-
Effect of Burn Parameters on PAH Emissions at Conditions Relevant for Prescribed Fires
Authors:
Karl Töpperwien,
Guillaume Vignat,
Alexandra J. Feinberg,
Conner Daube,
Mitchell W. Alton,
Edward C. Fortner,
Manjula R. Canagaratna,
Matthias F. Kling,
Mary Johnson,
Kari Nadeau,
Scott Herndon,
John T. Jayne,
Matthias Ihme
Abstract:
Wildfire smoke is a health hazard as it contains a mixture of carcinogenic volatile compounds and fine particulate matter. In particular, exposure to polycyclic aromatic hydrocarbons (PAHs) is a major concern, since these compounds have been recognized as important contributors to the overall carcinogenic risk of smoke exposure. In this work, gas and particle-phase PAH emissions from the combustio…
▽ More
Wildfire smoke is a health hazard as it contains a mixture of carcinogenic volatile compounds and fine particulate matter. In particular, exposure to polycyclic aromatic hydrocarbons (PAHs) is a major concern, since these compounds have been recognized as important contributors to the overall carcinogenic risk of smoke exposure. In this work, gas and particle-phase PAH emissions from the combustion of Eastern White Pine (pinus strobus) were quantified using time-of-flight mass spectrometry over a range of burn conditions representative of wildfires and prescribed fires. These experiments allow for controlling conditions of fuel moisture, heat flux, and oxygen concentration to understand their impact on PAH emissions. We find that optimal conditions for fuel moisture content of 20 - 30%, heat load onto the sample of 60 - 70 kW/m$^2$, and oxygen concentrations of the burn environment of 5 - 15% can reduce the emissions of the heavy molar weight PAHs by up to 77%. Our analysis shows that the relative carcinogenic risk can be reduced by more than 50% under optimal conditions, offering a way for reducing emission exposure from forest treatment activities.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
FireBench: A High-fidelity Ensemble Simulation Framework for Exploring Wildfire Behavior and Data-driven Modeling
Authors:
Qing Wang,
Matthias Ihme,
Cenk Gazen,
Yi-Fan Chen,
John Anderson
Abstract:
Background. Wildfire research uses ensemble methods to analyze fire behaviors and assess uncertainties. Nonetheless, current research methods are either confined to simple models or complex simulations with limits. Modern computing tools could allow for efficient, high-fidelity ensemble simulations. Aims. This study proposes a high-fidelity ensemble wildfire simulation framework for studying wildf…
▽ More
Background. Wildfire research uses ensemble methods to analyze fire behaviors and assess uncertainties. Nonetheless, current research methods are either confined to simple models or complex simulations with limits. Modern computing tools could allow for efficient, high-fidelity ensemble simulations. Aims. This study proposes a high-fidelity ensemble wildfire simulation framework for studying wildfire behavior, ML tasks, fire-risk assessment, and uncertainty analysis. Methods. In this research, we present a simulation framework that integrates the Swirl-Fire large-eddy simulation tool for wildfire predictions with the Vizier optimization platform for automated run-time management of ensemble simulations and large-scale batch processing. All simulations are executed on tensor-processing units to enhance computational efficiency. Key results. A dataset of 117 simulations is created, each with 1.35 billion mesh points. The simulations are compared to existing experimental data and show good agreement in terms of fire rate of spread. Computations are done for fire acceleration, mean rate of spread, and fireline intensity. Conclusions. Strong coupling between these 2 parameters are observed for the fire spread and intermittency. A critical Froude number that delineates fires from plume-driven to convection-driven is identified and confirmed with literature observations. Implications. The ensemble simulation framework is efficient in facilitating parametric wildfire studies.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Generalisation of the Spectral Difference scheme for the diffused-interface five equation model
Authors:
Niccolò Tonicello,
Guido Lodato,
Matthias Ihme
Abstract:
The present work focuses on the generalisation of the Spectral Difference (SD) scheme to the reduced Baer-Nunziato system known as five-equation model for the simulation of two immiscible compressible fluids. This five equation model is considered with the additional Allen-Cahn regularisation to avoid both over-diffusion and over-thinning of the phase field representing the interface. Finally, in…
▽ More
The present work focuses on the generalisation of the Spectral Difference (SD) scheme to the reduced Baer-Nunziato system known as five-equation model for the simulation of two immiscible compressible fluids. This five equation model is considered with the additional Allen-Cahn regularisation to avoid both over-diffusion and over-thinning of the phase field representing the interface. Finally, in order to preserve contact discontinuities, in the reconstruction step of the spectral difference scheme, a change of variables from conservative to primitive is used. This approach is shown to be beneficial in avoiding pressure oscillations at material interfaces. An extensive series of numerical tests are proposed to assess accuracy and robustness of the present method. Both kinematic (Rider-Kothe vortex) and two-phase flow problems (Rayleigh-Taylor instability, shock-droplet interaction, Taylor-Green vortex) are considered.
△ Less
Submitted 29 March, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
A Spectral Element Enrichment Wall-Model
Authors:
Steven R. Brill,
Pinaki Pal,
Muhsin Ameen,
Chao Xu,
Matthias Ihme
Abstract:
We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in…
▽ More
We develop an enrichment wall-model within the spectral element method (SEM) framework for large-eddy simulations of wall-bounded flows. The method augments the polynomial solution in the wall-adjacent elements with an analytical law-of-the-wall enrichment function representing the mean velocity near the wall. In the solution representation, this enrichment function captures the large gradients in the boundary layer, which allows the polynomial modes to represent the turbulent fluctuations. The enriched solution is able to resolve the shear stress at the wall without any modification to the no-slip wall boundary conditions. The performance of the SEM enrichment wall-modeling approach is assessed in turbulent channel flow LES for a range of Reynolds numbers. The results show that the proposed method improves solution accuracy on under-resolved near-wall grids as compared to the traditional shear stress wall-models.
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
Turbulence in Focus: Benchmarking Scaling Behavior of 3D Volumetric Super-Resolution with BLASTNet 2.0 Data
Authors:
Wai Tong Chung,
Bassem Akoush,
Pushan Sharma,
Alex Tamkin,
Ki Sung Jung,
Jacqueline H. Chen,
Jack Guo,
Davy Brouzet,
Mohsen Talei,
Bruno Savard,
Alexei Y. Poludnenko,
Matthias Ihme
Abstract:
Analysis of compressible turbulent flows is essential for applications related to propulsion, energy generation, and the environment. Here, we present BLASTNet 2.0, a 2.2 TB network-of-datasets containing 744 full-domain samples from 34 high-fidelity direct numerical simulations, which addresses the current limited availability of 3D high-fidelity reacting and non-reacting compressible turbulent f…
▽ More
Analysis of compressible turbulent flows is essential for applications related to propulsion, energy generation, and the environment. Here, we present BLASTNet 2.0, a 2.2 TB network-of-datasets containing 744 full-domain samples from 34 high-fidelity direct numerical simulations, which addresses the current limited availability of 3D high-fidelity reacting and non-reacting compressible turbulent flow simulation data. With this data, we benchmark a total of 49 variations of five deep learning approaches for 3D super-resolution - which can be applied for improving scientific imaging, simulations, turbulence models, as well as in computer vision applications. We perform neural scaling analysis on these models to examine the performance of different machine learning (ML) approaches, including two scientific ML techniques. We demonstrate that (i) predictive performance can scale with model size and cost, (ii) architecture matters significantly, especially for smaller models, and (iii) the benefits of physics-based losses can persist with increasing model size. The outcomes of this benchmark study are anticipated to offer insights that can aid the design of 3D super-resolution models, especially for turbulence models, while this data is expected to foster ML methods for a broad range of flow physics applications. This data is publicly available with download links and browsing tools consolidated at https://blastnet.github.io.
