Showing 1–25 of 25 results for author: Ilchenko, V S

Engineered zero-dispersion microcombs using CMOS-ready photonics

Authors: Qing-Xin Ji, Warren **, Lue Wu, Yan Yu, Zhiquan Yuan, Wei Zhang, Maodong Gao, Bohan Li, Heming Wang, Chao Xiang, Joel Guo, Avi Feshali, Mario Paniccia, Vladimir S. Ilchenko, Andrey B. Matsko, John Bowers, Kerry Vahala

Abstract: Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, w… ▽ More Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, we report the development of a microresonator in which GVD is reduced due to a couple-ring resonator configuration. Operating in the turnkey self-injection-locking mode, the resonator is hybridly integrated with a semiconductor laser pump to produce high-power-efficiency combs spanning a bandwidth of 9.9 nm (1.22 THz) centered at 1560 nm, corresponding to 62 comb lines. Fast, linear optical sampling of the comb waveform is used to observe the rich set of near-zero GVD comb behaviors, including soliton molecules, switching waves (platicons) and their hybrids. Tuning of the 20 GHz repetition rate by electrical actuation enables servo locking to a microwave reference, which simultaneously stabilizes the comb repetition rate, offset frequency and temporal waveform. This hybridly integrated system could be used in coherent communications or for ultra-stable microwave signal generation by two-point optical frequency division. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 8 pages, 4 figures

Generation of Kerr combs centered at 4.5μm in crystalline microresonators pumped by quantum cascade lasers

Authors: Anatoliy A. Savchenkov, Vladimir. S. Ilchenko, Fabio Di Teodoro, Paul M. Belden, William T. Lotshaw, Andrey B. Matsko, Lute Maleki

Abstract: We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 r… ▽ More We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 resonator characterized with quality factor exceeding 10$^8$. △ Less

Submitted 31 May, 2015; originally announced June 2015.

Comments: 5 pages, 5 figures

Compact Stabilized Semiconductor Laser for Frequency Metrology

Authors: W. Liang, V. S. Ilchenko, D. Eliyahu, E. Dale, A. A. Savchenkov, D. Seidel, A. B. Matsko, L. Maleki

Abstract: We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude modulation below -80 dB and frequency noise better than 300 Hz/Hz^(1/2) at offset frequencies ranging from 100 Hz to 10 MHz. The frequency modulation (FM) speed and span… ▽ More We report on the development of a frequency modulatable 795 nm semiconductor laser based on self-injection locking to a high quality factor whispering gallery mode microresonator. The laser is characterized with residual amplitude modulation below -80 dB and frequency noise better than 300 Hz/Hz^(1/2) at offset frequencies ranging from 100 Hz to 10 MHz. The frequency modulation (FM) speed and span of the laser exceed 1 MHz and 4 GHz, respectively. Locking of the laser to Doppler-free saturated absorption resonance of 87Rb D1 line is demonstrated and frequency stability below 10^(-12) is measured for integration time spanning from 1 s to 1 day. The architecture demonstrated in this study is suitable for realization of frequency modulatable lasers at any wavelength. △ Less

Submitted 17 November, 2014; originally announced November 2014.

Comments: 9 pages, 5 figures

Generation of a coherent near-infrared Kerr frequency comb in a monolithic microresonator with normal GVD

Authors: Wei Liang, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, Danny Eliyahu, David Seidel, Andrey B. Matsko, Lute Maleki

Abstract: We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb di… ▽ More We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb differs significantly from the Kerr frequency comb spectra reported previously. We show via numerical simulation that, while the frequency comb does not correspond to generation of short optical pulses, the relative phases of the generated harmonics are fixed. △ Less

Submitted 8 April, 2014; originally announced April 2014.

Comments: 5 pages, 5 figures, to appear in Optics Letters

Crystalline Whispering Gallery Mode Resonators: In Search of The Optimal Material

Authors: V. S. Ilchenko, A. A. Savchenkov, A. B. Matsko, L. Maleki

Abstract: Different applications of crystalline whispering gallery mode resonators call for different properties of the resonator host material. We report on our recent study of resonators made out of sapphire, diamond, and quartz crystals and discuss possible applications of these resonators. In particular, we demonstrate Kerr frequency comb generation in sapphire microresonators. Different applications of crystalline whispering gallery mode resonators call for different properties of the resonator host material. We report on our recent study of resonators made out of sapphire, diamond, and quartz crystals and discuss possible applications of these resonators. In particular, we demonstrate Kerr frequency comb generation in sapphire microresonators. △ Less

Submitted 1 April, 2014; originally announced April 2014.

