-
Relativistic jet ejections from slim disks
Authors:
Hajime Inoue
Abstract:
An ejection mechanism of relativistic jets from slim disks is studied. Since the radiation pressure is dominant in the slim disk, radiative energy flow arises along the pressure gradient in the vertical direction. The divergence of the radiative flux tells us that the radiative energy flow from a bottom layer near the equatorial plane is absorbed by another layer upper than the boundary surface. T…
▽ More
An ejection mechanism of relativistic jets from slim disks is studied. Since the radiation pressure is dominant in the slim disk, radiative energy flow arises along the pressure gradient in the vertical direction. The divergence of the radiative flux tells us that the radiative energy flow from a bottom layer near the equatorial plane is absorbed by another layer upper than the boundary surface. The absorbed energy accumulates in the upper layer as the matter advances inward and calculations show that the specific energy of the flow in the upper layer can be as large as $\sim c^{2}$ near the black hole when the accretion rate through the upper layer is relatively low. Since the specific energy $\sim c^{2}$ is much larger than the gravitational energy, the height of the upper layer could significantly increase then. Hence, the innermost part of the upper layer after almost all the angular momentum has been removed could have a much larger height than the black hole size and collide with one another around the central axis of the disk, bouncing back from the axis as simultaneously expanding along the axis. The flow is expected to go outward along the central axis and to become supersonic due to the cross-section-change of the flow, getting the relativistic jets finally.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
The Coexistence of Infection Spread Patterns in the Global Dynamics of COVID-19 Dissemination
Authors:
Hiroyasu Inoue,
Wataru Souma,
Yoshi Fujiwara
Abstract:
The novel coronavirus SARS-CoV-2, commonly referred to as COVID-19, triggered the global pandemic. Although the nature of the international spread of infection is an important issue, extracting diffusion networks from observations is challenging because of its inherent complexity. In this paper, we investigate the process of infection worldwide, including time delays, based on global infection cas…
▽ More
The novel coronavirus SARS-CoV-2, commonly referred to as COVID-19, triggered the global pandemic. Although the nature of the international spread of infection is an important issue, extracting diffusion networks from observations is challenging because of its inherent complexity. In this paper, we investigate the process of infection worldwide, including time delays, based on global infection case data collected from January 3, 2020 to December 31, 2022. We approach the data with a complex Hilbert principal component analysis, which can consider not only the concurrent relationships between elements, but also the leading and lagging relationships. Then, we examine the interactions among countries by considering six factors: geography, population, GDP, stringency of countermeasures, vaccination rates, and government type. The results show two primary trends occurring in 2020 and in 2021-2022 and they interchange with each other. Specifically, European, highly populated, and democratic countries, i.e., countries with high mobility rates, show leading trends in 2020. In contrast, African and nondemocratic countries show leading trends in 2021-2022, followed by countries with high vaccination rates and advanced countermeasures. The results reveal that, although factors that increase infection risk lead to certain trends at the beginning of the pandemic, these trends dynamically changes over time due to socioeconomic factors, especially the introduction of countermeasures. The findings suggest that international efforts to promote countermeasures in develo** countries can contribute to pandemic containment.
△ Less
Submitted 10 January, 2024; v1 submitted 6 January, 2024;
originally announced January 2024.
-
Glass-like thermal conductivity and narrow insulating gap of EuTiO$_3$
Authors:
Alexandre Jaoui,
Shan Jiang,
Xiaokang Li,
Yasuhide Tomioka,
Isao H. Inoue,
Johannes Engelmayer,
Rohit Sharma,
Lara Pätzold,
Thomas Lorenz,
Benoît Fauqué,
Kamran Behnia
Abstract:
Crystals and glasses differ by the amplitude and the temperature dependence of their thermal conductivity. However, there are crystals known to display glass-like thermal conductivity. Here, we show that EuTiO$_3$, a quantum paraelectric known to order antiferromagnetically at 5.5 K, is one such system. The temperature dependence of resistivity and Seebeck coefficient yield an insulating band gap…
▽ More
Crystals and glasses differ by the amplitude and the temperature dependence of their thermal conductivity. However, there are crystals known to display glass-like thermal conductivity. Here, we show that EuTiO$_3$, a quantum paraelectric known to order antiferromagnetically at 5.5 K, is one such system. The temperature dependence of resistivity and Seebeck coefficient yield an insulating band gap of $\sim 0.22$ eV. Thermal conductivity is drastically reduced. Its amplitude and temperature dependence are akin to what is seen in amorphous silica. Comparison with non-magnetic perovskite solids, SrTiO$_3$, KTaO$_3$, and EuCoO$_3$, shows that what impedes heat transport are $4f$ spins at Eu$^{2+}$ sites, which couple to phonons well above the ordering temperature. Thus, in this case, superexchange and valence fluctuations, not magnetic frustration, are the drivers of the glass-like thermal conductivity.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Transient jet ejections associated with limit-cycle behaviors in the very high state of black hole binaries
Authors:
Hajime Inoue
Abstract:
Ejection mechanism of transient relativistic jets from black hole binaries is studied. Based on the observations of the limit-cycle behaviors of the superluminal jet source, GRS 1915+105, we infer that the transient jet ejections could happen just after the slim disk emerging from the standard disk at some distance runs over the standard disk and reaches the vicinity of the central black hole. The…
▽ More
Ejection mechanism of transient relativistic jets from black hole binaries is studied. Based on the observations of the limit-cycle behaviors of the superluminal jet source, GRS 1915+105, we infer that the transient jet ejections could happen just after the slim disk emerging from the standard disk at some distance runs over the standard disk and reaches the vicinity of the central black hole. The standard disk releases about a half of the gravitational energy in the course of the accretion, but the released radiative energy could be absorbed by the optically thick slim disk covering the standard disk in this situation. Then, since the inward motion of the slim disk is much faster than that of the standard disk, a quantity of energy released by an amount of gas in the standard disk is received by the much smaller amount of gas in the slim disk. As the result, the energy per mass received by the slim disk is expected to be largely amplified and is estimated to get highly relativistic. Since the energy is much larger than the gravitational energy, the height of the slim disk could significantly increase. Hence, the innermost part of the slim disk from which almost all the angular momentum has been transferred outward could have a much larger height than the black hole size and collide with one another around the central axis of the disk, turning to an outward flow along the axis normal to the disk plane. The flow in this direction can be approximated to be that through the de Laval nozzle and could become supersonic near the distance where the flow has the smallest cross section.
△ Less
Submitted 21 June, 2023; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Bandwidth Control and Symmetry Breaking in a Mott-Hubbard Correlated Metal
Authors:
Lishai Shoham,
Maria Baskin,
Tom Tiwald,
Guy Ankonina,
Myung-Geun Han,
Anna Zakharova,
Shaked Caspi,
Shay Joseph,
Yimei Zhu,
Isao H. Inoue,
Cinthia Piamonteze,
Marcelo J. Rozenberg,
Lior Kornblum
Abstract:
In Mott materials strong electron correlation yields a spectrum of complex electronic structures. Recent synthesis advancements open realistic opportunities for harnessing Mott physics to design transformative devices. However, a major bottleneck in realizing such devices remains the lack of control over the electron correlation strength. This stems from the complexity of the electronic structure,…
▽ More
In Mott materials strong electron correlation yields a spectrum of complex electronic structures. Recent synthesis advancements open realistic opportunities for harnessing Mott physics to design transformative devices. However, a major bottleneck in realizing such devices remains the lack of control over the electron correlation strength. This stems from the complexity of the electronic structure, which often veils the basic mechanisms underlying the correlation strength. Here, we present control of the correlation strength by tuning the degree of orbital overlap using picometer-scale lattice engineering. We illustrate how bandwidth control and concurrent symmetry breaking can govern the electronic structure of a correlated $SrVO_3$ model system. We show how tensile and compressive biaxial strain oppositely affect the $SrVO_3$ in-plane and out-of-plane orbital occupancy, resulting in the partial alleviation of the orbital degeneracy. We derive and explain the spectral weight redistribution under strain and illustrate how high tensile strain drives the system towards a Mott insulating state. Implementation of such concepts will drive correlated electron phenomena closer towards new solid state devices and circuits. These findings therefore pave the way for understanding and controlling electron correlation in a broad range of functional materials, driving this powerful resource for novel electronics closer towards practical realization.
