 C goals are GWP1.5 C = 75 [90% PI: 54, 107] and GWP2 C = 42 [90% PI: 35, 54]; for the Global Temperature change Potential they are GTP1.5 C = 41 [90% PI: 16, 102] and GTP2 C = 9 [90% PI: 7, 16]. The most commonly used time horizon, 100 years, underestimates methane emission metrics by 34-38% relative to the values we calculate that align with the 2 C goal and 63-87% relative to the 1.5 C goal. To best align emission metrics with the 1.5 C goal of the Paris Agreement, we recommend a 24-year time horizon, using 2045 as the endpoint time, with its associated GWP1.5 C = 75 and GTP1.5 C = 41.
△ Less
Submitted 16 November, 2021; v1 submitted 12 April, 2021;
originally announced April 2021.
-
Robust Quantum Optimal Control with Trajectory Optimization
Authors:
Thomas Propson,
Brian E. Jackson,
Jens Koch,
Zachary Manchester,
David I. Schuster
Abstract:
The ability to engineer high-fidelity gates on quantum processors in the presence of systematic errors remains the primary barrier to achieving quantum advantage. Quantum optimal control methods have proven effective in experimentally realizing high-fidelity gates, but they require exquisite calibration to be performant. We apply robust trajectory optimization techniques to suppress gate errors ar…
▽ More
The ability to engineer high-fidelity gates on quantum processors in the presence of systematic errors remains the primary barrier to achieving quantum advantage. Quantum optimal control methods have proven effective in experimentally realizing high-fidelity gates, but they require exquisite calibration to be performant. We apply robust trajectory optimization techniques to suppress gate errors arising from system parameter uncertainty. We propose a derivative-based approach that maintains computational efficiency by using forward-mode differentiation. Additionally, the effect of depolarization on a gate is typically modeled by integrating the Lindblad master equation, which is computationally expensive. We employ a computationally efficient model and utilize time-optimal control to achieve high-fidelity gates in the presence of depolarization. We apply these techniques to a fluxonium qubit and suppress simulated gate errors due to parameter uncertainty below $10^{-7}$ for static parameter deviations on the order of $1\%$.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Discovering features in gravitational-wave data through detector characterization, citizen science and machine learning
Authors:
S Soni,
C P L Berry,
S B Coughlin,
M Harandi,
C B Jackson,
K Crowston,
C Østerlund,
O Patane,
A K Katsaggelos,
L Trouille,
V-G Baranowski,
W F Domainko,
K Kaminski,
M A Lobato Rodriguez,
U Marciniak,
P Nauta,
G Niklasch,
R R Rote,
B Téglás,
C Unsworth,
C Zhang
Abstract:
The observation of gravitational waves is hindered by the presence of transient noise (glitches). We study data from the third observing run of the Advanced LIGO detectors, and identify new glitch classes. Using training sets assembled by monitoring of the state of the detector, and by citizen-science volunteers, we update the Gravity Spy machine-learning algorithm for glitch classification. We fi…
▽ More
The observation of gravitational waves is hindered by the presence of transient noise (glitches). We study data from the third observing run of the Advanced LIGO detectors, and identify new glitch classes. Using training sets assembled by monitoring of the state of the detector, and by citizen-science volunteers, we update the Gravity Spy machine-learning algorithm for glitch classification. We find that a new glitch class linked to ground motion at the detector sites is especially prevalent, and identify two subclasses of this linked to different types of ground motion. Reclassification of data based on the updated model finds that 27 % of all transient noise at LIGO Livingston belongs to the new glitch class, making it the most frequent source of transient noise at that site. Our results demonstrate both how glitch classification can reveal potential improvements to gravitational-wave detectors, and how, given an appropriate framework, citizen-science volunteers may make discoveries in large data sets.
△ Less
Submitted 6 September, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Global Daily CO$_2$ emissions for the year 2020
Authors:
Zhu Liu,
Zhu Deng,
Philippe Ciais,
Jianguang Tan,
Biqing Zhu,
Steven J. Davis,
Robbie Andrew,
Olivier Boucher,
Simon Ben Arous,
Pep Canadel,
Xinyu Dou,
Pierre Friedlingstein,
Pierre Gentine,
Rui Guo,
Chaopeng Hong,
Robert B. Jackson,
Daniel M. Kammen,
Piyu Ke,
Corinne Le Quere,
Crippa Monica,
Greet Janssens-Maenhout,
Glen Peters,
Katsumasa Tanaka,
Yilong Wang,
Bo Zheng
, et al. (3 additional authors not shown)
Abstract:
The diurnal cycle CO$_2$ emissions from fossil fuel combustion and cement production reflect seasonality, weather conditions, working days, and more recently the impact of the COVID-19 pandemic. Here, for the first time we provide a daily CO$_2$ emission dataset for the whole year of 2020 calculated from inventory and near-real-time activity data (called Carbon Monitor project: https://carbonmonit…
▽ More
The diurnal cycle CO$_2$ emissions from fossil fuel combustion and cement production reflect seasonality, weather conditions, working days, and more recently the impact of the COVID-19 pandemic. Here, for the first time we provide a daily CO$_2$ emission dataset for the whole year of 2020 calculated from inventory and near-real-time activity data (called Carbon Monitor project: https://carbonmonitor.org). It was previously suggested from preliminary estimates that did not cover the entire year of 2020 that the pandemics may have caused more than 8% annual decline of global CO$_2$ emissions. Here we show from detailed estimates of the full year data that the global reduction was only 5.4% (-1,901 MtCO$_2$, ). This decrease is 5 times larger than the annual emission drop at the peak of the 2008 Global Financial Crisis. However, global CO$_2$ emissions gradually recovered towards 2019 levels from late April with global partial re-opening. More importantly, global CO$_2$ emissions even increased slightly by +0.9% in December 2020 compared with 2019, indicating the trends of rebound of global emissions. Later waves of COVID-19 infections in late 2020 and corresponding lockdowns have caused further CO$_2$ emissions reductions particularly in western countries, but to a much smaller extent than the declines in the first wave. That even substantial world-wide lockdowns of activity led to a one-time decline in global CO$_2$ emissions of only 5.4% in one year highlights the significant challenges for climate change mitigation that we face in the post-COVID era. These declines are significant, but will be quickly overtaken with new emissions unless the COVID-19 crisis is utilized as a break-point with our fossil-fuel trajectory, notably through policies that make the COVID-19 recovery an opportunity to green national energy and development plans.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Maximal Matroids in Weak Order Posets
Authors:
Bill Jackson,
Shin-ichi Tanigawa
Abstract:
Let $\cX$ be a family of subsets of a finite set $E$. A matroid on $E$ is called an $\cX$-matroid if each set in $\cX$ is a circuit. We consider the problem of determining when there exists a unique maximal $\cX$-matroid in the weak order poset of all $\cX$-matroids on $E$, and characterizing its rank function when it exists.
Let $\cX$ be a family of subsets of a finite set $E$. A matroid on $E$ is called an $\cX$-matroid if each set in $\cX$ is a circuit. We consider the problem of determining when there exists a unique maximal $\cX$-matroid in the weak order poset of all $\cX$-matroids on $E$, and characterizing its rank function when it exists.
△ Less
Submitted 13 March, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Frequency Shift Algorithm: Application to a Frequency-Domain Multiplexing Readout of X-ray Transition-Edge Sensor Microcalorimeters
Authors:
D. Vaccaro,
H. Akamatsu,
J. van der Kuur,
P. van der Hulst,
A. C. T. Nieuwenhuizen,
P. van Winden,
L. Gottardi,
R. den Hartog,
M. P. Bruijn,
M. D'Andrea,
J. R. Gao,
J. W. A. den Herder,
R. W. M. Hoogeveen,
B. Jackson,
A. J. van der Linden,
K. Nagayoshi,
K. Ravensberg,
M. L. Ridder,
E. Taralli,
M. de Wit
Abstract:
In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes howev…
▽ More
In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes however pose a limit on the accuracy of the effective filter resonance frequencies. Off-resonance bias carriers could be used to suppress the impact of intermodulation distortions, which nonetheless would significantly affect the effective bias circuit and the detector spectral performance. In this paper we present a frequency shift algorithm (FSA) to allow off-resonance readout of TES's while preserving the on-resonance bias circuit and spectral performance, demonstrating its application to the FDM readout of a X-ray TES microcalorimeter array. We discuss the benefits in terms of mitigation of the impact of intermodulation distortions at the cost of increased bias voltage and the scalability of the algorithm to multi-pixel FDM readout. We show that with FSA, in multi-pixel and frequencies shifted on-grid, the line noises due to intermodulation distortion are placed away from the sensitive region in the TES response and the X-ray performance is consistent with the single-pixel, on-resonance level.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Ultra Short Period Planets in K2 III: Neighbors are Common with 13 New Multi-Planet Systems and 10 Newly Validated Planets in Campaigns 0-8, 10
Authors:
Elisabeth R. Adams,
Brian Jackson,
Samantha Johnson,
David R. Ciardi,
William D. Cochran,
Michael Endl,
Mark E. Everett,
Elise Furlan,
Steve B. Howell,
Prasanna Jayanthi,
Phillip J. MacQueen,
Rachel A. Matson,
Ciera Partyka-Worley,
Joshua Schlieder,
Nicholas J. Scott,
Sevio M. Stanton,
Carl Ziegler
Abstract:
Using the EVEREST photometry pipeline, we have identified 74 candidate ultra-short-period planets (orbital period P<1 d) in the first half of the K2 data (Campaigns 0-8 and 10). Of these, 33 candidates have not previously been reported. A systematic search for additional transiting planets found 13 new multi-planet systems, doubling the number known and representing a third (32%) of USPs. We also…
▽ More
Using the EVEREST photometry pipeline, we have identified 74 candidate ultra-short-period planets (orbital period P<1 d) in the first half of the K2 data (Campaigns 0-8 and 10). Of these, 33 candidates have not previously been reported. A systematic search for additional transiting planets found 13 new multi-planet systems, doubling the number known and representing a third (32%) of USPs. We also identified 30 companions, which have periods from 1.4 to 31 days (median 5.5 d). A third (36 of 104) of the candidate USPs and companions have been statistically validated or confirmed, 10 for the first time, including 7 USPs. Almost all candidates, and all validated planets, are small (radii Rp<=3 R_E) with a median radius of R_p=1.1 R_E; the validated and confirmed candidates have radii between 0.4 R_E and 2.4 R_E and periods from P=0.18 to 0.96 d. The lack of candidate (a) ultra-hot-Jupiters (R_p>10 R_E) and (b) short-period desert (3<=Rp<=10 R_E) planets suggests that both populations are rare, although our survey may have missed some of the very deepest transits. These results also provide strong evidence that we have not reached a lower limit on the distribution of planetary radius values for planets at close proximity to a star, and suggest that additional improvements in photometry techniques would yield yet more ultra-short-period planets. The large fraction of USPs in known multi-planet systems supports origins models that involve dynamical interactions with exterior planets coupled to tidal decay of the USP orbits.
