Showing 1–24 of 24 results for author: Imani, M F

Systematic Physics-Compliant Analysis of Over-the-Air Channel Equalization in RIS-Parametrized Wireless Networks-on-Chip

Authors: Jean Tapie, Hugo Prod'homme, Mohammadreza F. Imani, Philipp del Hougne

Abstract: Wireless networks-on-chip (WNoCs) are an enticing complementary interconnect technology for multi-core chips but face severe resource constraints. Being limited to simple on-off-keying modulation, the reverberant nature of the chip enclosure imposes limits on allowed modulation speeds in sight of inter-symbol interference, casting doubts on the competitiveness of WNoCs as interconnect technology.… ▽ More Wireless networks-on-chip (WNoCs) are an enticing complementary interconnect technology for multi-core chips but face severe resource constraints. Being limited to simple on-off-keying modulation, the reverberant nature of the chip enclosure imposes limits on allowed modulation speeds in sight of inter-symbol interference, casting doubts on the competitiveness of WNoCs as interconnect technology. Fortunately, this vexing problem was recently overcome by parametrizing the on-chip radio environment with a reconfigurable intelligent surface (RIS). By suitably configuring the RIS, selected channel impulse responses (CIRs) can be tuned to be (almost) pulse-like despite rich scattering thanks to judiciously tailored multi-bounce path interferences. However, the exploration of this "over-the-air" (OTA) equalization is thwarted by (i) the overwhelming complexity of the propagation environment, and (ii) the non-linear dependence of the CIR on the RIS configuration, requiring a costly and lengthy full-wave simulation for every optimization step. Here, we show that a reduced-basis physics-compliant model for RIS-parametrized WNoCs can be calibrated with a single full-wave simulation. Thereby, we unlock the possibility of predicting the CIR for any RIS configuration almost instantaneously without any additional full-wave simulation. We leverage this new tool to systematically explore OTA equalization in RIS-parametrized WNoCs regarding the optimal choice of delay time for the RIS-shaped CIR's peak. We also study the simultaneous optimization of multiple on-chip wireless links for broadcasting. Looking forward, the introduced tools will enable the efficient exploration of various types of OTA analog computing in RIS-parametrized WNoCs. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Comments: 10 pages, 7 figures, submitted to an IEEE Journal

Simultaneous Transmitting and Reflecting (STAR)-RIS for Harmonious Millimeter Wave Spectrum Sharing

Authors: Omar Hashash, Walid Saad, Mohammadreza F. Imani, David R. Smith

Abstract: The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challeng… ▽ More The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spectrum sharing demands. In this paper, a novel simultaneous transmitting and reflecting RIS (STAR-RIS)-aided solution to enable mmWave spectrum sharing is proposed. In particular, the transmitting and reflecting abilities of the STAR-RIS are leveraged to tackle the mmWave spectrum sharing and QoS requirements separately. The STAR-RIS-enabled spectrum sharing problem between a primary network (e.g. a radar transmit-receive pair) and a secondary network is formulated as an optimization problem whose goal is to maximize the downlink sum-rate over a secondary multiple-input-single-output (MISO) network, while limiting interference over a primary network. Moreover, the STAR-RIS response coefficients and beamforming matrix in the secondary network are jointly optimized. To solve this non-convex problem, an alternating iterative algorithm is employed, where the STAR-RIS response coefficients and beamforming matrix are obtained using the successive convex approximation method. Simulation results show that the proposed solution outperforms conventional RIS schemes for mmWave spectrum sharing by achieving a 14.57% spectral efficiency gain. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Channel Estimation with Hybrid Reconfigurable Intelligent Metasurfaces

Authors: Haiyang Zhang, Nir Shlezinger, George C Alexandropoulos, Idban Alamzadeh, Mohammadreza F Imani, Yonina C Eldar

Abstract: Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as almost passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including the inherent difficulty in estimating the underlying wireless ch… ▽ More Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as almost passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including the inherent difficulty in estimating the underlying wireless channels. In this paper, we focus on the recently conceived concept of Hybrid Reconfigurable Intelligent Surfaces (HRISs), which do not solely reflect the im**ing waveform in a controllable fashion, but are also capable of sensing and processing an adjustable portion of it. We first present implementation details for this metasurface architecture and propose a convenient mathematical model for characterizing its dual operation. As an indicative application of HRISs in wireless communications, we formulate the individual channel estimation problem for the uplink of a multi-user HRIS-empowered communication system. Considering first a noise-free setting, we theoretically quantify the advantage of HRISs in notably reducing the amount of pilots needed for channel estimation, as compared to the case of purely reflective RISs. We then present closed-form expressions for the MSE performance in estimating the individual channels at the HRISs and the base station for the noisy model. Based on these derivations, we propose an automatic differentiation-based first-order optimization approach to efficiently determine the HRIS phase and power splitting configurations for minimizing the weighted sum-MSE performance. Our numerical evaluations demonstrate that HRISs do not only enable the estimation of the individual channels in HRIS-empowered communication systems, but also improve the ability to recover the cascaded channel, as compared to existing methods using passive and reflective RISs. △ Less

Submitted 11 August, 2022; v1 submitted 8 June, 2022; originally announced June 2022.