△ Less
Submitted 21 April, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Steady jet ejections from the innermost region of advection-dominated accretion flow around a black hole
Authors:
Hajime Inoue
Abstract:
We study ejection mechanisms for two kinds of steady jets: one observed from black hole binaries in the low/hard state and the other from SS433. The specific energy of the ejected gas is required to be positive for the jets to get to infinity, while that of the accreted gas is naively considered to be negative at the outermost boundary of the accretion flow. To reconcile the opposite sign of the s…
▽ More
We study ejection mechanisms for two kinds of steady jets: one observed from black hole binaries in the low/hard state and the other from SS433. The specific energy of the ejected gas is required to be positive for the jets to get to infinity, while that of the accreted gas is naively considered to be negative at the outermost boundary of the accretion flow. To reconcile the opposite sign of the specific energies, we propose a situation where two layers exist in the accretion flow and one layer receives energy from the other sufficiently for the specific energy to be positive. For the steady jets in the low/hard state, the accretion ring at the outermost end of the accretion flow is considered to yield two-layer flow in which a geometrically thick ADAF sandwiches a geometrically thin accretion disk and the thin disk is supposed to turn to another ADAF on the inner side. The energy transfer is expected to occur through turbulent mixing between the two layers and the upper layer is discussed to have the positive specific energy large enough for the terminal velocity to be $\sim$ 0.1 $c$. For the steady jets from SS433, a slim disk is argued to separate into two stratified layers due to the photon diffusion in the direction perpendicular to the equatorial plane under the advection dominated situation. In this case, the specific energy of the upper layer is expected to be positive such that the terminal velocity exceeds 0.2 $c$. The jet ejection process near the black hole is investigated commonly to both the two-layer cases and predicts the jet opening angle becomes as small as 2$^{\circ}$.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Scattering theory and an index theorem on the radial part of SL(2,R)
Authors:
H. Inoue,
S. Richard
Abstract:
We present the spectral and scattering theory of the Casimir operator acting on the radial part of SL(2,R). After a suitable decomposition, these investigations consist in studying a family of differential operators acting on the half-line. For these operators, explicit expressions can be found for the resolvent, for the spectral density, and for the Moeller wave operators, in terms of the Gauss h…
▽ More
We present the spectral and scattering theory of the Casimir operator acting on the radial part of SL(2,R). After a suitable decomposition, these investigations consist in studying a family of differential operators acting on the half-line. For these operators, explicit expressions can be found for the resolvent, for the spectral density, and for the Moeller wave operators, in terms of the Gauss hypergeometric function. An index theorem is also introduced and discussed. The resulting equality links various asymptotic behaviors of the hypergeometric function.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
CMOS-based area-and-power-efficient neuron and synapse circuits for time-domain analog spiking neural networks
Authors:
Xiangyu Chen,
Zolboo Byambadorj,
Takeaki Yajima,
Hisashi Inoue,
Isao H. Inoue,
Tetsuya Iizuka
Abstract:
Conventional neural structures tend to communicate through analog quantities such as currents or voltages, however, as CMOS devices shrink and supply voltages decrease, the dynamic range of voltage/current-domain analog circuits becomes narrower, the available margin becomes smaller, and noise immunity decreases. More than that, the use of operational amplifiers (op-amps) and continuous-time or cl…
▽ More
Conventional neural structures tend to communicate through analog quantities such as currents or voltages, however, as CMOS devices shrink and supply voltages decrease, the dynamic range of voltage/current-domain analog circuits becomes narrower, the available margin becomes smaller, and noise immunity decreases. More than that, the use of operational amplifiers (op-amps) and continuous-time or clocked comparators in conventional designs leads to high energy consumption and large chip area, which would be detrimental to building spiking neural networks. In view of this, we propose a neural structure for generating and transmitting time-domain signals, including a neuron module, a synapse module, and two weight modules. The proposed neural structure is driven by a leakage current of MOS transistors and uses an inverter-based comparator to realize a firing function, thus providing higher energy and area efficiency compared to conventional designs. The proposed neural structure is fabricated using TSMC 65 nm CMOS technology. The proposed neuron and synapse occupy the area of 127 μm^{ 2} and 231 μm^{ 2}, respectively, while achieving millisecond time constants. Actual chip measurements show that the proposed structure implements the temporal signal communication function with millisecond time constants, which is a critical step toward hardware reservoir computing for human-computer interaction. Simulation results of the spiking-neural network for reservoir computing with the behavioral model of the proposed neural structure demonstrate the learning function.
△ Less
Submitted 2 February, 2023; v1 submitted 25 August, 2022;
originally announced August 2022.
-
Mass flows and their behaviors in the SS433--W50 system
Authors:
Hajime Inoue
Abstract:
We propose the scenario to interpret the overall observational features of the SS433--W50 system. The most unique features of SS433 are the presence of the precessing, mildly relativistic jets and the obscuration of the central engine, which are considered to be due to a supercritical accretion on to the central compact object. The jets are likely to be ejected from the innermost region of the acc…
▽ More
We propose the scenario to interpret the overall observational features of the SS433--W50 system. The most unique features of SS433 are the presence of the precessing, mildly relativistic jets and the obscuration of the central engine, which are considered to be due to a supercritical accretion on to the central compact object. The jets are likely to be ejected from the innermost region of the accretion flow. The concept of the accretion ring (Inoue 2021, PASJ, 73,795) is applied to the outer boundary of the accretion flow and the ring is supposed to have a precession. The accretion ring is expected to extend a two-layer outflow of a thin excretion disk and a thick excretion flow, as well as the accretion flow. The thin excretion disk is discussed to eventually form the optically thick excretion belt along the Roche lobe around the compact object, contributing to the obscuration of the central engine. The thick excretion flow is likely to turn to the supersonic wind (disk wind) with the terminal velocity of $\sim 10^{8}$ cm s$^{-1}$ and to collide with the SNR matter at the distance of $\sim 10^{18}$ cm. The interactions of the jets with the disk wind are considered to cause the features of the jets observed at the distances of 10$^{14} \sim 10^{15}$ cm and $\sim 10^{17}$ cm. Finally, it is discussed that the jets are braked by the SNR matter at the distance of $\sim$10 pc and the momentum carried by the jet is transferred to the SNR matter shoved by the jet. The SNR matter pushed to the inside of the precession cone is expected to gather along the cone axis and to form the elongated structures in the east and west directions from the main W50 structure.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Superconductivity enhancement in polar metal regions of Sr$_{0.95}$Ba$_{0.05}$TiO$_3$ and Sr$_{0.985}$Ca$_{0.015}$TiO$_3$ revealed by the systematic Nb do**
Authors:
Yasuhide Tomioka,
Naoki Shirakawa,
Isao H. Inoue
Abstract:
Two different ferroelectric materials, Sr$_{0.95}$Ba$_{0.05}$TiO$_3$ and Sr$_{0.985}$Ca$_{0.015}$TiO$_3$, can be turned into polar metals with broken centrosymmetry via electron do**. Systematic substitution of Nb$^{5+}$ for Ti$^{4+}$ has revealed that these polar metals both commonly show a simple superconducting dome with a single convex shape. Interestingly, the superconducting transition tem…
▽ More
Two different ferroelectric materials, Sr$_{0.95}$Ba$_{0.05}$TiO$_3$ and Sr$_{0.985}$Ca$_{0.015}$TiO$_3$, can be turned into polar metals with broken centrosymmetry via electron do**. Systematic substitution of Nb$^{5+}$ for Ti$^{4+}$ has revealed that these polar metals both commonly show a simple superconducting dome with a single convex shape. Interestingly, the superconducting transition temperature $T_\mathrm{c}$ is enhanced more strongly in these polar metals when compared with the nonpolar matrix Sr(Ti,Nb)O$_3$. The maximum $T_\mathrm{c}$ reaches 0.75K, which is the highest reported value among the SrTiO$_3$-based families to date. However, the $T_\mathrm{c}$ enhancement is unexpectedly lower within the vicinity of the putative ferroelectric quantum critical point. The enhancement then becomes much more prominent at locations further inside the dilute carrier-density region, where the screening is less effective. These results suggest that centrosymmetry breaking, i.e., the ferroelectric nature, does not kill the superconductivity. Instead, it enhances the superconductivity directly, despite the absence of strong quantum fluctuations.
△ Less
Submitted 1 December, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Origin of cool cores, cold fronts and spiral structures in cool core clusters of galaxies
Authors:
Hajime Inoue
Abstract:
We consider a situation in which a brightest cluster galaxy (BCG) moves in ambient hot gas in the central region of a cool core cluster of galaxies, following the study by Inoue (2014, PASJ, 66, 60). In the rest frame of the BCG, the hot gas is supposed to flow toward the BCG in parallel from a sufficiently large distance. Then, it is expected that only the gas flowing with the impact parameter le…
▽ More
We consider a situation in which a brightest cluster galaxy (BCG) moves in ambient hot gas in the central region of a cool core cluster of galaxies, following the study by Inoue (2014, PASJ, 66, 60). In the rest frame of the BCG, the hot gas is supposed to flow toward the BCG in parallel from a sufficiently large distance. Then, it is expected that only the gas flowing with the impact parameter less than a critical value is trapped by the gravitation field of the BCG because of the efficient radiative cooling, getting a cooling flow, and that the remaining outer gas can get over the potential well. In such a circumstance, we can draw the following picture: A boundary layer between the out-flowing gas and the trapped gas arises around the stagnation point at the back side of the BCG. Since the boundary temperature is so low as to be X-ray dim, the boundary could be observed as the cold front in X-rays. The trapped gas once stagnates on the inner side of the boundary and starts in-falling toward the BCG. Since the wandering motion of the BCG is likely to have a rotational component, the Coriolis force induces a rotational motion in the in-falling flow from the stagnation place to the BCG, forming a spiral structure around the BCG. The spiraling flow turns the BCG on the up stream side of the main flow from the far outside, and arises another boundary layer having contact discontinuity with the main hot gas flow. These pictures well reproduce the observed features such as cool cores, cold fronts, and spiral structures. It can also be resolved how the cooling flow is suppressed from what the cooling flow hypothesis predicts, without any heating mechanism.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Multi-step LRU: SIMD-based Cache Replacement for Lower Overhead and Higher Precision
Authors:
Hiroshi Inoue
Abstract:
A key-value cache is a key component of many services to provide low-latency and high-throughput data accesses to a huge amount of data. To improve the end-to-end performance of such services, a key-value cache must achieve a high cache hit ratio with high throughput. In this paper, we propose a new cache replacement algorithm, multi-step LRU, which achieves high throughput by efficiently exploiti…
▽ More
A key-value cache is a key component of many services to provide low-latency and high-throughput data accesses to a huge amount of data. To improve the end-to-end performance of such services, a key-value cache must achieve a high cache hit ratio with high throughput. In this paper, we propose a new cache replacement algorithm, multi-step LRU, which achieves high throughput by efficiently exploiting SIMD instructions without using per-item additional memory (LRU metadata) to record information such as the last access timestamp. For a small set of items that can fit within a vector register, SIMD-based LRU management without LRU metadata is known (in-vector LRU). It remembers the access history by reordering items in one vector using vector shuffle instruction. In-vector LRU alone cannot be used for a caching system since it can manage only few items. Set-associative cache is a straightforward way to build a large cache using in-vector LRU as a building block. However, a naive set-associative cache based on in-vector LRU has a poorer cache hit ratio than the original LRU although it can achieve a high throughput. Our multi-step LRU enhances naive set-associative cache based on in-vector LRU for improving cache accuracy by taking both access frequency and access recency of items into account while kee** the efficiency by SIMD instructions. Our results indicate that multi-step LRU outperforms the original LRU and GCLOCK algorithms in terms of both execution speed and cache hit ratio. Multi-step LRU improves the cache hit ratios over the original LRU by implicitly taking access frequency of items as well as access recency into account. The cache hit ratios of multi-step LRU are similar to those of ARC, which achieves a higher a cache hit ratio in a tradeoff for using more LRU metadata.