△ Less
Submitted 19 May, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
OGNet: Towards a Global Oil and Gas Infrastructure Database using Deep Learning on Remotely Sensed Imagery
Authors:
Hao Sheng,
Jeremy Irvin,
Sasankh Munukutla,
Shawn Zhang,
Christopher Cross,
Kyle Story,
Rose Rustowicz,
Cooper Elsworth,
Zutao Yang,
Mark Omara,
Ritesh Gautam,
Robert B. Jackson,
Andrew Y. Ng
Abstract:
At least a quarter of the warming that the Earth is experiencing today is due to anthropogenic methane emissions. There are multiple satellites in orbit and planned for launch in the next few years which can detect and quantify these emissions; however, to attribute methane emissions to their sources on the ground, a comprehensive database of the locations and characteristics of emission sources w…
▽ More
At least a quarter of the warming that the Earth is experiencing today is due to anthropogenic methane emissions. There are multiple satellites in orbit and planned for launch in the next few years which can detect and quantify these emissions; however, to attribute methane emissions to their sources on the ground, a comprehensive database of the locations and characteristics of emission sources worldwide is essential. In this work, we develop deep learning algorithms that leverage freely available high-resolution aerial imagery to automatically detect oil and gas infrastructure, one of the largest contributors to global methane emissions. We use the best algorithm, which we call OGNet, together with expert review to identify the locations of oil refineries and petroleum terminals in the U.S. We show that OGNet detects many facilities which are not present in four standard public datasets of oil and gas infrastructure. All detected facilities are associated with characteristics known to contribute to methane emissions, including the infrastructure type and the number of storage tanks. The data curated and produced in this study is freely available at http://stanfordmlgroup.github.io/projects/ognet .
△ Less
Submitted 14 November, 2020;
originally announced November 2020.
-
Error Autocorrelation Objective Function for Improved System Modeling
Authors:
Anand Ramakrishnan,
Warren B. Jackson,
Kent Evans
Abstract:
Deep learning models are trained to minimize the error between the model's output and the actual values. The typical cost function, the Mean Squared Error (MSE), arises from maximizing the log-likelihood of additive independent, identically distributed Gaussian noise. However, minimizing MSE fails to minimize the residuals' cross-correlations, leading to over-fitting and poor extrapolation of the…
▽ More
Deep learning models are trained to minimize the error between the model's output and the actual values. The typical cost function, the Mean Squared Error (MSE), arises from maximizing the log-likelihood of additive independent, identically distributed Gaussian noise. However, minimizing MSE fails to minimize the residuals' cross-correlations, leading to over-fitting and poor extrapolation of the model outside the training set (generalization). In this paper, we introduce a "whitening" cost function, the Ljung-Box statistic, which not only minimizes the error but also minimizes the correlations between errors, ensuring that the fits enforce compatibility with an independent and identically distributed (i.i.d) gaussian noise model. The results show significant improvement in generalization for recurrent neural networks (RNNs) (1d) and image autoencoders (2d). Specifically, we look at both temporal correlations for system-id in simulated and actual mechanical systems. We also look at spatial correlation in vision autoencoders to demonstrate that the whitening objective functions lead to much better extrapolation--a property very desirable for reliable control systems.
△ Less
Submitted 11 May, 2021; v1 submitted 8 August, 2020;
originally announced August 2020.
-
Enabling Morally Sensitive Robotic Clarification Requests
Authors:
Ryan Blake Jackson,
Tom Williams
Abstract:
The design of current natural language oriented robot architectures enables certain architectural components to circumvent moral reasoning capabilities. One example of this is reflexive generation of clarification requests as soon as referential ambiguity is detected in a human utterance. As shown in previous research, this can lead robots to (1) miscommunicate their moral dispositions and (2) wea…
▽ More
The design of current natural language oriented robot architectures enables certain architectural components to circumvent moral reasoning capabilities. One example of this is reflexive generation of clarification requests as soon as referential ambiguity is detected in a human utterance. As shown in previous research, this can lead robots to (1) miscommunicate their moral dispositions and (2) weaken human perception or application of moral norms within their current context. We present a solution to these problems by performing moral reasoning on each potential disambiguation of an ambiguous human utterance and responding accordingly, rather than immediately and naively requesting clarification. We implement our solution in the DIARC robot architecture, which, to our knowledge, is the only current robot architecture with both moral reasoning and clarification request generation capabilities. We then evaluate our method with a human subjects experiment, the results of which indicate that our approach successfully ameliorates the two identified concerns.
△ Less
Submitted 16 July, 2020;
originally announced July 2020.
-
An improved bound for the rigidity of linearly constrained frameworks
Authors:
Bill Jackson,
Anthony Nixon,
Shin-Ichi Tanigawa
Abstract:
We consider the problem of characterising the generic rigidity of bar-joint frameworks in $\mathbb{R}^d$ in which each vertex is constrained to lie in a given affine subspace. The special case when $d=2$ was previously solved by I. Streinu and L. Theran in 2010 and the case when each vertex is constrained to lie in an affine subspace of dimension $t$, and $d\geq t(t-1)$ was solved by Cruickshank,…
▽ More
We consider the problem of characterising the generic rigidity of bar-joint frameworks in $\mathbb{R}^d$ in which each vertex is constrained to lie in a given affine subspace. The special case when $d=2$ was previously solved by I. Streinu and L. Theran in 2010 and the case when each vertex is constrained to lie in an affine subspace of dimension $t$, and $d\geq t(t-1)$ was solved by Cruickshank, Guler and the first two authors in 2019. We extend the latter result by showing that the given characterisation holds whenever $d\geq 2t$.
△ Less
Submitted 2 July, 2020; v1 submitted 22 May, 2020;
originally announced May 2020.
-
Progress in the development of frequency domain multiplexing for the X-ray Integral Field Unit on board the Athena mission
Authors:
H. Akamatsu,
L. Gottardi,
J. van der Kuur,
C. P. de Vries,
M. P. Bruijn,
J. A. Chervenak,
M. Kiviranta,
A. J. van den Linden,
B. D. Jackson,
A. Miniussi,
K. Ravensberg,
K. Sakai,
S. J. Smith,
N. Wakeham
Abstract:
Frequency domain multiplexing (FDM) is the baseline readout system for the X-ray Integral Field Unit (X-IFU) on board the Athena mission. Under the FDM scheme, TESs are coupled to a passive LC filter and biased with alternating current (AC bias) at MHz frequencies. Using high-quality factor LC filters and room temperature electronics developed at SRON and low-noise two-stage SQUID amplifiers provi…
▽ More
Frequency domain multiplexing (FDM) is the baseline readout system for the X-ray Integral Field Unit (X-IFU) on board the Athena mission. Under the FDM scheme, TESs are coupled to a passive LC filter and biased with alternating current (AC bias) at MHz frequencies. Using high-quality factor LC filters and room temperature electronics developed at SRON and low-noise two-stage SQUID amplifiers provided by VTT, we have recently demonstrated good performance with the FDM readout of Mo/Au TES calorimeters with Au/Bi absorbers. We have achieved a performance requested for the demonstration model (DM) with the single pixel AC bias ($ΔE=$1.8 eV) and 9 pixel multiplexing ($ΔE=$2.6 eV) modes. We have also demonstrated 14-pixel multiplexing with an average energy resolution of 3.3 eV, which is limited by non-fundamental issues related to FDM readout in our lab setup.
△ Less
Submitted 26 March, 2020;
originally announced March 2020.
-
Audio-Visual Spatial Aligment Requirements of Central and Peripheral Object Events
Authors:
Davide Berghi,
Hanne Stenzel,
Marco Volino,
Adrian Hilton,
Philip J. B. Jackson
Abstract:
Immersive audio-visual perception relies on the spatial integration of both auditory and visual information which are heterogeneous sensing modalities with different fields of reception and spatial resolution. This study investigates the perceived coherence of audiovisual object events presented either centrally or peripherally with horizontally aligned/misaligned sound. Various object events were…
▽ More
Immersive audio-visual perception relies on the spatial integration of both auditory and visual information which are heterogeneous sensing modalities with different fields of reception and spatial resolution. This study investigates the perceived coherence of audiovisual object events presented either centrally or peripherally with horizontally aligned/misaligned sound. Various object events were selected to represent three acoustic feature classes. Subjective test results in a simulated virtual environment from 18 participants indicate a wider capture region in the periphery, with an outward bias favoring more lateral sounds. Centered stimulus results support previous findings for simpler scenes.
