-
Revealing Polytypism in 2D Boron Nitride with UV Photoluminescence
Authors:
Jakub Iwański,
Krzysztof P. Korona,
Mateusz Tokarczyk,
Grzegorz Kowalski,
Aleksandra K. Dąbrowska,
Piotr Tatarczak,
Izabela Rogala,
Marta Bilska,
Maciej Wójcik,
Sławomir Kret,
Anna Reszka,
Bogdan J. Kowalski,
Song Li,
Anton Pershin,
Adam Gali,
Johannes Binder,
Andrzej Wysmołek
Abstract:
Boron nitride exhibits diverse crystal structures, predominantly a layered arrangement with strong intraplanar covalent bonds and weak interplanar van der Waals bonds. While commonly referred to as hexagonal BN (hBN), the sp$^2$-bonded BN atomic planes can also arrange in other configurations like Bernal (bBN) or rhombohedral (rBN) stacking orders. Variations in the orientation and translation of…
▽ More
Boron nitride exhibits diverse crystal structures, predominantly a layered arrangement with strong intraplanar covalent bonds and weak interplanar van der Waals bonds. While commonly referred to as hexagonal BN (hBN), the sp$^2$-bonded BN atomic planes can also arrange in other configurations like Bernal (bBN) or rhombohedral (rBN) stacking orders. Variations in the orientation and translation of successive atomic layers lead to changes in crystal symmetry, potentially resulting in piezoelectric, pyroelectric or ferroelectric effects. However, distinguishing between different polytypes using conventional methods like X-ray diffraction or Raman spectroscopy presents a significant challenge. In this work, we demonstrate that the optical response of the 4.1 eV defect can serve as an indicator of the polytype. To this end, we study BN samples grown by metalorganic vapor phase epitaxy (MOVPE), which contain different polytypes. The identification of the polytypes was achieved by X-ray diffraction and transmission electron microscopy. Photoluminescence and cathodoluminescence measurements with a high spatial resolution allowed for the deconvolution of the signal into two components from which we can extract a zero-phonon line (ZPL) at 4.096 eV (302.6 nm) for hBN and 4.143 eV (299.2 nm) for rBN. We performed calculations that enable us to identify the defect as a carbon dimer CBCN (C2) and show that the ZPL shift reflects differences in the crystal environment for different polytypes. Furthermore, we demonstrate that different polytypic composition ratios of hBN and rBN can be achieved by MOVPE, which could pave the way for future applications in large-area van der Waals heterostructures.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Manipulating carbon related spin defects in boron nitride by changing the MOCVD growth temperature
Authors:
Jakub Iwański,
Jakub Kierdaszuk,
Arkadiusz Ciesielski,
Johannes Binder,
Aneta Drabińska,
Andrzej Wysmołek
Abstract:
A common solution for precise magnetic field sensing is to employ spin-active defects in semiconductors, with the NV center in diamond as prominent example. However, the three-dimensional nature of diamond limits the obtainable proximity of the defect to the sample. Two-dimensional boron nitride, which can host spin-active defects, can be used to overcome those limitations. In this work, we study…
▽ More
A common solution for precise magnetic field sensing is to employ spin-active defects in semiconductors, with the NV center in diamond as prominent example. However, the three-dimensional nature of diamond limits the obtainable proximity of the defect to the sample. Two-dimensional boron nitride, which can host spin-active defects, can be used to overcome those limitations. In this work, we study spin properties of sp2-bonded boron nitride layers grown using Metal Organic Chemical Vapor Deposition at temperatures ranging from 700 $^\circ$C to 1200 $^\circ$C. With Electron Spin Resonance (ESR) we show that our layers exhibit spin properties, which we ascribe to carbon related defects. Supported by photoluminescence and Fourier-transform infrared spectroscopy, we distinguish three different regimes: (i) growth at low temperatures with no ESR signal, (ii) growth at intermediate temperatures with a strong ESR signal and a large number of spin defects, (iii) growth at high temperatures with a weaker ESR signal and a lower number of spin defects. The observed effects can be further enhanced by an additional annealing step. Our studies demonstrate wafer-scale boron nitride that intrinsically hosts spin defects without any ion or neutron irradiation, which may be employed in spin memories or magnetic field detectors.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Bandgap manipulation of hBN by alloying with aluminum: absorption properties of hexagonal BAlN