△ Less
Submitted 27 October, 2023; v1 submitted 23 September, 2023;
originally announced September 2023.
-
A high-order diffused-interface approach for two-phase compressible flow simulations using a Discontinuous Galerkin framework
Authors:
Niccolò Tonicello,
Matthias Ihme
Abstract:
A diffused-interface approach based on the Allen-Cahn phase field equation is developed within a high-order Discontinuous Galerkin framework. The interface capturing technique is based on the balance between explicit diffusion and sharpening terms in the phase field equation, where the former term involves the computation of the local interface normal vectors. Due to the well-known Gibbs phenomeno…
▽ More
A diffused-interface approach based on the Allen-Cahn phase field equation is developed within a high-order Discontinuous Galerkin framework. The interface capturing technique is based on the balance between explicit diffusion and sharpening terms in the phase field equation, where the former term involves the computation of the local interface normal vectors. Due to the well-known Gibbs phenomenon encountered in high-order discretisations of steep profiles such as shocks and/or interfaces, the accurate evaluation of the normal vector requires special consideration. To this end, a non-linear preconditioning strategy is proposed in this work where an additional smooth level-set function advected by the velocity field is used for the evaluation of the normal vectors. It is shown that for appropriate choices of numerical fluxes and parameters of the model, the phase field remains bounded without any need for explicit regularisation. The proposed diffused-interface technique is implemented within a five equation model for fully compressible two-phase flows. In order to preserve isolated interfaces, a quasi-conservative discretisation of the five equation model is employed. A series of numerical experiments of increasing complexity are performed in order to assess the accuracy and robustness of the developed methodology, including two-phase flows involving viscous effects, gravitational forces, and surface tension.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Accelerating large-eddy simulations of clouds with Tensor Processing Units
Authors:
Sheide Chammas,
Qing Wang,
Tapio Schneider,
Matthias Ihme,
Yi-fan Chen,
John Anderson
Abstract:
Clouds, especially low clouds, are crucial for regulating Earth's energy balance and mediating the response of the climate system to changes in greenhouse gas concentrations. Despite their importance for climate, they remain relatively poorly understood and are inaccurately represented in climate models. A principal reason is that the high computational expense of simulating them with large-eddy s…
▽ More
Clouds, especially low clouds, are crucial for regulating Earth's energy balance and mediating the response of the climate system to changes in greenhouse gas concentrations. Despite their importance for climate, they remain relatively poorly understood and are inaccurately represented in climate models. A principal reason is that the high computational expense of simulating them with large-eddy simulations (LES) has inhibited broad and systematic numerical experimentation and the generation of large datasets for training parametrization schemes for climate models. Here we demonstrate LES of low clouds on Tensor Processing Units (TPUs), application-specific integrated circuits that were originally developed for machine learning applications. We show that TPUs in conjunction with tailored software implementations can be used to simulate computationally challenging stratocumulus clouds in conditions observed during the Dynamics and Chemistry of Marine Stratocumulus (DYCOMS) field study. The TPU-based LES code successfully reproduces clouds during DYCOMS and opens up the large computational resources available on TPUs to cloud simulations. The code enables unprecedented weak and strong scaling of LES, making it possible, for example, to simulate stratocumulus with $10\times$ speedup over real-time evolution in domains with a $34.7~\mathrm{km} \times 53.8~\mathrm{km}$ horizontal cross section. The results open up new avenues for computational experiments and for substantially enlarging the sample of LES available to train parameterizations of low clouds.
△ Less
Submitted 17 August, 2023; v1 submitted 11 January, 2023;
originally announced January 2023.
-
Reaction Nanoscopy of Ion Emission from Sub-wavelength Propanediol Droplets
Authors:
Philipp Rosenberger,
Ritika Dagar,
Wenbin Zhang,
Arijit Majumdar,
Marcel Neuhaus,
Matthias Ihme,
Boris Bergues,
Matthias F. Kling
Abstract:
Droplets provide unique opportunities for the investigation of laser-induced surface chemistry. Chemical reactions on the surface of charged droplets are ubiquitous in nature and can provide critical insight into more efficient processes for industrial chemical production. Here, we demonstrate the application of the reaction nanoscopy technique to strong-field ionized nanodroplets of propanediol (…
▽ More
Droplets provide unique opportunities for the investigation of laser-induced surface chemistry. Chemical reactions on the surface of charged droplets are ubiquitous in nature and can provide critical insight into more efficient processes for industrial chemical production. Here, we demonstrate the application of the reaction nanoscopy technique to strong-field ionized nanodroplets of propanediol (PDO). The technique's sensitivity to the near-field around the droplet allows for the in-situ characterization of the average droplet size and charge. The use of ultrashort laser pulses enables control of the amount of surface charge by the laser intensity. Moreover, we demonstrate the surface chemical sensitivity of reaction nanoscopy by comparing droplets of the isomers 1,2-PDO and 1,3-PDO in their ion emission and fragmentation channels. Referencing the ion yields to gas-phase data, we find an enhanced production of methyl cations from droplets of the 1,2-PDO isomer. Density functional theory simulations support that this enhancement is due to the alignment of 1,2-PDO molecules on the surface. The results pave the way towards spatio-temporal observations of charge dynamics and surface reactions on droplets in pump-probe studies.
△ Less
Submitted 11 December, 2022;
originally announced December 2022.
-
A High-resolution Large-eddy Simulation Framework for Wildland Fire Predictions using TensorFlow
Authors:
Qing Wang,
Matthias Ihme,
Rod R. Linn,
Yi-Fan Chen,
Vivian Yang,
Fei Sha,
Craig Clements,
Jenna S. McDanold,
John Anderson
Abstract:
As the impact of wildfires has become increasingly more severe over the last decades, there is continued pressure for improvements in our ability to predict wildland fire behavior over a wide range of conditions. One approach towards this goal is through coupled fire/atmosphere modeling tools. While significant progress has been made on advancing their physical fidelity, existing modeling tools ha…
▽ More
As the impact of wildfires has become increasingly more severe over the last decades, there is continued pressure for improvements in our ability to predict wildland fire behavior over a wide range of conditions. One approach towards this goal is through coupled fire/atmosphere modeling tools. While significant progress has been made on advancing their physical fidelity, existing modeling tools have not taken full advantage of emerging programming paradigms and computing architectures to enable high-resolution wildfire simulations. By addressing this gap, this work presents a new wildfire simulation framework that enables landscape-scale wildfire simulations with physical representation of the combustion at affordable computational cost. This is achieved by develo** a coupled fire/atmosphere model in the TensorFlow programming paradigm, which enables highly efficient and scalable computations on Tensor Processing Unit (TPU) hardware architecture. To validate this simulation framework and demonstrate its efficiency, simulations of the prescribed fire experiment FireFlux II (Clements et al., 2019) are performed. By considering a parametric study on the mesh resolution, we show that the global quantities such as volumetric heat release and fire-spread rate are insensitive to the horizontal mesh resolution within a range between 0.5 m and 2 m, which is sufficient for predicting fire intermittency and dynamic fire properties associated with fine-scale turbulent structures in the atmospheric boundary layer.