△ Less
Submitted 18 December, 2021;
originally announced December 2021.
-
Accretion environments of active galactic nuclei
Authors:
Hajime Inoue
Abstract:
We study accretion environments of active galactic nuclei when a super-massive black hole wanders in a circum-nuclear region and passes through an interstellar medium there. It is expected that a Bondi-Hoyle-Lyttleton type accretion of the interstellar matter takes place and an accretion stream of matter trapped by the black hole gravitational field appears from a tail shock region. Since the trap…
▽ More
We study accretion environments of active galactic nuclei when a super-massive black hole wanders in a circum-nuclear region and passes through an interstellar medium there. It is expected that a Bondi-Hoyle-Lyttleton type accretion of the interstellar matter takes place and an accretion stream of matter trapped by the black hole gravitational field appears from a tail shock region. Since the trapped matter is likely to have a certain amount of specific angular momentum, the accretion stream eventually forms an accretion ring around the black hole. According to the recent study, the accretion ring consists of a thick envelope and a thin core, and angular momenta are transfered from the inner side facing to the black hole to the opposite side respectively in the envelope and the core. As a result, a thick accretion flow and a thick excretion flow extend from the envelope, and a thin accretion disk and a thin excretion disk do from the core. The thin excretion disk is predicted to terminate at some distance forming an excretion ring, while the thick excretion flow is considered to become a super-sonic wind flowing to the infinity. The thick excretion flow from the accretion ring is expected to interact with the accretion stream toward the accretion ring and to be collimated to bi-polar cones. These pictures provide a likely guide line to interpret the overall accretion environments suggested from observations.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Low-density superconductivity in SrTiO$_3$ bounded by the adiabatic criterion
Authors:
Hyeok Yoon,
Adrian G. Swartz,
Shannon P. Harvey,
Hisashi Inoue,
Yasuyuki Hikita,
Yue Yu,
Suk Bum Chung,
Srinivas Raghu,
Harold Y. Hwang
Abstract:
SrTiO$_3$ exhibits superconductivity for carrier densities $10^{19}-10^{21}$ cm$^{-3}$. Across this range, the Fermi level traverses a number of vibrational modes in the system, making it ideal for studying dilute superconductivity. We use high-resolution planar-tunneling spectroscopy to probe chemically-doped SrTiO$_3$ across the superconducting dome. The over-doped superconducting boundary align…
▽ More
SrTiO$_3$ exhibits superconductivity for carrier densities $10^{19}-10^{21}$ cm$^{-3}$. Across this range, the Fermi level traverses a number of vibrational modes in the system, making it ideal for studying dilute superconductivity. We use high-resolution planar-tunneling spectroscopy to probe chemically-doped SrTiO$_3$ across the superconducting dome. The over-doped superconducting boundary aligns, with surprising precision, to the Fermi energy crossing the Debye energy. Superconductivity emerges with decreasing density, maintaining throughout the Bardeen-Cooper-Schrieffer (BCS) gap to transition-temperature ratio, despite being in the anti-adiabatic regime. At lowest superconducting densities, the lone remaining adiabatic phonon van Hove singularity is the soft transverse-optic mode, associated with the ferroelectric instability. We suggest a scenario for pairing mediated by this mode in the presence of spin-orbit coupling, which naturally accounts for the superconducting dome and BCS ratio.
△ Less
Submitted 20 June, 2021;
originally announced June 2021.
-
Properties of the accretion ring in an X-ray binary, and accretion and excretion two-layer flows from it
Authors:
Hajime Inoue
Abstract:
We study properties of an accretion ring in a steady mass flow from a companion star to a compact object in an X-ray binary. The accretion ring is a place where matter inflowing from a companion star sojourns for a while to bifurcate to accretion and excretion flows due to angular momentum transfer in it. The matter in the accretion ring rotates along the Keplerian circular orbit determined by the…
▽ More
We study properties of an accretion ring in a steady mass flow from a companion star to a compact object in an X-ray binary. The accretion ring is a place where matter inflowing from a companion star sojourns for a while to bifurcate to accretion and excretion flows due to angular momentum transfer in it. The matter in the accretion ring rotates along the Keplerian circular orbit determined by the intrinsic specific angular momentum of the inflowing matter and forms a thick ring-envelope. Two internal flows are expected to appear in the thick envelope. One is a mass spreading flow bifurcating to a thick accretion flow and a thick excretion flow, as a result of the angular momentum transfer within the ring-envelope. The other is a cooling flow toward the envelope center governed by radiative cooling under an effect of X-ray irradiation. This cooling flow eventually forms a core in the torus, from which a thin accretion disk and a thin excretion disk spread out as a result of the angular momentum transfer there again. Evaluating and comparing the time scales for the two internal flows, the accretion ring is shown to generally originate a two-layer accretion flow in which a thin accretion disk is sandwiched by a thick accretion flow, unless the accretion rate is very low. Properties of the thin excretion disk and the thick excretion flow are also investigated. The thin excretion disk is expected to terminate at a distance 4 times as large as the accretion ring radius and to form another ring there, unless tidal effects from the companion star exist. The thick excretion flow is, on the other hand, likely to turn to a super-sonic wind-flow reaching the infinity.
△ Less
Submitted 13 May, 2021;
originally announced May 2021.
-
Wandering of the central black hole in a galactic nucleus and correlation of the black hole mass with the bulge mass
Authors:
Hajime Inoue
Abstract:
We investigate a mechanism for a super-massive black hole at the center of a galaxy to wander in the nucleus region. A situation is supposed in which the central black hole tends to move by the gravitational attractions from the nearby molecular clouds in a nuclear bulge but is braked via the dynamical frictions by the ambient stars there. We estimate the approximate kinetic energy of the black ho…
▽ More
We investigate a mechanism for a super-massive black hole at the center of a galaxy to wander in the nucleus region. A situation is supposed in which the central black hole tends to move by the gravitational attractions from the nearby molecular clouds in a nuclear bulge but is braked via the dynamical frictions by the ambient stars there. We estimate the approximate kinetic energy of the black hole in an equilibrium between the energy gain rate through the gravitational attractions and the energy loss rate through the dynamical frictions, in a nuclear bulge composed of a nuclear stellar disk and a nuclear stellar cluster as observed from our Galaxy. The wandering distance of the black hole in the gravitational potential of the nuclear bulge is evaluated to get as large as several 10 pc, when the black hole mass is relatively small. The distance, however, shrinks as the black hole mass increases and the equilibrium solution between the energy gain and loss disappears when the black hole mass exceeds an upper limit. As a result, we can expect the following scenario for the evolution of the black hole mass: When the black hole mass is smaller than the upper limit, mass accretion of the interstellar matter in the circum-nuclear region, causing the AGN activities, makes the black hole mass larger. However, when the mass gets to the upper limit, the black hole loses the balancing force against the dynamical friction and starts spiraling downward to the gravity center. From simple parameter scaling, the upper mass limit of the black hole is found to be proportional to the bulge mass and this could explain the observed correlation of the black hole mass with the bulge mass.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
-
Lockdowns need geographic coordination because of propagation of economic effects through supply chains
Authors:
Hiroyasu Inoue,
Yohsuke Murase,
Yasuyuki Todo
Abstract:
In order to prevent the spread of COVID-19, governments have often required regional or national lockdowns, which have caused extensive economic stagnation over broad areas as the shock of the lockdowns has diffused to other regions through supply chains. Using supply-chain data for 1.6 million firms in Japan, this study examines how governments can mitigate these economic losses when they are obl…
▽ More
In order to prevent the spread of COVID-19, governments have often required regional or national lockdowns, which have caused extensive economic stagnation over broad areas as the shock of the lockdowns has diffused to other regions through supply chains. Using supply-chain data for 1.6 million firms in Japan, this study examines how governments can mitigate these economic losses when they are obliged to implement lockdowns. Through tests of all combinations of two-region lockdowns, we find that coordinated, i.e., simultaneous, lockdowns yield smaller GDP losses than uncoordinated lockdowns. Furthermore, we test practical scenarios in which Japan's 47 regions impose lockdowns over three months and find that GDP losses are lower if nationwide lockdowns are coordinated than if they are uncoordinated.
△ Less
Submitted 20 January, 2021; v1 submitted 5 January, 2021;
originally announced January 2021.
-
Do economic effects of the anti-COVID-19 lockdowns in different regions interact through supply chains?
Authors:
Hiroyasu Inoue,
Yohsuke Murase,
Yasuyuki Todo
Abstract:
To prevent the spread of COVID-19, many cities, states, and countries have `locked down', restricting economic activities in non-essential sectors. Such lockdowns have substantially shrunk production in most countries. This study examines how the economic effects of lockdowns in different regions interact through supply chains, a network of firms for production, simulating an agent-based model of…
▽ More
To prevent the spread of COVID-19, many cities, states, and countries have `locked down', restricting economic activities in non-essential sectors. Such lockdowns have substantially shrunk production in most countries. This study examines how the economic effects of lockdowns in different regions interact through supply chains, a network of firms for production, simulating an agent-based model of production on supply-chain data for 1.6 million firms in Japan. We further investigate how the complex network structure affects the interactions of lockdowns, emphasising the role of upstreamness and loops by decomposing supply-chain flows into potential and circular flow components. We find that a region's upstreamness, intensity of loops, and supplier substitutability in supply chains with other regions largely determine the economic effect of the lockdown in the region. In particular, when a region lifts its lockdown, its economic recovery substantially varies depending on whether it lifts lockdown alone or together with another region closely linked through supply chains. These results propose the need for inter-region policy coordination to reduce the economic loss from lockdowns.