Authors:
Jakub Iwański,
Mateusz Tokarczyk,
Aleksandra K. Dąbrowska,
Jan Pawłowski,
Piotr Tatarczak,
Johannes Binder,
Andrzej Wysmołek
Abstract:
The versatile range of applications for two-dimensional (2D) materials has encouraged scientists to further engineer the properties of these materials. This is often accomplished by stacking layered materials into more complex van der Waals heterostructures. A much less popular but technologically promising approach is the alloying of 2D materials with different element compositions. In this work,…
▽ More
The versatile range of applications for two-dimensional (2D) materials has encouraged scientists to further engineer the properties of these materials. This is often accomplished by stacking layered materials into more complex van der Waals heterostructures. A much less popular but technologically promising approach is the alloying of 2D materials with different element compositions. In this work, we demonstrate a first step in manipulating the hBN bandgap in terms of its width and indirect/direct character of the optical transitions. We present a set of aluminum alloyed hexagonal boron nitride (hBAlN) samples that were grown by metal organic vapor phase epitaxy (MOVPE) on 2-inch sapphire substrates with different aluminum concentration. Importantly, the obtained samples revealed a sp$^2$-bonded crystal structure. Optical absorption experiments disclosed two strong peaks in the excitonic spectral range with absorption coefficient $α\sim 10^6$ cm$^{-1}$. Their energies correspond very well with the energies of indirect and direct bandgap transitions in hBN. However, they are slightly redshifted. This observation is in agreement with predictions that alloying with Al leads to a decrease of the bandgap energy. The observation of two absorption peaks can be explained in terms of mixing electronic states in the K and M conduction band valleys, which leads to a significant enhancement of the absorption coefficient for indirect transitions.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
All-BN Distributed Bragg Reflectors Fabricated in a Single MOCVD Process
Authors:
Arkadiusz Ciesielski,
Jakub Iwański,
Piotr Wróbel,
Rafał Bożek,
Sławomir Kret,
Jakub Turczyński,
Johannes Binder,
Krzysztof P. Korona,
Roman Stępniewski,
Andrzej Wysmołek
Abstract:
Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration with other components in the final photonic structure. Here, we demonstrate the fabrication of DBR structures consisting only of undoped boron nitride (BN) lay…
▽ More
Distributed Bragg Reflectors (DBR) are well-established photonic structures that are used in many photonic applications. However, most of the DBRs are based on different materials or require post-process etching which can hinder integration with other components in the final photonic structure. Here, we demonstrate the fabrication of DBR structures consisting only of undoped boron nitride (BN) layers with high refractive index contrast by using Metal-Organic Chemical Vapor Deposition (MOCVD). This has been achieved in a single process, without the need for any post-process etching. The difference in the refractive index of the component BN layers stems from different degrees of porosity of the individual BN layers, which is a direct result of a different growth temperature. The fabricated DBR structures consist of 15.5 pairs of BN layers and exhibit a reflectance of 87+/-1% at the maximum. The wavelength of maximum reflectance can be tuned from 500 nm up to the Infrared Region (IR), by simply adjusting the growth periods of subsequent BN layers. We also demonstrate that the fabricated structures can be used to create an optical microcavity. The fabricated DBRs are very promising candidates for future applications, for example in combination with single-photon emitters in h-BN, which could allow the building of a cavity-based all-BN single-photon source.
△ Less
Submitted 5 June, 2022;
originally announced June 2022.