Comments: Proc. SPIE 8960, Laser Resonators, Microresonators, and Beam Control XVI, 896013 (March 4, 2014)

Spectrally Pure RF Photonic Source Based on a Resonant Optical Hyper-Parametric Oscillator

Authors: W. Liang, D. Eliyahu, A. B. Matsko, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We demonstrate a free running 10GHz microresonator-based RF photonic hyper-parametric oscillator characterized with phase noise better than -60dBc/Hz at 10Hz, -90dBc/Hz at 100Hz, and -150dBc/Hz at 10MHz. The device consumes less than 25mW of optical power. A correlation between the frequency of the continuous wave laser pum** the nonlinear resonator and the generated RF frequency is confirmed. T… ▽ More We demonstrate a free running 10GHz microresonator-based RF photonic hyper-parametric oscillator characterized with phase noise better than -60dBc/Hz at 10Hz, -90dBc/Hz at 100Hz, and -150dBc/Hz at 10MHz. The device consumes less than 25mW of optical power. A correlation between the frequency of the continuous wave laser pum** the nonlinear resonator and the generated RF frequency is confirmed. The performance of the device is compared with the performance of a standard optical fiber based coupled opto-electronic oscillator of OEwaves. △ Less

Submitted 31 March, 2014; originally announced April 2014.

Comments: 9 pages, 8 figures. Wei Liang at al., Proceedings of SPIE Vol. 8960 (SPIE, Bellingham, WA 2014), 896010

On phase noise of self-injection locked semiconductor lasers

Authors: E. Dale, W. Liang, D. Eliyahu, A. A. Savchenkov, V. S. Ilchenko, A. B. Matsko, D. Seidel, L. Maleki

Abstract: We discuss our recent progress in iimproving the phase noise of a semiconductor laser using self-injection locking of to a mode of a high-Q whispering gallery mode resonator. Locking efficiency is analyzed for semiconductor distributed feedback (DFB) as well as Fabry-Perot (FP) lasers operating at 690nm, 1060nm, 1550nm, and 2000nm. Instantaneous linewidth below 300 Hz is realized with telecom DFB… ▽ More We discuss our recent progress in iimproving the phase noise of a semiconductor laser using self-injection locking of to a mode of a high-Q whispering gallery mode resonator. Locking efficiency is analyzed for semiconductor distributed feedback (DFB) as well as Fabry-Perot (FP) lasers operating at 690nm, 1060nm, 1550nm, and 2000nm. Instantaneous linewidth below 300 Hz is realized with telecom DFB lasers. Tunability of the lasers is demonstrated. Commercially available packaged "plug-and-play" devices are manufactured. △ Less

Submitted 25 March, 2014; originally announced March 2014.

Comments: 9 pages, 11 figures

Journal ref: Proc. SPIE 8960, Laser Resonators, Microresonators, and Beam Control XVI, 89600X (March 4, 2014)

Miniature Optical Atomic Clock: Stabilization of a Kerr Comb Oscillator

Authors: A. A. Savchenkov, D. Eliyahu, W. Liang, V. S. Ilchenko, J. Byrd, A. B. Matsko, D. Seidel, L. Maleki

Abstract: Mechanical clocks consist of a pendulum and a clockwork that translates the pendulum period to displayed time. The most advanced clocks utilize optical transitions in atoms in place of the pendulum and an optical frequency comb generated by a femtosecond laser as the clockwork. The comb must be stabilized at two points along its frequency spectrum: one with a laser to lock a comb line to a transit… ▽ More Mechanical clocks consist of a pendulum and a clockwork that translates the pendulum period to displayed time. The most advanced clocks utilize optical transitions in atoms in place of the pendulum and an optical frequency comb generated by a femtosecond laser as the clockwork. The comb must be stabilized at two points along its frequency spectrum: one with a laser to lock a comb line to a transition in the atom, and another through self referencing to stabilize the frequency interval between the comb lines. This approach requires advanced techniques, so optical atomic clocks are currently laboratory devices in specialized labs. In this paper we leverage unique properties of Kerr comb oscillators for realization of optical atomic clocks in miniature form factors. In particular, we describe a clock based on D1 transition of 87Rb that fits in the palm of the hand, and can be further miniaturized to chip scale. △ Less

Submitted 14 January, 2013; originally announced January 2013.

