-
Spectro-photometric properties of CoPhyLab's dust mixtures
Authors:
C. Feller,
A. Pommerol,
A. Lethuillier,
N. Hänni,
S. Schürch,
C. Bühr,
B. Gundlach,
B. Haenni,
N. Jäggi,
M. Kaminek,
the CoPhyLab Team
Abstract:
Objective: In the framework of the Cometary Physics Laboratory (CoPhyLab) and its sublimation experiments of cometary surface analogues under simulated space conditions, we characterize the properties of intimate mixtures of juniper charcoal and SiO$_2$ chosen as a dust analogue \citep{Lethuillier_2022}. We present the details of these investigations for the spectrophotometric properties of the sa…
▽ More
Objective: In the framework of the Cometary Physics Laboratory (CoPhyLab) and its sublimation experiments of cometary surface analogues under simulated space conditions, we characterize the properties of intimate mixtures of juniper charcoal and SiO$_2$ chosen as a dust analogue \citep{Lethuillier_2022}. We present the details of these investigations for the spectrophotometric properties of the samples.
Methods: We measured these properties using a hyperspectral imager and a radio-goniometer. From the samples' spectra, we evaluated reflectance ratios and spectral slopes. From the measured phase curves, we inverted a photometric model for all samples. Complementary characterizations were obtained using a pycnometer, a scanning electron microscope and an organic elemental analyser.
Results: We report the first values for the apparent porosity, elemental composition, and VIS-NIR spectrophotometric properties for juniper charcoal, as well as for intimate mixtures of this charcoal with the SiO$_2$. We find that the juniper charcoal drives the spectrophotometric properties of the intimate mixtures and that its strong absorbance is consistent with its elemental composition. We find that SiO$_2$ particles form large and compact agglomerates in every mixture imaged with the electron microscope, and its spectrophotometric properties are affected by such features and their particle-size distribution. We compare our results to the current literature on comets and other small Solar System bodies and find that most of the characterized properties of the dust analogue are comparable to some extent with the spacecraft-visited cometary nucleii, as well as to Centaurs, Trojans and the bluest TNOs.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Investigating the visible phase-curve variability of 55 Cnc e
Authors:
E. A. Meier Valdés,
B. M. Morris,
B. -O. Demory,
A. Brandeker,
D. Kitzmann,
W. Benz,
A. Deline,
H. -G. Florén,
S. G. Sousa,
V. Bourrier,
V. Singh,
K. Heng,
A. Strugarek,
D. J. Bower,
N. Jäggi,
L. Carone,
M. Lendl,
K. Jones,
A. V. Oza,
O. D. S. Demangeon,
Y. Alibert,
R. Alonso,
G. Anglada,
J. Asquier,
T. Bárczy
, et al. (65 additional authors not shown)
Abstract:
55 Cnc e is an ultra-short period super-Earth transiting a Sun-like star. Previous observations in the optical range detected a time-variable flux modulation that is phased with the planetary orbital period, whose amplitude is too large to be explained by reflected light and thermal emission alone. The goal of the study is to investigate the origin of the variability and timescale of the phase-cur…
▽ More
55 Cnc e is an ultra-short period super-Earth transiting a Sun-like star. Previous observations in the optical range detected a time-variable flux modulation that is phased with the planetary orbital period, whose amplitude is too large to be explained by reflected light and thermal emission alone. The goal of the study is to investigate the origin of the variability and timescale of the phase-curve modulation in 55 Cnc e. To this end, we used the CHaracterising ExOPlanet Satellite (CHEOPS), whose exquisite photometric precision provides an opportunity to characterise minute changes in the phase curve from one orbit to the next. CHEOPS observed 29 individual visits of 55 Cnc e between March 2020 and February 2022. Based on these observations, we investigated the different processes that could be at the origin of the observed modulation. In particular, we built a toy model to assess whether a circumstellar torus of dust driven by radiation pressure and gravity might match the observed flux variability timescale. We find that the phase-curve amplitude and peak offset of 55 Cnc e do vary between visits. The sublimation timescales of selected dust species reveal that silicates expected in an Earth-like mantle would not survive long enough to explain the observed phase-curve modulation. We find that silicon carbide, quartz, and graphite are plausible candidates for the circumstellar torus composition because their sublimation timescales are long. The extensive CHEOPS observations confirm that the phase-curve amplitude and offset vary in time.We find that dust could provide the grey opacity source required to match the observations. However, the data at hand do not provide evidence that circumstellar material with a variable grain mass per unit area causes the observed variability. Future observations with the James Webb Space Telescope promise exciting insights into this iconic super-Earth.
△ Less
Submitted 27 July, 2023; v1 submitted 12 July, 2023;
originally announced July 2023.