△ Less
Submitted 12 July, 2023; v1 submitted 9 December, 2022;
originally announced December 2022.
-
Recurrent Convolutional Deep Neural Networks for Modeling Time-Resolved Wildfire Spread Behavior
Authors:
John Burge,
Matthew R. Bonanni,
R. Lily Hu,
Matthias Ihme
Abstract:
The increasing incidence and severity of wildfires underscores the necessity of accurately predicting their behavior. While high-fidelity models derived from first principles offer physical accuracy, they are too computationally expensive for use in real-time fire response. Low-fidelity models sacrifice some physical accuracy and generalizability via the integration of empirical measurements, but…
▽ More
The increasing incidence and severity of wildfires underscores the necessity of accurately predicting their behavior. While high-fidelity models derived from first principles offer physical accuracy, they are too computationally expensive for use in real-time fire response. Low-fidelity models sacrifice some physical accuracy and generalizability via the integration of empirical measurements, but enable real-time simulations for operational use in fire response. Machine learning techniques offer the ability to bridge these objectives by learning first-principles physics while achieving computational speedup. While deep learning approaches have demonstrated the ability to predict wildfire propagation over large time periods, time-resolved fire-spread predictions are needed for active fire management. In this work, we evaluate the ability of deep learning approaches in accurately modeling the time-resolved dynamics of wildfires. We use an autoregressive process in which a convolutional recurrent deep learning model makes predictions that propagate a wildfire over 15 minute increments. We demonstrate the model in application to three simulated datasets of increasing complexity, containing both field fires with homogeneous fuel distribution as well as real-world topologies sampled from the California region of the United States. We show that even after 100 autoregressive predictions representing more than 24 hours of simulated fire spread, the resulting models generate stable and realistic propagation dynamics, achieving a Jaccard score between 0.89 and 0.94 when predicting the resulting fire scar.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
The Bearable Lightness of Big Data: Towards Massive Public Datasets in Scientific Machine Learning
Authors:
Wai Tong Chung,
Ki Sung Jung,
Jacqueline H. Chen,
Matthias Ihme
Abstract:
In general, large datasets enable deep learning models to perform with good accuracy and generalizability. However, massive high-fidelity simulation datasets (from molecular chemistry, astrophysics, computational fluid dynamics (CFD), etc. can be challenging to curate due to dimensionality and storage constraints. Lossy compression algorithms can help mitigate limitations from storage, as long as…
▽ More
In general, large datasets enable deep learning models to perform with good accuracy and generalizability. However, massive high-fidelity simulation datasets (from molecular chemistry, astrophysics, computational fluid dynamics (CFD), etc. can be challenging to curate due to dimensionality and storage constraints. Lossy compression algorithms can help mitigate limitations from storage, as long as the overall data fidelity is preserved. To illustrate this point, we demonstrate that deep learning models, trained and tested on data from a petascale CFD simulation, are robust to errors introduced during lossy compression in a semantic segmentation problem. Our results demonstrate that lossy compression algorithms offer a realistic pathway for exposing high-fidelity scientific data to open-source data repositories for building community datasets. In this paper, we outline, construct, and evaluate the requirements for establishing a big data framework, demonstrated at https://blastnet.github.io/, for scientific machine learning.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Next Day Wildfire Spread: A Machine Learning Data Set to Predict Wildfire Spreading from Remote-Sensing Data
Authors:
Fantine Huot,
R. Lily Hu,
Nita Goyal,
Tharun Sankar,
Matthias Ihme,
Yi-Fan Chen
Abstract:
Predicting wildfire spread is critical for land management and disaster preparedness. To this end, we present `Next Day Wildfire Spread,' a curated, large-scale, multivariate data set of historical wildfires aggregating nearly a decade of remote-sensing data across the United States. In contrast to existing fire data sets based on Earth observation satellites, our data set combines 2D fire data wi…
▽ More
Predicting wildfire spread is critical for land management and disaster preparedness. To this end, we present `Next Day Wildfire Spread,' a curated, large-scale, multivariate data set of historical wildfires aggregating nearly a decade of remote-sensing data across the United States. In contrast to existing fire data sets based on Earth observation satellites, our data set combines 2D fire data with multiple explanatory variables (e.g., topography, vegetation, weather, drought index, population density) aligned over 2D regions, providing a feature-rich data set for machine learning. To demonstrate the usefulness of this data set, we implement a neural network that takes advantage of the spatial information of this data to predict wildfire spread. We compare the performance of the neural network with other machine learning models: logistic regression and random forest. This data set can be used as a benchmark for develo** wildfire propagation models based on remote sensing data for a lead time of one day.
△ Less
Submitted 2 March, 2022; v1 submitted 4 December, 2021;
originally announced December 2021.
-
A TensorFlow Simulation Framework for Scientific Computing of Fluid Flows on Tensor Processing Units
Authors:
Qing Wang,
Matthias Ihme,
Yi-Fan Chen,
John Anderson
Abstract:
A computational fluid dynamics (CFD) simulation framework for fluid-flow prediction is developed on the Tensor Processing Unit (TPU) platform. The TPU architecture is featured with accelerated dense matrix multiplication, large high bandwidth memory, and a fast inter-chip interconnect, making it attractive for high-performance scientific computing. The CFD framework solves the variable-density Nav…
▽ More
A computational fluid dynamics (CFD) simulation framework for fluid-flow prediction is developed on the Tensor Processing Unit (TPU) platform. The TPU architecture is featured with accelerated dense matrix multiplication, large high bandwidth memory, and a fast inter-chip interconnect, making it attractive for high-performance scientific computing. The CFD framework solves the variable-density Navier-Stokes equation using a low-Mach approximation, and the governing equations are discretized by a finite-difference method on a collocated structured mesh. It uses the graph-based TensorFlow as the programming paradigm. The accuracy and performance of this framework is studied both numerically and analytically, specifically focusing on effects of TPU-native single precision floating point arithmetic. The algorithm and implementation are validated with canonical 2D and 3D Taylor-Green vortex simulations. To demonstrate the capability for simulating turbulent flows, simulations are conducted for two configurations, namely decaying homogeneous isotropic turbulence and a turbulent planar jet. Both simulations show good statistical agreement with reference solutions. The performance analysis shows a linear weak scaling and a superlinear strong scaling up to a full TPU v3 pod with 2048 cores.
△ Less
Submitted 18 January, 2022; v1 submitted 25 August, 2021;
originally announced August 2021.