△ Less
Submitted 14 March, 2020;
originally announced March 2020.
-
Flexible circuits in the $d$-dimensional rigidity matroid
Authors:
Georg Grasegger,
Hakan Guler,
Bill Jackson,
Anthony Nixon
Abstract:
A bar-joint framework $(G,p)$ in $\mathbb{R}^d$ is rigid if the only edge-length preserving continuous motions of the vertices arise from isometries of $\mathbb{R}^d$. It is known that, when $(G,p)$ is generic, its rigidity depends only on the underlying graph $G$, and is determined by the rank of the edge set of $G$ in the generic $d$-dimensional rigidity matroid $\mathcal{R}_d$. Complete combina…
▽ More
A bar-joint framework $(G,p)$ in $\mathbb{R}^d$ is rigid if the only edge-length preserving continuous motions of the vertices arise from isometries of $\mathbb{R}^d$. It is known that, when $(G,p)$ is generic, its rigidity depends only on the underlying graph $G$, and is determined by the rank of the edge set of $G$ in the generic $d$-dimensional rigidity matroid $\mathcal{R}_d$. Complete combinatorial descriptions of the rank function of this matroid are known when $d=1,2$, and imply that all circuits in $\mathcal{R}_d$ are generically rigid in $\mathbb{R}^d$ when $d=1,2$. Determining the rank function of $\mathcal{R}_d$ is a long standing open problem when $d\geq 3$, and the existence of non-rigid circuits in $\mathcal{R}_d$ for $d\geq 3$ is a major contributing factor to why this problem is so difficult. We begin a study of non-rigid circuits by characterising the non-rigid circuits in $\mathcal{R}_d$ which have at most $d+6$ vertices.
△ Less
Submitted 24 March, 2023; v1 submitted 14 March, 2020;
originally announced March 2020.
-
Vertex Splitting, Coincident Realisations and Global Rigidity of Braced Triangulations
Authors:
James Cruickshank,
Bill Jackson,
Shin-ichi Tanigawa
Abstract:
We give a short proof of a result of Jordan and Tanigawa that a 4-connected graph which has a spanning planar triangulation as a proper subgraph is generically globally rigid in R^3. Our proof is based on a new sufficient condition for the so called vertex splitting operation to preserve generic global rigidity in R^d.
We give a short proof of a result of Jordan and Tanigawa that a 4-connected graph which has a spanning planar triangulation as a proper subgraph is generically globally rigid in R^3. Our proof is based on a new sufficient condition for the so called vertex splitting operation to preserve generic global rigidity in R^d.
△ Less
Submitted 21 March, 2022; v1 submitted 20 February, 2020;
originally announced February 2020.
-
Dust Devils on Titan
Authors:
Brian Jackson,
Ralph D. Lorenz,
Jason W. Barnes,
Michelle Szurgot
Abstract:
Conditions on Saturn's moon Titan suggest dust devils, which are convective, dust-laden plumes, may be active. Although the exact nature of dust on Titan is unclear, previous observations confirm an active aeolian cycle, and dust devils may play an important role in Titan's aeolian cycle, possibly contributing to regional transport of dust and even production of sand grains. The Dragonfly mission…
▽ More
Conditions on Saturn's moon Titan suggest dust devils, which are convective, dust-laden plumes, may be active. Although the exact nature of dust on Titan is unclear, previous observations confirm an active aeolian cycle, and dust devils may play an important role in Titan's aeolian cycle, possibly contributing to regional transport of dust and even production of sand grains. The Dragonfly mission to Titan will document dust devil and convective vortex activity and thereby provide a new window into these features, and our analysis shows that associated winds are likely to be modest and pose no hazard to the mission.
△ Less
Submitted 13 February, 2020;
originally announced February 2020.
-
HiveMind: A Scalable and Serverless Coordination Control Platform for UAV Swarms
Authors:
Justin Hu,
Ariana Bruno,
Brian Ritchken,
Brendon Jackson,
Mateo Espinosa,
Aditya Shah,
Christina Delimitrou
Abstract:
Swarms of autonomous devices are increasing in ubiquity and size. There are two main trains of thought for controlling devices in such swarms; centralized and distributed control. Centralized platforms achieve higher output quality but result in high network traffic and limited scalability, while decentralized systems are more scalable, but less sophisticated.
In this work we present HiveMind, a…
▽ More
Swarms of autonomous devices are increasing in ubiquity and size. There are two main trains of thought for controlling devices in such swarms; centralized and distributed control. Centralized platforms achieve higher output quality but result in high network traffic and limited scalability, while decentralized systems are more scalable, but less sophisticated.
In this work we present HiveMind, a centralized coordination control platform for IoT swarms that is both scalable and performant. HiveMind leverages a centralized cluster for all resource-intensive computation, deferring lightweight and time-critical operations, such as obstacle avoidance to the edge devices to reduce network traffic. HiveMind employs an event-driven serverless framework to run tasks on the cluster, guarantees fault tolerance both in the edge devices and serverless functions, and handles straggler tasks and underperforming devices. We evaluate HiveMind on a swarm of 16 programmable drones on two scenarios; searching for given items, and counting unique people in an area. We show that HiveMind achieves better performance and battery efficiency compared to fully centralized and fully decentralized platforms, while also handling load imbalances and failures gracefully, and allowing edge devices to leverage the cluster to collectively improve their output quality.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Abstract 3-Rigidity and Bivariate $C_2^1$-Splines II: Combinatorial Characterization
Authors:
Katie Clinch,
Bill Jackson,
Shin-ichi Tanigawa
Abstract:
We showed in the first paper of this series that the generic $C_2^1$-cofactor matroid is the unique maximal abstract $3$-rigidity matroid. In this paper we obtain a combinatorial characterization of independence in this matroid. This solves the cofactor counterpart of the combinatorial characterization problem for the rigidity of generic 3-dimensional bar-joint frameworks. We use our characterizat…
▽ More
We showed in the first paper of this series that the generic $C_2^1$-cofactor matroid is the unique maximal abstract $3$-rigidity matroid. In this paper we obtain a combinatorial characterization of independence in this matroid. This solves the cofactor counterpart of the combinatorial characterization problem for the rigidity of generic 3-dimensional bar-joint frameworks. We use our characterization to verify that the counterparts of conjectures of Dress (on the rank function) and Lovász and Yemini (which suggested a sufficient connectivity condition for rigidity) hold for this matroid.
△ Less
Submitted 12 May, 2022; v1 submitted 1 November, 2019;
originally announced November 2019.
-
Abstract 3-Rigidity and Bivariate $C_2^1$-Splines I: Whiteley's Maximality Conjecture
Authors:
Katie Clinch,
Bill Jackson,
Shin-ichi Tanigawa
Abstract:
A conjecture of Graver from 1991 states that the generic $3$-dimensional rigidity matroid is the unique maximal abstract $3$-rigidity matroid with respect to the weak order on matroids. Based on a close similarity between the generic $d$-dimensional rigidity matroid and the generic $C_{d-2}^{d-1}$-cofactor matroid from approximation theory, Whiteley made an analogous conjecture in 1996 that the ge…
▽ More
A conjecture of Graver from 1991 states that the generic $3$-dimensional rigidity matroid is the unique maximal abstract $3$-rigidity matroid with respect to the weak order on matroids. Based on a close similarity between the generic $d$-dimensional rigidity matroid and the generic $C_{d-2}^{d-1}$-cofactor matroid from approximation theory, Whiteley made an analogous conjecture in 1996 that the generic $C_{d-2}^{d-1}$-cofactor matroid is the unique maximal abstract $d$-rigidity matroid for all $d\geq 2$. We verify the case $d=3$ of Whiteley's conjecture in this paper. A key step in our proof is to verify a second conjecture of Whiteley that the `double V-replacement operation' preserves independence in the generic $C_2^1$-cofactor matroid.
△ Less
Submitted 22 April, 2022; v1 submitted 1 November, 2019;
originally announced November 2019.