Comments: 4 pages, 4 figures

Optical Kerr Frequency Comb Generation in Overmoded Resonators

Authors: A. B. Matsko, A. A. Savchenkov, W. Liang, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We show that scattering-based interaction among nearly degenerate optical modes is the key factor in low threshold generation of Kerr frequency combs in nonlinear optical resonators possessing small group velocity dispersion (GVD). The mode interaction is capable of producing drastic change in the local GVD, resulting in either a significant reduction or increase of the oscillation threshold. It i… ▽ More We show that scattering-based interaction among nearly degenerate optical modes is the key factor in low threshold generation of Kerr frequency combs in nonlinear optical resonators possessing small group velocity dispersion (GVD). The mode interaction is capable of producing drastic change in the local GVD, resulting in either a significant reduction or increase of the oscillation threshold. It is also responsible for the majority of observed combs in resonators characterized with large normal GVD. We present results of our numerical simulations as well as supporting experimental data. △ Less

Submitted 9 January, 2012; originally announced January 2012.

Transient Regime of Kerr Frequency Comb Formation

Authors: Anatoliy A. Savchenkov, Andrey B. Matsko, Wei Liang, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: Temporal growth of an optical Kerr frequency comb generated in a microresonator is studied both experimentally and numerically. We find that the comb emerges from vacuum fluctuations of the electromagnetic field on timescales significantly exceeding the ringdown time of the resonator modes. The frequency harmonics of the comb spread starting from the optically pumped mode if the microresonator is… ▽ More Temporal growth of an optical Kerr frequency comb generated in a microresonator is studied both experimentally and numerically. We find that the comb emerges from vacuum fluctuations of the electromagnetic field on timescales significantly exceeding the ringdown time of the resonator modes. The frequency harmonics of the comb spread starting from the optically pumped mode if the microresonator is characterized with anomalous group velocity dispersion. The harmonics have different growth rates resulting from sequential four-wave mixing process that explains intrinsic modelocking of the comb. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 4 pages, 5 figures

Hard and Soft Excitation Regimes of Kerr Frequency Combs

Authors: Andrey B. Matsko, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: We theoretically study the stability conditions and excitation regimes of hyper-parametric oscillation and Kerr frequency comb generation in continuously pumped nonlinear optical resonators possessing anomalous group velocity dispersion. We show that both hard and soft excitation regimes are possible in the resonators. Selection between the regimes is achieved via change in the parameters of the p… ▽ More We theoretically study the stability conditions and excitation regimes of hyper-parametric oscillation and Kerr frequency comb generation in continuously pumped nonlinear optical resonators possessing anomalous group velocity dispersion. We show that both hard and soft excitation regimes are possible in the resonators. Selection between the regimes is achieved via change in the parameters of the pum** light. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 4 pages, 7 figures

RF-Photonic Frequency Stability Gear Box

Authors: Andrey B. Matsko, Anatoliy A. Savchenkov, Vladimir S. Ilchenko, David Seidel, Lute Maleki

Abstract: An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF o… ▽ More An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF oscillator locked to two resonator modes having nearly identical sensitivity. For instance, the stability of a 10 MHz master oscillator characterized with Allan deviation of 10^-7 at 10^4s can be increased and transferred to a slave oscillator with identical stability performance, so that the resultant Allan deviation of the slave oscillator becomes equal to 10-13 at 10^4s. The method does not require absolute frequency references to achieve such a performance. △ Less

Submitted 16 November, 2011; originally announced November 2011.

Comments: 3 pages, 1 figure, to appear in Optics Letters

Surface Acoustic Wave Frequency Comb

Authors: A. A. Savchenkov, A. B. Matsko, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We report on realization of an efficient triply-resonant coupling between two long lived optical modes and a high frequency surface acoustic wave (SAW) mode of the same monolithic crystalline whispering gallery mode resonator. The coupling results in an opto-mechanical oscillation and generation of a monochromatic SAW. A strong nonlinear interaction of this mechanical mode with other equidistant S… ▽ More We report on realization of an efficient triply-resonant coupling between two long lived optical modes and a high frequency surface acoustic wave (SAW) mode of the same monolithic crystalline whispering gallery mode resonator. The coupling results in an opto-mechanical oscillation and generation of a monochromatic SAW. A strong nonlinear interaction of this mechanical mode with other equidistant SAW modes leads to mechanical hyper-parametric oscillation and generation of a SAW pulse train and associated frequency comb in the resonator. We visualized the comb observing the modulation of the modulated light esca** the resonator. △ Less

Submitted 7 June, 2011; originally announced June 2011.