-
Interpretable Data-driven Methods for Subgrid-scale Closure in LES for Transcritical LOX/GCH4 Combustion
Authors:
Wai Tong Chung,
Aashwin Ananda Mishra,
Matthias Ihme
Abstract:
Many practical combustion systems such as those in rockets, gas turbines, and internal combustion engines operate under high pressures that surpass the thermodynamic critical limit of fuel-oxidizer mixtures. These conditions require the consideration of complex fluid behaviors that pose challenges for numerical simulations, casting doubts on the validity of existing subgrid-scale (SGS) models in l…
▽ More
Many practical combustion systems such as those in rockets, gas turbines, and internal combustion engines operate under high pressures that surpass the thermodynamic critical limit of fuel-oxidizer mixtures. These conditions require the consideration of complex fluid behaviors that pose challenges for numerical simulations, casting doubts on the validity of existing subgrid-scale (SGS) models in large-eddy simulations of these systems. While data-driven methods have shown high accuracy as closure models in simulations of turbulent flames, these models are often criticized for lack of physical interpretability, wherein they provide answers but no insight into their underlying rationale. The objective of this study is to assess SGS stress models from conventional physics-driven approaches and an interpretable machine learning algorithm, i.e., the random forest regressor, in a turbulent transcritical non-premixed flame. To this end, direct numerical simulations (DNS) of transcritical liquid-oxygen/gaseous-methane (LOX/GCH4) inert and reacting flows are performed. Using this data, a priori analysis is performed on the Favre-filtered DNS data to examine the accuracy of physics-based and random forest SGS-models under these conditions. SGS stresses calculated with the gradient model show good agreement with the exact terms extracted from filtered DNS. The accuracy of the random-forest regressor decreased when physics-based constraints are applied to the feature set. Results demonstrate that random forests can perform as effectively as algebraic models when modeling subgrid stresses, only when trained on a sufficiently representative database. The employment of random forest feature importance score is shown to provide insight into discovering subgrid-scale stresses through sparse regression.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Heat transfer augmentation by recombination reactions in turbulent reacting boundary layers at elevated pressures
Authors:
Nikolaos Perakis,
Oskar Haidn,
Matthias Ihme
Abstract:
A study of a reacting boundary layer flow with heat transfer at conditions typical for configurations at elevated pressures has been performed using a set of direct numerical simulations. Effects of wall temperatures are investigated, representative for cooled walls of gas turbines and sub-scale rocket engines operating with hydrocarbon as fuels. The results show that exothermic chemical reactions…
▽ More
A study of a reacting boundary layer flow with heat transfer at conditions typical for configurations at elevated pressures has been performed using a set of direct numerical simulations. Effects of wall temperatures are investigated, representative for cooled walls of gas turbines and sub-scale rocket engines operating with hydrocarbon as fuels. The results show that exothermic chemical reactions induced by the low-enthalpy in the boundary layer take place predominantly in the logarthimic sub-layer. The majority of the heat release is attributed to the exothermic recombination of OH and CO to produce CO2 and H2O. The recombination reactions result in an increase of the wall heat loads by up to 20% compared to the inert flow. The gas composition experiences strong deviations from the chemical equilibrium conditions. In fact, a quenching of the major species is observed within the viscous sub-layer and the transition region. Analysis of chemical time-scales shows that the location of quenched composition coincides with the region where the Damkoehler number decreases below unity. Within the viscous sub-layer, a secondary reaction zone is detected, involving the production of formyl and formaldehyde radicals that provide an additional source of energy release. The analysis of the reaction paths showed that reactions with zero activation energy are responsible for this change in gas composition, which also account for the initial branching of hydrocarbon fuels decomposition according to previous auto-ignition studies. The effect of the secondary recombination reactions is more prominent for the lower wall temperature case. Finally, the role of turbulent fluctuations on the species net chemical production rates is evaluated, showing a strong correlation between species and temperature fluctuations.
△ Less
Submitted 12 February, 2021;
originally announced February 2021.
-
Requirements Towards Predictive Simulations of Turbulent Reacting Flows
Authors:
Matthias Ihme
Abstract:
Significant progress has been made on the model development for simulating turbulent reacting flows. As a consequence, we are currently in a position where key-physical aspects of fairly complex combustion processes are well understood at a qualitative and -- in many cases -- also at a quantitative level. Examples are the prediction of temperature and major species, statistically stationary flames…
▽ More
Significant progress has been made on the model development for simulating turbulent reacting flows. As a consequence, we are currently in a position where key-physical aspects of fairly complex combustion processes are well understood at a qualitative and -- in many cases -- also at a quantitative level. Examples are the prediction of temperature and major species, statistically stationary flames, gas-phase combustion, turbulent transport, and turbulence/flame coupling. However, current challenges lie in capturing transient processes and stability boundaries, minor species and emissions, multiphase flows and phase-transition, as well as multidimensional flame/flow interactions that may involve flame curvature effects, stratification, partially premixing, or flame-wall interaction. With this, the question arises what steps need to be taken to elevate the current state of modeling capabilities in order to address these deficiencies? This paper seeks to address this question. We begin by reviewing the current state of combustion model approaches, our quest for improving existing models, the separation of errors arising from numerical discretization and physical models, and ideas on model evaluations. We then proceed by examining concepts on quantitative model evaluations, requirements on predictability, quantities of interest, and cost/accuracy trade-offs. We close by introducing recent concepts that assimilate time-resolved measurements into numerical simulations for state estimation, model evaluation, and parameter determination.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Convolutional LSTM Neural Networks for Modeling Wildland Fire Dynamics
Authors:
John Burge,
Matthew Bonanni,
Matthias Ihme,
Lily Hu
Abstract:
As the climate changes, the severity of wildland fires is expected to worsen. Models that accurately capture fire propagation dynamics greatly help efforts for understanding, responding to and mitigating the damages caused by these fires. Machine learning techniques provide a potential approach for develo** such models. The objective of this study is to evaluate the feasibility of using a Convol…
▽ More
As the climate changes, the severity of wildland fires is expected to worsen. Models that accurately capture fire propagation dynamics greatly help efforts for understanding, responding to and mitigating the damages caused by these fires. Machine learning techniques provide a potential approach for develo** such models. The objective of this study is to evaluate the feasibility of using a Convolutional Long Short-Term Memory (ConvLSTM) recurrent neural network to model the dynamics of wildland fire propagation. The machine learning model is trained on simulated wildfire data generated by a mathematical analogue model. Three simulated datasets are analyzed, each with increasing degrees of complexity. The simplest dataset includes a constant wind direction as a single confounding factor, whereas the most complex dataset includes dynamic wind, complex terrain, spatially varying moisture content and heterogenous vegetation density distributions. We examine how effective the ConvLSTM can learn the fire-spread dynamics over consecutive time steps. It is shown that ConvLSTMs can capture local fire transmission events, as well as the overall fire dynamics, such as the rate at which the fire spreads. Finally, we demonstrate that ConvLSTMs outperform other network architectures that have previously been used to model similar wildland fire dynamics.
△ Less
Submitted 8 April, 2021; v1 submitted 11 December, 2020;
originally announced December 2020.