-
On the Relationship between Dust Devil Radii and Heights
Authors:
Brian Jackson
Abstract:
The influence of dust devils on the martian atmosphere depends on their capacity to loft dust, which depends on their wind profiles and footprint on the martian surface, i.e., on their radii, $R$. Previous work suggests the wind profile depends on a devil's thermodynamic efficiency, which scales with its height, $h$. However, the precise mechanisms that set a dust devil's radius have remained uncl…
▽ More
The influence of dust devils on the martian atmosphere depends on their capacity to loft dust, which depends on their wind profiles and footprint on the martian surface, i.e., on their radii, $R$. Previous work suggests the wind profile depends on a devil's thermodynamic efficiency, which scales with its height, $h$. However, the precise mechanisms that set a dust devil's radius have remained unclear. Combining previous work with simple assumptions about angular momentum conservation in dust devils predicts that $R \propto h^{1/2}$, and a model fit to observed radii and heights from a survey of martian dust devils using the Mars Express High Resolution Stereo Camera agrees reasonably well with this prediction. Other observational tests involving additional, statistically robust dust devil surveys and field measurements may further elucidate these relationships.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Validation of the Alfvén Wave Solar atmosphere Model (AWSoM) with Observations from the Low Corona to 1 AU
Authors:
N. Sachdeva,
B. van der Holst,
W. B. Manchester,
G. Tóth,
Y. Chen,
D. G. Lloveras,
A. M. Vásquez,
Philippe Lamy,
Julien Wojak,
B. V. Jackson,
H. -S. Yu,
C. J. Henney
Abstract:
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the…
▽ More
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the low corona ($r < 1.25$ \Rs), we compare with EUV images from both STEREO-A/EUVI and SDO/AIA and to three-dimensional (3-D) tomographic reconstructions of the electron temperature and density based on these same data. We also compare the model to tomographic reconstructions of the electron density from SOHO/LASCO observations ($2.55 < r < 6.0$\Rs). In the heliosphere, we compare model predictions of solar wind speed with velocity reconstructions from InterPlanetary Scintillation (IPS) observations. For comparison with observations near the Earth, we use OMNI data. Our results show that the improved AWSoM model performs well in quantitative agreement with the observations between the inner corona and 1 AU. The model now reproduces the fast solar wind speed in the polar regions. Near the Earth, our model shows good agreement with observations of solar wind velocity, proton temperature and density. AWSoM offers an extensive application to study the solar corona and larger heliosphere in concert with current and future solar missions as well as being well suited for space weather predictions.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Modeling the Comb Filter Effect and Interaural Coherence for Binaural Source Separation
Authors:
Luca Remaggi,
Philip J. B. Jackson,
Wenwu Wang
Abstract:
Typical methods for binaural source separation consider only the direct sound as the target signal in a mixture. However, in most scenarios, this assumption limits the source separation performance. It is well known that the early reflections interact with the direct sound, producing acoustic effects at the listening position, e.g. the so-called comb filter effect. In this article, we propose a no…
▽ More
Typical methods for binaural source separation consider only the direct sound as the target signal in a mixture. However, in most scenarios, this assumption limits the source separation performance. It is well known that the early reflections interact with the direct sound, producing acoustic effects at the listening position, e.g. the so-called comb filter effect. In this article, we propose a novel source separation model, that utilizes both the direct sound and the first early reflection information to model the comb filter effect. This is done by observing the interaural phase difference obtained from the time-frequency representation of binaural mixtures. Furthermore, a method is proposed to model the interaural coherence of the signals. Including information related to the sound multipath propagation, the performance of the proposed separation method is improved with respect to the baselines that did not use such information, as illustrated by using binaural recordings made in four rooms, having different sizes and reverberation times.
△ Less
Submitted 4 October, 2019;
originally announced October 2019.
-
Global rigidity of 2-dimensional linearly constrained frameworks
Authors:
Hakan Guler,
Bill Jackson,
Anthony Nixon
Abstract:
A linearly constrained framework in $\mathbb{R}^d$ is a point configuration together with a system of constraints which fixes the distances between some pairs of points and additionally restricts some of the points to lie in given affine subspaces. It is globally rigid if the configuration is uniquely defined by the constraint system, and is rigid if it is uniquely defined within some small open n…
▽ More
A linearly constrained framework in $\mathbb{R}^d$ is a point configuration together with a system of constraints which fixes the distances between some pairs of points and additionally restricts some of the points to lie in given affine subspaces. It is globally rigid if the configuration is uniquely defined by the constraint system, and is rigid if it is uniquely defined within some small open neighbourhood. Streinu and Theran characterised generic rigidity of linearly constrained frameworks in $\mathbb{R}^2$ in 2010. We obtain an analagous characterisation for generic global rigidity in $\mathbb{R}^2$. More precisely we show that a generic linearly constrained framework in $\mathbb{R}^2$ is globally rigid if and only if it is redundantly rigid and `balanced'. For generic frameworks which are not balanced, we determine the precise number of solutions to the constraint system whenever the underlying rigidity matroid of the given framework is connected. We also obtain a stress matrix sufficient condition and a Hendrickson type necessary condition for a generic linearly constrained framework to be globally rigid in $\mathbb{R}^d$.
△ Less
Submitted 17 July, 2019; v1 submitted 26 June, 2019;
originally announced June 2019.
-
Single-Channel Signal Separation and Deconvolution with Generative Adversarial Networks
Authors:
Qiuqiang Kong,
Yong Xu,
Wenwu Wang,
Philip J. B. Jackson,
Mark D. Plumbley
Abstract:
Single-channel signal separation and deconvolution aims to separate and deconvolve individual sources from a single-channel mixture and is a challenging problem in which no prior knowledge of the mixing filters is available. Both individual sources and mixing filters need to be estimated. In addition, a mixture may contain non-stationary noise which is unseen in the training set. We propose a synt…
▽ More
Single-channel signal separation and deconvolution aims to separate and deconvolve individual sources from a single-channel mixture and is a challenging problem in which no prior knowledge of the mixing filters is available. Both individual sources and mixing filters need to be estimated. In addition, a mixture may contain non-stationary noise which is unseen in the training set. We propose a synthesizing-decomposition (S-D) approach to solve the single-channel separation and deconvolution problem. In synthesizing, a generative model for sources is built using a generative adversarial network (GAN). In decomposition, both mixing filters and sources are optimized to minimize the reconstruction error of the mixture. The proposed S-D approach achieves a peak-to-noise-ratio (PSNR) of 18.9 dB and 15.4 dB in image inpainting and completion, outperforming a baseline convolutional neural network PSNR of 15.3 dB and 12.2 dB, respectively and achieves a PSNR of 13.2 dB in source separation together with deconvolution, outperforming a convolutive non-negative matrix factorization (NMF) baseline of 10.1 dB.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
An Open-Source Benchmark Suite for Cloud and IoT Microservices
Authors:
Yu Gan,
Yanqi Zhang,
Dailun Cheng,
Ankitha Shetty,
Priyal Rathi,
Nayan Katarki,
Ariana Bruno,
Justin Hu,
Brian Ritchken,
Brendon Jackson,
Kelvin Hu,
Meghna Pancholi,
Yuan He,
Brett Clancy,
Chris Colen,
Fukang Wen,
Catherine Leung,
Siyuan Wang,
Leon Zaruvinsky,
Mateo Espinosa,
Rick Lin,
Zhongling Liu,
Jake Padilla,
Christina Delimitrou
Abstract:
Cloud services have recently started undergoing a major shift from monolithic applications, to graphs of hundreds of loosely-coupled microservices. Microservices fundamentally change a lot of assumptions current cloud systems are designed with, and present both opportunities and challenges when optimizing for quality of service (QoS) and utilization. In this paper we explore the implications micro…
▽ More
Cloud services have recently started undergoing a major shift from monolithic applications, to graphs of hundreds of loosely-coupled microservices. Microservices fundamentally change a lot of assumptions current cloud systems are designed with, and present both opportunities and challenges when optimizing for quality of service (QoS) and utilization. In this paper we explore the implications microservices have across the cloud system stack. We first present DeathStarBench, a novel, open-source benchmark suite built with microservices that is representative of large end-to-end services, modular and extensible. DeathStarBench includes a social network, a media service, an e-commerce site, a banking system, and IoT applications for coordination control of UAV swarms. We then use DeathStarBench to study the architectural characteristics of microservices, their implications in networking and operating systems, their challenges with respect to cluster management, and their trade-offs in terms of application design and programming frameworks. Finally, we explore the tail at scale effects of microservices in real deployments with hundreds of users, and highlight the increased pressure they put on performance predictability.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Variability in the Atmosphere of the Hot Jupiter Kepler-76b
Authors:
Brian Jackson,
Elisabeth Adams,
Wesley Sandidge,
Steven Kreyche,
Jennifer Briggs
Abstract:
Phase curves and secondary eclipses of gaseous exoplanets are diagnostic of atmospheric composition and meteorology, and the long observational baseline and high photometric precision from the Kepler Mission make its dataset well-suited for exploring phase curve variability, which provides additional insights into atmospheric dynamics. Observations of the hot Jupiter Kepler-76b span more than 1,00…
▽ More
Phase curves and secondary eclipses of gaseous exoplanets are diagnostic of atmospheric composition and meteorology, and the long observational baseline and high photometric precision from the Kepler Mission make its dataset well-suited for exploring phase curve variability, which provides additional insights into atmospheric dynamics. Observations of the hot Jupiter Kepler-76b span more than 1,000 days, providing an ideal dataset to search for atmospheric variability. In this study, we find that Kepler-76b's secondary eclipse, with a depth of $87 \pm 6$ parts-per-million (ppm), corresponds to an effective temperature of 2,830$^{+50}_{-30}$ K. Our results also show clear indications of variability in Kepler-76b's atmospheric emission and reflectivity, with the phase curve amplitude typically $50.5 \pm 1.3$ ppm but varying between 35 and 70 ppm over tens of days. As is common for hot Jupiters, Kepler-76b's phase curve shows a discernible offset of $\left( 9 \pm 1.3 \right)^\circ$ eastward of the sub-stellar point and varying in concert with the amplitude. These variations may arise from the advance and retreat of thermal structures and cloud formations in Kepler-76b's atmosphere; the resulting thermal perturbations may couple with the super-rotation expected to transport aerosols, giving rise to a feedback loop. Looking forward, the TESS Mission can provide new insight into planetary atmospheres, with good prospects to observe both secondary eclipses and phase curves among targets from the mission. TESS's increased sensitivity in red wavelengths as compared to Kepler means that it will probably probe different aspects of planetary atmospheres.
△ Less
Submitted 19 May, 2019;
originally announced May 2019.