Comments: This work has been submitted to the IEEE for possible publication. arXiv admin note: text overlap with arXiv:2202.05673

Channel Estimation with Simultaneous Reflecting and Sensing Reconfigurable Intelligent Metasurfaces

Authors: Haiyang Zhang, Nir Shlezinger, Idban Alamzadeh, George C. Alexandropoulos, Mohammadreza F. Imani, Yonina C. Eldar

Abstract: Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as nearly passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including an inherent difficulty in estimating the underlying wireless cha… ▽ More Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as nearly passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including an inherent difficulty in estimating the underlying wireless channels. In this paper, we propose the concept of Hybrid RISs (HRISs), which do not solely reflect the im**ing waveform in a controllable fashion, but are also capable of sensing and processing a portion of it via some active reception elements. We first present implementation details for this novel metasurface architecture and propose a simple model for its operation, when considered for wireless communications. As an indicative application of HRISs, we formulate and solve the individual channels identification problem for the uplink of multi-user HRIS-empowered systems. Our numerical results showcase that, in the high signal-to-noise regime, HRISs enable individual channel estimation with notably reduced amounts of pilots, compared to those needed when using a purely reflective RIS that can only estimate the cascaded channel. △ Less

Submitted 11 February, 2022; originally announced February 2022.

Comments: This work has been presented at the 2021 IEEE SPAWC

PhysFad: Physics-Based End-to-End Channel Modeling of RIS-Parametrized Environments with Adjustable Fading

Authors: Rashid Faqiri, Chloé Saigre-Tardif, George C. Alexandropoulos, Nir Shlezinger, Mohammadreza F. Imani, Philipp del Hougne

Abstract: Programmable radio environments parametrized by reconfigurable intelligent surfaces (RISs) are emerging as a new wireless communications paradigm, but currently used channel models for the design and analysis of signal-processing algorithms cannot include fading in a manner that is faithful to the underlying wave physics. To overcome this roadblock, we introduce a physics-based end-to-end model of… ▽ More Programmable radio environments parametrized by reconfigurable intelligent surfaces (RISs) are emerging as a new wireless communications paradigm, but currently used channel models for the design and analysis of signal-processing algorithms cannot include fading in a manner that is faithful to the underlying wave physics. To overcome this roadblock, we introduce a physics-based end-to-end model of RIS-parametrized wireless channels with adjustable fading (coined PhysFad) which is based on a first-principles coupled-dipole formalism. PhysFad naturally incorporates the notions of space and causality, dispersion (i.e., frequency selectivity) and the intertwinement of each RIS element's phase and amplitude response, as well as any arising mutual coupling effects including long-range mesoscopic correlations. PhysFad offers the to-date missing tuning knob for adjustable fading. We thoroughly characterize PhysFad and demonstrate its capabilities for a prototypical problem of RIS-enabled over-the-air channel equalization in rich-scattering wireless communications. We also share a user-friendly version of our code to help the community transition towards physics-based models with adjustable fading. △ Less

Submitted 5 February, 2022; originally announced February 2022.

Comments: 30 pages, 7 figures, submitted to an IEEE Journal

Journal ref: IEEE Trans. Wirel. Commun. 22, 580-595 (2023)

Wideband Multi-User MIMO Communications with Frequency Selective RISs: Element Response Modeling and Sum-Rate Maximization

Authors: Konstantinos D. Katsanos, Nir Shlezinger, Mohammadreza F. Imani, George C. Alexandropoulos