-
A General Drag Coefficient for Flow over a Sphere
Authors:
Narendra Singh,
Michael Kroells,
Chenxi Li,
Eric Ching,
Matthias Ihme,
Christopher J. Hogan,
Thomas Schwartzentruber
Abstract:
A generalized physics-based expression for the drag coefficient of spherical particles moving in a fluid is derived. The proposed correlation incorporates essential rarefied physics, low-speed hydrodynamics, and shock-wave physics to accurately model the particle-drag force for a wide range of Mach and Knudsen numbers (and therefore Reynolds number) a particle may experience. Owing to the basis of…
▽ More
A generalized physics-based expression for the drag coefficient of spherical particles moving in a fluid is derived. The proposed correlation incorporates essential rarefied physics, low-speed hydrodynamics, and shock-wave physics to accurately model the particle-drag force for a wide range of Mach and Knudsen numbers (and therefore Reynolds number) a particle may experience. Owing to the basis of the derivation in physics-based scaling laws, the proposed correlation embeds gas-specific properties and has explicit dependence on the ratio of specific heat capacities at constant pressure and constant volume. The correlation is applicable for arbitrary particle relative velocity, particle diameter, gas pressure, gas temperature, and surface temperature. Compared to existing drag models, the correlation is shown to more accurately reproduce a wide range of experimental data. Finally, the new correlation is applied to simulate dust particles' trajectories in high-speed flow, relevant to a spacecraft entering the Martian atmosphere. The enhanced surface heat flux due to particle impact is found to be sensitive to the particle drag model.
△ Less
Submitted 8 December, 2020;
originally announced December 2020.
-
Deep Learning Models for Predicting Wildfires from Historical Remote-Sensing Data
Authors:
Fantine Huot,
R. Lily Hu,
Matthias Ihme,
Qing Wang,
John Burge,
Tianjian Lu,
Jason Hickey,
Yi-Fan Chen,
John Anderson
Abstract:
Identifying regions that have high likelihood for wildfires is a key component of land and forestry management and disaster preparedness. We create a data set by aggregating nearly a decade of remote-sensing data and historical fire records to predict wildfires. This prediction problem is framed as three machine learning tasks. Results are compared and analyzed for four different deep learning mod…
▽ More
Identifying regions that have high likelihood for wildfires is a key component of land and forestry management and disaster preparedness. We create a data set by aggregating nearly a decade of remote-sensing data and historical fire records to predict wildfires. This prediction problem is framed as three machine learning tasks. Results are compared and analyzed for four different deep learning models to estimate wildfire likelihood. The results demonstrate that deep learning models can successfully identify areas of high fire likelihood using aggregated data about vegetation, weather, and topography with an AUC of 83%.
△ Less
Submitted 10 February, 2021; v1 submitted 14 October, 2020;
originally announced October 2020.
-
Data-assisted combustion simulations with dynamic submodel assignment using random forests
Authors:
Wai Tong Chung,
Aashwin Ananda Mishra,
Nikolaos Perakis,
Matthias Ihme
Abstract:
In this investigation, we outline a data-assisted approach that employs random forest classifiers for local and dynamic combustion submodel assignment in turbulent-combustion simulations. This method is applied in simulations of a single-element GOX/GCH4 rocket combustor; a priori as well as a posteriori assessments are conducted to (i) evaluate the accuracy and adjustability of the classifier for…
▽ More
In this investigation, we outline a data-assisted approach that employs random forest classifiers for local and dynamic combustion submodel assignment in turbulent-combustion simulations. This method is applied in simulations of a single-element GOX/GCH4 rocket combustor; a priori as well as a posteriori assessments are conducted to (i) evaluate the accuracy and adjustability of the classifier for targeting different quantities-of-interest (QoIs), and (ii) assess improvements, resulting from the data-assisted combustion model assignment, in predicting target QoIs during simulation runtime. Results from the a priori study show that random forests, trained with local flow properties as input variables and combustion model errors as training labels, assign three different combustion models - finite-rate chemistry (FRC), flamelet progress variable (FPV) model, and inert mixing (IM) - with reasonable classification performance even when targeting multiple QoIs. Applications in a posteriori studies demonstrate improved predictions from data-assisted simulations, in temperature and CO mass fraction, when compared with monolithic FPV calculations. These results demonstrate that this data-driven framework holds promise for the dynamic combustion submodel assignment in reacting flow simulations.
△ Less
Submitted 17 January, 2021; v1 submitted 8 September, 2020;
originally announced September 2020.
-
Transcritical Mixing and Auto-Ignition of n-dodecane Liquid Fuel using a Diffused Interface Method
Authors:
Luis Bravo,
Peter C. Ma,
Matthias Ihme
Abstract:
High-fidelity simulations of transcritical spray mixing and auto ignition in a combustion chamber are performed at high pressure and temperature conditions using a recently developed finite rate LES solver. The simulation framework is based on a diffused-interface (DI) method that solves the compressible multi-species conservation equations along with the Peng Robinson state equation and real-flui…
▽ More
High-fidelity simulations of transcritical spray mixing and auto ignition in a combustion chamber are performed at high pressure and temperature conditions using a recently developed finite rate LES solver. The simulation framework is based on a diffused-interface (DI) method that solves the compressible multi-species conservation equations along with the Peng Robinson state equation and real-fluid transport properties. A finite volume approach with entropy stable scheme is employed to accurate simulate the non-linear real fluid flow. LES analysis is performed for non-reacting and reacting spray conditions targeting the ECN Spray A configuration at chamber conditions with a pressure of 60 bar and temperatures between 800 K and 1200 K to investigate effects of the real-fluid environment and low-temperature chemistry. Comparisons with measurements in terms of global spray parameters and mixture fraction distributions demonstrates the accuracy in modeling the turbulent mixing behavior. Good overall agreement of the auto-ignition process is obtained from simulation results at different ambient temperature conditions and the formation of intermediate species is captured by the simulations, indicating that the presented numerical framework adequately reproduces the corresponding low-and-high-temperature ignition processes under high-pressure conditions that are relevant to realistic diesel fuel injection systems.
△ Less
Submitted 23 September, 2018;
originally announced September 2018.
-
Computational Modeling and Analysis of Diesel-fuel Injection and Autoignition at Transcritical Conditions
Authors:
Matthias Ihme,
Peter C. Ma,
Luis Bravo
Abstract:
The need for improved engine efficiencies has motivated the development of high-pressure combustion systems, in which operating conditions achieve and exceed critical conditions. Associated with these conditions are strong variations in thermo-transport properties as the fluid undergoes phase transition, and two-stage ignition with low-temperature combustion. Accurately simulating these physical p…
▽ More
The need for improved engine efficiencies has motivated the development of high-pressure combustion systems, in which operating conditions achieve and exceed critical conditions. Associated with these conditions are strong variations in thermo-transport properties as the fluid undergoes phase transition, and two-stage ignition with low-temperature combustion. Accurately simulating these physical phenomena at real-fluid environments remains a challenge. By addressing this issue, a high-fidelity LES-modeling framework is developed to conduct simulations of transcritical fuel spray mixing and auto-ignition at high-pressure conditions. The simulation is based on a recently developed diffused interface method that solves the compressible multi-species conservation equations along with a Peng-Robinson state equation and real-fluid transport properties. LES analysis is performed for non-reacting and reacting spray conditions targeting the ECN Spray A configuration at chamber conditions with a pressure of 60 bar and temperatures between 900 K and 1200 K to investigate effects of the real-fluid environment and low-temperature chemistry. Comparisons with measurements in terms of global spray parameters (i.e., liquid and vapor penetration lengths) are shown to be in good agreement. Analysis of the mixture fraction distributions in the dispersed spray region demonstrates the accuracy in modelling the turbulent mixing behavior. Good agreement of the ignition delay time and the lift-off length is obtained from simulation results at different ambient temperature conditions and the formation of intermediate species is captured by the simulations, indicating that the presented numerical framework adequately reproduces the corresponding low- and high-temperature ignition processes under high-pressure conditions, which are relevant to realistic diesel-fuel injection systems.