-
The SAFARI Detector System
Authors:
Michael D. Audley,
Gert de Lange,
Jian-Rong Gao,
Brian D. Jackson,
Richard A. Hijmering,
Marcel L. Ridder,
Marcel P. Bruijn,
Peter R. Roelfsema,
Peter A. R. Ade,
Stafford Withington,
Charles M. Bradford,
Neal A. Trappe
Abstract:
We give an overview of the baseline detector system for SAFARI, the prime focal-plane instrument on board the proposed space infrared observatory, SPICA. SAFARI's detectors are based on superconducting Transition Edge Sensors (TES) to provide the extreme sensitivity (dark NEP$\le2\times10^{-19}\rm\ W/\sqrt Hz$) needed to take advantage of SPICA's cold (<8 K) telescope. In order to read out the tot…
▽ More
We give an overview of the baseline detector system for SAFARI, the prime focal-plane instrument on board the proposed space infrared observatory, SPICA. SAFARI's detectors are based on superconducting Transition Edge Sensors (TES) to provide the extreme sensitivity (dark NEP$\le2\times10^{-19}\rm\ W/\sqrt Hz$) needed to take advantage of SPICA's cold (<8 K) telescope. In order to read out the total of ~3500 detectors we use frequency domain multiplexing (FDM) with baseband feedback. In each multiplexing channel, a two-stage SQUID preamplifier reads out 160 detectors. We describe the detector system and discuss some of the considerations that informed its design.
△ Less
Submitted 18 July, 2018; v1 submitted 17 July, 2018;
originally announced July 2018.
-
The Athena X-ray Integral Field Unit
Authors:
Didier Barret,
Thien Lam Trong,
Jan-Willem den Herder,
Luigi Piro,
Massimo Cappi,
Juhani Huovelin,
Richard Kelley,
J. Miguel Mas-Hesse,
Kazuhisa Mitsuda,
Stéphane Paltani,
Gregor Rauw,
Agata Rozanska,
Joern Wilms,
Simon Bandler,
Marco Barbera,
Xavier Barcons,
Enrico Bozzo,
Maria Teresa Ceballos,
Ivan Charles,
Elisa Costantini,
Anne Decourchelle,
Roland den Hartog,
Lionel Duband,
Jean-Marc Duval,
Fabrizio Fiore
, et al. (78 additional authors not shown)
Abstract:
The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at…
▽ More
The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at about 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 microns. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of about 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a 3He sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (>50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
To Centralize or Not to Centralize: A Tale of Swarm Coordination
Authors:
Justin Hu,
Ariana Bruno,
Drew Zagieboylo,
Mark Zhao,
Brian Ritchken,
Brendon Jackson,
Joo Yeon Chae,
Francois Mertil,
Mateo Espinosa,
Christina Delimitrou
Abstract:
Large swarms of autonomous devices are increasing in size and importance. When it comes to controlling the devices of large-scale swarms there are two main lines of thought. Centralized control, where all decisions - and often compute - happen in a centralized back-end cloud system, and distributed control, where edge devices are responsible for selecting and executing tasks with minimal or zero h…
▽ More
Large swarms of autonomous devices are increasing in size and importance. When it comes to controlling the devices of large-scale swarms there are two main lines of thought. Centralized control, where all decisions - and often compute - happen in a centralized back-end cloud system, and distributed control, where edge devices are responsible for selecting and executing tasks with minimal or zero help from a centralized entity. In this work we aim to quantify the trade-offs between the two approaches with respect to task assignment quality, latency, and reliability. We do so first on a local swarm of 12 programmable drones with a 10-server cluster as the backend cloud, and then using a validated simulator to study the tail at scale effects of swarm coordination control. We conclude that although centralized control almost always outperforms distributed in the quality of its decisions, it faces significant scalability limitations, and we provide a list of system challenges that need to be addressed for centralized control to scale.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Rigidity of linearly-constrained frameworks
Authors:
James Cruickshank,
Hakan Guler,
Bill Jackson,
Anthony Nixon
Abstract:
We consider the problem of characterising the generic rigidity of bar-joint frameworks in $\mathbb{R}^d$ in which each vertex is constrained to lie in a given affine subspace. The special case when $d=2$ was previously solved by I. Streinu and L. Theran in 2010. We will extend their characterisation to the case when $d\geq 3$ and each vertex is constrained to lie in an affine subspace of dimension…
▽ More
We consider the problem of characterising the generic rigidity of bar-joint frameworks in $\mathbb{R}^d$ in which each vertex is constrained to lie in a given affine subspace. The special case when $d=2$ was previously solved by I. Streinu and L. Theran in 2010. We will extend their characterisation to the case when $d\geq 3$ and each vertex is constrained to lie in an affine subspace of dimension $t$, when $t=1,2$ and also when $t\geq 3$ and $d\geq t(t-1)$. We then point out that results on body-bar frameworks obtained by N. Katoh and S. Tanigawa in 2013 can be used to characterise when a graph has a rigid realisation as a $d$-dimensional body-bar framework with a given set of linear constraints.
△ Less
Submitted 29 June, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
SPICA - a large cryogenic infrared space telescope Unveiling the obscured Universe
Authors:
P. R. Roelfsema,
H. Shibai,
L. Armus,
D. Arrazola,
M. Audard,
M. D. Audley,
C. M. Bradford,
I. Charles,
P. Dieleman,
Y. Doi,
L. Duband,
M. Eggens,
J. Evers,
I. Funaki,
J. R. Gao,
M. Giard,
A. di Giorgio L. M. González Fernández,
M. Griffin,
F. P. Helmich,
R. Hijmering,
R. Huisman,
D. Ishihara,
N. Isobe,
B. Jackson,
H. Jacobs
, et al. (44 additional authors not shown)
Abstract:
Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured…
▽ More
Measurements in the infrared wavelength domain allow us to assess directly the physical state and energy balance of cool matter in space, thus enabling the detailed study of the various processes that govern the formation and early evolution of stars and planetary systems in galaxies over cosmic time. Previous infrared missions, from IRAS to Herschel, have revealed a great deal about the obscured Universe, but sensitivity has been limited because up to now it has not been possible to fly a telescope that is both large and cold.
SPICA is a mission concept aimed at taking the next step in mid- and far-infrared observational capability by combining a large and cold telescope with instruments employing state-of-the-art ultra-sensitive detectors. The mission concept foresees a 2.5-meter diameter telescope cooled to below 8 K. With cooling provided by mechanical coolers instead of depending on a limited cryogen supply, the mission lifetime can extend significantly beyond the required three years.
SPICA offers instrumentation with spectral resolving powers ranging from R ~50 through 11000 in the 17-230 $μ$m domain as well as R~28.000 spectroscopy between 12 and 18 $μ$m. Additionally SPICA will provide efficient 30-37 $μ$m broad band map**, and polarimetric imaging in the 100-350 $μ$m range. SPICA will provide unprecedented spectroscopic sensitivity of ~5 x $10^{-20}$ W/m$^2$ (5$σ$/1hr) - at least two orders of magnitude improvement over what has been attained to date.
With this exceptional leap in performance, new domains in infrared astronomy will become accessible, allowing us, for example, to unravel definitively galaxy evolution and metal production over cosmic time, to study dust formation and evolution from very early epochs onwards, and to trace the formation history of planetary systems.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
Investigating Planet Formation and Evolutionary Processes with Short-Period Exoplanets
Authors:
Brian Jackson,
Elisabeth Adams,
René Heller,
Michael Endl
Abstract:
From wispy gas giants on the verge of disruption to tiny rocky bodies already falling apart, short-period exoplanets pose a severe puzzle to theories of planet formation and orbital evolution. By far most of the planets known beyond the solar system orbit their stars in much tighter orbits than the most close-in planet in the solar system, Mercury. Short-period planets experienced dynamical and ev…
▽ More
From wispy gas giants on the verge of disruption to tiny rocky bodies already falling apart, short-period exoplanets pose a severe puzzle to theories of planet formation and orbital evolution. By far most of the planets known beyond the solar system orbit their stars in much tighter orbits than the most close-in planet in the solar system, Mercury. Short-period planets experienced dynamical and evolutions histories distinct from their farther-out cousins, and so it's not clear they are representative of all planets. These exoplanets typically have radii between about 1 and 4 Earth radii, whereas the solar system does not contain any planet in this radius range. And while the most massive planets in the solar system occupy the icy regions beyond about 5 AU from the sun, about 1% of sun-like stars have a Jupiter-mass planet near 0.05 AU, with just a few days of an orbital period. How did these short-period planets get there? Did they form in-situ, or did they migrate towards their contemporary orbits? If they migrated, what prevented them from falling into their stars? Vice versa, could some of the remaining 99% of stars without such a hot Jupiter show evidence of their past consumption of a close-in, massive planet? The proximity between short-period planets and their host stars naturally facilitates observational studies, and so short-period planets dominate our observational constraints on planetary composition, internal structure, meteorology, and more. This white paper discusses the unique advantages of short-period planets for the theoretical and observational investigations of exoplanets in general and of their host stars.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Accretion of Planetary Material onto Host Stars
Authors:
Brian Jackson,
Joleen Carlberg
Abstract:
Accretion of planetary material onto host stars may occur throughout a star's life. Especially prone to accretion, extrasolar planets in short-period orbits, while relatively rare, constitute a significant fraction of the known population, and these planets are subject to dynamical and atmospheric influences that can drive significant mass loss. Theoretical models frame expectations regarding the…
▽ More
Accretion of planetary material onto host stars may occur throughout a star's life. Especially prone to accretion, extrasolar planets in short-period orbits, while relatively rare, constitute a significant fraction of the known population, and these planets are subject to dynamical and atmospheric influences that can drive significant mass loss. Theoretical models frame expectations regarding the rates and extent of this planetary accretion. For instance, tidal interactions between planets and stars may drive complete orbital decay during the main sequence. Many planets that survive their stars' main sequence lifetime will still be engulfed when the host stars become red giant stars. There is some observational evidence supporting these predictions, such as a dearth of close-in planets around fast stellar rotators, which is consistent with tidal spin-up and planet accretion. There remains no clear chemical evidence for pollution of the atmospheres of main sequence or red giant stars by planetary materials, but a wealth of evidence points to active accretion by white dwarfs. In this article, we review the current understanding of accretion of planetary material, from the pre- to the post-main sequence and beyond. The review begins with the astrophysical framework for that process and then considers accretion during various phases of a host star's life, during which the details of accretion vary, and the observational evidence for accretion during these phases.