△ Less
Submitted 7 January, 2021; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Gibbs states, algebraic dynamics and generalized Riesz systems
Authors:
Fabio Bagarello,
Hiroshi Inoue,
Camillo Trapani
Abstract:
In PT-quantum mechanics the generator of the dynamics of a physical system is not necessarily a self-adjoint Hamiltonian. It is now clear that this choice does not prevent to get a unitary time evolution and a real spectrum of the Hamiltonian, even if, most of the times, one is forced to deal with biorthogonal sets rather than with on orthonormal basis of eigenvectors. In this paper we consider so…
▽ More
In PT-quantum mechanics the generator of the dynamics of a physical system is not necessarily a self-adjoint Hamiltonian. It is now clear that this choice does not prevent to get a unitary time evolution and a real spectrum of the Hamiltonian, even if, most of the times, one is forced to deal with biorthogonal sets rather than with on orthonormal basis of eigenvectors. In this paper we consider some extended versions of the Heisenberg algebraic dynamics and we relate this analysis to some generalized version of Gibbs states and to their related KMS-like conditions. We also discuss some preliminary aspects of the Tomita-Takesaki theory in our context.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Money flow network among firms' accounts in a regional bank of Japan
Authors:
Yoshi Fujiwara,
Hiroyasu Inoue,
Takayuki Yamaguchi,
Hideaki Aoyama,
Takuma Tanaka
Abstract:
In this study, we investigate the flow of money among bank accounts possessed by firms in a region by employing an exhaustive list of all the bank transfers in a regional bank in Japan, to clarify how the network of money flow is related to the economic activities of the firms. The network statistics and structures are examined and shown to be similar to those of a nationwide production network. S…
▽ More
In this study, we investigate the flow of money among bank accounts possessed by firms in a region by employing an exhaustive list of all the bank transfers in a regional bank in Japan, to clarify how the network of money flow is related to the economic activities of the firms. The network statistics and structures are examined and shown to be similar to those of a nationwide production network. Specifically, the bowtie analysis indicates what we refer to as a "walnut" structure with core and upstream/downstream components. To quantify the location of an individual account in the network, we used the Hodge decomposition method and found that the Hodge potential of the account has a significant correlation to its position in the bowtie structure as well as to its net flow of incoming and outgoing money and links, namely the net demand/supply of individual accounts. In addition, we used non-negative matrix factorization to identify important factors underlying the entire flow of money; it can be interpreted that these factors are associated with regional economic activities.One factor has a feature whereby the remittance source is localized to the largest city in the region, while the destination is scattered. The other factors correspond to the economic activities specific to different local places.This study serves as a basis for further investigation on the relationship between money flow and economic activities of firms.
△ Less
Submitted 30 July, 2020; v1 submitted 29 July, 2020;
originally announced July 2020.
-
Determination of the phase coherence length of PdCoO$_2$ nanostructures
Authors:
T. Harada,
P. Bredol,
H. Inoue,
S. Ito,
J. Mannhart,
A. Tsukazaki
Abstract:
The two-dimensional layered compound PdCoO$_2$ is one of the best oxide conductors, providing an intriguing research arena opened by the long mean free path and the very high mobility of ~51000 cm2/Vs. These properties turn PdCoO$_2$ into a candidate material for nanoscale quantum devices. By exploring universal conductance fluctuations originating at nanoscale PdCoO$_2$ Hall-bar devices, we deter…
▽ More
The two-dimensional layered compound PdCoO$_2$ is one of the best oxide conductors, providing an intriguing research arena opened by the long mean free path and the very high mobility of ~51000 cm2/Vs. These properties turn PdCoO$_2$ into a candidate material for nanoscale quantum devices. By exploring universal conductance fluctuations originating at nanoscale PdCoO$_2$ Hall-bar devices, we determined the phase coherence length of electron transport in c-axis oriented PdCoO$_2$ thin films to equal ~100 nm. The weak temperature dependence of the measured phase coherence length suggests that defect scattering at twin boundaries in the PdCoO$_2$ thin film governs phase breaking. These results suggest that phase coherent devices can be achieved by realizing the devices smaller than the size of twin domains, via refined microfabrication and suppression of twin boundaries.
△ Less
Submitted 17 January, 2021; v1 submitted 6 July, 2020;
originally announced July 2020.
-
Universal bound to the amplitude of the vortex Nernst signal in superconductors
Authors:
Carl Willem Rischau,
Yuke Li,
Benoît Fauqué,
Hisashi Inoue,
Minu Kim,
Christopher Bell,
Harold Y. Hwang,
Aharon Kapitulnik,
Kamran Behnia
Abstract:
A liquid of superconducting vortices generates a transverse thermoelectric response. This Nernst signal has a tail deep in the normal state due to superconducting fluctuations. Here, we present a study of the Nernst effect in two-dimensional hetero-structures of Nb-doped strontium titanate (STO) and in amorphous MoGe. The Nernst signal generated by ephemeral Cooper pairs above the critical tempera…
▽ More
A liquid of superconducting vortices generates a transverse thermoelectric response. This Nernst signal has a tail deep in the normal state due to superconducting fluctuations. Here, we present a study of the Nernst effect in two-dimensional hetero-structures of Nb-doped strontium titanate (STO) and in amorphous MoGe. The Nernst signal generated by ephemeral Cooper pairs above the critical temperature has the magnitude expected by theory in STO. On the other hand, the peak amplitude of the vortex Nernst signal below $T_c$ is comparable in both and in numerous other superconductors despite the large distribution of the critical temperature and the critical magnetic fields. In four superconductors belonging to different families, the maximum Nernst signal corresponds to an entropy per vortex per layer of $\approx$ k$_Bln2$.
△ Less
Submitted 12 January, 2021; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Matrix-valued Bratu equation associated with the symmetric domains of type BDI and CI
Authors:
Hiroto Inoue
Abstract:
A formulation of the exponential matrix solution of the matrix-valued Bratu equation is given, based on the structure of the symmetric domain of type BDI. Moreover, an analog for the symmetric domain of type CI is given.
A formulation of the exponential matrix solution of the matrix-valued Bratu equation is given, based on the structure of the symmetric domain of type BDI. Moreover, an analog for the symmetric domain of type CI is given.
△ Less
Submitted 23 May, 2020;
originally announced May 2020.
-
The propagation of the economic impact through supply chains: The case of a mega-city lockdown against the spread of COVID-19
Authors:
Hiroyasu Inoue,
Yasuyuki Todo
Abstract:
This study quantifies the economic effect of a possible lockdown of Tokyo to prevent spread of COVID-19. The negative effect of the lockdown may propagate to other regions through supply chains because of shortage of supply and demand. Applying an agent-based model to the actual supply chains of nearly 1.6 million firms in Japan, we simulate what would happen to production activities outside Tokyo…
▽ More
This study quantifies the economic effect of a possible lockdown of Tokyo to prevent spread of COVID-19. The negative effect of the lockdown may propagate to other regions through supply chains because of shortage of supply and demand. Applying an agent-based model to the actual supply chains of nearly 1.6 million firms in Japan, we simulate what would happen to production activities outside Tokyo when production activities that are not essential to citizens' survival in Tokyo were shut down for a certain period. We find that when Tokyo is locked down for a month, the indirect effect on other regions would be twice as large as the direct effect on Tokyo, leading to a total production loss of 27 trillion yen in Japan, or 5.3% of its annual GDP. Although the production shut down in Tokyo accounts for 21% of the total production in Japan, the lockdown would result in a reduction of the daily production in Japan by 86% in a month.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
Economic complexity of prefectures in Japan
Authors:
Abhijit Chakraborty,
Hiroyasu Inoue,
Yoshi Fujiwara
Abstract:
Every nation prioritizes the inclusive economic growth and development of all regions. However, we observe that economic activities are clustered in space, which results in a disparity in per-capita income among different regions. A complexity-based method was proposed by Hidalgo and Hausmann [PNAS 106, 10570-10575 (2009)] to explain the large gaps in per-capita income across countries. Although t…
▽ More
Every nation prioritizes the inclusive economic growth and development of all regions. However, we observe that economic activities are clustered in space, which results in a disparity in per-capita income among different regions. A complexity-based method was proposed by Hidalgo and Hausmann [PNAS 106, 10570-10575 (2009)] to explain the large gaps in per-capita income across countries. Although there have been extensive studies on countries' economic complexity using international export data, studies on economic complexity at the regional level are relatively less studied. Here, we study the industrial sector complexity of prefectures in Japan based on the basic information of more than one million firms. We aggregate the data as a bipartite network of prefectures and industrial sectors. We decompose the bipartite network as a prefecture-prefecture network and sector-sector network, which reveals the relationships among them. Similarities among the prefectures and among the sectors are measured using a metric. From these similarity matrices, we cluster the prefectures and sectors using the minimal spanning tree technique.The computed economic complexity index from the structure of the bipartite network shows a high correlation with macroeconomic indicators, such as per-capita gross prefectural product and prefectural income per person. We argue that this index reflects the present economic performance and hidden potential of the prefectures for future growth.
△ Less
Submitted 31 August, 2020; v1 submitted 11 February, 2020;
originally announced February 2020.