△ Less
Submitted 23 September, 2018;
originally announced September 2018.
-
Lyapunov exponent and Wasserstein metric as validation tools for assessing short-time dynamics and quantitative model evaluation of large-eddy simulation
Authors:
Hao Wu,
Peter C. Ma,
Yu Lv,
Matthias Ihme
Abstract:
In this work, methods for the evaluation of LES-quality and LES-accuracy are presented, which include the Lyapunov exponent for the analysis of short-time predictability of LES-calculation and the Wasserstein metric for the quantitative assessment of simulation results. Both methods are derived and evaluated in application to the Volvo test case. Both the non-reacting and reacting cases are calcul…
▽ More
In this work, methods for the evaluation of LES-quality and LES-accuracy are presented, which include the Lyapunov exponent for the analysis of short-time predictability of LES-calculation and the Wasserstein metric for the quantitative assessment of simulation results. Both methods are derived and evaluated in application to the Volvo test case. Both the non-reacting and reacting cases are calculated. For the non- reacting cases, good agreement with the experimental data is achieved by solvers at high numerical resolution. The reacting cases are more challenging due to the small length scale of the flame and the suppression of sinuous mode of absolute instability by the density ratio. The analysis of the turbulent simulation data using the concept of the Lyapunov exponent and the Wasserstein metric provides a more quantitative approach to assess the mesh dependency of the simulation results. The convergence of the Lyapunov exponent is shown to be a more sensitive and stronger indication of mesh-independence. Though grid convergence for the reacting cases cannot be reached with the chosen resolutions, the Lyapunov exponents and the Wasserstein metric are shown to be capable of identifying quantity-specific sensitivities with respect to the numerical resolution, while requiring significantly less computational resources than acquiring profiles of conventional turbulent statistics.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Numerical analysis on mixing processes for transcritical real-fluid simulations
Authors:
Peter C. Ma,
Hao Wu,
Daniel T. Banuti,
Matthias Ihme
Abstract:
The accurate and robust simulation of transcritical real-fluid flows is crucial for many engineering applications. Diffused interface methods are frequently employed and several numerical schemes have been developed for simulating transcritical flows. These schemes can be categorized into two types, namely fully conservative and quasi-conservative schemes. An adaptive scheme which is a hybrid of t…
▽ More
The accurate and robust simulation of transcritical real-fluid flows is crucial for many engineering applications. Diffused interface methods are frequently employed and several numerical schemes have been developed for simulating transcritical flows. These schemes can be categorized into two types, namely fully conservative and quasi-conservative schemes. An adaptive scheme which is a hybrid of the two is developed in this study. By considering several numerical test cases, it is shown that different schemes predict distinctly different mixing behaviors. It is shown that the mixing processes follow the isobaric-adiabatic and isobaric-isochoric mixing models for fully and quasi-conservative schemes, respectively, and the adaptive scheme yields a mixing behavior that spans both models. The distinct mixing behaviors are a consequence of numerical diffusion instead of physical diffusion and can be attributed to insufficient numerical spatial resolution. This work provides a better understanding on the interpretation of numerical simulation results and the mixing models that are commonly used to study transcritical flows.
△ Less
Submitted 6 December, 2017;
originally announced December 2017.
-
Direct numerical simulations of turbulent channel flow under transcritical conditions
Authors:
Peter C. Ma,
Xiang I. A. Yang,
Matthias Ihme
Abstract:
Turbulent flows under transcritical conditions are present in regenerative cooling systems of rocker engines and extraction processes in chemical engineering. The turbulent flows and the corresponding heat transfer phenomena in these complex processes are still not well understood experimentally and numerically. The objective of this work is to investigate the turbulent flows under transcritical c…
▽ More
Turbulent flows under transcritical conditions are present in regenerative cooling systems of rocker engines and extraction processes in chemical engineering. The turbulent flows and the corresponding heat transfer phenomena in these complex processes are still not well understood experimentally and numerically. The objective of this work is to investigate the turbulent flows under transcritical conditions using DNS of turbulent channel flows. A fully compressible solver is used in conjunction with a Peng-Robinson real-fluid equation of state to describe the transcritical flows. A channel flow with two isothermal walls is simulated with one heated and one cooled boundary layers. The grid resolution adopted in this study is slightly finer than that required for DNS of incompressible channel flows. The simulations are conducted using both fully (FC) and quasi-conservative (QC) schemes to assess their performance for transcritical wall-bounded flows. The instantaneous flows and the statistics are analyzed and compared with the canonical theories. It is found that results from both FC and QC schemes qualitatively agree well with noticeable difference near the top heated wall, where spurious oscillations in velocity can be observed. Using the DNS data, we then examine the usefulness of Townsend attached eddy hypothesis in the context of flows at transcritical conditions. It is shown that the streamwise energy spectrum exhibits the inverse wavenumber scaling and that the streamwise velocity structure function follows a logarithmic scaling, thus providing support to the attached eddy model at transcritical conditions.
△ Less
Submitted 6 December, 2017;
originally announced December 2017.