-
New compound and hybrid binding energy sputter model for modeling purposes in agreement with experimental data
Authors:
Noah Jäggi,
Andreas Mutzke,
Herbert Biber,
Johannes Brötzner,
Paul Stefan Szabo,
Friedrich Aumayr,
Peter Wurz,
André Galli
Abstract:
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their envelo** exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experim…
▽ More
Rocky planets and moons experiencing solar wind sputtering are continuously supplying their envelo** exosphere with ejected neutral atoms. To understand the quantity and properties of the ejecta, well established Binary Collision Approximation Monte Carlo codes like TRIM with default settings are used predominantly. Improved models such as SDTrimSP have come forward and together with new experimental data the underlying assumptions have been challenged. We introduce a hybrid model, combining the previous surface binding approach with a new bulk binding model akin to Hofsäss & Stegmaier (2023). In addition, we expand the model implementation by distinguishing between free and bound components sourced from mineral compounds such as oxides or sulfides. The use of oxides and sulfides also enables the correct setting of the mass densities of minerals, which was previously limited to the manual setting of individual atomic densities of elements. All of the energies and densities used are thereby based on tabulated data, so that only minimal user input and no fitting of parameters are required. We found unprecedented agreement between the newly implemented hybrid model and previously published sputter yields for incidence angles up to 45° from surface normal. Good agreement is found for the angular distribution of mass sputtered from enstatite MgSiO$_3$ compared to latest experimental data. Energy distributions recreate trends of experimental data of oxidized metals. Similar trends are to be expected from future mineral experimental data. The model thus serves its purpose of widespread applicability and ease of use for modelers of rocky body exospheres.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
VapoRock: Thermodynamics of vaporized silicate melts for modeling volcanic outgassing and magma ocean atmospheres
Authors:
Aaron S. Wolf,
Noah Jäggi,
Paolo A. Sossi,
Dan J. Bower
Abstract:
Silicate vapors play a key role in planetary evolution, especially dominating early stages of rocky planet formation through outgassed magma ocean atmospheres. Our open-source thermodynamic modeling software "VapoRock" combines the MELTS liquid model (Ghiorso et al., 1995) with gas-species properties from multiple thermochemistry tables (e.g., Chase et al., 1998). VapoRock calculates the partial p…
▽ More
Silicate vapors play a key role in planetary evolution, especially dominating early stages of rocky planet formation through outgassed magma ocean atmospheres. Our open-source thermodynamic modeling software "VapoRock" combines the MELTS liquid model (Ghiorso et al., 1995) with gas-species properties from multiple thermochemistry tables (e.g., Chase et al., 1998). VapoRock calculates the partial pressures of 34 gaseous species in equilibrium with magmatic liquid in the system Si-Mg-Fe-Al-Ca-Na-K-Ti-Cr-O at desired temperatures and oxygen fugacities (fO2, or partial pressure of O2). Comparison with experiments shows that pressures and melt-oxide activities (which vary over many orders of magnitude) are reproduced to within a factor of ~3, consistent with measurement uncertainties. We also benchmark the model against a wide selection of igneous rock compositions including bulk silicate Earth, predicting elemental vapor abundances that are comparable (Na, Ca, & Al) or more realistic (K, Si, Mg, Fe, & Ti) than those of the closed-source MAGMA code (with maximum deviations by factors of 10-300 for K & Si). Vapor abundances depend critically on the activities of liquid components. The MELTS model underpinning VapoRock was calibrated and extensively tested on natural igneous liquids. In contrast, MAGMA's liquid model assumes ideal mixtures of a limited set of chemically simplified pseudo-species, which only roughly approximates the non-ideal compositional interactions typical of many-component natural silicate melts. Finally, we explore how relative abundances of SiO and SiO2 provide a spectroscopically measurable proxy for oxygen fugacity in devolatilized exoplanetary atmospheres, potentially constraining fO2 in outgassed exoplanetary mantles.
△ Less
Submitted 20 December, 2022; v1 submitted 19 August, 2022;
originally announced August 2022.
-
Evolution of Mercury's Earliest Atmosphere
Authors:
Noah Jäggi,
Diana Gamborino,
Dan J. Bower,
Paolo A. Sossi,
Aaron S. Wolf,
Apurva V. Oza,
Audrey Vorburger,
André Galli,
Peter Wurz
Abstract:
MESSENGER observations suggest a magma ocean formed on proto-Mercury, during which evaporation of metals and outgassing of C- and H-bearing volatiles produced an early atmosphere. Atmospheric escape subsequently occurred by plasma heating, photoevaporation, Jeans escape, and photoionization. To quantify atmospheric loss, we combine constraints on the lifetime of surficial melt, melt composition, a…
▽ More