Abstract: Reconfigurable Intelligent Surfaces (RISs) are an emerging technology for future wireless communication systems, enabling improved coverage in an energy efficient manner. RISs are usually metasurfaces, constituting of two-dimensional arrangements of metamaterial elements, whose individual response is commonly modeled in the literature as an adjustable phase shifter. However, this model holds only… ▽ More Reconfigurable Intelligent Surfaces (RISs) are an emerging technology for future wireless communication systems, enabling improved coverage in an energy efficient manner. RISs are usually metasurfaces, constituting of two-dimensional arrangements of metamaterial elements, whose individual response is commonly modeled in the literature as an adjustable phase shifter. However, this model holds only for narrowband communications, and when wideband transmissions are utilized, one has to account for the frequency selectivity of metamaterials, whose response usually follows a Lorentzian-like profile. In this paper, we consider the uplink of a wideband RIS-empowered multi-user Multiple-Input Multiple-Output (MIMO) wireless system with Orthogonal Frequency Division Multiplexing (OFDM) signaling, while accounting for the frequency selectivity of RISs. In particular, we focus on designing the controllable parameters dictating the Lorentzian response of each RIS metamaterial element, in order to maximize the achievable sum rate. We devise a scheme combining block coordinate descent with penalty dual decomposition to tackle the resulting challenging optimization framework. Our simulation results reveal the achievable rates one can achieve using realistically frequency selective RISs in wideband settings, and quantify the performance loss that occurs when using state-of-the-art methods which assume that the RIS elements behave as frequency-flat phase shifters. △ Less

Submitted 25 March, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

Comments: 6 pages; 4 figures; to be presented in IEEE ICC 2022

Near-Field Wireless Power Transfer with Dynamic Metasurface Antennas

Authors: Haiyang Zhang, Nir Shlezinger, Francesco Guidi, Davide Dardari, Mohammadreza F Imani, Yonina C Eldar

Abstract: Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, ar… ▽ More Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, are employed, WPT might take place in the radiating near-field (Fresnel) region where spherical wave propagation holds, rather than plane wave propagation as in the far-field. In this paper, we study WPT systems charging multiple devices in the Fresnel region, where the energy transmitter is equipped with an emerging DMA, exploring how the antenna configuration can exploit the spherical wavefront to generate focused energy beams. In particular, after presenting a mathematical model for DMA-based radiating near-field WPT systems, we characterize the weighted sum-harvested energy maximization problem of the considered system, and we propose an efficient solution to jointly design the DMA weights and digital precoding vector. Simulation results show that our design generates focused energy beams that are capable of improving energy transfer efficiency in the radiating near-field with minimal energy pollution. △ Less

Submitted 10 October, 2021; originally announced October 2021.

Comments: This work has been submitted to the IEEE for possible publication

Metasurface-Programmable Wireless Network-on-Chip

Authors: Mohammadreza F. Imani, Sergi Abadal, Philipp del Hougne

Abstract: We introduce the concept of smart radio environments, currently intensely studied for wireless communication in metasurface-programmable meter-scaled environments (e.g., inside rooms), on the chip scale. Wireless networks-on-chips (WNoCs) are a candidate technology to improve inter-core communication on chips but current proposals are plagued by a dilemma: either the received signal is weak, or it… ▽ More We introduce the concept of smart radio environments, currently intensely studied for wireless communication in metasurface-programmable meter-scaled environments (e.g., inside rooms), on the chip scale. Wireless networks-on-chips (WNoCs) are a candidate technology to improve inter-core communication on chips but current proposals are plagued by a dilemma: either the received signal is weak, or it is significantly reverberated such that the on-off-keying modulation speed must be throttled. Here, we overcome this vexing problem by endowing the wireless on-chip environment with in situ programmability which allows us to shape the channel impulse response (CIR); thereby, we can impose a pulse-like CIR shape despite strong multipath propagation and without entailing a reduced received signal strength. First, we design and characterize a programmable metasurface suitable for integration in the on-chip environment ("on-chip reconfigurable intelligent surface"). Second, we optimize its configuration to equalize selected wireless on-chip channels "over the air". Third, by conducting a rigorous communication analysis, we evidence the feasibility of significantly higher modulation speeds with shaped CIRs. Our results introduce a programmability paradigm to WNoCs which boosts their competitiveness as complementary on-chip interconnect solution. △ Less

Submitted 13 March, 2022; v1 submitted 7 September, 2021; originally announced September 2021.