△ Less
Submitted 20 September, 2017;
originally announced September 2017.
-
Interplanetary Scintillation with the Murchison Widefield Array I: A sub-arcsecond Survey over 900 square degrees at 79 and 158 MHz
Authors:
J . S. Morgan,
J-P. Macquart,
R. Ekers,
R. Chhetri,
M. Tokumaru,
P. K. Manoharan,
S. Tremblay,
M. M. Bisi,
B. V. Jackson
Abstract:
We present the first dedicated observations of Interplanetary Scintillation (IPS) with the Murchison Widefield Array (MWA). We have developed a synthesis imaging technique, tailored to the properties of modern "large-N" low-frequency radio telescopes. This allows us to image the variability on IPS timescales across 900 square degrees simultaneously. We show that for our observations, a sampling ra…
▽ More
We present the first dedicated observations of Interplanetary Scintillation (IPS) with the Murchison Widefield Array (MWA). We have developed a synthesis imaging technique, tailored to the properties of modern "large-N" low-frequency radio telescopes. This allows us to image the variability on IPS timescales across 900 square degrees simultaneously. We show that for our observations, a sampling rate of just 2Hz is sufficient to resolve the IPS signature of most sources. We develop tests to ensure that IPS variability is separated from ionospheric or instrumental variability. We validate our results by comparison with existing catalogues of IPS sources, and near-contemporaneous observations by other IPS facilities. Using just five minutes of data, we produce catalogues at both 79MHz and 158MHz, each containing over 350 scintillating sources. At the field centre we detect approximately one scintillating source per square degree, with a minimum scintillating flux density at 158MHz of 110mJy, corresponding to a compact flux density of approximately 400mJy. Each of these sources is a known radio source, however only a minority were previously known to contain sub-arcsecond components. We discuss our findings and the prospects they hold for future astrophysical and heliospheric studies.
△ Less
Submitted 3 September, 2017; v1 submitted 1 September, 2017;
originally announced September 2017.
-
A Framework for Relating the Structures and Recovery Statistics in Pressure Time-Series Surveys for Dust Devils
Authors:
Brian Jackson,
Ralph Lorenz,
Karan Davis
Abstract:
Dust devils are likely the dominant source of dust for the martian atmosphere, but the amount and frequency of dust-lifting depend on the statistical distribution of dust devil parameters. Dust devils exhibit pressure perturbations and, if they pass near a barometric sensor, they may register as a discernible dip in a pressure time-series. Leveraging this fact, several surveys using barometric sen…
▽ More
Dust devils are likely the dominant source of dust for the martian atmosphere, but the amount and frequency of dust-lifting depend on the statistical distribution of dust devil parameters. Dust devils exhibit pressure perturbations and, if they pass near a barometric sensor, they may register as a discernible dip in a pressure time-series. Leveraging this fact, several surveys using barometric sensors on landed spacecraft have revealed dust devil structures and occurrence rates. However powerful they are, though, such surveys suffer from non-trivial biases that skew the inferred dust devil properties. For example, such surveys are most sensitive to dust devils with the widest and deepest pressure profiles, but the recovered profiles will be distorted, broader and shallow than the actual profiles. In addition, such surveys often do not provide wind speed measurements alongside the pressure time series, and so the durations of the dust devil signals in the time series cannot be directly converted to profile widths. Fortunately, simple statistical and geometric considerations can de-bias these surveys, allowing conversion of the duration of dust devil signals into physical widths, given only a distribution of likely translation velocities, and the recovery of the underlying distributions of physical parameters. In this study, we develop a scheme for de-biasing such surveys. Applying our model to an in-situ survey using data from the Phoenix lander suggests a larger dust flux and a dust devil occurrence rate about ten times larger than previously inferred. Comparing our results to dust devil track surveys suggests only about one in five low-pressure cells lifts sufficient dust to leave a visible track.
△ Less
Submitted 1 August, 2017;
originally announced August 2017.
-
Point-hyperplane frameworks, slider joints, and rigidity preserving transformations
Authors:
Yaser Eftekhari,
Bill Jackson,
Anthony Nixon,
Bernd Schulze,
Shin-ichi Tanigawa,
Walter Whiteley
Abstract:
A one-to-one correspondence between the infinitesimal motions of bar-joint frameworks in $\mathbb{R}^d$ and those in $\mathbb{S}^d$ is a classical observation by Pogorelov, and further connections among different rigidity models in various different spaces have been extensively studied. In this paper, we shall extend this line of research to include the infinitesimal rigidity of frameworks consist…
▽ More
A one-to-one correspondence between the infinitesimal motions of bar-joint frameworks in $\mathbb{R}^d$ and those in $\mathbb{S}^d$ is a classical observation by Pogorelov, and further connections among different rigidity models in various different spaces have been extensively studied. In this paper, we shall extend this line of research to include the infinitesimal rigidity of frameworks consisting of points and hyperplanes. This enables us to understand correspondences between point-hyperplane rigidity, classical bar-joint rigidity, and scene analysis.
Among other results, we derive a combinatorial characterization of graphs that can be realized as infinitesimally rigid frameworks in the plane with a given set of points collinear. This extends a result by Jackson and Jordán, which deals with the case when three points are collinear.
△ Less
Submitted 20 March, 2017;
originally announced March 2017.
-
A New Model of Roche-lobe Overflow for Short-Period Gaseous Planets and Binary Stars
Authors:
Brian Jackson,
Phil Arras,
Kaloyan Penev,
Sarah Peacock,
Pablo Marchant
Abstract:
Some close-in gaseous exoplanets are nearly in Roche-lobe contact, and previous studies show tidal decay can drive hot Jupiters into contact during the main sequence of their host stars. Improving upon a previous model, we present a revised model for mass transfer in a semi-detached binary system that incorporates an extended atmosphere around the donor and allows for an arbitrary mass ratio. We a…
▽ More
Some close-in gaseous exoplanets are nearly in Roche-lobe contact, and previous studies show tidal decay can drive hot Jupiters into contact during the main sequence of their host stars. Improving upon a previous model, we present a revised model for mass transfer in a semi-detached binary system that incorporates an extended atmosphere around the donor and allows for an arbitrary mass ratio. We apply this new formalism to hypothetical, confirmed, and candidate planetary systems to estimate mass loss rates and compare with models of evaporative mass loss. Overflow may be significant for hot Neptunes out to periods of $\sim$ 2 days, while for hot Jupiters, it may only be important inward of 0.5 days. We find that CoRoT-24 b may be losing mass at a rate of more than an Earth mass in a Gyr. The hot Jupiter WASP-12 b may lose an Earth mass in a Myr, while the putative planet orbiting a T-Tauri star PTFO8-8695 might shed its atmosphere in a few Myrs. We point out that the orbital expansion that can accompany mass transfer may be less effective than previously considered because the gas accreted by the host star removes some of the system's angular momentum from the orbit, but simple scaling arguments suggest that the Roche-lobe overflow might remain stable. Consequently, the recently discovered small planets in ultra-short-periods ($<$ 1 day) may not be the remnants of hot Jupiters/Neptunes. The new model presented here has been incorporated into Modules for Experiments in Stellar Astrophysics (MESA).