Universal Optical Frequency Comb

Authors: A. A. Savchenkov, A. B. Matsko, W. Liang, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We demonstrate that whispering gallery mode resonators can be utilized to generate optical frequency combs based on four wave mixing process at virtually any frequency that lies in the transparency window of the resonator host material. We show theoretically how the morphology of the resonator can be engineered to produce a family of spectrally equidistant modes with anomalous group velocity dispe… ▽ More We demonstrate that whispering gallery mode resonators can be utilized to generate optical frequency combs based on four wave mixing process at virtually any frequency that lies in the transparency window of the resonator host material. We show theoretically how the morphology of the resonator can be engineered to produce a family of spectrally equidistant modes with anomalous group velocity dispersion appropriate for the comb generation. We present experimental results for a frequency comb centered at 794 nm to support our theoretical findings. △ Less

Submitted 16 September, 2010; originally announced September 2010.

Comments: 4 pages, 2 figures

Whispering gallery mode resonator based ultra-narrow linewidth external cavity semiconductor laser

Authors: W. Liang, V. S. Ilchenko, A. A. Savchenkov, A. B. Matsko, D. Seidel, L. Maleki

Abstract: We demonstrate a miniature self-injection locked DFB laser using resonant optical feedback from a high-Q crystalline whispering gallery mode resonator. The linewidth reduction factor is greater than 10,000, with resultant instantaneous linewidth less than 200 Hz. The minimal value of the Allan deviation for the laser frequency stability is 3x10^(-12) at the integration time of 20 us. The laser pos… ▽ More We demonstrate a miniature self-injection locked DFB laser using resonant optical feedback from a high-Q crystalline whispering gallery mode resonator. The linewidth reduction factor is greater than 10,000, with resultant instantaneous linewidth less than 200 Hz. The minimal value of the Allan deviation for the laser frequency stability is 3x10^(-12) at the integration time of 20 us. The laser possesses excellent spectral purity and good long term stability. △ Less

Submitted 4 August, 2010; originally announced August 2010.

Comments: To be published in Optics Letters

Self-referenced opto-mechanical oscillator

Authors: A. B. Matsko, A. A. Savchenkov, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: We propose a method for frequency stabilization of a resonant opto-mechanical oscillator utilizing the different temperature and strain dependence of the optical and mechanical modes. In particular, we show that the temperature of the mechanical resonator can be stabilized to microKelvin level without the need for an external temperature or frequency reference. The method is promising for reaching… ▽ More We propose a method for frequency stabilization of a resonant opto-mechanical oscillator utilizing the different temperature and strain dependence of the optical and mechanical modes. In particular, we show that the temperature of the mechanical resonator can be stabilized to microKelvin level without the need for an external temperature or frequency reference. The method is promising for reaching the thermodynamically limited performance of opto-mechanical oscillators, and even for lifting the thermodynamic limit. △ Less

Submitted 25 June, 2010; originally announced June 2010.

Passively mode locked Raman laser

Authors: W. Liang, V. S. Ilchenko, A. A. Savchenkov, A. B. Matsko, D. Seidel, L. Maleki

Abstract: We report on the observation of a novel mode locked optical comb generated at the Raman offset (Raman comb) in an optically pumped crystalline whispering gallery mode resonator. Mode locking is confirmed via measurement of the radio-frequency beat note produced by the optical comb on a fast photodiode. Neither the conventional Kerr comb nor hyper-parametric oscillation is observed when the Raman c… ▽ More We report on the observation of a novel mode locked optical comb generated at the Raman offset (Raman comb) in an optically pumped crystalline whispering gallery mode resonator. Mode locking is confirmed via measurement of the radio-frequency beat note produced by the optical comb on a fast photodiode. Neither the conventional Kerr comb nor hyper-parametric oscillation is observed when the Raman comb is present. △ Less

Submitted 25 June, 2010; originally announced June 2010.

Opto-mechanics with surface acoustic wave whispering gallery modes

Authors: A. B. Matsko, A. A. Savchenkov, V. S. Ilchenko, D. Seidel, L. Maleki

Abstract: A surface acoustic wave (SAW) creates its own high-Q ultra-small volume whispering gallery modes (WGMs), different from usual bulk acoustic WGMs, in an optical dielectric WGM resonator. We show that it is possible to realize an externally controllable, efficient triply-resonant opto-mechanical interaction between two optical WGMs and the SAW WGM and to use such an interaction in various sensor a… ▽ More A surface acoustic wave (SAW) creates its own high-Q ultra-small volume whispering gallery modes (WGMs), different from usual bulk acoustic WGMs, in an optical dielectric WGM resonator. We show that it is possible to realize an externally controllable, efficient triply-resonant opto-mechanical interaction between two optical WGMs and the SAW WGM and to use such an interaction in various sensor applications. △ Less

Submitted 3 August, 2009; originally announced August 2009.