-
Application of Pareto-efficient combustion modeling framework to large eddy simulations of turbulent reacting flows
Authors:
Hao Wu,
Peter C. Ma,
Thomas Jaravel,
Matthias Ihme
Abstract:
In the application of the combustion models based on low-dimensional manifolds (for instance flamelet models) to large-eddy simulation (LES) of reactive turbulent flows, the modeling simplifications of the combustion process is a critical source of uncertainty in addition to those due to the turbulent closure model and numerical discretization. The ability to quantitatively assess this uncertainty…
▽ More
In the application of the combustion models based on low-dimensional manifolds (for instance flamelet models) to large-eddy simulation (LES) of reactive turbulent flows, the modeling simplifications of the combustion process is a critical source of uncertainty in addition to those due to the turbulent closure model and numerical discretization. The ability to quantitatively assess this uncertainty in absence of the reference result is vital to the reliable and predictive simulations of practical combustion devices.In the present study, the Pareto-efficient combustion (PEC) framework is extended to adaptive LES combustion simulations of turbulent flames. The key component of the PEC framework is the so-called manifold drift term. Its extension LES is proposed to make such assessment by examining the compliance of a particular combustion model in describing a quantity of interest with respect to the underlying flow field representation. With the focus on improving predictions of CO emissions of flamelet-based combustion models, this work employs PEC to augment the flamelet/progress variable (FPV) model through local sub-model assignment of the finite-rate chemistry (FRC) model. To this end, a series of LES-PEC calculations are performed on a piloted partially-premixed dimethyl ether flame (DME-D), using a combination of FPV and FRC models. The drift term is utilized in the PEC framework to the estimate the model related error for quantities of interest. The PEC approach is demonstrated to be capable of significantly improving the prediction of CO emissions compared with the monolithic FPV simulation. The improved accuracy is achieved by enriching the FPV model with FRC in regions where the lower-order model is determined insufficient through the evaluation of drift terms.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Efficient time step** for reactive turbulent simulations with stiff chemistry
Authors:
Hao Wu,
Peter C. Ma,
Matthias Ihme
Abstract:
A combination of a steady-state preserving operator splitting method and a semi-implicit integration scheme is proposed for efficient time step** in simulations of unsteady reacting flows, such as turbulent flames, using detailed chemical kinetic mechanisms. The operator splitting is based on the Simpler balanced splitting method, which is constructed with improved stability properties and reduc…
▽ More
A combination of a steady-state preserving operator splitting method and a semi-implicit integration scheme is proposed for efficient time step** in simulations of unsteady reacting flows, such as turbulent flames, using detailed chemical kinetic mechanisms. The operator splitting is based on the Simpler balanced splitting method, which is constructed with improved stability properties and reduced computational cost. The method is shown to be capable of stable and accurate prediction of ignition and extinction for reaction-diffusion systems near critical conditions. The ROK4E scheme is designed for semi-implicit integration of spatially independent chemically reacting systems. Being a Rosenbrock-Krylov method, ROK4E utilizes the low-rank approximation of the Jacobian to reduce the cost for integrating the system of ODEs that have relative few stiff components. The efficiency of the scheme is further improved via the careful choice of coefficients to require three right-hand-side evaluations over four stages. Combing these two methods, efficient calculation is achieved for large-scale parallel simulations of turbulent flames.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Compositional inhomogeneities as a source of indirect combustion noise
Authors:
Luca Magri,
Jeff O'Brien,
Matthias Ihme
Abstract:
The generation of indirect combustion noise by compositional inhomogeneities is examined theoretically. For this, the compact nozzle theory of~\cite{MARBLE_CANDEL_JSV1977} is extended to a multi-component gas mixture, and the chemical potential function is introduced as an additional acoustic source mechanism. Transfer functions for subcritical and supercritical nozzle flows are derived and the co…
▽ More
The generation of indirect combustion noise by compositional inhomogeneities is examined theoretically. For this, the compact nozzle theory of~\cite{MARBLE_CANDEL_JSV1977} is extended to a multi-component gas mixture, and the chemical potential function is introduced as an additional acoustic source mechanism. Transfer functions for subcritical and supercritical nozzle flows are derived and the contribution of compositional noise is compared to entropy noise and direct noise by considering an idealized nozzle downstream of the combustor exit. It is shown that compositional noise is dependent on the local mixture composition and can exceed entropy noise for fuel-lean conditions and supercritical nozzle flows. This suggests that the compositional indirect noise requires potential consideration with the implementation of low-emission combustors.
△ Less
Submitted 26 September, 2017;
originally announced September 2017.
-
MVP-Workshop Contribution: Modeling of Volvo Bluff Flame Experiment and Comparison of Finite-Volume and Discontinuous-Galerkin Schemes
Authors:
Hao Wu,
Peter C. Ma,
Yu Lv,
Matthias Ihme
Abstract:
The Volvo burner features the canonical configuration of a bluff-body stabilized premixed flame. This configuration was studied experimentally under the Volvo Flygmotor AB program. Two cases are considered in this study: a non-reacting case with an inlet flow speed of 16.6 m/s and a reacting case with equilibrium ratio of 0.65 and inflow speed of 17.3 m/s. The characteristic vortex shedding in the…
▽ More
The Volvo burner features the canonical configuration of a bluff-body stabilized premixed flame. This configuration was studied experimentally under the Volvo Flygmotor AB program. Two cases are considered in this study: a non-reacting case with an inlet flow speed of 16.6 m/s and a reacting case with equilibrium ratio of 0.65 and inflow speed of 17.3 m/s. The characteristic vortex shedding in the wake behind the bluff body is present in the non-reacting case, while two oscillation modes are intermittently present in the reacting case. A series of large-eddy simulations are performed on this configuration using two solvers, one using a high-resolution finite-volume (FV) scheme and the other featuring a high-order discontinuous-Galerkin (DG) discretization. The FV calculations are conducted on hexahedral meshes with three different resolution (4mm, 2mm, and 1mm). The DG calculations are performed using two different polynomial orders on the same tetrahedral mesh. For the non-reacting cases, good agreement with respect to the experimental data is achieved by both solvers at high numerical resolution. The reacting cases are calculated using a two-step global mechanism in combination with the thickened-flame model. Reasonable agreement with experiments is obtained by both solvers at higher resolution. Models for combustion-turbulence interaction are necessary for the reacting case as it contains the length scale of the flame, which is smaller than the grid resolution in all calculations. The impact of such models on the flame stability and flow/flame dynamics is the subject of future research.
△ Less
Submitted 29 August, 2017; v1 submitted 18 July, 2017;
originally announced July 2017.
-
Modeling and Simulation of Diesel Injection at Transcritical Conditions
Authors:
Peter C. Ma,
Matthias Ihme,
Luis Bravo
Abstract:
The need for improved engine efficiencies has motivated the development of high-pressure combustion systems, in which operating conditions achieve and exceed critical conditions. Associated with these conditions are large thermodynamic gradients and strong variations in transport properties as the fluid undergoes mixing and phase transition. Accurately simulating these real-fluid environments rema…
▽ More
The need for improved engine efficiencies has motivated the development of high-pressure combustion systems, in which operating conditions achieve and exceed critical conditions. Associated with these conditions are large thermodynamic gradients and strong variations in transport properties as the fluid undergoes mixing and phase transition. Accurately simulating these real-fluid environments remains a main challenge. Different modeling approaches have been employed, which can be categorized as diffused and sharp interface methods. The objective of this study is to examine the diffused interface method for simulating diesel-fuel injection at conditions related to the supercritical regime. To this end, a recently developed compressible real-fluid solver for transcritical conditions is employed. Simulations of an ECN-relevant diesel-fuel injector are performed and predictions for instantaneous and statistical flow-field results are compared against available measurements. It is expected that results from this analysis will be useful in identifying limitations of current modeling techniques and in improving physical and numerical models for high-pressure injection systems.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
Numerical framework for transcritical real-fluid reacting flow simulations using the flamelet progress variable approach
Authors:
Peter C. Ma,
Daniel T. Banuti,
Jean-Pierre Hickey,
Matthias Ihme
Abstract:
An extension to the classical FPV model is developed for transcritical real-fluid combustion simulations in the context of finite volume, fully compressible, explicit solvers. A double-flux model is developed for transcritical flows to eliminate the spurious pressure oscillations. A hybrid scheme with entropy-stable flux correction is formulated to robustly represent large density ratios. The ther…
▽ More
An extension to the classical FPV model is developed for transcritical real-fluid combustion simulations in the context of finite volume, fully compressible, explicit solvers. A double-flux model is developed for transcritical flows to eliminate the spurious pressure oscillations. A hybrid scheme with entropy-stable flux correction is formulated to robustly represent large density ratios. The thermodynamics for ideal-gas values is modeled by a linearized specific heat ratio model. Parameters needed for the cubic EoS are pre-tabulated for the evaluation of departure functions and a quadratic expression is used to recover the attraction parameter. The novelty of the proposed approach lies in the ability to account for pressure and temperature variations from the baseline table. Cryogenic LOX/GH2 mixing and reacting cases are performed to demonstrate the capability of the proposed approach in multidimensional simulations. The proposed combustion model and numerical schemes are directly applicable for LES simulations of real applications under transcritical conditions.