-
X-ray emissions from magnetic polar regions of neutron stars
Authors:
Hajime Inoue
Abstract:
Structures of X-ray emitting magnetic polar regions on neutron stars in X-ray pulsars are studied in a range of the accretion rate, 10$^{17}$ g s$^{-1} \sim 10^{18}$ g s$^{-1}$. It is shown that a thin but tall, radiation energy dominated, X-ray emitting polar cone appears at each of the polar regions. The height of the polar cone is several times as large as the neutron star radius. The energy ga…
▽ More
Structures of X-ray emitting magnetic polar regions on neutron stars in X-ray pulsars are studied in a range of the accretion rate, 10$^{17}$ g s$^{-1} \sim 10^{18}$ g s$^{-1}$. It is shown that a thin but tall, radiation energy dominated, X-ray emitting polar cone appears at each of the polar regions. The height of the polar cone is several times as large as the neutron star radius. The energy gain due to the gravity of the neutron star in the polar cone exceeds the energy loss due to photon diffusion in the azimuthal direction of the cone, and a significant amount of energy is advected to the neutron star surface. Then, the radiation energy carried with the flow should become so large for the radiation pressure to overcome the magnetic pressure at the bottom of the cone. As a result, the matter should expand in the tangential direction along the neutron star surface, dragging the magnetic lines of force, and form a mound-like structure. The advected energy to the bottom of the cone should finally be radiated away from the surface of the polar mound and the matter should be settled on the neutron star surface there. From such configurations, we can expect an X-ray spectrum composed of a multi-color blackbody spectrum from the polar cone region and a quasi-single blackbody spectrum from the polar mound region. These spectral properties agree with observations. A combination of a fairly sharp pencil beam and a broad fan beam is expected from the polar cone region, while a broad pencil beam is expected from the polar mound region. With these X-ray beam properties, basic patterns of pulse profiles of X-ray pulsars can be explained too.
△ Less
Submitted 26 December, 2019;
originally announced December 2019.
-
Automated Deductive Verification for Ladder Programming
Authors:
Denis Cousineau,
David Mentré,
Hiroaki Inoue
Abstract:
Ladder Logics is a programming language standardized in IEC 61131-3 and widely used for programming industrial Programmable Logic Controllers (PLC). A PLC program consists of inputs (whose values are given at runtime by factory sensors), outputs (whose values are given at runtime to factory actuators), and the logical expressions computing output values from input values. Due to the graphical f…
▽ More
Ladder Logics is a programming language standardized in IEC 61131-3 and widely used for programming industrial Programmable Logic Controllers (PLC). A PLC program consists of inputs (whose values are given at runtime by factory sensors), outputs (whose values are given at runtime to factory actuators), and the logical expressions computing output values from input values. Due to the graphical form of Ladder programs, and the amount of inputs and outputs in typical industrial programs, debugging such programs is time-consuming and error-prone. We present, in this paper, a Why3-based tool prototype we have implemented for automating the use of deductive verification in order to provide an easy-to-use and robust debugging tool for Ladder programmers.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
Generalized Riesz systems and quasi bases in Hilbert space
Authors:
Fabio Bagarello,
Hiroshi Inoue,
Camillo Trapani
Abstract:
The purpose of this article is twofold. First of all, the notion of $(D, E)$-quasi basis is introduced for a pair $(D, E)$ of dense subspaces of Hilbert spaces. This consists of two biorthogonal sequences $\{ \varphi_n \}$ and $\{ ψ_n \}$ such that $\sum_{n=0}^\infty \ip{x}{\varphi_n}\ip{ψ_n}{y}=\ip{x}{y}$ for all $x \in D$ and $y \in E$. Secondly, it is shown that if biorthogonal sequences…
▽ More
The purpose of this article is twofold. First of all, the notion of $(D, E)$-quasi basis is introduced for a pair $(D, E)$ of dense subspaces of Hilbert spaces. This consists of two biorthogonal sequences $\{ \varphi_n \}$ and $\{ ψ_n \}$ such that $\sum_{n=0}^\infty \ip{x}{\varphi_n}\ip{ψ_n}{y}=\ip{x}{y}$ for all $x \in D$ and $y \in E$. Secondly, it is shown that if biorthogonal sequences $\{ \varphi_n \}$ and $\{ ψ_n \}$ form a $(D ,E)$-quasi basis, then they are generalized Riesz systems. The latter play an interesting role for the construction of non-self-adjoint Hamiltonians and other physically relevant operators.
△ Less
Submitted 12 July, 2019;
originally announced July 2019.
-
Schroedinger wave operators on the discrete half-line
Authors:
Hideki Inoue,
Naohiro Tsuzu
Abstract:
An explicit formula for the wave operators associated with Schroedinger operators on the discrete half-line is deduced from their stationary expressions. The formula enables us to understand the wave operators as one dimensional pseudo-differential operators of order zero. As an application, we give a topological interpretation for Levinson's theorem, which relates the scattering phase shift and t…
▽ More
An explicit formula for the wave operators associated with Schroedinger operators on the discrete half-line is deduced from their stationary expressions. The formula enables us to understand the wave operators as one dimensional pseudo-differential operators of order zero. As an application, we give a topological interpretation for Levinson's theorem, which relates the scattering phase shift and the number of bound states of the system.
△ Less
Submitted 7 July, 2019;
originally announced July 2019.
-
Clean 2D superconductivity in a bulk van der Waals superlattice
Authors:
Aravind Devarakonda,
Hisashi Inoue,
Shiang Fang,
Cigdem Ozsoy-Keskinbora,
Takehito Suzuki,
Markus Kriener,
Liang Fu,
Efthimios Kaxiras,
David C. Bell,
Joseph G. Checkelsky
Abstract:
Advances in low-dimensional superconductivity are often realized through improvements in material quality. Apart from a small group of organic materials, there is a near absence of clean-limit two-dimensional (2D) superconductors, which presents an impediment to the pursuit of numerous long-standing predictions for exotic superconductivity with fragile pairing symmetries. Here, we report the devel…
▽ More
Advances in low-dimensional superconductivity are often realized through improvements in material quality. Apart from a small group of organic materials, there is a near absence of clean-limit two-dimensional (2D) superconductors, which presents an impediment to the pursuit of numerous long-standing predictions for exotic superconductivity with fragile pairing symmetries. Here, we report the development of a bulk superlattice consisting of the transition metal dichalcogenide (TMD) superconductor 2$H$-niobium disulfide (2$H$-NbS$_2$) and a commensurate block layer that yields dramatically enhanced two-dimensionality, high electronic quality, and clean-limit inorganic 2D superconductivity. The structure of this material may naturally be extended to generate a distinct family of 2D superconductors, topological insulators, and excitonic systems based on TMDs with improved material properties.
△ Less
Submitted 11 October, 2020; v1 submitted 5 June, 2019;
originally announced June 2019.
-
Molecular Beam Epitaxy Growth of Antiferromagnetic Kagome Metal FeSn
Authors:
Hisashi Inoue,
Minyong Han,
Linda Ye,
Takehito Suzuki,
Joseph. G. Checkelsky
Abstract:
FeSn is a room-temperature antiferromagnet expected to host Dirac fermions in its electronic structure. The interplay of magnetic degree of freedom and the Dirac fermions makes FeSn an attractive platform for spintronics and electronic devices. While stabilization of thin film FeSn is needed for the development of such devices, there exist no previous report of epitaxial growth of single crystalli…
▽ More
FeSn is a room-temperature antiferromagnet expected to host Dirac fermions in its electronic structure. The interplay of magnetic degree of freedom and the Dirac fermions makes FeSn an attractive platform for spintronics and electronic devices. While stabilization of thin film FeSn is needed for the development of such devices, there exist no previous report of epitaxial growth of single crystalline FeSn. Here we report the realization of epitaxial thin films of FeSn (001) grown by molecular beam epitaxy on single crystal SrTiO$_{3}$ (111) substrates. By combining X-ray diffraction, electrical transport, and torque magnetometry measurements, we demonstrate the high quality of these films with the residual resistivity ratio $ρ_{xx}(300 \hspace{0.2em}{\rm K})/ρ_{xx}(2 \hspace{0.2em}{\rm K}) = 24$ and antiferromagnetic ordering at $T_{\rm N}$ = 353 K. These developments open a pathway to manipulate the Dirac fermions in FeSn by both magnetic interactions and the electronic field effect for use in antiferromagnetic spintronics devices.
△ Less
Submitted 30 May, 2019;
originally announced May 2019.
-
Multi-Sample Dropout for Accelerated Training and Better Generalization
Authors:
Hiroshi Inoue
Abstract:
Dropout is a simple but efficient regularization technique for achieving better generalization of deep neural networks (DNNs); hence it is widely used in tasks based on DNNs. During training, dropout randomly discards a portion of the neurons to avoid overfitting. This paper presents an enhanced dropout technique, which we call multi-sample dropout, for both accelerating training and improving gen…
▽ More
Dropout is a simple but efficient regularization technique for achieving better generalization of deep neural networks (DNNs); hence it is widely used in tasks based on DNNs. During training, dropout randomly discards a portion of the neurons to avoid overfitting. This paper presents an enhanced dropout technique, which we call multi-sample dropout, for both accelerating training and improving generalization over the original dropout. The original dropout creates a randomly selected subset (called a dropout sample) from the input in each training iteration while the multi-sample dropout creates multiple dropout samples. The loss is calculated for each sample, and then the sample losses are averaged to obtain the final loss. This technique can be easily implemented by duplicating a part of the network after the dropout layer while sharing the weights among the duplicated fully connected layers. Experimental results using image classification tasks including ImageNet, CIFAR-10, and CIFAR-100 showed that multi-sample dropout accelerates training. Moreover, the networks trained using multi-sample dropout achieved lower error rates compared to networks trained with the original dropout. The additional computation cost due to the duplicated operations is not significant for deep convolutional networks because most of the computation time is consumed in the convolution layers before the dropout layer, which are not duplicated.
△ Less
Submitted 20 October, 2020; v1 submitted 23 May, 2019;
originally announced May 2019.
-
A Type System for First-Class Layers with Inheritance, Subty**, and Swap**
Authors:
Hiroaki Inoue,
Atsushi Igarashi
Abstract:
Context-Oriented Programming (COP) is a programming paradigm to encourage modularization of context-dependent software. Key features of COP are layers---modules to describe context-dependent behavioral variations of a software system---and their dynamic activation, which can modify the behavior of multiple objects that have already been instantiated. Typechecking programs written in a COP language…
▽ More
Context-Oriented Programming (COP) is a programming paradigm to encourage modularization of context-dependent software. Key features of COP are layers---modules to describe context-dependent behavioral variations of a software system---and their dynamic activation, which can modify the behavior of multiple objects that have already been instantiated. Typechecking programs written in a COP language is difficult because the activation of a layer can even change objects' interfaces. Inoue et al. have informally discussed how to make JCop, an extension of Java for COP by Appeltauer et al., type-safe.