Comments: 15 pages including 8 figures

Journal ref: Adv. Sci. TBD, 2201458 (2022)

Near-field Wireless Power Transfer for 6G Internet-of-Everything Mobile Networks: Opportunities and Challenges

Authors: Haiyang Zhang, Nir Shlezinger, Francesco Guidi, Davide Dardari, Mohammadreza F. Imani, Yonina C. Eldar

Abstract: Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming t… ▽ More Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequencies combined with the usage of large-scale antennas, future WPT devices are likely to operate in the radiating near-field (Fresnel) region. In this article, we provide an overview of the opportunities and challenges which arise from radiating near-field WPT. In particular, we discuss about the possibility to realize beam focusing in near-field radiating conditions, and highlight its possible implications for WPT in future {IoE} networks. Besides, we overview some of the design challenges and research directions which arise from this emerging paradigm, including its simultaneous operation with wireless communications, radiating waveform considerations, hardware aspects, and operation with typical antenna architectures. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Comments: This work has been submitted to the IEEE for possible publication

Beam Focusing for Near-Field Multi-User MIMO Communications

Authors: Haiyang Zhang, Nir Shlezinger, Francesco Guidi, Davide Dardari, Mohammadreza F. Imani, Yonina C. Eldar

Abstract: Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user… ▽ More Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user downlink multiple-input multiple-output (MIMO) systems. As the ability to achieve beam focusing is dictated by the transmit antenna, we study near-field signaling considering different antenna structures, including fully-digital architectures, hybrid phase shifter-based precoders, and the emerging dynamic metasurface antenna (DMA) architecture for massive MIMO arrays. We first provide a mathematical model to characterize near-field wireless channels as well as the transmission pattern for the considered antenna architectures. Then, we formulate the beam focusing problem for the goal of maximizing the achievable sum-rate in multi-user networks. We propose efficient solutions based on the sum-rate maximization task for fully-digital, (phase shifters based-) hybrid and DMA architectures. Simulation results show the feasibility of the proposed beam focusing scheme for both single- and multi-user scenarios. In particular, the designed focused beams are such that users residing at the same angular direction can communicate reliably without interfering with each other, which is not achievable using conventional far-field beam steering. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Comments: This work has been submitted to the IEEE for possible publication

Hybrid Reconfigurable Intelligent Metasurfaces: Enabling Simultaneous Tunable Reflections and Sensing for 6G Wireless Communications

Authors: George C. Alexandropoulos, Nir Shlezinger, Idban Alamzadeh, Mohammadreza F. Imani, Haiyang Zhang, Yonina C. Eldar

Abstract: The latest discussions on the upcoming sixth Generation (6G) of wireless communications are envisioning future networks as a unified communications, sensing, and computing platform. The recently conceived concept of the smart radio environment, enabled by Reconfigurable Intelligent Surfaces (RISs), contributes towards this vision offering programmable propagation of information-bearing signals. Ty… ▽ More The latest discussions on the upcoming sixth Generation (6G) of wireless communications are envisioning future networks as a unified communications, sensing, and computing platform. The recently conceived concept of the smart radio environment, enabled by Reconfigurable Intelligent Surfaces (RISs), contributes towards this vision offering programmable propagation of information-bearing signals. Typical RIS implementations include metasurfaces with almost passive unit elements capable of reflecting their incident waves in controllable ways. However, this solely reflective operation induces significant challenges for the RIS optimization from the wireless network orchestrator. For example, RISs lack information to locally tune their reflection pattern, which can only be acquired by other network entities, and then shared with the RIS controller. Furthermore, channel estimation, which is essential for coherent RIS-empowered communications, is challenging with the available RIS designs. This article reviews the emerging concept of Hybrid reflecting and sensing RISs (HRISs), which enables metasurfaces to reflect the im**ing signal in a controllable manner, while simultaneously sensing a portion of it. The sensing capability of HRISs facilitates various network management functionalities, including channel parameter estimation and localization, while giving rise to potentially computationally autonomous and self-configuring metasurfaces. We discuss a hardware design for HRISs and detail a full-wave electromagnetic proof of concept. The distinctive properties of HRISs, in comparison to their solely reflective counterparts, are highlighted and a simulation study evaluating their capability for performing full and parametric channel estimation is presented. Future research challenges and opportunities arising from the HRIS concept are also included. △ Less

Submitted 22 September, 2023; v1 submitted 10 April, 2021; originally announced April 2021.

Comments: 8 pages, 6 figures, IEEE magazine

Electronically Steered Nyquist Metasurface Antenna

Authors: Michael Boyarsky, Timothy Sleasman, Mohammadreza F. Imani, Jonah N. Gollub, David R. Smith

Abstract: Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight cir… ▽ More Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight circuit board with varactor-tuned elements. Distinct from previous metasurfaces (which require dense element spacing), the proposed design uses Nyquist spatial sampling of half a wavelength. We detail the design of this Nyquist metasurface antenna and experimentally validate its ability to electronically steer in two directions. Nyquist metasurface antennas can realize high performance without costly and power hungry phase shifters, making them a compelling technology for future antenna hardware. △ Less

Submitted 3 July, 2020; originally announced July 2020.