△ Less
Submitted 9 April, 2017;
originally announced April 2017.
-
Numerical methods to prevent pressure oscillations in transcritical flows
Authors:
Peter C. Ma,
Yu Lv,
Matthias Ihme
Abstract:
The accurate and robust simulation of transcritical real-fluid effects is crucial for many engineering applications, such as fuel injection in internal combustion engines, rocket engines and gas turbines. For example, in diesel engines, the liquid fuel is injected into the ambient gas at a pressure that exceeds its critical value, and the fuel jet will be heated to a supercritical temperature befo…
▽ More
The accurate and robust simulation of transcritical real-fluid effects is crucial for many engineering applications, such as fuel injection in internal combustion engines, rocket engines and gas turbines. For example, in diesel engines, the liquid fuel is injected into the ambient gas at a pressure that exceeds its critical value, and the fuel jet will be heated to a supercritical temperature before combustion takes place. This process is often referred to as transcritical injection. The largest thermodynamic gradient in the transcritical regime occurs as the fluid undergoes a liquid-like to a gas-like transition when crossing the pseudo-boiling line (Yang 2000, Oschwald et al. 2006, Banuti 2015). The complex processes during transcritical injection are still not well understood. Therefore, to provide insights into high-pressure combustion systems, accurate and robust numerical simulation tools are required for the characterization of supercritical and transcritical flows.
△ Less
Submitted 29 May, 2017; v1 submitted 9 April, 2017;
originally announced April 2017.
-
A General Probabilistic Approach for Quantitative Assessment of LES Combustion Models
Authors:
Ross Johnson,
Hao Wu,
Matthias Ihme
Abstract:
The Wasserstein metric is introduced as a probabilistic method to enable quantitative evaluations of LES combustion models. The Wasserstein metric can directly be evaluated from scatter data or statistical results using probabilistic reconstruction against experimental data. The method is derived and generalized for turbulent reacting flows, and applied to validation tests involving the Sydney pil…
▽ More
The Wasserstein metric is introduced as a probabilistic method to enable quantitative evaluations of LES combustion models. The Wasserstein metric can directly be evaluated from scatter data or statistical results using probabilistic reconstruction against experimental data. The method is derived and generalized for turbulent reacting flows, and applied to validation tests involving the Sydney piloted jet flame. It is shown that the Wasserstein metric is an effective validation tool that extends to multiple scalar quantities, providing an objective and quantitative evaluation of model deficiencies and boundary conditions on the simulation accuracy. Several test cases are considered, beginning with a comparison of mixture-fraction results, and the subsequent extension to reactive scalars, including temperature and species mass fractions of \ce{CO} and \ce{CO2}. To demonstrate the versatility of the proposed method in application to multiple datasets, the Wasserstein metric is applied to a series of different simulations that were contributed to the TNF-workshop. Analysis of the results allowed to identify competing contributions to model deviations, arising from uncertainties in the boundary conditions and model deficiencies. These applications demonstrate that the Wasserstein metric constitutes an easily applicable mathematical tool that reduce multiscalar combustion data and large datasets into a scalar-valued quantitative measure.
△ Less
Submitted 5 June, 2017; v1 submitted 17 February, 2017;
originally announced February 2017.
-
An SMLD joint PDF model for turbulent non-premixed combustion using the flamelet progress-variable approach
Authors:
Alessandro Coclite,
Giuseppe Pascazio,
Pietro De Palma,
Luigi Cutrone,
Matthias Ihme
Abstract:
This paper provides an improved flamelet/progress variable (FPV) model for the simulation of turbulent combustion, employing the statistically most likely distribution (SMLD) approach for the joint probability density function (PDF) of the mixture fraction, Z, and of the progress parameter, Λ . Steady-state FPV models are built presuming the func- tional shape of the joint PDF of Z and Λ in order…
▽ More
This paper provides an improved flamelet/progress variable (FPV) model for the simulation of turbulent combustion, employing the statistically most likely distribution (SMLD) approach for the joint probability density function (PDF) of the mixture fraction, Z, and of the progress parameter, Λ . Steady-state FPV models are built presuming the func- tional shape of the joint PDF of Z and Λ in order to evaluate Favre-averages of thermody- namic quantities. The mixture fraction is widely assumed to behave as a passive scalar with a mono-modal behaviour modelled by a \b{eta} -distribution. Moreover, under the hypothesis that Z and Λ are statistically independent, the joint PDF coincides with the product of the two marginal PDFs. In this work we discuss these two constitutive hypotheses. The proposed model evaluates the most probable joint distribution of Z and Λ , relaxing some crucial as- sumption on their statistical behaviour. This provides a more general model in the context of FPV approach and an effective tool to verify the adequateness of widely used hypotheses. The model is validated versus experimental data of well-known test cases, namely, the San- dia flames. The results are also compared with those obtained by the standard FPV approach, analysing the role of the PDF functional form on turbulent combustion simulations.
△ Less
Submitted 20 April, 2015;
originally announced April 2015.
-
Entropy-Bounded Discontinuous Galerkin Scheme for Euler Equations
Authors:
Yu Lv,
Matthias Ihme
Abstract:
An entropy-bounded Discontinuous Galerkin (EBDG) scheme is proposed in which the solution is regularized by constraining the entropy. The resulting scheme is able to stabilize the solution in the vicinity of discontinuities and retains the optimal accuracy for smooth solutions. The properties of the limiting operator according to the entropy-minimum principle are proofed analytically, and an optim…
▽ More
An entropy-bounded Discontinuous Galerkin (EBDG) scheme is proposed in which the solution is regularized by constraining the entropy. The resulting scheme is able to stabilize the solution in the vicinity of discontinuities and retains the optimal accuracy for smooth solutions. The properties of the limiting operator according to the entropy-minimum principle are proofed analytically, and an optimal CFL-criterion is derived. We provide a rigorous description for locally imposing entropy constraints to capture multiple discontinuities. Significant advantages of the EBDG-scheme are the general applicability to arbitrary high-order elements and its simple implementation for two- and three-dimensional configurations. Numerical tests confirm the properties of the scheme, and particular focus is attributed to the robustness in treating discontinuities on arbitrary meshes.
△ Less
Submitted 18 November, 2014;
originally announced November 2014.