In this article, we formalize a small COP language called ContextFJ$_{<:}$ with its operational semantics and type system and show its type soundness. The language models main features of the type-safe version of JCop, including dynamically activated first-class layers, inheritance of layer definitions, layer subty**, and layer swap**.
△ Less
Submitted 4 May, 2019;
originally announced May 2019.
-
Band engineering of a magnetic thin film rare earth monopnictide
Authors:
Hisashi Inoue,
Minyong Han,
Mengli Hu,
Takehito Suzuki,
Junwei Liu,
Joseph G. Checkelsky
Abstract:
Realizing quantum materials in few atomic layer morphologies is a key to both observing and controlling a wide variety of exotic quantum phenomena. This includes topological electronic materials, where the tunability and dimensionality of few layer materials have enabled the detection of $Z_2$, Chern, and Majorana phases. Here, we report the development of a platform for thin film correlated, topo…
▽ More
Realizing quantum materials in few atomic layer morphologies is a key to both observing and controlling a wide variety of exotic quantum phenomena. This includes topological electronic materials, where the tunability and dimensionality of few layer materials have enabled the detection of $Z_2$, Chern, and Majorana phases. Here, we report the development of a platform for thin film correlated, topological states in the magnetic rare-earth monopnictide ($RX$) system GdBi synthesized by molecular beam epitaxy. This material is known from bulk single crystal studies to be semimetallic antiferromagnets with Neel temperature $T_N =$ 28 K and is the magnetic analog of the non-$f$-electron containing system LaBi proposed to have topological surface states. Our transport and magnetization studies of thin films grown epitaxially on BaF$_2$ reveal that semimetallicity is lifted below approximately 8 crystallographic unit cells while magnetic order is maintained down to our minimum thickness of 5 crystallographic unit cells. First-principles calculations show that the non-trivial topology is preserved down to the monolayer limit, where quantum confinement and the lattice symmetry give rise to a $C=2$ Chern insulator phase. We further demonstrate the stabilization of these films against atmospheric degradation using a combination of air-free buffer and cap** procedures. These results together identify thin film $RX$ materials as potential platforms for engineering topological electronic bands in correlated magnetic materials.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Explicit formula for Schroedinger wave operators on the half-line for potentials up to optimal decay
Authors:
Hideki Inoue
Abstract:
We give an explicit formula for the wave operators for Schroedinger operators on the half-line with a potential decaying strictly faster than the polynomial of degree minus two. The formula consists of the main term given by the scattering operator and a function of the generator of the dilation group, and a Hilbert-Schmidt remainder term. Our method is based on the elementary construction of the…
▽ More
We give an explicit formula for the wave operators for Schroedinger operators on the half-line with a potential decaying strictly faster than the polynomial of degree minus two. The formula consists of the main term given by the scattering operator and a function of the generator of the dilation group, and a Hilbert-Schmidt remainder term. Our method is based on the elementary construction of the generalized Fourier transform in terms of the solutions of the Volterra integral equations. As a corollary, a topological interpretation of Levinson's theorem is established via an index theorem approach.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Reproductions of super-orbital X-ray light-curves with the precessing accretion ring model and implications on accretion flows through accretion rings
Authors:
Hajime Inoue
Abstract:
X-ray light curves of three X-ray pulsars, SMC X-1, LMC X-4 and Her X-1, folded with their respective super-orbital periods, are shown to be well reproduced by a model in which X-rays from a compact object towards us are periodically obscured by a precessing ring at the outermost part of an accretion disk around the central object. A situation is considered in which matter from a companion star fl…
▽ More
X-ray light curves of three X-ray pulsars, SMC X-1, LMC X-4 and Her X-1, folded with their respective super-orbital periods, are shown to be well reproduced by a model in which X-rays from a compact object towards us are periodically obscured by a precessing ring at the outermost part of an accretion disk around the central object. A situation is considered in which matter from a companion star flows into a gravitational field of a compact star carrying a certain amount of specific angular momentum and first forms a geometrically thick ring-tube along the Keplerian circular orbit. For the model to well fit to the observations, it is necessary that the optical depth of the ring-tube for Compton scattering, $τ\simeq 1 \sim 2$, the ring matter temperature, $T \simeq 10^{5} \sim 10^{6}$ K and the ionization parameter, $ξ\simeq 10^{2}$ erg cm s$^{-1}$ due to X-ray heating from the central X-ray source. From simple energetics- and perturbation-arguments, we find that a precession of such a ring is rather stable and possible to be excited in the $T$ and $ξ$ ranges. The time during which matter accumulates in the ring is estimated to be $\sim 10^{6}$ s, and is shown to be comparable to the time for an accretion disk to extend from the ring. It is discussed that in the above $T$ and $ξ$ ranges, the ring-tube matter could become thermally unstable. Then, relatively high density regions in the ring-tube further cools down and tends to shrink to the tube center. The flow across the ring circulating flow should excite turbulent motions, and angular momenta of the matter would be effectively transferred across the tube. Finally, a steady flow should be established from the companion star through the accretion ring to the accretion disk towards the central compact star.
△ Less
Submitted 24 February, 2019;
originally announced February 2019.
-
Exponential random graph models for the Japanese bipartite network of banks and firms
Authors:
Abhijit Chakraborty,
Hazem Krichene,
Hiroyasu Inoue,
Yoshi Fujiwara
Abstract:
We use the exponential random graph models to understand the network structure and its generative process for the Japanese bipartite network of banks and firms. One of the well known and simple model of exponential random graph is the Bernoulli model which shows the links in the bank-firm network are not independent from each other. Another popular exponential random graph model, the two star mode…
▽ More
We use the exponential random graph models to understand the network structure and its generative process for the Japanese bipartite network of banks and firms. One of the well known and simple model of exponential random graph is the Bernoulli model which shows the links in the bank-firm network are not independent from each other. Another popular exponential random graph model, the two star model, indicates that the bank-firms are in a state where macroscopic variables of the system can show large fluctuations. Moreover, the presence of high fluctuations reflect a fragile nature of the bank-firm network.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Topological Levinson's theorem for inverse square potentials: complex, infinite, but not exceptional
Authors:
H. Inoue,
S. Richard
Abstract:
In this review paper we carry on our investigations on Schroedinger operators with inverse square potentials on the half-line. Depending on several parameters, such operators possess either a finite number of complex eigenvalues, or an infinite one, but also some spectral singularities embedded in the continuous spectrum (exceptional situations). The spectral and the scattering theory for these op…
▽ More
In this review paper we carry on our investigations on Schroedinger operators with inverse square potentials on the half-line. Depending on several parameters, such operators possess either a finite number of complex eigenvalues, or an infinite one, but also some spectral singularities embedded in the continuous spectrum (exceptional situations). The spectral and the scattering theory for these operators is recalled, and new results for the exceptional cases are provided. Some index theorems in scattering theory are also developed, and explanations why these results can not be extended to the exceptional cases are provided.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Detection of polarized gamma-ray emission from the Crab nebula with Hitomi Soft Gamma-ray Detector
Authors:
Hitomi Collaboration,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steven W. Allen,
Lorella Angelini,
Marc Audard,
Hisamitsu Awaki,
Magnus Axelsson,
Aya Bamba,
Marshall W. Bautz,
Roger Blandford,
Laura W. Brenneman,
Gregory V. Brown,
Esra Bulbul,
Edward M. Cackett,
Maria Chernyakova,
Meng P. Chiao,
Paolo S. Coppi,
Elisa Costantini,
Jelle de Plaa,
Cor P. de Vries,
Jan-Willem den Herder,
Chris Done,
Tadayasu Dotani
, et al. (169 additional authors not shown)
Abstract:
We present the results from the Hitomi Soft Gamma-ray Detector (SGD) observation of the Crab nebula. The main part of SGD is a Compton camera, which in addition to being a spectrometer, is capable of measuring polarization of gamma-ray photons. The Crab nebula is one of the brightest X-ray / gamma-ray sources on the sky, and, the only source from which polarized X-ray photons have been detected. S…
▽ More
We present the results from the Hitomi Soft Gamma-ray Detector (SGD) observation of the Crab nebula. The main part of SGD is a Compton camera, which in addition to being a spectrometer, is capable of measuring polarization of gamma-ray photons. The Crab nebula is one of the brightest X-ray / gamma-ray sources on the sky, and, the only source from which polarized X-ray photons have been detected. SGD observed the Crab nebula during the initial test observation phase of Hitomi. We performed the data analysis of the SGD observation, the SGD background estimation and the SGD Monte Carlo simulations, and, successfully detected polarized gamma-ray emission from the Crab nebula with only about 5 ks exposure time. The obtained polarization fraction of the phase-integrated Crab emission (sum of pulsar and nebula emissions) is (22.1 $\pm$ 10.6)% and, the polarization angle is 110.7$^o$ + 13.2 / $-$13.0$^o$ in the energy range of 60--160 keV (The errors correspond to the 1 sigma deviation). The confidence level of the polarization detection was 99.3%. The polarization angle measured by SGD is about one sigma deviation with the projected spin axis of the pulsar, 124.0$^o$ $\pm$0.1$^o$.