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Optimising the multiplex factor of the frequency domain multiplexed readout of the TES-based microcalorimeter imaging array for the X-IFU instrument on the Athena Xray observatory
Authors:
J. van der Kuur,
L. G. Gottardi,
H. Akamatsu,
B. J. van Leeuwen,
R. den Hartog,
D. Haas,
M. Kiviranta,
B. J. Jackson
Abstract:
Athena is a space-based X-ray observatory intended for exploration of the hot and energetic universe. One of the science instruments on Athena will be the X-ray Integrated Field Unit (X-IFU), which is a cryogenic X-ray spectrometer, based on a large cryogenic imaging array of Transition Edge Sensors (TES) based microcalorimeters operating at a temperature of 100mK. The imaging array consists of 38…
▽ More
Athena is a space-based X-ray observatory intended for exploration of the hot and energetic universe. One of the science instruments on Athena will be the X-ray Integrated Field Unit (X-IFU), which is a cryogenic X-ray spectrometer, based on a large cryogenic imaging array of Transition Edge Sensors (TES) based microcalorimeters operating at a temperature of 100mK. The imaging array consists of 3800 pixels providing 2.5 eV spectral resolution, and covers a field of view with a diameter of of 5 arc minutes. Multiplexed readout of the cryogenic microcalorimeter array is essential to comply with the cooling power and complexity constraints on a space craft. Frequency domain multiplexing has been under development for the readout of TES-based detectors for this purpose, not only for the X-IFU detector arrays but also for TES-based bolometer arrays for the Safari instrument of the Japanese SPICA observatory. This paper discusses the design considerations which are applicable to optimise the multiplex factor within the boundary conditions as set by the space craft. More specifically, the interplay between the science requirements such as pixel dynamic range, pixel speed, and cross talk, and the space craft requirements such as the power dissipation budget, available bandwidth, and electromagnetic compatibility will be discussed.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
Development of frequency domain multiplexing for the X-ray Integral Field Unit (X-IFU) on the Athena
Authors:
Hiroki Akamatsu,
Luciano Gottardi,
Jan van der Kuur,
Cor P. de Vries,
Kevin Ravensberg,
Joseph S. Adams,
Simon R. Bandler,
Marcel P. Bruijn,
James A. Chervenak,
Caroline A Kilbourne,
Mikko Kiviranta,
A. J. van den Linden,
Brian D. Jackson,
Stephen J. Smith
Abstract:
We are develo** the frequency domain multiplexing (FDM) read-out of transition-edge sensor (TES) microcalorimeters for the X-ray Integral Field Unit (X-IFU) instrument on board of the future European X-Ray observatory Athena. The X-IFU instrument consists of an array of $\sim$3840 TESs with a high quantum efficiency ($>$90 \%) and spectral resolution $ΔE$=2.5 eV $@$ 7 keV ($E/ΔE\sim$2800). FDM i…
▽ More
We are develo** the frequency domain multiplexing (FDM) read-out of transition-edge sensor (TES) microcalorimeters for the X-ray Integral Field Unit (X-IFU) instrument on board of the future European X-Ray observatory Athena. The X-IFU instrument consists of an array of $\sim$3840 TESs with a high quantum efficiency ($>$90 \%) and spectral resolution $ΔE$=2.5 eV $@$ 7 keV ($E/ΔE\sim$2800). FDM is currently the baseline readout system for the X-IFU instrument. Using high quality factor LC filters and room temperature electronics developed at SRON and low-noise two stage SQUID amplifiers provided by VTT, we have recently demonstrated good performance with the FDM readout of Mo/Au TES calorimeters with Au/Bi absorbers. An integrated noise equivalent power resolution of about 2.0 eV at 1.7 MHz has been demonstrated with a pixel from a new TES array from NASA/Goddard (GSFC-A2). We have achieved X-ray energy resolutions $\sim$2.5 eV at AC bias frequency at 1.7 MHz in the single pixel read-out. We have also demonstrated for the first time an X-ray energy resolution around 3.0 eV in a 6 pixel FDM read-out with TES array (GSFC-A1). In this paper we report on the single pixel performance of these microcalorimeters under MHz AC bias, and further results of the performance of these pixels under FDM.
△ Less
Submitted 3 November, 2016;
originally announced November 2016.
-
Ultra Short Period Planets in K2 with companions: a double transiting system for EPIC 220674823
Authors:
Elisabeth R. Adams,
Brian Jackson,
Michael Endl,
William D. Cochran,
Phillip J. MacQueen,
Dmitry A. Duev,
Rebecca Jensen-Clem,
Maïssa Salama,
Carl Ziegler,
Christoph Baranec,
Shrinivas Kulkarni,
Nicholas M. Law,
Reed Riddle
Abstract:
Two transiting planets have been identified orbiting K2 target EPIC 220674823. One object is an ultra-short-period planet (USP) with a period of just 0.57 days (13.7 hours), while the other has a period of 13.3 days. Both planets are small, with the former having a radius of R_p1=1.5 R_E and the latter R_p2=2.5 R_E. Follow-up observations, including radial velocity (with uncertainties of 110 m/s)…
▽ More
Two transiting planets have been identified orbiting K2 target EPIC 220674823. One object is an ultra-short-period planet (USP) with a period of just 0.57 days (13.7 hours), while the other has a period of 13.3 days. Both planets are small, with the former having a radius of R_p1=1.5 R_E and the latter R_p2=2.5 R_E. Follow-up observations, including radial velocity (with uncertainties of 110 m/s) and high-resolution adaptive optics imagery, show no signs of stellar companions. EPIC 220674823 is the 12th confirmed or validated planetary system in which an ultra-short-period planet (i.e., having an orbital period less than 1 day) is accompanied by at least one additional planet, suggesting that such systems may be common and must be accounted for in models for the formation and evolution of such extreme systems.
△ Less
Submitted 18 January, 2017; v1 submitted 1 November, 2016;
originally announced November 2016.
-
Global rigidity of generic frameworks on the cylinder
Authors:
Bill Jackson,
Anthony Nixon
Abstract:
We show that a generic framework $(G,p)$ on the cylinder is globally rigid if and only if $G$ is a complete graph on at most four vertices or $G$ is both redundantly rigid and $2$-connected. To prove the theorem we also derive a new recursive construction of circuits in the simple $(2,2)$-sparse matroid, and a characterisation of rigidity for generic frameworks on the cylinder when a single design…
▽ More
We show that a generic framework $(G,p)$ on the cylinder is globally rigid if and only if $G$ is a complete graph on at most four vertices or $G$ is both redundantly rigid and $2$-connected. To prove the theorem we also derive a new recursive construction of circuits in the simple $(2,2)$-sparse matroid, and a characterisation of rigidity for generic frameworks on the cylinder when a single designated vertex is allowed to move off the cylinder.
△ Less
Submitted 14 October, 2018; v1 submitted 25 October, 2016;
originally announced October 2016.
-
Acoustic Reflector Localization: Novel Image Source Reversion and Direct Localization Methods
Authors:
Luca Remaggi,
Philip J. B. Jackson,
Philip Coleman,
Wenwu Wang
Abstract:
Acoustic reflector localization is an important issue in audio signal processing, with direct applications in spatial audio, scene reconstruction, and source separation. Several methods have recently been proposed to estimate the 3D positions of acoustic reflectors given room impulse responses (RIRs). In this article, we categorize these methods as "image-source reversion", which localizes the ima…
▽ More
Acoustic reflector localization is an important issue in audio signal processing, with direct applications in spatial audio, scene reconstruction, and source separation. Several methods have recently been proposed to estimate the 3D positions of acoustic reflectors given room impulse responses (RIRs). In this article, we categorize these methods as "image-source reversion", which localizes the image source before finding the reflector position, and "direct localization", which localizes the reflector without intermediate steps. We present five new contributions. First, an onset detector, called the clustered dynamic programming projected phase-slope algorithm, is proposed to automatically extract the time of arrival for early reflections within the RIRs of a compact microphone array. Second, we propose an image-source reversion method that uses the RIRs from a single loudspeaker. It is constructed by combining an image source locator (the image source direction and range (ISDAR) algorithm), and a reflector locator (using the loudspeaker-image bisection (LIB) algorithm). Third, two variants of it, exploiting multiple loudspeakers, are proposed. Fourth, we present a direct localization method, the ellipsoid tangent sample consensus (ETSAC), exploiting ellipsoid properties to localize the reflector. Finally, systematic experiments on simulated and measured RIRs are presented, comparing the proposed methods with the state-of-the-art. ETSAC generates errors lower than the alternative methods compared through our datasets. Nevertheless, the ISDAR-LIB combination performs well and has a run time 200 times faster than ETSAC.
△ Less
Submitted 5 January, 2017; v1 submitted 18 October, 2016;
originally announced October 2016.
-
The Athena X-ray Integral Field Unit (X-IFU)
Authors:
Didier Barret,
Thien Lam Trong,
Jan-Willem den Herder,
Luigi Piro,
Xavier Barcons,
Juhani Huovelin,
Richard Kelley,
J. Miguel Mas-Hesse,
Kazuhisa Mitsuda,
Stéphane Paltani,
Gregor Rauw,
Agata Rożanska,
Joern Wilms,
Marco Barbera,
Enrico Bozzo,
Maria Teresa Ceballos,
Ivan Charles,
Anne Decourchelle,
Roland den Hartog,
Jean-Marc Duval,
Fabrizio Fiore,
Flavio Gatti,
Andrea Goldwurm,
Brian Jackson,
Peter Jonker
, et al. (66 additional authors not shown)
Abstract:
The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, d…
▽ More
The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we briefly describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution).
The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan.
△ Less
Submitted 29 August, 2016;
originally announced August 2016.
-
Unsupervised Feature Learning Based on Deep Models for Environmental Audio Tagging
Authors:
Yong Xu,
Qiang Huang,
Wenwu Wang,
Peter Foster,
Siddharth Sigtia,
Philip J. B. Jackson,
Mark D. Plumbley
Abstract:
Environmental audio tagging aims to predict only the presence or absence of certain acoustic events in the interested acoustic scene. In this paper we make contributions to audio tagging in two parts, respectively, acoustic modeling and feature learning. We propose to use a shrinking deep neural network (DNN) framework incorporating unsupervised feature learning to handle the multi-label classific…
▽ More
Environmental audio tagging aims to predict only the presence or absence of certain acoustic events in the interested acoustic scene. In this paper we make contributions to audio tagging in two parts, respectively, acoustic modeling and feature learning. We propose to use a shrinking deep neural network (DNN) framework incorporating unsupervised feature learning to handle the multi-label classification task. For the acoustic modeling, a large set of contextual frames of the chunk are fed into the DNN to perform a multi-label classification for the expected tags, considering that only chunk (or utterance) level rather than frame-level labels are available. Dropout and background noise aware training are also adopted to improve the generalization capability of the DNNs. For the unsupervised feature learning, we propose to use a symmetric or asymmetric deep de-noising auto-encoder (sDAE or aDAE) to generate new data-driven features from the Mel-Filter Banks (MFBs) features. The new features, which are smoothed against background noise and more compact with contextual information, can further improve the performance of the DNN baseline. Compared with the standard Gaussian Mixture Model (GMM) baseline of the DCASE 2016 audio tagging challenge, our proposed method obtains a significant equal error rate (EER) reduction from 0.21 to 0.13 on the development set. The proposed aDAE system can get a relative 6.7% EER reduction compared with the strong DNN baseline on the development set. Finally, the results also show that our approach obtains the state-of-the-art performance with 0.15 EER on the evaluation set of the DCASE 2016 audio tagging task while EER of the first prize of this challenge is 0.17.