Coherent resonant Ka-band photonic microwave receiver

Authors: Vladimir S. Ilchenko, Jerry Byrd, Anatoliy A. Savchenkov, David Seidel, Andrey B. Matsko, Lute Maleki

Abstract: We propose theoretically and demonstrate experimentally a coherent microwave photonic receiver operating at 35 GHz carrier frequency. The device is based on a lithium niobate or lithium tantalate optical whispering gallery mode resonator coupled to a microwave strip line resonator. Microwave local oscillator is fed into the microwave resonator along with the microwave signal. We show that the se… ▽ More We propose theoretically and demonstrate experimentally a coherent microwave photonic receiver operating at 35 GHz carrier frequency. The device is based on a lithium niobate or lithium tantalate optical whispering gallery mode resonator coupled to a microwave strip line resonator. Microwave local oscillator is fed into the microwave resonator along with the microwave signal. We show that the sensitivity of this receiver significantly exceeds the sensitivity of the incoherent quadratic receiver based on the same technology. The coherent receiver can possess a dynamic range in excess of 100 dB in 5 MHz band if a low noise laser is utilized. △ Less

Submitted 19 June, 2008; originally announced June 2008.

Optical combs with a crystalline whispering gallery mode resonator

Authors: Anatoliy A. Savchenkov, Andrey B. Matsko, Vladimir S. Ilchenko, Iouri Solomatine, David Seidel, Lute Maleki

Abstract: We report on the experimental demonstration of a tunable monolithic optical frequency comb generator. The device is based on the four-wave mixing in a crystalline calcium fluoride whispering gallery mode resonator. The frequency spacing of the comb is given by an integer number of the free spectral range of the resonator. We select the desired number by tuning the pum** laser frequency with re… ▽ More We report on the experimental demonstration of a tunable monolithic optical frequency comb generator. The device is based on the four-wave mixing in a crystalline calcium fluoride whispering gallery mode resonator. The frequency spacing of the comb is given by an integer number of the free spectral range of the resonator. We select the desired number by tuning the pum** laser frequency with respect to the corresponding resonator mode. We also observe interacting optical combs and high-frequency hyperparametric oscillation, depending on the experimental conditions. A potential application of the comb for generating narrowband frequency microwave signals is demonstrated. △ Less

Submitted 1 April, 2008; originally announced April 2008.

Tunable whispering gallery modes for spectroscopy and CQED experiments

Authors: Wolf von Klitzing, Romain Long, Vladimir S. Ilchenko, Jean Hare, Valerie Lefevre-Seguin

Abstract: We have tuned the whispering gallery modes of a fused silica micro- resonator over nearly 1 nm at 800 nm, i.e.over half of a free spectral range or the equivalent of 10^6 linewidths of the resonator.This has been achieved by a new method based on the stretching of a two-stem microsphere.The devices described below will permit new Cavity-QED experiments with this ultra high .nesse optical resonat… ▽ More We have tuned the whispering gallery modes of a fused silica micro- resonator over nearly 1 nm at 800 nm, i.e.over half of a free spectral range or the equivalent of 10^6 linewidths of the resonator.This has been achieved by a new method based on the stretching of a two-stem microsphere.The devices described below will permit new Cavity-QED experiments with this ultra high .nesse optical resonator when it is desirable to optimise its coupling to emitters with given transition frequencies. The tuning capability demonstrated is compatible with both UHV and low temperature operation which should be useful for future experiments with laser cooled atoms or single quantum dots.A general overview of the current state of the art in microspheres is given as well as a more general introduction. △ Less

Submitted 24 November, 2000; originally announced November 2000.