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
-
Series-connected array of superconductor-insulator-superconductor junctions in the 100-GHz band heterodyne mixer for FOREST on the Nobeyama 45-m telescope
Authors:
Taku Nakajima,
Hirofumi Inoue,
Yumi Fujii,
Chieko Miyazawa,
Hiroyuki Iwashita,
Takeshi Sakai,
Takashi Noguchi,
Akira Mizuno
Abstract:
In this study, we designed and experimentally evaluated a series-connected array of superconductor-insulator-superconductor (SIS) junctions in the 100-GHz band mixer for the multi-beam receiver FOREST on the Nobeyama 45-m millimeter-wave telescope. The construction of the junction chip comprised a waveguide probe antenna, impedance matching circuit, SIS array junction, and choke filter, which were…
▽ More
In this study, we designed and experimentally evaluated a series-connected array of superconductor-insulator-superconductor (SIS) junctions in the 100-GHz band mixer for the multi-beam receiver FOREST on the Nobeyama 45-m millimeter-wave telescope. The construction of the junction chip comprised a waveguide probe antenna, impedance matching circuit, SIS array junction, and choke filter, which were made from a superconducting niobium planar circuit on a quartz substrate. The multi-stage impedance matching circuit between the feed point and the SIS junction was designed as a capacitively loaded transmission line, and it comprised two sections with high (~90 Ohm) and low (~10 Ohm) characteristic impedance transmission lines. The structure of this tuning line was simple and easy to fabricate, and the feed impedance matched with the SIS junction in a wide frequency range. The signal coupling efficiency was more than 92% and the expected receiver noise temperature was approximately two times the quantum limit for 75-125 GHz based on quantum theory. The array junction devices with 3-6 connected junctions were fabricated and we measured their performance in terms of the receiver noise temperature and gain compression in the laboratory. We successfully developed an array junction device with a receiver noise temperature of ~15-30 K and confirmed that the improvement in the saturation power corresponded to the number of junctions. The newly developed array junction mixer was installed in the FOREST receiver and it successfully detected the 12CO (J = 1-0) molecular line toward IRC+10216 with the Nobeyama 45-m telescope.
△ Less
Submitted 7 September, 2018;
originally announced September 2018.
-
Hierarchical communities in the walnut structure of the Japanese production network
Authors:
Abhijit Chakraborty,
Yuichi Kichikawa,
Takashi Iino,
Hiroshi Iyetomi,
Hiroyasu Inoue,
Yoshi Fujiwara,
Hideaki Aoyama
Abstract:
This paper studies the structure of the Japanese production network, which includes one million firms and five million supplier-customer links. This study finds that this network forms a tightly-knit structure with a core giant strongly connected component (GSCC) surrounded by IN and OUT components constituting two half-shells of the GSCC, which we call a\textit{walnut} structure because of its sh…
▽ More
This paper studies the structure of the Japanese production network, which includes one million firms and five million supplier-customer links. This study finds that this network forms a tightly-knit structure with a core giant strongly connected component (GSCC) surrounded by IN and OUT components constituting two half-shells of the GSCC, which we call a\textit{walnut} structure because of its shape. The hierarchical structure of the communities is studied by the Infomap method, and most of the irreducible communities are found to be at the second level. The composition of some of the major communities, including overexpressions regarding their industrial or regional nature, and the connections that exist between the communities are studied in detail. The findings obtained here cause us to question the validity and accuracy of using the conventional input-output analysis, which is expected to be useful when firms in the same sectors are highly connected to each other.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
The density and disorder tuned superconductor-metal transition in two dimensions
Authors:
Zhuoyu Chen,
Adrian G. Swartz,
Hyeok Yoon,
Hisashi Inoue,
Tyler Merz,
Di Lu,
Yanwu Xie,
Hongtao Yuan,
Yasuyuki Hikita,
Srinivas Raghu,
Harold Y. Hwang
Abstract:
Quantum ground states which arise at atomically controlled oxide interfaces provide an opportunity to address key questions in condensed matter physics, including the nature of two-dimensional (2D) metallic behaviour often observed adjacent to superconductivity. At the superconducting LaAlO3/SrTiO3 interface, a metallic ground state emerges upon the collapse of superconductivity with field-effect…
▽ More
Quantum ground states which arise at atomically controlled oxide interfaces provide an opportunity to address key questions in condensed matter physics, including the nature of two-dimensional (2D) metallic behaviour often observed adjacent to superconductivity. At the superconducting LaAlO3/SrTiO3 interface, a metallic ground state emerges upon the collapse of superconductivity with field-effect gating. Strikingly, such metallicity is accompanied with a pseudogap. Here, we utilize independent control of carrier density and disorder of the interfacial superconductor using dual electrostatic gates, which enables the comprehensive examination of the electronic phase diagram approaching zero temperature. We find that the pseudogap corresponds to precursor pairing, and the onset of long-range phase coherence forms a 2D superconducting dome as a function of the dual gate voltages. The gate-tuned superconductor-metal transitions are driven by macroscopic phase fluctuations of Josephson coupled superconducting puddles.
△ Less
Submitted 22 July, 2018;
originally announced July 2018.
-
Dual-Gate Modulation of Carrier Density and Disorder in an Oxide Two-Dimensional Electron System
Authors:
Zhuoyu Chen,
Hongtao Yuan,
Yanwu Xie,
Di Lu,
Hisashi Inoue,
Yasuyuki Hikita,
Christopher Bell,
Harold Y. Hwang
Abstract:
Carrier density and disorder are two crucial parameters that control the properties of correlated two-dimensional electron systems. In order to disentangle their individual contributions to quantum phenomena, independent tuning of these two parameters is required. Here, by utilizing a hybrid liquid/solid electric dual-gate geometry acting on the conducting LaAlO3/SrTiO3 heterointerface, we obtain…
▽ More
Carrier density and disorder are two crucial parameters that control the properties of correlated two-dimensional electron systems. In order to disentangle their individual contributions to quantum phenomena, independent tuning of these two parameters is required. Here, by utilizing a hybrid liquid/solid electric dual-gate geometry acting on the conducting LaAlO3/SrTiO3 heterointerface, we obtain an additional degree of freedom to strongly modify the electron confinement profile and thus the strength of interfacial scattering, independent from the carrier density. A dual-gate controlled nonlinear Hall effect is a direct manifestation of this profile, which can be quantitatively understood by a Poisson-Schrodinger subband model. In particular, the large nonlinear dielectric response of SrTiO3 enables a very wide range of tunable density and disorder, far beyond that for conventional semiconductors. Our study provides a broad framework for understanding various reported phenomena at the LaAlO3/SrTiO3 interface.
△ Less
Submitted 22 July, 2018;
originally announced July 2018.
-
Observation of the signatures of sub-resolution defects in two-dimensional superconductors with scanning SQUID
Authors:
Hilary Noad,
Christopher A. Watson,
Hisashi Inoue,
Minu Kim,
Hiroki K. Sato,
Christopher Bell,
Harold Y. Hwang,
John R. Kirtley,
Kathryn A. Moler
Abstract:
The diamagnetic susceptibility of a superconductor is directly related to its superfluid density. Mutual inductance is a highly sensitive method for characterizing thin films; however, in traditional mutual inductance measurements, the measured response is a non-trivial average over the area of the mutual inductance coils, which are typically of millimeter size. Here we image localized, isolated f…
▽ More
The diamagnetic susceptibility of a superconductor is directly related to its superfluid density. Mutual inductance is a highly sensitive method for characterizing thin films; however, in traditional mutual inductance measurements, the measured response is a non-trivial average over the area of the mutual inductance coils, which are typically of millimeter size. Here we image localized, isolated features in the diamagnetic susceptibility of δ-doped SrTiO3, the 2-DES at the interface between LaAlO3 and SrTiO3, and Nb superconducting thin film systems using scanning superconducting quantum interference device susceptometry, with spatial resolution as fine as 0.7 μm. We show that these features can be modeled as locally suppressed superfluid density, with a single parameter that characterizes the strength of each feature. This method provides a systematic means of finding and quantifying submicron defects in two-dimensional superconductors.
△ Less
Submitted 6 August, 2018; v1 submitted 2 June, 2018;
originally announced June 2018.
-
Biorthogonal vectors, sesquilinear forms and some physical operators
Authors:
Fabio Bagarello,
Hiroshi Inoue,
Camillo Trapani
Abstract:
Continuing the analysis undertaken in previous articles, we discuss some features of non-self-adjoint operators and sesquilinear forms which are defined starting from two biorthogonal families of vectors, like the so-called generalized Riesz systems, enjoying certain properties. In particular we discuss what happens when they forms two $\D$-quasi bases.