-
Temperature induced giant shift of phonon energy in epitaxial boron nitride layers
Authors:
Jakub Iwański,
Piotr Tatarczak,
Mateusz Tokarczyk,
Grzegorz Kowalski,
Aleksandra K. Dąbrowska,
Johannes Binder,
Roman Stępniewski,
Andrzej Wysmołek
Abstract:
The recent progress in the growth of large-area boron nitride epilayers opens up new possibilities for future applications. However, it remains largely unclear how weakly attached two-dimensional BN layers interact with their substrate and how their properties are influenced by defects. In this work, we investigate hBN layers grown by Metal Organic Vapor Phase Epitaxy (MOVPE) using Fourier-transfo…
▽ More
The recent progress in the growth of large-area boron nitride epilayers opens up new possibilities for future applications. However, it remains largely unclear how weakly attached two-dimensional BN layers interact with their substrate and how their properties are influenced by defects. In this work, we investigate hBN layers grown by Metal Organic Vapor Phase Epitaxy (MOVPE) using Fourier-transform Infrared (FTIR) spectroscopy in the temperature range of 160-540 K. Our measurements reveal strong differences in the character of layer-substrate interaction for as-grown and delaminated epitaxial layers. A much weaker interaction of as-grown layers is explained by wrinkles formation that reduces strain at the layer-substrate interface, which for layers transferred to other substrates occurs only in a limited temperature range. The most striking result is the observation of a giant increase in the $E_{1u}$ phonon energy of up to $\sim6$ cm$^{-1}$ in a narrow temperature range. We show that the amplitude and temperature range of the anomaly is strongly modified by UV light illumination. The observed giant effect is explained in terms of strain generation resulting from charge redistribution between shallow traps and different defects, which can be interpreted as a result of strong electron-phonon coupling in hBN. The observed narrow temperature range of the anomaly indicates that the effect may be further enhanced for example by electrostrictive effects, expected for sp$^2$ boron nitride.
△ Less
Submitted 28 April, 2022; v1 submitted 27 April, 2022;
originally announced April 2022.
-
Heteroepitaxial growth of high optical quality, wafer-scale van der Waals heterostrucutres
Authors:
Katarzyna Ludwiczak,
Aleksandra Krystyna Dąbrowska,
Johannes Binder,
Mateusz Tokarczyk,
Jakub Iwański,
Bogusława Kurowska,
Jakub Turczyński,
Grzegorz Kowalski,
Rafał Bożek,
Roman Stępniewski,
Wojciech Pacuski,
Andrzej Wysmołek
Abstract:
Transition metal dichalcogenides (TMDs) are materials that can exhibit intriguing optical properties like a change of the bandgap from indirect to direct when being thinned down to a monolayer. Well-resolved narrow excitonic resonances can be observed for such monolayers, however only for materials of sufficient crystalline quality, so far mostly available in the form of micrometer-sized flakes. A…
▽ More
Transition metal dichalcogenides (TMDs) are materials that can exhibit intriguing optical properties like a change of the bandgap from indirect to direct when being thinned down to a monolayer. Well-resolved narrow excitonic resonances can be observed for such monolayers, however only for materials of sufficient crystalline quality, so far mostly available in the form of micrometer-sized flakes. A further significant improvement of optical and electrical properties can be achieved by transferring the TMD on hexagonal boron nitride (hBN). To exploit the full potential of TMDs in future applications, epitaxial techniques have to be developed that not only allow to growlarge-scale, high-quality TMD monolayers, but allow to perform the growth directly on large-scale epitaxial hBN. In this work we address this problem and demonstrate that MoSe2 of high optical quality can be directly grown on epitaxial hBN on an entire two-inch wafer. We developed a combined growth theme for which hBN is first synthesized at high temperature by Metal Organic Vapor Phase Epitaxy (MOVPE) and as a second step MoSe2 is deposited on top by Molecular Beam Epitaxy (MBE) at much lower temperatures. We show that this structure exhibits excellent optical properties, manifested by narrow excitonic lines in the photoluminescence spectra. Moreover, the material is homogeneous on the area of the whole two-inch wafer, with only +/-0.14 meV deviation of excitonic energy. Our mixed growth technique may guide the way for future large-scale production of high quality TMD/hBN heterostructures.
△ Less
Submitted 4 September, 2021;
originally announced September 2021.