Dynamic Metasurface Antennas for 6G Extreme Massive MIMO Communications

Authors: Nir Shlezinger, George C. Alexandropoulos, Mohammadreza F. Imani, Yonina C. Eldar, David R. Smith

Abstract: Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in t… ▽ More Next generation wireless base stations and access points will transmit and receive using extremely massive numbers of antennas. A promising technology for realizing such massive arrays in a dynamically controllable and scalable manner with reduced cost and power consumption utilizes surfaces of radiating metamaterial elements, known as metasurfaces. To date, metasurfaces are mainly considered in the context of wireless communications as passive reflecting devices, aiding conventional transceivers in sha** the propagation environment. This article presents an alternative application of metasurfaces for wireless communications as active reconfigurable antennas with advanced analog signal processing capabilities for next generation transceivers. We review the main characteristics of metasurfaces used for radiation and reception, and analyze their main advantages as well as their effect on the ability to reliably communicate in wireless networks. As current studies unveil only a portion of the potential of metasurfaces, we detail a list of exciting research and implementation challenges which arise from the application of metasurface antennas for wireless transceivers. △ Less

Submitted 16 June, 2020; v1 submitted 14 June, 2020; originally announced June 2020.

Perfect Absorption in a Metasurface-Programmable Complex Scattering Enclosure

Authors: Mohammadreza F. Imani, David R. Smith, Philipp del Hougne

Abstract: Achieving the very special condition of perfect absorption (PA) in a complex scattering enclosure promises to enable a wealth of applications in secure communication, precision sensing, wireless power transfer, analog signal processing and random lasing. Consequently, a lot of recent research effort was dedicated to proposing wave-front sha** protocols to implement coherent PA in a complex scatt… ▽ More Achieving the very special condition of perfect absorption (PA) in a complex scattering enclosure promises to enable a wealth of applications in secure communication, precision sensing, wireless power transfer, analog signal processing and random lasing. Consequently, a lot of recent research effort was dedicated to proposing wave-front sha** protocols to implement coherent PA in a complex scattering environment. Here, instead of sha** the im**ing wave front and tuning the system's attenuation, we propose the conceptually different route of solely tweaking the randomness of the complex scattering environment in order to achieve PA. We provide an experimental proof-of-concept in the microwave domain where we tune the randomness of a three-dimensional chaotic cavity with a programmable metasurface. We systematically investigate the achievability and extreme sensitivity of the PA condition. Our technique can impose a PA condition at over hundred distinct frequencies within a small frequency band, which allows us to propose and experimentally demonstrate a concrete practical application: receiver-powered secure wireless communication in a complex scattering enclosure. Our fundamentally new perspective on PA is applicable to all types of wave phenomena and our results foreshadow the large potential of this novel tool for minute wave control in sensing, communication and energy transfer. △ Less

Submitted 11 June, 2020; v1 submitted 29 February, 2020; originally announced March 2020.

Comments: Original version of the manuscript submitted for peer review; 21 pages, 3 figures; Supplementary Information with 18 pages is included at the end of the file; source files in Word format have been converted to PDF

Journal ref: Adv. Funct. Mater. 30, 2005310 (2020)

Dynamic Metasurface Antennas for MIMO-OFDM Receivers with Bit-Limited ADCs

Authors: Hanqing Wang, Nir Shlezinger, Yonina C. Eldar, Shi **, Mohammadreza F. Imani, Insang Yoo, David R. Smith

Abstract: The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in… ▽ More The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers are expected to utilize a massive number of antennas, operate in dynamic environments, and explore high frequency bands, while satisfying strict constraints in terms of cost, power, and size. An emerging technology to realize massive MIMO receivers of reduced cost and power consumption is based on dynamic metasurface antennas (DMAs), which inherently implement controllable compression in acquisition. In this work we study the application of DMAs for MIMO-OFDM receivers operating with bit-constrained analog-to-digital converters (ADCs). We present a model for DMAs which accounts for the configurable frequency selective profile of its metamaterial elements, resulting in a spectrally flexible hybrid structure. We then exploit previous results in task-based quantization to show how DMAs can be configured to improve recovery in the presence of constrained ADCs, and propose methods for adjusting the DMA parameters based on channel state information. Our numerical results demonstrate that the DMA-based receiver is capable of accurately recovering OFDM signals. In particular, we show that by properly exploiting the spectral diversity of DMAs, notable performance gains are obtained over existing designs of conventional hybrid architectures, demonstrating the potential of DMAs for MIMO-OFDM setups in realizing high performance massive antenna arrays of reduced cost and power consumption. △ Less

Submitted 14 December, 2019; originally announced December 2019.