Continuing the analysis undertaken in previous articles, we discuss some features of non-self-adjoint operators and sesquilinear forms which are defined starting from two biorthogonal families of vectors, like the so-called generalized Riesz systems, enjoying certain properties. In particular we discuss what happens when they forms two $\D$-quasi bases.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
Hitomi X-ray Observation of the Pulsar Wind Nebula G21.5$-$0.9
Authors:
Hitomi Collaboration,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steven W. Allen,
Lorella Angelini,
Marc Audard,
Hisamitsu Awaki,
Magnus Axelsson,
Aya Bamba,
Marshall W. Bautz,
Roger Blandford,
Laura W. Brenneman,
Gregory V. Brown,
Esra Bulbul,
Edward M. Cackett,
Maria Chernyakova,
Meng P. Chiao,
Paolo S. Coppi,
Elisa Costantini,
Jelle de Plaa,
Cor P. de Vries,
Jan-Willem den Herder,
Chris Done,
Tadayasu Dotani
, et al. (173 additional authors not shown)
Abstract:
We present results from the Hitomi X-ray observation of a young composite-type supernova remnant (SNR) G21.5$-$0.9, whose emission is dominated by the pulsar wind nebula (PWN) contribution. The X-ray spectra in the 0.8-80 keV range obtained with the Soft X-ray Spectrometer (SXS), Soft X-ray Imager (SXI) and Hard X-ray Imager (HXI) show a significant break in the continuum as previously found with…
▽ More
We present results from the Hitomi X-ray observation of a young composite-type supernova remnant (SNR) G21.5$-$0.9, whose emission is dominated by the pulsar wind nebula (PWN) contribution. The X-ray spectra in the 0.8-80 keV range obtained with the Soft X-ray Spectrometer (SXS), Soft X-ray Imager (SXI) and Hard X-ray Imager (HXI) show a significant break in the continuum as previously found with the NuSTAR observation. After taking into account all known emissions from the SNR other than the PWN itself, we find that the Hitomi spectra can be fitted with a broken power law with photon indices of $Γ_1=1.74\pm0.02$ and $Γ_2=2.14\pm0.01$ below and above the break at $7.1\pm0.3$ keV, which is significantly lower than the NuSTAR result ($\sim9.0$ keV). The spectral break cannot be reproduced by time-dependent particle injection one-zone spectral energy distribution models, which strongly indicates that a more complex emission model is needed, as suggested by recent theoretical models. We also search for narrow emission or absorption lines with the SXS, and perform a timing analysis of PSR J1833$-$1034 with the HXI and SGD. No significant pulsation is found from the pulsar. However, unexpectedly, narrow absorption line features are detected in the SXS data at 4.2345 keV and 9.296 keV with a significance of 3.65 $σ$. While the origin of these features is not understood, their mere detection opens up a new field of research and was only possible with the high resolution, sensitivity and ability to measure extended sources provided by an X-ray microcalorimeter.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Data Augmentation by Pairing Samples for Images Classification
Authors:
Hiroshi Inoue
Abstract:
Data augmentation is a widely used technique in many machine learning tasks, such as image classification, to virtually enlarge the training dataset size and avoid overfitting. Traditional data augmentation techniques for image classification tasks create new samples from the original training data by, for example, flip**, distorting, adding a small amount of noise to, or crop** a patch from a…
▽ More
Data augmentation is a widely used technique in many machine learning tasks, such as image classification, to virtually enlarge the training dataset size and avoid overfitting. Traditional data augmentation techniques for image classification tasks create new samples from the original training data by, for example, flip**, distorting, adding a small amount of noise to, or crop** a patch from an original image. In this paper, we introduce a simple but surprisingly effective data augmentation technique for image classification tasks. With our technique, named SamplePairing, we synthesize a new sample from one image by overlaying another image randomly chosen from the training data (i.e., taking an average of two images for each pixel). By using two images randomly selected from the training set, we can generate $N^2$ new samples from $N$ training samples. This simple data augmentation technique significantly improved classification accuracy for all the tested datasets; for example, the top-1 error rate was reduced from 33.5% to 29.0% for the ILSVRC 2012 dataset with GoogLeNet and from 8.22% to 6.93% in the CIFAR-10 dataset. We also show that our SamplePairing technique largely improved accuracy when the number of samples in the training set was very small. Therefore, our technique is more valuable for tasks with a limited amount of training data, such as medical imaging tasks.
△ Less
Submitted 11 April, 2018; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Temperature Structure in the Perseus Cluster Core Observed with Hitomi
Authors:
Hitomi Collaboration,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steven W. Allen,
Lorella Angelini,
Marc Audard,
Hisamitsu Awaki,
Magnus Axelsson,
Aya Bamba,
Marshall W. Bautz,
Roger Blandford,
Laura W. Brenneman,
Gregory V. Brown,
Esra Bulbul,
Edward M. Cackett,
Maria Chernyakova,
Meng P. Chiao,
Paolo S. Coppi,
Elisa Costantini,
Jelle de Plaa,
Cor P. de Vries,
Jan-Willem den Herder,
Chris Done,
Tadayasu Dotani
, et al. (170 additional authors not shown)
Abstract:
The present paper investigates the temperature structure of the X-ray emitting plasma in the core of the Perseus cluster using the 1.8--20.0 keV data obtained with the Soft X-ray Spectrometer (SXS) onboard the Hitomi Observatory. A series of four observations were carried out, with a total effective exposure time of 338 ks and covering a central region $\sim7'$ in diameter. The SXS was operated wi…
▽ More
The present paper investigates the temperature structure of the X-ray emitting plasma in the core of the Perseus cluster using the 1.8--20.0 keV data obtained with the Soft X-ray Spectrometer (SXS) onboard the Hitomi Observatory. A series of four observations were carried out, with a total effective exposure time of 338 ks and covering a central region $\sim7'$ in diameter. The SXS was operated with an energy resolution of $\sim$5 eV (full width at half maximum) at 5.9 keV. Not only fine structures of K-shell lines in He-like ions but also transitions from higher principal quantum numbers are clearly resolved from Si through Fe. This enables us to perform temperature diagnostics using the line ratios of Si, S, Ar, Ca, and Fe, and to provide the first direct measurement of the excitation temperature and ionization temperature in the Perseus cluster. The observed spectrum is roughly reproduced by a single temperature thermal plasma model in collisional ionization equilibrium, but detailed line ratio diagnostics reveal slight deviations from this approximation. In particular, the data exhibit an apparent trend of increasing ionization temperature with increasing atomic mass, as well as small differences between the ionization and excitation temperatures for Fe, the only element for which both temperatures can be measured. The best-fit two-temperature models suggest a combination of 3 and 5 keV gas, which is consistent with the idea that the observed small deviations from a single temperature approximation are due to the effects of projection of the known radial temperature gradient in the cluster core along the line of sight. Comparison with the Chandra/ACIS and the XMM-Newton/RGS results on the other hand suggests that additional lower-temperature components are present in the ICM but not detectable by Hitomi SXS given its 1.8--20 keV energy band.
△ Less
Submitted 18 December, 2017;
originally announced December 2017.
-
Atomic data and spectral modeling constraints from high-resolution X-ray observations of the Perseus cluster with Hitomi
Authors:
Hitomi Collaboration,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steven W. Allen,
Lorella Angelini,
Marc Audard,
Hisamitsu Awaki,
Magnus Axelsson,
Aya Bamba,
Marshall W. Bautz,
Roger Blandford,
Laura W. Brenneman,
Gregory V. Brown,
Esra Bulbul,
Edward M. Cackett,
Maria Chernyakova,
Meng P. Chiao,
Paolo S. Coppi,
Elisa Costantini,
Jelle de Plaa,
Cor P. de Vries,
Jan-Willem den Herder,
Chris Done,
Tadayasu Dotani
, et al. (170 additional authors not shown)
Abstract:
The Hitomi SXS spectrum of the Perseus cluster, with $\sim$5 eV resolution in the 2-9 keV band, offers an unprecedented benchmark of the atomic modeling and database for hot collisional plasmas. It reveals both successes and challenges of the current atomic codes. The latest versions of AtomDB/APEC (3.0.8), SPEX (3.03.00), and CHIANTI (8.0) all provide reasonable fits to the broad-band spectrum, a…
▽ More
The Hitomi SXS spectrum of the Perseus cluster, with $\sim$5 eV resolution in the 2-9 keV band, offers an unprecedented benchmark of the atomic modeling and database for hot collisional plasmas. It reveals both successes and challenges of the current atomic codes. The latest versions of AtomDB/APEC (3.0.8), SPEX (3.03.00), and CHIANTI (8.0) all provide reasonable fits to the broad-band spectrum, and are in close agreement on best-fit temperature, emission measure, and abundances of a few elements such as Ni. For the Fe abundance, the APEC and SPEX measurements differ by 16%, which is 17 times higher than the statistical uncertainty. This is mostly attributed to the differences in adopted collisional excitation and dielectronic recombination rates of the strongest emission lines. We further investigate and compare the sensitivity of the derived physical parameters to the astrophysical source modeling and instrumental effects. The Hitomi results show that an accurate atomic code is as important as the astrophysical modeling and instrumental calibration aspects. Substantial updates of atomic databases and targeted laboratory measurements are needed to get the current codes ready for the data from the next Hitomi-level mission.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Hitomi Observations of the LMC SNR N132D: Highly Redshifted X-ray Emission from Iron Ejecta
Authors:
Hitomi Collaboration,
Felix Aharonian,
Hiroki Akamatsu,
Fumie Akimoto,
Steven W. Allen,
Lorella Angelini,
Marc Audard,
Hisamitsu Awaki,
Magnus Axelsson,
Aya Bamba,
Marshall W. Bautz,
Roger Blandford,
Laura W. Brenneman,
Gregory V. Brown,
Esra Bulbul,
Edward M. Cackett,
Maria Chernyakova,
Meng P. Chiao,
Paolo S. Coppi,
Elisa Costantini,
Jelle de Plaa,
Cor P. de Vries,
Jan-Willem den Herder,
Chris Done,
Tadayasu Dotani
, et al. (169 additional authors not shown)
Abstract:
We present Hitomi observations of N132D, a young, X-ray bright, O-rich core-collapse supernova remnant in the Large Magellanic Cloud (LMC). Despite a very short observation of only 3.7 ks, the Soft X-ray Spectrometer (SXS) easily detects the line complexes of highly ionized S K and Fe K with 16-17 counts in each. The Fe feature is measured for the first time at high spectral resolution. Based on t…
▽ More
We present Hitomi observations of N132D, a young, X-ray bright, O-rich core-collapse supernova remnant in the Large Magellanic Cloud (LMC). Despite a very short observation of only 3.7 ks, the Soft X-ray Spectrometer (SXS) easily detects the line complexes of highly ionized S K and Fe K with 16-17 counts in each. The Fe feature is measured for the first time at high spectral resolution. Based on the plausible assumption that the Fe K emission is dominated by He-like ions, we find that the material responsible for this Fe emission is highly redshifted at ~800 km/s compared to the local LMC interstellar medium (ISM), with a 90% credible interval of 50-1500 km/s if a weakly informative prior is placed on possible line broadening. This indicates (1) that the Fe emission arises from the supernova ejecta, and (2) that these ejecta are highly asymmetric, since no blue-shifted component is found. The S K velocity is consistent with the local LMC ISM, and is likely from swept-up ISM material. These results are consistent with spatial map** that shows the He-like Fe concentrated in the interior of the remnant and the S tracing the outer shell. The results also show that even with a very small number of counts, direct velocity measurements from Doppler-shifted lines detected in extended objects like supernova remnants are now possible. Thanks to the very low SXS background of ~1 event per spectral resolution element per 100 ks, such results are obtainable during short pointed or slew observations with similar instruments. This highlights the power of high-spectral-resolution imaging observations, and demonstrates the new window that has been opened with Hitomi and will be greatly widened with future missions such as the X-ray Astronomy Recovery Mission (XARM) and Athena.
△ Less
Submitted 6 December, 2017;
originally announced December 2017.