MESSENGER observations suggest a magma ocean formed on proto-Mercury, during which evaporation of metals and outgassing of C- and H-bearing volatiles produced an early atmosphere. Atmospheric escape subsequently occurred by plasma heating, photoevaporation, Jeans escape, and photoionization. To quantify atmospheric loss, we combine constraints on the lifetime of surficial melt, melt composition, and atmospheric composition. Consideration of two initial Mercury sizes and four magma ocean compositions determine the atmospheric speciation at a given surface temperature. A coupled interior-atmosphere model determines the cooling rate and therefore the lifetime of surficial melt. Combining the melt lifetime and escape flux calculations provide estimates for the total mass loss from early Mercury. Loss rates by Jeans escape are negligible. Plasma heating and photoionization are limited by homopause diffusion rates of $\sim10^{6}$ kg/s. Loss by photoevaporation depends on the timing of Mercury formation and assumed heating efficiency and ranges from $\sim10^{6.6}$ to $\sim10^{9.6}$ kg/s. The material for photoevaporation is sourced from below the homopause and is therefore energy-limited rather than diffusion-limited. The timescale for efficient interior-atmosphere chemical exchange is less than ten thousand years. Therefore, escape processes only account for an equivalent loss of less than 2.3 km of crust ($0.3\%$ of Mercury's mass). Accordingly, $\leq0.02\%$ of the total mass of H$_2$O and Na is lost. Therefore, cumulative loss cannot significantly modify Mercury's bulk mantle composition during the magma ocean stage. Mercury's high core:mantle ratio and volatile-rich surface may instead reflect chemical variations in its building blocks resulting from its solar-proximal accretion environment.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Cometary dust analogues for physics experiments
Authors:
A. Lethuillier,
C. Feller,
E. Kaufmann,
P. Becerra,
N. Hänni,
R. Diethelm,
C. Kreuzig,
B. Gundlach,
J. Blum,
A. Pommerol,
G. Kargl,
E. Kührt,
H. Capelo,
D. Haack,
X. Zhang,
J. Knollenberg,
N. S. Molinski,
T. Gilke,
H. Sierks,
P. Tiefenbacher,
C. Güttler,
K. A. Otto,
D. Bischoff,
M. Schweighart,
A. Hagermann
, et al. (1 additional authors not shown)
Abstract:
The CoPhyLab (Cometary Physics Laboratory) project is designed to study the physics of comets through a series of earth-based experiments. For these experiments, a dust analogue was created with physical properties comparable to those of the non-volatile dust found on comets. This "CoPhyLab dust" is planned to be mixed with water and CO$_2$ ice and placed under cometary conditions in vacuum chambe…
▽ More
The CoPhyLab (Cometary Physics Laboratory) project is designed to study the physics of comets through a series of earth-based experiments. For these experiments, a dust analogue was created with physical properties comparable to those of the non-volatile dust found on comets. This "CoPhyLab dust" is planned to be mixed with water and CO$_2$ ice and placed under cometary conditions in vacuum chambers to study the physical processes taking place on the nuclei of comets. In order to develop this dust analogue, we mixed two components representative for the non-volatile materials present in cometary nuclei. We chose silica dust as representative for the mineral phase and charcoal for the organic phase, which also acts as a darkening agent. In this paper, we provide an overview of known cometary analogues before presenting measurements of eight physical properties of different mixtures of the two materials and a comparison of these measurements with known cometary values. The physical properties of interest are: particle size, density, gas permeability, spectrophotometry, mechanical, thermal and electrical properties. We found that the analogue dust that matches the highest number of physical properties of cometary materials consists of a mixture of either 60\%/40\% or 70\%/30\% of silica dust/charcoal by mass. These best-fit dust analogue will be used in future CoPhyLab experiments.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Hybridization gap in the heavy-fermion compound UPd$_2$Al$_3$ via quasiparticle scattering spectroscopy
Authors:
N. K. Jaggi,
O. Mehio,
M. Dwyer,
L. H. Greene,
R. E. Baumbach,
P. H. Tobash,
E. D. Bauer,
J. D. Thompson,
W. K. Park
Abstract:
We present results from point-contact spectroscopy of the antiferromagnetic heavy-fermion superconductor UPd$_2$Al$_3$: conductance spectra are taken from single crystals with two major surface orientations as a function of temperature and magnetic field, and analyzed using a theory of co-tunneling into an Anderson lattice. Spectroscopic signatures are clearly identified including the distinct asy…
▽ More
We present results from point-contact spectroscopy of the antiferromagnetic heavy-fermion superconductor UPd$_2$Al$_3$: conductance spectra are taken from single crystals with two major surface orientations as a function of temperature and magnetic field, and analyzed using a theory of co-tunneling into an Anderson lattice. Spectroscopic signatures are clearly identified including the distinct asymmetric double-peak structure arising from the opening of a hybridization gap when a coherent heavy Fermi liquid is formed. Both the hybridization gap, found to be 7.2 $\pm$ 0.3 meV at 4 K, and the conductance enhancement above a flat background decrease upon increasing temperature. While the hybridization gap is extrapolated to remain finite up to $\sim$28 K, close to the temperature around which the magnetic susceptibility displays a broad peak, the conductance enhancement vanishes at $\sim$18 K, slightly above the antiferromagnetic transition temperature ($T_\textrm{N}$ $\approx$ 14 K). This rapid decrease of the conductance enhancement is understood as a consequence of the junction drifting away from the ballistic regime due to increased scattering off magnons associated with the localized U 5$f$ electrons. This shows that while the hybridization gap opening is not directly associated with the antiferromagnetic ordering, its visibility in the conductance is greatly affected by the temperature-dependent magnetic excitations. Our findings are not only consistent with the 5$f$ dual-nature picture in the literature but also shed new light on the interplay between the itinerant and localized electrons in UPd$_2$Al$_3$.
△ Less
Submitted 2 May, 2017; v1 submitted 26 October, 2016;
originally announced October 2016.