Implementation and Characterization of a Two-Dimensional Printed Circuit Dynamic Metasurface Aperture for Computational Microwave Imaging

Authors: Timothy Sleasman, Mohammadreza F. Imani, Aaron V. Diebold, Michael Boyarsky, Kenneth P. Trofatter, David R. Smith

Abstract: We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circui… ▽ More We present the design, fabrication, and experimental characterization of a two-dimensional, dynamically tuned, metasurface aperture, emphasizing its potential performance in computational imaging applications. The dynamic metasurface aperture (DMA) consists of an irregular, planar cavity that feeds a multitude of tunable metamaterial elements, all fabricated in a compact, multilayer printed circuit board process. The design considerations for the metamaterial element as a tunable radiator, the associated biasing circuitry, as well as cavity parameters are examined and discussed. A sensing matrix can be constructed from the measured transmit patterns, the singular value spectrum of which provides insight into the information capacity of the apertures. We investigate the singular value spectra of the sensing matrix over a variety of operating parameters, such as the number of metamaterial elements, number of masks, and number of radiating elements. After optimizing over these key parameters, we demonstrate computational microwave imaging of simple test objects. △ Less

Submitted 20 October, 2019; originally announced November 2019.

Artificial Neural Network with Physical Dynamic Metasurface Layer for Optimal Sensing

Authors: Philipp del Hougne, Mohammadreza F. Imani, Aaron V. Diebold, Roarke Horstmeyer, David R. Smith

Abstract: We address the fundamental question of how to optimally probe a scene with electromagnetic (EM) radiation to yield a maximum amount of information relevant to a particular task. Machine learning (ML) techniques have emerged as powerful tools to extract task-relevant information from a wide variety of EM measurements, ranging from optics to the microwave domain. However, given the ability to active… ▽ More We address the fundamental question of how to optimally probe a scene with electromagnetic (EM) radiation to yield a maximum amount of information relevant to a particular task. Machine learning (ML) techniques have emerged as powerful tools to extract task-relevant information from a wide variety of EM measurements, ranging from optics to the microwave domain. However, given the ability to actively illuminate a particular scene with a programmable EM wavefront, it is often not clear what wavefronts optimally encode information for the task at hand (e.g., object detection, classification). Here, we show that by integrating a physical model of scene illumination and detection into a ML pipeline, we can jointly learn optimal sampling and measurement processing strategies for a given task. We consider in simulation the example of classifying objects using microwave radiation produced by dynamic metasurfaces. By integrating an analytical forward model describing the metamaterial elements as coupled dipoles into the ML pipeline, we jointly train analog model weights with digital neural network weights. The learned non-intuitive illumination settings yield a higher classification accuracy using fewer measurements. On the practical level, these results are highly relevant to emerging context-aware systems such as autonomous vehicles, touchless human-interactive devices or within smart health care, where strict time constraints place severe limits on measurement strategies. On the conceptual level, our work serves as a bridge between wavefront sha** and tunable metasurface design on the physical layer and ML techniques on the processing layer. △ Less

Submitted 24 June, 2019; originally announced June 2019.

Comments: 14 pages including 5 figures + 6 pages Supplemental Material

Journal ref: Adv. Sci. 1901913 (2019)

Grating Lobe Suppression in Metasurface Antenna Arrays with a Waveguide Feed Layer

Authors: Michael Boyarsky, Mohammadreza F. Imani, David R. Smith

Abstract: Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained wit… ▽ More Metasurface antenna arrays, formed by tiling multiple metasurface subapertures, offer an alternative architecture to electrically large beamsteering arrays often used in radar and communications. The advantages offered by metasurfaces are enabled by the use of passive, tunable radiating elements. While these metamaterial elements do not exhibit the full range of phase tuning as can be obtained with phase shifters, they can be engineered to provide a similar level of performance with much lower power requirements and circuit complexity. Due to the limited phase and magnitude control, however, larger metasurface apertures can be susceptible to strong grating lobes which result from an unwanted periodic magnitude response that accompanies an ideal phase pattern. In this work, we combine antenna theory with analytical modeling of metamaterial elements to mathematically reveal the source of such grating lobes. To circumvent this problem, we introduce a compensatory waveguide feed layer designed to suppress grating lobes in metasurface antennas. The waveguide feed layer helps metasurface antennas approach the performance of phased arrays from an improved hardware platform, poising metasurface antennas to impact a variety of beamforming applications. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Dynamic Metasurface Antennas for Uplink Massive MIMO Systems