Comments: ReVTeX, 16 pages, 9 color figures

Journal ref: New Journal of Physics : 141-1414 (2001)

Microtorus: a High Finesse Microcavity with Whispering-Gallery Modes

Authors: Vladimir S. Ilchenko, Michael L. Gorodetsky, X. Steve Yao, Lute Maleki

Abstract: We have demonstrated a 165 micron oblate spheroidal microcavity with free spectral range 383.7 GHz (3.06nm), resonance bandwidth 25 MHz (Q ~ 10^7) at 1550nm, and finesse F > 10^4. The highly oblate spheroidal dielectric microcavity combines very high Q-factor, typical of microspheres, with vastly reduced number of excited whispering-gallery (WG) modes (by two orders of magnitude). The very large… ▽ More We have demonstrated a 165 micron oblate spheroidal microcavity with free spectral range 383.7 GHz (3.06nm), resonance bandwidth 25 MHz (Q ~ 10^7) at 1550nm, and finesse F > 10^4. The highly oblate spheroidal dielectric microcavity combines very high Q-factor, typical of microspheres, with vastly reduced number of excited whispering-gallery (WG) modes (by two orders of magnitude). The very large free spectral range in the novel microcavity - few hundred instead of few GigaHertz in typical microspheres - is desirable for applications in spectral analysis, narrow-linewidth optical and RF oscillators, and cavity QED. △ Less

Submitted 28 September, 2000; originally announced September 2000.

Comments: 11 pages, 3 figures

Frequency tuning of the whispering gallery modes of silica microspheres for CQED and spectroscopy

Authors: Wolf von Klitzing, Romain Long, Vladimir S. Ilchenko, Jean Hare, Valerie Lefevre-Seguin

Abstract: We have tuned the whispering gallery modes of a fused silica microresonator over nearly 1 nm at 800 nm, i.e. over 0.5 FSR or 10^6 linewidths of the resonator. This has been achieved by a new method based on the stretching of a two-stem microsphere. The devices described below will permit new Cavity-QED experiments with this high-Q optical resonator when it is desirable to optimize its coupling t… ▽ More We have tuned the whispering gallery modes of a fused silica microresonator over nearly 1 nm at 800 nm, i.e. over 0.5 FSR or 10^6 linewidths of the resonator. This has been achieved by a new method based on the stretching of a two-stem microsphere. The devices described below will permit new Cavity-QED experiments with this high-Q optical resonator when it is desirable to optimize its coupling to emitters with given transition frequencies. The tuning capability demonstrated here is compatible with both UHV and low temperature operation, which should be useful for future experiments with laser cooled atoms or single quantum dots. △ Less

Submitted 2 August, 2000; originally announced August 2000.

Comments: ReVTeX, 4 pages, 3 figures

Surface and internal scattering in microspheres: limits imposed on the Q-factor and mode splitting

Authors: M. L. Gorodetsky, V. S. Ilchenko, A. D. Pryamikov

Abstract: Accurate calculation of internal and surface scattering losses in fused silica microspheres is done. We show that in microspheres internal scattering is partly inhibited as compared to losses in the bulk material. We pay attention on the effect of frozen thermodynamical capillary waves on surface roughness. We calculate also the value of mode splitting due to backscattering and other effects of… ▽ More Accurate calculation of internal and surface scattering losses in fused silica microspheres is done. We show that in microspheres internal scattering is partly inhibited as compared to losses in the bulk material. We pay attention on the effect of frozen thermodynamical capillary waves on surface roughness. We calculate also the value of mode splitting due to backscattering and other effects of this backscattering. △ Less

Submitted 2 March, 1999; originally announced March 1999.

Comments: 11 pages, 4 figures, Photonics West-99, San Jose, January, 28

Report number: 3611-08

Optical microsphere resonators: optimal coupling to high-Q whispering gallery modes

Authors: Michael L. Gorodetsky, Vladimir S. Ilchenko

Abstract: A general model is presented for coupling of high-$Q$ whispering-gallery modes in optical microsphere resonators with coupler devices possessing discrete and continuous spectrum of propagating modes. By contrast to conventional high-Q optical cavities, in microspheres independence of high intrinsic quality-factor and controllable parameters of coupling via evanescent field offer variety of regim… ▽ More A general model is presented for coupling of high-$Q$ whispering-gallery modes in optical microsphere resonators with coupler devices possessing discrete and continuous spectrum of propagating modes. By contrast to conventional high-Q optical cavities, in microspheres independence of high intrinsic quality-factor and controllable parameters of coupling via evanescent field offer variety of regimes earlier available in RF devices. The theory is applied to the earlier-reported data on different types of couplers to microsphere resonators and complemented by experimental demonstration of enhanced coupling efficiency (about 80%) and variable loading regimes with Q>10^8 fused silica microspheres. △ Less

Submitted 23 May, 1998; originally announced May 1998.

Comments: 14 pages, 4 figures