△ Less
Submitted 29 November, 2016; v1 submitted 13 July, 2016;
originally announced July 2016.
-
Rigid cylindrical frameworks with two coincident points
Authors:
Bill Jackson,
Viktoria Kaszanitzky,
Anthony Nixon
Abstract:
We develop a rigidity theory for frameworks in $\mathbb{R}^3$ which have two coincident points but are otherwise generic and only infinitesimal motions which are tangential to a family of cylinders induced by the realisation are considered. We then apply our results to show that vertex splitting, under the additional assumption that the new edge is redundant, preserves the property of being generi…
▽ More
We develop a rigidity theory for frameworks in $\mathbb{R}^3$ which have two coincident points but are otherwise generic and only infinitesimal motions which are tangential to a family of cylinders induced by the realisation are considered. We then apply our results to show that vertex splitting, under the additional assumption that the new edge is redundant, preserves the property of being generically globally rigid on families of concentric cylinders.
△ Less
Submitted 7 July, 2016;
originally announced July 2016.
-
Global rigidity of 2-dimensional direction-length frameworks
Authors:
Katie Clinch,
Bill Jackson,
Peter Keevash
Abstract:
A 2-dimensional direction-length framework is a collection of points in the plane which are linked by pairwise constraints that fix the direction or length of the line segments joining certain pairs of points. We represent it as a pair $(G,p)$, where $G=(V;D,L)$ is a `mixed' graph and $p:V\to{\mathbb R}^2$ is a point configuration for $V$. It is globally rigid if every direction-length framework…
▽ More
A 2-dimensional direction-length framework is a collection of points in the plane which are linked by pairwise constraints that fix the direction or length of the line segments joining certain pairs of points. We represent it as a pair $(G,p)$, where $G=(V;D,L)$ is a `mixed' graph and $p:V\to{\mathbb R}^2$ is a point configuration for $V$. It is globally rigid if every direction-length framework $(G,q)$ which satisfies the same constraints can be obtained from $(G,p)$ by a translation or a rotation by $180^\circ$. We show that the problem of characterising when a generic framework $(G,p)$ is globally rigid can be reduced to the case when $G$ belongs to a special family of `direction irreducible' mixed graphs, and prove that {every} generic realisation of a direction irreducible mixed graph $G$ is globally rigid if and only if $G$ is 2-connected, direction-balanced and redundantly rigid.
△ Less
Submitted 2 July, 2016;
originally announced July 2016.
-
Fully DNN-based Multi-label regression for audio tagging
Authors:
Yong Xu,
Qiang Huang,
Wenwu Wang,
Philip J. B. Jackson,
Mark D. Plumbley
Abstract:
Acoustic event detection for content analysis in most cases relies on lots of labeled data. However, manually annotating data is a time-consuming task, which thus makes few annotated resources available so far. Unlike audio event detection, automatic audio tagging, a multi-label acoustic event classification task, only relies on weakly labeled data. This is highly desirable to some practical appli…
▽ More
Acoustic event detection for content analysis in most cases relies on lots of labeled data. However, manually annotating data is a time-consuming task, which thus makes few annotated resources available so far. Unlike audio event detection, automatic audio tagging, a multi-label acoustic event classification task, only relies on weakly labeled data. This is highly desirable to some practical applications using audio analysis. In this paper we propose to use a fully deep neural network (DNN) framework to handle the multi-label classification task in a regression way. Considering that only chunk-level rather than frame-level labels are available, the whole or almost whole frames of the chunk were fed into the DNN to perform a multi-label regression for the expected tags. The fully DNN, which is regarded as an encoding function, can well map the audio features sequence to a multi-tag vector. A deep pyramid structure was also designed to extract more robust high-level features related to the target tags. Further improved methods were adopted, such as the Dropout and background noise aware training, to enhance its generalization capability for new audio recordings in mismatched environments. Compared with the conventional Gaussian Mixture Model (GMM) and support vector machine (SVM) methods, the proposed fully DNN-based method could well utilize the long-term temporal information with the whole chunk as the input. The results show that our approach obtained a 15% relative improvement compared with the official GMM-based method of DCASE 2016 challenge.
△ Less
Submitted 13 August, 2016; v1 submitted 24 June, 2016;
originally announced June 2016.
-
Antistrong digraphs
Authors:
Jorgen Bang-Jensen,
Stephane Bessy,
Bill Jackson,
Matthias Kriesell
Abstract:
An antidirected trail in a digraph is a trail (a walk with no arc repeated) in which the arcs alternate between forward and backward arcs. An antidirected path is an antidirected trail where no vertex is repeated. We show that it is NP-complete to decide whether two vertices $x,y$ in a digraph are connected by an antidirected path, while one can decide in linear time whether they are connected by…
▽ More
An antidirected trail in a digraph is a trail (a walk with no arc repeated) in which the arcs alternate between forward and backward arcs. An antidirected path is an antidirected trail where no vertex is repeated. We show that it is NP-complete to decide whether two vertices $x,y$ in a digraph are connected by an antidirected path, while one can decide in linear time whether they are connected by an antidirected trail. A digraph $D$ is antistrong if it contains an antidirected $(x,y)$-trail starting and ending with a forward arc for every choice of $x,y\in V(D)$. We show that antistrong connectivity can be decided in linear time. We discuss relations between antistrong connectivity and other properties of a digraph and show that the arc-minimal antistrong spanning subgraphs of a digraph are the bases of a matroid on its arc-set. We show that one can determine in polynomial time the minimum number of new arcs whose addition to $D$ makes the resulting digraph the arc-disjoint union of $k$ antistrong digraphs. In particular, we determine the minimum number of new arcs which need to be added to a digraph to make it antistrong. We use results from matroid theory to characterize graphs which have an antistrong orientation and give a polynomial time algorithm for constructing such an orientation when it exists. This immediately gives analogous results for graphs which have a connected bipartite 2-detachment. Finally, we study arc-decompositions of antistrong digraphs and pose several problems and conjectures.
△ Less
Submitted 25 May, 2016;
originally announced May 2016.
-
Workshop on Physics with Neutral Kaon Beam at JLab (KL2016) Mini-Proceedings
Authors:
M. Albrow,
M. Amaryan,
E. Chudakov,
P. Degtyarenko,
A. Feijoo,
C. Fernandez-Ramirez,
I. P. Fernando,
A. Filippi,
J. L. Goity,
H. Haberzettl,
B. C. Jackson,
H. Kamano,
C. Keith,
M. Kohl,
I. Larin,
Wei-Hong Liang,
V. K. Magas,
M. Mai,
D. M. Manley,
V. Mathieu,
F. Myhrer,
K. Nakayama,
H. Noumi,
Y. Oh,
H. Ohnishi
, et al. (12 additional authors not shown)
Abstract:
The KL2016 Workshop is following the Letter of Intent LoI12-15-001 "Physics Opportunities with Secondary KL beam at JLab" submitted to PAC43 with the main focus on the physics of excited hyperons produced by the Kaon beam on unpolarized and polarized targets with GlueX setup in Hall D. Such studies will broaden a physics program of hadron spectroscopy extending it to the strange sector. The Worksh…
▽ More
The KL2016 Workshop is following the Letter of Intent LoI12-15-001 "Physics Opportunities with Secondary KL beam at JLab" submitted to PAC43 with the main focus on the physics of excited hyperons produced by the Kaon beam on unpolarized and polarized targets with GlueX setup in Hall D. Such studies will broaden a physics program of hadron spectroscopy extending it to the strange sector. The Workshop was organized to get a feedback from the community to strengthen physics motivation of the LoI and prepare a full proposal.
Further details about the Workshop can be found on the web page of the conference: http://www.jlab.org/conferences/kl2016/index.html .
△ Less
Submitted 6 April, 2016;
originally announced April 2016.
-
Development of the superconducting detectors and read-out for the X-IFU instrument on board of the X-ray observatory Athena
Authors:
Luciano Gottardi,
Hiroki Akamatsu,
Marcel P. Bruijn,
Roland den Hartog,
Jan-Willem den Herder,
Brian Jackson,
Mikko Kiviranta,
Jan van der Kuur,
Henk van Weers
Abstract:
The Advanced Telescope for High-Energy Astrophysics (Athena) has been selected by ESA as its second large-class mission. The future European X-ray observatory will study the hot and energetic Universe with its launch foreseen in 2028. Microcalorimeters based on superconducting Transition-edge sensor (TES) are the chosen technology for the detectors array of the X-ray Integral Field Unit (X-IFU) on…
▽ More
The Advanced Telescope for High-Energy Astrophysics (Athena) has been selected by ESA as its second large-class mission. The future European X-ray observatory will study the hot and energetic Universe with its launch foreseen in 2028. Microcalorimeters based on superconducting Transition-edge sensor (TES) are the chosen technology for the detectors array of the X-ray Integral Field Unit (X-IFU) on board of Athena. The X-IFU is a 2-D imaging integral-field spectrometer operating in the soft X-ray band (0.3 -12 keV). The detector consists of an array of 3840 TESs coupled to X-ray absorbers and read out in the MHz bandwidth using Frequency Domain Multiplexing (FDM) based on Superconducting QUantum Interference Devices (SQUIDs). The proposed design calls for devices with a high filling-factor, high quantum efficiency, relatively high count-rate capability and an energy resolution of 2.5 eV at 5.9 keV. The paper will review the basic principle and the physics of the TES-based microcalorimeters and present the state-of-the art of the FDM read-out.
△ Less
Submitted 3 April, 2016;
originally announced April 2016.