Authors: Nir Shlezinger, Or Dicker, Yonina C. Eldar, Insang Yoo, Mohammadreza F. Imani, David R. Smith

Abstract: Massive multiple-input multiple-output (MIMO) communications are the focus of considerable interest in recent years. While the theoretical gains of massive MIMO have been established, implementing MIMO systems with large-scale antenna arrays in practice is challenging. Among the practical challenges associated with massive MIMO systems are increased cost, power consumption, and physical size. In t… ▽ More Massive multiple-input multiple-output (MIMO) communications are the focus of considerable interest in recent years. While the theoretical gains of massive MIMO have been established, implementing MIMO systems with large-scale antenna arrays in practice is challenging. Among the practical challenges associated with massive MIMO systems are increased cost, power consumption, and physical size. In this work we study the implementation of massive MIMO antenna arrays using dynamic metasurface antennas (DMAs), an emerging technology which inherently handles the aforementioned challenges. Specifically, DMAs realize large-scale planar antenna arrays, and can adaptively incorporate signal processing methods such as compression and analog combining in the physical antenna structure, thus reducing the cost and power consumption. We first propose a mathematical model for massive MIMO systems with DMAs and discuss their constraints compared to ideal antenna arrays. Then, we characterize the fundamental limits of uplink communications with the resulting systems, and propose two algorithms for designing practical DMAs for approaching these limits. Our numerical results indicate that the proposed approaches result in practical massive MIMO systems whose performance is comparable to that achievable with ideal antenna arrays. △ Less

Submitted 30 June, 2019; v1 submitted 5 January, 2019; originally announced January 2019.

Analytical Modeling of a Two-Dimensional Waveguide-Fed Metasurface

Authors: Laura Pulido-Mancera, Mohammadreza F. Imani, Patrick T. Bowen, Nathan Kundtz, David R. Smith

Abstract: We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating elemen… ▽ More We develop a fast, accurate, and robust technique to model the electromagnetic response of a two-dimensional (2D) waveguide-fed metasurface aperture. The geometry under consideration consists of a parallel-plate waveguide with an array of subwavelength, complementary metamaterial elements patterned into one of the conducting surfaces. To determine the radiated field, we model each radiating element as a polarizable dipole, and account for mutual interactions among elements via guided and radiated fields by applying a coupled dipole framework. Using full-wave simulations of parallel-plate waveguides with two types of metamaterial elements, we confirm the validity of the proposed coupled dipole model and demonstrate the ability to predict radiation patterns corresponding to arbitrarily arranged elements. We explore the importance of including the mutual coupling among metamaterial elements to arrive at accurate field predictions. The coupled dipole modeling framework presented is scalable to extremely large apertures and can form the foundation for a general, efficient, yet simple aperture analysis and synthesis tool. △ Less

Submitted 30 July, 2018; originally announced July 2018.

Comments: 14 pages, 12 figures

Polarizability Extraction for Waveguide-Fed Metasurfaces

Authors: Laura Pulido-Mancera, Patrick T. Bowen, Nathan Kundtz, Mohammadreza F. Imani, David Smith

Abstract: We consider the design and modeling of metasurfaces that couple energy from guided waves to propagating wavefronts. This is a first step towards a comprehensive, multiscale modeling platform for metasurface antennas-large arrays of metamaterial elements embedded in a waveguide structure that radiates into free-space--in which the detailed electromagnetic responses of metamaterial elements are repl… ▽ More We consider the design and modeling of metasurfaces that couple energy from guided waves to propagating wavefronts. This is a first step towards a comprehensive, multiscale modeling platform for metasurface antennas-large arrays of metamaterial elements embedded in a waveguide structure that radiates into free-space--in which the detailed electromagnetic responses of metamaterial elements are replaced by polarizable dipoles. We present two methods to extract the effective polarizability of a metamaterial element embedded in a one- or two-dimensional waveguide. The first method invokes surface equivalence principles, averaging over the effective surface currents and charges within an element to obtain the effective dipole moments; the second method is based on computing the coefficients of the scattered waves within the waveguide, from which the effective polarizability can be inferred. We demonstrate these methods on several variants of waveguide-fed metasurface elements, finding excellent agreement between the two, as well as with analytical expressions derived for irises with simpler geometries. Extending the polarizability extraction technique to higher order multipoles, we confirm the validity of the dipole approximation for common metamaterial elements. With the effective polarizabilities of the metamaterial elements accurately determined, the radiated fields generated by a metasurface antenna (inside and outside the antenna) can be found self-consistently by including the interactions between polarizable dipoles. The dipole description provides an alternative language and computational framework for engineering metasurface antennas, holograms, lenses, beam-forming arrays, and other electrically large, waveguide-fed metasurface structures. △ Less

Submitted 27 July, 2017; originally announced August 2017.

Journal ref: Phys. Rev. B 96, 235402 (2017)

Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures

Authors: Timothy Sleasman, Michael Boyarsky, Mohammadreza F. Imani, Thomas Fromenteze, Jonah N. Gollub, David R. Smith

Abstract: Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying… ▽ More Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying on bandwidth can create difficulties in calibration, alignment, and imaging of dispersive objects. We present an alternative approach using an electrically-large, dynamically reconfigurable, metasurface antenna that generates spatially-distinct radiation patterns as a function of tuning state. The metasurface antenna comprises a waveguide feeding an array of metamaterial radiators, each of whose properties can be modified by applying a voltage to a diode integrated into the element. By deploying two of these apertures, one as the transmitter and one as the receiver, we realize sufficient spatial diversity to alleviate the dependence on frequency bandwidth and obtain both range and cross-range information using measurements at a single frequency. We demonstrate the method experimentally, using one-dimensional dynamic metasurface apertures and reconstructing various two-dimensional scenes (range and cross-range). Furthermore, we modify a conventional microwave imaging technique---the range migration algorithm---to be compatible with such configurations, resulting in an imaging system that is fast and simple in both software and hardware. The imaging scheme presented in this paper has broad application to radio frequency imaging, including security screening, through-wall imaging, biomedical diagnostics, and synthetic aperture radar. △ Less

Submitted 7 August, 2017; v1 submitted 27 March, 2017; originally announced April 2017.

Journal ref: JOSA B 4 (2017) 1713-1726

Experimental Synthetic Aperture Radar with Dynamic Metasurfaces

Authors: Timothy Sleasman, Michael Boyarsky, Laura Pulido-Mancera, Thomas Fromenteze, Mohammadreza F. Imani, Matthew Reynolds, David R. Smith

Abstract: We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a one-dimensional microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band… ▽ More We investigate the use of a dynamic metasurface as the transmitting antenna for a synthetic aperture radar (SAR) imaging system. The dynamic metasurface consists of a one-dimensional microstrip waveguide with complementary electric resonator (cELC) elements patterned into the upper conductor. Integrated into each of the cELCs are two diodes that can be used to shift each cELC resonance out of band with an applied voltage. The aperture is designed to operate at K band frequencies (17.5 to 20.3 GHz), with a bandwidth of 2.8 GHz. We experimentally demonstrate imaging with a fabricated metasurface aperture using existing SAR modalities, showing image quality comparable to traditional antennas. The agility of this aperture allows it to operate in spotlight and stripmap SAR modes, as well as in a third modality inspired by computational imaging strategies. We describe its operation in detail, demonstrate high-quality imaging in both 2D and 3D, and examine various trade-offs governing the integration of dynamic metasurfaces in future SAR imaging platforms. △ Less

Submitted 23 February, 2017; originally announced March 2017.

Optimization of Bloom Filter Parameters for Practical Bloom Filter Based Epidemic Forwarding in DTNs

Authors: Ali Marandi, Mahdi Faghi Imani, Kave Salamatian

Abstract: Epidemic forwarding has been proposed as a forwarding technique to achieve opportunistic communication in Delay Tolerant Networks. Even if this technique is well known and widely referred, one has to first deal with several practical problems before using it. In particular, in order to manage the redundancy and to avoid useless transmissions, it has been proposed to ask nodes to exchange informati… ▽ More Epidemic forwarding has been proposed as a forwarding technique to achieve opportunistic communication in Delay Tolerant Networks. Even if this technique is well known and widely referred, one has to first deal with several practical problems before using it. In particular, in order to manage the redundancy and to avoid useless transmissions, it has been proposed to ask nodes to exchange information about the buffer content prior to sending information. While Bloom filter has been proposed to transport the buffer content information, up to our knowledge no real evaluation has been provided to study the tradeoff that exists in practice. In this paper we describe an implementation of an epidemic forwarding scheme using Bloom filters. Then we propose some strategies for Bloom filter management based on windowing and describe implementation tradeoffs. By simulating our proposed strategies in ns-3 both with random waypoint mobility and realistic mobility traces coming from San Francisco taxicabs, we show that our proposed strategies alleviate the challenge of using epidemic forwarding in DTNs. △ Less

Submitted 19 August, 2012; originally announced August 2012.